Application of PANI/TiO2 Composite for Photocatalytic Degradation of Contaminants from Aqueous Solution

Biocompatible PANI-Encapsulated Chemically Modified Nano-TiO2 Particles for Visible-Light Photocatalytic Applications

Polyaniline (PANI) constitutes a very propitious conductive polymer utilized in several biomedical, as well as environmental applications, including tissue engineering, catalysis, and photocatalysis, due to its unique properties. In this study, nano-PANI/N-TiO2 and nano-PANI/Ag-TiO2 photocatalytic composites were fabricated via aniline's oxidative polymerization, while the Ag-and N-chemically modified TiO2 nanopowders were synthesized through the sol-gel approach. All produced materials were fully characterized. Through micro-Raman and FT-IR analysis, the co-existence of PANI and chemically modified TiO2 particles was confirmed, while via XRD analysis the composites' average crystallite size was determined as ≈20 nm. The semi-crystal structure of polyaniline exhibits higher photocatalytic efficiency compared to that of other less crystalline forms. The spherical-shaped developed materials are innovative, stable (zeta potential in the range from -26 to -37 mV), and cost-effective, characterized by enhanced photocatalytic efficiency under visible light (energy band gaps ≈ 2 eV), and synthesized with relatively simple methods, with the possibility of recycling and reusing them in potential future applications in industry, in wastewater treatment as well as in biomedicine. Thus, the PANI-encapsulated Ag and N chemically modified TiO2 nanocomposites exhibit high degradation efficiency towards Rhodamine B dye upon visible-light irradiation, presenting simultaneously high biocompatibility in different normal cell lines.

Preparation of PANI modified TiO2 and characterization under pre- and post- photocatalytic conditions

Polyaniline (PANI) is a promising conducting polymer for surface modification of TiO2 to overcome limitations of the use of visible light and attain increased photocatalytic efficiency for the removal of organic contaminants. In this study, a series of polyaniline modified TiO2 (PANI-TiO2) composites were prepared by using "in-situ" chemical oxidation polymerization method. The composites were systematically characterized by Fourier transform infrared spectroscopy (equipped with an attenuated total reflection accessory, FTIR-ATR), Raman spectroscopy, X-ray diffractometry (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDAX), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL), nitrogen (N2) physisorption (Brunauer - Emmett - Teller surface area (SBET) and Barrett-Joyner-Halenda (BJH) pore size analysis), thermogravimetry-derivative thermogravimetry (TG-DTG) techniques. XRD patterns of PANI-TiO2 composites confirmed both the amorphous phase of PANI and the crystalline character of TiO2. TG/DTG analysis complemented the XRD profiles that the interactions between PANI and TiO2 resulted in a more stable PANI-TiO2 matrix. SEM images displayed the dominant morphology as dandelion-like shapes of PANI being more pronounced with increasing PANI ratios in PANI-TiO2 composites. UV-DRS profiles revealed that the band gap energies of the composites were lower than bare TiO2 expressing a shift to the visible light region. Both PL and UV-DRS analyses confirmed the band-gap reduction phenomenon of PANI modification of TiO2. The incorporation of PANI into TiO2 resulted in a reduction of the surface area of TiO2. The composites were subsequently subjected to photocatalytic activity assessment tests using humic acid (HA) as a model of refractory organic matter (RfOM) under simulated solar irradiation (Uyguner-Demirel et al. Environ Sci Pollut Res 30 85626-85638, 2023). The morphological and structural changes attained upon application of photocatalysis were also evaluated by FTIR-ATR, Raman spectroscopy, XRD, and SEM-EDAX methods in a comparable manner. The FTIR-ATR spectral features of PANI, RfOM and all composites displayed peaks with slight shifts under pre- and post- photocatalytic conditions as well as following dark surface interactions. Besides exhibiting noticeable photocatalytic performance, PANI-TiO2 composites were also proven to maintain stability under non-selective oxidation conditions in the presence of a complex organic matrix. The prepared PANI-TiO2 composites overcoming the limitations of UVA light active bare TiO2 photocatalysis could possibly find a beneficial use as potential catalysts in solar photocatalytic applications.

Photocatalytic performance of PANI modified TiO2: Degradation of refractory organic matter

Surface modification of TiO2 with polyaniline (PANI) conducting polymer has been used to achieve visible light photoresponse, thereby increasing solar photocatalytic activity. In this study, photocatalytic performances of PANI-TiO2 composites with different mole ratios were synthesized by the in situ chemical oxidation polymerization method and tested for the degradation of a model refractory organic matter (RfOM), namely humic acid in an aqueous medium under simulated solar irradiation in a comparative manner. Adsorptive interactions under dark conditions and interactions under irradiation were investigated as contributing factors to photocatalysis. Degradation of RfOM was monitored in terms of UV-vis parameters (Color436, UV365, UV280, and UV254) and fluorescence spectroscopic parameters as well as the mineralization extent by dissolved organic carbon contents. The presence of PANI exerted an enhancement in photocatalytic degradation efficiency compared to pristine TiO2. The synergistic effect was more pronounced in lower PANI ratios whereas higher PANI ratios reflected a retardation effect. Degradation kinetics were assessed by pseudo-first-order kinetic model. For all UV-vis parameters analyzed, highest and lowest rate constants (k) were attained in the presence of PT-14 (2.093 × 10-2 to 2.750 × 10-2 min-1) and PT-81 (5.47 × 10-3 to 8.52 × 10-3 min-1), respectively. Variations in selected absorbance quotients, i.e., A254/A436, A280/A436, and A253/A203, were distinctive and compared with respect to irradiation time and photocatalyst type. Upon use of PT-14, a steady decreasing profile with respect to irradiation time was attained for A253/A203 quotient as 0.76-0.61, followed by a rapid decrease to 0.19 in 120 min. The incorporation effect of PANI into TiO2 composite could be visualized in A280/A365 and A254/A365 quotients exhibiting an almost constant and parallel trend. As a general trend, decrease in the major fluorophoric intensity FIsyn,470 with photocatalysis was observed under extended irradiation conditions; however, an abrupt decline was remarkable in the presence of PT-14 and PT-18. Fluorescence intensity decrease correlated well with spectroscopic evaluation of rate constants. A thorough evaluation of spectroscopic parameters of UV-vis and fluorescence can provide significant information for practical applications in control of RfOM in water treatment.

Functional impacts of polyaniline in composite matrix of photocatalysts: an instrumental overview

The challenges associated with photocatalysts including their agglomeration, electron-hole recombination and limited optoelectronic reactivity to visible light during the photocatalysis of dye-laden effluent make it necessary to fabricate versatile polymeric composite photocatalysts, and in this case the incredibly reactive conducting polyaniline can be employed. The selection of polyaniline among the conducting polymers is based on its proficient functional impacts in composite blends and proficient synergism with other nanomaterials, especially semiconductor catalysts, resulting in a high photocatalytic performance for the degradation of dyes. However, the impacts of PANI in the composite matrix, which result in the desired photocatalytic activities, can only be assessed using multiple characterization techniques, involving both microscopic and spectroscopic assessment. The characterization results play a significant role in the detection of possible points of agglomeration, surface tunability and improved reactivity during the fabrication of composites, which are necessary to improve their performance in the photocatalysis of dyes. Accordingly, studies revealed the functional impacts of polyaniline in composites including morphological transformation, improved surface functionality, reduction in agglomeration and lowered bandgap potential employing different characterization techniques. In this review, we present the most proficient fabrication techniques based on the in situ approach to achieve improved functional and reactive features and efficiencies of 93, 95, 96, 98.6 and 99% for composites in dye photocatalysis.

Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites

Water pollution by organic dyes, and its remediation, is an important environmental issue associated with ever-increasing scientific interest. Conducting polymers have recently come to the forefront as advanced agents for removing dye. The present review reports on the progress represented by the literature published in 2020-2022 on the application of conducting polymers and their composites in the removal of dyes from aqueous media. Two composites, incorporating the most important polymers, polyaniline, and polypyrrole, have been used as efficient dye adsorbents or photocatalysts of dye decomposition. The recent application trends are outlined, and future uses also exploiting the electrical and electrochemical properties of conducting polymers are offered.

Photocatalytic nanohybrid membranes for highly efficient wastewater treatment: A comprehensive review

Wastewater is inevitably generated from human activities as part of the life cycle chain that potentially damages the environment. The integration of photocatalytic reaction and membrane separation for wastewater treatment has gained great attention in recent studies. However, there are still many technical limitations for its application such as toxic metal release, catalyst deactivation, fouling/biofouling, polymer disintegration, and separation performance decline. Different types, combinations, and modifications of photocatalysts material combined with membranes such as semiconductor metal oxides, binary/ternary hybrid metal oxides, elemental doped semiconductors, and metal-organic frameworks (MOFs) for improving the performance and compatibility are presented and discussed. The strategies of incorporating photocatalysts into membrane matrix for pursuing the most stable membrane integrity, high photocatalytic efficiency, and excellent perm-selectivity performance in the very recent studies were discussed. This review also outlines the performance enhancement of photocatalytic membranes (PMs) in wastewater treatment and its potential for water reclamation. Photocatalysts enhanced membrane separation by inducing anti-fouling and self-cleaning properties as well as antibacterial activity. Based on the reviewed study, PMs are possible to achieve complete removal of emerging contaminants and ∼99% reduction of bacterial colony that leading on the zero liquid discharge (ZLD). However, the intensive exposure of photo-induced radicals potentially damages the polymeric membrane. Therefore, future studies should be focused on fabricating chemically stable host-membrane material. Moreover, the light source and the membrane module design for the practical application by considering the hydrodynamic and cost-efficiency should be a concern for technology diffusion to the industrial-scale application.

Role of polyaniline in accomplishing a sustainable environment: recent trends in polyaniline for eradicating hazardous pollutants

Attaining a sustainable environment has become a prime area of research interest, as it is an utmost necessity for a healthy life. Hence, ample studies have been carried out in adopting different processes and utilizing various materials to attain the goal. Herein, we present an exclusive discussion on one such material, i.e., polyaniline (PANI) and its derivatives. Being an intrinsic conducting type, it has grabbed more attention due to its durability in different doped/un-doped states, promptness in structural alteration, and solution processability. This review presents an exhaustive discussion on published reports showing utilization of PANI and its derivative in various forms like pure and composites, for cleaning the environment through adsorption, photodegradation, etc., and the various methods adopted in order to achieve an optimum operating condition to obtain the maximum outcome. In addition to these merits and demerits, various technical challenges faced with materials have been also presented. Therefore, it is expected that this piece of work, presenting the exhaustive discussion on PANI and; its derivatives would help to develop a better understanding of this excellent conducting polymer PANI and provide a state of art on the role of this material for attaining sustainable surroundings for the living beings.

Conductive polymer layered semiconductor for degradation of triclopyr acid and 2,4-dichlorophenoxyacetic acid from aqueous stream using coalesce adsorption-photocatalysis technique

Polyaniline supported titanium dioxide nanoparticles (PTs) were fabricated using chemical oxidative aniline polymerization in the presence of titanium dioxide with ammonium peroxydisulfate as an oxidant. The synthesized PTs were thoroughly characterized for their morphological and functional features. PTs were employed for the photodegradation of acidic herbicides; 2,4-dichlorophenoxyacetic acid (2,4-D) and triclopyr acid (TCP). PT's surface modifications were imparted and their herbicide removal efficiencies were compared. The best operating conditions for adsorption/photocatalysis were 0.5 g/L photocatalyst, 10 mg/L concentration of individual herbicides resulted in 90.72% removal of TCP at pH 4 and 99.91% removal of 2,4-D at pH 5. Adsorption kinetics of herbicides, onto PT-1 showed the equilibrium attainment within 30 min and experimental data obeyed pseudo-second order model for TCP and 2,4-D removal which was governed by chemisorption. Analysis of TCP and 2,4-D adsorption indicated that the removal followed Sips model for TCP removal while Redlich-Peterson model explained the removal of 2,4-D by PT-1. Rate constants indicated that the amount of TiO₂ in the PTs played an important role in removing the herbicides and PT-1 material excellent remarkable activity for three cycles of photodegradation. Thus, this work reports the polymerization of aniline onto TiO₂ and their utility as photocatalyst for the expulsion of 2,4-D and TCP from water.

Banana Peel and Conductive Polymers-Based Flexible Supercapacitors for Energy Harvesting and Storage

Flexible supercapacitors are highly demanding due to their wearability, washability, lightweight property and rollability. In this paper, a comprehensive review on flexible supercapacitors based on conductive polymers such as polypyrrole (PPy), polyaniline (PANI) and poly(3,4-ethylenedioxtthiophne)-polystyrene sulfonate (PEDOT:PSS). Methods of enhancing the conductivity of PEDOT:PSS polymer using various composites and chemical solutions have been reviewed in detail. Furthermore, supercapacitors based on carbonized banana peels and methods of activation have been discussed in point. This review covers the up-to-date progress achieved in conductive polymer-based materials for supercapacitor electrodes. The effect of various composites with PEDOT:PSS have been discussed. The review result indicated that flexible, stretchable, lightweight, washable, and disposable wearable electronics based on banana peel and conductive polymers are highly demanding.

An Overview of Polymer-Supported Catalysts for Wastewater Treatment through Light-Driven Processes

In recent years, alarm has been raised due to the presence of chemical contaminants of emerging concern (CECs) in water. This concern is due to the risks associated with their exposure, even in small amounts. These complex compounds cannot be removed or degraded by existing technologies in wastewater treatment plants. Therefore, advanced oxidation processes have been studied, with the objective of developing a technology capable of complementing the conventional water treatment plants. Heterogenous photocatalysis stands out for being a cost-effective and environmentally friendly process. However, its most common form (with suspended catalytic particles) requires time-consuming and costly downstream processes. Therefore, the heterogeneous photocatalysis process with a supported catalyst is preferable. Among the available supports, polymeric ones stand out due to their favorable characteristics, such as their transparency, flexibility and stability. This is a relatively novel process; therefore, there are still some gaps in the scientific knowledge. Thus, this review article aims to gather the existing information about this process and verify which questions are still to be answered.