1
|
Butkutė K, Vaitkevičius V, Adomaitytė F. Eco-Friendly 3D-Printed Concrete Made with Waste and Organic Artificial Aggregates. MATERIALS (BASEL, SWITZERLAND) 2024; 17:3290. [PMID: 38998375 PMCID: PMC11243148 DOI: 10.3390/ma17133290] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2024] [Revised: 04/14/2024] [Accepted: 04/19/2024] [Indexed: 07/14/2024]
Abstract
In this research, the results of an experimental study on the use of three alternative components for creating artificial aggregates (AAs) (granules) and their usage in 3D-printed concrete (3DPC) are examined. This study combines AAs made from organic components like hemp shives (HSs), pyrolyzed coal (charcoal), waste/municipal solid waste incinerator bottom slag (BS), and a mix of a reference 3DPC with the aforementioned AAs. Particularly, to enhance these properties to make low-carbon 3DPC, in this research, the potential of using AAs as lightweight aggregates was increased to 14% in terms of the mass of the concrete. Each mix was tested in terms of its printability via a preliminary test in a 3D printing laboratory. For an additional comparison with the aforementioned cases, 3DPC was mixed with unprocessed hemp shives, charcoal, and BS. Furthermore, their strength was measured at 28 days, and lastly, their durability parameters and shrinkage were experimentally investigated. Cross-sections of the fragments were studied under a scanning electron microscope. In this study, we achieved improvements in the mechanical properties of AAs for their development and implementation as an innovative way to reduce carbon in 3DPC.
Collapse
Affiliation(s)
- Karolina Butkutė
- Faculty of Civil Engineering and Architecture, Kaunas University of Technology, Studentų g. 48, 51367 Kaunas, Lithuania; (V.V.); (F.A.)
| | | | | |
Collapse
|
2
|
Eyupoglu S, Eyupoglu C, Merdan N. Investigation of the effect of enzymatic and alkali treatments on the physico-chemical properties of Sambucus ebulus L. plant fiber. Int J Biol Macromol 2024; 266:130968. [PMID: 38521324 DOI: 10.1016/j.ijbiomac.2024.130968] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2024] [Revised: 03/05/2024] [Accepted: 03/15/2024] [Indexed: 03/25/2024]
Abstract
The investigation aims to determine the effect of enzymatic and alkali treatments on Sambucus ebulus L. stem fiber. For this purpose, Sambucus ebulus L. stem fibers were treated with alkali, cellulase, and pectinase enzymes. An image processing technique was developed and implemented to calculate the average thicknesses of Sambucus ebulus L. fibers. The thickness of alkali, cellulase and pectinase enzyme treated fibers was determined as 478.62 μm, 808.28 μm and 478.20 μm, respectively. Scanning electron microscopy analysis illustrated that enzymatic and alkali treatments lead to the breakage of fiber structure. Furthermore, enzymatic and alkali treatments induce variations in elemental ingredients. All treatments increased the crystallinity index of Sambucus ebulus L. fiber from 72 % (raw fiber) to 83 % (alkali treated), 75.2 % (cellulase enzyme treated) and 86.3 % (pectinase enzyme treated) due to the hydrolysis of hemicellulose. Fourier transform infrared analysis indicated that there are no significant differences in functional groups. Thermogravimetric analysis shows that enzymatic and alkali treatments improve final degradation temperature of the fiber. Mechanical behaviors of cellulase enzyme-treated fiber decrease compared to raw fiber, while pectinase enzyme and alkali treatment cause to improve mechanical properties. Tensile strength of samples was determined as 76.4 MPa (cellulase enzyme treated fiber), 210 MPa (pectinase enzyme treated fiber) and 240 MPa (alkali treated fiber). Young's modules of cellulase enzyme, pectinase enzyme and alkali treated fibers were predicted as 5.5 GPa, 13.1 GPa and 16.6 GPa. Elongation at break of samples was calculated as 5.5 % (cellulase enzyme treated fiber), 6.5 % (pectinase enzyme treated fiber) and 6 % (alkali treated fiber). The results suggest that enzymatic and alkali treatments can modify the functional and structural attributes of Sambucus ebulus L. fiber.
Collapse
Affiliation(s)
- Seyda Eyupoglu
- Department of Textile, Clothing, Footwear and Leather, Vocational School of Technical Sciences, Istanbul University - Cerrahpaşa, Istanbul, Türkiye.
| | - Can Eyupoglu
- Department of Computer Engineering, Turkish Air Force Academy, National Defence University, Istanbul, Türkiye.
| | - Nigar Merdan
- Department of Fashion and Textile Design, Architecture and Design Faculty, Istanbul Commerce University, Istanbul, Türkiye
| |
Collapse
|
3
|
Igwebuike CM, Awad S, Andrès Y. Renewable Energy Potential: Second-Generation Biomass as Feedstock for Bioethanol Production. Molecules 2024; 29:1619. [PMID: 38611898 PMCID: PMC11013350 DOI: 10.3390/molecules29071619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2024] [Revised: 03/25/2024] [Accepted: 03/30/2024] [Indexed: 04/14/2024] Open
Abstract
Biofuels are clean and renewable energy resources gaining increased attention as a potential replacement for non-renewable petroleum-based fuels. They are derived from biomass that could either be animal-based or belong to any of the three generations of plant biomass (agricultural crops, lignocellulosic materials, or algae). Over 130 studies including experimental research, case studies, literature reviews, and website publications related to bioethanol production were evaluated; different methods and techniques have been tested by scientists and researchers in this field, and the most optimal conditions have been adopted for the generation of biofuels from biomass. This has ultimately led to a subsequent scale-up of procedures and the establishment of pilot, demo, and large-scale plants/biorefineries in some regions of the world. Nevertheless, there are still challenges associated with the production of bioethanol from lignocellulosic biomass, such as recalcitrance of the cell wall, multiple pretreatment steps, prolonged hydrolysis time, degradation product formation, cost, etc., which have impeded the implementation of its large-scale production, which needs to be addressed. This review gives an overview of biomass and bioenergy, the structure and composition of lignocellulosic biomass, biofuel classification, bioethanol as an energy source, bioethanol production processes, different pretreatment and hydrolysis techniques, inhibitory product formation, fermentation strategies/process, the microorganisms used for fermentation, distillation, legislation in support of advanced biofuel, and industrial projects on advanced bioethanol. The ultimate objective is still to find the best conditions and technology possible to sustainably and inexpensively produce a high bioethanol yield.
Collapse
Affiliation(s)
| | - Sary Awad
- IMT Atlantique, GEPEA, UMR CNRS 6144, 4 Rue Alfred Kastler, F-44000 Nantes, France; (C.M.I.); (Y.A.)
| | | |
Collapse
|
4
|
Pascoli DU, Dichiara A, Gustafson R, Bura R. A Robust Process to Produce Lignocellulosic Nanofibers from Corn Stover, Reed Canary Grass, and Industrial Hemp. Polymers (Basel) 2023; 15:polym15040937. [PMID: 36850221 PMCID: PMC9967869 DOI: 10.3390/polym15040937] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 02/04/2023] [Accepted: 02/11/2023] [Indexed: 02/16/2023] Open
Abstract
The use of agricultural waste biomass for nanocellulose production has gained interest due to its environmental and economic benefits compared to conventional bleached pulp feedstock. However, there is still a need to establish robust process technologies that can accommodate the variability of waste feedstocks and to understand the effects of feedstock characteristics on the final nanofiber properties. Here, lignocellulosic nanofibers with unique properties are produced from various waste biomass based on a simple and low-cost process using mild operating conditions. The process robustness is demonstrated by diversifying the feedstock, ranging from food crop waste (corn stover) to invasive grass species (reed canary grass) and industrial lignocellulosic residues (industrial hemp). This comprehensive study provides a thorough examination of the influence of the feedstocks' physico-chemical characteristics on the conversion treatment, including process yield, degree of delignification, effectiveness of nanofibrillation, fiber morphology, surface charge, and density. Results show that nanofibers have been successfully produced from all feedstocks, with minor to no adjustments to process conditions. This work provides a framework for future studies to engineer nanocellulose with specific properties by taking advantage of biomass feedstocks' intrinsic characteristics to enable versatile applications.
Collapse
Affiliation(s)
- Danielle Uchimura Pascoli
- School of Environmental and Forest Sciences, University of Washington, Seattle, WA 98195, USA
- VERDE Nanomaterials Inc., Davis, CA 95618, USA
- Correspondence: (D.U.P.); (R.B.)
| | - Anthony Dichiara
- School of Environmental and Forest Sciences, University of Washington, Seattle, WA 98195, USA
| | - Rick Gustafson
- School of Environmental and Forest Sciences, University of Washington, Seattle, WA 98195, USA
| | - Renata Bura
- School of Environmental and Forest Sciences, University of Washington, Seattle, WA 98195, USA
- Correspondence: (D.U.P.); (R.B.)
| |
Collapse
|
5
|
Moreira WM, Moreira PVV, Dos Santos DF, Gimenes ML, Vieira MGA. Nanogreen is the new future: the conversion of lignin and lignocellulosic wastes into nanomaterials. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:19564-19591. [PMID: 36645595 DOI: 10.1007/s11356-023-25150-1] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Accepted: 01/02/2023] [Indexed: 06/17/2023]
Abstract
The lignocellulose biorefinery industry has assumed an important role within the current scenario. Lignin is an abundant and available biopolymer and one of the compounds present in the lignocellulosic waste. Therefore, processing lignin into new materials and nanomaterials, such as nanolignin, has attracted the attention of the scientific community. Lignin nanoparticles are materials that have excellent properties, such as biodegradability and non-toxicity, and have great potential as chelating agents, antimicrobials agents, UV protectors, nanofillers, adsorbents, catalysts, supercapacitors, emulsion stabilizers, delivered systems, drugs, and gene carriers. This review article covers the emergent scenario of nanolignin and the main aspects of scientific interest, such as the conversion and functionalization of lignin, the valorization of lignocellulose waste, and nanoparticle synthesis. A techno-economic evaluation of the biorefinery model of the nanolignin synthesis is presented based on the simulation of the process on the experimental and commercial databases available and reported by some authors. Finally, the techno-economic assessment is complemented by the life cycle assessment of various nanolignin synthesis pathways reported to evaluate the environmental implications and support this emergent technology development.
Collapse
Affiliation(s)
- Wardleison Martins Moreira
- School of Chemical Engineering, University of Campinas, Albert Einstein Avenue, Campinas, São Paulo, 50013083-852, Brazil.
- Department of Chemical Engineering, PEQ, State University of Maringá, Avenida Colombo, Maringá, Paraná, 579087020-900, Brazil.
| | - Paula Valéria Viotti Moreira
- Department of Chemical Engineering, PEQ, State University of Maringá, Avenida Colombo, Maringá, Paraná, 579087020-900, Brazil
| | - Débora Federici Dos Santos
- Department of Chemical Engineering, PEQ, State University of Maringá, Avenida Colombo, Maringá, Paraná, 579087020-900, Brazil
| | - Marcelino Luiz Gimenes
- Department of Chemical Engineering, PEQ, State University of Maringá, Avenida Colombo, Maringá, Paraná, 579087020-900, Brazil
| | - Melissa Gurgel Adeodato Vieira
- School of Chemical Engineering, University of Campinas, Albert Einstein Avenue, Campinas, São Paulo, 50013083-852, Brazil
| |
Collapse
|
6
|
Sharma L, Alam NM, Roy S, Satya P, Kar G, Ghosh S, Goswami T, Majumdar B. Optimization of alkali pretreatment and enzymatic saccharification of jute (Corchorus olitorius L.) biomass using response surface methodology. BIORESOURCE TECHNOLOGY 2023; 368:128318. [PMID: 36375701 DOI: 10.1016/j.biortech.2022.128318] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Revised: 11/07/2022] [Accepted: 11/08/2022] [Indexed: 06/16/2023]
Abstract
Reduction of inherent structural recalcitrance and improved saccharification efficiency are two important facets to enhance fermentable sugar yield for bioethanol production from lignocellulosic biomass. This study optimized alkaline pretreatment and saccharification conditions employing response surface methodology to improve saccharification yield of jute (Corchorus olitorius cv. JROB-2) biomass. The biomass is composed of cellulose (66.6 %), lignin (19.4 %) and hemicellulose (13.1 %). NaOH concentration exhibited significant effect on delignification during pretreatment. The highest delignification (80.42 %) was obtained by pretreatment with 2.47 % NaOH at 55.8 °C for 5.9 h removing 79.8 % lignin and 34.2 % hemicellulose from biomass, thereby increasing cell wall porosity and allowing better accessibility to saccharification enzyme. During saccharification optimization, significant effect was observed for biomass loading, enzyme concentration and temperature. Optimized saccharification condition yielded maximum saccharification (76.48 %) when hydrolysis was performed at 6.9 % biomass loading with enzyme concentration of 49.52 FPU/g substrate at 51.05 °C for 74.46 h.
Collapse
Affiliation(s)
- Laxmi Sharma
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India.
| | - Nurnabi Meherul Alam
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| | - Suman Roy
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| | - Pratik Satya
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| | - Gouranga Kar
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| | - Subhojit Ghosh
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| | - Tinku Goswami
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| | - Bijan Majumdar
- ICAR-Central Research Institute for Jute and Allied Fibres, Barrackpore, Kolkata 700121, India
| |
Collapse
|
7
|
A A, Kumar Sampath M. Optimization of alkali, acid and organic solvent pretreatment on rice husk and its techno economic analysis for efficient sugar production. Prep Biochem Biotechnol 2023; 53:279-287. [PMID: 35635302 DOI: 10.1080/10826068.2022.2078982] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Abstract
Excessive use of fossil fuels has accelerated climate change and global warming necessitates the need for renewable energy sources that have a lower environmental impact. In the recent decade, lignocellulosic biomass has become a prominent alternative to renewable energy resources for the production of bioenergy. The pretreatment procedure is considered a pivotal step for transforming biomass into value-added products such as sugars, biofuels, etc. Therefore, the present work aims to study the effect of different pretreatment approaches on rice husk with acids (H2SO4 and HCl), alkalis (NaOH and KOH), and organic solvents (ethanol and methanol) utilizing different concentrations like (2, 4 and 6% in case of acids), (2,4 and 6% for alkalis) and (50% and 70% for organic solvents) with different residence time (1, 3, 6, and 24 h). The most effective results obtained from the aforementioned steps were further adopted for enzymatic hydrolysis. Further, the changes in structural properties of biomass were assessed in relation to the pretreatment process employing scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier Transform Infrared (FTIR) analyses. This paper also highlights the techno-economic analysis of alkali pretreatment. Additionally, the operational targets for the process were identified by using a modeling software-SuperPro Designer. Results obtained from the study showed a maximum yield of reducing sugar i.e., 1.906 ± 0.2 mg/ml (4% NaOH with 6 h of incubation). This study demonstrates that 4% NaOH pretreatment effectively disintegrates the biomass and yields high sugar recovery which can be used further for the production of biofuels and value-added products.
Collapse
Affiliation(s)
- Anuradha A
- Department of Bioengineering and Biotechnology, Birla Institute of Technology, Mesra, Ranchi, India
| | - Muthu Kumar Sampath
- Department of Bioengineering and Biotechnology, Birla Institute of Technology, Mesra, Ranchi, India
| |
Collapse
|
8
|
Multifaceted Analysis of the Use of Catalytic Additives for Combustion with Hemp Pellets in a Low-Power Boiler. ENERGIES 2022. [DOI: 10.3390/en15062034] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
This paper presents the results of a multifaceted analysis of the application of catalytic additives to hemp pellets’ combustion in a low-power boiler. The research concerns the effects of five catalytic additives applied inside the boiler’s combustion chamber—based on TiO2, MnO2, Cu(NO3)2 × 3H2O, H2PtCl6 solution, and 99.5% pure urea solution—on the quality of hemp pellets’ combustion process. For this purpose, technical and elemental analyses of the used fuel were performed. The chemical composition of exhaust gases (NOx, CO, SO2, and PM content) was also examined using an exhaust gas analyzer and a dust meter. The highest reductions in emissions of individual pollutants were for CO (−113%; combustion with Ad3), NOx (−66%; combustion with Ad 4), SO2 (−48%; combustion with Ad3), and PM (−78%; combustion with Ad1). The study also determined the amount of avoided costs due to the use of catalytic additives, as well as the annual prevented CO2 emissions to the atmosphere. Due to rising fuel and energy prices, this study could be helpful for biomass boiler owners who would like to burn locally available raw materials and increase the combustion process’ efficiency.
Collapse
|
9
|
Polish Varieties of Industrial Hemp and Their Utilisation in the Efficient Production of Lignocellulosic Ethanol. Molecules 2021; 26:molecules26216467. [PMID: 34770876 PMCID: PMC8587792 DOI: 10.3390/molecules26216467] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/10/2021] [Revised: 10/18/2021] [Accepted: 10/21/2021] [Indexed: 12/02/2022] Open
Abstract
Nowadays, more and more attention is paid to the development and the intensification of the use of renewable energy sources. Hemp might be an alternative plant for bioenergy production. In this paper, four varieties of Polish industrial hemp (Białobrzeskie, Tygra, Henola, and Rajan) were investigated in order to determine which of them are the most advantageous raw materials for the effective production of bioethanol. At the beginning, physical and chemical pretreatment of hemp biomass was carried out. It was found that the most effective is the alkaline treatment with 2% NaOH, and the biomasses of the two varieties were selected for next stages of research: Tygra and Rajan. Hemp biomass before and after pretreatment was analyzed by FTIR and SEM, which confirmed the effectiveness of the pretreatment. Next, an enzymatic hydrolysis process was carried out on the previously selected parameters using the response surface methodology. Subsequently, the two approaches were analyzed: separated hydrolysis and fermentation (SHF) and a simultaneous saccharification and fermentation (SSF) process. For Tygra biomass in the SHF process, the ethanol concentration was 10.5 g∙L−1 (3.04 m3·ha−1), and for Rajan biomass at the SSF process, the ethanol concentration was 7.5 g∙L−1 (2.23 m3·ha−1). In conclusion, the biomass of Polish varieties of hemp, i.e., Tygra and Rajan, was found to be an interesting and promising raw material for bioethanol production.
Collapse
|
10
|
Batog J, Bujnowicz K, Gieparda W, Wawro A, Rojewski S. Effective Utilisation of Halophyte Biomass from Saline Soils for Biorefinering Processes. Molecules 2021; 26:molecules26175393. [PMID: 34500826 PMCID: PMC8434430 DOI: 10.3390/molecules26175393] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2021] [Revised: 08/26/2021] [Accepted: 08/31/2021] [Indexed: 11/16/2022] Open
Abstract
The salinity of European soil is increasing every year, causing severe economic damage (estimated 1-3 million hectares in the enlarged EU). This study uses the biomass of halophytes-tall fescue (grass) and hemp of the Białobrzeskie variety from saline soils-for bioenergy, second generation biofuels and designing new materials-fillers for polymer composites. In the bioethanol obtaining process, in the first stage, the grass and hemp biomass were pretreated with 1.5% NaOH. Before and after the treatment, the chemical composition was determined and the FTIR spectra and SEM pictures were taken. Then, the process of simultaneous saccharification and fermentation (SSF) was carried out. The concentration of ethanol for both the grass and hemp biomass was approx. 7 g·L-1 (14 g·100 g-1 of raw material). In addition, trials of obtaining green composites with halophyte biomass using polymers (PP) and biopolymers (PLA) as a matrix were performed. The mechanical properties of the composites (tensile and flexural tests) were determined. It was found that the addition of a compatibilizer improved the adhesion at the interface of PP composites with a hemp filler. In conclusion, the grass and hemp biomass were found to be an interesting and promising source to be used for bioethanol and biocomposites production. The use of annually renewable plant biomass from saline soils for biorefinering processes opens up opportunities for the development of a new value chains and new approaches to sustainable agriculture.
Collapse
|
11
|
Recent Advancements in Biological Conversion of Industrial Hemp for Biofuel and Value-Added Products. FERMENTATION 2021. [DOI: 10.3390/fermentation7010006] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022] Open
Abstract
Sustainable, economically feasible, and green resources for energy and chemical products have people’s attention due to global energy demand and environmental issues. Last several decades, diverse lignocellulosic biomass has been studied for the production of biofuels and biochemicals. Industrial hemp has great market potential with its versatile applications. With the increase of the hemp-related markets with hemp seed, hemp oil, and fiber, the importance of hemp biomass utilization has also been emphasized in recent studies. Biological conversions of industrial hemp into bioethanol and other biochemicals have been introduced to address the aforementioned energy and environmental challenges. Its high cellulose content and the increased production because of the demand for cannabidiol oil and hempseed products make it a promising future bioenergy and biochemical source. Effective valorization of the underutilized hemp biomass can also improve the cost-competitiveness of hemp products. This manuscript reviews recent biological conversion strategies for industrial hemp and its characteristics. Current understanding of the industrial hemp properties and applied conversion technologies are briefly summarized. In addition, challenges and future perspectives of the biological conversion with industrial hemp are discussed.
Collapse
|
12
|
Berchem T, Schmetz Q, Lepage T, Richel A. Single and Mixed Feedstocks Biorefining: Comparison of Primary Metabolites Recovery and Lignin Recombination During an Alkaline Process. Front Chem 2020; 8:479. [PMID: 32582644 PMCID: PMC7292014 DOI: 10.3389/fchem.2020.00479] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2019] [Accepted: 05/08/2020] [Indexed: 11/13/2022] Open
Abstract
Cannabis sp. and Euphorbia sp. are potential candidates as indoor culture for the extraction of their high value-added metabolites for pharmaceutical applications. Both residual lignocellulosic materials recovered after extraction are studied in the present article as single or mixed feedstocks for a closed-loop bioprocesses cascade. An alkaline process (NaOH 3%, 30 min 160°C) is performed to separate the studied biomasses into their main components: lignin and cellulose. Results highlight the advantages of the multi-feedstocks approach over the single biomass in term of lignin yield and purity. Since the structural characteristics of lignin affect the potential applications, a particular attention is drawn on the comprehension of lignin structure alteration and the possible interaction between them during single or mixed feedstocks treatment. FTIR and 2D-NMR spectra revealed similar profiles in term of chemical functions and structure rather than novel chemical bonds formation inexistent in the original biomasses. In addition, thermal properties and molecular mass distribution are conserved whether hemp or euphorbia are single treated or in combination. A second treatment was applied to investigate the effect of prolonged treatment on extracted lignins and the possible interactions. Aggregation, resulting in higher molecular mass, is observed whatever the feedstocks combination. However, mixing biomass does not affect chemical structures of the end product. Therefore, our paper suggests the possibility of gathering lignocellulosic residues during alkali process for lignin extraction and valorization, allowing to forecast lignin structure and make assumptions regarding potential valorization pathway.
Collapse
|