Alternative Strategies for Microbial Remediation of Pollutants via Synthetic Biology

Microbial degradation mechanisms, degradation pathways, and genetic engineering for pyrethroids: current knowledge and future perspectives

Pyrethroids are synthetic products derived from natural pyrethroids present in flowers and are extensively used as pesticides for agriculture, animal husbandry, and household pest control. However, excessive and prolonged usage of pyrethroid insecticides can result in adverse effects on both non-target and target species. Therefore, effective technologies need to be developed to remove pyrethroid contamination and ensure environmental safety. Microbial remediation of various pesticide contaminants is highly practicable, low cost, and eco-friendly compared to physical and chemical methods. Different microbiota are screened to eliminate or degrade the contaminants. Microbial remediation technology utilizes the natural ability of microbiota to treat contaminated areas. Previous studies have mostly focused on the isolation and screening of microorganisms for pyrethroid biodegradation, as well as on the kinetics and pathways of pyrethroid biodegradation. In order to develop effective bioremediation strategies, further research based on molecular biology and bioengineering is required for a comprehensive exploration of pyrethroid-degrading microorganisms. To date, the microbial degradation of pyrethroid pesticides and the underlying mechanisms have been rarely reviewed. Therefore, this critical review encompasses the latest knowledge on synthetic pyrethroids from structural properties, bio-toxicity, and characterization of microbial degradation strains to degradation characteristics, intrinsic mechanisms, and microbial degradation pathways. The future of microbial remediation depends on combining advanced gene technology with traditional bioremediation methods to sustainably degrade pesticide contaminants. It also summarizes the factors affecting degradation efficiency and concludes with prospects, along with current challenges and limitations.

Bioremediation technologies for remediation of dyes from wastewater

The colored dyes are extensively applied in diverse industrial setups such as textiles, paper, leather, and cosmetics. The unutilized dyes are released in the waste and pose a serious menace to the environment, ecological balance, and human health. Because of their chemical nature, they are extremely resistant to common methods of treatment and often persist in the aquatic environment. A sustainable and eco-friendly approach for treating dye-contaminated wastewater is "bioremediation." This manuscript aims to discuss the exclusive role of diversified microorganisms and plants, immobilized microbial cells/enzymes, microbial consortia, nanomaterials, and combination approaches in the bioremediation of dyes. It also provides a comprehensive understanding of different bio-remedial technologies used to remove dyes from wastewater. In addition, the underlying mechanisms affecting the efficacy of bio-remedial technologies, the latest breakthroughs, challenges, and potential solutions in scaling up, and prospects in this area are also explored. We also detail the noteworthiness of genetic engineering in different bioremediation technologies to solve the issues associated with dye contamination in wastewater and its removal from the environment.

A review on e-waste contamination, toxicity, and sustainable clean-up approaches for its management

Ecosystems and human health are being negatively impacted by the growing problem of electrical waste, especially in developing countries. E-waste poses a significant risk to ecological systems because it can release a variety of hazardous substances into the environment, containing polybrominated diphenyl ethers and heavy metals, brominated flame retardants, polychlorinated dibenzofurans and polycyclic aromatic hydrocarbons, and dioxins. This review article provides a critical assessment of the toxicological consequences of e-waste on ecosystems and human health and data analyses from scientific journals and grey literature on metals, BFRs, PBDEs, PCDFs, and PAHs in several environmental compartments of commercial significance in informal electronic trash recycling. The currently available techniques and tools employed for treating e-waste are sustainable techniques such as bioremediation, chemical leaching, biological leaching, and pyrometallurgy have been also discussed along with the necessity of implementing strong legislation to address the issue of unregulated exports of electronic trash in recycling practices. Despite the ongoing hurdles, implementing environmentally sustainable recycling methods have the potential to address the detrimental impacts of e-waste and foster positive economic development.

Insect-microbe interactions and their influence on organisms and ecosystems

Microorganisms are important associates of insect and arthropod species. Insect-associated microbes, including bacteria, fungi, and viruses, can drastically impact host physiology, ecology, and fitness, while many microbes still have no known role. Over the past decade, we have increased our knowledge of the taxonomic composition and functional roles of insect-associated microbiomes and viromes. There has been a more recent shift toward examining the complexity of microbial communities, including how they vary in response to different factors (e.g., host genome, microbial strain, environment, and time), and the consequences of this variation for the host and the wider ecological community. We provide an overview of insect-microbe interactions, the variety of associated microbial functions, and the evolutionary ecology of these relationships. We explore the influence of the environment and the interactive effects of insects and their microbiomes across trophic levels. Additionally, we discuss the potential for subsequent synergistic and reciprocal impacts on the associated microbiomes, ecological interactions, and communities. Lastly, we discuss some potential avenues for the future of insect-microbe interactions that include the modification of existing microbial symbionts as well as the construction of synthetic microbial communities.

Microbial remediation of petroleum-contaminated soil focused on the mechanism and microbial response: a review

The environmental pollution caused by petroleum hydrocarbons has received considerable attention in recent years. Microbial remediation has emerged as the preferred method for the degradation of petroleum hydrocarbons, which is experiencing rapid development driven by advancements in molecular biology. Herein, the capacity of different microorganisms used for crude oil bioremediation was reviewed. Moreover, factors influencing the effectiveness of microbial remediation were discussed. Microbial remediation methods, such as bioaugmentation, biostimulation, and bioventilation, are summarized in this review. Aerobic and anaerobic degradation mechanisms were reviewed to elucidate the metabolic pathways involved. The impacts of petroleum hydrocarbons on microorganisms and the environment were also revealed. A brief overview of synthetic biology and a unique perspective of technique combinations were presented to provide insight into research trends. The challenges and future outlook were also presented to stimulate contemplation of the mechanisms involved and the development of innovative techniques.

Emerging environmental contaminants: Sources, effects on biodiversity and humans, remediation, and conservation implications

Ecosystems, biodiversity, and the human population all depend on a quality or uncontaminated environment. Quality environment provides people and wildlife access to nutrition, medications, dietary supplements, and other ecosystem services. The conservation of biodiversity-that is, species richness, abundance, heredities, and diversity-as well as the control of climate change are facilitated by such an uncontaminated environment. However, these advantages are jeopardized by newly emerging environmental chemical contaminants (EECCs) brought on by increased industrialization and urbanization. In developing countries, inadequate or poor environmental policies, infrastructure, and national standards concerning the usage, recycling, remediation, control, and management of EECCs hasten their effects. EECCs in these countries negatively affect biodiversity, ecological services and functions, and human health. This review reveals that the most deprived or vulnerable local communities in developing countries are those residing near mining or industrial areas and cultivating their crops and vegetables on contaminated soils, as is wildlife that forages or drinks in EECC-contaminated water bodies. Yet, people in these countries have limited knowledge about EECCs, their threats to human well-being, ecosystem safety, and the environment, as well as remediation technologies. Besides, efforts to efficiently control, combat, regulate, and monitor EECCs are limited. Thus, the review aims to increase public knowledge concerning EECCs in developing countries and present a comprehensive overview of the current status of EECCs. It also explores the sources and advancements in remediation techniques and the threats of EECCs to humans, ecosystems, and biodiversity.

Activated DBP degradation and relevant signal transduction path via quorum sensing autoinducers in Streptomyces sp. SH5

Microbe-mediated DBP (dibutyl phthalate) mineralization is acknowledged to be affected by diverse extracellular factors. However, little is known about the regulatory effects from quorum sensing (QS) signals. In this study, extracellularly applied QS signals A-like (hydroxymethyl dihydrofuran) was discovered to significantly enhance DBP degradation efficiency in Streptomyces sp. SH5. Monobutyl phthalate, protocatechuic acid and beta-ketoadipate were discovered as degradation intermediates by HPLC-TOF-MS/MS. Multi-omics analysis revealed the up-regulation of multiple hydrolases, transferases and decarboxylases that potentially contributed to A-like accelerated DBP degradation. Transcription of Orf2708, an orthologue of global transcriptional activator, was significantly induced by A-like. Orf2708 was demonstrated to interact specifically with the promoter of hydrolase orf2879 gene by EMSA, and the overexpression of orf2879 led to an enhanced DBP degradation in SH5. Taken together with the molecular docking studies showing the stability of ligand-receptor complex of A-like and its potential receptor Orf3712, a hierarchical regulatory cascade underlying the QS signal mediated DBP degradation was proposed as A-like/Orf3712 duplex formation, enhanced orf2708 expression and the downstream specific activation of hydrolase Orf2879. Our study presents the first evidence of GBLs-type promoted DBP degradation among bacteria, and the elucidated signal transduction path indicates a universal application potential of this activation strategy.

Microbial-based metabolites associated with degradation of imidacloprid and its impact on stress-responsive proteins

Imidacloprid (IMD), a neonicotinoid insecticide, is intensively used in agricultural fields for effective protection against aphids, cane beetles, thrips, stink bugs, locusts, etc., is causing serious environmental concerns. In recent years, seed treatment with Imidacloprid is being practiced mainly to prevent sucking insect pests. In India, due to the increase in application of this insecticide residue has been proven to have an impact on the quality of soil and water. In view of this, the current investigation is focussed on sustainable approach to minimize the residual effect of IMD in agricultural fields. The present study reveals a most promising imidacloprid resistant bacterium Lysinibacillus fusiformis IMD-Bio5 strain isolated from insecticide-contaminated soil. The isolated bacterial strain upon tested for its biodegradation potential on mineral salt medium (MSM) showed a significant survival growth at 150 g/L of IMD achieved after 3 days, whereas immobilized cells on MSM amended with 200 g/L of IMD as the sole carbon source provided degradation of 188 and 180 g/L of IMD in silica beads and sponge matrices, respectively. The liquid chromatography mass spectrometry was performed to test the metabolite responsive for IMD biodegradation potential of L. fusiformis IMD-Bio5 which showed the induced activity of the metabolite 6-Chloronicotinic acid. Furthermore, as compared to the untreated control, the Lysinibacillus fusiformis IMD-Bio5 protein profile revealed a range of patterns showing the expression of stress enzymes. Thus, results provided a most effective bacterium enabling the removal of IMD-like hazardous contaminants from the environment, which contributes to better agricultural production and soil quality, while long-term environmental advantages are restored.

Deciphering the potential role of quorum quenching in efficient aerobic denitrification driven by a synthetic microbial community

Low efficiency is one of the main challenges for the application of aerobic denitrification technology in wastewater treatment. To improve denitrification efficiency, a synthetic microbial community (SMC) composed of denitrifiers Acinetobacter baumannii N1 (AC), Pseudomonas aeruginosa N2 (PA) and Aeromonas hydrophila (AH) were constructed. The nitrate (NO3--N) reduction efficiency of the SMC reached 97 % with little nitrite (NO2--N) accumulation, compared to the single-culture systems and co-culture systems. In the SMC, AH proved to mainly contribute to NO3--N reduction with the assistance of AC, while PA exerted NO2--N reduction. AC and AH secreted N-hexanoyl-DL-homoserine lactone (C6-HSL) to promote the electron transfer from the quinone pool to nitrate reductase. The declined N-(3-oxododecanoyl)-L-homoserine lactone (3OC12-HSL), resulting from quorum quenching (QQ) by AH, stimulated the excretion of pyocyanin, which could improve the electron transfer from complex III to downstream denitrifying enzymes for NO2--N reduction. In addition, C6-HSL mainly secreted by PA led to the up-regulation of TCA cycle-related genes and provided sufficient energy (such as NADH and ATP) for aerobic denitrification. In conclusion, members of the SMC achieved efficient denitrification through the interactions between QQ, electron transfer, and energy metabolism induced by N-acyl-homoserine lactones (AHLs). This study provided a theoretical basis for the engineering application of synthetic microbiome to remove nitrate wastewater.

Strategies for mitigation of pesticides from the environment through alternative approaches: A review of recent developments and future prospects

Chemical-based peticides are having negative impacts on both the healths of human beings and plants as well. The World Health Organisation (WHO), reported that each year, >25 million individuals in poor nations are having acute pesticide poisoning cases along with 20,000 fatal injuries at global level. Normally, only ∼0.1% of the pesticide reaches to the intended targets, and rest amount is expected to come into the food chain/environment for a longer period of time. Therefore, it is crucial to reduce the amounts of pesticides present in the soil. Physical or chemical treatments are either expensive or incapable to do so. Hence, pesticide detoxification can be achieved through bioremediation/biotechnologies, including nano-based methodologies, integrated approaches etc. These are relatively affordable, efficient and environmentally sound methods. Therefore, alternate strategies like as advanced biotechnological tools like as CRISPR Cas system, RNAi and genetic engineering for development of insects and pest resistant plants which are directly involved in the development of disease- and pest-resistant plants and indirectly reduce the use of pesticides. Omics tools and multi omics approaches like metagenomics, genomics, transcriptomics, proteomics, and metabolomics for the efficient functional gene mining and their validation for bioremediation of pesticides also discussed from the literatures. Overall, the review focuses on the most recent advancements in bioremediation methods to lessen the effects of pesticides along with the role of microorganisms in pesticides elimination. Further, pesticide detection is also a big challenge which can be done by using HPLC, GC, SERS, and LSPR ELISA etc. which have also been described in this review.

Transformation of hydroxylated polychlorinated biphenyls by bacterial 2-hydroxybiphenyl 3-monooxygenase

Monohydroxylated PCBs (OH-PCBs) are an (eco)toxicologically significant group of compounds, as they arise from the oxidation of polychlorinated biphenyls (PCBs) and, at the same time, may exert even more severe toxic effects than their parent PCB molecules. Despite having been widely detected in environmental samples, plants, and animals, information on the fate of OH-PCBs in the environment is scarce, including on the enzymatic machinery behind their degradation. To date, only a few bacterial taxa capable of OH-PCB transformation have been reported. In this study, we aimed to obtain a deeper insight into the transformation of OH-PCBs in soil bacteria and isolated a Pseudomonas sp. strain P1B16 based on its ability to use o-phenylphenol (2-PP) which, when exposed to the Delor 103-derived OH-PCB mixture, depleted a wide spectrum of mono-, di, and trichlorinated OH-PCBs. In the P1B16 genome, a region designated as hbp was identified, which bears a set of putative genes involved in the transformation of OH-PCBs, namely hbpA encoding for a putative flavin-dependent 2-hydroxybiphenyl monooxygenase, hbpC (2,3-dihydroxybiphenyl-1,2-dioxygenase), hbpD (2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate hydrolase), and the transcriptional activator-encoding gene hbpR. The hbpA coding sequence was heterologously expressed, purified, and its substrate specificity was investigated towards the Delor 103-derived OH-PCB mixture, individual OH-PCBs, and multiple (chlorinated) phenolics. Apart from 2-PP and 2-chlorophenol, HbpA was also demonstrated to transform a range of OH-PCBs, including a 3-hydroxy-2,2',4',5,5'-pentachlorobiphenyl. Importantly, this is the first direct evidence of HbpA homologs being involved in the degradation of OH-PCBs. Moreover, using a P1B16-based biosensor strain, the specific induction of hbp genes by 2-PP, 3-phenylphenol, 4-phenylphenol, and the OH-PCB mixture was demonstrated. This study provides direct evidence on the specific enzymatic machinery responsible for the transformation of OH-PCBs in bacteria, with many implications in ecotoxicology, environmental restoration, and microbial ecology in habitats burdened with PCB contamination.

A critical review of sustainable pesticide remediation in contaminated sites: Research challenges and mechanistic insights

Incidental pesticide application on farmlands can result in contamination of off-target biota, soil, groundwater, and surrounding ecosystems. To manage these pesticide contaminations sustainably, it is important to utilize advanced approaches to pesticide decontamination. This review assesses various innovative strategies applied for remediating pesticide-contaminated sites, including physical, chemical, biological, and nanoremediation. Integrated remediation approaches appear to be more effective than singular technologies. Bioremediation and chemical remediation are considered suitable and sustainable strategies for decontaminating contaminated soils. Furthermore, this study highlights key mechanisms underlying advanced pesticide remediation that have not been systematically studied. The transformation of applied pesticides into metabolites through various biotic and chemical triggering factors is well documented. Ex-situ and in-situ technologies are the two main categories employed for pesticide remediation. However, when selecting a remediation technique, it is important to consider factors such as application sites, cost-effectiveness, and specific purpose. In this review, the sustainability of existing pesticide remediation strategies is thoroughly analyzed as a pioneering effort. Additionally, the study summarizes research uncertainties and technical challenges associated with different remediation approaches. Lastly, specific recommendations and policy advocacy are suggested to enhance contemporary remediation approaches for cleaning up pesticide-contaminated sites.

Synthetic biology tools for environmental protection

Synthetic biology transforms the way we perceive biological systems. Emerging technologies in this field affect many disciplines of science and engineering. Traditionally, synthetic biology approaches were commonly aimed at developing cost-effective microbial cell factories to produce chemicals from renewable sources. Based on this, the immediate beneficial impact of synthetic biology on the environment came from reducing our oil dependency. However, synthetic biology is starting to play a more direct role in environmental protection. Toxic chemicals released by industries and agriculture endanger the environment, disrupting ecosystem balance and biodiversity loss. This review highlights synthetic biology approaches that can help environmental protection by providing remediation systems capable of sensing and responding to specific pollutants. Remediation strategies based on genetically engineered microbes and plants are discussed. Further, an overview of computational approaches that facilitate the design and application of synthetic biology tools in environmental protection is presented.

CRISPR-Cas technology secures sustainability through its applications: a review in green biotechnology

The CRISPR-Cas system's applications in biotechnology offer a promising avenue for addressing pressing global challenges, such as climate change, environmental pollution, the energy crisis, and the food crisis, thereby advancing sustainability. The ever-growing demand for food due to the projected population of around 9.6 billion by 2050 requires innovation in agriculture. CRISPR-Cas technology emerges as a powerful solution, enhancing crop varieties, optimizing yields, and improving resilience to stressors. It offers multiple gene editing, base editing, and prime editing, surpassing conventional methods. CRISPR-Cas introduces disease and herbicide resistance, high-yielding, drought-tolerant, and water-efficient crops to address rising water utilization and to improve the efficiency of agricultural practices which promise food sustainability and revolutionize agriculture for the benefit of future generations. The application of CRISPR-Cas technology extends beyond agriculture to address environmental challenges. With the adverse impacts of climate change and pollution endangering ecosystems, there is a growing need for sustainable solutions. The technology's potential in carbon capture and reduction through bio-sequestration is a pivotal strategy for combating climate change. Genomic advancements allow for the development of genetically modified organisms, optimizing biofuel and biomaterial production, and contributing to a renewable and sustainable energy future. This study reviews the multifaceted applications of CRISPR-Cas technology in the agricultural and environmental fields and emphasizes its potential to secure a sustainable future.

Regulation of cadmium-induced biofilm formation by artificial polysaccharide-binding proteins for enhanced phytoremediation

Phytoremediation is an economic way to attenuate soil heavy metal pollution, but is frequently limited by its low pollutant-removing efficiency. Recently, we revealed the close relation between polysaccharide-based biofilm formation and cadmium removal. In this study, for improving the phytoremediation efficiency, an artificial polysaccharide-binding protein was designed by synthetic biology techniques to regulate biofilm formation. The artificial protein Syn contained two polysaccharide-binding domains from the Ruminococcus flavefaciens CttA and the Clostridium cellulolyticum CipC, preferentially binding polysaccharides exposed on both cadmium-treated bacteria and plant roots. Under cadmium stress, Syn remarkably promoted bacterial polysaccharide production from 99 mg/L to 237 mg/L, leading to 1.23-fold higher biofilm biomass. During treatment of the remediation plants with exogenous cadmium-capturing bacteria, Syn improved root biofilm formation, with the root surface polysaccharide contents increasing by 79%, and the Log10 CFU/g root increasing from 7.01 to 7.80. Meanwhile, Syn remodeled the rhizosphere microbiome, especially increasing the abundance of the bacterial groups involved in biofilm formation and stress tolerance, e.g., Pseudomonas, Enterobacter, etc. Consequently, Syn promoted plant cadmium adsorption, with the cadmium-removing efficiency increasing from 17.2% to 33.8%. This study sheds light on synthetic biology-based regulation of biofilm formation for enhanced phytoremediation.

Selection and enrichment of microbial species with an increased lignocellulolytic phenotype from a native soil microbiome by activity-based probing

Multi-omic analyses can provide information on the potential for activity within a microbial community but often lack specificity to link functions to cell, primarily offer potential for function or rely on annotated databases. Functional assays are necessary for understanding in situ microbial activity to better describe and improve microbiome biology. Targeting enzyme activity through activity-based protein profiling enhances the accuracy of functional studies. Here, we introduce a pipeline of coupling activity-based probing with fluorescence-activated cell sorting, culturing, and downstream activity assays to isolate and examine viable populations of cells expressing a function of interest. We applied our approach to a soil microbiome using two activity-based probes to enrich for communities with elevated activity for lignocellulose-degradation phenotypes as determined by four fluorogenic kinetic assays. Our approach efficiently separated and identified microbial members with heightened activity for glycosyl hydrolases, and by expanding this workflow to various probes for other function, this process can be applied to unique phenotype targets of interest.

Pesticide pestilence: Global scenario and recent advances in detection and degradation methods

Increased anthropogenic activities are confronted as the main cause for rising environmental and health concerns globally, presenting an indisputable threat to both environment and human well-being. Modern-day industrialization has given rise to a cascade of concurrent environmental and health challenges. The global human population is growing at an alarming rate, posing tremendous pressure on future food security, and healthy and environmentally sustainable diets for all. To feed all, the global food production needs to increase by 50% by 2050, but this increase has to occur from the limited arable land, and under the present-day climate variabilities. Pesticides have become an integral component of contemporary agricultural system, safeguarding crops from pests and diseases and their use must be reduce to fulfill the SDG (Sustainable Development Goals) agenda . However, their indiscriminate use, lengthy half-lives, and high persistence in soil and aquatic ecosystems have impacted global sustainability, overshot the planetary boundaries and damaged the pure sources of life with severe and negative impacts on environmental and human health. Here in this review, we have provided an overview of the background of pesticide use and pollution status and action strategies of top pesticide-using nations. Additionally, we have summarized biosensor-based methodologies for the rapid detection of pesticide residue. Finally, omics-based approaches and their role in pesticide mitigation and sustainable development have been discussed qualitatively. The main aim of this review is to provide the scientific facts for pesticide management and application and to provide a clean, green, and sustainable environment for future generations.

Artificial mixed microbial system for polycyclic aromatic hydrocarbons degradation

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants with major risks to human health. Biological degradation is environmentally friendly and the most appealing remediation method for a wide range of persistent pollutants. Meanwhile, due to the large microbial strain collection and multiple metabolic pathways, PAH degradation via an artificial mixed microbial system (MMS) has emerged and is regarded as a promising bioremediation approach. The artificial MMS construction by simplifying the community structure, clarifying the labor division, and streamlining the metabolic flux has shown tremendous efficiency. This review describes the construction principles, influencing factors, and enhancement strategies of artificial MMS for PAH degradation. In addition, we identify the challenges and future opportunities for the development of MMS toward new or upgraded high-performance applications.

Improvements in Bioremediation Agents and Their Modified Strains in Mediating Environmental Pollution

Environmental pollution has been a significant concern around the globe as the release of toxic pollutants is associated with carcinogenic, mutagenic, and teratogenic impacts on living organisms. Since microorganisms have the natural potential to degrade toxic metabolites into nontoxic forms, an eco-friendly approach known as bioremediation has been used to tackle toxic-induced pollution. Bioremediation has three fundamental levels, i.e., natural attenuation, bio-augmentation, and biostimulation in which the synthetic biology approach has been lately utilized to enhance the conventional bioremediation techniques. Recently, a more advanced approach of programmable nucleases such as zinc finger nucleases, tale-like effector nucleases, and clustered regularly interspaced short palindromic repeats Cas is being employed to engineer several bacterial, fungal, and algal strains for targeted mutagenesis by knocking in and out specific genes which are involved in reconstructing the metabolic pathways of native microbes. These genetically engineered microorganisms possess heavy metal resistance, greater substrate range, enhanced enzymatic activity, and binding affinity which accelerate the biodegradation of toxic pollutants to environmentally safe levels. This review provides a comprehensive understanding of how we can correlate the novel genetics-based approaches employed to produce genetically engineered microorganisms to enhance the biodegradation of hazardous pollutants, hence, developing a clean and sustainable ecosystem.

Deciphering the recent trends in pesticide bioremediation using genome editing and multi-omics approaches: a review

Pesticide pollution in recent times has emerged as a grave environmental problem contaminating both aquatic and terrestrial ecosystems owing to their widespread use. Bioremediation using gene editing and system biology could be developed as an eco-friendly and proficient tool to remediate pesticide-contaminated sites due to its advantages and greater public acceptance over the physical and chemical methods. However, it is indispensable to understand the different aspects associated with microbial metabolism and their physiology for efficient pesticide remediation. Therefore, this review paper analyses the different gene editing tools and multi-omics methods in microbes to produce relevant evidence regarding genes, proteins and metabolites associated with pesticide remediation and the approaches to contend against pesticide-induced stress. We systematically discussed and analyzed the recent reports (2015-2022) on multi-omics methods for pesticide degradation to elucidate the mechanisms and the recent advances associated with the behaviour of microbes under diverse environmental conditions. This study envisages that CRISPR-Cas, ZFN and TALEN as gene editing tools utilizing Pseudomonas, Escherichia coli and Achromobacter sp. can be employed for remediation of chlorpyrifos, parathion-methyl, carbaryl, triphenyltin and triazophos by creating gRNA for expressing specific genes for the bioremediation. Similarly, systems biology accompanying multi-omics tactics revealed that microbial strains from Paenibacillus, Pseudomonas putida, Burkholderia cenocepacia, Rhodococcus sp. and Pencillium oxalicum are capable of degrading deltamethrin, p-nitrophenol, chlorimuron-ethyl and nicosulfuron. This review lends notable insights into the research gaps and provides potential solutions for pesticide remediation by using different microbe-assisted technologies. The inferences drawn from the current study will help researchers, ecologists, and decision-makers gain comprehensive knowledge of value and application of systems biology and gene editing in bioremediation assessments.

Biotechnology Advances in Bioremediation of Arsenic: A Review

Arsenic is a highly toxic metalloid widespread in the Earth's crust, and its contamination due to different anthropogenic activities (application of agrochemicals, mining, waste management) represents an emerging environmental issue. Therefore, different sustainable and effective remediation methods and approaches are needed to prevent and protect humans and other organisms from detrimental arsenic exposure. Among numerous arsenic remediation methods, those supported by using microbes as sorbents (microbial remediation), and/or plants as green factories (phytoremediation) are considered as cost-effective and environmentally-friendly bioremediation. In addition, recent advances in genetic modifications and biotechnology have been used to develop (i) more efficient transgenic microbes and plants that can (hyper)accumulate or detoxify arsenic, and (ii) novel organo-mineral materials for more efficient arsenic remediation. In this review, the most recent insights from arsenic bio-/phytoremediation are presented, and the most relevant physiological and molecular mechanisms involved in arsenic biological routes, which can be useful starting points in the creation of more arsenic-tolerant microbes and plants, as well as their symbiotic associations are discussed.

Degradation effectiveness of hexachlorohexane (ϒ-HCH) by bacterial isolate Bacillus cereus SJPS-2, its gene annotation for bioremediation and comparison with Pseudomonas putida KT2440

The contamination of Hexachlorohexane (Lindane) in soil and water has toxic effects due to its persistent nature. In our study, an indigenous HCH (gamma isomer) degrading bacterium viz Bacillus cereus SJPS-2 was isolated from Yamuna river water using enrichment culture method. The growth curve indicated that Bacillus cereus SJPS-2 was able to degrade ϒ-HCH effectively with 80.98% degradation. Further, process was improved by using immobilization using alginate beads which showed enhanced degradation (89.34%). Interestingly, in presence of fructose, the ϒ-HCH degradation was up to 79.24% with exponential growth curve whereas the degradation was only 5.61% in presence of glucose revealing diauxic growth curve. Furthermore, The FTIR results confirmed the potential lindane degradation capability of Bacillus cereus SJPS-2 and the bonds were recorded at wavelengths viz. 2900-2500 cm-¹, 3300-2800 cm-¹ and 785-540 cm-¹. Similarity, the GC studies also reconfirmed the degradation potential with retention time (RT) of ethyl acetate and lindane was 2.12 and 11.0 respectively. Further, we studied the metabolic pathway involved for lindane utilization in Bacillus cereus using KEGG-KASS and functional gene annotation through Rapid Annotation using Subsystems Technology (RAST) resulted in the annotation of the lin genes (lin A, lin B, lin C, lin X, lin D, lin E) and respective encoding enzymes. The comparative ϒ-HCH degradation potential of B. cereus and P. putida KT2440 was also evaluated. The island viewer showed the different colors on circular genome indicate the coordinates of genomic islands resulted with some common genomic islands (GEIs) between both bacteria indicating the possibility of horizontal gene transfer at contaminated site or natural environment. These genomic islands (GEIs) contribute in the rearrangement genetic material or to evolve bacteria in stress conditions, as a result the metabolic pathways evolve by formation of catabolic genes. This study establishes the potential of Bacillus cereus SJPS-2 for effectual ϒ-HCH degradation.

Design of Gene Boolean Gates and Circuits with Convergent Promoters

Gene digital circuits are the subject of many research works due to their various potential applications, from hazard detection to medical diagnostic. Moreover, a remarkable number of techniques, developed in electronics, can be used for the construction of biological digital systems. In our previous works, we showed how to automatize the design and modeling of gene digital circuits whose gates were based on transcription and translation regulation. In this chapter, we illustrate how Boolean gates could be implemented by following a particular architecture, the convergent promoter one, rather diffuse in nature but seldom adopted in Synthetic Biology. Beside gate design, we also explain how to extend our previous modeling approach, based on composable parts and pools of molecules, to quantitatively describe and simulate this particular kind of digital biological devices.

Genetically engineered microorganisms for environmental remediation

In the recent era, the increasing persistence of hazardous contaminants is badly affecting the globe in many ways. Due to high environmental contamination, almost every second species on earth facing the worst issue in their survival. Advances in newer remediation approaches may help enhance bioremediation's quality, while conventional procedures have failed to remove hazardous compounds from the environment. Chemical and physical waste cleanup approaches have been used in current circumstances; however, these methods are costly and harmful to the environment. Thus, there has been a rise in the use of bioremediation due to an increase in environmental contamination, which led to the development of genetically engineered microbes (GEMs). It is safer and more cost-effective to use engineered microorganisms rather than alternative methods. GEMs are created by introducing a stronger protein into bacteria through biotechnology or genetic engineering to enhance the desired trait. Biodegradation of oil spills, halobenzoates naphthalenes, toluenes, trichloroethylene, octanes, xylenes etc. has been accomplished using GEMs such bacteria, fungus, and algae. Biotechnologically induced microorganisms are more powerful than naturally occurring ones and may degrade contaminants faster because they can quickly adapt to new pollutants they encounter or co-metabolize. Genetic engineering is a worthy process that will benefit the environment and ultimately the health of our people.

Chemicals/materials of emerging concern in farmlands: sources, crop uptake and potential human health risks

Certain chemicals/materials that are contaminants of emerging concern (CECs) have been widely detected in water bodies and terrestrial systems worldwide while other CECs occur at undetectable concentrations. The primary sources of CECs in farmlands are agricultural inputs, such as wastewater, biosolids, sewage sludge, and agricultural mulching films. The percent increase in cropland area during 1950-2016 was 30 and the rise in land use for food crops during 1960-2018 was 100-500%, implying that there could be a significant CEC burden in farmlands in the future. In fact, the alarming concentrations (μg kg^-1) of certain CECs such as PBDEs, PAEs, and PFOS that occur in farmlands are 383, 35 400 and 483, respectively. Also, metal nanoparticles are reported even at the mg kg^-1 level. Chronic root accumulation followed by translocation of CECs into plants results in their detectable concentrations in the final plant produce. Thus, there is a continuous flow of CECs from farmlands to agricultural produce, causing a serious threat to the terrestrial food chain. Consequently, CECs find their way to the human body directly through CEC-laden plant produce or indirectly via the meat of grazing animals. Thus, human health could be at the most critical risk since several CECs have been shown to cause cancers, disruption of endocrine and cognitive systems, maternal-foetal transfer, neurotoxicity, and genotoxicity. Overall, this comprehensive review provides updated information on contamination of chemicals/materials of concern in farmlands globally, sources for their entry, uptake by crop plants, and their likely impact on the terrestrial food chain and human health.

Implementing re-configurable biological computation with distributed multicellular consortia

The use of synthetic biological circuits to deal with numerous biological challenges has been proposed in several studies, but its implementation is still remote. A major problem encountered is the complexity of the cellular engineering needed to achieve complex biological circuits and the lack of general-purpose biological systems. The generation of re-programmable circuits can increase circuit flexibility and the scalability of complex cell-based computing devices. Here we present a new architecture to produce reprogrammable biological circuits that allow the development of a variety of different functions with minimal cell engineering. We demonstrate the feasibility of creating several circuits using only a small set of engineered cells, which can be externally reprogrammed to implement simple logics in response to specific inputs. In this regard, depending on the computation needs, a device composed of a number of defined cells can generate a variety of circuits without the need of further cell engineering or rearrangements. In addition, the inclusion of a memory module in the circuits strongly improved the digital response of the devices. The reprogrammability of biological circuits is an intrinsic capacity that is not provided in electronics and it may be used as a tool to solve complex biological problems.

Comparison of Kill Switch Toxins in Plant-Beneficial Pseudomonas fluorescens Reveals Drivers of Lethality, Stability, and Escape

Kill switches provide a biocontainment strategy in which unwanted growth of an engineered microorganism is prevented by expression of a toxin gene. A major challenge in kill switch engineering is balancing evolutionary stability with robust cell killing activity in application relevant host strains. Understanding host-specific containment dynamics and modes of failure helps to develop potent yet stable kill switches. To guide the design of robust kill switches in the agriculturally relevant strain Pseudomonas fluorescens SBW25, we present a comparison of lethality, stability, and genetic escape of eight different toxic effectors in the presence of their cognate inactivators (i.e., toxin-antitoxin modules, polymorphic exotoxin-immunity systems, restriction endonuclease-methyltransferase pair). We find that cell killing capacity and evolutionary stability are inversely correlated and dependent on the level of protection provided by the inactivator gene. Decreasing the proteolytic stability of the inactivator protein can increase cell killing capacity, but at the cost of long-term circuit stability. By comparing toxins within the same genetic context, we determine that modes of genetic escape increase with circuit complexity and are driven by toxin activity, the protective capacity of the inactivator, and the presence of mutation-prone sequences within the circuit. Collectively, the results of our study reveal that circuit complexity, toxin choice, inactivator stability, and DNA sequence design are powerful drivers of kill switch stability and valuable targets for optimization of biocontainment systems.

Remediation techniques for elimination of heavy metal pollutants from soil: A review

Contaminated soil containing toxic metals and metalloids is found everywhere globally. As a consequence of adsorption and precipitation reactions, metals are comparatively immobile in subsurface systems. Hence remediation techniques in such contaminated sites have targeted the solid phase sources of metals such as sludges, debris, contaminated soils, or wastes. Over the last three decades, the accumulation of these toxic substances inside the soil has increased dramatically, putting the ecosystem and human health at risk. Pollution of heavy metal have posed severe impacts on human, and it affects the environment in different ways, resulting in industrial anger in many countries. Various procedures, including chemical, biological, physical, and integrated approaches, have been adopted to get rid of this type of pollution. Expenditure, timekeeping, planning challenges, and state-of-the-art gadget involvement are some drawbacks that need to be properly handled. Recently in situ metal immobilization, plant restoration, and biological methods have changed the dynamics and are considered the best solution for removing metals from soil. This review paper critically evaluates and analyzes the numerous approaches for preparing heavy metal-free soil by adopting different soil remediation methods.

Bioremediation of Endocrine Disrupting Chemicals- Advancements and Challenges

Endocrine Disrupting Chemicals (EDCs), major group of recalcitrant compounds, poses a serious threat to the health and future of millions of human beings, and other flora and fauna for years to come. A close analysis of various xenobiotics undermines the fact that EDC is structurally diverse chemical compounds generated as a part of anthropogenic advancements as well as part of their degradation. Regardless of such structural diversity, EDC is common in their ultimate drastic effect of impeding the proper functioning of the endocrinal system, basic physiologic systems, resulting in deregulated growth, malformations, and cancerous outcomes in animals as well as humans. The current review outlines an overview of various EDCs, their toxic effects on the ecosystem and its inhabitants. Conventional remediation methods such as physico-chemical methods and enzymatic approaches have been put into action as some form of mitigation measures. However, the last decade has seen the hunt for newer technologies and methodologies at an accelerated pace. Genetically engineered microbial degradation, gene editing strategies, metabolic and protein engineering, and in-silico predictive approaches - modern day's additions to our armamentarium in combating the EDCs are addressed. These additions have greater acceptance socially with lesser dissonance owing to reduced toxic by-products, lower health trepidations, better degradation, and ultimately the prevention of bioaccumulation. The positive impact of such new approaches on controlling the menace of EDCs has been outlaid. This review will shed light on sources of EDCs, their impact, significance, and the different remediation and bioremediation approaches, with a special emphasis on the recent trends and perspectives in using sustainable approaches for bioremediation of EDCs. Strict regulations to prevent the release of estrogenic chemicals to the ecosystem, adoption of combinatorial methods to remove EDC and prevalent use of bioremediation techniques should be followed in all future endeavors to combat EDC pollution. Moreover, the proper development, growth and functioning of future living forms relies on their non-exposure to EDCs, thus remediation of such chemicals present even in nano-concentrations should be addressed gravely.

Biodegradation of p-nitrophenol by a member of the genus Brachybacterium, isolated from the river Ganges

A p-nitrophenol (PNP) degrading halotolerant, Gram-variable bacterial strain designated as DNPG3, was isolated from a water sample collected from the river Ganges in Hooghly, West Bengal (WB), India, by enrichment culture technique. Based on 16S rRNA gene sequence analysis (carried out at EzTaxon server and Ribosomal data base project site), the strain DNPG3 was identified as Brachybacterium sp., with B. zhongshanense strain JBT (97.08% identity) as it is nearest phylogenetic relative. The strain could tolerate up to 3 mM of PNP, while the optimal growth for the strain was recorded as 0.25 mM. The strain could carry out biodegradation of PNP with concomitant release of nitrite and p-benzoquinone (PBQ) was detected as a hydrolysis product. Under the catabolic condition, it could carry out 36% biodegradation of PNP within 144 h, while, under co-metabolic condition (with glucose), 100% biodegradation was achieved within 48 h at 30 °C. Calcium alginate bead-based cell immobilization studies (of the strain DNPG3) indicated complete biodegradation of PNP (under catabolic condition) within 26 h. This is the first report of PNP biodegradation by any representative strain of the genus Brachybacterium. The study definitely indicated that Brachybacterium sp. strain DNPG3 has biotechnological potential and the strain may be a suitable candidate for developing clean, green, eco-friendly, cost-effective bioremediation processes towards effective removal of PNP from the contaminated sites.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03263-7.

Recent Strategies for Bioremediation of Emerging Pollutants: A Review for a Green and Sustainable Environment

Environmental pollution brought on by xenobiotics and other related recalcitrant compounds have recently been identified as a major risk to both human health and the natural environment. Due to their toxicity and non-biodegradability, a wide range of pollutants, such as heavy metals, polychlorinated biphenyls, plastics, and various agrochemicals are present in the environment. Bioremediation is an effective cleaning technique for removing toxic waste from polluted environments that is gaining popularity. Various microorganisms, including aerobes and anaerobes, are used in bioremediation to treat contaminated sites. Microorganisms play a major role in bioremediation, given that it is a process in which hazardous wastes and pollutants are eliminated, degraded, detoxified, and immobilized. Pollutants are degraded and converted to less toxic forms, which is a primary goal of bioremediation. Ex situ or in situ bioremediation can be used, depending on a variety of factors, such as cost, pollutant types, and concentration. As a result, a suitable bioremediation method has been chosen. This review focuses on the most recent developments in bioremediation techniques, how microorganisms break down different pollutants, and what the future holds for bioremediation in order to reduce the amount of pollution in the world.

A sustainable Decision Support System for soil bioremediation of toluene incorporating UN sustainable development goals

Decision Support System (DSS) is a novel approach for smart, sustainable controlling of environmental phenomena and purification processes. Toluene is one of the most widely used petroleum products, which adversely impacts on human health. In this study, Fusarium Solani fungi are utilized as the engine of the toluene bioremediation procedure for the monitoring part of DSS. Experiments are optimized by Central Composite Design (CCD) - Response Surface Methodology (RSM), and the behavior of the mentioned fungi is estimated by M5 Pruned model tree (M5P), Gaussian Processes (GP), and Sequential Minimal Optimization (SMOreg) algorithms as the prediction section of DSS. Finally, the control stage of DSS is provided by integrated Petri Net modeling and Failure Modes and Effects Analysis (FMEA). The findings showed that Aeration Intensity (AI) and Fungi load/Biological Waste (F/BW) are the most influential mechanical and biological factors, with P-value of 0.0001 and 0.0003, respectively. Likewise, the optimal values of main mechanical parameters include AI, and the space between pipes (S) are equal to 13.76 m³/h and 15.99 cm, respectively. Also, the optimum conditions of biological features containing F/BW and pH are 0.001 mg/g and 7.56. In accordance with the kinetic study, bioremediation of toluene by Fusarium Solani is done based on a first-order reaction with a 0.034 s-1 kinetic coefficient. Finally, the machine learning practices showed that the GP (R2 = 0.98) and M5P (R2 = 0.94) have the most precision for predicting Removal Percentage (RP) for mechanical and biological factors, respectively. At the end of the present research, it is found that by controlling seven possible risk factors in bioremediation operation through the FMEA- Petri Net technique, efficiency of the process can be adjusted to optimum value.

Interaction and spatio-taxonomic patterns of the soil microbiome around oil production wells impacted by petroleum hydrocarbons

Numerous onshore oil production wells currently exist, and the petroleum hydrocarbon contamination of the surrounding soil caused by oil production wells is not well understood. Moreover, the impact of the distribution of the total petroleum hydrocarbons (TPH) in the soil on the microbiota requires further investigation. Accordingly, in this study, the distribution of petroleum hydrocarbons in the soils around oil production wells was investigated, and their alteration of the microbiota was revealed. The results revealed that in the horizontal direction, the heavily TPH-contaminated soils were mainly distributed within a circle with a radius of 200 cm centered on the oil production well; and in the vertical direction, the heavily TPH-contaminated soils were distributed within the 0-50 cm soil layer. A significant positive correlation was found between the microbial abundance and the TPH concentration in the soil with relatively low total carbon contents. Heavy TPH contamination (TPH concentration of >3000 mg/kg) significantly reduced the microbial diversity and altered the microbiota compared with the light TPH contamination (TPH concentration of around 1000 mg/kg). In the heavily TPH-contaminated soils, the relative abundances of the Proteobacteria and Bacteroides increased significantly; the network complexity among the soil microorganisms decreased; and the co-occurrence patterns were altered. In summary, the results of this study have reference value in the remediation of soils around oil production wells and provide guidance for the construction of microbial remediation systems for petroleum contamination.

Cloning, expression and characterization of PURase gene from Pseudomonas sp. AKS31

Polyurethane (PUR) is a soil and aquatic contaminant throughout the world. Towards bioremediation, in a previous study, a soil bacterium, Pseudomonas sp. AKS31, capable of efficiently degrading PUR was isolated. Polyurethanase (PURase) enzyme is capable of cleaving the ester bond of PUR and is considered as a key regulator of PUR biodegradation. Hence, for a high yield, easy purification, and further characterization, the aim of this study was to clone and overexpress the PURase gene of this isolate. The current study also investigated structural aspects of this enzyme through predictive bioinformatics analyses. In this context, the PURase gene of the isolate was cloned and expressed in E. coli using pET28(a)⁺ vector. The obtained recombinant protein was found insoluble. Therefore, first, the protein was made soluble with urea and purified using nickel-NTA beads. The purified enzyme exhibited substantial activities when tested on the LA-PUR plate. Bioinformatics-based analysis of the protein revealed the presence of a lipase serine active site and indicated that this PURase belongs to the Family 1.3 lipase. Hence, the present study shows that active PURase can be produced in large quantities using a prokaryotic expression system and thus, provides an effective strategy for in-vitro PUR-degradation.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Lessons From Insect Fungiculture: From Microbial Ecology to Plastics Degradation

Anthropogenic activities have extensively transformed the biosphere by extracting and disposing of resources, crossing boundaries of planetary threat while causing a global crisis of waste overload. Despite fundamental differences regarding structure and recalcitrance, lignocellulose and plastic polymers share physical-chemical properties to some extent, that include carbon skeletons with similar chemical bonds, hydrophobic properties, amorphous and crystalline regions. Microbial strategies for metabolizing recalcitrant polymers have been selected and optimized through evolution, thus understanding natural processes for lignocellulose modification could aid the challenge of dealing with the recalcitrant human-made polymers spread worldwide. We propose to look for inspiration in the charismatic fungal-growing insects to understand multipartite degradation of plant polymers. Independently evolved in diverse insect lineages, fungiculture embraces passive or active fungal cultivation for food, protection, and structural purposes. We consider there is much to learn from these symbioses, in special from the community-level degradation of recalcitrant biomass and defensive metabolites. Microbial plant-degrading systems at the core of insect fungicultures could be promising candidates for degrading synthetic plastics. Here, we first compare the degradation of lignocellulose and plastic polymers, with emphasis in the overlapping microbial players and enzymatic activities between these processes. Second, we review the literature on diverse insect fungiculture systems, focusing on features that, while supporting insects' ecology and evolution, could also be applied in biotechnological processes. Third, taking lessons from these microbial communities, we suggest multidisciplinary strategies to identify microbial degraders, degrading enzymes and pathways, as well as microbial interactions and interdependencies. Spanning from multiomics to spectroscopy, microscopy, stable isotopes probing, enrichment microcosmos, and synthetic communities, these strategies would allow for a systemic understanding of the fungiculture ecology, driving to application possibilities. Detailing how the metabolic landscape is entangled to achieve ecological success could inspire sustainable efforts for mitigating the current environmental crisis.

Emerging Pollutants in Wastewater, Advanced Oxidation Processes as an Alternative Treatment and Perspectives

Emerging pollutants are present in wastewaters treated by conventional processes. Due to water cycle interactions, these contaminants have been reported in groundwater, surface water, and drinking waters. Since conventional processes cannot guarantee their removal or biotransformation, it is necessary to study processes that comply with complete elimination. The current literature review was conducted to describe and provide an overview of the available information about the most significant groups of emerging pollutants that could potentially be found in the wastewater and the environment. In addition, it describes the main entry and distribution pathways of emerging contaminants into the environment through the water and wastewater cycle, as well as some of the potential effects they may cause to flora, fauna, and humans. Relevant information on the SARS-CoV-2 virus and its potential spread through wastewater is included. Furthermore, it also outlines some of the Advanced Oxidation Processes (AOPs) used for the total or partial emerging pollutants removal, emphasizing the reaction mechanisms and process parameters that need to be considered. As well, some biological processes that, although slow, are effective for the biotransformation of some emerging contaminants and can be used in combination with advanced oxidation processes.

Perspectives on Microbial Electron Transfer Networks for Environmental Biotechnology

The overlap of microbiology and electrochemistry provides plenty of opportunities for a deeper understanding of the redox biogeochemical cycle of natural-abundant elements (like iron, nitrogen, and sulfur) on Earth. The electroactive microorganisms (EAMs) mediate electron flows outward the cytomembrane via diverse pathways like multiheme cytochromes, bridging an electronic connection between abiotic and biotic reactions. On an environmental level, decades of research on EAMs and the derived subject termed “electromicrobiology” provide a rich collection of multidisciplinary knowledge and establish various bioelectrochemical designs for the development of environmental biotechnology. Recent advances suggest that EAMs actually make greater differences on a larger scale, and the metabolism of microbial community and ecological interactions between microbes play a great role in bioremediation processes. In this perspective, we propose the concept of microbial electron transfer network (METN) that demonstrates the “species-to-species” interactions further and discuss several key questions ranging from cellular modification to microbiome construction. Future research directions including metabolic flux regulation and microbes–materials interactions are also highlighted to advance understanding of METN for the development of next-generation environmental biotechnology.

Emerging frontiers in microbe-mediated pesticide remediation: Unveiling role of omics and In silico approaches in engineered environment

The overuse of pesticides for augmenting agriculture productivity always comes at the cost of environment, biodiversity, and human health and has put the land, water, and environmental footprints under severe threat throughout the globe. Underpinning and maximizing the microbiome functions in pesticide-contaminated environments has become a prerequisite for a sustainable environment and resilient agriculture. It is imperative to elucidate the metabolic network of the microbial communities and environmental variables at the contaminated site to predict the best strategy for remediation and soil microbe-pesticide interactions. High throughput next-generation sequencing and in silico analysis allow us to identify and discern the members and characteristics of core microbiomes at the contaminated site. Integration of modern high throughput multi-omics investigations and informatics pipelines provide novel approaches and pathways to capitalize on the core microbiomes for enhancing environmental functioning and mitigation. The role of eco-genomics tools in visualising the microbial network, taxonomy, functional potential, and environmental variables in contaminated habitats is discussed in this review. The integrated role of the potential microbe identification as individual or consortia, mechanistic approach for pesticide degradation, identification of responsible enzymes/genes, and in silico approach is emphasized for the prospects of the area.

Synthetic Biology: A New Era in Hydrocarbon Bioremediation

Crude oil is a viscous dark liquid resource composed by a mix of hydrocarbons which, after refining, is used for the elaboration of distinct products. A major concern is that many petroleum components are highly toxic due to their teratogenic, hemotoxic, and carcinogenic effects, becoming an environmental concern on a global scale, which must be solved through innovative, efficient, and sustainable techniques. One of the most widely used procedures to totally degrade contaminants are biological methods such as bioremediation. Synthetic biology is a scientific field based on biology and engineering principles, with the purpose of redesigning and restructuring microorganisms to optimize or create new biological systems with enhanced features. The use of this discipline offers improvement of bioremediation processes. This article will review some of the techniques that use synthetic biology as a platform to be used in the area of hydrocarbon bioremediation.

Influence of cerium oxide nanoparticles on dairy effluent nitrate and phosphate bioremediation

This study investigated, for the first time, the role of cerium oxide nanoparticles (CeO2 NPs) on dairy effluent nitrate and phosphate bioremediation using different inoculum sources. Two inoculum sources (wastewater and sludge) were obtained from the dairy wastewater treatment plant unit. A culture was prepared to be tested in the treatment of nitrate and phosphate effluent, and the role of CeO2 NPs was checked to be completely efficient after 5 days of incubation. The reduction efficiency of nitrate using sludge as inoculum source was improved up to 89.01% and 68.12% for phosphate compared to control. In the case of using wastewater as an inoculum source, the nitrate reduction was improved up to 83.30% and 87.75% for phosphate compared to control. The bacterial richness showed a significant variance (higher richness) between control and other samples. The optimal concentration of CeO2 NPs for inoculum richness and nitrate and phosphate reduction was (sludge: 1 × 10-10 ppm) and (wastewater: 1 × 10-12 ppm). The results revealed that CeO2 NPs could enhance the microbial growth of different inoculum sources that have a key role in dairy effluent nitrate and phosphate bioremediation.

Bibliometric analysis of microbial sulfonamide degradation: Development, hotspots and trend directions

Microbial sulfonamide degradation (MSD) is an efficient and safe treatment in both natural and engineered ecosystems. In order to systematically understand the research status and frontier trends of MSD, this study employed CiteSpace to conduct a bibliometric analysis of data from the Web of Science (WoS) and the China National Knowledge Infrastructure (CNKI) published from 2000 to 2021. During this time, China, Germany, Spain, the United States and Australia played leading roles by producing numerous high impact publications, while the Chinese Academy of Sciences was the leading research institution in this interdisciplinary research category. The Chemosphere was the top journal in terms of the number of citations. MSD research has gradually progressed from basic laboratory-based experiments to more complex environmental microbial communities and finally to deeper research on molecular mechanisms and engineering applications. Although multi-omics and synthetic community are the key techniques in the frontier research, they are also the current challenges in this field. A summary of published articles shows that Proteobacteria, Gammaproteobacteria, Burkholderiales and Alcaligenaceae are the most frequently observed MSD phylum, class, order and family, respectively, while Bacillus, Pseudomonas and Achromobacter are the top three MSD genera. To our knowledge, this study is the first to investigate the development and current challenges of MSD research, put forward future perspective, and form a relatively complete list of sulfonamide-degrading microorganisms for reference.

Exploring the role of microbial biofilm for industrial effluents treatment

Biofilm formation on biotic or abiotic surfaces is caused by microbial cells of a single or heterogeneous species. Biofilm protects microbes from stressful environmental conditions, toxic action of chemicals, and antimicrobial substances. Quorum sensing (QS) is the generation of autoinducers (AIs) by bacteria in a biofilm to communicate with one other. QS is responsible for the growth of biofilm, synthesis of exopolysaccharides (EPS), and bioremediation of environmental pollutants. EPS is used for wastewater treatment due to its three-dimensional matrix which is composed of proteins, polysaccharides, humic-like substances, and nucleic acids. Autoinducers mediate significantly the degradation of environmental pollutants. Acyl-homoserine lactone (AHL) producing bacteria as well as quorum quenching enzyme or bacteria can effectively improve the performance of wastewater treatment. Biofilms-based reactors due to their economic and ecofriendly nature are used for the treatment of industrial wastewaters. Electrodes coated with electro-active biofilm (EAB) which are obtained from sewage sludge, activated sludge, or industrial and domestic effluents are getting popularity in bioremediation. Microbial fuel cells are involved in wastewater treatment and production of energy from wastewater. Synthetic biological systems such as genome editing by CRISPR-Cas can be used for the advanced bioremediation process through modification of metabolic pathways in quorum sensing within microbial communities. This narrative review discusses the impacts of QS regulatory approaches on biofilm formation, extracellular polymeric substance synthesis, and role of microbial community in bioremediation of pollutants from industrial effluents.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Genetically engineered microbial remediation of soils co-contaminated by heavy metals and polycyclic aromatic hydrocarbons: Advances and ecological risk assessment

Soils contaminated with heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have been becoming a worldwide concerned environmental problem because of threatening public healthy via food chain exposure. Thus soils polluted by HMs and PAHs need to be remediated urgently. Physical and chemical remediation methods usually have some disadvantages, e.g., cost-expensiveness and incomplete removal, easily causing secondary pollution, which are hence not environmental-friendly. Conventional microbial approaches are mostly used to treat a single contaminant in soils and lack high efficiency and specificity for combined contaminants. Genetically engineered microorganisms (GEMs) have emerged as a desired requirement of higher bioremediation efficiency for soils polluted with HMs and PAHs and environmental sustainability, which can provide a more eco-friendly and cost-effective strategy in comparison with some conventional techniques. This review comments the recent advances about successful bioremediation techniques and approaches for soil contaminated with HMs and/or PAHs by GEMs, and discusses some challenges in the simultaneous removal of HMs and PAHs from soil by designing multi-functional genetic engineering microorganisms (MFGEMs), such as improvement of higher efficiency, strict environmental conditions, and possible ecological risks. Also, the modern biotechnological techniques and approaches in improving the ability of microbial enzymes to effectively degrade combined contaminants at a faster rate are introduced, such as reasonable gene editing, metabolic pathway modification, and protoplast fusion. Although MFGEMs are more potent than the native microbes and can quickly adapt to combined contaminants in soils, the ecological risk of MFGEMs needs to be evaluated under a regulatory, safety, or costs benefit-driving system in a way of stratified regulation. Nevertheless, the innovation of genetic engineering to produce MFGEMs should be inspired for the welfare of successful bioremediation for soils contaminated with HMs and PAHs but it must be supervised by the public, authorities, and laws.

Biotechnological applications of marine bacteria in bioremediation of environments polluted with hydrocarbons and plastics

Marine ecosystems are some of the most adverse environments on Earth and contain a considerable portion of the global bacterial population, and some of these bacterial species play pivotal roles in several biogeochemical cycles. Marine bacteria have developed different molecular mechanisms to address fluctuating environmental conditions, such as changes in nutrient availability, salinity, temperature, pH, and pressure, making them attractive for use in diverse biotechnology applications. Although more than 99% of marine bacteria cannot be cultivated with traditional microbiological techniques, several species have been successfully isolated and grown in the laboratory, facilitating investigations of their biotechnological potential. Some of these applications may contribute to addressing some current global problems, such as environmental contamination by hydrocarbons and synthetic plastics. In this review, we first summarize and analyze recently published information about marine bacterial diversity. Then, we discuss new literature regarding the isolation and characterization of marine bacterial strains able to degrade hydrocarbons and petroleum-based plastics, and species able to produce biosurfactants. We also describe some current limitations for the implementation of these biotechnological tools, but also we suggest some strategies that may contribute to overcoming them. KEY POINTS: • Marine bacteria have a great metabolic capacity to degrade hydrocarbons in harsh conditions. • Marine environments are an important source of new bacterial plastic-degrading enzymes. • Secondary metabolites from marine bacteria have diverse potential applications in biotechnology.

Would that it were so simple: Interactions between multiple traits undermine classical single-trait-based predictions of microbial community function and evolution

Understanding how microbial traits affect the evolution and functioning of microbial communities is fundamental for improving the management of harmful microorganisms, while promoting those that are beneficial. Decades of evolutionary ecology research has focused on examining microbial cooperation, diversity, productivity and virulence but with one crucial limitation. The traits under consideration, such as public good production and resistance to antibiotics or predation, are often assumed to act in isolation. Yet, in reality, multiple traits frequently interact, which can lead to unexpected and undesired outcomes for the health of macroorganisms and ecosystem functioning. This is because many predictions generated in a single-trait context aimed at promoting diversity, reducing virulence or controlling antibiotic resistance can fail for systems where multiple traits interact. Here, we provide a much needed discussion and synthesis of the most recent research to reveal the widespread and diverse nature of multi-trait interactions and their consequences for predicting and controlling microbial community dynamics. Importantly, we argue that synthetic microbial communities and multi-trait mathematical models are powerful tools for managing the beneficial and detrimental impacts of microbial communities, such that past mistakes, like those made regarding the stewardship of antimicrobials, are not repeated.