Nitrogen Source Matters: High NH4/NO3 Ratio Reduces Cannabinoids, Terpenoids, and Yield in Medical Cannabis

Selected cannabis cultivars modulate glial activation: in vitro and in vivo studies

INTRODUCTION

Multiple sclerosis (MS) is a chronic autoimmune disease of the central nervous system characterized by neuroinflammation, demyelination and axonal loss. Cannabis, an immunomodulating agent, is known for its ability to treat MS effectively. However, due to variations in the profile of secondary metabolites, especially cannabinoids, among cannabis cultivars, the effectiveness of cannabis treatment can vary, with significant variability in the effects on different biological parameters. For screening available cultivars, cellular in vitro as well as pre-clinical in vivo assays, are required to evaluate the effectiveness of the wide range of chemical variability that exists in cannabis cultivars. This study evaluated comparatively three chemically diverse cannabis cultivars, CN2, CN4 and CN6, containing different ratios of phytocannabinoids, for their neuroinflammatory activity in MS model.

MATERIALS AND METHODS

In vitro experiments were performed with lipopolysaccharide (LPS)-activated BV-2 microglia and primary glial cells to evaluate the effect of different cannabis cultivars on nitric oxide (NO) and inflammatory cytokines, as well as inducible nitric oxide synthase (iNOS) protein expression. An in vivo experiment using the experimental autoimmune encephalomyelitis (EAE) MS model was conducted using Myelin oligodendrocyte glycoprotein (MOG) as the activating peptide. The cannabis extracts of the cultivars CN2, CN4, CN6 or vehicle, were intraperitoneally injected with clinical scores given based on observed symptoms over the course of study. At the end of the experiment, the mice were sacrificed, and splenocyte cytokine secretion was measured using ELISA. Lumbar sections from the spinal cord of treated MS mice were evaluated for microglia, astrocytes and CD4+ cells.

RESULTS

Extracts of the CN2 cultivar contained tetrahydrocannabinolic acid (THCA) and tetrahydrocannabinol (THC) without cannabidiol (CBD), and a number of monoterpenes. CN4 contained cannabidiolic acid (CBDA) and tetrahydrocannabidiolic acid (THCA), with significant amounts of THC: CBD in a 1:1 ratio, as well as sesquiterpenes and some monoterpenes; and CN6 contained primarily CBDA and THCA, as well as THC and CBD in a 2:1 ratio, with some sesquiterpenes and no monoterpenes. All extracts were not cytotoxic in glial cells up to 50 µg/ml. Dose dependent inhibition of LPS-induced BV2 as well as primary microglial NO secretion confirmed the anti-inflammatory and anti-oxidative activity of the three cannabis cultivars. CN2 but not CN4 reduced both astrocytosis and microglial activation in lumbar sections of EAE mice. In contrast, CN4 but not CN2 significantly decreased the secretion of TNFα and Interferon γ (IFNγ) in primary splenocytes extracted from EAE mice.

CONCLUSIONS

While both cannabis cultivars, CN2 and CN4, significantly reduced the severity of the clinical signs throughout the course of the study, they modulated different inflammatory mediators and pathways, probably due to differences in their phytocannabinoid composition. This demonstrates the differential potential of cannabis cultivars differing in chemotype to regulate neuroinflammation and their potential to treat MS.

Plant secondary metabolism in a fluctuating world: climate change perspectives

Climate changes have unpredictable effects on ecosystems and agriculture. Plants adapt metabolically to overcome these challenges, with plant secondary metabolites (PSMs) being crucial for plant-environment interactions. Thus, understanding how PSMs respond to climate change is vital for future cultivation and breeding strategies. Here, we review PSM responses to climate changes such as elevated carbon dioxide, ozone, nitrogen deposition, heat and drought, as well as a combinations of different factors. These responses are complex, depending on stress dosage and duration, and metabolite classes. We finally identify mechanisms by which climate change affects PSM production ecologically and molecularly. While these observations provide insights into PSM responses to climate changes and the underlying regulatory mechanisms, considerable further research is required for a comprehensive understanding.

Ammonium to total nitrogen ratio affects the purslane (Portulaca oleracea L.) growth, nutritional, and antioxidant status

Purslane (Portulaca oleracea L.) is a widespread weed, which is greatly appreciated for its high nutritional value. The present work evaluated the effect of different ammonium/total nitrogen ratios (NH4/Total N: Nr 0.01-0.15) on growth, physiological and biochemical parameters, and nutrient accumulation in different plant parts of hydroponically grown purslane, under two growing seasons, spring and autumn. Young seedlings of purslane were transferred to a Nutrient Film Technique (NFT) system and they were exposed to different Nr levels. The pH and the electrical conductivity of the nutrient solution were kept constant at 5.8 and 2.3 mS cm-1, respectively. After the end of the cultivation periods (19 days for spring and 22 days for autumn), a series of assessments (growth parameters, mineral content in different plant organs, antioxidant status of the plant, etc.) were done. Plant height, leaf number, root fresh weight and plant biomass revealed decreased trends at the higher NH4/total N ratios, especially during the autumn growing season. Total phenols, flavonoids and antioxidant capacity appeared increased at Nr ≤ 0.10 during both seasons (autumn and spring), revealing higher nitrogen accumulation rates and increased water and nutrient use efficiency. Purslane plants grown in Nr 0.05-0.10 revealed a less intense oxidative stress, with decreased lipid peroxidation levels that was the result of the activation of both enzymatic (superoxide dismutase, catalase and peroxidase) and non-enzymatic (ascorbic acid) antioxidant capacity of the plant. Increased Nr resulted in the accumulation of potassium, while calcium and magnesium levels in leaves were decreased. Additionally, the greater water use efficiency was measured for plants grown under Nr 0.01-0.05. Therefore, the recommended ammonium/total nitrogen ratio for purslane production of increased yield, improved nutritional value and efficient use of water and nitrogen sources is to employ Nr of 0.05, while additional care should be addressed during autumn periods as plants are subjected to greater impacts of the Nr ratio.

Cannabis Hunger Games: nutrient stress induction in flowering stage - impact of organic and mineral fertilizer levels on biomass, cannabidiol (CBD) yield and nutrient use efficiency

Indoor medicinal cannabis cultivation systems enable year-round cultivation and better control of growing factors, however, such systems are energy and resource intensive. Nutrient deprivation during flowering can trigger nutrient translocation and modulate the production of cannabinoids, which might increase agronomic nutrient use efficiency, and thus, a more sustainable use of fertilizers. This experiment compares two fertilizer types (mineral and organic) applied in three dilutions (80, 160 and 240 mg N L-1) to evaluate the effect of nutrient deprivation during flowering on biomass, Cannabidiol (CBD) yield and nutrient use efficiency of N, P and K. This is the first study showing the potential to reduce fertilizer input while maintaining CBD yield of medicinal cannabis. Under nutrient stress, inflorescence yield was significantly lower at the final harvest, however, this was compensated by a higher CBD concentration, resulting in 95% of CBD yield using one-third less fertilizer. The higher nutrient use efficiency of N, P, and K in nutrient-deprived plants was achieved by a larger mobilization and translocation of nutrients increasing the utilization efficiency of acquired nutrients. The agronomic nutrient use efficiency of CBD yield - for N and K - increased 34% for the organic fertilizers and 72% for the mineral fertilizers comparing the dilution with one-third less nutrients (160) with the highest nutrient concentration (240). Differences in CBD yield between fertilizer types occurred only at the final harvest indicating limitations in nutrient uptake due to nutrient forms in the organic fertilizer. Our results showed a lower acquisition and utilization efficiency for the organic fertilizer, proposing the necessity to improve either the timing of bio-availability of organic fertilizers or the use of soil amendments.

Response of Medical Cannabis to Magnesium (Mg) Supply at the Vegetative Growth Phase

Recent studies demonstrated a significant impact of some major macronutrients on function and production of medical cannabis plants, yet information on the effect of most nutrients, including Mg, is scarce. Magnesium is required for major physiological functions and metabolic processes in plants, and in the present study we studied the effects of five Mg treatments (2, 20, 35, 70, and 140 mg L^-1 Mg), on plant development and function, and distribution of minerals in drug-type (medical) cannabis plants, at the vegetative growth phase. The plants were cultivated in pots under controlled environment conditions. The results demonstrate that plant development is optimal under Mg supply of 35-70 mg L^-1 (ppm), and impaired under lower Mg input of 2-20 mg L^-1. Two mg L^-1 Mg resulted in visual deficiency symptoms, shorter plants, reduced photosynthesis rate, transpiration rate, photosynthetic pigments and stomatal conduction in young-mature leaves, and a 28% reduction of total plant biomass compared to the optimal supply of 35 mg L^-1 Mg. The highest supply level of 140 mg L^-1 Mg induced a small decrease in physiological function, which did not affect morphological development and biomass accumulation. The low-deficient Mg supply of 2 mg L^-1 Mg stimulated Mg uptake and accumulation of N, P, K, Ca, Mn, and Zn in the plant. Increased Mg supply impaired uptake of Ca and K and their root-to-shoot translocation, demonstrating competitive cation inhibition. Mg-deficiency symptoms developed first in old leaves (at 2 mg L^-1 Mg) and progressed towards young-mature leaves, demonstrating ability for Mg in-planta storage and remobilization. Mg toxicity symptoms appeared in old leaves from the bottom of the plants, under 140 mg L^-1 Mg. Taken together, the findings suggest 35-70 mg L^-1 Mg as the optimal concentration range for cannabis plant development and function at the vegetative growth phase.

Determination of optimal NH4+/K + concentration and corresponding ratio critical for growth of tobacco seedlings in a hydroponic system

Inherently, ammonium (NH₄ ⁺) is critical for plant growth; however, its toxicity suppresses potassium (K⁺) uptake and vice-versa. Hence, attaining a nutritional balance between these two ions (NH₄ ⁺ and K⁺) becomes imperative for the growth of tobacco seedlings. Therefore, we conducted a 15-day experimental study on tobacco seedlings exposed to different concentrations (47 treatments) of NH₄ ⁺/K⁺ at different corresponding 12 ratios simultaneously in a hydroponic system. Our study aimed at establishing the optimal NH₄ ⁺-K⁺ concentration and the corresponding ratio required for optimal growth of different tobacco plant organs during the seedling stage. The controls were the baseline for comparison in this study. Plants with low or excessive NH₄ ⁺-K⁺ concentration had leaf chlorosis or dark greenish colouration, stunted whole plant part biomass, and thin roots. We found that adequate K⁺ supply is a pragmatic way to mitigate NH₄ ⁺-induced toxicity in tobacco plants. The optimal growth for tobacco leaf and root was attained at NH₄ ⁺-K⁺ concentrations 2-2 mM (ratio 1:1), whereas stem growth was optimal at NH₄ ⁺-K⁺ 1-2 mM (1:2). The study provided an insight into the right combination of NH₄ ⁺/K⁺ that could mitigate or prevent NH₄ ⁺ or K⁺ stress in the tobacco seedlings.

Foliar Symptomology, Nutrient Content, Yield, and Secondary Metabolite Variability of Cannabis Grown Hydroponically with Different Single-Element Nutrient Deficiencies

In controlled environment production systems, Cannabis sativa (hereafter cannabis) is a commodity with high nutrient demands due to prolific growth under optimized environmental conditions. Since nutrient deficiencies can reduce yield and quality, cultivators need tools to rapidly detect and evaluate deficiency symptoms so corrective actions can be taken quickly to minimize losses. We grew cannabis plants in solution culture with different individual nutrient elements withheld from the solutions to identify deficiency symptoms. Control plants received a complete nutrient recipe, whereas the following single elements were withheld from the respective nutrient deficiency treatments: N, P, K, Ca, Mg, S, Fe, and Mn. The nutrient treatments began when the photoperiod was switched to a 12/12 h (light/dark), and plants were grown to commercial maturity. Plants were monitored daily, and the development of visual deficiency symptoms were recorded. Photographs of each plant were taken weekly. Upon the onset of visual deficiency symptoms, both upper- and lower-canopy foliage were analyzed for nutrient element concentrations. At harvest, plants were evaluated for biomass partitioning, and the cannabinoid composition of inflorescence tissues. This manuscript describes the onset and progression of nutrient deficiency symptoms (with pictures), relates symptomology to foliar nutrient analyses, and contextualizes the relationships between nutrient deficiencies and cannabis growth, yield, and quality. Aboveground vegetative fresh weights were reduced by 73% in the -N treatment and 59% in the -P treatment, compared with the control. All deficiency treatments except for -Fe and -Mn had floral yields reduced by between 33% to 72%, compared with the control. Overall, deficiencies of individual nutrients can substantially reduce vegetative growth and inflorescence yield, although only minor effects were observed in secondary metabolite composition. The onset of individual deficiency symptoms did not always correspond with elemental analysis of foliar tissues. Cultivators should take an integrated approach in diagnosing nutrient deficiencies and take timely corrective actions to optimize productivity and minimize losses to yield and quality.

Comparison of the Cannabinoid and Terpene Profiles in Commercial Cannabis from Natural and Artificial Cultivation

Interest in cultivating cannabis for medical and recreational purposes is increasing due to a dramatic shift in cannabis legislation worldwide. Therefore, a comprehensive understanding of the composition of secondary metabolites, cannabinoids, and terpenes grown in different environmental conditions is of primary importance for the medical and recreational use of cannabis. We compared the terpene and cannabinoid profiles using gas/liquid chromatography and mass spectrometry for commercial cannabis from genetically identical plants grown indoors using artificial light and artificially grown media or outdoors grown in living soil and natural sunlight. By analyzing the cannabinoids, we found significant variations in the metabolomic profile of cannabis for the different environments. Overall, for both cultivars, there were significantly greater oxidized and degraded cannabinoids in the indoor-grown samples. Moreover, the outdoor-grown samples had significantly more unusual cannabinoids, such as C4- and C6-THCA. There were also significant differences in the terpene profiles between indoor- and outdoor-grown cannabis. The outdoor samples had a greater preponderance of sesquiterpenes including β-caryophyllene, α-humulene, α-bergamotene, α-guaiene, and germacrene B relative to the indoor samples.

Ammonium Uptake, Mediated by Ammonium Transporters, Mitigates Manganese Toxicity in Duckweed, Spirodela polyrhiza

Nitrogen is an essential nutrient that affects all aspects of the growth, development and metabolic responses of plants. Here we investigated the influence of the two major sources of inorganic nitrogen, nitrate and ammonium, on the toxicity caused by excess of Mn in great duckweed, Spirodela polyrhiza. The revealed alleviating effect of ammonium on Mn-mediated toxicity, was complemented by detailed molecular, biochemical and evolutionary characterization of the species ammonium transporters (AMTs). Four genes encoding AMTs in S. polyrhiza, were classified as SpAMT1;1, SpAMT1;2, SpAMT1;3 and SpAMT2. Functional testing of the expressed proteins in yeast and Xenopus oocytes clearly demonstrated activity of SpAMT1;1 and SpAMT1;3 in transporting ammonium. Transcripts of all SpAMT genes were detected in duckweed fronds grown in cultivation medium, containing a physiological or 50-fold elevated concentration of Mn at the background of nitrogen or a mixture of nitrate and ammonium. Each gene demonstrated an individual expression pattern, revealed by RT-qPCR. Revealing the mitigating effect of ammonium uptake on manganese toxicity in aquatic duckweed S. polyrhiza, the study presents a comprehensive analysis of the transporters involved in the uptake of ammonium, shedding a new light on the interactions between the mechanisms of heavy metal toxicity and the regulation of the plant nitrogen metabolism.

Too Dense or Not Too Dense: Higher Planting Density Reduces Cannabinoid Uniformity but Increases Yield/Area in Drug-Type Medical Cannabis

A major challenge for utilizing cannabis for modern medicine is the spatial variability of cannabinoids in the plant, which entail differences in medical potency. Since secondary metabolism is affected by environmental conditions, a key trigger for the variability in secondary metabolites throughout the plant is variation in local micro-climates. We have, therefore, hypothesized that plant density, which is well-known to alter micro-climate in the canopy, affects spatial standardization, and concentrations of cannabinoids in cannabis plants. Canopy density is affected by shoot architecture and by plant spacing, and we have therefore evaluated the interplay between plant architecture and plant density on the standardization of the cannabinoid profile in the plant. Four plant architecture modulation treatments were employed on a drug-type medicinal cannabis cultivar, under a density of 1 or 2 plants/m². The plants were cultivated in a naturally lit greenhouse with photoperiodic light supplementation. Analysis of cannabinoid concentrations at five locations throughout the plant was used to evaluate treatment effects on chemical uniformity. The results revealed an effect of plant density on cannabinoid standardization, as well as an interaction between plant density and plant architecture on the standardization of cannabinoids, thus supporting the hypothesis. Increasing planting density from 1 to 2 plants/m² reduced inflorescence yield/plant, but increased yield quantity per area by 28-44% in most plant architecture treatments. The chemical response to plant density and architecture modulation was cannabinoid-specific. Concentrations of cannabinoids in axillary inflorescences from the bottom of the plants were up to 90% lower than in the apical inflorescence at the top of the plant, considerably reducing plant uniformity. Concentrations of all detected cannabinoids in these inflorescences were lower at the higher density plants; however, cannabinoid yield per cultivation area was not affected by neither architecture nor density treatments. Cannabigerolic acid (CBGA) was the cannabinoid least affected by spatial location in the plant. The morpho-physiological response of the plants to high density involved enhanced leaf drying at the bottom of the plants, increased plant elongation, and reduced cannabinoid concentrations, suggesting an involvement of chronic light deprivation at the bottom of the plants. Therefore, most importantly, under high density growth, architectural modulating treatments that facilitate increased light penetration to the bottom of the plant such as "Defoliation", or that eliminated inflorescences development at the bottom of the plant such as removal of branches from the lower parts of the plant, increased chemical standardization. This study revealed the importance of plant density and architecture for chemical quality and standardization in drug-type medical cannabis.