1
|
Makowska S, Miedzińska K, Kairytė A, Šeputytė-Jucikė J, Strzelec K. Flame Retardancy and Thermal Stability of Rigid Polyurethane Foams Filled with Walnut Shells and Mineral Fillers. MATERIALS (BASEL, SWITZERLAND) 2024; 17:4629. [PMID: 39336370 PMCID: PMC11433397 DOI: 10.3390/ma17184629] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/06/2024] [Revised: 09/15/2024] [Accepted: 09/19/2024] [Indexed: 09/30/2024]
Abstract
Recently, the influence of the concept of environmental sustainability has increased, which includes environmentally friendly measures related to reducing the consumption of petrochemical fuels and converting post-production feedstocks into raw materials for the synthesis of polymeric materials, the addition of which would improve the performance of the final product. In this regard, the development of bio-based polyurethane foams can be carried out by, among other things, modifying polyurethane foams with vegetable or waste fillers. This paper investigates the possibility of using walnut shells (WS) and the mineral fillers vermiculite (V) and perlite (P) as a flame retardant to increase fire safety and thermal stability at higher temperatures. The effects of the fillers in amounts of 10 wt.% on selected properties of the polyurethane composites, such as rheological properties (dynamic viscosity and processing times), mechanical properties (compressive strength, flexural strength, and hardness), insulating properties (thermal conductivity), and flame retardant properties (e.g., ignition time, limiting oxygen index, and peak heat release) were investigated. It has been shown that polyurethane foams containing fillers have better performance properties compared to unmodified polyurethane foams.
Collapse
Affiliation(s)
- Sylwia Makowska
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
- Civil Engineering Research Centre, Vilnius Gediminas Technical University, Saulėtekio Av. 11, 10223 Vilnius, Lithuania
| | - Karolina Miedzińska
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
| | - Agnė Kairytė
- Civil Engineering Research Centre, Vilnius Gediminas Technical University, Saulėtekio Av. 11, 10223 Vilnius, Lithuania
- Laboratory of Thermal Insulating Materials and Acoustics, Faculty of Civil Engineering, Institute of Building Materials, Vilnius Gediminas Technical University, Linkmenu St. 28, LT-08217 Vilnius, Lithuania
| | - Jurga Šeputytė-Jucikė
- Laboratory of Thermal Insulating Materials and Acoustics, Faculty of Civil Engineering, Institute of Building Materials, Vilnius Gediminas Technical University, Linkmenu St. 28, LT-08217 Vilnius, Lithuania
| | - Krzysztof Strzelec
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
| |
Collapse
|
2
|
Blaschek L, Serk H, Pesquet E. Functional Complexity on a Cellular Scale: Why In Situ Analyses Are Indispensable for Our Understanding of Lignified Tissues. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2024. [PMID: 38832924 DOI: 10.1021/acs.jafc.4c01999] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2024]
Abstract
Lignins are a key adaptation that enables vascular plants to thrive in terrestrial habitats. Lignin is heterogeneous, containing upward of 30 different monomers, and its function is multifarious: It provides structural support, predetermined breaking points, ultraviolet protection, diffusion barriers, pathogen resistance, and drought resilience. Recent studies, carefully characterizing lignin in situ, have started to identify specific lignin compositions and ultrastructures with distinct cellular functions, but our understanding remains fractional. We summarize recent works and highlight where further in situ lignin analysis could provide valuable insights into plant growth and adaptation. We also summarize strengths and weaknesses of lignin in situ analysis methods.
Collapse
Affiliation(s)
- Leonard Blaschek
- Copenhagen Plant Science Center (CPSC), Department of Plant & Environmental Sciences, University of Copenhagen, Thorvaldsensvej 40, 1871 Frederiksberg C, Denmark
| | - Henrik Serk
- Umeå Plant Science Centre (UPSC), Department of Plant Physiology, Umeå University, 901 87 Umeå, Sweden
| | - Edouard Pesquet
- Department of Ecology, Environment and Plant Sciences (DEEP), Stockholm University, 106 91 Stockholm, Sweden
| |
Collapse
|
3
|
Zexer N, Diehn S, Elbaum R. Deposition of silica in sorghum root endodermis modifies the chemistry of associated lignin. FRONTIERS IN PLANT SCIENCE 2024; 15:1370479. [PMID: 38633454 PMCID: PMC11021652 DOI: 10.3389/fpls.2024.1370479] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/14/2024] [Accepted: 03/05/2024] [Indexed: 04/19/2024]
Abstract
Silica aggregates at the endodermis of sorghum roots. Aggregation follows a spotted pattern of locally deposited lignin at the inner tangential cell walls. Autofluorescence microscopy suggests that non-silicified (-Si) lignin spots are composed of two distinct concentric regions of varied composition. To highlight variations in lignin chemistry, we used Raman microspectroscopy to map the endodermal cell wall and silica aggregation sites in sorghum roots grown hydroponically with or without Si amendment. In +Si samples, the aggregate center was characterized by typical lignin monomer bands surrounded by lignin with a low level of polymerization. Farther from the spot, polysaccharide concentration increased and soluble silicic acid was detected in addition to silica bands. In -Si samples, the main band at the spot center was assigned to lignin radicals and highly polymerized lignin. Both +Si and -Si loci were enriched by aromatic carbonyls. We propose that at silica aggregation sites, carbonyl rich lignin monomers are locally exported to the apoplast. These monomers are radicalized and polymerized into short lignin polymers. In the presence of silicic acid, bonds typically involved in lignin extension, bind to silanols and nucleate silica aggregates near the monomer extrusion loci. This process inhibits further polymerization of lignin. In -Si samples, the monomers diffuse farther in the wall and crosslink with cell wall polymers, forming a ring of dense lignified cell wall around their export sites.
Collapse
Affiliation(s)
- Nerya Zexer
- Department of Biology, The Pennsylvania State University, University Park, PA, United States
| | - Sabrina Diehn
- The Robert H. Smith Institute of Plant Sciences and Genetics in Agriculture, The Hebrew University of Jerusalem, Rehovot, Israel
| | - Rivka Elbaum
- The Robert H. Smith Institute of Plant Sciences and Genetics in Agriculture, The Hebrew University of Jerusalem, Rehovot, Israel
| |
Collapse
|
4
|
Wang L, Xu P, Yin H, Yue Y, Kang W, Liu J, Fan Y. Fracture Resistance Biomechanisms of Walnut Shell with High-Strength and Toughening. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2303238. [PMID: 37518855 PMCID: PMC10520628 DOI: 10.1002/advs.202303238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/08/2023] [Revised: 07/09/2023] [Indexed: 08/01/2023]
Abstract
Walnut shell is lightweight material with high-strength and toughening characteristics, but it is different from other nut shells' microstructure with two or three short sclerotic cell layers and long bundle fibers. It is essential to explore the fracture resistance biomechanism of lightweight walnut shell and how to prevent damage of bionic structure. In this study, it is found that the asymmetric mass center and geometric center dissipated impact energy to the whole shell without loading concentration in the loading area. Diaphragma juglandis is a special structure improved walnut shell's toughening. The S-shape gradient porosity/elastic modulus distribution combined with pits on single auxetic sclerotic cells requires higher energy to crack expansion, then decreases its fracture behavior. These fantastic findings inspire to design fracture resistance devices including helmets, armor, automobile anti-collision beams, and re-entry capsule in spacecraft.
Collapse
Affiliation(s)
- Lizhen Wang
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| | - Peng Xu
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| | - Huan Yin
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| | - Yanxian Yue
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| | - Wei Kang
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| | - Jinglong Liu
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| | - Yubo Fan
- Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of EducationBeijing Advanced Innovation Center for Biomedical EngineeringSchool of Biological Science and Medical EngineeringSchool of Engineering MedicineBeihang UniversityBeijing100083China
| |
Collapse
|
5
|
Yu A, Zou H, Li P, Yao X, Guo J, Sun R, Wang G, Xi X, Liu A. Global Transcriptomic Analyses Provide New Insight into the Molecular Mechanisms of Endocarp Formation and Development in Iron Walnut (Juglans sigillata Dode). Int J Mol Sci 2023; 24:ijms24076543. [PMID: 37047516 PMCID: PMC10094949 DOI: 10.3390/ijms24076543] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2023] [Revised: 03/14/2023] [Accepted: 03/27/2023] [Indexed: 04/03/2023] Open
Abstract
Iron walnut (Juglans sigillata Dode) is a native species in southwestern China that exhibits variation in both fruit morphology and shell thickness. However, the underlying molecular processes controlling hardened endocarp development in walnut has not yet been reported. Here, we generated transcriptional profiles of iron walnut endocarp at three developmental stages using “Dapao”, the most common commercial variety. Using pairwise comparisons between these three stages, a total of 8555 non-redundant differentially expressed genes (DEGs) were identified, and more than one-half of the total DEGs exhibited significant differential expression in stage I as compared with stage II or stage III, suggesting that the first stage may ultimately determine the final characteristics of the mature walnut shell. Furthermore, in the clustering analysis of the above DEGs, 3682, 2349, and 2388 genes exhibited the highest expression in stages I, II, and III, respectively. GO enrichment analysis demonstrated that the major transcriptional variation among the three developmental stages was caused by differences in cell growth, plant hormones, metabolic process, and phenylpropanoid metabolism. Namely, using the tissue-specific expression analysis and a gene co-expression network, we identified MADS-box transcription factor JsiFBP2 and bHLH transcription factor JsibHLH94 as candidate regulators of endocarp formation in the early stage, and JsiNAC56 and JsiMYB78 might play key roles in regulating the lignification process of endocarp in the late stage. This study provides useful information for further research to dissect the molecular mechanisms governing the shell formation and development of iron walnut.
Collapse
Affiliation(s)
- Anmin Yu
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| | - Hanyu Zou
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| | - Ping Li
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| | - Xiaowei Yao
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| | - Jiayu Guo
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| | - Rui Sun
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| | - Gaosheng Wang
- Yunnan Academy of Forestry and Grassland, Kunming 650201, China
| | - Xueliang Xi
- Yunnan Academy of Forestry and Grassland, Kunming 650201, China
| | - Aizhong Liu
- Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Southwest Forestry University, Kunming 650224, China
| |
Collapse
|
6
|
Lin S, Zhang Y, Luo L, Huang M, Cao H, Hu J, Sun C, Chen J. Visualization and quantification of coconut using advanced computed tomography postprocessing technology. PLoS One 2023; 18:e0282182. [PMID: 36827442 PMCID: PMC9956593 DOI: 10.1371/journal.pone.0282182] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Accepted: 02/09/2023] [Indexed: 02/26/2023] Open
Abstract
INTRODUCTION Computed tomography (CT) is a non-invasive examination tool that is widely used in medicine. In this study, we explored its value in visualizing and quantifying coconut. MATERIALS AND METHODS Twelve coconuts were scanned using CT for three months. Axial CT images of the coconuts were obtained using a dual-source CT scanner. In postprocessing process, various three-dimensional models were created by volume rendering (VR), and the plane sections of different angles were obtained through multiplanar reformation (MPR). The morphological parameters and the CT values of the exocarp, mesocarp, endocarp, embryo, bud, solid endosperm, liquid endosperm, and coconut apple were measured. The analysis of variances was used for temporal repeated measures and linear and non-linear regressions were used to analyze the relationship between the data. RESULTS The MPR images and VR models provide excellent visualization of the different structures of the coconut. The statistical results showed that the weight of coconut and liquid endosperm volume decreased significantly during the three months, while the CT value of coconut apple decreased slightly. We observed a complete germination of a coconut, its data showed a significant negative correlation between the CT value of the bud and the liquid endosperm volume (y = -2.6955x + 244.91; R2 = 0.9859), and a strong positive correlation between the height and CT value of the bud (y = 1.9576 ln(x) -2.1655; R2 = 0.9691). CONCLUSION CT technology can be used for visualization and quantitative analysis of the internal structure of the coconut, and some morphological changes and composition changes of the coconut during the germination process were observed during the three-month experiment. Therefore, CT is a potential tool for analyzing coconuts.
Collapse
Affiliation(s)
- Shenghuang Lin
- Haikou Affiliated Hospital of Central South University Xiangya School of Medicine, Haikou, China
| | - Yu Zhang
- College of Computer Science and Technology, Hainan University, Haikou, China
| | - Li’an Luo
- Siemens Healthineers, Guangzhou, China
| | - Mengxing Huang
- College of Information and Communication Engineering, Hainan University, Haikou, China
| | - Hongxing Cao
- Coconut Research Institute, Chinese Academy of Tropical Agricultural Sciences, Wenchang, Hainan, People’s Republic of China
| | - Jinyue Hu
- Haikou Affiliated Hospital of Central South University Xiangya School of Medicine, Haikou, China
| | - Chengxu Sun
- Coconut Research Institute, Chinese Academy of Tropical Agricultural Sciences, Wenchang, Hainan, People’s Republic of China
- * E-mail: (JC); (CS)
| | - Jing Chen
- Haikou Affiliated Hospital of Central South University Xiangya School of Medicine, Haikou, China
- * E-mail: (JC); (CS)
| |
Collapse
|
7
|
Abstract
Natural structural materials typically feature complex hierarchical anisotropic architectures, resulting in excellent damage tolerance. Such highly anisotropic structures, however, also provide an easy path for crack propagation, often leading to catastrophic fracture as evidenced, for example, by wood splitting. Here, we describe the weakly anisotropic structure of Ginkgo biloba (ginkgo) seed shell, which has excellent crack resistance in different directions. Ginkgo seed shell is composed of tightly packed polygonal sclereids with cell walls in which the cellulose microfibrils are oriented in a helicoidal pattern. We found that the sclereids contain distinct pits, special fine tubes like a "screw fastener," that interlock the helicoidal cell walls together. As a result, ginkgo seed shell demonstrates crack resistance in all directions, exhibiting specific fracture toughness that can rival other highly anisotropic natural materials, such as wood, bone, insect cuticle, and nacre. In situ characterization reveals ginkgo's unique toughening mechanism: pit-guided crack propagation. This mechanism forces the crack to depart from the weak compound middle lamella and enter into the sclereid, where the helicoidal cell wall significantly inhibits crack growth by the cleavage and breakage of the fibril-based cell walls. Ginkgo's toughening mechanism could provide guidelines for a new bioinspired strategy for the design of high-performance bulk materials.
Collapse
|
8
|
Genome-Wide Identification and Expression Analysis of the CAD Gene Family in Walnut (Juglans regia L.). Biochem Genet 2022; 61:1065-1085. [DOI: 10.1007/s10528-022-10303-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/21/2022] [Accepted: 11/08/2022] [Indexed: 11/25/2022]
|
9
|
Oliva A, Papirio S, Esposito G, Lens PNL. Ultrasounds application for nut and coffee wastes valorisation via biomolecules solubilisation and methane production. WASTE MANAGEMENT (NEW YORK, N.Y.) 2022; 150:373-382. [PMID: 35917628 DOI: 10.1016/j.wasman.2022.07.010] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/26/2022] [Revised: 07/05/2022] [Accepted: 07/13/2022] [Indexed: 06/15/2023]
Abstract
Lignocellulosic materials (LMs) are abundant feedstocks with excellent potential for biofuels and biocommodities production. In particular, nut and coffee wastes are rich in biomolecules, e.g. sugars and polyphenols, the valorisation of which still has to be fully disclosed. This study investigated the effectiveness of ultrasounds coupled with hydrothermal (i.e. ambient temperature vs 80 °C) and methanol (MeOH)-based pretreatments for polyphenols and sugar solubilisation from hazelnut skin (HS), almond shell (AS), and spent coffee grounds (SCG). The liquid fraction obtained from the pretreated HS was the most promising in terms of biomolecules solubilisation. The highest polyphenols, i.e. 123.9 (±2.3) mg/g TS, and sugar, i.e. 146.0 (±3.4) mg/g TS, solubilisation was obtained using the MeOH-based medium. However, the MeOH-based media were not suitable for direct anaerobic digestion (AD) due to the MeOH inhibition during AD. The water-based liquors obtained from pretreated AS and SCG exhibited a higher methane potential, i.e. 434.2 (±25.1) and 685.5 (±39.5) mL CH4/g glucosein, respectively, than the HS liquors despite having a lower sugar concentration. The solid residues recovered after ultrasounds pretreatment were used as substrates for AD as well. Regardless the pretreatment condition, the methane potential of the ultrasounds pretreated HS, AS, and SCG was not improved, achieving maximally 255.4 (±7.4), 42.8 (±3.3), and 366.2 (±4.2) mL CH4/g VS, respectively. Hence, the solid and liquid fractions obtained from HS, AS, and SCG showed great potential either as substrates for AD or, in perspective, for biomolecules recovery in a biorefinery context.
Collapse
Affiliation(s)
- A Oliva
- Department of Microbiology and Ryan Institute, National University of Ireland Galway, University Road, H91 TK33 Galway, Ireland.
| | - S Papirio
- Department of Civil, Architectural and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Naples, Italy
| | - G Esposito
- Department of Civil, Architectural and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Naples, Italy
| | - P N L Lens
- Department of Microbiology and Ryan Institute, National University of Ireland Galway, University Road, H91 TK33 Galway, Ireland
| |
Collapse
|
10
|
Antreich SJ, Huss JC, Xiao N, Singh A, Gierlinger N. The walnut shell network: 3D visualisation of symplastic and apoplastic transport routes in sclerenchyma tissue. PLANTA 2022; 256:49. [PMID: 35881249 PMCID: PMC9325819 DOI: 10.1007/s00425-022-03960-w] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2022] [Accepted: 07/06/2022] [Indexed: 05/16/2023]
Abstract
High symplastic connectivity via pits was linked to the lignification of the developing walnut shell. With maturation, this network lessened, whereas apoplastic intercellular space remained and became relevant for shell drying. The shell of the walnut (Juglans regia) sclerifies within several weeks. This fast secondary cell wall thickening and lignification of the shell tissue might need metabolites from the supporting husk tissue. To reveal the transport capacity of the walnut shell tissue and its connection to the husk, we visualised the symplastic and apoplastic transport routes during shell development by serial block face-SEM and 3D reconstruction. We found an extensive network of pit channels connecting the cells within the shell tissue, but even more towards the husk tissue. Each pit channel ended in a pit field, which was occupied by multiple plasmodesmata passing through the middle lamella. During shell development, secondary cell wall formation progressed towards the interior of the cell, leaving active pit channels open. In contrast, pit channels, which had no plasmodesmata connection to a neighbouring cell, got filled by cellulose layers from the inner cell wall lamellae. A comparison with other nut species showed that an extended network during sclerification seemed to be linked to high cell wall lignification and that the connectivity between cells got reduced with maturation. In contrast, intercellular spaces between cells remained unchanged during the entire sclerification process, allowing air and water to flow through the walnut shell tissue when mature. The connectivity between inner tissue and environment was essential during shell drying in the last month of nut development to avoid mould formation. The findings highlight how connectivity and transport work in developing walnut shell tissue and how finally in the mature state these structures influence shell mechanics, permeability, conservation and germination.
Collapse
Affiliation(s)
- Sebastian J Antreich
- Institute of Biophysics, Department of Nanobiotechnology, University of Natural Resources and Life Sciences, 1190, Vienna, Austria.
| | - Jessica C Huss
- Institute of Biophysics, Department of Nanobiotechnology, University of Natural Resources and Life Sciences, 1190, Vienna, Austria
| | - Nannan Xiao
- Institute of Biophysics, Department of Nanobiotechnology, University of Natural Resources and Life Sciences, 1190, Vienna, Austria
| | - Adya Singh
- Institute of Biophysics, Department of Nanobiotechnology, University of Natural Resources and Life Sciences, 1190, Vienna, Austria
| | - Notburga Gierlinger
- Institute of Biophysics, Department of Nanobiotechnology, University of Natural Resources and Life Sciences, 1190, Vienna, Austria
| |
Collapse
|
11
|
Characterization of the hierarchical architecture and micromechanical properties of walnut shell (Juglans regia L.). J Mech Behav Biomed Mater 2022; 130:105190. [PMID: 35344757 DOI: 10.1016/j.jmbbm.2022.105190] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2021] [Revised: 02/22/2022] [Accepted: 03/18/2022] [Indexed: 11/21/2022]
Abstract
In the present work a comprehensive characterization of the hierarchical architecture of the walnut shell (Juglans regia L.) was carried out using scanning electron microscopy (SEM), atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). Furthermore, micromechanical properties (hardness, HIT and elastic modulus, EIT) of plant tissues were evaluated at cell wall level by applying the instrumented indentation technique (IIT). The complex architecture of the material was described in terms of four hierarchical levels (HL): endocarp (H1), plant tissues (H2), plant cells (H3) and cell wall (H4). Our findings revealed that the walnut shell consists of a multilayer structure (sclerenchyma tissue, ST; interface tissue, IT; porous tissue, PT; and flattened parenchyma tissue, FPT), where differences in the microstructure and composition of plant tissues generate parallel gradients along the cross-section. The indentation tests showed a functional gradient with a sandwich-like configuration, i.e., a lightweight and soft layer (PT, HIT = 0.04 GPa) is located between two dense and hard layers (ST, HIT = 0.33 GPa; FPT, HIT = 0.28 GPa); where additionally there is an interface between ST and PT (IT, HIT = 0.16 GPa). This configuration is a successful strategy designed by nature to improve the protection of the kernel by increasing the strength of the shell. Therefore, the walnut shell can be considered as a functionally graded material (FGM), which can be used as bioinspiration for the design of new functional synthetic materials. In addition, we proposed some structure-property-function relationships in the whole walnut shell and in each of the plant tissues.
Collapse
|
12
|
Hong T, Yin JY, Nie SP, Xie MY. Applications of infrared spectroscopy in polysaccharide structural analysis: Progress, challenge and perspective. Food Chem X 2021; 12:100168. [PMID: 34877528 PMCID: PMC8633561 DOI: 10.1016/j.fochx.2021.100168] [Citation(s) in RCA: 124] [Impact Index Per Article: 41.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/07/2021] [Revised: 11/16/2021] [Accepted: 11/19/2021] [Indexed: 12/31/2022] Open
Abstract
Functional properties of polysaccharides depend on their structural features. IR spectroscopy is widely used in polysaccharide structural analysis. Classical applications of IR spectroscopy in polysaccharide are reviewed. IR integrating techniques can considerably expand its application scope.
Polysaccharides are important biomacromolecules with numerous beneficial functions and a wide range of industrial applications. Functions and properties of polysaccharides are closely related to their structural features. Infrared (IR) spectroscopy is a well-established technique which has been widely applied in polysaccharide structural analysis. In this paper, the principle of IR and interpretation of polysaccharide IR spectrum are briefly introduced. Classical applications of IR spectroscopy in polysaccharide structural elucidation are reviewed from qualitative and quantitative aspects. Some advanced IR techniques including integrating with mass spectrometry (MS), microscopy and computational chemistry are introduced and their applications are emphasized. These emerging techniques can considerably expand application scope of IR, thus exert a more important effect on carbohydrate characterization. Overall, this review seeks to provide a comprehensive insight to applications of IR spectroscopy in polysaccharide structural analysis and highlights the importance of advanced IR-integrating techniques.
Collapse
Affiliation(s)
- Tao Hong
- State Key Laboratory of Food Science and Technology, China-Canada Joint Laboratory of Food Science and Technology (Nanchang), Nanchang University, 235 Nanjing East Road, Nanchang, Jiangxi 330047, People's Republic of China
| | - Jun-Yi Yin
- State Key Laboratory of Food Science and Technology, China-Canada Joint Laboratory of Food Science and Technology (Nanchang), Nanchang University, 235 Nanjing East Road, Nanchang, Jiangxi 330047, People's Republic of China
| | - Shao-Ping Nie
- State Key Laboratory of Food Science and Technology, China-Canada Joint Laboratory of Food Science and Technology (Nanchang), Nanchang University, 235 Nanjing East Road, Nanchang, Jiangxi 330047, People's Republic of China
| | - Ming-Yong Xie
- State Key Laboratory of Food Science and Technology, China-Canada Joint Laboratory of Food Science and Technology (Nanchang), Nanchang University, 235 Nanjing East Road, Nanchang, Jiangxi 330047, People's Republic of China
| |
Collapse
|
13
|
Zhang R, Zhu Z, Jia W. Time-Series Lipidomics Insights into the Progressive Characteristics of Lipid Constituents of Fresh Walnut during Postharvest Storage. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2021; 69:13796-13809. [PMID: 34763422 DOI: 10.1021/acs.jafc.1c05120] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
A high-throughput lipid profiling platform adopting an accurate quantification strategy was built based on Q-Orbitrap mass spectrometry. Lipid components of fresh walnut during postharvest storage were determined, and the fatty acid distributions in triacylglycerol and polar lipids were also characterized. A total of 554 individual lipids in fresh walnut were mainly glycerolipids (56.7%), glycerophospholipids (32.4%), and sphingolipids (11%). With the progress of postharvest storage, 16 lipid subclasses in the stored walnut sample were significantly degraded, in which 34 lipids changed significantly between the fresh and stored groups. The sphingolipid metabolism, glycerolipid metabolism, and linoleic acid metabolism pathways were significantly enriched. The oxidation and degradation mechanism of linoleic acid in walnut kernel during postharvest storage was proposed. The established lipidomics platform can supply reliable and traceable lipid profiling data, help to improve the understanding of lipid degradation in fresh walnut, and offer a framework for analyzing lipid metabolisms in other tree nuts.
Collapse
Affiliation(s)
- Rong Zhang
- School of Food and Biological Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Zhenbao Zhu
- School of Food and Biological Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Wei Jia
- School of Food and Biological Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
- Shaanxi Research Institute of Agricultural Products Processing Technology, Xi'an 710021, China
| |
Collapse
|
14
|
Xiao N, Felhofer M, Antreich SJ, Huss JC, Mayer K, Singh A, Bock P, Gierlinger N. Twist and lock: nutshell structures for high strength and energy absorption. ROYAL SOCIETY OPEN SCIENCE 2021; 8:210399. [PMID: 34430046 PMCID: PMC8355673 DOI: 10.1098/rsos.210399] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/09/2021] [Accepted: 07/20/2021] [Indexed: 05/04/2023]
Abstract
Nutshells achieve remarkable properties by optimizing structure and chemistry at different hierarchical levels. Probing nutshells from the cellular down to the nano- and molecular level by microchemical and nanomechanical imaging techniques reveals insights into nature's packing concepts. In walnut and pistachio shells, carbohydrate and lignin polymers assemble to form thick-walled puzzle cells, which interlock three-dimensionally and show high tissue strength. Pistachio additionally achieves high-energy absorption by numerous lobes interconnected via ball-joint-like structures. By contrast, the three times more lignified walnut shells show brittle LEGO-brick failure, often along the numerous pit channels. In both species, cell walls (CWs) show distinct lamellar structures. These lamellae involve a helicoidal arrangement of cellulose macrofibrils as a recurring motif. Between the two nutshell species, these lamellae show differences in thickness and pitch angle, which can explain the different mechanical properties on the nanolevel. Our in-depth study of the two nutshell tissues highlights the role of cell form and their interlocking as well as plant CW composition and structure for mechanical protection. Understanding these plant shell concepts might inspire biomimetic material developments as well as using walnut and pistachio shell waste as sustainable raw material in future applications.
Collapse
Affiliation(s)
- Nannan Xiao
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Martin Felhofer
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Sebastian J. Antreich
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Jessica C. Huss
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Konrad Mayer
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Adya Singh
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Peter Bock
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| | - Notburga Gierlinger
- Institute of Biophysics, University of Natural Resources and Life Sciences Vienna (BOKU), 1190 Vienna, Austria
| |
Collapse
|
15
|
Antreich SJ, Xiao N, Huss JC, Gierlinger N. A belt for the cell: cellulosic wall thickenings and their role in morphogenesis of the 3D puzzle cells in walnut shells. JOURNAL OF EXPERIMENTAL BOTANY 2021; 72:4744-4756. [PMID: 33963747 PMCID: PMC8219037 DOI: 10.1093/jxb/erab197] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/22/2021] [Accepted: 05/03/2021] [Indexed: 05/25/2023]
Abstract
Walnut (Juglans regia) kernels are protected by a tough shell consisting of polylobate sclereids that interlock into a 3D puzzle. The shape transformations from isodiametric to lobed cells is well documented for 2D pavement cells, but not for 3D puzzle sclereids. Here, we study the morphogenesis of these cells by using a combination of different imaging techniques. Serial face-microtomy enabled us to reconstruct tissue growth of whole walnut fruits in 3D, and serial block face-scanning electron microscopy exposed cell shapes and their transformation in 3D during shell tissue development. In combination with Raman and fluorescence microscopy, we revealed multiple loops of cellulosic thickenings in cell walls, acting as stiff restrictions during cell growth and leading to the lobed cell shape. Our findings contribute to a better understanding of the 3D shape transformation of polylobate sclereids and the role of pectin and cellulose within this process.
Collapse
Affiliation(s)
- Sebastian J Antreich
- Department of Nanobiotechnology, Institute of Biophysics, University of Natural Resources and Life Sciences, Vienna, Austria
| | - Nannan Xiao
- Department of Nanobiotechnology, Institute of Biophysics, University of Natural Resources and Life Sciences, Vienna, Austria
| | - Jessica C Huss
- Department of Nanobiotechnology, Institute of Biophysics, University of Natural Resources and Life Sciences, Vienna, Austria
| | - Notburga Gierlinger
- Department of Nanobiotechnology, Institute of Biophysics, University of Natural Resources and Life Sciences, Vienna, Austria
| |
Collapse
|
16
|
Abstract
This article comments on: Antreich SJ, Xiao N, Huss JC, Gierlinger N. 2021. A belt for the cell: cellulosic wall thickenings and their role in morphogenesis of the 3D puzzle cells in walnut shells. Journal of Experimental Botany 72,4744–4756.
Collapse
Affiliation(s)
- Rivka Elbaum
- The Smith Institute of Plant Sciences and Genetics in Agriculture, The Hebrew University of Jerusalem, Rehovot, Israel
- Correspondence:
| | - Michael Elbaum
- Department of Chemical and Biological Physics, Weizmann Institute of Science, Rehovot, Israel
| |
Collapse
|
17
|
Huss JC, Gierlinger N. Functional packaging of seeds. THE NEW PHYTOLOGIST 2021; 230:2154-2163. [PMID: 33629369 PMCID: PMC8252473 DOI: 10.1111/nph.17299] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2020] [Accepted: 02/16/2021] [Indexed: 05/28/2023]
Abstract
The encapsulation of seeds in hard coats and fruit walls (pericarp layers) fulfils protective and dispersal functions in many plant families. In angiosperms, packaging structures possess a remarkable range of different morphologies and functionalities, as illustrated by thermo and hygro-responsive seed pods and appendages, as well as mechanically strong and water-impermeable shells. Key to these different functionalities are characteristic structural arrangements and chemical modifications of the underlying sclerenchymatous tissues. Although many ecological aspects of hard seed encapsulation have been well documented, a detailed understanding of the relationship between tissue structure and function only recently started to emerge, especially in the context of environmentally driven fruit opening and seed dispersal (responsive encapsulations) and the outstanding durability of some seed coats and indehiscent fruits (static encapsulations). In this review, we focus on the tissue properties of these two systems, with particular consideration of water interactions, mechanical resistance, and force generation. Common principles, as well as unique adaptations, are discussed in different plant species. Understanding how plants integrate a broad range of functions and properties for seed protection during storage and dispersal plays a central role for seed conservation, population dynamics, and plant-based material developments.
Collapse
Affiliation(s)
- Jessica C. Huss
- Department of NanobiotechnologyInstitute of BiophysicsUniversity of Natural Resources and Life Sciences (BOKU) ViennaMuthgasse 11/IIVienna1900Austria
| | - Notburga Gierlinger
- Department of NanobiotechnologyInstitute of BiophysicsUniversity of Natural Resources and Life Sciences (BOKU) ViennaMuthgasse 11/IIVienna1900Austria
| |
Collapse
|
18
|
Recent Progress on the Characterization of Cellulose Nanomaterials by Nanoscale Infrared Spectroscopy. NANOMATERIALS 2021; 11:nano11051353. [PMID: 34065487 PMCID: PMC8190638 DOI: 10.3390/nano11051353] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/14/2021] [Revised: 05/11/2021] [Accepted: 05/17/2021] [Indexed: 01/17/2023]
Abstract
Researches of cellulose nanomaterials have seen nearly exponential growth over the past several decades for versatile applications. The characterization of nanostructural arrangement and local chemical distribution is critical to understand their role when developing cellulose materials. However, with the development of current characterization methods, the simultaneous morphological and chemical characterization of cellulose materials at nanoscale resolution is still challenging. Two fundamentally different nanoscale infrared spectroscopic techniques, namely atomic force microscope based infrared spectroscopy (AFM-IR) and infrared scattering scanning near field optical microscopy (IR s-SNOM), have been established by the integration of AFM with IR spectroscopy to realize nanoscale spatially resolved imaging for both morphological and chemical information. This review aims to summarize and highlight the recent developments in the applications of current state-of-the-art nanoscale IR spectroscopy and imaging to cellulose materials. It briefly outlines the basic principles of AFM-IR and IR s-SNOM, as well as their advantages and limitations to characterize cellulose materials. The uses of AFM-IR and IR s-SNOM for the understanding and development of cellulose materials, including cellulose nanomaterials, cellulose nanocomposites, and plant cell walls, are extensively summarized and discussed. The prospects of future developments in cellulose materials characterization are provided in the final part.
Collapse
|