Molecular mechanisms of Saccharomyces cerevisiae stress adaptation and programmed cell death in response to acetic acid

Integrative analysis of transcriptome and metabolome profiling uncovers underlying mechanisms of the enhancement of the synthesis of biofilm in Sporobolomyces pararoseus NGR under acidic conditions

BACKGROUND

Sporobolomyces pararoseus is a well-studied oleaginous red yeast that can synthesize a variety of high value-added bioactive compounds. Biofilm is one of the important biological barriers for microbial cells to resist environmental stresses and maintain stable fermentation process. Here, the effect of acidic conditions on the biosynthesis of biofilms in S. pararoseus NGR was investigated through the combination of morphology, biochemistry, and multi-omics approaches.

RESULTS

The results showed that the acidic environment was the key factor to trigger the biofilm formation of S. pararoseus NGR. When S. pararoseus NGR was cultured under pH 4.7, the colony morphology was wrinkled, the cells were wrapped by a large amount of extracellular matrix, and the hydrophobicity and anti-oxidative stress ability were significantly improved, and the yield of intracellular carotenoids was significantly increased. Transcriptome and metabolome profiling indicated that carbohydrate metabolism, amino acid metabolism, lipid metabolism, and nucleic acid metabolism in S. pararoseus NGR cells were significantly enriched in biofilm cells under pH 4.7 culture conditions, including 56 differentially expressed genes and 341 differential metabolites.

CONCLUSIONS

These differential genes and metabolites may play an important role in the formation of biofilms by S. pararoseus NGR in response to acidic stress. The results will provide strategies for the development and utilization of beneficial microbial biofilms, and provide theoretical support for the industrial fermentation production of microorganisms to improve their resistance and maintain stable growth.

Engineering cellular redox homeostasis to optimize ethanol production in xylose-fermenting Saccharomyces cerevisiae strains

The transition from fossil fuels dependency to embracing renewable alternatives is pivotal for mitigating greenhouse gas emissions, with biorefineries playing a central role at the forefront of this transition. As a sustainable alternative, lignocellulosic feedstocks hold great promise for biofuels and biochemicals production. However, the effective utilization of complex sugars, such as xylose, remains a significant hurdle. To address this challenge, yeasts can be engineered as microbial platforms to convert the complex sugars derived from biomass. The efficient use of xylose by XR-XDH strains still poses a significant challenge due to redox imbalance limitations, leading to the accumulation of undesirable by-products. In this study, we focused on engineering the industrial S. cerevisiae strain PE-2, known for its robustness, and compared different strategies to balance cellular redox homeostasis, guided by a genome-scale metabolic model. Flux balance analysis guided the selection of four approaches: i. decoupling NADPH regeneration from CO2 production; ii. altering XDH cofactor affinity; iii. shifting XR cofactor preference; iv. incorporating alternate phosphoketolase and acetic acid conversion pathways. A comparative time-course targeted metabolic profile was conducted to assess the redox status of xylose-fermenting cells under anaerobic conditions. The main limitations of xylose-fermenting strains were tested and the replacement of xylose reductase with a NADH-preferred XR in the LVY142 strain proved to be the most effective strategy, resulting in an increase in ethanol yield and productivity, coupled with a reduction in by-products. Comparative analysis of various genetic approaches provided valuable insights into the complexities of redox engineering, highlighting the need for tailored strategies in yeast metabolic engineering for efficient biofuels and biochemicals production from lignocellulosic feedstocks.

Genetic Interaction Between F-Box Encoding UCC1 and RRM3 Regulates Growth Rate, Cell Size, and Stress Tolerance in Saccharomyces cerevisiae

Ucc1, an F-box motif-containing protein of Saccharomyces cerevisiae encoded by UCC1 regulates energy metabolism through proteasomal degradation of citrate synthase Cit2 and inactivation of the glyoxylate cycle when glucose is present as the main carbon source in the growth medium. Rrm3, a Pif1 family DNA helicase, encoded by RRM3 regulates the movement of the replication forks during the DNA replication process. Here in this study, we present evidence of binary genetic interaction between both the genes, UCC1 and RRM3, that determine the growth rate, cell morphology, cell size, apoptosis, and stress response. The absence of both genes UCC1 and RRM3 leads to altered cell morphology, increased growth rate, utilization of alternate carbon sources, resistance to hydrogen peroxide, and susceptibility to acetic acid-induced apoptosis. Further, the genetic interaction network analysis shows both the genes UCC1 and RRM3 interaction through the SGS1 and cross-link among metabolic, glyoxylate, DNA replication, and retrograde signaling pathways.

Overexpression of arginase gene CAR1 renders yeast Saccharomyces cerevisiae acetic acid tolerance

Acetic acid is a common inhibitor present in lignocellulose hydrolysate, which inhibits the ethanol production by yeast strains. Therefore, the cellulosic ethanol industry requires yeast strains that can tolerate acetic acid stress. Here we demonstrate that overexpressing a yeast native arginase-encoding gene, CAR1, renders Saccharomyces cerevisiae acetic acid tolerance. Specifically, ethanol yield increased by 27.3% in the CAR1-overexpressing strain compared to the control strain under 5.0 g/L acetic acid stress. The global intracellular amino acid level and compositions were further analyzed, and we found that CAR1 overexpression reduced the total amino acid content in response to acetic acid stress. Moreover, the CAR1 overexpressing strain showed increased ATP level and improved cell membrane integrity. Notably, we demonstrated that the effect of CAR1 overexpression was independent of the spermidine and proline metabolism, which indicates novel mechanisms for enhancing yeast stress tolerance. Our studies also suggest that CAR1 is a novel genetic element to be used in synthetic biology of yeast for efficient production of fuel ethanol.

Precise Lineage Tracking Using Molecular Barcodes Demonstrates Fitness Trade-offs for Ivermectin Resistance in Nematodes

A fundamental tenet of evolutionary genetics is that the direction and strength of selection on individual loci varies with the environment. Barcoded evolutionary lineage tracking is a powerful approach for high-throughput measurement of selection within experimental evolution that to date has largely been restricted to studies within microbial systems, largely because the random integration of barcodes within animals is limited by physical and molecular protection of the germline. Here, we use the recently developed TARDIS barcoding system in Caenorhabditis elegans (Stevenson et al., 2023) to implement the first randomly inserted genomic-barcode experimental evolution animal model and use this system to precisely measure the influence of the concentration of the anthelmintic compound ivermectin on the strength of selection on an ivermectin resistance cassette. The combination of the trio of knockouts in neuronally expressed GluCl channels, avr-14, avr-15, and glc-1, has been previously demonstrated to provide resistance to ivermectin at high concentrations. Varying the concentration of ivermectin in liquid culture allows the strength of selection on these genes to be precisely controlled within populations of millions of individuals, yielding the largest animal experimental evolution study to date. The frequency of each barcode was determined at multiple time points via sequencing at deep coverage and then used to estimate the fitness of the individual lineages in the population. The mutations display a high cost to resistance at low concentrations, rapidly losing out to wildtype genotypes, but the balance tips in their favor when the ivermectin concentration exceeds 2nM. This trade-off in resistance is likely generated by a hindered rate of development in resistant individuals. Our results demonstrate that C. elegans can be used to generate high precision estimates of fitness using a high-throughput barcoding approach to yield novel insights into evolutionarily and economically important traits.

25SrRNA Methyltransferase CgBMT5 From Candida glycerinogenes Improves Tolerance and Fermentation Performance of Saccharomyces cerevisiae and Yarrowia lipolytica From Undetoxified Cellulose Hydrolysate

The hydrolysis of cellulose generates inhibitors like acetate, suppressing fermentation performance. Here, 25SrRNA methyltransferase CgBMT5 from stress-tolerant yeast Candida glycerinogenes was used as an anti-stress gene element in Saccharomyces cerevisiae and Yarrowia lipolytica. Expression of CgBMT5 in S. cerevisiae increased cell tolerance to acetate, high osmolarity, and heat stress and rescued the delay in cell growth under acetate stress. Ethanol productivity was improved from 0.52 g·(L/h) to 0.69 g·(L/h). CgBMT5 improved GFP expression. The transcription factor ARG81 binds to the promoter of CgBMT5. CgBMT5 upregulated HOG1, GPD1, HAA1, and PMA1 and reduced ROS level, thereby improving cell resistance to acetate. CgBMT5 also improved resistance of Y. lipolytica Po1g to multiple-stress. The lipid titer was improved by 37% in the typical medium. Y. lipolytica-CgBMT5 produced 94 mg/L lipid in the undetoxified cellulose hydrolysate.

Differential Protein Expression in Set5p-Mediated Acetic Acid Stress Response and Novel Targets for Engineering Yeast Stress Tolerance

Acetic acid is a prevalent inhibitor in lignocellulosic hydrolysate, which represses microbial growth and bioproduction. Histone modification and chromatin remodeling have been revealed to be critical for regulating eukaryotic metabolism. However, related studies in chronic acetic acid stress responses remain unclear. Our previous studies revealed that overexpression of the histone H4 methyltransferase Set5p enhanced acetic acid stress tolerance of the budding yeast Saccharomyces cerevisiae. In this study, we examined the role of Set5p in acetic acid stress by analyzing global protein expression. Significant activation of intracellular protein expression under the stress was discovered, and the functions of the differential proteins were mainly involved in chromatin modification, signal transduction, and carbohydrate metabolism. Notably, a substantial increase of Set5p expression was observed in response to acetic acid stress. Functional studies demonstrated that the restriction of the telomere capping protein Rtc3p, as well as Ies3p and Taf14p, which are related to chromatin regulation, was critical for yeast stress response. This study enriches the understanding of the epigenetic regulatory mechanisms underlying yeast stress response mediated by histone-modifying enzymes. The results also benefit the development of robust yeast strains for lignocellulosic bioconversion.

Synthesis, structure-activity relationship and biological evaluation of indole derivatives as anti-Candida albicans agents

In this work, we synthesized a series of indole derivatives to cope with the current increasing fungal infections caused by drug-resistant Candida albicans. All compounds were evaluated for antifungal activities against Candida albicans in vitro, and the structure-activity relationships (SARs) were analyzed. The results indicated that indole derivatives used either alone or in combination with fluconazole showed good activities against fluconazole-resistant Candida albicans. Further mechanisms studies demonstrated that compound 1 could inhibit yeast-to-hypha transition and biofilm formation of Candida albicans, increase the activity of the efflux pump, the damage of mitochondrial function, and the decrease of intracellular ATP content. In vivo studies, further proved the anti-Candida albicans activity of compound 1 by histological observation. Therefore, compound 1 could be considered as a novel antifungal agent.

New biomarkers underlying acetic acid tolerance in the probiotic yeast Saccharomyces cerevisiae var. boulardii

Evolutionary engineering experiments, in combination with omics technologies, revealed genetic markers underpinning the molecular mechanisms behind acetic acid stress tolerance in the probiotic yeast Saccharomyces cerevisiae var. boulardii. Here, compared to the ancestral Ent strain, evolved yeast strains could quickly adapt to high acetic acid levels (7 g/L) and displayed a shorter lag phase of growth. Bioinformatic-aided whole-genome sequencing identified genetic changes associated with enhanced strain robustness to acetic acid: a duplicated sequence in the essential endocytotic PAN1 gene, mutations in a cell wall mannoprotein (dan4Thr192del), a lipid and fatty acid transcription factor (oaf1Ser57Pro) and a thiamine biosynthetic enzyme (thi13Thr332Ala). Induction of PAN1 and its associated endocytic complex SLA1 and END3 genes was observed following acetic acid treatment in the evolved-resistant strain when compared to the ancestral strain. Genome-wide transcriptomic analysis of the evolved Ent acid-resistant strain (Ent ev16) also revealed a dramatic rewiring of gene expression among genes associated with cellular transport, metabolism, oxidative stress response, biosynthesis/organization of the cell wall, and cell membrane. Some evolved strains also displayed better growth at high acetic acid concentrations and exhibited adaptive metabolic profiles with altered levels of secreted ethanol (4.0-6.4% decrease), glycerol (31.4-78.5% increase), and acetic acid (53.0-60.3% increase) when compared to the ancestral strain. Overall, duplication/mutations and transcriptional alterations are key mechanisms driving improved acetic acid tolerance in probiotic strains. We successfully used adaptive evolutionary engineering to rapidly and effectively elucidate the molecular mechanisms behind important industrial traits to obtain robust probiotic yeast strains for myriad biotechnological applications. KEY POINTS: •Acetic acid adaptation of evolutionary engineered robust probiotic yeast S. boulardii •Enterol ev16 with altered genetic and transcriptomic profiles survives in up to 7 g/L acetic acid •Improved acetic acid tolerance of S. boulardii ev16 with mutated PAN1, DAN4, OAF1, and THI13 genes.

OptEnvelope: A target point guided method for growth-coupled production using knockouts

Finding the best knockout strategy for coupling biomass growth and production of a target metabolite using a mathematic model of metabolism is a challenge in biotechnology. In this research, a three-step method named OptEnvelope is presented based on finding minimal set of active reactions for a target point in the feasible solution space (envelope) using a mixed-integer linear programming formula. The method initially finds the reduced desirable solution space envelope in the product versus biomass plot by removing all inactive reactions. Then, with reinsertion of the deleted reactions, OptEnvelope attempts to reduce the number of knockouts so that the desirable production envelope is preserved. Additionally, OptEnvelope searches for envelopes with higher minimum production rates or fewer knockouts by evaluating different target points within the desired solution space. It is possible to limit the maximal number of knockouts. The method was implemented on metabolic models of E. coli and S. cerevisiae to test the method benchmarking the capability of these industrial microbes for overproduction of acetate and glycerol under aerobic conditions and succinate and ethanol under anaerobic conditions. The results illustrate that OptEnvelope is capable to find multiple strong coupled envelopes located in the desired solution space because of its novel target point oriented strategy of envelope search. The results indicate that E. coli is more appropriate to produce acetate and succinate while S. cerevisiae is a better host for glycerol production. Gene deletions for some of the proposed reaction knockouts have been previously reported to increase the production of these metabolites in experiments. Both organisms are suitable for ethanol production, however, more knockouts for the adaptation of E. coli are required. OptEnvelope is available at https://github.com/lv-csbg/optEnvelope.

Exploring pineapple peel hydrolysate as a sustainable carbon source for xylitol production

This study explores utilizing pineapple peel (PP) hydrolysate as a promising carbon source for xylitol production, covering scopes from the pre-treatment to the fermentation process. The highest xylose concentration achieved was around 20 g/L via mild acid hydrolysis (5% nitric acid, 105 °C, 20-min residence time) with a solid loading of 10%. Two sets fermentability experiments were carried out of varying pH levels in synthetic media that includes acetic acid as the main inhibitors and hydrolysate supplemented with diverse nitrogen source. The results revealed that pH 7 exhibited the highest xylitol production, yielding 0.35 g/g. Furthermore, urea was found to be a highly promising and cost-effective substitute for yeast extract, as it yielded a comparable xylitol production of 0.31 g/g with marginal difference of only 0.01 g/g compared to yeast extract further highlights the viability of urea as the preferred option for reducing xylitol production cost. The absence of a significant difference between the synthetic media and hydrolysate, with only a marginal variance of 0.35 to 0.32 g/g, implies that acetic acid is indeed the primary constraint in xylitol production using PP hydrolysate. The study sheds light on PP biomass's potential for xylitol production, aligning economic benefits with environmental sustainability and waste management.

Gcn4 impacts metabolic fluxes to promote yeast chronological lifespan

Aging is characterized by a gradual decline in physiological integrity, which impairs functionality and increases susceptibility to mortality. Dietary restriction, mimicking nutrient scarcity without causing malnutrition, is an intervention known to decelerate the aging process. While various hypotheses have been proposed to elucidate how dietary restriction influences aging, the underlying mechanisms remain incompletely understood. This project aimed to investigate the role of the primary regulator of the general amino acid control (GAAC) pathway, the transcription factor Gcn4, in the aging process of S. cerevisiae cells. Under conditions of amino acid deprivation, which activate Gcn4, the deletion of GCN4 led to a diverse array of physiological changes in the cells. Notably, the absence of Gcn4 resulted in heightened mitochondrial activity, likely contributing to the observed increase in reactive oxygen species (ROS) accumulation. Furthermore, these mutant gcn4Δ cells exhibited reduced ethanol production despite maintaining similar glucose consumption rates, suggesting a pivotal role for Gcn4 in regulating the Crabtree effect. Additionally, there was a marked reduction in trehalose, the storage carbohydrate, within the mutant cells compared to the wild-type strain. The intracellular content of free amino acids also exhibited disparities between the wild-type and GCN4-deficient strains. Taken together, our findings indicate that the absence of GCN4 disrupts cellular homeostasis, triggering significant alterations in interconnected intracellular metabolic pathways. These disruptions have far-reaching metabolic consequences that ultimately culminate in a shortened lifespan.

Investigation of the acetic acid stress response in Saccharomyces cerevisiae with mutated H3 residues

Enhanced levels of acetic acid reduce the activity of yeast strains employed for industrial fermentation-based applications. Therefore, unraveling the genetic factors underlying the regulation of the tolerance and sensitivity of yeast towards acetic acid is imperative for optimising various industrial processes. In this communication, we have attempted to decipher the acetic acid stress response of the previously reported acetic acid-sensitive histone mutants. Revalidation using spot-test assays and growth curves revealed that five of these mutants, viz., H3K18Q, H3S28A, H3K42Q, H3Q68A, and H3F104A, are most sensitive towards the tested acetic acid concentrations. These mutants demonstrated enhanced acetic acid stress response as evidenced by the increased expression levels of AIF1, reactive oxygen species (ROS) generation, chromatin fragmentation, and aggregated actin cytoskeleton. Additionally, the mutants exhibited active cell wall damage response upon acetic acid treatment, as demonstrated by increased Slt2-phosphorylation and expression of cell wall integrity genes. Interestingly, the mutants demonstrated increased sensitivity to cell wall stress-causing agents. Finally, screening of histone H3 N-terminal tail truncation mutants revealed that the tail truncations exhibit general sensitivity to acetic acid stress. Some of these N-terminal tail truncation mutants viz., H3 [del 1-24], H3 [del 1-28], H3 [del 9-24], and H3 [del 25-36] are also sensitive to cell wall stress agents such as Congo red and caffeine suggesting that their enhanced acetic acid sensitivity may be due to cell wall stress induced by acetic acid.

Metabolic Changes and Antioxidant Response in Ustilago maydis Grown in Acetate

Ustilago maydis is an important model to study intermediary and mitochondrial metabolism, among other processes. U. maydis can grow, at very different rates, on glucose, lactate, glycerol, and ethanol as carbon sources. Under nitrogen starvation and glucose as the only carbon source, this fungus synthesizes and accumulates neutral lipids in the form of lipid droplets (LD). In this work, we studied the accumulation of triacylglycerols in cells cultured in a medium containing acetate, a direct precursor of the acetyl-CoA required for the synthesis of fatty acids. The metabolic adaptation of cells to acetate was studied by measuring the activities of key enzymes involved in glycolysis, gluconeogenesis, and the pentose phosphate pathways. Since growth on acetate induces oxidative stress, the activities of some antioxidant enzymes were also assayed. The results show that cells grown in acetate plus nitrate did not increase the amount of LD, but increased the activities of glutathione reductase, glutathione peroxidase, catalase, and superoxide dismutase, suggesting a higher production of reactive oxygen species in cells growing in acetate. The phosphofructokinase-1 (PFK1) was the enzyme with the lowest specific activity in the glycolytic pathway, suggesting that PFK1 controls the flux of glycolysis. As expected, the activity of the phosphoenolpyruvate carboxykinase, a gluconeogenic enzyme, was present only in the acetate condition. In summary, in the presence of acetate as the only carbon source, U. maydis synthesized fatty acids, which were directed into the production of phospholipids and neutral lipids for biomass generation, but without any excessive accumulation of LD.

Adaptive responses of yeast strains tolerant to acidic pH, acetate, and supraoptimal temperature

Ethanol fermentations can be prematurely halted as Saccharomyces cerevisiae faces adverse conditions, such as acidic pH, presence of acetic acid, and supraoptimal temperatures. The knowledge on yeast responses to these conditions is essential to endowing a tolerant phenotype to another strain by targeted genetic manipulation. In this study, physiological and whole-genome analyses were conducted to obtain insights on molecular responses which potentially render yeast tolerant towards thermoacidic conditions. To this end, we used thermotolerant TTY23, acid tolerant AT22, and thermo-acid tolerant TAT12 strains previously generated by adaptive laboratory evolution (ALE) experiments. The results showed an increase in thermoacidic profiles in the tolerant strains. The whole-genome sequence revealed the importance of genes related to: H⁺, iron, and glycerol transport (i.e., PMA1, FRE1/2, JEN1, VMA2, VCX1, KHA1, AQY3, and ATO2); transcriptional regulation of stress responses to drugs, reactive oxygen species and heat-shock (i.e., HSF1, SKN7, BAS1, HFI1, and WAR1); and adjustments of fermentative growth and stress responses by glucose signaling pathways (i.e., ACS1, GPA1/2, RAS2, IRA2, and REG1). At 30 °C and pH 5.5, more than a thousand differentially expressed genes (DEGs) were identified in each strain. The integration of results revealed that evolved strains adjust their intracellular pH by H⁺ and acetic acid transport, modify their metabolism and stress responses via glucose signaling pathways, control of cellular ATP pools by regulating translation and de novo synthesis of nucleotides, and direct the synthesis, folding and rescue of proteins throughout the heat-shock stress response. Moreover, the motifs analysis in mutated transcription factors suggested a significant association of SFP1, YRR1, BAS1, HFI1, HSF1, and SKN7 TFs with DEGs found in thermoacidic tolerant yeast strains. KEY POINTS: • All the evolved strains overexpressed the plasma membrane H⁺ -ATPase PMA1 at optimal conditions • Tolerant strain TAT12 mutated genes encoding weak acid and heat response TFs HSF1, SKN7, and WAR1 • TFs HSF1 and SKN7 likely controlled the transcription of metabolic genes associated to heat and acid tolerance.

Dark fermentation and microalgae cultivation coupled systems: Outlook and challenges

The implementation of a sustainable bio-based economy is considered a top priority today. There is no doubt about the necessity to produce renewable bioenergy and bio-sourced chemicals to replace fossil-derived compounds. Under this scenario, strong efforts have been devoted to efficiently use organic waste as feedstock for biohydrogen production via dark fermentation. However, the technoeconomic viability of this process needs to be enhanced by the valorization of the residual streams generated. The use of dark fermentation effluents as low-cost carbon source for microalgae cultivation arises as an innovative approach for bioproducts generation (e.g., biodiesel, bioactive compounds, pigments) that maximizes the carbon recovery. In a biorefinery context, after value-added product extraction, the spent microalgae biomass can be further valorised as feedstock for biohydrogen production. This integrated process would play a key role in the transition towards a circular economy. This review covers recent advances in microalgal cultivation on dark fermentation effluents (DFE). BioH₂ via dark fermentation processes and the involved metabolic pathways are detailed with a special focus on the main aspects affecting the effluent composition. Interesting traits of microalgae and current approaches to solve the challenges associated to the integration of dark fermentation and microalgae cultivation are also discussed.

Supplementation of recombinant cellulases with LPMOs and CDHs improves consolidated bioprocessing of cellulose

The increased demand for energy has sparked a global search for renewable energy sources that could partly replace fossil fuel resources and help mitigate climate change. Cellulosic biomass is an ideal feedstock for renewable bioethanol production, but the process is not currently economically feasible due to the high cost of pretreatment and enzyme cocktails to release fermentable sugars. Lytic polysaccharide monooxygenases (LPMOs) and cellobiose dehydrogenases (CDHs) are auxiliary enzymes that can enhance cellulose hydrolysis. In this study, four LPMO and two CDH genes were subcloned and expressed in the Saccharomyces cerevisiae Y294 laboratory strain. SDS-PAGE analysis confirmed the extracellular production of the LPMOs and CDHs in the laboratory S. cerevisiae Y294 strain. A rudimentary cellulase cocktail (cellobiohydrolase 1 and 2, endoglucanase and β-glucosidase) was expressed in the commercial CelluX™ 4 strain and extracellular production of the individual cellulases was confirmed by SDS-PAGE analysis. In vitro cooperation of the CDHs and LPMOs with the rudimentary cellulases produced by strain CelluX™ 4[F4-1] was demonstrated on Whatman filter paper. The significant levels of soluble sugars released from this crystalline cellulose substrate indicated that these auxiliary enzymes could be important components of the CBP yeast cellulolytic system.

Biomass Deacetylation at Moderate Solid Loading Improves Sugar Recovery and Succinic Acid Production

Biomass deacetylation with alkali prior to dilute acid pretreatment can be a promising approach to reduce the toxicity of the resulting hydrolysates and improve microbial fermentation. In this study, the effect of mild alkaline treatment of oil palm trunk (OPT) biomass on succinic acid production was evaluated. Deacetylation was carried out under different conditions: NaOH loadings (1–5%, w/v) and reaction times (15–90 min) at 100 °C. Deacetylation using 1% (w/v) NaOH within 15 min was sufficient to achieve a high acetic acid removal of 5.8 g/L with minimal sugar loss. Deacetylation under this condition resulted in a total sugar concentration of 55.8 g/L (18.0 g/L xylose and 37.8 g/L glucose), which was 37% higher than that of non-deacetylated OPT. Subsequently, succinic acid production using Actinobacillus succinogenes was also improved by 42% and 13% in terms of productivity and yield, respectively, at 10% (w/v) solid loading. This further demonstrated that mild alkaline treatment prior to dilute acid pretreatment is a promising strategy to improve succinic acid production. This study provides a facile approach for reducing the most influential inhibitory effect of acetic acid, and it can be applied to the exploitation of lignocellulosic biomass resources for succinic acid, biofuels, and/or other biochemical co-production in the future.

Physiological and transcriptome analyses of Kluyveromyces marxianus reveal adaptive traits in stress response

Kluyveromyces marxianus is a non-conventional yeast with outstanding physiological characteristics and a high potential for lignocellulosic ethanol production. However, achieving high ethanol productivity requires overcoming several biotechnological challenges due to the cellular inhibition caused by the inhibitors present in the medium. In this work, K. marxianus SLP1 was adapted to increase its tolerance to a mix of inhibitory compounds using the adaptive laboratory evolution strategy to study the adaptation and stress response mechanisms used by this non-Saccharomyces yeast. The fermentative and physiological parameters demonstrated that the adapted K. marxianus P8 had a better response against the synergistic effects of multiple inhibitors because it reduced the lag phase from 12 to 4 h, increasing the biomass by 40% and improving the volumetric ethanol productivity 16-fold than the parental K. marxianus SLP1. To reveal the effect of adaptation process in P8, transcriptome analysis was carried out; the result showed that the basal gene expression in P8 changed, suggesting the biological capability of K. marxianus to activate the adaptative prediction mechanism. Similarly, we carried out physiologic and transcriptome analyses to reveal the mechanisms involved in the stress response triggered by furfural, the most potent inhibitor in K. marxianus. Stress response studies demonstrated that P8 had a better physiologic response than SLP1, since key genes related to furfural transformation (ALD4 and ALD6) and stress response (STL1) were upregulated. Our study demonstrates the rapid adaptability of K. marxianus to stressful environments, making this yeast a promising candidate to produce lignocellulosic ethanol. KEY POINTS: • K. marxianus was adapted to increase its tolerance to a mix of inhibitory compounds • The basal gene expression of K. marxianus changed after the adaptation process • Adapted K. marxianus showed a better physiological response to stress by inhibitors • Transcriptome analyses revealed key genes involved in the stress response.

Enhanced production of 3,4-dihydroxybutyrate from xylose by engineered yeast via xylonate re-assimilation under alkaline condition

To realize lignocellulose-based bioeconomy, efficient conversion of xylose into valuable chemicals by microbes is necessary. Xylose oxidative pathways that oxidize xylose into xylonate can be more advantageous than conventional xylose assimilation pathways because of fewer reaction steps without loss of carbon and ATP. Moreover, commodity chemicals like 3,4-dihydroxybutyrate and 3-hydroxybutyrolactone can be produced from the intermediates of xylose oxidative pathway. However, successful implementations of xylose oxidative pathway in yeast have been hindered because of the secretion and accumulation of xylonate which is a key intermediate of the pathway, leading to low yield of target product. Here, high-yield production of 3,4-dihydroxybutyrate from xylose by engineered yeast was achieved through genetic and environmental perturbations. Specifically, 3,4-dihydroxybutyrate biosynthetic pathway was established in yeast through deletion of ADH6 and overexpression of yneI. Also, inspired by the mismatch of pH between host strain and key enzyme of XylD, alkaline fermentations (pH ≥ 7.0) were performed to minimize xylonate accumulation. Under the alkaline conditions, xylonate was re-assimilated by engineered yeast and combined product yields of 3,4-dihydroxybutyrate and 3-hydroxybutyrolactone resulted in 0.791 mol/mol-xylose, which is highest compared with previous study. These results shed light on the utility of the xylose oxidative pathway in yeast.

Integration of Corn and Cane for Ethanol Production: Effects of Lactobacilli Contamination on Fermentative Parameters and Use of Ionizing Radiation Treatment for Disinfection

Recently, in Brazil, corn ethanol industries are being installed and the integration with sugar/energy-cane has been proposed, using bagasse for cogeneration and the juice to dilute the corn. However, this integration may have some limitations, such as the quality of the cane juice and potential contamination by microorganisms brought with the cane from the field. In this article, we first tested the effects of mixing energy cane juice with corn on fermentative parameters. We also assessed the effects of Lactobacilli. contamination on organic acids produced during the fermentation and fermentation parameters and proposed the use of ionizing radiation to replace antibiotics as a disinfection control method. Our results showed that mixing energy cane juice with corn does not have any negative effect on fermentation parameters, including ethanol production. The contamination with Lactobacilli. considerably increased the production of acetic, lactic, and succinic acid, reducing the pH and ethanol content from 89.2 g L−1 in the sterilized treatment to 72.9 g L−1 in the contaminated treatment. Therefore, for the integration between corn and cane to be applied on an industrial scale, it is essential to have effective disinfection before fermentation. Ionizing radiation (20 kGy) virtually disinfected the wort, showing itself to be a promising technology; however, an economic viability study for adopting it in the industry should be carried out.

Multi-feedstock biorefinery concept: Valorization of winery wastes by engineered yeast

The wine industry produces significant amounts of by-products and residues that are not properly managed, posing an environmental problem. Grape must surplus, vine shoots, and wine lees have the potential to be used as renewable resources for the production of energy and chemicals. Metabolic engineering efforts have established Saccharomyces cerevisiae as an efficient microbial cell factory for biorefineries. Current biorefineries designed for producing multiple products often rely on just one feedstock, but the bioeconomy would clearly benefit if these biorefineries could efficiently convert multiple feedstocks. Moreover, to reduce the environmental impact of fossil fuel consumption and maximize production economics, a biorefinery should be capable to supplement the manufacture of biofuel with the production of high-value products. This study proposes an integrated approach for the valorization of diverse wastes resulting from winemaking processes through the biosynthesis of xylitol and ethanol. Using genetically modified S. cerevisiae strains, the xylose-rich hemicellulosic fraction of hydrothermally pretreated vine shoots was converted into xylitol, and the cellulosic fraction was used to produce bioethanol. In addition, grape must, enriched in sugars, was efficiently used as a low-cost source for yeast propagation. The production of xylitol was optimized, in a Simultaneous Saccharification and Fermentation process configuration, by adjusting the inoculum size and enzyme loading. Furthermore, a yeast strain displaying cellulases in the cell surface was applied for the production of bioethanol from the glucan-rich cellulosic. With the addition of grape must and/or wine lees, high ethanol concentrations were reached, which are crucial for the economic feasibility of distillation. This integrated multi-feedstock valorization provides a synergistic alternative for converting a range of winery wastes and by-products into biofuel and an added-value chemical while decreasing waste released to the environment.

Optimization of Pinocembrin Biosynthesis in Saccharomyces cerevisiae

The flavonoid pinocembrin and its derivatives have gained increasing interest for their benefits on human health. While pinocembrin and its derivatives can be produced in engineered Saccharomyces cerevisiae, yields remain low. Here, we describe novel strategies for improved de novo biosynthesis of pinocembrin from glucose based on overcoming existing limitations in S. cerevisiae. First, we identified cinnamic acid as an inhibitor of pinocembrin synthesis. Second, by screening for more efficient enzymes and optimizing the expression of downstream genes, we reduced cinnamic acid accumulation. Third, we addressed other limiting factors by boosting the availability of the precursor malonyl-CoA, while eliminating the undesired byproduct 2',4',6'-trihydroxy dihydrochalcone. After optimizing cultivation conditions, 80 mg/L pinocembrin was obtained in a shake flask, the highest yield reported for S. cerevisiae. Finally, we demonstrated that pinocembrin-producing strains could be further engineered to generate 25 mg/L chrysin, another interesting flavone. The strains generated in this study will facilitate the production of flavonoids through the pinocembrin biosynthetic pathway.

Effect of Saccharomyces cerevisiae and Saccharomyces pastorianus Co-Inoculation on Alcoholic Fermentation Behavior and Aromatic Profile of Sauvignon Blanc Wine

Enhancing the sensory profile of wines by exposing the aromas of the grape variety through the involvement of microorganisms has always been a challenge in winemaking. The aim of our work was to evaluate the impact of different fermentation schemes by using mixed and pure cultures of different Saccharomyces species to Sauvignon blanc wine chemical composition and sensory profile. The Sauvignon blanc must has been inoculated with mixed and pure cultures of S. pastorianus and S. cerevisiae strains. For the mixed fermentation schemes, one strain of S. pastorianus has been inoculated with different proportions of S. cerevisiae (S. pastorianus to S. cerevisiae: 99%–1%, 95%–5%, 90%–10%, 80%–20% and 70%–30% w/w) in co-inoculation with two commercial strains of S. cerevisiae. A total of 13 fermentations trials, three monocultures and 10 mixed cultures were performed in biological triplicate. The fermentation kinetics have been controlled by density measurement and classical oenological analyses were performed based on the International Organisation of Vine and Wine (OIV) analytical methods. The population dynamics were evaluated by the specific interdelta PCR reaction of the Saccharomyces species at the beginning and at the end of the fermentation process. The volatile compounds of the wine aroma, such as the esters, higher alcohols and thiols were analyzed by GC/MS. Sensory assessment by trained panel was carried out for all produced wines. Complete depletion of the sugars was achieved between 10 and 13 days for all the fermentation trials. The population dynamics analysis revealed that the S. cerevisiae strain was the most predominant at the end of the fermentation process in all inoculation ratios that were tested. The wines that were fermented with S. pastorianus, either in pure or mixed cultures, were characterized by significantly lower acetic acid production and higher malic acid degradation when compared to the wines that were fermented only with S. cerevisiae strains. The aroma profile of the produced wines was highly affected by both inoculation ratio and the S. cerevisiae strain that was used. The presence of S. pastorianus strain enhanced the production of the varietal thiols when compared to the samples that were fermented with the S. cerevisiae pure cultures. The mixed inoculation cultures of Saccharomyces species could lead to wines with unique character which can nicely express the varietal character of the grape variety.

Model yeast as a versatile tool to examine the antioxidant and anti-ageing potential of flavonoids, extracted from medicinal plants

The demand for the production of herbal extracts for cosmetics, food, and health supplements, known as plant-based medicine, is rising globally. Incorporating herbal extracts could help to create higher value products due to the functional properties of bioactive compounds. Because the phytochemical composition could vary depending on the processing methods, a simple bioassay of herbal bioactive compounds is an important screening method for the purposes of functional characterization and quality assurance. As a simplified eukaryotic model, yeast serves as a versatile tool to examine functional property of bioactive compounds and to gain better understanding of fundamental cellular processes, because they share similarities with the processes in humans. In fact, aging is a well-conserved phenomenon between yeast and humans, making yeast a powerful genetic tool to examine functional properties of key compounds obtained from plant extracts. This study aimed to apply a well-established model yeast, Saccharomyces cerevisiae, to examine the antioxidant and anti-aging potential of flavonoids, extracted from medicinal plants, and to gain insight into yeast cell adaptation to oxidative stress. Some natural quercetin analogs, including morin, kaempferol, aromadendrin, and steppogenin, protected yeast cells against oxidative stress induced by acetic acid, as shown by decreased cell sensitivity. There was also a reduction in intracellular reactive oxygen species following acetic acid treatment. Using the chronological aging assay, quercetin, morin, and steppogenin could extend the lifespan of wild-type S. cerevisiae by 15%–25%. Consistent with the fact that oxidative stress is a key factor to aging, acetic acid resistance was associated with increased gene expression of TOR1, which encodes a key growth signaling kinase, and MSN2 and MSN4, which encode stress-responsive transcription factors. The addition of the antioxidant morin could counteract this increased expression, suggesting a possible modulatory role in cell signaling and the stress response of yeast. Therefore, yeast represents a versatile model organism and rapid screening tool to discover potentially rejuvenescent molecules with anti-aging and anti-oxidant potential from natural resources and to advance knowledge in the molecular study of stress and aging.

Kluyveromyces marxianus as a microbial cell factory for lignocellulosic biomass valorisation

The non-conventional yeast Kluyveromyces marxianus is widely used for several biotechnological applications, mainly due to its thermotolerance, high growth rate, and ability to metabolise a wide range of sugars. These cell traits are strategic for lignocellulosic biomass valorisation and strain diversity prompts the development of robust chassis, either with improved tolerance to lignocellulosic inhibitors or ethanol. This review summarises bioethanol and value-added chemicals production by K. marxianus from different lignocellulosic biomasses. Moreover, metabolic engineering and process optimization strategies developed to expand K. marxianus potential are also compiled, as well as studies reporting cell mechanisms to cope with lignocellulosic-derived inhibitors. The main lignocellulosic-based products are bioethanol, representing 71% of the reports, and xylitol, representing 17% of the reports. K. marxianus also proved to be a good chassis for lactic acid and volatile compounds production from lignocellulosic biomass, although the literature on this matter is still scarce. The increasing advances in genome editing tools and process optimization strategies will widen the K. marxianus-based portfolio products.

Effects of Inhibitors Generated by Dilute Phosphoric Acid Plus Steam-Exploded Poplar on Saccharomyces cerevisiae Growth

The pretreatment of lignocellulosic biomass is important for efficient bioethanol conversion, but causes undesirable by-products that inhibit microbial growth, conversely affecting the bioconversion efficiency. In this study, the main inhibitors derived from dilute phosphoric acid plus steam-exploded poplar wood were identified as 0.22 g/L furfural, 3.63 g/L acetic acid, 0.08 g/L syringaldehyde, etc., indicating the green nature and low toxicity of the pretreatment process. The effects of the three typical inhibitors (furfural, acetic acid, and syringaldehyde) on Saccharomyces cerevisiae 1517RM growth were analyzed and shown to prolong the lag phase of microbial growth to different degrees. In all the inhibitor groups, the ergosterol secretion was boosted, indicating low cell membrane fluidity and robustness of the strain to an adverse environment. The cell electronegativity and morphology of S. cerevisiae 1517RM also changed under different growth conditions, which was helpful for monitoring the physicochemical properties of cells. Furfural, acetic acid, and syringaldehyde had a synergistic effect on each other, providing an important reference to improving the subsequent ethanol fermentation process.

De Novo Production of Plant 4'-Deoxyflavones Baicalein and Oroxylin A from Ethanol in Crabtree-Negative Yeast

Baicalein and oroxylin A are well-known medicinal 4'-deoxyflavones found mainly in the roots of traditional medicinal plant Scutellaria baicalensis Georgi. However, extraction from plants is time-consuming, environmentally unfriendly, and insufficient. Although microbial synthesis of flavonoids has been extensively reported, synthesis of downstream modified 4'-deoxyflavones has not, and their yields are extremely low. Here, we reassembled the S. baicalensis 4'-deoxyflavone biosynthetic pathway in a Crabtree-negative yeast, Pichia pastoris, with activity analysis and combinatorial expression of eight biosynthetic genes, allowing production of 4'-deoxyflavones like baicalein, oroxylin A, wogonin, norwogonin, 6-methoxywogonin, and the novel 6-methoxynorwogonin. De novo baicalein synthesis was then achieved by complete pathway assembly. Toxic intermediates highly impaired the cell production capacity; hence, we alleviated cinnamic acid growth inhibition by culturing the cells at near-neutral pH and using alcoholic carbon sources. To achieve pathway balance and improve baicalein and oroxylin A synthesis, we further divided the pathway into five modules. A series of ethanol-induced and constitutive transcriptional amplification devices were constructed to adapt to the modules. This fine-tuning pathway control considerably reduced byproduct and intermediate accumulation and achieved high-level de novo baicalein (401.9 mg/L with a total increase of 1182-fold, the highest titer reported) and oroxylin A (339.5 mg/L, for the first time) production from ethanol. This study provides new strategies for the microbial synthesis of 4'-deoxyflavones and other flavonoids.

Effect of Yeast Assimilable Nitrogen Content on Fermentation Kinetics, Wine Chemical Composition and Sensory Character in the Production of Assyrtiko Wines

Two wild-type Saccharomyces cerevisiae yeast strains (Sa and Sb) were tested for white wine production using Assyrtiko grape of Santorini. A third commercial Saccharomyces strain was also studied for comparison reasons. Two concentrations of yeast extract and diammonium phosphate (DAP) were added to the must (150 and 250 mg/L) in order to evaluate the effect of nitrogen content on the final wine quality. Analytical methods (HPLC, GC-MS) and sensory analysis were employed to assess the quality of the wines. Fermentation kinetics were monitored throughout the experiment. By the second day of fermentation, all strains showed an approximate consumption of 70% of amino acids. Differences among strains were observed regarding inorganic nitrogen requirements. Sb strain resulted in higher concentrations of higher alcohols (1.9-fold) and ketones (5.6-fold) and lower concentrations of esters (1.2-fold) compared to the control, while Sa strain resulted in higher content of fatty acids (2.1-fold). Both indigenous strains scored better results in aroma quality, body and acidity compared to control. The overall evaluation of the data highlights the great potential of the indigenous S. cerevisiae strains as fermentation starters providing promising results in the sector of terroir wines.

Evolutionary and reverse engineering to increase Saccharomyces cerevisiae tolerance to acetic acid, acidic pH, and high temperature

Saccharomyces cerevisiae scarcely grows on minimal media with acetic acid, acidic pH, and high temperatures. In this study, the adaptive laboratory evolution (ALE), whole-genome analysis, and reverse engineering approaches were used to generate strains tolerant to these conditions. The thermotolerant strain TTY23 and its parental S288C were evolved through 1 year, in increasing concentrations of acetic acid up to 12 g/L, keeping the pH ≤ 4. Of the 18 isolated strains, 9 from each ancestor, we selected the thermo-acid tolerant TAT12, derived from TTY23, and the acid tolerant AT22, derived from S288C. Both grew in minimal media with 12 g/L of acetic acid, pH 4, and 30 °C, and produced ethanol up to 29.25 ± 6 mmol/g_DCW/h-neither of the ancestors thrived in these conditions. Furthermore, only the TAT12 grew on 2 g/L of acetic acid, pH 3, and 37 °C, and accumulated 16.5 ± 0.5 mmol/g_DCW/h of ethanol. Whole-genome sequencing and transcriptomic analysis of this strain showed changes in the genetic sequence and transcription of key genes involved in the RAS-cAMP-PKA signaling pathway (RAS2, GPA2, and IRA2), the heat shock transcription factor (HSF1), and the positive regulator of replication initiation (SUM1), among others. By reverse engineering, the relevance of the combined mutations in the genes RAS2, HSF1, and SUM1 to the tolerance for acetic acid, low pH, and high temperature was confirmed. Alone, the RAS2 mutation yielded acid tolerance and HSF1 nutation thermotolerance. Increasing the thermo-acidic niche and acetic acid tolerance of S. cerevisiae can contribute to improve economic ethanol production. KEY POINTS: • Thermo-acid tolerant (TAT) yeast strains were generated by adaptive laboratory evolution. • The strain TAT12 thrived on non-native, thermo-acidic harmful conditions. • Mutations in RAS2, HSF1, and SUM1 genes rendered yeast thermo and acid tolerant.

RNA sequencing reveals metabolic and regulatory changes leading to more robust fermentation performance during short-term adaptation of Saccharomyces cerevisiae to lignocellulosic inhibitors

BACKGROUND

The limited tolerance of Saccharomyces cerevisiae to inhibitors is a major challenge in second-generation bioethanol production, and our understanding of the molecular mechanisms providing tolerance to inhibitor-rich lignocellulosic hydrolysates is incomplete. Short-term adaptation of the yeast in the presence of dilute hydrolysate can improve its robustness and productivity during subsequent fermentation.

RESULTS

We utilized RNA sequencing to investigate differential gene expression in the industrial yeast strain CR01 during short-term adaptation, mimicking industrial conditions for cell propagation. In this first transcriptomic study of short-term adaption of S. cerevisiae to lignocellulosic hydrolysate, we found that cultures respond by fine-tuned up- and down-regulation of a subset of general stress response genes. Furthermore, time-resolved RNA sequencing allowed for identification of genes that were differentially expressed at 2 or more sampling points, revealing the importance of oxidative stress response, thiamin and biotin biosynthesis. furan-aldehyde reductases and specific drug:H⁺ antiporters, as well as the down-regulation of certain transporter genes.

CONCLUSIONS

These findings provide a better understanding of the molecular mechanisms governing short-term adaptation of S. cerevisiae to lignocellulosic hydrolysate, and suggest new genetic targets for improving fermentation robustness.

Dynamics and variability in the pleiotropic effects of adaptation in laboratory budding yeast populations

Evolutionary adaptation to a constant environment is driven by the accumulation of mutations which can have a range of unrealized pleiotropic effects in other environments. These pleiotropic consequences of adaptation can influence the emergence of specialists or generalists, and are critical for evolution in temporally or spatially fluctuating environments. While many experiments have examined the pleiotropic effects of adaptation at a snapshot in time, very few have observed the dynamics by which these effects emerge and evolve. Here, we propagated hundreds of diploid and haploid laboratory budding yeast populations in each of three environments, and then assayed their fitness in multiple environments over 1000 generations of evolution. We find that replicate populations evolved in the same condition share common patterns of pleiotropic effects across other environments, which emerge within the first several hundred generations of evolution. However, we also find dynamic and environment-specific variability within these trends: variability in pleiotropic effects tends to increase over time, with the extent of variability depending on the evolution environment. These results suggest shifting and overlapping contributions of chance and contingency to the pleiotropic effects of adaptation, which could influence evolutionary trajectories in complex environments that fluctuate across space and time.

Effect of ammonium acetate on alcohol fermentation in cassava-alcohol fermentation process

The cassava-alcohol fermentation process employing cassava requires nitrogen source to maximize yields by a commercial strain of S. cerevisiae TG1348. In this study, a factorial experimental design was used to assess a suitable nitrogen source for growth and fermentative performance of S. cerevisiae in cassava-ethanol fermentation. The alcohol fermentation time was about 39 h for urea and ammonium acetate, which was 48 h for ammonium chloride and ammonium sulphate. The fermentation time was reduced by 19 % when using urea and ammonium acetate as nitrogen source. Ammonium acetate leaded to the highest alcohol yield, which was 4% higher than for ammonium sulphate. In addition, byproduct formation differed obviously between the nitrogen sources. The glycerol yields were similar for urea, ammonium sulphate and ammonium chloride but were 24 % lower for ammonium acetate. However, glycerol yield for ammonium carbonate was higher than for other nitrogen sources. Clearly, in batch cultures the ammonium acetate not only increased ethanol generation, but also decreased glycerol generation. In order to understand why ammonium acetate promotes alcohol fermentation, acetic acid was added to different nitrogen sources. The weight loss effect of ammonium sulphate adding acetic acid and ammonium acetate as nitrogen source was the same. The fermentation time was shortened by adding acetic acid. And pH was increased by addition of acetic acid when ammonium sulfate and urea were used as nitrogen sources. The results showed that the acetate root plays an important role in ammonium acetate. The results of this study could facilitate the development of new strategies to control fermentation performance.

Development of an Haa1-based biosensor for acetic acid sensing in Saccharomyces cerevisiae

Acetic acid is one of the main inhibitors of lignocellulosic hydrolysates and acetic acid tolerance is crucial for the development of robust cell factories for conversion of biomass. As a precursor of acetyl-coenzyme A, it also plays an important role in central carbon metabolism. Thus, monitoring acetic acid levels is a crucial aspect when cultivating yeast. Transcription factor-based biosensors represent useful tools to follow metabolite concentrations. Here, we present the development of an acetic acid biosensor based on the Saccharomyces cerevisiae transcription factor Haa1 that upon binding to acetic acid relocates to the nucleus. In the biosensor, a synthetic transcription factor consisting of Haa1 and BM3R1 from Bacillus megaterium was used to control expression of a reporter gene under a promoter containing BM3R1 binding sites. The biosensor did not drive expression under a promoter containing Haa1 binding sites and responded to acetic acid over a linear range spanning from 10 to 60 mM. To validate its applicability, the biosensor was integrated into acetic acid-producing strains. A direct correlation between biosensor output and acetic acid production was detected. The developed biosensor enables high-throughput screening of strains producing acetic acid and could also be used to investigate acetic acid-tolerant strain libraries.

The Role of Sch9 and the V-ATPase in the Adaptation Response to Acetic Acid and the Consequences for Growth and Chronological Lifespan

Studies with Saccharomyces cerevisiae indicated that non-physiologically high levels of acetic acid promote cellular acidification, chronological aging, and programmed cell death. In the current study, we compared the cellular lipid composition, acetic acid uptake, intracellular pH, growth, and chronological lifespan of wild-type cells and mutants lacking the protein kinase Sch9 and/or a functional V-ATPase when grown in medium supplemented with different acetic acid concentrations. Our data show that strains lacking the V-ATPase are especially more susceptible to growth arrest in the presence of high acetic acid concentrations, which is due to a slower adaptation to the acid stress. These V-ATPase mutants also displayed changes in lipid homeostasis, including alterations in their membrane lipid composition that influences the acetic acid diffusion rate and changes in sphingolipid metabolism and the sphingolipid rheostat, which is known to regulate stress tolerance and longevity of yeast cells. However, we provide evidence that the supplementation of 20 mM acetic acid has a cytoprotective and presumable hormesis effect that extends the longevity of all strains tested, including the V-ATPase compromised mutants. We also demonstrate that the long-lived sch9Δ strain itself secretes significant amounts of acetic acid during stationary phase, which in addition to its enhanced accumulation of storage lipids may underlie its increased lifespan.

Enhancing yeast growth with carboxylates under multiple nutrient limitations

Yeast cell death is triggered when essential nutrients such as potassium and lipid are limited but ammonium is in excess. When ammonium and glucose were maintained at 100% of the normal concentration while all the other essential nutrients in yeast nitrogen base (YNB) were reduced to 2%, yeast growth was halted by ammonium toxicity. Yeast started to grow again when either ammonium was also reduced to 2% or gluconate was added, but simultaneously adding gluconate as well as reducing all the nutrients except glucose 50-fold revived yeast growth to a greater extent, i.e. a quarter of the normal growth. Gluconate, as well as formate and alginate, stimulated yeast growth by buffering the drop in pH. Yeast cells were seemingly more susceptible to low pH under the nutrient-limited conditions, entering the stationary phase at pH higher than that of the normal condition. Carboxylate salts may prove a cost-efficient replacement for large proportions of the essential nutrients as yeast cells, in the presence of 2 mg ml^-1 gluconate, could still achieve nearly 90% of the normal growth when cultured in only 10% of the normal YNB concentration.

Complete and efficient conversion of plant cell wall hemicellulose into high-value bioproducts by engineered yeast

Plant cell wall hydrolysates contain not only sugars but also substantial amounts of acetate, a fermentation inhibitor that hinders bioconversion of lignocellulose. Despite the toxic and non-consumable nature of acetate during glucose metabolism, we demonstrate that acetate can be rapidly co-consumed with xylose by engineered Saccharomyces cerevisiae. The co-consumption leads to a metabolic re-configuration that boosts the synthesis of acetyl-CoA derived bioproducts, including triacetic acid lactone (TAL) and vitamin A, in engineered strains. Notably, by co-feeding xylose and acetate, an enginered strain produces 23.91 g/L TAL with a productivity of 0.29 g/L/h in bioreactor fermentation. This strain also completely converts a hemicellulose hydrolysate of switchgrass into 3.55 g/L TAL. These findings establish a versatile strategy that not only transforms an inhibitor into a valuable substrate but also expands the capacity of acetyl-CoA supply in S. cerevisiae for efficient bioconversion of cellulosic biomass.

Cellulosic hydrolysates contain substantial amounts of acetate, which is toxic to fermenting microorganisms. Here, the authors engineer Baker’s yeast to co-consume xylose and acetate for triacetic acid lactone production from a hemicellulose hydrolysate of switchgrass.

Recent advances in engineering of microbial cell factories for intelligent pH regulation and tolerance

pH regulation is a serious concern in the industrial fermentation process as pH adjustment heavily utilizes acid/base and pollutes the environment. Under pH-stress conditions, microbial growth and production of valuable target products may be severely affected. Furthermore, some strains generating acidic or alkaline products require self pH regulation and increased tolerance against pH-stress. For pH control, synthetic biology has provided advanced engineering approaches to construct robust and more intelligent microbial strains, exhibiting tolerance to pH-stress to cope with limitations of pH regulation. This study reviewed the current progress of advanced strain evolution strategies to engineer pH-stress tolerant strains via synthetic biology. In addition, a large number of pH-responsive elements, including promoters, riboswitches, and some proteins have been investigated and applied for construction of pH-responsive genetic circuits and intelligent pH-responsive microbial strains.

Acetic acid stress in budding yeast: From molecular mechanisms to applications

 Acetic acid stress represents a frequent challenge to counteract for yeast cells under several environmental conditions and industrial bioprocesses. The molecular mechanisms underlying its response have been mostly elucidated in the budding yeast Saccharomyces cerevisiae, where acetic acid can be either a physiological substrate or a stressor. This review will focus on acetic acid stress and its response in the context of cellular transport, pH homeostasis, metabolism and stress‐signalling pathways. This information has been integrated with the results obtained by multi‐omics, synthetic biology and metabolic engineering approaches aimed to identify major cellular players involved in acetic acid tolerance. In the production of biofuels and renewable chemicals from lignocellulosic biomass, the improvement of acetic acid tolerance is a key factor. In this view, how this knowledge could be used to contribute to the development and competitiveness of yeast cell factories for sustainable applications will be also discussed.

Acetic acid stress is a frequent challenge for budding yeast.

Signalling pathways dissection and system‐wide approaches reveal a complex picture.

Cell fitness and adaptation under acid stress conditions is environment dependent.

Tolerance to acetic acid is a key factor in yeast‐based industrial biotechnology.

There is no ‘magic bullet’: An integrated approach is advantageous to develop performing yeast cell factories.

The metabolism of lipids in yeasts and applications in oenology

Lipids are valuable compounds present in all living organisms, which display an array of functions related to compartmentalization, energy storage and enzyme activation. Furthermore, these compounds are an integral part of the plasma membrane which is responsible for maintaining structure, facilitating the transport of solutes in and out of the cell and cellular signalling necessary for cell survival. The lipid composition of the yeast Saccharomyces cerevisiae has been extensively investigated and the impact of lipids on S. cerevisiae cellular functions during wine alcoholic fermentation is well documented. Although other yeast species are currently used in various industries and are receiving increasing attention in winemaking, little is known about their lipid metabolism. This review article provides an extensive and critical evaluation of our knowledge on the biosynthesis, accumulation, metabolism and regulation of fatty acids and sterols in yeasts. The implications of the yeast lipid content on stress resistance as well as performance during alcoholic fermentation are discussed and a particular emphasis is given on non-Saccharomyces yeasts. Understanding lipid requirements and metabolism in non-Saccharomyces yeasts may lead to a better management of these yeast to enhance their contributions to wine properties.

Impact of Lignocellulose Pretreatment By-Products on S. cerevisiae Strain Ethanol Red Metabolism during Aerobic and An-aerobic Growth

Understanding the specific response of yeast cells to environmental stress factors is the starting point for selecting the conditions of adaptive culture in order to obtain a yeast line with increased resistance to a given stress factor. The aim of the study was to evaluate the specific cellular response of Saccharomyces cerevisiae strain Ethanol Red to stress caused by toxic by-products generated during the pretreatment of lignocellulose, such as levulinic acid, 5-hydroxymethylfurfural, furfural, ferulic acid, syringaldehyde and vanillin. The presence of 5-hydroxymethylfurfural at the highest analyzed concentration (5704.8 ± 249.3 mg/L) under aerobic conditions induced the overproduction of ergosterol and trehalose. On the other hand, under anaerobic conditions (during the alcoholic fermentation), a decrease in the biosynthesis of these environmental stress indicators was observed. The tested yeast strain was able to completely metabolize 5-hydroxymethylfurfural, furfural, syringaldehyde and vanillin, both under aerobic and anaerobic conditions. Yeast cells reacted to the presence of furan aldehydes by overproducing Hsp60 involved in the control of intracellular protein folding. The results may be helpful in optimizing the process parameters of second-generation ethanol production, in order to reduce the formation and toxic effects of fermentation inhibitors.

Subcellular mechanism of microbial inactivation during water disinfection by cold atmospheric-pressure plasma

Although the identification of effective reactive oxygen species (ROS) generated by plasma has been extensively studied, yet the subcellular mechanism of microbial inactivation has never been clearly elucidated in plasma disinfection processes. In this study, subcellular mechanism of yeast cell inactivation during plasma-liquid interaction was revealed in terms of comprehensive factors including cell morphology, membrane permeability, lipid peroxidation, membrane potential, intracellular redox homeostasis (intracellular ROS and H₂O₂, and antioxidant system (SOD, CAT and GSH)), intracellular ionic equilibrium (intracellular H⁺ and K⁺) and energy metabolism (mitochondrial membrane potential, intracellular Ca²⁺ and ATP level). The ROS analysis show that ·OH, ¹O₂, ·O₂^-and H₂O₂ were generated in this plasma-liquid interaction system and ·O₂^-served as the precursor of ¹O₂. Additionally, the solution pH was reduced. Plasma can effectively inactivate yeast cells mainly via apoptosis by damaging cell membrane, intracellular redox and ion homeostasis and energy metabolism as well as causing DNA fragmentation. ROS scavengers (l-His, d-Man and SOD) and pH buffer (phosphate buffer solution, PBS) were employed to investigate the role of five antimicrobial factors (·OH, ¹O₂, ·O₂^-, H₂O₂ and low pH) in plasma sterilization. Results show that they have different influences on the aforementioned cell physiological activities. The ·OH and ¹O₂ contributed most to the yeast inactivation. The ·OH mainly attacked cell membrane and increased cell membrane permeability. The disturb of cell energy metabolism was mainly attributed to ¹O₂. The damage of cell membrane as well as extracellular low pH could break the intracellular ionic equilibrium and further reduce cell membrane potential. The remarkable increase of intracellular H₂O₂ was mainly due to the influx of extracellular H₂O₂ via destroyed cell membrane, which played a little role in yeast inactivation during 10-min plasma treatment. These findings provide comprehensive insights into the antimicrobial mechanism of plasma, which can promote the development of plasma as an alternative water disinfection strategy.

Engineering prokaryotic regulator IrrE to enhance stress tolerance in budding yeast

BACKGROUND

Stress tolerance is one of the important desired microbial traits for industrial bioprocesses, and global regulatory protein engineering is an efficient approach to improve strain tolerance. In our study, IrrE, a global regulatory protein from the prokaryotic organism Deinococcus radiodurans, was engineered to confer yeast improved tolerance to the inhibitors in lignocellulose hydrolysates or high temperatures.

RESULTS

Three IrrE mutations were developed through directed evolution, and the expression of these mutants could improve the yeast fermentation rate by threefold or more in the presence of multiple inhibitors. Subsequently, the tolerance to multiple inhibitors of single-site mutants based on the mutations from the variants were then evaluated, and 11 mutants, including L65P, I103T, E119V, L160F, P162S, M169V, V204A, R244G, Base 824 Deletion, V299A, and A300V were identified to be critical for the improved representative inhibitors, i.e., furfural, acetic acid and phenol (FAP) tolerance. Further studies indicated that IrrE caused genome-wide transcriptional perturbation in yeast, and the mutant I24 led to the rapid growth of Saccharomyces cerevisiae by primarily regulating the transcription level of transcription activators/factors, protecting the intracellular environment and enhancing the antioxidant capacity under inhibitor environments, which reflected IrrE plasticity. Meanwhile, we observed that the expression of the wild-type or mutant IrrE could also protect Saccharomyces cerevisiae from the damage caused by thermal stress. The recombinant yeast strains were able to grow with glucose at 42 ℃.

CONCLUSIONS

IrrE from Deinococcus radiodurans can be engineered as a tolerance-enhancer for Saccharomyces cerevisiae. Systematic research on the regulatory model and mechanism of a prokaryotic global regulatory factor IrrE to increase yeast tolerance provided valuable insights for the improvements in microbial tolerance to complex industrial stress conditions.

Valorizing a hydrothermal liquefaction aqueous phase through co-production of chemicals and lipids using the oleaginous yeast Yarrowia lipolytica

Hydrothermal liquefaction is a promising technology to upgrade wet organic waste into a biocrude oil for diesel or jet fuel; however, this process generates an acid-rich aqueous phase which poses disposal issues. This hydrothermal liquefaction aqueous phase (HTL-AP) contains organic acids, phenol, and other toxins. This work demonstrates that Y. lipolytica as a unique host to valorize HTL-AP into a variety of co-products. Specifically, strains of Y. lipolytica can tolerate HTL-AP at 10% in defined media and 25% in rich media. The addition of HTL-AP enhances production of the polymer precursor itaconic acid by 3-fold and the polyketide triacetic acid lactone at least 2-fold. Additional co-products (lipids and citric acid) were produced in these fermentations. Finally, bioreactor cultivation enabled 21.6 g/L triacetic acid lactone from 20% HTL-AP in mixed sugar hydrolysate. These results demonstrate the first use of Y. lipolytica in HTL-AP valorization toward production of a portfolio of value-added compounds.