Cold Atmospheric Pressure Plasma Jet Operated in Ar and He: From Basic Plasma Properties to Vacuum Ultraviolet, Electric Field and Safety Thresholds Measurements in Plasma Medicine

Reactive Species Risk Assessment Using Optimized HET-CAM Safety Evaluation of Feed Gas-Modified Gas Plasma Technology and Anticancer Drugs

Clinical therapies, including dermatology and oncology, require safe application. In vitro experiments allow only limited conclusions about in vivo effects, while animal studies in, e.g., rodents have ethical constraints at a large scale. Chicken embryos lack pain reception until day 15 postfertilization, making the in ovo model a suitable alternative to in vivo safety assessment. In addition, the hen's egg test on chorioallantoic membrane assay allows irritation potential analysis for topical treatments, but standardized analysis has been limited so far. Medical gas plasma is a topical, routine, approved dermatology treatment. Recent work suggests the potential of this technology in oncology. Its main mode of action is the release of various reactive species simultaneously. Intriguingly, varying plasma feed gas compositions generates customized reactive species profiles previously shown to be optimized for specific applications, such as skin cancer treatment. To support clinical implications, we developed a novel chicken embryo CAM scoring and study scheme and employed the model to analyze 16 different plasma feed gas settings generated by the atmospheric pressure plasmajet kINPen, along with common anticancer drugs (e.g., cisplatin) and physiological mediators (e.g., VEGF). Extensive gas- and liquid-phase plasma reactive species profiling was done and was found to have a surprisingly low correlation with irritation potential parameters. Despite markedly different reactive species patterns, feed gas-modulated kINPen plasma was equally tolerated compared to standard argon plasma. CAM irritation with gas plasmas but not anticancer agents was reversed 48 h after treatment, underlining the only temporary tissue effects of medical gas plasma. Our results indicate a safe therapeutic application of reactive species.

Development and characterization of a spark plasma device designed for medical and aesthetic applications

Cold atmospheric plasma devices have shown high potential to be useful for different medical applications. In this study, it has been tried to develop and characterize a cold atmospheric spark plasma device that can be used safely as a tool for medical and aesthetic applications. The schematic of the device is presented in the paper, and the signals of each block are also tested. A special handpiece for this device is designed to make the device as safe as possible. The device's properties that can impose a risk to users' health have been under consideration. The device's electrical properties have been tested, and results show that the electrical current of the device is below the safety thresholds and can be used safely. The radiation power of the device also has been tested. It is shown that the time needed for the radiation power to reach the danger threshold is much longer than the treatment time. The device will not impose any risk regarding radiation from the UV spectrum. Optical emission spectroscopy is also used to investigate the neutral and charged species that are the by-products of electrical discharge. The presence of NOx and OH locally in the discharge can be helpful for various medical applications. This paper presents one of the first studies conducted to investigate the engineering aspect and the immunometry of the spark plasma that can be used in medicine and other purposes.

Effects of Atmospheric Pressure Plasma Jet on 3D-Printed Acrylonitrile Butadiene Styrene (ABS)

Polymers are essential in several sectors, yet some applications necessitate surface modification. One practical and eco-friendly option is non-thermal plasma exposure. The present research endeavors to examine the impacts of dielectric barrier discharge atmospheric pressure plasma on the chemical composition and wettability properties of acrylonitrile butadiene styrene surfaces subject to the action of additive manufacturing. The plasma source was produced by igniting either helium or argon and then adjusted to maximize the operational conditions for exposing polymers. The drop in contact angle and the improvement in wettability after plasma exposure can be due to the increased oxygen-containing groups onto the surface, together with a reduction in carbon content. The research findings indicated that plasma treatment significantly improved the wettability of the polymer surface, with an increase of up to 60% for both working gases, while the polar index increased from 0.01 up to 0.99 after plasma treatment. XPS measurements showed an increase of up to 10% in oxygen groups at the surface of He-plasma-treated samples and up to 13% after Ar-plasma treatment. Significant modifications were observed in the structure that led to a reduction of its roughness by 50% and also caused a leveling effect after plasma treatment. A slight decrease in the glass and melting temperature after plasma treatment was pointed out by differential scanning calorimetry and broadband dielectric spectroscopy. Up to a 15% crystallinity index was determined after plasma treatment, and the 3D printing process was measured through X-ray diffraction. The empirical findings encourage the implementation of atmospheric pressure plasma-based techniques for the environmentally sustainable manipulation of polymers for applications necessitating higher levels of adhesion and specific prerequisites.

Atmospheric Pressure Plasma Jet Exposure of Polylactic Acid Surfaces for Better Adhesion: Plasma Parameters towards Polymer Properties

Polymers play a crucial role in multiple industries; however, surface modification is necessary for certain applications. Exposure to non-thermal plasma provides a viable and environmentally beneficial option. Fused deposition molding utilizes biodegradable polylactic acid, although it encounters constraints in biomedical applications as a result of inadequate mechanical characteristics. This study investigates the effects of atmospheric pressure plasma generated by a dielectric barrier discharge system using helium and/or argon on the modification of polylactic acid surfaces, changes in their wettability properties, and alterations in their chemical composition. The plasma source was ignited in either He or Ar and was tailored to fit the best operational conditions for polymer exposure. The results demonstrated the enhanced wettability of the polymer surface following plasma treatment (up to 40% in He and 20% in Ar), with a marginal variation observed among treatments utilizing different gases. The plasma treatments also caused changes in the surface topography, morphology, roughness, and hydrophilicity. Plasma exposure also resulted in observable modifications in the dielectric characteristics, phase transition, and structure. The experimental findings endorse the utilization of plasma technologies at normal air pressure for environmentally friendly processing of polymer materials, specifically for applications that necessitate enhanced adhesion and have carefully selected prerequisites.

Cold Atmospheric Pressure Plasma: A Growing Paradigm in Diabetic Wound Healing-Mechanism and Clinical Significance

Diabetes is one of the most significant causes of death all over the world. This illness, due to abnormal blood glucose levels, leads to impaired wound healing and, as a result, foot ulcers. These ulcers cannot heal quickly in diabetic patients and may finally result in amputation. In recent years, different research has been conducted to heal diabetic foot ulcers: one of them is using cold atmospheric pressure plasma. Nowadays, cold atmospheric pressure plasma is highly regarded in medicine because of its positive effects and lack of side effects. These conditions have caused plasma to be considered a promising technology in medicine and especially diabetic wound healing because studies show that it can heal chronic wounds that are resistant to standard treatments. The positive effects of plasma are due to different reactive species, UV radiation, and electromagnetic fields. This work reviews ongoing cold atmospheric pressure plasma improvements in diabetic wound healing. It shows that plasma can be a promising tool in treating chronic wounds, including ones resulting from diabetes.

Influence of a transient spark plasma discharge on producing high molecular masses of chemical products from L-cysteine

Cold atmospheric pressure plasmas are considered a forthcoming method in many research areas. Plasma modification of biomolecules has received much attention in addition to plasma-treated biomaterials. Hence, in this work, we operated a transient spark plasma (TSP) discharge to study its effect on the L-cysteine chemical structure. the TSP was configured in a pin-to-ring electrode arrangement and flowed by Ar gas. We also investigated the effect of two chemicals; dimethyl sulfoxide (DMSO) and hydrogen peroxide (H₂O₂) by the bubbling method to show how they can change the creation of new chemical bioproducts. Ultraviolet-Visible absorption spectroscopy, Fourier transform infrared spectroscopy and Liquid chromatography-mass spectroscopy were used to investigate any changes in chemical bonds of cysteine structure and to depict the generation of new biomolecules. Based on the displayed results plasma-generated reactive species had a great role in the chemical structure of the cysteine. Entering DMSO and H₂O₂ into the plasma caused the creation of new products and the heaviest biomolecule was produced by the simultaneous addition of DMSO and H₂O₂. The results also predicted that some chemical products and amino acids with a higher value molecular masse produced from the polymerization process of cysteine solution. The strong oxidation process is responsible for the heavy chemical compounds.

Helium Atmospheric Pressure Plasma Jet Effects on Two Cultivars of Triticum aestivum L

The use of cold plasma in the treatment of seeds before sowing presents a promising technique for sustainable agriculture. The objective of this study is to evaluate the effect of cold plasma treatment on the morphology of wheat seeds (Triticum aestivum L. 'Dacic' and 'Otilia'), their germination, biochemical composition, and the nutritional quality of wheat grass. Wheat seeds were morphologically and elementally characterized by atomic force microscopy (AFM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray computer tomography (CT), and particle-induced X-ray emission (PIXE). Helium was used as a working gas for plasma generation and the analysis of the species produced showed the presence of NO_γ, OH, N₂ and N₂⁺ and O. Evaluation of germination and plant growth for 10 days (wheat grass stage) highlighted a specific trend for each cultivar. The biochemical analysis of wheat grass highlighted an increase in the chlorophyll content in the plasma-treated variants, an increase in the flavonoid and polyphenol content in 'Dacic'-treated variant, while the soluble protein content, antioxidant activity, and color were not affected. The analysis of the nutritional quality of wheat grass by the FT-NIR analytical technique highlighted an increase in the ash content in the plasma-treated wheat cultivars, while the humidity, proteins, neutral detergent fiber (NDF), acid detergent fiber (ADF), and energy values were not affected.

Different Radial Modification Profiles Observed on APPJ-Treated Polypropylene Surfaces according to the Distance between Plasma Outlet and Target

The plasma jet transfer technique relies on a conductive wire at floating potential, which, upon entering in contact with a primary discharge, is capable of igniting a small plasma plume at the distal end of a long flexible plastic tube. In this work, two different long tube configurations were employed for the surface modification of polypropylene (PP) samples using argon as the working gas. One of the jet configurations has a thin copper (Cu) wire, which was installed inside the long tube. In the other configuration, the floating electrode is a metallic mesh placed between two plastic tubes in a coaxial arrangement. In the first case, the tip of the Cu wire is in direct contact with the working gas at the plasma outlet, whereas, in the second, the inner plastic tube provides an additional dielectric barrier that prevents the conductor from being in contact with the gas. Water contact angle (WCA) measurements on treated PP samples revealed that different surface modification radial profiles are formed when the distance (d) between the plasma outlet and target is changed. Moreover, it was found that the highest WCA reduction does not always occur at the point where the plasma impinges the surface of the material, especially when the d value is small. Through X-ray photoelectron spectroscopy (XPS) analysis, it was confirmed that the WCA values are directly linked to the oxygen-functional groups formed on the PP surfaces after the plasma treatment. An analysis of the WCA measurements along the surface, as well as their temporal evolution, together with the XPS data, suggest that, when the treatment is performed at small d values, the plasma jet removes some functional groups at the point where the plasma hits the surface, thus leading to peculiar WCA profiles.

Frontiers in Atmospheric Pressure Plasma Technology

Atmospheric pressure plasmas represent a feasible and eco-friendly alternative to conventional physicochemical methods used in technology today for facing materials [...]

Electric Field Sensor Based on High Q Fano Resonance of Nano-Patterned Electro-Optic Materials

This paper presents theoretical studies of Fano resonance based electric-field (E-field) sensors. E-field sensor based on two electro-optical (EO) materials i.e., barium titanate (BaTiO3, BTO) nanoparticles and relaxor ferroelectric material Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) combined with nanostructure are studied. As for the BTO based E-field sensor, a configuration of filling the BTO nanoparticles into a nano-patterned thin film silicon is proposed. The achieved resonance quality factor (Q) is 11,855 and a resonance induced electric field enhancement factor is of around 105. As for the design of PMN-PT based E-field sensor, a configuration by combining two square lattice air holes in PMN-PT thin film but with one offsetting hole left is chosen. The achieved resonance Q is of 9,273 and an electric field enhancement factor is of around 96. The resonance wavelength shift sensitivity of PMN-PT nanostructured can reach up to 4.768 pm/(V/m), while the BTO based nanostructure has a sensitivity of 0.1213 pm/(V/m). If a spectrum analyzer with 0.1 pm resolution is considered, then the minimum detection of the electric field Emin is 20 mV/m and 0.82 V/m for PMN-PT and BTO based nanostructures, respectively. The nano-patterned E-field sensor studied here are all dielectric, it has therefore the advantage of large measurement bandwidth, high measurement fidelity, high spatial resolution and high sensitivity.

Optimization of Atmospheric Pressure Plasma Jet with Single-Pin Electrode Configuration and Its Application in Polyaniline Thin Film Growth

This study systematically investigated an atmospheric pressure plasma reactor with a centered single pin electrode inside a dielectric tube for depositing the polyaniline (PANI) thin film based on the experimental case studies relative to variations in pin electrode configurations (cases I, II, and III), bluff-body heights, and argon (Ar) gas flow rates. In these cases, the intensified charge-coupled device and optical emission spectroscopy were analyzed to investigate the factors affecting intensive glow-like plasma generation for deposition with a large area. Compared to case I, the intense glow-like plasma of the cases II and III generated abundant reactive nitrogen species (RNSs) and excited argon radical species for fragmentation and recombination of PANI. In case III, the film thickness and deposition rate of the PANI thin film were about 450 nm and 7.5 nm/min, respectively. This increase may imply that the increase in the excited radical species contributes to the fragmentation and recombination due to the increase in RNSs and excited argon radicals during the atmospheric pressure (AP) plasma polymerization to obtain the PANI thin film. This intense glow-like plasma generated broadly by the AP plasma reactor can uniformly deposit the PANI thin film, which is confirmed by field emission-scanning electron microscopy and Fourier transform infrared spectroscopy.