Five-Membered Cyclic Carbonates: Versatility for Applications in Organic Synthesis, Pharmaceutical, and Materials Sciences

Mixed-Linker Zr-Metal-Organic Framework with Improved Lewis Acidic Sites for CO2 Fixation Reaction Catalysis

Applying the mixed-linker strategy in synthesizing metal-organic frameworks (MOFs) has drawn considerable attention as a heterogeneous catalyst owing to their easy synthesis and different functional ligands in their frameworks. Following this strategy, we have developed a mixed linker Zr(IV)-based MOF, [Zr6O4(OH)4(FUM)n(PZDC-NO2)6-n] (PZDC-NO2 = 4-nitro-3,5-pyrazoledicarboxylic acid, FUM = fumaric acid) denoted as MOF-801(PZDC-NO2) synthesized via this strategy which possess an electron-withdrawing group (-NO2) on secondary linkers. The MOF-801(PZDC-NO2) has been fully characterized via various analyses, such as Fourier transform infrared, powder X-ray diffraction, 13C/1H nuclear magnetic resonance, XPS, TGA, and N2 adsorption/desorption, SEM, EDX, etc. By considering the concurrent existence of acid-base active sites and the synergistic role of these sites, this mixed-linker MOF was used as a catalyst for the cycloaddition reaction of CO2 and epoxides under mild without-solvent conditions. MOF-801(PZDC-NO2) displays significant catalytic performance by producing the highest catalytic conversion of epoxide to cyclic carbonate (93%) with a turnover number of 130.7 in 8 h reaction time and 100 °C temperature under low-pressure CO2 pressure. The mixed-linker Zr-MOF exhibits exceptional stability and reusability, maintaining its structure and functionality after consecutive cycles of utilization. Finally, the reaction mechanism was further investigated by density functional theory calculations. The total energy of the reactants, intermediates, and products involved in the process.

Iron(III) Complexes with Pyridine Group Coordination and Dissociation Reversible Equilibrium: Cooperative Activation of CO2 and Epoxides into Cyclic Carbonates

Herein, a series of [ONSN]-type iron(III) complexes were synthesized. A binary catalytic system in combination with iron complexes and tetrabutylammonium bromide (TBAB) exhibited high activity for the synthesis of cyclic carbonates from CO2 (1 atm) and terminal epoxides at room temperature. Additionally, single-component iron complexes without using additional TBAB as nucleophiles also showed high activity for the cycloaddition of CO2 and terminal epoxides under 80 °C and 0.5 MPa of CO2. This study demonstrates that single-component iron catalysts provide a competitive alternative to binary catalytic systems for the synthesis of cyclic carbonates from CO2 and epoxides. Mechanistic studies on a single-component iron catalytic system suggest that the temperature serves as a role of responsive switch for controlling the coordination and dissociation of pyridine bearing iron catalysts detected using in situ infrared spectroscopy, and uncoordinated pyridine activates CO2 to form carbamate. Studies of electrospray ionization high-resolution mass spectrometry reveal that an iron center was used as a Lewis acidic site, free halogen anions from the iron center were used as a nucleophilic site, and coordinated pyridine was released from iron complexes to activate CO2.

Binary and Halide-free Catalyst Systems Based on Al/Ga/In Aminopyridylbisphenolate Complexes for the Cycloaddition of Epoxides and CO2

Group 13 complexes bearing an aminopyridylbisphenol ligand have been prepared [ML-X; L = ligand, M = Al (X = Cl and Br), Ga (X = Cl, Br, and I), or In (X = Cl)]. The structures of the complexes containing the chloride ligand (ML-Cl; M = Al, Ga, and In) have been directly compared through an X-ray crystallography study, with differences in the monomeric or dimeric nature of their structures observed. All of the complexes obtained have been studied as potential catalysts for the synthesis of cyclic carbonates from epoxides and CO2. It has been found that the indium complex, as part of a traditional binary catalyst system (catalyst + tetra-butylammonium halide cocatalyst), displays the highest catalytic activity and is active under rather mild reaction conditions (balloon pressure of CO2). Meanwhile, it has been found that the GaL-I complex is a competent single-component catalyst (no need for addition of a cocatalyst) at more elevated reaction temperatures and pressures. A full substrate scope has been performed with both developed catalyst systems to demonstrate their applicability. In addition to the experimental results, a density functional theory study was performed on both catalyst systems. These results explain both why the indium catalyst is the most active under binary catalyst system conditions and how the gallium catalyst with an iodide (GaL-I) is able to act as a single-component catalyst in contrast to the indium-based complex.

Non-Isocyanate Synthesis of Aliphatic Polyurethane by BiCl3-Catalyzed Transurethanization Polycondensation

Non-isocyanate polyurethane synthesis by non-Sn catalysis is an essential challenge toward green polyurethane synthesis. Bismuth compounds are attractive candidates due to their low cost, low toxicity, and availability to urethane chemistry. This work applied various Bi catalysts to the self-polycondensation of a bishydroxyurethane monomer and found BiCl3 to be an excellent catalyst through optimization. The catalytic activity and price of BiCl3 are comparable to those of Bu2SnO, while its toxicity is significantly low. BiCl3 is, therefore, a promising alternative to Sn-based catalysts in non-isocyanate polyurethane synthesis.

Group 13 salphen compounds (In, Ga and Al): a comparison of their structural features and activities as catalysts for cyclic carbonate synthesis

Many complexes based on group 13 elements have been successfully applied as catalysts for the synthesis of cyclic carbonates from epoxides and CO₂ and to date these have provided some of the most active catalysts developed. It is notable that most reports have focused on the use of aluminium-based compounds likely because of the well-established Lewis acidity of this element and its cost. In comparison, relatively little attention has been paid to the development of catalysts based on the heavier group 13 elements, despite their known Lewis acidic properties. This study describes the synthesis of aluminium, gallium and indium compounds supported by a readily prepared salphen ligand and explores both their comparative structures and also their potential as catalysts for the synthesis of cyclic carbonates. In addition, the halide ligand which forms a key part of the compound has been systematically varied and the effect of this change on the structure and catalytic activity is also discussed. It is demonstrated that the indium compounds are actually, and unexpectedly, the most active for cyclic carbonate synthesis, despite their lower Lewis acidity when compared to their aluminium congeners. The experimental observations from this work are fully supported by a Density Functional Theory (DFT) study, which provides important insights into the reasons as to why the indium catalyst with bromide, [InBr(salphen)], is most active.

Deep Eutectic Solvents as Catalysts for Cyclic Carbonates Synthesis from CO2 and Epoxides

In recent years, the chemical industry has put emphasis on designing or modifying chemical processes that would increasingly meet the requirements of the adopted proecological sustainable development strategy and the principles of green chemistry. The development of cyclic carbonate synthesis from CO₂ and epoxides undoubtedly follows this trend. First, it represents a significant improvement over the older glycol phosgenation method. Second, it uses renewable and naturally abundant carbon dioxide as a raw material. Third, the process is most often solvent-free. However, due to the low reactivity of carbon dioxide, the process of synthesising cyclic carbonates requires the use of a catalyst. The efforts of researchers are mainly focused on the search for new, effective catalysts that will enable this reaction to be carried out under mild conditions with high efficiency and selectivity. Recently, deep eutectic solvents (DES) have become the subject of interest as potential effective, cheap, and biodegradable catalysts for this process. The work presents an up-to-date overview of the method of cyclic carbonate synthesis from CO₂ and epoxides with the use of DES as catalysts.

Porous organic polymers for CO2 capture, separation and conversion

Porous organic polymers (POPs) have long been considered as prime candidates for carbon dioxide (CO2) capture, separation, and conversion. Especially their permanent porosity, structural tunability, stability and relatively low cost are key factors in such considerations. Whereas heteratom-rich microporous networks as well as their amine impregnation/functionalization have been actively exploited to boost the CO2 affinity of POPs, recently, the focus has shifted to engineering the pore environment, resulting in a new generation of highly microporous POPs rich in heteroatoms and featuring abundant catalytic sites for the capture and conversion of CO2 into value-added products. In this review, we aim to provide key insights into structure-property relationships governing the separation, capture and conversion of CO2 using POPs and highlight recent advances in the field.

Nitrene-Mediated C-H Oxygenation: Catalytic Enantioselective Formation of Five-Membered Cyclic Organic Carbonates

The synthesis of non-racemic 5-membered cyclic carbonates from abundant alcohols is reported. Conversion of the alcohol into an azanyl carbonate is followed by a chiral-at-ruthenium catalyzed cyclization to provide chiral cyclic carbonates in yields of up to 95 % and with up to 99 % ee. This new synthetic method is proposed to proceed through a nitrene-mediated intramolecular C(sp³ )-H oxygenation which includes an unusual 1,7-hydrogen atom transfer within a ruthenium nitrene intermediate. The method is applicable to the synthesis of non-racemic chiral mono-, di- and trisubstituted cyclic alkylene carbonates.

A Novel Catalytic Route to Polymerizable Bicyclic Cyclic Carbonate Monomers from Carbon Dioxide

A new catalytic route has been developed for the coupling of epoxides and CO2 affording polymerizable six-membered bicyclic carbonates. Cyclic epoxides equipped with a β-positioned OH group can be transformed into structurally diverse bicyclic cyclic carbonates in good yields and with high selectivity. Key to the chemo-selectivity is the difference between the reactivity of syn- and anti-configured epoxy alcohols, with the latter leading to six-membered ring carbonate formation in the presence of a binary AlIII aminotriphenolate complex/DIPEA catalyst. X-ray analyses show that the conversion of the syn-configured substrate evolves via a standard double inversion pathway providing a five-membered carbonate product, whereas the anti-isomer allows for activation of the oxirane unit of the substrate opposite to the pendent alcohol. The potential use of these bicyclic products is shown in ring-opening polymerization offering access to rigid polycarbonates with improved thermal resistance.

Exovinylene Cyclic Carbonates: Multifaceted CO2 -Based Building Blocks for Modern Chemistry and Polymer Science

Carbon dioxide is a renewable, inexhaustible, and cheap alternative to fossil resources for the production of fine chemicals and plastics. It can notably be converted into exovinylene cyclic carbonates, unique synthons gaining momentum for the preparation of an impressive range of important organic molecules and functional polymers, in reactions proceeding with 100 % atom economy under mild operating conditions in most cases. This Review summarizes the recent advances in their synthesis with particular attention on describing the catalysts needed for their preparation and discussing the unique reactivity of these CO₂ -based heterocycles for the construction of diverse organic building blocks and (functional) polymers. We also discuss the challenges and the future perspectives in the field.

Recent Advances in the Synthesis of Five-Membered Cyclic Carbonates and Carbamates from Allylic or Propargylic Substrates and CO2

The organic carbamates and carbonates are highly desirable compounds that have found a wide range of applications in drug design, medicinal chemistry, material science, and the polymer industry. The development of new catalytic carbonate and carbamate forming reactions, which employ carbon dioxide as a cheap, green, abundant, and easily available reagent, would thus represent an ideal substitution for existing methods. In this review, the advancements in the catalytic conversion of allylic and propargylic alcohols and amines to corresponding five-membered cyclic carbonates and carbamates are summarized. Both the metal- and the organocatalyzed methods are reviewed, as well as the proposed mechanisms and key intermediates of the illustrated carbonate and carbamate forming reactions.

Synthesis, characterization and application of oxovanadium(iv) complexes with [NNO] donor ligands: X-ray structures of their corresponding dioxovanadium(v) complexes

Two oxovanadium(iv) complexes ligated by [NNO] donor ligands have been synthesized and characterized by ESI-HRMS, elemental (CHN) analysis and spectroscopic (UV-Vis, IR and EPR) techniques. Block shaped brown crystals from the methanolic solutions of these oxovanadium(iv) complexes were obtained during the crystallization process. Crystallographic structures of the resulting crystals revealed that the original oxovanadium(iv) complexes have been transformed into new dioxovanadium(v) complexes with concomitant oxidation of VIV to VV. The original oxovanadium(iv) complexes have been identified to be an efficient catalyst for the CO2 cycloaddition reaction with epoxides resulting up to 100% cyclic carbonate products. The geometries of oxovanadium(iv) complexes are optimized by the density functional theory (DFT) calculations at the uB3LYP/6-31G**/LANL2DZ level of theory. The geometry and structural parameters of optimized structures of oxovanadium(iv) complexes are in excellent agreement with the parameters of X-ray structures of their dioxovanadium(v) counterparts. Further, TD-DFT and Spin Density Plots for the oxovanadium(iv) complexes are performed in order to get more insights about their electronic absorption and EPR spectroscopies, respectively.

Cycloaddition of di-substituted epoxides and CO2 under ambient conditions catalysed by rare-earth poly(phenolate) complexes

Lanthanum complex 1/TBAI is the first catalyst to achieve the cycloaddition of 1,2-disubstituted epoxides with 1 bar CO2 at room temperature. A DFT study discloses that the poly(phenolato) ligand plays a key role in the product dissociation step.

From Impossible to Possible: Atom-Economic Polymerization of Low Strain Five-Membered Carbonates

The direct ring-opening polymerization (ROP) of propylene carbonate (PC) only affords oligomers with substantial unidentified by-products, which hinders the efficient utilization of PC. Through detailed studies, for the first time, a careful mechanism involving the in situ release of propylene oxide (PO) from PC decarboxylation is proposed. Further, we report a novel strategy of copolymerization of PC/cyclic anhydrides via in situ capture of the formed intermediates. Results show that PC is successfully transformed into polyesters. Especially for the ring-opening alternating copolymerization (ROAC) of PC/phthalic anhydride (PA), a variety of advantages are manifold: i) slow-release of PO ensuring a perfectly alternating structure; ii) quantitative and fast transformation of PC; iii) visualization of polymerization process by a CO₂ pressure gauge. Of importance, through tandem polymerizations, PC is fully transformed into polyesters and polycarbonates concurrently, thus achieving PC utilization with a high atom-economy.