A Novel Antifungal System With Potential for Prolonged Delivery of Histatin 5 to Limit Growth of Candida albicans

Reducing Temperature of Fused Deposition Modelling 3D Printing for Linalool Fast Dissolving Oral Films by Increasing Printer Nozzle Diameter

Oral thrush and throat infections can occur in a wide range of patients. Treatments are available; however, resistance to drugs is a major problem for treating oral and throat infections. Three-dimensional printing (3DP) of fast dissolving oral films (FDFs) of linalool oil may provide an alternative solution. Linalool oil FDFs were printed by fused deposition modelling across 1-18 % w/w linalool content range with nozzle diameters of 0.4 or 1 mm at the temperature range of 150 °C-185 °C. The FDFs were evaluated for physicochemical and mechanical properties. Increasing the printer nozzle diameter to 1 mm allowed reducing the printing temperature from 185 °C to 150 °C; consequently, more linalool was quantified in the films with improved content uniformity. The higher linalool content in the films increased the film disintegration time and mechanical strength. FDFs containing 10% w/w linalool showed clear antifungal activity against Candida albicans. Raman spectroscopy suggested linalool separation from excipients at higher temperature printing. Viscoelastic measurements indicated that to achieve printing; the elastic modulus of molten filament needed to be higher than the loss modulus at low angular frequencies. In conclusion, increasing the printing nozzle diameter may avoid loss of the active ingredient by reducing the temperature of the 3DP process.

Candida albicans skin infection in diabetic patients: An updated review of pathogenesis and management

Candida species, commensal residents of human skin, are recognized as the cause of cutaneous candidiasis across various body surfaces. Individuals with weakened immune systems, particularly those with immunosuppressive conditions, are significantly more susceptible to this infection. Diabetes mellitus, a major metabolic disorder, has emerged as a critical factor inducing immunosuppression, thereby facilitating Candida colonization and subsequent skin infections. This comprehensive review examines the prevalence of different types of Candida albicans-induced cutaneous candidiasis in diabetic patients. It explores the underlying mechanisms of pathogenicity and offers insights into recommended preventive measures and treatment strategies. Diabetes notably increases vulnerability to oral and oesophageal candidiasis. Additionally, it can precipitate vulvovaginal candidiasis in females, Candida balanitis in males, and diaper candidiasis in young children with diabetes. Diabetic individuals may also experience candidal infections on their nails, hands and feet. Notably, diabetes appears to be a risk factor for intertrigo syndrome in obese individuals and periodontal disorders in denture wearers. In conclusion, the intricate relationship between diabetes and cutaneous candidiasis necessitates a comprehensive understanding to strategize effective management planning. Further investigation and interdisciplinary collaborative efforts are crucial to address this multifaceted challenge and uncover novel approaches for the treatment, management and prevention of both health conditions, including the development of safer and more effective antifungal agents.

Development and Characterization of New Miconazole-Based Microemulsions for Buccal Delivery by Implementing a Full Factorial Design Modeling

This research aimed to develop miconazole-based microemulsions using oleic acid as a natural lipophilic phase and a stabilizer mixture comprising Tween 20 and PEG 400 to solubilize miconazole as an antifungal agent known for its activity in oral candidiasis and to improve its bioavailability. The formulation and preparation process was combined with a mathematical approach using a 23-full factorial plan. Fluid and gel-like microemulsions were obtained and analyzed considering pH, conductivity, and refractive index, followed by extensive analyses focused on droplet size, zeta potential, rheological behavior, and goniometry. In vitro release tests were performed to assess their biopharmaceutical characteristics. Independent variables coded X1-Oleic acid (%, w/w), X2-Tween 20 (%, w/w), and X3-PEG 400 (%, w/w) were analyzed in relationship with three main outputs like mean droplet size, work of adhesion, and diffusion coefficient by combining statistical tools with response surface methodology. The microemulsion containing miconazole base-2%, oleic acid-5%, Tween 20-40%, PEG 400-20%, and water-33% exhibited a mean droplet size of 119.6 nm, a work of adhesion of 71.98 mN/m, a diffusion coefficient of 2.11·10-5 cm2/s, and together with remarked attributes of two gel-like systems formulated with higher oil concentrations, modeled the final optimization step of microemulsions as potential systems for buccal delivery.

Nanoparticles assisted intra and transdermic delivery of antifungal ointment: an updated review

This review paper highlights the trans-dermic delivery of nanoparticles (NPs) based antifungal ointments with the help of nanotechnology. It also describes the novel trans-dermal approach utilizing various nanoparticles which enables an efficient delivery to the target site. This current review gives an overview about past research and developments as well as the current nanoparticle-based ointments. This review also presents data regarding types, causes of infection, and different pathogens within their infection site. It also gives information about antifungal ointments with their activity and side effects of antifungal medicines. Additionally, this review also focuses on the future aspects of the topical administration of nanoparticle-based antifungal ointments. These nanoparticles can encapsulate multiple antifungal drugs as a combination therapy targeting different aspects of fungal infection. Nanoparticles can be designed in such a way that they can specifically target fungal cells and do not affect healthy cells. Nanoparticle based antifungal ointments exhibit outstanding potential to treat fungal diseases. As further research and advancements evolve in nanotechnology, we expect more development of nanoparticle-based antifungal formulations shortly. This paper discusses all the past and future applications, recent trends, and developments in the various field and also shows its bright prospective in the upcoming years.

Nanotechnology-based fungal detection and treatment: current status and future perspective

Fungal infections impose a significant impact on global health and encompass major expenditures in medical treatments. Human mycoses, a fungal co-infection associated with SARS-CoV-2, is caused by opportunistic fungal pathogens and is often overlooked or misdiagnosed. Recently, there is increasing threat about spread of antimicrobial resistance in fungus, mostly in hospitals and other healthcare facilities. The diagnosis and treatment of fungal infections are associated with several issues, including tedious and non-selective detection methods, the growth of drug-resistant bacteria, severe side effects, and ineffective drug delivery. Thus, a rapid and sensitive diagnostic method and a high-efficacy and low-toxicity therapeutic approach are needed. Nanomedicine has emerged as a viable option for overcoming these limitations. Due to the unique physicochemical and optical properties of nanomaterials and newer biosensing techniques, nanodiagnostics play an important role in the accurate and prompt differentiation and detection of fungal diseases. Additionally, nano-based drug delivery techniques can increase drug permeability, reduce adverse effects, and extend systemic circulation time and drug half-life. This review paper is aimed at highlighting recent, promising, and unique trends in nanotechnology to design and develop diagnostics and treatment methods for fungal diseases.

Encapsulation of a novel peptide derived from histatin-1 in liposomes against initial enamel caries in vitro and in vivo

OBJECTIVES

Biomimetic mineralization mediated by proteins and peptides is a promising strategy for enamel repair, and its specific application model needs more research. In this work, we exploited a liposomal delivery system for a novel peptide (DK5) derived from histatin-1 (DK5-Lips) as a new biomimetic mineralization strategy against initial enamel caries.

MATERIALS AND METHODS

The DK5-Lips was prepared using calcium acetate gradient method and then the in vitro release, salivary stability, and cytotoxicity were studied. Initial enamel caries was created in bovine enamel blocks and subjected to pH-cycling model treated with DK5-Lips. Surface microhardness testing, polarized light microscopy (PLM), and transverse microradiography (TMR) were analyzed. Then the biocompatibility of DK5-Lips was evaluated in the caries model of Sprague-Dawley rats, and the anti-caries effect was assessed using Micro-CT analysis, Keyes scores, and PLM in vivo.

RESULTS

DK5-Lips provided a mean particle size of (97.63 ± 4.94)nm and encapsulation efficiency of (61.46 ± 1.44)%, exhibiting a sustained release profile, excellent stability in saliva, and no significant toxicity on human gingival fibroblasts (HGFs). The DK5-Lips group had higher surface microhardness recovery, shallower caries depth, and less mineral loss in bovine enamel. Animal experiments showed higher volume and density values of residual molar enamel, lower Keyes score, and shallower lesion depth of the DK5-Lips group with good biocompatibility.

CONCLUSION

As a safe and effective application model, DK5-Lips could significantly promote the remineralization of initial enamel caries both in vitro and in vivo.

CLINICAL RELEVANCE

The potential of liposome utilization as vehicle for oral delivery of functional peptides may provide a new way for enamel restoration.

Development of a Novel Histatin-5 Mucoadhesive Gel for the Treatment of Oral Mucositis: In Vitro Characterization and In Vivo Evaluation

Antimicrobial peptides have appeared to be promising candidates for therapeutic purposes due to their broad antimicrobial activity and non-toxicity. Histatin-5 (Hst-5) is a notable salivary antimicrobial peptide that exhibited therapeutic properties in the oral cavity. Oral mucositis is an acute inflammation of the oral cavity, following cancer therapy. The current treatment methods of oral mucositis have low effectiveness. The aim of this study was to design, formulate and characterize a mucoadhesive gel delivery system for Hst-5 usage in the treatment of oral mucositis. Carbopol 934 and hydroxypropyl methylcellulose (HPMC) have been used in the development of a Hst-5 mucoadhesive gel that was optimized by using Box-Behnken design. The optimized formulation was evaluated in-vitro, based on mucoadhesive strength, viscoelasticity, spreadability, release rate, peptide secondary structure analysis, antimicrobial activity, and storage stability. The efficacy of Hst-5 gel was assessed in vivo in a chemotherapy-induced mucositis model. The results showed a sustained release of Hst-5 from the new formulation. Hst-5 gel exerted antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans. The histopathological, immunohistochemical and statistical analysis showed that the Hst-5 gel had wound healing activity in vivo. The findings of this study indicate that the mentioned compound possesses promising potential as a novel and efficient therapeutic agent in managing oral mucositis. Moreover, the results suggest that the compound is commercially feasible for further development and utilization.

Anti-biofilm effect of salivary histatin 5 on Porphyromonas gingivalis

This study aimed to investigate the effects of salivary histatin 5 (Hst5) on Porphyromonas gingivalis (P. gingivalis) biofilms in vitro and in vivo and the possible mechanisms. In in vitro experiments, P. gingivalis biomass was determined by crystal violet staining. Polymerase chain reaction, scanning electron microscopy, and confocal laser scanning microscopy were used to determine the Hst5 concentration. A search for potential targets was performed using transcriptomic and proteomic analyses. In vivo experimental periodontitis was established in rats to evaluate the effects of Hst5 on periodontal tissues. Experimental results showed that 25 µg/mL Hst5 effectively inhibited biofilm formation, and increased concentrations of Hst5 increased the inhibitive effect. Hst5 might bind to the outer membrane protein RagAB. A combination of transcriptomic and proteomic analyses revealed that Hst5 could regulate membrane function and metabolic processes in P. gingivalis, in which RpoD and FeoB proteins were involved. In the rat periodontitis model, alveolar bone resorption and inflammation levels in periodontal tissues were reduced by 100 µg/mL Hst5. This study showed that 25 µg/mL Hst5 inhibited P. gingivalis biofilm formation in vitro by changing membrane function and metabolic process, and RpoD and FeoB proteins might play important roles in this process. Moreover, 100 µg/mL Hst5 inhibited periodontal inflammation and alveolar bone loss in rat periodontitis via its antibacterial and anti-inflammatory effects. KEY POINTS: • Anti-biofilm activity of histatin 5 on Porphyromonas gingivalis was investigated. • Histatin 5 inhibited Porphyromonas gingivalis biofilm formation. • Histatin 5 showed inhibitory effects on the occurrence of rat periodontitis.

Pharmaceutical nanotechnology: Antimicrobial peptides as potential new drugs against WHO list of critical, high, and medium priority bacteria

Nanobiotechnology is a relatively unexplored area that has, nevertheless, shown relevant results in the fight against some diseases. Antimicrobial peptides (AMPs) are biomacromolecules with potential activity against multi/extensively drug-resistant bacteria, with a lower risk of generating bacterial resistance. They can be considered an excellent biotechnological alternative to conventional drugs. However, the application of several AMPs to biological systems is hampered by their poor stability and lifetime, inactivating them completely. Therefore, nanotechnology plays an important role in the development of new AMP-based drugs, protecting and carrying the bioactive to the target. This is the first review article on the different reported nanosystems using AMPs against bacteria listed on the WHO priority list. The current shortage of information implies a nanobiotechnological potential to obtain new drugs or repurpose drugs based on the AMP-drug synergistic effect.

Advanced Drug Delivery Platforms for the Treatment of Oral Pathogens

The oral cavity is a complex ecosystem accommodating various microorganisms (e.g., bacteria and fungi). Various factors, such as diet change and poor oral hygiene, can change the composition of oral microbiota, resulting in the dysbiosis of the oral micro-environment and the emergence of pathogenic microorganisms, and consequently, oral infectious diseases. Systemic administration is frequently used for drug delivery in the treatment of diseases and is associated with the problems, such as drug resistance and dysbiosis. To overcome these challenges, oral drug delivery systems (DDS) have received considerable attention. In this literature review, the related articles are identified, and their findings, in terms of current therapeutic challenges and the applications of DDSs, especially nanoscopic DDSs, for the treatment of oral infectious diseases are highlighted. DDSs are also discussed in terms of structures and therapeutic agents (e.g., antibiotics, antifungals, antiviral, and ions) that they deliver. In addition, strategies (e.g., theranostics, hydrogel, microparticle, strips/fibers, and pH-sensitive nanoparticles), which can improve the treatment outcome of these diseases, are highlighted.

Nanoparticles in Dentistry: A Comprehensive Review

In recent years, nanoparticles (NPs) have been receiving more attention in dentistry. Their advantageous physicochemical and biological properties can improve the diagnosis, prevention, and treatment of numerous oral diseases, including dental caries, periodontal diseases, pulp and periapical lesions, oral candidiasis, denture stomatitis, hyposalivation, and head, neck, and oral cancer. NPs can also enhance the mechanical and microbiological properties of dental prostheses and implants and can be used to improve drug delivery through the oral mucosa. This paper reviewed studies from 2015 to 2020 and summarized the potential applications of different types of NPs in the many fields of dentistry.

Rhamnolipid-Based Liposomes as Promising Nano-Carriers for Enhancing the Antibacterial Activity of Peptides Derived from Bacterial Toxin-Antitoxin Systems

Background

Antimicrobial resistance poses substantial risks to human health. Thus, there is an urgent need for novel antimicrobial agents, including alternative compounds, such as peptides derived from bacterial toxin-antitoxin (TA) systems. ParELC3 is a synthetic peptide derived from the ParE toxin reported to be a good inhibitor of bacterial topoisomerases and is therefore a potential antibacterial agent. However, ParELC3 is inactive against bacteria due to its inability to cross the bacterial membranes. To circumvent this limitation we prepared and used rhamnolipid-based liposomes to carry and facilitate the passage of ParELC3 through the bacterial membrane to reach its intracellular target - the topoisomerases.

Methods and Results

Small unilamellar liposome vesicles were prepared by sonication from three formulations that included 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine and cholesterol. ParELC3 was loaded with high efficiency into the liposomes. Characterization by DLS and TEM revealed the appropriate size, zeta potential, polydispersity index, and morphology. In vitro microbiological experiments showed that ParELC3 loaded-liposomes are more efficient (29 to 11 µmol·L⁻¹) compared to the free peptide (>100 µmol·L⁻¹) at inhibiting the growth of standard E. coli and S. aureus strains. RL liposomes showed high hemolytic activity but when prepared with POPC and Chol this activity had a significant reduction. Independently of the formulation, the vesicles had no detectable cytotoxicity to HepG2 cells, even at the highest concentrations tested (1.3 mmol·L⁻¹ and 50 µmol·L⁻¹ for rhamnolipid and ParELC3, respectively).

Conclusion

The present findings suggest the potential use of rhamnolipid-based liposomes as nanocarrier systems to enhance the bioactivity of peptides.

Innate Inspiration: Antifungal Peptides and Other Immunotherapeutics From the Host Immune Response

The purpose of this review is to describe antifungal therapeutic candidates in preclinical and clinical development derived from, or directly influenced by, the immune system, with a specific focus on antimicrobial peptides (AMP). Although the focus of this review is AMP with direct antimicrobial effects on fungi, we will also discuss compounds with direct antifungal activity, including monoclonal antibodies (mAb), as well as immunomodulatory molecules that can enhance the immune response to fungal infection, including immunomodulatory AMP, vaccines, checkpoint inhibitors, interferon and colony stimulating factors as well as immune cell therapies. The focus of this manuscript will be a non-exhaustive review of antifungal compounds in preclinical and clinical development that are based on the principles of immunology and the authors acknowledge the incredible amount of in vitro and in vivo work that has been conducted to develop such therapeutic candidates.

Bio- and Nanotechnology as the Key for Clinical Application of Salivary Peptide Histatin: A Necessary Advance

Candida albicans is a common microorganism of human’s microbiota and can be easily found in both respiratory and gastrointestinal tracts as well as in the genitourinary tract. Approximately 30% of people will be infected by C. albicans during their lifetime. Due to its easy adaptation, this microorganism started to present high resistance to antifungal agents which is associated with their indiscriminate use. There are several reports of adaptive mechanisms that this species can present. Some of them are intrinsic alteration in drug targets, secretion of extracellular enzymes to promote host protein degradation and efflux receptors that lead to a diminished action of common antifungal and host’s innate immune response. The current review aims to bring promising alternatives for the treatment of candidiasis caused mainly by C. albicans. One of these alternatives is the use of antifungal peptides (AFPs) from the Histatin family, like histatin-5. Besides that, our focus is to show how nanotechnology can allow the application of these peptides for treatment of this microorganism. In addition, our intention is to show the importance of nanoparticles (NPs) for this purpose, which may be essential in the near future.

Controlling biofilms using synthetic biology approaches

Bacterial biofilms are formed by the complex but ordered regulation of intra- or inter-cellular communication, environmentally responsive gene expression, and secretion of extracellular polymeric substances. Given the robust nature of biofilms due to the non-growing nature of biofilm bacteria and the physical barrier provided by the extracellular matrix, eradicating biofilms is a very difficult task to accomplish with conventional antibiotic or disinfectant treatments. Synthetic biology holds substantial promise for controlling biofilms by improving and expanding existing biological tools, introducing novel functions to the system, and re-conceptualizing gene regulation. This review summarizes synthetic biology approaches used to eradicate biofilms via protein engineering of biofilm-related enzymes, utilization of synthetic genetic circuits, and the development of functional living agents. Synthetic biology also enables beneficial applications of biofilms through the production of biomaterials and patterning biofilms with specific temporal and spatial structures. Advances in synthetic biology will add novel biofilm functionalities for future therapeutic, biomanufacturing, and environmental applications.