Chemicals and fuels from lipid-containing biomass: A comprehensive exploration

In response to address the climate crisis, there has been a growing focus on substituting conventional refinery-derived products with those derived from biorefineries. The utilization of lipids as primary materials or intermediates for the synthesis of chemicals and fuels, which are integral to the existing chemical and petrochemical industries, is a key step in this transition. This review provides a comprehensive overview of the production of sustainable chemicals (acids and alcohols), biopolymers, and fuels (including gasoline, kerosene, biodiesel, and heavy fuel oil) from lipids derived from terrestrial and algal biomass. The production of chemicals from lipids involves diverse methods, including polymerization, epoxidation, and separation/purification. Additionally, the transformation of lipids into biofuels can be achieved through processes such as catalytic cracking, hydroprocessing, and transesterification. This review also suggests future research directions that further advance the lipid valorization processes, including enhancement of catalyst durability at harsh conditions, development of deoxygenation process with low H2 consumption, investigation of precise separation of target compounds, increase in lipid accumulation in algal biomass, and development of methods that utilize residues and byproducts generated during lipid extraction and conversion.

Microalgae as a New Source of Oxylipins: A Comprehensive LC-MS-Based Analysis Using Conventional and Green Extraction Methods

Microalgae are promising sources of essential lipids, including omega-3 and omega-6 polyunsaturated fatty acids (n-3 and n-6 PUFA) and novel lipid metabolites like oxylipins. However, limited data exist on the oxylipin profile, its characterization, and the potential impact of the extraction process on these metabolites in microalgae. Thus, our study aimed to investigate the fatty acid and oxylipin profile of four microalgal species of interest (Microchloropsis gaditana, Tisochrysis lutea, Phaeodactylum tricornutum, and Porphyridium cruentum) while also examining the impact of the extraction method, with a focus on developing a greener process using ultrasound-assisted extraction (UAE) and ethanol. The UAE method showed similar oxylipin profiles, generally yielding concentrations comparable to those of the conventional Folch method. In total, 68 oxylipins derived from n-3 and n-6 PUFA were detected, with the highest concentrations of n-3 oxylipins found in P. tricornutum and T. lutea and of n-6 oxylipins in P. cruentum. This study provides the most extensive oxylipin characterization of these microalgae species to date, offering insights into alternative extraction methods and opening new avenues for further investigation of the significance of oxylipins in microalgae.

A comparative assessment of microbial biodiesel and its life cycle analysis

Biodiesel is a type of sustainable, biodegradable energy made from natural sources like vegetable oils, animal fat, and from microbes. Unlike traditional diesel, it has a lower carbon footprint and produces fewer harmful emissions when burned. Biodiesel has gained popularity as a more sustainable substitute for hydrocarbon-based diesel and may be utilized in diesel engines without any modification. In this review, biodiesel from microorganisms such as algae, yeast, and fungi and advantages over another feedstock were discussed. The life cycle evaluation of biodiesel is a thorough assessment of the ecological and economic effects of biodiesel production and use, from the extraction of raw ingredients to the waste disposal process. The life cycle analysis considers the entire process, including the production of feedstocks, the production of biodiesel, and the use of biodiesel in vehicles and other applications. Life cycle analysis of biodiesel produced from microorganisms takes into consideration the environmental impact and sustainability of each step in the production process, including the impact on land use, water use, greenhouse gas emissions, and the availability of resources. In this section, biodiesel produced from microorganisms and other raw materials, its comparisons, and also steps involved in the life cycle such as the cultivation of microorganisms, harvesting of biomass, and conversion to biodiesel were discussed. The processes like extraction and purification, hydrothermal liquefaction, and their environmental impacts were examined by using various LCA software from the previously mentioned process.

A Holistic Approach to Circular Bioeconomy Through the Sustainable Utilization of Microalgal Biomass for Biofuel and Other Value-Added Products

Emissions from transportation and industry primarily cause global warming, leading to floods, glacier melt, and rising seas. Widespread greenhouse gas emissions and resulting global warming pose significant risks to the environment, economy, and society. The need for alternative fuels drives the development of third-generation feedstocks: microalgae, seaweed, and cyanobacteria. These microalgae offer traits like rapid growth, high lipid content, non-competition with human food, and growth on non-arable land using brackish or waste water, making them promising for biofuel. These unique phototrophic organisms use sunlight, water, and carbon dioxide (CO2) to produce biofuels, biochemicals, and more. This review delves into the realm of microalgal biofuels, exploring contemporary methodologies employed for lipid extraction, significant value-added products, and the challenges inherent in their commercial-scale production. While the cost of microalgae bioproducts remains high, utilizing wastewater nutrients for cultivation could substantially cut production costs. Furthermore, this review summarizes the significance of biocircular economy approaches, which encompass the utilization of microalgal biomass as a feed supplement and biofertilizer, and biosorption of heavy metals and dyes. Besides, the discussion extends to the in-depth analysis and future prospects on the commercial potential of biofuel within the context of sustainable development. An economically efficient microalgae biorefinery should prioritize affordable nutrient inputs, efficient harvesting techniques, and the generation of valuable by-products.

Lipid Wizard: Analysis Software for Comprehensive Two-Dimensional Liquid Chromatography-Mass Spectrometry-Based Lipid Profiling

Lipids play a significant role in life activities and participate in the biological system through different pathways. Although comprehensive two-dimensional liquid chromatography-mass spectrometry (2DLC-MS) has been developed to profile lipid abundance changes, lipid identification and quantification from 2DLC-MS data remain a challenge. We created Lipid Wizard, open-source software for lipid assignment and isotopic peak stripping of the 2DLC-MS data. Lipid Wizard takes the peak list deconvoluted from the 2DLC-MS data as input and assigns each isotopic peak to the lipids recorded in the LIPID MAPS database by precursor ion m/z matching. The matched lipids are then filtered by the first-dimension retention time (1D RT), followed by the second-dimension retention time (2D RT), where the 2D RT of each lipid is predicted using an equivalent carbon number (ECN) model. The remaining assigned lipids are used for isotopic peak stripping via an iterative linear regression. The performance of Lipid Wizard was tested using a set of lipid standards and then applied to study the lipid changes in the livers of mice (fat-1) fed with alcohol.

Effects of different biofuels and their mixtures with diesel fuel on diesel engine performance and exhausts

In this study, a compression ignition engine that ran on recycled used cooking oil (RUCO), Jatropha curcas (JC), Pongamia Pinnata (PP), and petroleum diesel fuel (PDF) was investigated for its energy, performance, and exhaust emissions. The 20 % by volume RUCO, JC, and PP biofuel mix with PDF is taken. According to the American Society for Testing and Material (ASTM) standard, the blend qualities are evaluated. Viscosity, density, flash point, and heating value have all been tested for the 20 % blend. The outcome indicated that for a 20 % mix, the viscosity, density and flash point were all greater than in the PDF but heat value lower. Because studies have demonstrated that diesel engines can operate on 20 % replacement without any modifications, this study focused on 20 % blend. The engine was tested with loads (Ls) ranging from 0 % to 100 % of its entire capacity while the compression ratios (CRs) was varied. The experimental result demonstrated that the thermal efficiency, as measured by the PDF, was much greater than that of the DRUCO20, DJC20, and DPP20 blends. After the addition of RUCO, JC, and PP to PDF, the temperature of the exhaust gases reduced, and the engine used more gasoline as a result. It was discovered that an engine emissions of hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx) were lower than those of PDF. Even though it produced a greater amount of carbon dioxide (CO2) emissions, the DRUCO20 was superior to both the DCJ20 and the DPP20.

A mini review on microwave and contemporary based biohydrogen production technologies: a comparison

Hydrogen gas, along with conventional fossil fuels, has been used as a green fuel with enormous potential. Due to the rapid depletion of fossil fuels, a new dimension of hydrogen production technology has arrived to reduce reliance on nonrenewable energy sources. Microwave-based hydrogen production is a more promising and cost-effective technology than other existing green hydrogen production methods such as fermentation and gasification. Microwave heating may be superior to traditional heating due to several advantages such as less power consumption compared to other methods, higher yield, and a higher rate of conversion. Compared to another process for hydrogen production, the microwave-driven process worked efficiently at lower temperatures by providing more than 70% yield. The process of production can be optimized by using properly sized biomass, types of biomass, water flow, temperature, pressure, and reactor size. This method is the most suitable, attractive, and efficient technique for hydrogen production in the presence of a suitable catalyst. Hot spots formed by microwave irradiation would have a substantial impact on the yield and properties of microwave-processed goods. The current techno-economic situation of various technologies for hydrogen production is discussed here, with cost, efficiency, and durability being the most important factors to consider. The present review shows that a cost-competitive hydrogen economy will necessitate continual efforts to increase performance, scale-up, technical prospects, and political backing.

Microwave-Assisted Dispersive Liquid-Liquid Microextraction Combined with HPLC for the Determination of Three Biogenic Amines in Beverages

Microwave-assisted dispersive liquid-liquid microextraction (MADLLME) coupled with high-performance liquid chromatography (HPLC) with diode array detector was used for the extraction and determination of three biogenic amines (BAs), including tryptamine, histamine and phenylethylamine in beverages (beer, cherry juice and white spirit). Compared with solid-phase extraction, solid-phase microextraction and liquid-phase microextraction, which is more solvent use with lower extraction efficiency, this MADLLME method obviously shortened analytical time, the rapid heating of aqueous samples with non-ionizing electromagnetic radiation, a lower solvent use and enhanced extraction efficiency. Because of good extraction for three BAs, [3C6PC14][FeCl4] was used as an extraction solvent. We showed a tunable selectivity of magnetic ionic liquids (MILs) toward extracting BAs by changing anion or cation due to the modification of the interaction between the MIL and the BAs. Extraction conditions including the type and volume of extraction solvent, microwave power, microwave-assisted extraction time, sample pH, disperser and interference experiment were investigated. Under the optimal conditions, a good linear relationship was found in the concentration range of 100-2,000 ng mL-1 for three BAs with correlation coefficient (R2) of 0.995-0.999. The limit of detections (S/N = 3) and limit of quantitations (S/N = 10) were in the range of 3.46-4.96 ng mL-1 and 10.44-14.88 ng mL-1, respectively. The recoveries of three targets were in the range of 84.3-108.5%, and the relative standard deviations based on the peak areas for six replicate analyses of beverages spiked with 10, 50 and 100 ng mL-1 of each biogenic amine were lower than 7.9%. This method has also been successfully applied to analyze the real samples at three different spiked concentrations, and excellent results have been obtained.

Optimized infrared-assisted extraction to obtain total lipid from microalgae Scenedesmus obliquus: a green approach

Microalgae oil has great potential to address the growing energy demand and dependence on fossil fuels. However, the multilayered cell walls of microalgae hinder efficient extraction and enhanced lipid recovery. In this study, we develop a novel protocol based on near infrared-assisted extraction (NIRAE) technology to extract efficiently total lipids from Scenedesmus obliquus. Under a greener solvent extraction approach, the effect of nine non-polar/polar solvent systems in various ratios on lipid yield was tested, and the results were compared with Soxhlet, Folch, and Bligh–Dyer methods. The highest oil yields were NIRAE 15.43%, and Soxhlet 22.24%, using AcoEt/MeOH (1:2 v/v). For Folch and Bligh–Dyer, 9.11 and 10%, respectively. The optimized NIRAE conditions obtained using response surface methodology (RSM): 43.8 min, solvent/biomass 129.90:1 (m/v), and AcOEt/MeOH 0.57:2.43 (v/v) increased the oil yield significantly to 24.20%. In contrast to conventional methods, the overall optimized NIRAE process satisfied the requirements of a green extraction because of the simple and safe operation, less solvent toxicity, lower extraction time, and solvent and energy consumption.

Production of Fatty Acids and Derivatives Using Cyanobacteria

Fatty acids and their derivatives are highly valuable chemicals that can be produced through chemical or enzymatic processes using plant lipids. This may compete with human food sources. Therefore, there has been an urge to create a new method for synthesizing these chemicals. One approach is to use microbial cells, specifically cyanobacteria, as a factory platform. Engineering may need to be implemented in order to allow a cost-competitive production and to enable a production of a variety of different fatty acids and derivatives. In this chapter, we explain in details the importance of fatty acids and their derivatives, including fatty aldehydes, fatty alcohols, hydrocarbons, fatty acid methyl esters, and hydroxy fatty acids. The production of these chemicals using cyanobacterial native metabolisms together with strategies to engineer them are also explained. Moreover, recent examples of fatty acid and fatty acid derivative production from engineered cyanobacteria are gathered and reported. Commercial opportunities to manufacture fatty acids and derivatives are also discussed in this chapter. Altogether, it is clear that fatty acids and their derivatives are important chemicals, and with recent advancements in genetic engineering, a cyanobacterial platform for bio-based production is feasible. However, there are regulations and guidelines in place for the use of genetically modified organisms (GMOs) and some further developments are still needed before commercialization can be reached.

Multifarious extraction methodologies for ameliorating lipid recovery from algae

Amongst the current alternatives, algae were proven to be a promising source of biofuel, which is renewable and capable of meeting world demand for transportation fuels. However, a suitable lipid extraction method that efficiently releases the lipids from different algal strains remains a bottleneck. The multifarious pretreatment methods are prevalent in this field of lipid extraction, and therefore, this article has critically reviewed the various lipid extraction methods for ameliorating the lipid yield from algae, irrespective of the strains/species. Physical, mechanical, and chemical are the different types of pretreatment methods. In this review, methodologies such as homogenization, sonication, Soxhlet extraction, microwave treatment, and bead-beating, have been studied in detail and are the most commonly used methods for lipid extraction. Specific advanced/emerging processes such as supercritical CO₂ extraction, ionic liquid, and CO₂ switchable solvent-based algal lipid extraction are yet to be demonstrated at pilot-scale, though promising. The extraction of lipids has to be financially conducive, environmentally sustainable, and industrially applicable for further conversion into biodiesel. Hence, this paper discusses variable pretreatment for lipid extraction and imparts a comparative analysis to elect an efficient, economically sound lipid extraction method for pilot-scale biodiesel production.

CO2 bio-mitigation using genetically modified algae and biofuel production towards a carbon net-zero society

CO₂ sequestration carried by biological methodologies shows enhanced potential and has the advantage that biomass produced from the captured CO₂ can be used for different applications. Bio-mitigation of carbons through a micro-algal system addresses a promising and feasible option. This review mostly focused on the role of algae, particular mechanisms, bioreactors in algae cultivation, and genetically modified algae in CO₂ fixation and energy generation systems. A combination of CO₂ bio-mitigation and biofuel production might deliver an extremely promising alternative to current CO₂ mitigation systems. Bio mitigation in which the excess carbon is captured and bio fixation which the carbon is captured by algae or autotrophs and used for producing biofuel. This review revealed that steps for biofuel production from algae include factors affecting, harvesting techniques, oil extraction and transesterification. This review helps environmentalists and researchers to assess the effect of algae-based biorefinery on the green environment.

Coupling with in-situ electrochemical reactive chlorine species generation and two-phase partitioning method for enhanced microalgal biodiesel production

Microalgal-based biofuel production is of great significance in alleviating energy crisis and achieving carbon neutrality. However, the excessive costs and high solvent consumption in lipids extraction from microalgal obstruct the widespread application of biodiesel in practice. Reported herein is the construction of facile strategy for lipids extraction via electrocatalytic pretreatment and a subsequent two-phase partitioning method. Electrocatalytic pretreatment method adopts the solar as power source and avoids the drying of microalgal biomass, in favor of carbon neutrality requirement. During this process, eco-friendly electrode with high specific surface area could contribute to the sufficient generation of reactive chlorine species (RCS), facilitating the outflows of intracellular lipid. As a result, assisted with two-phase partitioning method, a satisfied performance of lipid recovery (86.72 %) was obtained. Notably, compared with traditional solvent method, two-phase partitioning method greatly reduced the dosage of organic solvent, which is an economical or environmental technique.

Optimization of Lipid Extraction from Spirulina spp. by Ultrasound Application and Mechanical Stirring Using the Taguchi Method of Experimental Design

The present study uses the Taguchi method of experimental design to optimize lipid extraction from Spirulina spp. by ultrasound application and mechanical stirring. A Taguchi L9 orthogonal array was used to optimize various parameters, such as methanol: chloroform (M:C) ratio, biomass: solvent ratio, and extraction time for lipid extraction. The results were analyzed using the signal-to-noise (S/N) ratio and analysis of variance (ANOVA). The biomass: solvent ratio significantly influenced lipid content (p < 0.05) with 92.1% and 92.3% contributions to the lipid and S/N ratio data, respectively. The extraction time presented a contribution value of 5.0%, while the M:C ratio presented the most negligible contribution of 0.4% for S/N data. The optimum extraction conditions were: M:C ratio of 1:1, biomass: solvent ratio of 1:60, and extraction time of 30 min. The predominant fatty acids were palmitic acid (44.5%), linoleic acid (14.9%), and gamma-linolenic acid (13.4%). The confirmation experiments indicated a lipid content of 8.7%, within a 95% confidence interval, proving the Taguchi method’s effectiveness in optimizing the process parameters for lipid extraction.

A review on unit operations, challenges, opportunities, and strategies to improve algal based biodiesel and biorefinery

Globally, the demand for energy is increasing with an emphasis on green fuels for a sustainable future. As the urge for alternative fuels is accelerating, microalgae have emerged as a promising source that can not only produce high lipid but many other platform chemicals. Moreover, it is a better alternative in comparison to conventional feedstock due to yearlong easy and mass cultivation, carbon fixation, and value-added products extraction. To date, numerous studies have been done to elucidate these organisms for large-scale fuel production. However, enhancing the lipid synthesis rate and reducing the production cost still remain a major bottleneck for its economic viability. Therefore, this study compiles information on algae-based biodiesel production with an emphasis on its unit operations from strain selection to biofuel production. Additionally, strategies to enhance lipid accumulation by incorporating genetic, and metabolic engineering and the use of leftover biomass for harnessing bio-products have been discussed. Besides, implementing a biorefinery for extracting oil followed by utilizing leftover biomass to generate value-added products such as nanoparticles, biofertilizers, biochar, and biopharmaceuticals has also been discussed.

Characterization of a newly isolated self-flocculating microalga Bracteacoccus pseudominor BERC09 and its evaluation as a candidate for a multiproduct algal biorefinery

Microalgae have the highest capability to fix the atmospheric carbon and wastewater-derived nutrients to produce high-value bioproducts including lipids and carotenoids. However, their lower titers and single-product-oriented biomass processing have made the overall process expensive. Hence, increased metabolite titer and processing of the biomass for more than one product are required to ensure the commercial robustness of the algal biorefinery. In this study, a newly isolated algal strain was identified as Bracteacoccus pseudominor BERC09 through phylogenetic analysis based on the 18S rRNA gene sequence. Basic characterization of the strain revealed its promising potential to produce carotenoids and lipids. The lipids and carotenoid biosynthesis pathways of BERC09 were further triggered by manipulating the abiotic factors including nitrogen sources (NaNO₃, KNO₃, NH₄Cl, Urea), nitrogen concentrations (0.06-0.36 gL^-1), light intensity (150 μmolm^-2s^-1 to 300 μmolm^-2s^-1), and light quality (white and blue). Resultantly, 300 μmolm^-2s^-1 of blue light yielded 0.768 gL^-1 of biomass, 8.4 mgg^-1 of carotenoids, and 390 mgg^-1 of lipids, and supplementation of 0.36 gL^-1 of KNO₃ further improved metabolism and yielded 0.814 gL^-1 of biomass, 11.86 mgg^-1 of carotenoids, and 424 mgg^-1 of lipids. Overall, the optimal combination of light and nitrogen concurrently improved biomass, carotenoids, and lipids by 3.5-fold, 6-fold, and 4-fold than control, respectively. Besides, the excellent glycoproteins-based self-flocculation ability of the strain rendered an easier harvesting via gravity sedimentation. Hence, this biomass can be processed in a cascading fashion to use this strain as a candidate for a multiproduct biorefinery to achieve commercial robustness and environmental sustainability.

Amelioration for oxidative stability and bioavailability of N-3 PUFA enriched microalgae oil: an overview

Technological improvements in dietary supplements and nutraceuticals have highlighted the significance of bioactive molecules in a healthy lifestyle. Eicosapentaenoic acid and Cervonic acid (DHA), omega-3 polyunsaturated fatty acids seem to be famed for their ability to prevent diverse physiological abnormalities. Selection of appropriate pretreatments and extraction techniques for extraction of lipids from robust microalgae cell wall are very important to retain their stability and bioactivity. Therefore, extraction techniques with optimized extraction parameters offer an excellent approach for obtaining quality oil with a high yield. Oils enriched in omega-3 are particularly imperiled to oxidation which ultimately affects customer acceptance. Bio active encapsulation could be one of the effective approaches to overcome this dilemma. This review paper aims to give insight into the cultivation methods, and downstream processes, various lipid extraction approaches, techniques for retaining oxidative stability, bioavailability and food applications based on extracted or encapsulated omega-3.

Cell adaptation of the extremophilic red microalga Galdieria sulphuraria to the availability of carbon sources

Global energy demand and fossil fuels impact on climate can be partially managed by an increase in the use of biofuels for transports and industries. Biodiesel production is generally preceded by a transesterification process of the green biomass triacylglycerols that generates large amounts of glycerol as a by-product. In this study, the extremophilic red microalga Galdieria sulphuraria 074W was cultivated in heterotrophy. The microalgal growth parameters and biomass composition were compared when grown on an equivalent molar concentration of carbon of either glucose or glycerol as unique carbon source. The maximal biomass reached in these two conditions was not significantly different (∼2.5 g.L^-1). Fatty acid profile, protein and storage carbohydrate contents were also statistically similar, irrespectively of the metabolized carbon source. We also observed that the pigment content of G. sulphuraria cells decreased during heterotrophic growth compared to photoautotrophic cultivated cells, and that this diminution was more important in the presence of glucose than glycerol: cells were yellowish in the presence of glucose and green in the presence of glycerol. The pigmentation was restored when glucose was totally consumed in the medium, suggesting that the presence of glucose repressed pigment synthesis. Based on this observation, a transcriptome analysis was performed in order to better understand the mechanisms involved in the loss of color mediated by darkness and by glucose in G. sulphuraria. Three conditions were analyzed: heterotrophy with glycerol or glucose and phototrophy. This allowed us to understand the transcriptional response of cells to light and dark environments both at the nuclear and chloroplast levels, and to show that transcription of gene families, acquired by horizontal gene transfer, such as sugar, amino acid, or acetate transporters, were involved in the response to the availability of different (in)organic sources.

North by Southwest: Screening the Naturally Isolated Microalgal Strains from Different Habitats of Iran for Various Pharmaceutical and Biotechnology Applications

Background and Aims

Microalgae are known as a promising source for food, pharmaceutical, and biofuel production while providing environmental advantages. The present study evaluates some newly isolated microalgal strains from north and southwest of Iran as a potential source for high-value products.

Methods

Primitive screening was carried out regarding growth parameters. The molecular and morphological identifications of the selected strains were performed using 18S rRNA gene sequencing. After phylogenic and evolutionary studies, the selected microalgal strains were characterized in terms of protein and pigment content, in addition to the fatty acid profile content. Besides, the CO₂ fixation rate was determined to assess capability for various environmental applications.

Results

All of the selected strains were predominantly belonging to Scenedesmus sp. and Desmodesmus sp. The isolated Scenedesmus sp. VN 009 possessed the highest productivity content and CO₂ fixation rate of 0.054 g·L⁻¹d⁻¹ and 0.1 g·L⁻¹d⁻¹, respectively. Moreover, data from GC/MS analysis demonstrated the high robustness of this strain to produce several valuable fatty acids including α-linolenic acid and linoleic acid in 45% and 20% of total fatty acids.

Conclusions

The identified strains have a great but different potential for SCP, β-carotene, and ω-3 production, as well as CO₂ fixation for environmental purposes. In this study, considering the wide range of microalgal strains in different habitats of Iran, the potential applications of native microalgae for various pharmaceutical, food, and biotechnology purposes were investigated.

Technoeconomic Evaluation of Microalgae Oil Production: Effect of Cell Disruption Method

Microalgae have a high capacity to capture CO2. Additionally, biomass contains lipids that can be used to produce biofuels, biolubricants, and other compounds of commercial interest. This study analyzed various scenarios for microalgae lipid production by simulation. These scenarios include cultivation in raceway ponds, primary harvest with three flocculants, secondary harvest with pressure filter (and drying if necessary), and three different technologies for the cell disruption step, which facilitates lipid extraction. The impact on energy consumption and production cost was analyzed. Both energy consumption and operating cost are higher in the scenarios that consider bead milling (8.79–8.88 kWh/kg and USD 41.06–41.41/kg), followed by those that consider high-pressure homogenization (HPH, 5.39–5.46 kWh/kg and USD 34.26–34.71/kg). For the scenarios that consider pressing, the energy consumption is 5.80–5.88 kWh/kg and the operating cost is USD 27.27–27.88/kg. The consumption of CO2 in scenarios that consider pressing have a greater capture (11.23 kg of CO2/kg of lipids). Meanwhile, scenarios that consider HPH are the lowest consumers of fresh water (5.3 m3 of water/kg of lipids). This study allowed us to develop a base of multiple comparative scenarios, evaluate different aspects involved in Chlorella vulgaris lipid production, and determine the impact of various technologies in the cell disruption stage.

Fatty Acid Composition and Cytotoxic Activity of Lipid Extracts from Nannochloropsis gaditana Produced by Green Technologies

Microalgae are alternatives and sustainable sources of omega-3 long chain-polyunsaturated fatty acids (LC-PUFA). However, the eco-friendly extraction of these bioactives remains unexplored. In this work, the use of enzyme-based methods in combination with ultrasounds was evaluated as green approaches to extract the omega-3 lipids from Nannochloropsis gaditana. Three commercial enzymatic solutions (Viscozyme® L, Celluclast® 1.5 L, and Saczyme®) were investigated, and results were compared with the traditional Folch method. A promising extraction approach was developed by using Saczyme®, achieving a lipid yield of 25.7% ± 0.5, comparable to the traditional method (27.3% ± 0.7) (p > 0.05). Similar omega-3 content was found by GC−MS analysis for both lipid extracts (30.2% ± 2.4 and 29.3% ± 0.8 for the green and the traditional method, respectively), showing that the green approaches did not affect the fatty acid profile. Moreover, the cytotoxic activity of produced lipids was assessed by comparing human colon cancer cells (HCT-116) and epithelial nontumorigenic immortalized cells (HCEC-1CT). Results suggest that the lipid extracts have a selective effect, reducing the viability of the colon carcinoma cells but not the nontumorigenic cells. Thus, this study provides new eco-innovative approaches for extracting the omega-3 LC-PUFA from microalgae with promising biological properties.

Recovering Microalgal Bioresources: A Review of Cell Disruption Methods and Extraction Technologies

Microalgae have evolved into a promising sustainable source of a wide range of compounds, including protein, carbohydrates, biomass, vitamins, animal feed, and cosmetic products. The process of extraction of intracellular composites in the microalgae industry is largely determined by the microalgal species, cultivation methods, cell wall disruption techniques, and extraction strategies. Various techniques have been applied to disrupt the cell wall and recover the intracellular molecules from microalgae, including non-mechanical, mechanical, and combined methods. A comprehensive understanding of the cell disruption processes in each method is essential to improve the efficiency of current technologies and further development of new methods in this field. In this review, an overview of microalgal cell disruption techniques and an analysis of their performance and challenges are provided. A number of studies on cell disruption and microalgae extraction are examined in order to highlight the key challenges facing the field of microalgae and their future prospects. In addition, the amount of product recovery for each species of microalgae and the important parameters for each technique are discussed. Finally, pulsed electric field (PEF)-assisted treatments, which are becoming an attractive option due to their simplicity and effectiveness in extracting microalgae compounds, are discussed in detail.

Production, Processing, and Protection of Microalgal n-3 PUFA-Rich Oil

Microalgae have been increasingly considered as a sustainable “biofactory” with huge potentials to fill up the current and future shortages of food and nutrition. They have become an economically and technologically viable solution to produce a great diversity of high-value bioactive compounds, including n-3 polyunsaturated fatty acids (PUFA). The n-3 PUFA, especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), possess an array of biological activities and positively affect a number of diseases, including cardiovascular and neurodegenerative disorders. As such, the global market of n-3 PUFA has been increasing at a fast pace in the past two decades. Nowadays, the supply of n-3 PUFA is facing serious challenges as a result of global warming and maximal/over marine fisheries catches. Although increasing rapidly in recent years, aquaculture as an alternative source of n-3 PUFA appears insufficient to meet the fast increase in consumption and market demand. Therefore, the cultivation of microalgae stands out as a potential solution to meet the shortages of the n-3 PUFA market and provides unique fatty acids for the special groups of the population. This review focuses on the biosynthesis pathways and recombinant engineering approaches that can be used to enhance the production of n-3 PUFA, the impact of environmental conditions in heterotrophic cultivation on n-3 PUFA production, and the technologies that have been applied in the food industry to extract and purify oil in microalgae and protect n-3 PUFA from oxidation.

Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development

Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.

High-value biochemical products & applications of freshwater eukaryotic microalgae

A shift in public perception of the health and nutritional benefits of organic supplements and skin care products has led to a surge in high-value products being extracted from microalgae. Traditional forms of microalgae products were proteins, lipids and carbohydrates. However, in recent times the extraction of carotenoids (pigments), polyunsaturated acids (PUFAs), vitamins, phytosterols and polyphenols has increased significantly. Despite the diversity of products most research has failed to scale up production to industrial scale due to economic constraints and productivity capacities. It is clear that the main market drivers are the pharmaceutical and nutraceutical industries. This paper reviews the high-value products produced from freshwater eukaryotic microalgae. In addition, the paper also considers the biochemical properties of eukaryotic microalgae to provide a comparative analysis of different strains based on their high-value product content.

Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants

Lubricants are materials able to reduce friction and/or wear of any type of moving surfaces facilitating smooth operations, maintaining reliable machine functions, and reducing risks of failures while contributing to energy savings. At present, most worldwide used lubricants are derived from crude oil. However, production, usage and disposal of these lubricants have significant impact on environment and health. Hence, there is a growing pressure to reduce demand of this sort of lubricants, which has fostered development and use of green lubricants, as vegetable oil-based lubricants (biolubricants). Despite the ecological benefits of producing/using biolubricants, availability of the required raw materials and agricultural land to create a reliable chain supply is still far from being established. Recently, biomass from some microalgae species has attracted attention due to their capacity to produce high-value lipids/oils for potential lubricants production. Thus, this multidisciplinary work reviews the main chemical-physical characteristics of lubricants and the main attempts and progress on microalgae biomass production for developing oils with pertinent lubricating properties. In addition, potential microalgae strains and chemical modifications to their oils to produce lubricants for different industrial applications are identified. Finally, a guide for microalgae oil selection based on its chemical composition for specific lubricant applications is provided.

Untargeted metabolomics of the alkaliphilic cyanobacterium Plectonema terebrans elucidated novel stress-responsive metabolic modulations

Alkaliphilic cyanobacteria are suitable candidates to study the effect of alkaline wastewater cultivation on molecular metabolic responses. In the present study, the impact of wastewater, alkalinity, and alkaline wastewater cultivation was studied on the biomass production, biochemical composition, and the alkalinity responsive molecular mechanism through metabolomics. The results suggested a 1.29 to 1.44-fold higher biomass production along with improved lipid, carbohydrate, and pigment production under alkaline wastewater cultivation. The metabolomics analysis showed 1.2-fold and 5.54-fold increase in the indole-acetic acid and phytoene biosynthesis which contributed to overall enhanced cell differentiation and photo-protectiveness. Furthermore, lower levels of Ribulose-1,5-bisphosphate (RuBP), and higher levels of 2-phosphoglycerate and 3-phosphoglycerate suggested the efficient fixation of CO₂ into biomass, and storage compounds including polysaccharides, lipids, and sterols. Interestingly, except L-histidine and L-phenylalanine, all the metabolites related to protein biosynthesis were downregulated in response to wastewater and alkaline wastewater cultivation. The cells protected themselves from alkalinity and nutrient stress by improving the biosynthesis of sterols, non-toxic antioxidants, and osmo-protectants. Alkaline wastewater cultivation regulated the activation of carbon concentration mechanism (CCM), glycolysis, fatty-acid biosynthesis, and shikimate pathway. The data revealed the importance of alkaline wastewater cultivation for improved CO₂ fixation, wastewater treatment, and producing valuable bioproducts including phytoene, Lyso PC 18:0, and sterols. These metabolic pathways could be future targets of metabolic engineering for improving biomass and metabolite production. SIGNIFICANCE: Alkalinity is an imperative factor, responsible for the contamination control and biochemical regulation in cyanobactera, especially during the wastewater cultivation. Currently, understanding of alkaline wastewater responsive molecular mechanism is lacking and most of the studies are focused on transcriptomics of model organisms for this purpose. In this study, untargeted metabolomics was employed to analyze the impact of wastewater and alkaline wastewater on the growth, CO₂ assimilation, nutrient uptake, and associated metabolic modulations of the alkaliphilic cyanobacterium Plectonema terebrans BERC10. Results unveiled that alkaline wastewater cultivation regulated the activation of carbon concentration mechanism (CCM), glycolysis, fatty-acid biosynthesis, and shikimate pathway. It indicated the feasibility of alkaline wastewater as promising low-cost media for cyanobacterium cultivation. The identified stress-responsive pathways could be future genetic targets for strain improvement.

Screening of Phospholipids in Plasma of Large-Artery Atherosclerotic and Cardioembolic Stroke Patients With Hydrophilic Interaction Chromatography-Mass Spectrometry

Ischemic stroke (IS) is a deadly and debilitating disease with a high incidence and recurrence rate in elderly people worldwide. Large-artery atherosclerotic (LAA) and cardioembolic (CE) stroke are two leading subtypes and require different management. As a complementary biochemistry method for current diagnostic techniques, a sensitive and accurate phospholipid (PL) targeted lipidomic method was developed in this study. Plasma PLs were selectively extracted with titanium dioxide/fibrous silica nanosphere material, then characterized and quantified with hydrophilic interaction chromatography-mass spectrometry. A total of 31 molecular species of PLs were determined and ten biomarkers including seven molecular species of sphingomyelins (SM d18:1/18:1, d18:1/18:0, d18:1/24:1, d18:1/16:1, d18:1/22:1, d18:1/24:2, and d18:1/16:0) and three molecular species of phosphatidylcholines (16:0/18:1, 16:0/18:2 and 16:0/22:6) showed significant differences in LAA, CE, and healthy control (HC) groups. The independent diagnostic capabilities of these PL biomarkers were successfully evaluated and validated with receiver operating characteristic curves. Additionally, the oleic acid-enriched SMs, which can result in atherogenic lipoprotein aggregation, were proved to be positively related to IS and may perform as the potential risk factors in the future. Meanwhile, valuable suggestions for dietary interventions as an essential source of endogenous PLs could be obtained from this study.

Oligocat: Oligoesters as Pseudo-Homogenous Catalysts for Biodiesel Synthesis

Biodiesel production from first-generation feedstock has shown a strong correlation with the increase in deforestation and the necessity of larger areas for land farming. Recent estimation from the European Federation for Transport and Environment evidenced that since the 2000s decade, an area equal to the Netherlands was deforested to supply global biodiesel demand, mainly originating from first-generation feedstock. Nevertheless, biodiesel is renewable, and it can be a greener source of energy than petroleum. A promising approach to make biodiesel independent from large areas of farming is to shift as much as possible the biodiesel production chain to second and third generations of feedstock. The second generation presents three main advantages, where it does not compete with the food industry, its commercial value is negligible, or none, and its usage as feedstock for biodiesel production reduces the overall waste disposal. In this manuscript, we present an oligomeric catalyst designed to be multi-functional for second-generation feedstock transesterification reactions, mainly focusing our efforts to optimize the conversion of tallow fat and sauteing oil to FAME and FAEE, applying our innovative catalyst. Named as Oligocat, our catalyst acts as a Brønsted-Lowry acid catalyst, providing protons to the reaction medium, and at the same time, with the course of the reaction, it sequesters glycerol molecules from the medium and changes its physical phase during the transesterification reaction. With this set of properties, Oligocat presents a pseudo-homogenous behavior, reducing the purification and separation steps of the biodiesel process production. Reaction conditions were optimized applying a 4² factorial planning. The output parameter evaluated was the conversion rate of triacylglycerol to mono alkyl esters, measured through gel permeation chromatography (GPC). After the optimization studies, a conversion yield of 96.7 (±1.9) wt% was achieved, which allows classifying the obtained mono alkyl esters as biodiesel by ASTM D6751 or EN 14214:2003. After applying the catalyst in three reaction cycles, Oligocat still presented a conversion rate above 96.5 wt% and as well an excellent recovery rate.

Feasibility of Utilizing Wastewaters for Large-Scale Microalgal Cultivation and Biofuel Productions Using Hydrothermal Liquefaction Technique: A Comprehensive Review

The two major bottlenecks faced during microalgal biofuel production are, (a) higher medium cost for algal cultivation, and (b) cost-intensive and time consuming oil extraction techniques. In an effort to address these issues in the large scale set-ups, this comprehensive review article has been systematically designed and drafted to critically analyze the recent scientific reports that demonstrate the feasibility of microalgae cultivation using wastewaters in outdoor raceway ponds in the first part of the manuscript. The second part describes the possibility of bio-crude oil production directly from wet algal biomass, bypassing the energy intensive and time consuming processes like dewatering, drying and solvents utilization for biodiesel production. It is already known that microalgal drying can alone account for ∼30% of the total production costs of algal biomass to biodiesel. Therefore, this article focuses on bio-crude oil production using the hydrothermal liquefaction (HTL) process that converts the wet microalgal biomass directly to bio-crude in a rapid time period. The main product of the process, i.e., bio-crude oil comprises of C16-C20 hydrocarbons with a reported yield of 50–65 (wt%). Besides elucidating the unique advantages of the HTL technique for the large scale biomass processing, this review article also highlights the major challenges of HTL process such as update, and purification of HTL derived bio-crude oil with special emphasis on deoxygenation, and denitrogenation problems. This state of art review article is a pragmatic analysis of several published reports related to algal crude-oil production using HTL technique and a guide towards a new approach through collaboration of industrial wastewater bioremediation with rapid one-step bio-crude oil production from chlorophycean microalgae.

Lipids from Hermetia illucens, an Innovative and Sustainable Source

The exponential increase of global demand for proteins and lipids can no longer be satisfied by classical sources. High amounts of CO2 produced by intensive livestock breeding and its effects on the environment are the main factors that prevent the use of animals as primary sources for proteins and lipids, calling for the use of new sustainable sources, such as insects. The massive breeding of bioconverter insects as a feed source has been a major topic in recent years, with both economic and scientific aspects related to rearing and subsequent processing optimization. The larvae of Hermetia illucens (Diptera: Stratiomyidae) (also known as Black Soldier Fly) can be used for the eco-sustainable production of proteins and lipids with high biological and economic value. Lipids can be obtained from BSF bioconversion processes and are present in high quantities in the last instar larvae and prepupae. Fats obtained from BSF are used as animal feed ingredients, in the formulation of several products for personal care, and in biodiesel production. To enable the use of insect-derived lipids, it is important to understand how to optimize their extraction. Here, we summarize the published information on the composition, the extraction methods, and the possible applications of the BSF lipid component.

Acetonitrile allows indirect replacement of nondeuterated lipid detergents by deuterated lipid detergents for the nuclear magnetic resonance study of detergent-soluble proteins

Detergent-soluble proteins (DSPs) are commonly dissolved in lipid buffers for NMR experiments, but the huge lipid proton signal prevents recording of high-quality spectra. The use of costly deuterated lipids is thus required to replace nondeuterated ones. With conventional methods, detergents like dodecylphosphocholine (DPC) cannot be fully exchanged due to their high binding affinity to hydrophobic proteins. We propose an original and simple protocol which combines the use of acetonitrile, dialysis and lyophilization to disrupt the binding of lipids to the protein and allow their indirect replacement by their deuterated equivalents, while maintaining the native structure of the protein. Moreover, by this protocol, the detergent-to-protein molar ratio can be controlled as it challenges the protein structure. This protocol was applied to solubilize the Vpx protein that was followed upon addition of DPC-d₃₈ by ¹ H-¹⁵ N SOFAST-HMQC spectra and the best detergent-to-DSPs molar ratio was obtained for structural studies.

Potential of cyanobacteria in the conversion of wastewater to biofuels

Environmental and energy security has now become a serious global problem, requiring a lot of research to find and implement its cost-effective and environmentally friendly alternatives. The development and use of renewable energy sources is necessary and important in order to avoid the emergence of a global economic crisis. One of the solution to prevent a future crisis caused by energy shortages is to introduce biofuels into the fuel market. Despite the fact that various forms of renewable energy are currently used, the prospects for the production of biofuels from cyanobacteria are quite high due to their unique properties, such as a high lipid content and a suitable fatty acid (FA) composition for the production of biofuels, their suitability for growing open water and the ability to grow on wastewater. The purpose of this article is to provide a comprehensive overview of the potential of cyanobacteria in the conversion of wastewater into biofuels. The article covers comparative data on the accumulation of lipids and the content of fatty acids in various representatives of cyanobacteria and their possibilities in the remediation of wastewater. Various approaches to the extraction of lipids from phototrophic microorganisms that are currently available, their advantages and disadvantages, and the results of the monitoring of the main key points of the development of the technology for converting cyanobacterial biomass into biofuels, with an emphasis on the existing barriers, effects and solutions, are also considered. Further research in this field is required for the successful implementation of this technology on an industrial scale.

Current Pretreatment/Cell Disruption and Extraction Methods Used to Improve Intracellular Lipid Recovery from Oleaginous Yeasts

The production of lipids from oleaginous yeasts involves several stages starting from cultivation and lipid accumulation, biomass harvesting and finally lipids extraction. However, the complex and relatively resistant cell wall of yeasts limits the full recovery of intracellular lipids and usually solvent extraction is not sufficient to effectively extract the lipid bodies. A pretreatment or cell disruption method is hence a prerequisite prior to solvent extraction. In general, there are no recovery methods that are equally efficient for different species of oleaginous yeasts. Each method adopts different mechanisms to disrupt cells and extract the lipids, thus a systematic evaluation is essential before choosing a particular method. In this review, mechanical (bead mill, ultrasonication, homogenization and microwave) and nonmechanical (enzyme, acid, base digestions and osmotic shock) methods that are currently used for the disruption or permeabilization of oleaginous yeasts are discussed based on their principle, application and feasibility, including their effects on the lipid yield. The attempts of using conventional and “green” solvents to selectively extract lipids are compared. Other emerging methods such as automated pressurized liquid extraction, supercritical fluid extraction and simultaneous in situ lipid recovery using capturing agents are also reviewed to facilitate the choice of more effective lipid recovery methods.

Microalgae Biomolecules: Extraction, Separation and Purification Methods

Several microalgae species have been exploited due to their great biotechnological potential for the production of a range of biomolecules that can be applied in a large variety of industrial sectors. However, the major challenge of biotechnological processes is to make them economically viable, through the production of commercially valuable compounds. Most of these compounds are accumulated inside the cells, requiring efficient technologies for their extraction, recovery and purification. Recent improvements approaching physicochemical treatments (e.g., supercritical fluid extraction, ultrasound-assisted extraction, pulsed electric fields, among others) and processes without solvents are seeking to establish sustainable and scalable technologies to obtain target products from microalgae with high efficiency and purity. This article reviews the currently available approaches reported in literature, highlighting some examples covering recent granted patents for the microalgae’s components extraction, recovery and purification, at small and large scales, in accordance with the worldwide trend of transition to bio-based products.

Microalgae Cultivation Technologies as an Opportunity for Bioenergetic System Development—Advantages and Limitations

Microalgal biomass is currently considered as a sustainable and renewable feedstock for biofuel production (biohydrogen, biomethane, biodiesel) characterized by lower emissions of hazardous air pollutants than fossil fuels. Photobioreactors for microalgae growth can be exploited using many industrial and domestic wastes. It allows locating the commercial microalgal systems in areas that cannot be employed for agricultural purposes, i.e., near heating or wastewater treatment plants and other industrial facilities producing carbon dioxide and organic and nutrient compounds. Despite their high potential, the large-scale algal biomass production technologies are not popular because the systems for biomass production, separation, drainage, and conversion into energy carriers are difficult to explicitly assess and balance, considering the ecological and economical concerns. Most of the studies presented in the literature have been carried out on a small, laboratory scale. This significantly limits the possibility of obtaining reliable data for a comprehensive assessment of the efficiency of such solutions. Therefore, there is a need to verify the results in pilot-scale and the full technical-scale studies. This study summarizes the strengths and weaknesses of microalgal biomass production technologies for bioenergetic applications.

A review on microalgae cultivation and harvesting, and their biomass extraction processing using ionic liquids

The richness of high-value bio-compounds derived from microalgae has made microalgae a promising and sustainable source of useful product. The present work starts with a review on the usage of open pond and photobioreactor in culturing various microalgae strains, followed by an in-depth evaluation on the common harvesting techniques used to collect microalgae from culture medium. The harvesting methods discussed include filtration, centrifugation, flocculation, and flotation. Additionally, the advanced extraction technologies using ionic liquids as extractive solvents applied to extract high-value bio-compounds such as lipids, carbohydrates, proteins, and other bioactive compounds from microalgae biomass are summarized and discussed. However, more work needs to be done to fully utilize the potential of microalgae biomass for the application in large-scale production of biofuels, food additives, and nutritive supplements.

Towards green extraction methods from microalgae learning from the classics

Microalgae started receiving attention as producers of third generation of biofuel, but they are rich in many bioactive compounds. Indeed, they produce many molecules endowed with benefic effects on human health which are highly requested in the market. Thus, it would be important to fractionate algal biomass into its several high-value compounds: this represents the basis of the microalgal biorefinery approach. Usually, conventional extraction methods have been used to extract a single class of molecules, with many side effects on the environment and on human health. The development of a green downstream platform could help in obtaining different class of molecules with high purity along with low environmental impact. This review is focused on technical advances that have been performed, from classic methods to the newest and green ones. Indeed, it is fundamental to set up new procedures that do not affect the biological activity of the extracted molecules. A comparative analysis has been performed among the conventional methods and the new extraction techniques, i.e., switchable solvents and microwave-assisted and compressed fluid extractions.

Lipid Extraction Maximization and Enzymatic Synthesis of Biodiesel from Microalgae

Microalgae has received overwhelming attention worldwide as a sustainable source for energy generation. However, the production of biofuel from microalgae biomass consists of several steps, of which lipid extraction is the most important one. Because of the nature of feedstock, extraction needs special attention. Three different methods were studied to extract algal oil from two different algae variant, Chlorella sp. and Spirulina sp. The highest percentage oil yield was obtained by ultrasonication (9.4% for Chlorella sp., 6.6% for Spirulina sp.) followed by the Soxhlet and solvent extraction processes. Ultrasonication and Soxhlet extraction processes were further optimized to maximize oil extraction as solvent extraction was not effective in extracting lipid. For ultrasonication, an amplitude of 90% recorded the highest percentage yield of oil for Spirulina sp. and a 70% amplitude recorded the highest percentage yield of oil for Chlorella sp. On the other hand, for Soxhlet extraction, a combination of chloroform, hexane, and methanol at a 1:1:1 ratio resulted in the highest yield of algal oil. Afterward, the crude algae oil from the ultrasonication process was transesterified for 5 h using an immobilized lipase (Novozyme 435) at 40 °C to convert triglycerides into fatty acid methyl ester and glycerol. Thus, ultrasonic-assisted lipid extraction was successful in producing biodiesel from both the species.

Recent advances in downstream processing of microalgae lipid recovery for biofuel production

The world energy system faces two major challenges: the requirement for more energy and less carbon. It is important to address biofuels production as an alternative to the usage of fossil fuel by utilizing microalgae as the potential feedstock. Yet, the commercialization of microalgae remains contentious caused by factors relating to the life cycle assessment and feasibility of microalgae-based biofuels. This present review starts with an introduction to the benefits of microalgae, followed by intensive elaboration on microalgae cultivation parameters. Subsequently, the fundamental principle along with the advantages and disadvantages of various pretreatment techniques of microalgae were reviewed. In addition, the conventional and recent advances in lipid extraction techniques from microalgae were comprehensively evaluated. Comparative analysis regard to the gaps from previous studies was discussed point-by-point in each section. The effort presented in this review will provide an insight for future researches dealing with microalgae-biofuel production on downstream processing.

Current application of electrical pre-treatment for enhanced microalgal biomolecules extraction

Pretreatment of microalgal biomass possessing rigid cell wall is a critical step for enhancing the efficiency of microalgal biorefinery. However, the conventional pretreatment processes suffer the drawbacks of complex processing steps, long processing time, low conversion efficiency and high processing costs. This significantly hinders the industrial applicability of microalgal biorefinery. The innovative electricity-aid pretreatment techniques serve as a promising processing tool to extensively enhance the release of intracellular substances from microalgae. In this review, application of electric field-based techniques and recent advances of using electrical pretreatments on microalgae cell focusing on pulsed electric field, electrolysis, high voltage electrical discharges and moderate electric field are reviewed. In addition, the emerging techniques integrating electrolysis with liquid biphasic flotation process as promising downstream approach is discussed. This review delivers broad knowledge of the present significance of the application of these methods focusing on the development of electric assisted biomolecules extraction from microalgae.