Can Encapsulation of the Biocide DCOIT Affect the Anti-Fouling Efficacy and Toxicity on Tropical Bivalves?

Adults of Sun Coral Tubastraea coccinea (Lesson 1829) Are Resistant to New Antifouling Biocides

Biocides used in antifouling (AF) paints, such as 4,5-dichlorine-2-n-octyl-4-isothiazole-3-one (DCOIT), can gradually leach into the environment. Some AF compounds can persist in the marine environment and cause harmful effects to non-target organisms. Nanoengineered materials, such as mesoporous silica nanocapsules (SiNCs) containing AF compounds, have been developed to control their release rate and reduce their toxicity to aquatic organisms. This study aimed to evaluate the acute toxicity of new nanoengineered materials, SiNC-DCOIT and a silver-coated form (SiNC-DCOIT-Ag), as well as the free form of DCOIT and empty nanocapsules (SiNCs), on the sun coral Tubastraea coccinea. T. coccinea is an invasive species and can be an alternative test organism for evaluating the risks to native species, as most native corals are currently threatened. The colonies were collected from the Alcatrazes Archipelago, SP, Brazil, and acclimatized to laboratory conditions. They were exposed for 96 h to different concentrations of the tested substances: 3.33, 10, 33, and 100 µg L-1 of free DCOIT; 500, 1000, 2000, and 4000 µg L-1 of SiNC; and 74.1, 222.2, 666.7, and 2000 µg L-1 of SiNC-DCOIT and SiNC-DCOIT-Ag. The test chambers consisted of 500 mL flasks containing the test solutions, and the tests were maintained under constant aeration, a constant temperature of 23 ± 2 °C, and photoperiod of 12 h:12 h (light/dark). At the end of the experiments, no lethal effect was observed; however, some sublethal effects were noticeable, such as the exposure of the skeleton in most of the concentrations and replicates, except for the controls, and embrittlement at higher concentrations. Adults of T. coccinea were considered slightly sensitive to the tested substances. This resistance may indicate a greater capacity for proliferation in the species, which is favored in substrates containing antifouling paints, to the detriment of the native species.

Water and sediment toxicity and hazard assessment of DCOIT towards neotropical marine organisms

DCOIT is an effective antifouling biocide, which presence in the environment and toxicity towards non-target species has been generating great concern. This study evaluated the waterborne toxicity of DCOIT on marine invertebrates (i.e., survival of brine shrimp Artemia sp., larval development of the sea urchin Echinometra lucunter and the mussel Perna perna), as well as DCOIT-spiked-sediment toxicity on the fecundity rate of the copepod Nitrocra sp. And the mortality of the amphipod Tiburonella viscana. The data outcomes were used to calculate environmental hazards and risks, which were compared to their corresponding values obtained from temperate regions. Waterborne toxicity can be summarized as follows: Artemia sp. (LC_50-48h = 163 (135-169) μg/L), E. lucunter (EC_50-36h = 33.9 (17-65) μg/L), and P. perna (EC_50-48h = 8.3 (7-9) μg/L). For whole-sediment toxicity, metrics were calculated for T. viscana (LC_50-10d = 0.5 (0.1-2.6) μg/g) and Nitrocra sp, (EC_50-10d = 200 (10-480) μg/kg). The DCOIT hazard was assessed for both tropical and non-tropical pelagic organisms. The predicted no-effect concentration (PNEC) for tropical species (0.19 μg/L) was 1.7-fold lower than that for non-tropical organisms (0.34 μg/L). In whole-sediment exposures, DCOIT presented a PNEC of 0.97 μg/kg, and the risk quotients (RQs) were >1 for areas with constant input of DCOIT such as ports ship/boatyards, marinas, and maritime traffic zones of Korea, Japan, Spain, Malaysia, Indonesia, Vietnam, and Brazil. The presented data are important for supporting the establishment of policies and regulations for booster biocides worldwide.

Toxicological signature for thyroid endocrine disruption of dichlorooctylisothiazolinone in zebrafish larvae

Dichlorooctylisothiazolinone (DCOIT), which is one of the isothiazolinone preservatives, is applied to water-based adhesives in food packaging. This study investigated the effects of DCOIT on the embryonic growth and thyroid endocrine system using zebrafish. Organism-level (hatchability, survival, and growth), hormone-level (triiodothyronine (T3) and thyroxine (T4)), gene-level (genes associated with the hypothalamus-pituitary-thyroid axis), and microRNA-level (microRNAs related to thyroid endocrine disruption) endpoints were measured. Significant rise in embryonic coagulation and delayed hatching (≥0.3 μg/L), and decreased larval length (30 μg/L) were observed in fish exposed to DCOIT. Lower contents of T3 and T4 were observed after exposure to DCOIT, which was accompanied by the upregulation of genes associated with the thyrotropin releasing hormone and thyroid stimulating hormone and the downregulation of genes associated with the thyroid hormone receptors and deiodination. Strong influence of DCOIT on dre-miR-193b and -499 may be a critical mechanism to inhibit transcription of trαa and trβ, which in turn may affect thyroid hormones and development of the organism. Our findings suggest that hypothyroidism induced by the exposure to DCOIT is potentially associated with genetic and microRNA-level changes, which eventually affects development.

Antifouling coatings can reduce algal growth while preserving coral settlement

In the early stages after larval settlement, coral spat can be rapidly overgrown and outcompeted by algae, reducing overall survival for coral reef replenishment and supply for restoration programs. Here we investigated three antifouling (AF) coatings for their ability to inhibit algal fouling on coral settlement plugs, a commonly-used restoration substrate. Plugs were either fully or partially coated with the AF coatings and incubated in mesocosm systems with partial recirculation for 37 days to track fouling succession. In addition, settlement of Acropora tenuis larvae was measured to determine whether AF coatings were a settlement deterrent. Uncoated control plugs became heavily fouled, yielding only 4–8% bare substrate on upper surfaces after 37 days. During this period, an encapsulated dichlorooctylisothiazolinone (DCOIT)-coating was most effective in reducing fouling, yielding 61–63% bare substrate. Antiadhesive and cerium dioxide (CeO_2−x) nanoparticle (NP) coatings were less effective, yielding 11–17% and 2% bare substrate, respectively. Average settlement of A. tenuis larvae on the three types of AF-coated plugs did not statistically differ from settlement on uncoated controls. However, settlement on the NP-coating was generally the highest and was significantly higher than settlement found on the antiadhesive- and DCOIT-coating. Furthermore, on plugs only partially-covered with AF coatings, larval settlement on coated NP- areas was significantly higher than settlement on coated antiadhesive- and DCOIT-areas. These results demonstrate that AF coatings can reduce fouling intensity on biologically-relevant timescales while preserving robust levels of coral settlement. This represents an important step towards reducing fine-scale competition with benthic fouling organisms in coral breeding and propagation.

Biocides and techniques for their encapsulation: a review

Biocides are compounds that are broadly used to protect products and equipment against microbiological damage. Encapsulation can effectively increase physicochemical stability and allow for controlled release of encapsulated biocides. We categorized microencapsulation into coacervation, sol-gel, and self-assembly methods. The former comprises internal phase separation, interfacial polymerization, and multiple emulsions, and the latter include polymersomes and layer-by-layer techniques. The focus of this review is the description of these categories based on their microencapsulation methods and mechanisms. We discuss the key features and potential applications of each method according to the characteristics of the biocide to be encapsulated, relating the solubility of biocides to the capsule-forming materials, the reactivity between them and the desired release rate. The role of encapsulation in the safety and toxicity of biocide applications is also discussed. Furthermore, future perspectives for biocide applications and encapsulation techniques are presented.

Biocide vs. Eco-Friendly Antifoulants: Role of the Antioxidative Defence and Settlement in Mytilus galloprovincialis

Antifoulant paints were developed to prevent and reduce biofouling on surfaces immersed in seawater. The widespread use of these substances over the years has led to a significant increase of their presence in the marine environment. These compounds were identified as environmental and human threats. As a result of an international ban, research in the last decade has focused on developing a new generation of benign antifoulant paints. This review outlines the detrimental effects associated with biocide versus eco-friendly antifoulants, highlighting what are effective antifoulants and why there is a need to monitor them. We examine the effects of biocide and eco-friendly antifoulants on the antioxidative defence mechanism and settlement in a higher sessile organism, specifically the Mediterranean mussel, Mytilus galloprovincialis. These antifoulants can indirectly assess the potential of these two parameters in order to outline implementation of sustainable antifoulants.

"Smart" nanosensors for early detection of corrosion: Environmental behavior and effects on marine organisms

Corrosion is an environmental and economic global problem. "Smart" or stimuli-responsive colorimetric nanosensors for maritime coatings have been proposed as an asset to overcome the limitations of the current monitoring techniques by changing color in the presence of triggers associated with the early stages of corrosion. Layered double hydroxides (Zn-Al LDH; Mg-Al LDH) and silica mesoporous nanocapsules (SiNC) were used as precursor nanocarriers of active compounds: hexacyanoferrate ions ([Fe(CN)₆]^3-) and phenolphthalein (PhPh), respectively. Additionally, the safer-by-design principles were employed to optimize the nanosensors in an eco-friendly perspective (e.g., regular vs. warm-washed SiNC-PhPh; immobilization using different carriers: Zn-Al LDH-[Fe(CN)₆]^3- vs. Mg-Al LDH-[Fe(CN)₆]^3-). Therefore, the present study aims to assess the environmental behavior in saltwater and the toxic effects of the nanosensors, their nanocarriers, and the active compounds on the marine microalgae Tetraselmis chuii and the crustacean Artemia salina. Briefly, tested compounds exhibited no acute toxic effects towards A. salina (NOEC = 100 mg/L), apart from SiNC-PhPh (LC₅₀ = 2.96 mg/L) while tested active compounds and nanosensors caused significant growth inhibition on T. chuii (lowest IC₅₀ = 0.40 mg/L for SiNC-PhPh). The effects of [Fe(CN)₆]^3- were similar regardless of the nanocarrier choice. Regarding SiNC-PhPh, its toxicity can be decreased at least twice by simply reinforcing the nanocapsules washing, which contributes to the removal (at least partially) of the surfactants residues. Thus, implementing safe-by-design strategies in the early stages of research proved to be critical, although further progress is still needed towards the development of truly eco-friendly nanosensors.

Toxicity of innovative antifouling additives on an early life stage of the oyster Crassostrea gigas: short- and long-term exposure effects

Recent advances in nanotechnology have allowed the encapsulation of hazardous antifouling (AF) biocides in silica mesoporous nanocapsules (SiNC) reducing their short-term toxicity. However, the chronic effects of such novel nanoadditives remain understudied. The present study aimed to assess short- and long-term sub-lethal effects of soluble forms (DCOIT and Ag) and nanostructured forms (SiNC-DCOIT and SiNC-DCOIT-Ag) of two AF biocides and the "empty" nanocapsule (SiNC) on juveniles of Crassostrea gigas after 96 h and 14 days of exposure. Juvenile oysters exposed for a short period to free DCOIT and AgNO₃ presented worse physiological status comparing with those exposed to the nanostructured forms. The long-term exposure to DCOIT and Ag⁺ caused an extensive biochemical impairment comparing with the tested nanomaterials, which included oxidative damage, activation of the antioxidant defense system, and neurotransmission impairment. Despite the negative effects mostly observed on the health condition index and AChE, the encapsulation of the abovementioned AF biocides into SiNC seems to be a technological advantage towards the development of AF nanoadditives with lower long-term toxicity comparing with the soluble forms of such biocides.

Can the toxicity of polyethylene microplastics and engineered nanoclays on flatfish (Solea senegalensis) be influenced by the presence of each other?

Microplastics and nanomaterials are applied in a myriad of commercial and industrial applications. When leaked to natural environments, such small particles might threaten living organisms' health, particularly when considering their potential combination that remains poorly investigated. This study investigated the physiological and biochemical effects of polyethylene (PE; 64-125 μm in size, 0.1, 1.0, and 10.0 mg·L^-1) single and combined with an engineered nanomaterial applied in antifouling coatings, the copper-aluminium layered double hydroxides (Cu-Al LDH; 0.33, 1.0, and 3.33 mg·L^-1) in the flatfish Solea senegalensis larvae (8 dph) after 3 h exposure, in a full factorial design. Particles ingestion, histopathology, and biochemical biomarkers were assessed. Fish larvae presented <1 PE particles in their gut, independently of their concentration in the medium. The histological health index showed minimal pathological alterations at PE combined exposure, with a higher value observed at 1 mg LDH·L^-1 × 0.1 mg PE·L^-1. Gut deformity and increased antioxidant defences (catalase), neurotransmission (acetylcholinesterase), and aerobic energy production (electron transport system) were observed at PE ≥ 1.0 mg·L^-1. No oxidative damage (lipid peroxidation) or alterations in the detoxification capacity (glutathione-S-transferase) was observed on single and combined exposures. PE, combined or not with Cu-Al LDH, does not seem to compromise larvae's homeostasis considering levels reported so far in the marine and aquaculture environments. However, harsh effects are expected with MP contamination rise, as projections suggest.

Use of Nanotechnology to Mitigate Biofouling in Stainless Steel Devices Used in Food Processing, Healthcare, and Marine Environments

In humid environments, the formation of biofilms and microfouling are known to be the detrimental processes that first occur on stainless steel surfaces. This is known as biofouling. Subsequently, the conditions created by metabolites and the activity of organisms trigger corrosion of the metal and accelerate corrosion locally, causing a deterioration in, and alterations to, the performance of devices made of stainless steel. The microorganisms which thus affect stainless steel are mainly algae and bacteria. Within the macroorganisms that then damage the steel, mollusks and crustaceans are the most commonly observed. The aim of this review was to identify the mechanisms involved in biofouling on stainless steel and to evaluate the research done on preventing or mitigating this problem using nanotechnology in humid environments in three areas of human activity: food manufacturing, the implantation of medical devices, and infrastructure in marine settings. Of these protective processes that modify the steel surfaces, three approaches were examined: the use of inorganic nanoparticles; the use of polymeric coatings; and, finally, the generation of nanotextures.

Effects of nanostructure antifouling biocides towards a coral species in the context of global changes

Biofouling prevention is one of the biggest challenges faced by the maritime industry, but antifouling agents commonly impact marine ecosystems. Advances in antifouling technology include the use of nanomaterials. Herein we test an antifouling nano-additive based on the encapsulation of the biocide 4,5-dichloro-2-octyl-4-isothiazolin-3-one (DCOIT) in engineered silica nanocontainers (SiNC). The work aims to assess the biochemical and physiological effects on the symbiotic coral Sarcophyton cf. glaucum caused by (1) thermal stress and (2) DCOIT exposure (free or nanoencapsulated forms), in a climate change scenario. Accordingly, the following hypotheses were addressed: (H1) ocean warming can cause toxicity on S. cf. glaucum; (H2) the nanoencapsulation process decreases DCOIT toxicity towards this species; (H3) the biocide toxicity, free or encapsulated forms, can be affected by ocean warming. Coral fragments were exposed for seven days to DCOIT in both free and encapsulated forms, SiNC and negative controls, under two water temperature regimes (26 °C and 30.5 °C). Coral polyp behavior and photosynthetic efficiency were determined in the holobiont, while biochemical markers were assessed individually in the endosymbiont and coral host. Results showed transient coral polyp retraction and diminished photosynthetic efficiency in the presence of heat stress or free DCOIT, with effects being magnified in the presence of both stressors. The activity of catalase and glutathione-S-transferase were modulated by temperature in each partner of the symbiosis. The shifts in enzymatic activity were more pronounced in the presence of free DCOIT, but to a lower extent for encapsulated DCOIT. Increased levels of oxidative damage were detected under heat conditions. The findings highlight the physiological constrains elicited by the increase of seawater temperature to symbiotic corals and demonstrate that DCOIT toxicity can be minimized through encapsulation in SiNC. The presence of both stressors magnifies toxicity and confirm that ocean warming enhances the vulnerability of tropical photosynthetic corals to local stressors.