Methods of Analyzing Microsized Plastics in the Environment

An evaluation of microplastic contamination in the marine waters and species in the coastal region of the South Yellow Sea, China

Microplastics (MPs) contamination of marine environments poses a significant ecological risk, although impacts on species' realized niche spaces remain unclear. The current study investigates MPs distribution across pelagic habitats, benthic sediments, and key biota in the South Yellow Sea, China. Samples were collected via trawling across estuarine transects, and tissues were digested to extract MPs. Density gradient separations and vacuum-filtrations prepared particle extracts for ATR-FTIR and Micro-Raman spectroscopic characterization. Sampling along industrialized river transects reveals ubiquitous plastic particle presence, with concentrations ranging from 0 to 51.68 item/L seawater. Contamination levels reach their peak at station estuaries before dispersing offshore, indicating significant waste stream inputs. Importantly, MPs detected in demersal and pelagic fish species, as well as in bivalves, confirm exposure across trophic niches. Gastrointestinal tract and gill concentrations reached 0.6 items/g fresh tissue, reflecting significant biological uptake and in vivo retention. The greatest population of organisms occurred adjacent to polluted areas. Overall, distribution of MPs from polluted rivers to coastal food webs was evident, suggesting potential negative impacts on key ecological functions in this system. These findings underscore the need to develop upstream mitigation efforts so as to minimize MPs contamination in areas where nearshore and offshore niches intersect.

Understanding microplastic pollution: Tracing the footprints and eco-friendly solutions

Microplastics (MPs) pollution has emerged as a critical environmental issue with far-reaching consequences for ecosystems and human health. These are plastic particles measuring <5 mm and are categorized as primary and secondary based on their origin. Primary MPs are used in various products like cosmetics, scrubs, body wash, and toothpaste, while secondary MPs are generated through the degradation of plastic products. These have been detected in seas, rivers, snow, indoor air, and seafood, posing potential risks to human health through the food chain. Detecting and quantifying MPs are essential to understand their distribution and abundance in the environment. Various microscopic (fluorescence microscopy, scanning electron microscopy) and spectroscopy techniques (FTIR, Raman spectroscopy, X-ray photoelectron spectroscopy) have been reported to analyse MPs. Despite the challenges in scalable removal methods, biological systems have emerged as promising options for eco-friendly MPs remediation. Algae, bacteria, and fungi have shown the potential to adsorb and degrade MPs in wastewater treatment plants (WWTPs) offering hope for mitigating this global crisis. This review examines the sources, impacts, detection, and biological removal of MPs, highlighting future directions in this crucial field of environmental conservation. By fostering global collaboration and innovative research a path towards a cleaner and healthier planet for future generations can be promised.

Connecting the Dots: Livestock Animals as Missing Links in the Chain of Microplastic Contamination and Human Health

Plastic pollution is a global diffuse threat, especially considering its fragmentation into microplastics (MPs) and nanoplastics (NPs). Since the contamination of the aquatic environment is already well studied, most studies have now focused on the soil. Moreover, the number of studies on the exposure routes and toxic effects of MNPs in humans is continuously increasing. Although MNPs can cause inflammation, cytotoxicity, genotoxicity and immune toxicity in livestock animals, which can accumulate ingested/inhaled plastic particles and transfer them to humans through the food chain, research on this topic is still lacking. In considering farm animals as the missing link between soil/plant contamination and human health effects, this paper aims to describe their importance as carriers and vectors of MNP contamination. As research on this topic is in its early stages, there is no standard method to quantify the amount and the characteristics of MNPs in different matrices. Therefore, the creation of a common database where researchers can report data on MNP characteristics and quantification methods could be helpful for both method standardization and the future training of an AI tool for predicting the most abundant/dangerous polymer(s), thus supporting policy decisions to reduce plastic pollution and perfectly fitting with One Health principles.

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects. This work highlights available analytical techniques for detecting and characterizing microplastics in different environmental matrices, assessing their advantages and limitations. Additionally, this review explores innovative remediation approaches, such as microbial degradation and other advanced methods, offering promising prospects for combatting microplastic accumulation in contaminated environments. The focus on environmentally-friendly technologies, such as the use of microorganisms and enzymes for microplastic degradation, underscores the importance of sustainable solutions in plastic pollution management. In conclusion, this article not only deepens our understanding of the microplastic issue and its impact but also advocates for the urgent need to develop and implement effective strategies to mitigate this critical environmental challenge. In this context, the crucial role of advanced technologies, like quantitative Nuclear Magnetic Resonance spectroscopy (qNMR), as promising tools for rapid and efficient microplastic detection, is emphasized. Furthermore, the potential of the enzyme PETase (polyethylene terephthalate esterase) in microplastic degradation is examined, aiming to address the growing plastic pollution, particularly in saline environments like oceanic ecosystems. These innovations offer hope for effectively addressing microplastic accumulation in contaminated environments and minimizing its adverse impacts.

A review of recent progress in the application of Raman spectroscopy and SERS detection of microplastics and derivatives

The global environmental concern surrounding microplastic (MP) pollution has raised alarms due to its potential health risks to animals, plants, and humans. Because of the complex structure and composition of microplastics (MPs), the detection methods are limited, resulting in restricted detection accuracy. Surface enhancement of Raman spectroscopy (SERS), a spectral technique, offers several advantages, such as high resolution and low detection limit. It has the potential to be extensively employed for sensitive detection and high-resolution imaging of microplastics. We have summarized the research conducted in recent years on the detection of microplastics using Raman and SERS. Here, we have reviewed qualitative and quantitative analyses of microplastics and their derivatives, as well as the latest progress, challenges, and potential applications.

Micro(nano)plastics in commercial foods: A review of their characterization and potential hazards to human health

Micro (nano)plastics (MNPs) are pollutants of worldwide concern for their ubiquitous environmental presence and associated impacts. The higher consumption of MNPs contaminated commercial food can cause potential adverse human health effects. This review highlights the evidence of MNPs in commercial food items and summarizes different sampling, extraction, and digestion techniques for the isolation of MNPs, such as oxidizing digestion, enzymatic digestion, alkaline digestion and acidic digestion. Various methods for the characterization and quantification of microplastics (MPs) are also compared, including μ-Raman spectroscopy, μ-Fourier transform infrared spectroscopy (FTIR), thermal analysis and Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). Finally, we share our concerns about the risks of MNPs to human health through the consumption of commercial seafood. The knowledge of the potential human health impacts at a subcellular or molecular level of consuming mariculture products contaminated with MNPs is still limited. Moreover, MNPs are somewhat limited, hard to measure, and still contentious. Due to the nutritional significance of fish consumption, the risk of exposure to MNPs and the associated health effects are of the utmost importance.

Identification of plastic rice in adulterated raw and cooked rice

In the present study, attempts have been made to identify the presence of plastic rice in adulterated raw and cooked rice by comparing the compositional and morphological properties of fake rice and real rice using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) techniques. Various rice samples from the national capital region of India were studied for their compositional and morphological properties. The surface morphology of real rice and plastic rice was analyzed using scanning electron microscopy. Results suggest that plastic rice used as an adulterant in raw or cooked rice is made up of polystyrene, which is a well-known toxic chemical entity. The studies suggest that these techniques can be used as a scientific tool to detect and identify the presence of plastic rice in adulterated raw and cooked rice.

Laboratory Studies about Microplastic Aging and Its Effects on the Adsorption of Chlorpyrifos

The constant change in microplastics (MP) due to exposure to environmental conditions leads to physical and chemical changes that enhance their ability to transport other pollutants, increasing the concern about their widespread presence in the environment. This work aimed to simulate the aging process of six MP (polyamide 6, unplasticized polyvinyl chloride, low-density polyethylene, polystyrene, polyethylene-co-vinyl acetate, polypropylene) in freshwater and seawater ecosystems at laboratory scale and evaluate its effects through optical microscope observation, Fourier transform infrared spectroscopy-Attenuated Total Reflectance (FTIR-ATR), Raman spectroscopy, and thermal gravimetric analysis (TGA). Through a combined experimental study of aged MP, the degradation by UV interaction was evidenced by the appearance of new infrared bands in the FTIR spectra assigned to ketones and hydroxyl groups. While Raman analysis and microscope images reveal the appearance of pores, wrinkles, and roughness in the MP surfaces. Variations in the temperature of the maximum weight loss of the MP were observed in the TGA analysis. The adsorption of chlorpyrifos (CPF), a common pesticide widely used in agriculture, by the pristine and aged MP was also studied. The highest affinity for CPF was observed for pristine LDPE and the lowest for PP. The batch adsorption studies revealed an increase in adsorption capacity as a consequence of the aging process for both MP. These results proved that the weathering effects caused changes in the behavior of MP, namely in the interaction with other pollutants.

Recent analytical techniques, and potential eco-toxicological impacts of textile fibrous microplastics (FMPs) and associated contaminates: A review

Despite of our growing understanding of microplastic's implications, research on the effects of fibrous microplastic (FMPs) on the environment is still in its infancy. Some scientists have hypothesized the possibility of natural textile fibres, which may act as one of the emerging environmental pollutants prevalent among microplastic pollutants in the environment. Therefore, this review aims to critically evaluate the toxic effects of emerging FMPs, the presence, and sources of FMPs in the environment, identification and analytical techniques, and the potential impact or toxicity of the FMPs on the environment and human health. About175 publications (2011-2023) based on FMPs were identified and critically reviewed for transportation, analysis and ecotoxicological behaviours of FMPs in the environment. Textile industries, wastewater treatment plants, and household washing of clothes are significant sources of FMPs. In addition, various characterization techniques (e.g., FTIR, SEM, RAMAN, TGA, microscope, and X-Ray Fluorescence Spectroscopy) commonly used for the identification and analysis of FMPs are also discussed, which justifies the novelty aspects of this review. FMPs are pollutants of emerging concern due to their prevalence and persistence in the environment. FMPs are also found in the food chain, which is an alarming situation for living organisms, including effects on the nervous system, digestive system, circulatory system, and genetic alteration. This review will provide readers with a comparison of different analytical techniques, which will be helpful for researchers to select the appropriate analytical techniques for their study and enhance their knowledge about the harmful effects of FMPs.

Unveiling the noxious effect of polystyrene microplastics in aquatic ecosystems and their toxicological behavior on fishes and microalgae

Microplastic (MP) particles are considered noxious pollutants due to their presence in aquatic habitats at almost every level of the food chain. Thus, the entry of MP particles into marine waterbodies has triggered a common research interest. Until recently, the toxicity of polystyrene towards aquatic creatures in comparison to other polymers has not been widely investigated. This article provides an extensive overview of the occurrence of microplastic particles, the route of polystyrene (PS) in the aquatic ecosystem, the PS properties characterization, and its noxious effects on the aquatic biota, particularly fishes and microalgae. Alarming high levels of polystyrene were found in urban, coastal, and rural surface waters and sediments. The fast-screening technique began with a stereoscope to determine the polystyrene particles' shape, size, and color on the organism. SEM and complemented by micro FTIR or Raman spectroscopy were used to evaluate MP's polymer structures. The findings present evidence suggesting that polystyrene buildup in fish can have long-term and unknown consequences. Meanwhile, the presence of polystyrene on microalgae causes a decrease in chlorophyll concentration and photosynthetic activity, which may disrupt photosynthesis by interfering with the electron characters and leading to the production of reactive oxygen species (ROS).

Understanding the underestimated: Occurrence, distribution, and interactions of microplastics in the sediment and soil of China, India, and Japan

Microplastics (MPs) are non-biodegradable substances that can sustain our environment for up to a century. What is more worrying is the incapability of modern technologies to annihilate MPs from om environment. One ramification of MPs is their impact on every kind of life form on this planet, which has been discussed ahead; that is why these substances are surfacing in everyday discussions of scholars and researchers. This paper discusses the overview of the global occurrence, abundance, analysis, and remediation techniques of MPs in the environment. This paper primarily reviews the event and abundance of MPs in coastal sediments and agricultural soil of three major Asian countries, India, China, and Japan. A significant concentration of MPs has been recorded from these countries, which affirms its strong presence and subsequent environmental impacts. Concentrations such as 73,100 MPs/kg in Indian coastal sediments and 42,960 particles/kg in the agricultural soil of China is a solid testimony to prove their massive outbreak in our environment and require urgent attention towards this issue. Conclusions show that human activities, rivers, and plastic mulching on agricultural fields have majorly acted as carriers of MPs towards coastal and terrestrial soil and sediments. Later, based on recorded concentrations and gaps, future research studies are recommended in the concerned domain; a dearth of studies on MPs influencing Indian agricultural soil make a whole sector and its consumer vulnerable to the adverse effects of this emerging contaminant.

Microplastic in the Baltic Sea: A review of distribution processes, sources, analysis methods and regulatory policies

Microplastics pollution is an issue of great concern for scientists, governmental bodies, ecological organisations, and the general public. Microplastics pollution is widespread and is a great environmental problem on account of its potential toxicity for marine biota and human health. Today, almost all the world's seas and oceans are polluted with microplastics. The Baltic Sea is a semi-enclosed reservoir of brackish water and is a hotspot for contamination in terms of eutrophication and the presence of organic matter. Microplastics are quite intense, based on data from studies of marine litter and microplastics in the Baltic Sea. The number of microplastics in the Baltic Sea water is 0.07-3300 particles/m³, and in sediments 0-10179 particles/kg. These amounts prove that the waters and sediments of the Baltic Sea are heavily contaminated with microplastics. This article provides a comprehensive review of the microplastic origins and transport routes to the Baltic Sea. The data is presented as the concentration of microplastics in surface waters, sediments, and sea sand. The extraction methods used and the microplastics techniques are also presented. The possibilities and limitations of water and sediment sampling methods for microplastics determination were summarised, taking into account sampling tools, volume and depth. Extraction, separation, filtration, and visual sorting are outlined as sample preparation techniques for microplastic analysis. This review also focuses on the problems of obtaining data relevant to the development of the mathematical models necessary to monitor trends in the spread of microplastics in the Baltic Sea. Finally, several important laws and policies, which are in place in the Baltic States to control and manage microplastic pollution in the region, are highlighted.

Customizable Machine-Learning Models for Rapid Microplastic Identification Using Raman Microscopy

Raman spectroscopy is commonly used in microplastics identification, but equipment variations yield inconsistent data structures that disrupt the development of communal analytical tools. We report a strategy to overcome the issue using a database of high-resolution, full-window Raman spectra. This approach enables customizable analytical tools to be easily created─a feature we demonstrate by creating machine-learning classification models using open-source random-forest, K-nearest neighbors, and multi-layer perceptron algorithms. These models yield >95% classification accuracy when trained on spectroscopic data with spectroscopic data downgraded to 1, 2, 4, or 8 cm^-1 spacings in Raman shift. The accuracy can be maintained even in non-ideal conditions, such as with spectroscopic sampling rates of 1 kHz and when microplastic particles are outside the focal plane of the laser. This approach enables the creation of classification models that are robust and adaptable to varied spectrometer setups and experimental needs.

Qualitative characterisation and identification of microplastics in a freshwater dam at Gauteng Province, South Africa, using pyrolysis-gas chromatography-time of flight-mass spectrometry (Py-GC-ToF-MS)

Pyrolysis GC-ToF-MS-based analytical study was employed in the identification of microplastics (MPs) in the freshwater of a dam Rietvlei (RTV) located at Gauteng Province, South Africa. These MPs extracted in five locations of the dam were found to contain five different plastic polymeric constituents including PE, PS, PA, PVC and PET along with phthalate esters and fatty acid (amides and esters) derivatives as additives. Based on the fragmented pyrolyzate products, the contribution of plastic polymers and additives was 74% and 26% respectively. Among polymers, PA was dominant with 52% followed by PVC (16%) and others (13%) such as PE, PET and PS in MPs. Scanning electron micrographs of MPs in this aquatic body displayed the rough and fibrous typed patterns. The residual mass of 8-14% was left after the thermal degradation of MPs in RTV samples in the temperature range of 500-550 °C. The results of thermogravimetry (TGA) and energy-dispersive (EDS) analyses are mutually dependent and coherent to each other by way of demonstrating the presence of various inorganic compounds in the form of additives and/or sorbates. The lessened intensities of carbonyl stretching in PA (1625 cm^-1) and PET (1725 cm^-1) type of MPs attributed the occurrence of degradation and weathering in this aquatic system. The possible causes to the contamination of MPs in this freshwater are the located industries and poor waste management strategies being practised in this densely populated city. Based on the industry, waste management and population perspectives, the increased contamination of MPs is very likely in this freshwater which will drastically affect the ecosystem in the near future. Based on the characterisation results, the presence of various polymers, additives and the metals in MPs is envisaged to deteriorate the aquatic life along with successive risks for the people as a consequence of bio-magnification.

Generation of micro(nano)plastics and migration of plastic additives from Poly(vinyl chloride) in water under radiation-free ambient conditions

A batch experiment was conducted to observe the liberation of micro- and nano-sized plastic particles and plastic additive-originated organic compounds from poly(vinyl chloride) under radiation-free ambient conditions. The weathering of PVC films in deionized water resulted in isolated pockets of surface erosion. Additional ^●OH from Fenton reaction enhanced PVC degradation and caused cavity erosion. The detachment of plastic fragments from the PVC film surfaces was driven by autocatalyzed oxidative degradation. Over 90% of micro-sized plastic particles were <60 μm in length. The detached plastic fragments underwent intensified weathering, which involved strong dehydrochlorination and oxidative degradation. Further fragmentation of micro-sized particles into nano-sized particles was driven by oxidative degradation with complete dehydrochlorination being achieved following formation of nanoplastics. 20 organic compounds released from the PVC films into the solutions were identified. And some of them can be clearly linked to common plastic additives. In the presence of additional ^●OH, the coarser nanoplastic particles (>500 nm) tended to be rapidly disintegrated into finer plastic particles (<500 nm), while the finest fraction of nanoplastics (<100 nm) could be completely decomposed and disappeared from the filtrates. The micro(nano)plastics generated from the PVC weathering were highly irregular in shape.

Flow Cytometry as a Rapid Alternative to Quantify Small Microplastics in Environmental Water Samples

The most frequently used method to quantify microplastics (MPs) visually by microscope is time consuming and labour intensive, where the method is also hindered by the size limitation at 10 µm or even higher. A method is proposed to perform pre-concentration of MPs by vacuum filtration, hydrogen peroxide wet digestion, fluorescent staining and flow cytometric determination to rapidly detect and quantify small MPs sized from 1–50 µm. The method performance was evaluated by the spiking of seven different types of polymer, including polystyrene (PS), low-density polyethylene (LDPE), polypropylene (PP), poly(methyl methacrylate) (PMMA), polyvinyl chloride (PVC), polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) at different levels (400, 4000, 40,000 particles mL−1), with a satisfactory overall % recoveries (101 ± 19.4%) observed, where in general no significant difference between the two methods was observed. Furthermore, a pre-concentration process by vacuum filtration was introduced to reduce the matrix effect. After pre-concentration, satisfactory % recoveries and accuracy in MP counts resulted from both ultrapure water (94.33 ± 11.16%) and sea water (103.17 ± 9.50%) samples. The validated method using flow cytometry can be used to quantify MPs in environmental water samples that can reduce time and human resources.

Porous carbon nanoarchitectonics for the environment: detection and adsorption

As a post-nanotechnology concept, nanoarchitectonics has emerged from the 20th century to the 21st century. This review summarizes the recent progress in the field of metal-free porous carbon nanoarchitectonics.