Oxidative Stress, Cytotoxic and Inflammatory Effects of Urban Ultrafine Road-Deposited Dust from the UK and Mexico in Human Epithelial Lung (Calu-3) Cells

Examining the effectiveness of municipal street sweeping in removing road-deposited particles and metal(loid)s of respiratory health concern

Road dust is a demonstrated source of urban air pollution. Given this, the implementation of street sweeping strategies that effectively limit road dust accumulation and resuspension should be a public health priority. Research examining the effectiveness of street sweeping for road dust removal in support of good air quality has been limited to date. To address this, the study aimed to assess the use of a regenerative-air street sweeper to efficiently remove road dust particles and metal(loid)s in size fractions relevant for respiratory exposure in Toronto, Canada. As part of this, the mass amounts, particle size distribution and elemental concentrations of bulk road dust before and after sweeping at five arterial sites were characterized. Sweeping reduced the total mass amount of thoracic-sized (<10 µm) road dust particles by 76 % on average. A shift in the size distribution of remaining particles toward finer fractions was observed in post-sweeping samples, together with an enrichment in many metal(loid)s such as Co, Ti and S. Overall, the mass amounts of metal(loid)s of respiratory health concern like Cu and Zn were greatly reduced with sweeping. Traffic volume and road surface quality were predictors of dust loadings and elemental concentrations. Road surface quality was also found to impact street sweeping efficiencies, with larger mass amounts per unit area collected post-sweeping where street surfaces were distressed. This study demonstrates that street sweeping using advanced technology can be highly effective for road dust removal, highlighting its potential to support air quality improvement efforts. The importance of tailoring sweeping service levels and technologies locally as per the quality of road surface and traffic patterns is emphasized. Continued efforts to mitigate non-exhaust emissions that pose a respiratory health risk at their source is essential.

Higher heavy metal contamination indoors than outdoors during COVID-19 in Mexico City

People spend most of their time indoors, especially during the coronavirus disease. Prolonged exposure to heavy metal-contaminated dust can be harmful to human health. The objectives of this study were to identify the contamination level in outdoor and indoor dust, compare contamination in both environments, and assess the human health risk. Two-hundred thirty-nine samples of dust were taken by Mexico City citizens in 38 homes on the weekends of May 2020. Heavy metal concentrations were measured through XRF. The contamination level was set using the contamination factor with a local and global background value, mixed linear models were used to identify indoor and outdoor differences, and USEPA human health risk methodology was used. Pb, Zn, and Cu had the highest contamination levels, followed by Sr and Mn, using both the local and global background values. The Pb, Zn, and Cu contamination was greater indoors, while higher Mn, Sr, and Fe were detected outdoors. According to the outdoor/indoor ratios, the main sources of Ca, Pb, Zn, and Cu must be indoors, while the main sources of Fe, Mn, Sr, Y, and Ti are outdoors. A human health risk was not detected, as the hazard index was lower than one. However, ailments can be developed due to exposure to Pb, Mn, and Fe in children (hazard index > 0.1). A higher risk due to Pb exposition was found indoors. Indoor environments in Mexico City were more contaminated by heavy metals and represented a higher risk to human health than outdoors during the pandemic isolation.

Measuring magnetic susceptibility of particulate matter collected on filters

The magnetic susceptibility (κ) of particulate matter (PM) is a useful tool in estimation concentration of iron-rich particles and provides useful information on the emission sources and pathways of spread of PM in the atmosphere. However, there is currently no established protocol for measuring the magnetic susceptibility of PM collected on filters used in standard monitoring of PM concentration. This paper presents a step-by-step process for collecting PM on filters in automatic samplers and measuring their κ. The procedure outlines requirements for data quality, measurement uncertainty, exposure time and conditions, and the amount of material collected on the filters. The study analyzed a 2-year dataset of magnetic susceptibility measurements by MFK-1 kappabridge (Agico, Czech Republic) for PM10 and PM2.5 collected at two locations, Warsaw and Cracow, in Poland using low-volume PM samplers. By strictly following the procedure for conditioning filters, measuring magnetic susceptibility and mass of PM, the study found that it is possible to obtain repeatable data with good measurement accuracy and acceptable errors. This makes magnetic susceptibility an additional reliable parameter for tracking of emission sources of iron-rich particles. Successful implementation of this magnetic method as a standard procedure for monitoring PM in addition to the PM mass collected on filters could be used to analyze sources of emission of Fe-particles and their contribution to the PM mass, especially in urban and industrial environments.

Efficacy of green infrastructure in reducing exposure to local, traffic-related sources of airborne particulate matter (PM)

One aim of roadside green infrastructure (GI) is to mitigate exposure to local, traffic-generated pollutants. Here, we determine the efficacy of roadside GI in improving local air quality through the deposition and/or dispersion of airborne particulate matter (PM). PM was collected on both pumped air filters and on the leaves of a recently installed 'tredge' (trees managed as a head-high hedge) at an open road environment next to a primary school in Manchester, U.K. The magnetic properties of PM deposited on leaves and filters (size fractions PM10 and PM2.5) were deduced from hysteresis loops, first-order reversal curves (FORCs), and low-temperature remanence measurements. These were complemented with electron microscopy to identify changes in magnetic PM concentration downwind of the tredge/GI. We show that the tredge is permeable to airflow using a simple CO2 tracer experiment; hence, it allows interception and subsequent deposition of PM on its leaves. Magnetic loadings per m3 of air from filters (PM10 saturation magnetisation, Ms, at 5 K) were reduced by 40 % behind the tredge and a further 63 % in the playground; a total reduction of 78 % compared to roadside air. For the PM2.5 fraction, the reduction in magnetic loading behind the tredge was remarkable (82 %), reflecting efficient diffusional capture of sub-5 nm Fe-oxide particles by the tredge. Some direct mixing of roadside and playground air occurs at the back of the playground, caused by air flow over, and/or through gaps in, the slowly-permeable tredge. The magnetic loading on tredge leaves increased over successive days, capturing ~23 % of local, traffic-derived PM10. Using a heuristic two-dimensional turbulent mixing model, we assess the limited dispersion of PM < 22.5 μm induced by eddies in the tredge wake. This study demonstrates that PM deposition on leaves reduces exposure significantly in this school playground setting; hence, providing a cost-effective mitigation strategy.

Innovative graph analysis method to assess gene expression modulation after fine particles exposures of 3D human airway epithelia

Environmental particles have dramatic consequences for health, especially for the most vulnerable people, such as asthmatics. To better understand the impact on gene expression modulation of fine particles (PM2.5-0.3) from different emission sources, a 3D-airway model, a human bronchial epithelium (MucilAir-HF™) reconstructed from primary cells from healthy (EpiH) or asthmatic (EpiA) donors, was used. Repeated air-liquid exposures were performed, and epithelia were sacrificed to extract RNAs and assess gene expression. Data were analyzed according to the emission sources, physiological status, and exposure doses using a recent model consisting in a graph analysis on pairwise expression ratio. The results were compared with those from the classical ΔΔCt method. The graph analysis method proved to have better statistical properties than the classical ΔΔCt method and demonstrated that repeated PM2.5-0.3 exposures induced a dose-dependent up-regulation of the metabolic gene (CYP1B1) and a down-regulation of the inflammation gene (CXCL10). These modulations were greater for "industrial" than for "urban traffic" fine particles, and the effects were found to be greater after exposure of EpiA than EpiH, thus emphasizing the importance of the epithelium's physiological status in sensitivity to particles. Our study is original in terms of the experimental conditions and the graphical statistical analysis model established. The results highlight the importance of particle chemistry on the modulation of cellular and molecular responses, which may vary according to the individual's vulnerability.

Toxicological Assessment of Particulate and Metal Hazards Associated with Vaping Frequency and Device Age

Electronic nicotine delivery systems (ENDS) aerosols are complex mixtures of chemicals, metals, and particles that may present inhalation hazards and adverse respiratory health risks. Despite being considered a safer alternative to tobacco cigarettes, metal exposure levels and respiratory effects associated with device aging and vaping frequency have not been fully characterized. In this study, we utilize an automated multi-channel ENDS aerosol generation system (EAGS) to generate aerosols from JUUL pod-type ENDS using tobacco-flavored e-liquid. Aerosol puff fractions (1-50) and (101-150) are monitored and sampled using various collection media. Extracted aerosols are prepared for metal and toxicological analysis using human primary small airway epithelial cells (SAEC). ENDS aerosol-mediated cellular responses, including reactive oxygen species (ROS), oxidative stress, cell viability, and DNA damage, are evaluated after 24 h and 7-day exposures. Our results show higher particle concentrations in later puff fractions (0.135 mg/m3) than in initial puff fractions (0.00212 mg/m3). Later puff fraction aerosols contain higher toxic metal concentrations, including chromium, copper, and lead, which elicit increased levels of ROS followed by significant declines in total glutathione and cell viability. Notably, a 30% increase in DNA damage was observed after 7 days because of later puff fraction exposures. This work is consistent with ENDS aerosols becoming more hazardous across the use of pre-filled pod devices, which may threaten respiratory health.