Evolution of microbiological analytical methods for dairy industry needs

A longitudinal study on the bacterial quality of baby spinach cultivated in Arizona and California

In the U.S., baby spinach is mostly produced in Arizona (AZ) and California (CA). Characterizing the impact of growing region on the bacterial quality of baby spinach can inform quality management practices in industry. Between December 2021 and December 2022, baby spinach was sampled after harvest and packaging for microbiological testing, including shelf-life testing of packaged samples that were stored at 4°C. Samples were tested to (i) determine bacterial concentration, and (ii) obtain and identify bacterial isolates. Packaged samples from the Salinas, CA, area (n = 13), compared to those from the Yuma, AZ, area (n = 9), had a significantly higher bacterial concentration, on average, by 0.78 log10 CFU/g (P < 0.01, based on aerobic, mesophilic plate count data) or 0.67 log10 CFU/g (P < 0.01, based on psychrotolerant plate count data); the bacterial concentrations of harvest samples from the Yuma and Salinas areas were not significantly different. Our data also support that an increase in preharvest temperature is significantly associated with an increase in the bacterial concentration on harvested and packaged spinach. A Fisher's exact test and linear discriminant analysis (effect size), respectively, demonstrated that (i) the genera of 2,186 bacterial isolates were associated (P < 0.01) with growing region and (ii) Pseudomonas spp. and Exiguobacterium spp. were enriched in spinach from the Yuma and Salinas areas, respectively. Our findings provide preliminary evidence that growing region and preharvest temperature may impact the bacterial quality of spinach and thus could inform more targeted strategies to manage produce quality.

IMPORTANCE

In the U.S., most spinach is produced in Arizona (AZ) and California (CA) seasonally; typically, spinach is cultivated in the Yuma, AZ, area during the winter and in the Salinas, CA, area during the summer. As the bacterial quality of baby spinach can influence consumer acceptance of the product, it is important to assess whether the bacterial quality of baby spinach can vary between spinach-growing regions. The findings of this study provide insights that could be used to support region-specific quality management strategies for baby spinach. Our results also highlight the value of further evaluating the impact of growing region and preharvest temperature on the bacterial quality of different produce commodities.

Combination of the electronic nose with microbiology as a tool for rapid detection of Salmonella

Salmonella is one of the most important foodborne pathogens and its analysis in raw and processed products is mandatory in the food industry. Although microbiological analysis is the standard practice for Salmonella determination, these assays are commonly laborious and time-consuming, thus, alternative techniques based on easy operation, few manipulation steps, low cost, and reduced time are desirable. In this paper, we demonstrate the use of an e-nose based on ionogel composites (ionic liquid + gelatine + Fe3O4 particles) as a complementary tool for the conventional microbiological detection of Salmonella. We used the proposed methodology for differentiating Salmonella from Escherichia coli, Pseudomonas fluorescens, Pseudomonas aeruginosa, and Staphylococcus aureus in nonselective medium: pre-enrichment in brain heart infusion (BHI) (incubation at 35 °C, 24 h) and enrichment in tryptone soy agar (TSA) (incubation at 35 °C, 24 h), whereas Salmonella differentiation from E. coli and P. fluorescens was also evaluated in selective media, bismuth sulfite agar (BSA), xylose lysine deoxycholate agar (XLD), and brilliant green agar (BGA) (incubation at 35 °C, 24 h). The obtained data were compared by principal component analysis (PCA) and different machine learning algorithms: multilayer perceptron (MLP), linear discriminant analysis (LDA), instance-based (IBk), and Logistic Model Trees (LMT). For the nonselective media, under optimized conditions, taking merged data of BHI + TSA (total incubation time of 48 h), an accuracy of 85% was obtained with MLP, LDA, and LMT, while five separated clusters were presented in PCA, each cluster corresponding to a bacterium. In addition, for evaluation of the e-nose for discrimination of Salmonella using selective media, considering the combination of BSA + XLD and total incubation of 72 h, the PCA showed three separated and well-defined clusters corresponding to Salmonella, E. coli, and P. fluorescens, and an accuracy of 100% was obtained for all classifiers.

Commercial probiotic products in public health: current status and potential limitations

Consumption of commercial probiotics for health improvement and disease treatment has increased in popularity among the public in recent years. The local shops and pharmacies are brimming with various probiotic products such as probiotic food, dietary supplement and pharmaceuticals that herald a range of health benefits, from nutraceutical benefits to pharmaceutical effects. However, although the probiotic market is expanding rapidly, there is increasing evidence challenging it. Emerging insights from microbiome research and public health demonstrate several potential limitations of the natural properties, regulatory frameworks, and market consequences of commercial probiotics. In this review, we highlight the potential safety and performance issues of the natural properties of commercial probiotics, from the genetic level to trait characteristics and probiotic properties and further to the probiotic-host interaction. Besides, the diverse regulatory frameworks and confusing probiotic guidelines worldwide have led to product consequences such as pathogenic contamination, overstated claims, inaccurate labeling and counterfeit trademarks for probiotic products. Here, we propose a plethora of available methods and strategies related to strain selection and modification, safety and efficacy assessment, and some recommendations for regulatory agencies to address these limitations to guarantee sustainability and progress in the probiotic industry and improve long-term public health and development.

An Integrated Analytical Approach for the Characterization of Probiotic Strains in Food Supplements

Research surrounding health benefits from probiotics is becoming popular because of the increasing demand for safer products with protective and therapeutic effects. Proven benefits are species- or genus-specific; however, no certified assays are available for their characterization and quantification at the strain level in the food supplement industry. The objective of this study was to develop a strain-specific Real-time quantitative polymerase chain reaction (RT-qPCR)-based method to be implemented in routine tests for the identification and quantification of Bifidobacterium longum, Bifidobacterium animalis spp. lactis, Lactobacillus paracasei, Lactobacillus rhamnosus, Lactobacillus casei, Bifidobacterium breve, Lactobacillus acidophilus, Lactobacillus plantarum, and Lactobacillus helveticus, starting from a powder mixture of food supplements. The method optimization was carried out in combination with flow cytometry to compare results between the two strategies and implement the analytical workflow with the information also regarding cell viability. These assays were validated in accordance with the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) criteria using the plate count enumeration as the gold standard reference. Briefly, probiotic DNAs were extracted from two powder food supplements. Strain-specific primers targeting unique sequence regions of 16S RNA were identified and amplified by RT-qPCR. Primers were tested for specificity, sensitivity, and efficiency. Both RT-qPCR and flow-cytometry methods described in our work for the quantification and identification of Lactobacillus and Bifidobacterium strains were specific, sensitive, and precise, showing better performances with respect to the morphological colony identification. This work demonstrated that RT-qPCR can be implemented in the quality control workflow of commercial probiotic products giving more standardized and effective results regarding species discrimination.

Emerging Bioanalytical Devices and Platforms for Rapid Detection of Pathogens in Environmental Samples

The development of robust bioanalytical devices and biosensors for infectious pathogens is progressing well with the advent of new materials, concepts, and technology. The progress is also stepping towards developing high throughput screening technologies that can quickly identify, differentiate, and determine the concentration of harmful pathogens, facilitating the decision-making process for their elimination and therapeutic interventions in large-scale operations. Recently, much effort has been focused on upgrading these analytical devices to an intelligent technological platform by integrating them with modern communication systems, such as the internet of things (IoT) and machine learning (ML), to expand their application horizon. This review outlines the recent development and applications of bioanalytical devices and biosensors to detect pathogenic microbes in environmental samples. First, the nature of the recent outbreaks of pathogenic microbes such as foodborne, waterborne, and airborne pathogens and microbial toxins are discussed to understand the severity of the problems. Next, the discussion focuses on the detection systems chronologically, starting with the conventional methods, advanced techniques, and emerging technologies, such as biosensors and other portable devices and detection platforms for pathogens. Finally, the progress on multiplex assays, wearable devices, and integration of smartphone technologies to facilitate pathogen detection systems for wider applications are highlighted.

Microfluidic One-Pot Digital Droplet FISH Using LNA/DNA Molecular Beacons for Bacteria Detection and Absolute Quantification

We demonstrate detection and quantification of bacterial load with a novel microfluidic one-pot wash-free fluorescence in situ hybridization (FISH) assay in droplets. The method offers minimal manual workload by only requiring mixing of the sample with reagents and loading it into a microfluidic cartridge. By centrifugal microfluidic step emulsification, our method partitioned the sample into 210 pL (73 µm in diameter) droplets for bacterial encapsulation followed by in situ permeabilization, hybridization, and signal detection. Employing locked nucleic acid (LNA)/DNA molecular beacons (LNA/DNA MBs) and NaCl-urea based hybridization buffer, the assay was characterized with Escherichia coli, Klebsiella pneumonia, and Proteus mirabilis. The assay performed with single-cell sensitivity, a 4-log dynamic range from a lower limit of quantification (LLOQ) at ~3 × 10³ bacteria/mL to an upper limit of quantification (ULOQ) at ~3 × 10⁷ bacteria/mL, anda linearity R² = 0.976. The total time-to-results for detection and quantification was around 1.5 hours.

Detection of Potential Microbial Contaminants and Their Toxins in Fermented Dairy Products: a Comprehensive Review

Fermented dairy products are dominant constituents of daily diets around the world due to their desired organoleptic properties, long shelf life, and high nutritional value. Probiotics are often incorporated into these products for their health and technological benefits. However, the safety and possible contamination of fermented dairy products during the manufacturing process could have significant deleterious health and economic impacts. Pathogenic microorganisms and toxins from different sources in fermented dairy products contribute to outbreaks and toxicity cases. Although the health and nutritional benefits of fermented dairy products have been extensively investigated, safety hazards due to contamination are relatively less explored. As a preventive measure, it is crucial to accurately identify and determine the associated microbiota or their toxins. It is noteworthy to highlight the importance of detecting not only the pathogenic microbiota but also their toxic metabolites so that putative outbreaks can thereby be prevented or detected even before they cause harmful effects to human health. In this context, this review focuses on describing techniques designed to detect potential contaminants; also, the advantages and disadvantages of these techniques were summarized. Moreover, this review compiles the most recent and efficient analytical methods for detecting microbial hazards and toxins in different fermented dairy products of different origins. Causative agents behind contamination incidences are also discussed briefly to aid in future prevention measures, as well as detection approaches and technologies employed. Such approach enables the elucidation of the best strategies to control contamination in fermented dairy product manufacturing processes.

Molecular Methods for Pathogenic Bacteria Detection and Recent Advances in Wastewater Analysis

With increasing concerns about public health and the development of molecular techniques, new detection tools and the combination of existing approaches have increased the abilities of pathogenic bacteria monitoring by exploring new biomarkers, increasing the sensitivity and accuracy of detection, quantification, and analyzing various genes such as functional genes and antimicrobial resistance genes (ARG). Molecular methods are gradually emerging as the most popular detection approach for pathogens, in addition to the conventional culture-based plate enumeration methods. The analysis of pathogens in wastewater and the back-estimation of infections in the community, also known as wastewater-based epidemiology (WBE), is an emerging methodology and has a great potential to supplement current surveillance systems for the monitoring of infectious diseases and the early warning of outbreaks. However, as a complex matrix, wastewater largely challenges the analytical performance of molecular methods. This review synthesized the literature of typical pathogenic bacteria in wastewater, types of biomarkers, molecular methods for bacterial analysis, and their recent advances in wastewater analysis. The advantages and limitation of these molecular methods were evaluated, and their prospects in WBE were discussed to provide insight for future development.

Next-Generation Food Research: Use of Meta-Omic Approaches for Characterizing Microbial Communities Along the Food Chain

Microorganisms exist along the food chain and impact the quality and safety of foods in both positive and negative ways. Identifying and understanding the behavior of these microbial communities enable the implementation of preventative or corrective measures in public health and food industry settings. Current culture-dependent microbial analyses are time-consuming and target only specific subsets of microbes. However, the greater use of culture-independent meta-omic approaches has the potential to facilitate a thorough characterization of the microbial communities along the food chain. Indeed, these methods have shown potential in contributing to outbreak investigation, ensuring food authenticity, assessing the spread of antimicrobial resistance, tracking microbial dynamics during fermentation and processing, and uncovering the factors along the food chain that impact food quality and safety. This review examines the community-based approaches, and particularly the application of sequencing-based meta-omics strategies, for characterizing microbial communities along the food chain. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Propionic acid bacteria in the food industry: An update on essential traits and detection methods

Propionic acid bacteria (PAB) is an umbrella term for a group of bacteria with the ability to produce propionic acid. In the past, due to this common feature and other phenotypic similarities, genetically heterogeneous bacteria were considered as a single genus, Propionibacterium. Members of this genus ranged from "dairy propionibacteria," which are widely known for their role in eye and flavor formation in cheese production, to "cutaneous propionibacteria," which are primarily associated with human skin. In 2016, the introduction of two new genera based on genotypic data facilitated a clear separation of cutaneous (Cutibacterium spp.) from dairy PAB (Propionibacterium spp., Acidipropionibacterium spp.). In light of these taxonomic changes, but with particular emphasis on dairy PAB, this review describes the current state of knowledge about metabolic pathways and other characteristics such as antibiotic resistance and virulence factors. In addition, the relevance of dairy PAB for the food industry and cheese production in particular is highlighted. Furthermore, methods for cultivation, detection, and enumeration are reviewed, incorporating the current taxonomy as well as the potential for routine applications.

Shaping the Future of Probiotics and Prebiotics

Recent and ongoing developments in microbiome science are enabling new frontiers of research for probiotics and prebiotics. Novel types, mechanisms, and applications currently under study have the potential to change scientific understanding as well as nutritional and healthcare applications of these interventions. The expansion of related fields of microbiome-targeted interventions, and an evolving landscape for implementation across regulatory, policy, prescriber, and consumer spheres, portends an era of significant change. In this review we examine recent, emerging, and anticipated trends in probiotic and prebiotic science, and create a vision for broad areas of developing influence in the field.

Metataxonomic and metagenomic approaches for the study of undefined strain starters for cheese manufacture

Undefined strain starters are used for the production of many traditional and artisanal cheeses. Composition of undefined starters depends on several factors, and the diversity in strains and species significantly affects cheese quality and features. Culture-dependent approaches have long been used for the microbial profiling and functionalities of undefined cultures but underestimate their diversity due to culturability biases. Recently, culture-independent methods, based on high-throughput sequencing (HTS), have been preferred, with a significant boost in resolution power and sensitivity level. Amplicon targeted (AT) metagenomics, based on 16S rRNA sequencing, returned a larger microbiota diversity at genus and, sometimes, at species levels for artisanal starters of several PDO cheeses, but was inappropriate for populations with high strain diversity, and other gene targets were tested in AT approaches. Shotgun metagenomics (total DNA) and metatranscriptomics (total RNA), although are more powerful in depicting diversity and functionality of undefined cultures, have been rarely applied because of some limitations (e.g., high costs and laboriousness, need for bioinformatics skills). The advantages of HTS technologies are undoubted, but some hurdles need to be still overcame (e.g., resolution power, discrepancy between active and inactive cells, robust analytic pipelines, cost and time reduction for integrated approaches) so that HTS become routinary and convenient for defining complexity, microbial interactions (including host-phage relationships) and evolution in cheeses of undefined starters.

Gaps in the assortment of rapid assays for microorganisms of interest to the dairy industry

This review presents the results of a study into the offering of rapid microbial detection assays to the Irish dairy industry. At the outset, a consultation process was undertaken whereby key stakeholders were asked to compile a list of the key microorganisms of interest to the sector. The resultant list comprises 19 organisms/groups of organisms divided into five categories: single pathogenic species (Cronobacter sakazakii, Escherichia coli and Listeria monocytogenes); genera containing pathogenic species (Bacillus, Clostridium, Listeria, Salmonella; Staphylococcus); broad taxonomic groupings (Coliforms, Enterobacteriaceae, fecal Streptococci, sulfite reducing bacteria/sulfite reducing Clostridia [SRBs/SRCs], yeasts and molds); organisms displaying certain growth preferences or resistance as regards temperature (endospores, psychrotrophs, thermodurics, thermophiles); indicators of quality (total plate count, Pseudomonas spp.). A survey of the rapid assays commercially available for the 19 organisms/groups of organisms was conducted. A wide disparity between the number of rapid tests available was found. Four categories were used to summarize the availability of rapid assays per organism/group of organisms: high coverage (>15 assays available); medium coverage (5-15 assays available); low coverage (<5 assays available); no coverage (0 assays available). Generally, species or genera containing pathogens, whose presence is regulated-for, tend to have a good selection of commercially available rapid assays for their detection, whereas groups composed of heterogenous or even undefined genera of mainly spoilage organisms tend to be "low coverage" or "no coverage." Organisms/groups of organisms with "low coverage" by rapid assays include: Clostridium spp.; fecal Streptococci; and Pseudomonas spp. Those with "no coverage" by rapid assays include: endospores; psychrotrophs; SRB/SRCs; thermodurics; and thermophiles. An important question is: why have manufacturers of rapid microbiological assays failed to respond to the necessity for rapid methods for these organisms/groups of organisms? The review offers explanations, ranging from the technical difficulty involved in detecting as broad a group as the thermodurics, which covers the spores of multiple sporeforming genera as well at least six genera of mesophilic nonsporeformers, to the taxonomically controversial issue as to what constitutes a fecal Streptococcus or SRBs/SRCs. We review two problematic areas for assay developers: validation/certification and the nature of dairy food matrices. Development and implementation of rapid alternative test methods for the dairy industry is influenced by regulations relating to both the microbiological quality standards and the criteria alternative methods must meet to qualify as acceptable test methods. However, the gap between the certification of developer's test systems as valid alternative methods in only a handful of representative matrices, and the requirement of dairy industries to verify the performance of alternative test systems in an extensive and diverse range of dairy matrices needs to be bridged before alternative methods can be widely accepted and adopted in the dairy industry. This study concludes that many important dairy matrices have effectively been ignored by assay developers.

Criteria to Qualify Microorganisms as "Probiotic" in Foods and Dietary Supplements

Still relevant after 19 years, the FAO/WHO definition of probiotics can be translated into four simple and pragmatic criteria allowing one to conclude if specific strains of microorganisms qualify as a probiotic for use in foods and dietary supplements. Probiotic strains must be (i) sufficiently characterized; (ii) safe for the intended use; (iii) supported by at least one positive human clinical trial conducted according to generally accepted scientific standards or as per recommendations and provisions of local/national authorities when applicable; and (iv) alive in the product at an efficacious dose throughout shelf life. We provide clarity and detail how each of these four criteria can be assessed. The wide adoption of these criteria is necessary to ensure the proper use of the word probiotic in scientific publications, on product labels, and in communications with regulators and the general public.

A novel pharmaceutical approach for the analytical validation of probiotic bacterial count by flow cytometry

INTRODUCTION

Flow cytometry is a powerful and sensitive technique able to characterize single cells within a heterogeneous population. Different fluorescent dyes can be combined and used together to analyze a great variety of parameters simultaneously. In particular, flow-cytometry allows to measure viability and vitality of probiotics measuring their metabolic activity, fermentation capacity, acidification potential or oxygen uptake ability (Hayouni et al., 2008). To now, plate counting is considered the gold standard in microbiological technique for probiotic enumeration. However, this approach is limited to the detection of only those viable cells which are able to proliferate and form colonies on a solid medium but is not able to recognize not cultivable bacteria and nonviable cells.

AIM

The aim of the present study was to apply The International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) parameters for the validation of new analytical methods in microbiology. ICH requirements, which are commonly employed for the analysis of drugs and chemical analytes, have been here applied to live cells for the comparison between a flow-cytometric assay and the traditional plate count method for the quantification of viable probiotics bacteria.

METHODS AND RESULTS

Combining specific viability dyes such as thiazole orange (TO) and propidium iodide (PI), probiotic counts of Lactobacillus and Bifidobacterium species were carried out using a FACS Verse (BD Biosciences) cytometer. Analyses were conducted in parallel with the traditional plate count, on specific media. Raw data were analyzed using the FACSuite software (BD Biosciences) and then elaborated with the statistical software Neolicy (VWR International). Results indicated that flow cytometry provides very similar results in cell counting if compared to classical microbiology approaches, showing better performances (ICH parameters) than the traditional plate count method.

CONCLUSIONS

This work demonstrated the analytical ICH validation of probiotic counts in food supplement products using a robust flow cytometric approach able to enumerate and to assess bacteria viability with stronger results in comparison to the traditional plate count.

An important step forward for the future development of an easy and fast procedure for identifying the most dangerous wine spoilage yeast, Dekkera bruxellensis, in wine environment

Dekkera bruxellensis is the main reason for spoilage in the wine industry. It renders the products unacceptable leading to large economic losses. Fluorescence In Situ Hybridization (FISH) technique has the potential for allowing its specific detection. Nevertheless, some experimental difficulties can be encountered when FISH technique is applied in the wine environment (e.g. matrix and cells' autofluorescence, fluorophore inadequate selection and probes' low specificity to the target organisms). An easy and fast in-suspension RNA-FISH procedure was applied for the first time for identifying D. bruxellensis in wine. A previously designed RNA-FISH probe to detect D. bruxellensis (26S D. brux.5.1) was used, and the matrix and cells' fluorescence interferences, the influence of three fluorophores in FISH performance and the probe specificity were evaluated. The results revealed that to apply RNA-FISH technique in the wine environment, a red-emitting fluorophore should be used. Good probe performance and specificity were achieved with 25% of formamide. The resulting RNA-FISH protocol was applied in wine samples artificially inoculated with D. bruxellensis. This spoilage microorganism was detected in wine at cell densities lower than those associated with phenolic off-flavours. Thus, the RNA-FISH procedure described in this work represents an advancement to facilitate early detection of the most dangerous wine spoilage yeast and, consequently, to reduce the economic losses caused by this yeast to the wine industry.

Early detection of E. coli and total coliform using an automated, colorimetric and fluorometric fiber optics-based device

Lack of access to clean water is a major global issue that affects millions of people worldwide. Drinking contaminated water can be extremely hazardous, so it is imperative that it is tested sufficiently. One method commonly used to determine the quality of water is testing for both E. coli and total coliform. Here, we present a cost-effective and automated device which can concurrently test drinking water samples for both E. coli and total coliform using an EPA-approved reagent. Equipped with a Raspberry Pi microcontroller and camera, we perform automated periodic measurements of both the absorption and fluorescence of the water under test over 24 hours. In each test, 100 mL of the water sample is split into a custom designed 40-well plate, where the transmitted blue light and the fluorescent light (under UV excitation) are collected by 520 individual optical fibers. Images of these fiber outputs are then acquired periodically, and digitally processed to determine the presence of the bacteria in each well of the 40-well plate. We demonstrate that this cost-effective device, weighing 1.66 kg, can automatically detect the presence of both E. coli and total coliform in drinking water within ∼16 hours, down to a level of one colony-forming unit (CFU) per 100 mL. Furthermore, due to its automated analysis, this approach is also more sensitive than a manual count performed by an expert, reducing the time needed to determine whether the water under test is safe to drink or not.

Improving End-User Trust in the Quality of Commercial Probiotic Products

In a rapidly growing global probiotic market, end-users have difficulty distinguishing between high quality and poor quality products. This ambiguity threatens the trust consumers and healthcare providers have in probiotic products. To address this problem, we recommend that companies undergo third-party evaluations to certify probiotic quality and label accuracy. In order to communicate about product quality to end-users, indication of certification on product labels is helpful, although not all manufacturers choose to use this approach. Herein we discuss: third-party certification, the process of setting standards for identity, purity, and quantification of probiotics; some emerging methodologies useful for quality assessment; and some technical challenges unique to managing quality of live microbial products. This review provides insights of an Expert Panel engaged in this process and aims to update the reader on relevant current scientific methodologies. Establishing validated methodologies for all aspects of quality assessment is an essential component of this process and can be facilitated by established organizations, such as United States Pharmacopeia. Emerging methodologies including whole genome sequencing and flow cytometry are poised to play important roles in these processes.

Electrooptical Determination of Polarizability for On-Line Viability and Vitality Quantification of Lactobacillus plantarum Cultures

The rapid assessment of cell viability is crucial for process optimization, e.g., during media selection, determination of optimal environmental growth conditions and for quality control. In the present study, the cells' electric anisotropy of polarizability (AP) as well as the mean cell length in Lactobacillus plantarum batch and fed-batch fermentations were monitored with electrooptical measurements coupled to fully automated sample preparation. It was examined, whether this measurement can be related to the cells' metabolic activity, and thus represents a suitable process analytical technology. It is demonstrated that the AP is an early indicator to distinguish between suitable and unsuitable growth conditions in case of a poor energy regeneration or cell membrane defects in L. plantarum batch and fed-batch cultivations. It was shown that the applied method allowed the monitoring of physiological and morphological changes of cells in various growth phases in response to a low pH-value, substrate concentration changes, temperature alterations, exposure to air and nutrient limitation. An optimal range for growth in batch mode was achieved, if the AP remained above 25·10⁻²⁸ F·m² and the mean cell length at ~2.5 μm. It was further investigated, in which way the AP develops after freeze-drying of samples, which were taken in different cultivation phases. It was found that the AP increased most rapidly in resuspended samples from the retardation and late stationary phases, while samples from the early stationary phase recovered slowly. Electrooptical measurements provide valuable information about the physiologic and morphologic state of L. plantarum cells, e.g., when applied as starter cultures or as probiotic compounds.

Water Quality and Total Microbial Load: A Double-Threshold Identification Procedure Intended for Space Applications

During longer-lasting future space missions, water renewal by ground-loaded supplies will become increasingly expensive and unmanageable for months. Space exploration by self-sufficient spacecrafts is thus demanding the development of culture-independent microbiological methods for in-flight water monitoring to counteract possible contamination risks. In this study, we aimed at evaluating total microbial load data assessed by selected early-warning techniques with current or promising perspectives for space applications (i.e., HPC, ATP-metry, qPCR, flow cytometry), through the analysis of water sources with constitutively different contamination levels (i.e., chlorinated and unchlorinated tap waters, groundwaters, river waters, wastewaters). Using a data-driven double-threshold identification procedure, we presented new reference values of water quality based on the assessment of the total microbial load. Our approach is suitable to provide an immediate alert of microbial load peaks, thus enhancing the crew responsiveness in case of unexpected events due to water contamination and treatment failure. Finally, the backbone dataset could help in managing water quality and monitoring issues for both space and Earth-based applications.

Simple and Precise Counting of Viable Bacteria by Resazurin-Amplified Picoarray Detection

Simple, fast, and precise counting of viable bacteria is fundamental to a variety of microbiological applications such as food quality monitoring and clinical diagnosis. To this end, agar plating, microscopy, and emerging microfluidic devices for single bacteria detection have provided useful means for counting viable bacteria, but they also have their limitations ranging from complexity, time, and inaccuracy. We present herein our new method RAPiD (Resazurin-Amplified Picoarray Detection) for addressing this important problem. In RAPiD, we employ vacuum-assisted sample loading and oil-driven sample digitization to stochastically confine single bacteria in Picoarray, a microfluidic device with picoliter-sized isolation chambers (picochambers), in <30 s with only a few minutes of hands-on time. We add AlamarBlue, a resazurin-based fluorescent dye for bacterial growth, in our assay to accelerate the detection of "microcolonies" proliferated from single bacteria within picochambers. Detecting fluorescence in picochambers as an amplified surrogate for bacterial cells allows us to count hundreds of microcolonies with a single image taken via wide-field fluorescence microscopy. We have also expanded our method to practically test multiple titrations from a single bacterial sample in parallel. Using this expanded "multi-RAPiD" strategy, we can quantify viable cells in E. coli and S. aureus samples with precision in ∼3 h, illustrating RAPiD as a promising new method for counting viable bacteria for microbiological applications.

Flow cytometry: a versatile technology for specific quantification and viability assessment of micro-organisms in multistrain probiotic products

AIMS

Classical microbiology techniques are the gold standard for probiotic enumeration. However, these techniques are limited by parameters of time, specificity and incapacity to detect viable but nonculturable (VBNC) micro-organisms and nonviable cells. The aim of the study was to evaluate flow cytometry as a novel method for the specific quantification of viable and nonviable probiotics in multistrain products.

METHODS AND RESULTS

Custom polyclonal antibodies were produced against five probiotic strains from different species (Bifidobacterium bifidum R0071, Bifidobacterium longum ssp. infantis R0033, Bifidobacterium longum ssp. longum R0175, Lactobacillus helveticus R0052 and Lactobacillus rhamnosus R0011). Evaluation of specificity confirmed that all antibodies were specific at least at the subspecies level. A flow cytometry method combining specific antibodies and viability assessment with SYTO^® 24 and propidium iodide was applied to quantify these strains in three commercial products. Analyses were conducted on two flow cytometry instruments by two operators and compared with classical microbiology using selective media. Results indicated that flow cytometry provides higher cell counts than classical microbiology (P < 0·05) in 73% of cases highlighting the possible presence of VBNC. Equivalent performances (repeatability and reproducibility) were obtained for both methods.

CONCLUSIONS

This study showed that flow cytometry methods can be applied to probiotic enumeration and viability assessment. Combination with polyclonal antibodies can achieve sufficient specificity to differentiate closely related strains.

SIGNIFICANCE AND IMPACT OF THE STUDY

Flow cytometry provides absolute and specific quantification of viable and nonviable probiotic strains in a very short time (<2 h) compared with classical techniques (>48 h), bringing efficient tools for research and development and quality control.

Structure of association networks in food bacterial communities

The structure of microbial association networks was investigated for seventeen studies on food bacterial communities using the CoNet app. The results were compared with those for host and environmental microbiomes. Microbial association networks of food bacterial communities shared several properties with those of host microbiomes, although they were less complex and lacked a scale-free, small world structure that is characteristic of environmental microbial communities. This may depend on both the initial contamination pattern, whose main source is the raw material microbiome, and on the copiotrophic nature of food environments, with lack of well defined, specific niches. The selective factors which are characteristic of fermentation and spoilage drastically simplified microbial association networks and showed the emergence of negative hubs. Co-presence and mutual exclusion networks had a radically different structure, with high clustering coefficient in the first and high heterogeneity in the latter. Node properties (degree, positive degree, betweenness centrality, abundance) can be combined in plots, which allow a rapid identification of hub species. The combined use of three network inference tools (CoNet, SparCC, and SPIEC-EASI) confirmed that microbial association network detection is method specific, but several coherent copresence or mutual exclusion relationships were detected by at least two different methods.

Commercial Probiotic Products: A Call for Improved Quality Control. A Position Paper by the ESPGHAN Working Group for Probiotics and Prebiotics

Probiotics have been proposed for a number of indications ranging from the hypothetical long-term immunomodulatory effects to proven benefits in the management of different clinical conditions.An increasing number of commercial products containing probiotics are available. In those products, irrespective if it is food, food supplement, medical food, or drug, the probiotic microorganisms have to be present in a sufficient number by the end of the shelf-life, to pass through the gastrointestinal tract resisting acid and bile, to colonize the gut, and to retain functional properties required to obtain the suggested beneficial effect. Finally, it should be contamination-free.Studies organized worldwide and summarized in this article have shown that inconsistencies and deviations from the information provided on the product label are surprisingly common. Frequently strains are misidentified and misclassified, products are occasionally contaminated, sometimes with even facultative or obligatory pathogens, strains are not viable, the labeled number of colonies cannot be verified, or the functional properties are diminished to the extent that preclude the proposed health benefit. As the probiotic preparations are commonly used for a wide range of conditions, the aim of the Working Group was to summarize results of the studies looking into the quality of the probiotic products and to raise the awareness of the important issue of their quality control.Based on the results obtained, we strongly suggest a more stringent quality control process. This process should ensure that the probiotic content as mentioned on the label meets the actual content throughout the shelf life of the product, while no contamination is present.

Recent developments in detection and enumeration of waterborne bacteria: a retrospective minireview

Waterborne diseases have emerged as global health problems and their rapid and sensitive detection in environmental water samples is of great importance. Bacterial identification and enumeration in water samples is significant as it helps to maintain safe drinking water for public consumption. Culture‐based methods are laborious, time‐consuming, and yield false‐positive results, whereas viable but nonculturable (VBNCs) microorganisms cannot be recovered. Hence, numerous methods have been developed for rapid detection and quantification of waterborne pathogenic bacteria in water. These rapid methods can be classified into nucleic acid‐based, immunology‐based, and biosensor‐based detection methods. This review summarizes the principle and current state of rapid methods for the monitoring and detection of waterborne bacterial pathogens. Rapid methods outlined are polymerase chain reaction (PCR), digital droplet PCR, real‐time PCR, multiplex PCR, DNA microarray, Next‐generation sequencing (pyrosequencing, Illumina technology and genomics), and fluorescence in situ hybridization that are categorized as nucleic acid‐based methods. Enzyme‐linked immunosorbent assay (ELISA) and immunofluorescence are classified into immunology‐based methods. Optical, electrochemical, and mass‐based biosensors are grouped into biosensor‐based methods. Overall, these methods are sensitive, specific, time‐effective, and important in prevention and diagnosis of waterborne bacterial diseases.

Labeling quality and molecular characterization studies of products containing Lactobacillus spp. strains

The objective of the study was to characterize at species level by phenotypic and different molecular methods the strains of Lactobacillus spp. used as constituents of five oral and four vaginal products. Susceptibilities to representative antibiotics were evaluated. In addition, total viable counts at mid and 3 months to deadline of shelf life, in the different formulations and the presence of eventual contaminant microorganisms were investigated.In all oral products the molecular characterization at species level of the strains of Lactobacillus spp. confirmed the strains stated on the label, except for one strain cited on the label as Lactobacillus casei, that our study characterized as Lactobacillus paracasei. In oral products total viable cell content complied with content claimed on the label. In three out four vaginal products (one product claimed "bacillo di Döderlein"), molecular characterization complied with the bacterial name stated on the label. Two vaginal products reported viable counts on the label that were confirmed by our study. The other vaginal products, which did not report bacterial counts on the label, showed a similar decrease of viable counts at different dates to deadline compared to the others. From all the tested products, contaminant microorganisms and acquired resistance to representative antibiotics by the probiotic strains were not detected.

Detection of Food Hazards in Foods: Comparison of Real Time Polymerase Chain Reaction and Cultural Methods

Foodstuffs should not contain microorganisms or their toxins or metabolites in quantities suggesting an unacceptable risk for human health. The detection of food hazards in foods is performed by several tests that produce results dependent on the analytical method used: an analytical reference method, defined as standard, is associated with each microbiological criterion laid down in Regulation 2073/2005/EC, but, analytical methods other than the reference ones, in particular more rapid methods, could be used. Combined screening methods performed by real time-polymerase chain reaction (RT-PCR) are currently validated as alternative methods according to the ISO 16140:2003 and certified by the Association Française de Normalisation. However, the positive results obtained with these alternative methods, the investigated molecular relations that resulted positive have to be confirmed with cultural methods using the same enrichment media in which the molecular screening was performed. Since it is necessary to assess if these testing schemes provide equivalent guarantees of food safety, the aim of this retrospective study is to analyse the data collected, from 2012 to 2014 by Emilia Romagna Region in the field of Piano Regionale Alimenti (Food Regional Plan) during official controls monitoring food samples of animal and other than animal origin. Records performed by combined methods of molecular screening of Salmonella spp., Listeria monocytogenes and thermophilic Campylobacter and cultural confirmation results were gathered together and the results were compared in order to assess the sensitivity of the methods. A total of 10,604 food samples were considered in this study: the comparison of the data revealed that the RT-PCR method detected Salmonella, L. monocytogenes, and thermophilic Campylobacter in 2.18, 3.85 and 3.73% of the samples, respectively, whereas by using cultural method these pathogens were isolated in 0.43, 1.57 and 1.57% of samples, respectively. In spite of the use of the same enrichment broth, the RT-PCR method disclosed a percentage of positive samples that was negative to cultural examination ranging between 20 and 43%, with a PCR/culture ratio between 2.37 to 5.00. In conclusion, the results of this study pose a doubt about the sensitivity of the official cultural methods regarding the isolation of the three investigated foodborne pathogens. Moreover this study may be a useful tool for veterinary authorities to assess appropriate sampling plans to control the risk relating to the consumption of contaminated foods.

Optimization of single plate-serial dilution spotting (SP-SDS) with sample anchoring as an assured method for bacterial and yeast cfu enumeration and single colony isolation from diverse samples

•

SP-SDS forms a simple tool for bacterial cfu estimation for samples with unknown cfu.

•

Prime recommendation of anchoring specimens to fixed initial OD or a standard base.

•

Six serial dilutions of 20 μl each applied per 9-cm plate followed by manual counting.

•

Suits pure and mixed bacterial stocks, spores, yeasts and composite samples.

•

Superior to alternate techniques like track-dilution, drop-plating or drop-spotting.

We propose a simple technique for bacterial and yeast cfu estimations from diverse samples with no prior idea of viable counts, designated as single plate-serial dilution spotting (SP-SDS) with the prime recommendation of sample anchoring (10⁰ stocks). For pure cultures, serial dilutions were prepared from 0.1 OD (10⁰) stock and 20 μl aliquots of six dilutions (10¹–10⁶) were applied as 10–15 micro-drops in six sectors over agar-gelled medium in 9-cm plates. For liquid samples 10⁰–10⁵ dilutions, and for colloidal suspensions and solid samples (10% w/v), 10¹–10⁶ dilutions were used. Following incubation, at least one dilution level yielded 6–60 cfu per sector comparable to the standard method involving 100 μl samples. Tested on diverse bacteria, composite samples and Saccharomyces cerevisiae, SP-SDS offered wider applicability over alternative methods like drop-plating and track-dilution for cfu estimation, single colony isolation and culture purity testing, particularly suiting low resource settings.