A Sensitive, Highly Specific Novel Isothermal Amplification Method Based on Single-Nucleotide Polymorphism for the Rapid Detection of Salmonella Pullorum

Two-Stage Mixed-Dye-Based Isothermal Amplification with Ribonuclease-Cleavable Enhanced Probes for Dual-Visualization Detection of SARS-CoV-2 Variants of Interest

Rapid and visual detection of SARS-CoV-2 variants is vital for timely assessment of variant transmission in resource-limited settings. Here, a closed-tube, two-stage, mixed-dye-based isothermal amplification method with ribonuclease-cleavable enhanced probes (REP), termed REP-TMAP, for dual-visualization detection of SARS-CoV-2 variants including JN.1, BA.2, BA.4/5, and Delta is introduced. The first stage of REP-TMAP is reverse transcription recombinase polymerase amplification and the second stage is dual-visualization detection synergistically mediated by the REP and the mixed dyes of cresol red and hydroxy naphthol blue. In REP-TMAP reaction, the color change under ambient light indicates SARS-CoV-2 infection, while the fluorescence change under blue light excitation specifies variant type. On detecting transcribed RNA of SARS-CoV-2 spike gene, this assay is rapid (within 40 min), highly sensitive (10-200 copies per reaction), and highly specific (identification of single-base mutations). Furthermore, the assay has been clinically validated to accurately detect JN.1, BA.2, and BA.4/5 variants from 102 human oropharyngeal swabs. The proposed assay therefore holds great potentials to provide a rapid, dual-visualization, sensitive, specific, point-of-care detection of SARS-CoV-2 variants and beyond.

A novel high sensitive, specificity duplex enzyme-activated differentiating probes PCR method for the SNP detection and differentiation of MS-H vaccine strains from wild-type Mycoplasma synoviae strains

Mycoplasma synoviae (MS) is a contagious pathogen that poses a significant threat to the poultry industry. Detection plays an important role in the prevention and control of MS, particularly in differentiating between wild-type MS and live attenuated vaccine strains for vaccination selection and culling of animals with wild-type only. The live attenuated ts+ vaccine strain MS-H is recognized as the most effective and widely used vaccine. In this study, we have developed a method called double enzyme-activated differentiation probes PCR (DEA-probes PCR) for the differentiation of MS-H vaccine strain from wild-type strain by targeting the single nucleotide polymorphism (SNP) of the 367th nucleotide in the Obg gene sequence. We developed 2 modified probes with the ribonucleotide insert. When the probe perfectly complements with the target, the ribonuclease H2 (RNase H2) will cleave the ribonucleotide, resulting in the generation of fluorescent signal. With a detection limit of 5.8 copies/µL, the DEA-probes PCR method demonstrates 100% specificity in distinguishing wild-type MS from MS-H strains in 1 h. The method demonstrated great performance in real application of 100 superior palate cleft swab samples from chickens in poultry farms. Twenty-eight samples were detected as MS positive, consistent with the results of the Chinese industry standard method. Additionally, our method was able to distinguish 19 wild-type MS strains from 9 MS-H vaccine strains. The DEA-probes PCR method is rapid, specific and sensitive for SNP detection, overcoming the misidentification in MS detection and differentiation. It can be also applied to the differentiation of infected from vaccinated animals (DIVA) for other pathogens.

A point-of-care platform for hair loss-related single nucleotide polymorphism genotyping

Rapid genotyping of single nucleotide polymorphism (SNP) is crucial for prognostics and disease management, enabling more rapid therapy selection and treatment determination. Here, we introduce a point-of-care platform for hair loss-related SNP genotyping based on allele-specific loop-mediated isothermal amplification (AS-LAMP) combined with naked-eye visualization. The specificity of the AS-LAMP assay was significantly enhanced by using mismatched allele-specific primers. AS-LAMP reaction and Schiff's reagent-based colorimetric detection were successfully performed using a thermoplastic genotyping chip. This strategy also showed potential for determining homozygotes and heterozygotes in a target sample. To assess SNP genotyping capacity, the genotyping chip was fabricated to visually detect rs6152 polymorphism of an androgen receptor gene associated with genetically induced hair loss. The genotyping platform rapidly identified the SNP within 40 min, and the detection limit was as low as 1 pg/μL of the target DNA contained in human serum. The introduced strategy showed high specificity and stability in discriminating low-abundance mutations, making it suitable as a portable and affordable point-of-care platform for rapid and accurate SNP discrimination applicable for bedside detection.

Generic Platform for the Multiplexed Targeted Electrochemical Detection of Osteoporosis-Associated Single Nucleotide Polymorphisms Using Recombinase Polymerase Solid-Phase Primer Elongation and Ferrocene-Modified Nucleoside Triphosphates

Osteoporosis is a multifactorial disease influenced by genetic and environmental factors, which contributes to an increased risk of bone fracture, but early diagnosis of this disease cannot be achieved using current techniques. We describe a generic platform for the targeted electrochemical genotyping of SNPs identified by genome-wide association studies to be associated with a genetic predisposition to osteoporosis. The platform exploits isothermal solid-phase primer elongation with ferrocene-labeled nucleoside triphosphates. Thiolated reverse primers designed for each SNP were immobilized on individual gold electrodes of an array. These primers are designed to hybridize to the SNP site at their 3'OH terminal, and primer elongation occurs only where there is 100% complementarity, facilitating the identification and heterozygosity of each SNP under interrogation. The platform was applied to real blood samples, which were thermally lysed and directly used without the need for DNA extraction or purification. The results were validated using Taqman SNP genotyping assays and Sanger sequencing. The assay is complete in just 15 min with a total cost of 0.3€ per electrode. The platform is completely generic and has immense potential for deployment at the point of need in an automated device for targeted SNP genotyping with the only required end-user intervention being sample addition.

A duplex tetra-primer ARMS-PCR assay to discriminate three species of the Schistosoma haematobium group: Schistosoma curassoni, S. bovis, S. haematobium and their hybrids

BACKGROUND

The use of applications involving single nucleotide polymorphisms (SNPs) has greatly increased since the beginning of the 2000s, with the number of associated techniques expanding rapidly in the field of molecular research. Tetra-primer amplification refractory mutation system-PCR (T-ARMS-PCR) is one such technique involving SNP genotyping. It has the advantage of amplifying multiple alleles in a single reaction with the inclusion of an internal molecular control. We report here the development of a rapid, reliable and cost-effective duplex T-ARMS-PCR assay to distinguish between three Schistosoma species, namely Schistosoma haematobium (human parasite), Schistosoma bovis and Schistosoma curassoni (animal parasites), and their hybrids. This technique will facilitate studies of population genetics and the evolution of introgression events.

METHODS

During the development of the technique we focused on one of the five inter-species internal transcribed spacer (ITS) SNPs and one of the inter-species 18S SNPs which, when combined, discriminate between all three Schistosoma species and their hybrid forms. We designed T-ARMS-PCR primers to amplify amplicons of specific lengths for each species, which in turn can then be visualized on an electrophoresis gel. This was further tested using laboratory and field-collected adult worms and field-collected larval stages (miracidia) from Spain, Egypt, Mali, Senegal and Ivory Coast. The combined duplex T-ARMS-PCR and ITS + 18S primer set was then used to differentiate the three species in a single reaction.

RESULTS

The T-ARMS-PCR assay was able to detect DNA from both species being analysed at the maximum and minimum levels in the DNA ratios (95/5) tested. The duplex T-ARMS-PCR assay was also able to detect all hybrids tested and was validated by sequencing the ITS and the 18S amplicons of 148 of the field samples included in the study.

CONCLUSIONS

The duplex tetra-primer ARMS-PCR assay described here can be applied to differentiate between Schistosoma species and their hybrid forms that infect humans and animals, thereby providing a method to investigate the epidemiology of these species in endemic areas. The addition of several markers in a single reaction saves considerable time and is of long-standing interest for investigating genetic populations.

Development of a rapid diagnostic test based on loop-mediated isothermal amplification to identify the most frequent non-typhoidal Salmonella serovars from culture

Identification of Salmonella serovars is performed by conventional seroagglutination or sequencing. These methods are labor-intensive and require technical experience. An easy-to-perform assay allowing the timely identification of the most common non-typhoidal serovars (NTS) is needed. In this study, a molecular assay based on loop-mediated isothermal amplification (LAMP) targeting specific gene sequences of Salmonella Enteritidis, S. Typhimurium, S. Infantis, S. Derby, and S. Choleraesuis has been developed for rapid serovar identification from cultured colonies. A total of 318 Salmonella strains and 25 isolates of other Enterobacterales species that served as negative controls were analyzed. All S. Enteritidis (n = 40), S. Infantis (n = 27), and S. Choleraesuis (n = 11) strains were correctly identified. Seven out of 104 S. Typhimurium and 10 out of 38 S. Derby strains missed a positive signal. Cross-reactions of the gene targets were only rarely observed and restricted to the S. Typhimurium primer set (5 false-positives). Sensitivity and specificity of the assay compared to seroagglutination were as follows: 100% and 100% for S. Enteritidis, 93.3% and 97.7% for S. Typhimurium, 100% and 100% for S. Infantis, 73.7% and 100% for S. Derby, and 100% and 100% for S. Choleraesuis, respectively. With results available in just a few minutes of hands-on time and a test run time of 20 min, the LAMP assay developed here may be a useful tool for the rapid identification of common Salmonella NTS in daily routine diagnostics.

Accelerated loop-mediated isothermal amplification method for the rapid detection of Streptococcus suis serotypes 2 and 14 based on single nucleotide polymorphisms

Streptococcus suis serotypes 2 and 14 are the most prevalent zoonotic strains. The establishment of a sensitive and extremely accurate method for point-of-care testing for Streptococcus suis serotype 2 and 14 strains is highly desirable. In this study, a loop primer probe-introduced loop-mediated isothermal amplification assay was developed to differentiate Streptococcus suis serotypes 2 and 14 based on SNP (single nucleotide polymorphism). The specific fluorescent probes were designed for the SNP site specific for serotype 2 and 14 Streptococcus suis cpsK genes, and the loop primer probe-introduced loop-mediated isothermal amplification (LAMP) assay was developed using the specific cleavage properties of the RNase H2 enzyme. Rapid and efficient LAMP assays were realized through the use of loop forward primers and stem forward primers. The results showed that the amplification reaction can be performed efficiently at 59°C. The results can be real-time detected or judged using a smartphone and a 3D-printed visualization cassette. The sensitivity of the LAMP assay can reach 18.4 CFU within 40 minutes. The detection rate of the assay system was evaluated using 19 clinical samples with suspected Streptococcus suis infection, and the detection rate was consistent with the sequencing method, suggesting that the test is highly practical. The LAMP assay for Streptococcus suis serotypes 2 and 14 established in this study has strong specificity, high sensitivity, and simple operation, while the reaction can be performed at an isothermal temperature and is not dependent on complex instruments or professional operators, making it suitable for field testing.

Genome-Wide Searching Single Nucleotide-Polymorphisms (SNPs) and SNPs-Targeting a Multiplex Primer for Identification of Common Salmonella Serotypes

A rapid and high-quality single-nucleotide polymorphisms (SNPs)-based method was developed to improve detection and reduce salmonellosis burden. In this study, whole-genome sequence (WGS) was used to investigate SNPs, the most common genetic marker for identifying bacteria. SNP-sites encompassing 15 sets of primers (666–863 bp) were selected and used to amplify the target Salmonella serovar strains, and the amplified products were sequenced. The prevalent Salmonella enterica subspecies enterica serovars, including Typhimurium; Enteritidis, Agona, enterica, Typhi, and Abony, were amplified and sequenced. The amplified sequences of six Salmonella serovars with 15 sets of SNP-sites encompassing primers were aligned, explored SNPs, and SNPs-carrying primers (23 sets) were designed to develop a multiplex PCR marker (m-PCR). Each primer exists in at least two SNPs bases at the 3′ end of each primer, such as one was wild, and another was a mismatched base by transition or transversion mutation. Thus, twenty-three sets of SNP primers (242–670 bp), including 13 genes (SBG, dedA, yacG, mrcB, mesJ, metN, rihA/B, modA, hutG, yehX, ybiY, moeB, and sopA), were developed for PCR confirmation of target Salmonella serovar strains. Finally, the SNPs in four genes, including fliA gene (S. Enteritidis), modA (S. Agona and S. enterica), sopA (S. Abony), and mrcB (S. Typhimurium and S. Typhi), were used for detection markers of six target Salmonella serotypes. We developed an m-PCR primer set in which Salmonella serovars were detected in a single reaction. Nevertheless, m-PCR was validated with 21 Salmonella isolates (at least one isolate was taken from one positive animal fecal, and n = 6 reference Salmonella strains) and non-Salmonella bacteria isolates. The SNP-based m-PCR method would identify prevalent Salmonella serotypes, minimize the infection, and control outbreaks.

Comparison of colourimetric loop-mediated isothermal amplification (LAMP), PCR and high-resolution melt curve analysis and culture based diagnostic assays in the detection of three salmonella serotypes in poultry

The accuracy of two molecular tests, PCR and loop-mediated isothermal amplification (LAMP) assay were compared with bacterial culture in detection of salmonella in poultry clinical samples. The icIR family transcriptional regulator gene was targeted and out of 56 clinical specimens, 20 poultry field isolates were found positive for salmonella. Along with human isolates, reference strains of three different serovars, Salmonella Enteritidis (S. Enteritidis), S. Typhimurium and S. Infantis, were also tested. Eight different but genetically closely related bacterial genera (Klebsiella, Pseudomonas, Enterobacter, Campylobacter, Staphylococcus, Streptococcus, Escherichia and Pasteurella) were also used to evaluate the specificity of assay. The LAMP assay showed 80.8% sensitivity (95% CI, 0.66-0.95) and 100% specificity (95% CI, 0.71-1.00) when compared with microbiological culture and PCR, both with 100% sensitivity (95% CI, 0.87-1.00) and 100% specificity (95% CI, 0.71-1.00). High-resolution melt (HRM) curve analysis following PCR was able to differentiate between salmonella isolates based on their melting points, and all specimens were genotyped in three distinct HRM curve profiles. Each normalised melt curve profile represented one salmonella serotype and differences between the three melt profiles were correlated with nucleotide variations in the target gene sequences which demonstrated high discriminatory power of this technique. The colourimetric LAMP assay provided an alternative detection method capable of being used in the field and showed analytical sensitivity for detection of 1 pg of salmonella DNA per reaction. The advantages and disadvantages of each test in detection of salmonella are discussed.

A Novel, Cleaved Probe-Based Reverse Transcription Loop-Mediated Isothermal Amplification Method for Specific and Sensitive Detection of Porcine Deltacoronavirus

Porcine deltacoronavirus (PDCoV) causes watery diarrhea, vomiting, and 30–40% mortality in newborn piglets. A simple, rapid, and sensitive method for PDCoV detection is valuable in its surveillance and control. Here, we developed a novel, cleaved probe-based reverse transcription loop-mediated isothermal amplification (CP-RT-LAMP) method for PDCoV detection. A cleaved probe with a ribonucleotide insertion that targeted the N gene of PDCoV was designed. During the reaction, the enzyme ribonuclease H2 is activated only when the cleaved probe is perfectly complementary to the template, leading to the hydrolytic release of a quencher moiety and signal output. This method can be easily used on a real-time fluorescence quantitative equipment or an on-site isothermal instrument combined with a smartphone. The specificity assay showed no cross-reactivity with other porcine enteric pathogens. This method had a detection limit of 25 copies/μL, suggesting comparable sensitivity with reverse transcription quantitative PCR (RT-qPCR). In detecting 100 clinical samples (48 fecal swab specimens and 52 intestinal specimens), the detection rate of the CP-RT-LAMP method (26%) was higher than that of RT-qPCR (17%). Thus, it is a highly specific and sensitive diagnostic method for PDCoV, with a great application potential for monitoring PDCoV in the laboratory or point-of-care testing in the field.

Development of a Cleaved Probe-Based Loop-Mediated Isothermal Amplification Assay for Rapid Detection of African Swine Fever Virus

African Swine Fever (ASF), caused by African swine fever virus (ASFV), is a highly contagious and lethal viral disease of pigs. However, commercial vaccines are not yet available, and neither are drugs to prevent or control ASF. Therefore, rapid, accurate on-site diagnosis is urgently needed for detection during the early stages of ASFV infection. Herein, a cleaved probe-based loop-mediated isothermal amplification (CP-LAMP) detection method was established. Based on the original primer sets, we targeted the ASFV 9GL gene sequence to design a probe harboring a ribonucleotide insertion. Ribonuclease H2 (RNase H2) enzyme activity can only be activated when the probe is perfectly complementary, resulting in hydrolytic release of a quencher moiety, and consequent signal amplification. The method displayed robust sensitivity, with copy number detection as low as 13 copies/µL within 40 min at constant temperature (62°C). Visualization of the fluorescence product was employed using a self-designed 3D-printed visualization function cassette, and the CP-LAMP method achieved specific identification and visual detection of ASFV. Moreover, coupling the dual function cassette and smartphone quantitation makes the CP-LAMP assay first user-friendly, cost-effective, portable, rapid, and accurate point-of-care testing (POCT) platform for ASFV.

Multiplex PCR assay based on the citE2 gene and intergenic sequence for the rapid detection of Salmonella Pullorum in chickens

Salmonella is one of the most common Gram-negative pathogens and seriously threatens chicken farms and food safety. This study aimed to establish a multiplex polymerase chain reaction (PCR) approach for the identification of different Salmonella enterica subsp. enterica. The citE2 gene and interval sequence of SPS4_00301–SPS4_00311 existed in all S. enterica subsp. enterica serovars by genomic comparison. By contrast, a 76 bp deletion in citE2 was found only in Salmonella Pullorum. Two pairs of special primers designed from citE2 and interval sequence were used to establish the multiplex PCR system. The optimized multiplex PCR system could distinguish Salmonella Pullorum and non-Salmonella Pullorum. The sensitivity of the optimized multiplex PCR system could be as low as 6.25 pg/μL and 10⁴ colony-forming units (CFU)/mL for genomic DNA and Salmonella Pullorum cells, respectively. The developed multiplex PCR assay distinguished Salmonella Pullorum from 33 different Salmonella enterica subsp. enterica serotypes and 13 non-target species. The detection of egg samples artificially contaminated with Salmonella Pullorum, Salmonella Enteritidis, and naturally contaminated 69 anal swab samples showed that results were consistent with the culture method. These features indicated that the developed multiplex PCR system had high sensitivity and specificity and could be used for the accurate detection of Salmonella Pullorum in clinical samples.

A Sensitive and Specific Fluorescent RT-LAMP Assay for SARS-CoV-2 Detection in Clinical Samples

The raging COVID-19 pandemic has created an unprecedented demand for frequent and widespread testing to limit viral transmission. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) has emerged as a promising diagnostic platform for rapid detection of SARS-CoV-2, in part because it can be performed with simple instrumentation. However, isothermal amplification methods frequently yield spurious amplicons even in the absence of a template. Consequently, RT-LAMP assays can produce false positive results when they are based on generic intercalating dyes or pH-sensitive indicators. Here, we report the development of a sensitive RT-LAMP assay that leverages on a novel sequence-specific probe to guard against spurious amplicons. We show that our optimized fluorescent assay, termed LANTERN, takes only 30 min to complete and can be applied directly on swab or saliva samples. Furthermore, utilizing clinical RNA samples from 52 patients with COVID-19 infection and 21 healthy individuals, we demonstrate that our diagnostic test exhibits a specificity and positive predictive value of 95% with a sensitivity of 8 copies per reaction. Hence, our new probe-based RT-LAMP assay can serve as an inexpensive method for point-of-need diagnosis of COVID-19 and other infectious diseases.

Ultra-specific nucleic acid testing by target-activated nucleases

Specific and sensitive detection of nucleic acids is essential to clinical diagnostics and biotechnological applications. Currently, amplification steps are necessary for most detection methods due to the low concentration of nucleic acid targets in real samples. Although amplification renders high sensitivity, poor specificity is prevalent because of the lack of highly accurate precise strategies, resulting in significant false positives and false negatives. Nucleases exhibit high catalytic activity for nucleic acid cleavage which is regulated in a programmable manner. This review focuses on the latest progress in nucleic acid testing methods based on the target-activated nucleases. It summarizes the property of enzymes such as CRISPR/Cas, Argonautes, and some gene-editing irrelevant nucleases, which have been leveraged to create highly specific and sensitive nucleic acid testing tools. We elaborate on recent advances in the field of nuclease-mediated DNA recognition techniques for nucleic acid detection, and discuss its future applications and challenges in molecular diagnostics.

Microbial Food Safety in China: Past, Present, and Future

Food safety is a major public health issue worldwide, especially in heavily populated countries such as China. As in other countries, the predominant food safety issues in China are foodborne diseases caused by microbial pathogens. Hence, this review provides a systematic overview on microbial food safety in the past, present, and future in China. Management of microbial food safety in China is generally divided into three stages: Stage I before 2000, Stage II from 2000 to 2009, and Stage III from 2010 to present. At Stage I, China's main food concern gradually shifted from food security to food safety. At Stage II, foodborne pathogen surveillance was initiated and gradually became a focus of microbial food safety marked by the establishment of national food contamination monitoring system in 2000 and the promulgation of China Food Safety Law in 2009, although chemical food safety was considered a priority issue during this stage. At Stage III, microbial food safety was recognized as a high priority supported by many national food safety policies such as the launch of a national foodborne disease molecular tracing network in 2013 and the revision of China Food Safety Law in 2015. Advancement in food safety education and research support by central and local governments has also made significant contributions to tackling and solving microbial food safety problems. Management in the future should be focused on active involvement of food industries in mitigating microbial risks by introducing ISO 22000, regulatory enforcement to oversee compliances to standards and rules, and application of molecular tools for fast detection and source tracking to support decision-making. Future research efforts may include, but are not limited to, exploitation of interaction mechanisms among pathogenic bacteria, food and gut microbiota, smart traceability of microbial hazards, and development of novel antimicrobial strategies.

Competitive activation cross amplification combined with smartphone-based quantification for point-of-care detection of single nucleotide polymorphism

In this study, we firstly propose a novel smartphone-assisted visualization SNP genotyping method termed competitive activation cross amplification (CACA). The mutation detection strategy depends on the ingenious design of both a start primer and a verification probe with ribonucleotide insertion through competitive combination and perfect matching with the target DNA, Meanwhile, the RNase H2 enzyme was utilized to specifically cleave ribonucleotide insertion and achieve extremely specific dual verification. Simultaneously, the results allow both colorimetric and fluorescence product dual-mode visualization by using self-designed 3D-printed dual function cassette. We validated this novel CACA by analyzing the Salmonella Pullorum rfbS gene at the 237th site, successfully solve the current bottleneck of specific identification and visual detection of this pathogen. The concentration detection limits of the plasmid and genomic DNA were 1500 copies/μL and 3.98 pg/μL, respectively, and as low as the presence of 0.1% mutant-type can be distinguished from 99.9% wild-type. Combined with a powerful hand-warmer, which can provide heating more than 60 °C for 20 h to realize power-free, dual function cassette and smartphone quantitation, our novel CACA platform firstly realizes user-friendly, cost-effective, portable, rapid, and accurate POC detection of SNP.