Development of a Three-Dimensional Bioengineered Platform for Articular Cartilage Regeneration

3D Bioprinting of Biomimetic Alginate/Gelatin/Chondroitin Sulfate Hydrogel Nanocomposites for Intrinsically Chondrogenic Differentiation of Human Mesenchymal Stem Cells

3D-printed hydrogel scaffolds biomimicking the extracellular matrix (ECM) are key in cartilage tissue engineering as they can enhance the chondrogenic differentiation of mesenchymal stem cells (MSCs) through the presence of active nanoparticles such as graphene oxide (GO). Here, biomimetic hydrogels were developed by cross-linking alginate, gelatin, and chondroitin sulfate biopolymers in the presence of GO as a bioactive filler, with excellent processability for developing bioactive 3D printed scaffolds and for the bioprinting process. A novel bioink based on our hydrogel with embedded human MSCs presented a cell survival rate near 100% after the 3D bioprinting process. The effects of processing and filler concentration on cell differentiation were further quantitatively evaluated. The nanocomposited hydrogels render high MSC proliferation and viability, exhibiting intrinsic chondroinductive capacity without any exogenous factor when used to print scaffolds or bioprint constructs. The bioactivity depended on the GO concentration, with the best performance at 0.1 mg mL-1. These results were explained by the rational combination of the three biopolymers, with GO nanoparticles having carboxylate and sulfate groups in their structures, therefore, biomimicking the highly negatively charged ECM of cartilage. The bioactivity of this biomaterial and its good processability for 3D printing scaffolds and 3D bioprinting techniques open up a new approach to developing novel biomimetic materials for cartilage repair.

Effects of self-assembled type II collagen fibrils on the morphology and growth of pre-chondrogenic ATDC5 cells

Objective

Although type II collagen could have marked potential for developing cartilage tissue engineering (CTE) scaffolds, its erratic supply and viscous nature have limited these studies, and there are no studies on the use of marine-derived type II collagen fibrils for CTE scaffold materials. In this study, we aimed to generate a fibril-based, thin-layered scaffold from marine-derived type II collagen and investigate its chondrogenic potential.

Methods

Time-lapse observations revealed the cell adhesion process. The Cell Counting Kit-8 (CCK-8) assay, light microscopy, and scanning electron microscopy were performed to detect proliferation and filopodium morphology. Alcian blue staining was used to show the deposition of extracellular secretions, and qRT-PCR was performed to reveal the expression levels of chondrogenesis-related genes.

Results

The cell adhesion speed was similar in both fibril-coated and control molecule-coated groups, but the cellular morphology, proliferation, and chondrogenesis activity differed. On fibrils, more elongated finer filopodia showed inter-cell communications, whereas the slower proliferation suggested an altered cell cycle. Extracellular secretions occurred before day 14 and continued until day 28 on fibrils, and on fibrils, the expression of the chondrogenesis-related genes Sox9 (p ​< ​0.001), Col10a1 (p ​< ​0.001), Acan (p ​< ​0.001), and Col2a1 (p ​= ​0.0049) was significantly upregulated on day 21.

Conclusion

Marine-derived type II collagen was, for the first time, fabricated into a fibril state. It showed rapid cellular affinity and induced chondrogenesis with extracellular secretions. We presented a new model for studying chondrogenesis in vitro and a potential alternative material for cell-laden CTE research.

Supramolecular Peptide Nanofiber Hydrogels for Bone Tissue Engineering: From Multihierarchical Fabrications to Comprehensive Applications

Bone tissue engineering is becoming an ideal strategy to replace autologous bone grafts for surgical bone repair, but the multihierarchical complexity of natural bone is still difficult to emulate due to the lack of suitable biomaterials. Supramolecular peptide nanofiber hydrogels (SPNHs) are emerging biomaterials because of their inherent biocompatibility, satisfied biodegradability, high purity, facile functionalization, and tunable mechanical properties. This review initially focuses on the multihierarchical fabrications by SPNHs to emulate natural bony extracellular matrix. Structurally, supramolecular peptides based on distinctive building blocks can assemble into nanofiber hydrogels, which can be used as nanomorphology-mimetic scaffolds for tissue engineering. Biochemically, bioactive motifs and bioactive factors can be covalently tethered or physically absorbed to SPNHs to endow various functions depending on physiological and pharmacological requirements. Mechanically, four strategies are summarized to optimize the biophysical microenvironment of SPNHs for bone regeneration. Furthermore, comprehensive applications about SPNHs for bone tissue engineering are reviewed. The biomaterials can be directly used in the form of injectable hydrogels or composite nanoscaffolds, or they can be used to construct engineered bone grafts by bioprinting or bioreactors. Finally, continuing challenges and outlook are discussed.

Current Advances in the Regeneration of Degenerated Articular Cartilage: A Literature Review on Tissue Engineering and Its Recent Clinical Translation

Functional ability is the basis of healthy aging. Articular cartilage degeneration is amongst the most prevalent degenerative conditions that cause adverse impacts on the quality of life; moreover, it represents a key predisposing factor to osteoarthritis (OA). Both the poor capacity of articular cartilage for self-repair and the unsatisfactory outcomes of available clinical interventions make innovative tissue engineering a promising therapeutic strategy for articular cartilage repair. Significant progress was made in this field; however, a marked heterogeneity in the applied biomaterials, biofabrication, and assessments is nowadays evident by the huge number of research studies published to date. Accordingly, this literature review assimilates the most recent advances in cell-based and cell-free tissue engineering of articular cartilage and also focuses on the assessments performed via various in vitro studies, ex vivo models, preclinical in vivo animal models, and clinical studies in order to provide a broad overview of the latest findings and clinical translation in the context of degenerated articular cartilage and OA.

Endogenous Repair and Regeneration of Injured Articular Cartilage: A Challenging but Promising Therapeutic Strategy

Articular cartilage (AC) has a very limited intrinsic repair capacity after injury or disease. Although exogenous cell-based regenerative approaches have obtained acceptable outcomes, they are usually associated with complicated procedures, donor-site morbidities and cell differentiation during ex vivo expansion. In recent years, endogenous regenerative strategy by recruiting resident mesenchymal stem/progenitor cells (MSPCs) into the injured sites, as a promising alternative, has gained considerable attention. It takes full advantage of body's own regenerative potential to repair and regenerate injured tissue while avoiding exogenous regenerative approach-associated limitations. Like most tissues, there are also multiple stem-cell niches in AC and its surrounding tissues. These MSPCs have the potential to migrate into injured sites to produce replacement cells under appropriate stimuli. Traditional microfracture procedure employs the concept of MSPCs recruitment usually fails to regenerate normal hyaline cartilage. The reasons for this failure might be attributed to an inadequate number of recruiting cells and adverse local tissue microenvironment after cartilage injury. A strategy that effectively improves local matrix microenvironment and recruits resident MSPCs may enhance the success of endogenous AC regeneration (EACR). In this review, we focused on the reasons why AC cannot regenerate itself in spite of potential self-repair capacity and summarized the latest developments of the three key components in the field of EACR. In addition, we discussed the challenges facing in the present EACR strategy. This review will provide an increasing understanding of EACR and attract more researchers to participate in this promising research arena.

Applications of 3D printed bone tissue engineering scaffolds in the stem cell field

Due to traffic accidents, injuries, burns, congenital malformations and other reasons, a large number of patients with tissue or organ defects need urgent treatment every year. The shortage of donors, graft rejection and other problems cause a deficient supply for organ and tissue replacement, repair and regeneration of patients, so regenerative medicine came into being. Stem cell therapy plays an important role in the field of regenerative medicine, but it is difficult to fill large tissue defects by injection alone. The scientists combine three-dimensional (3D) printed bone tissue engineering scaffolds with stem cells to achieve the desired effect. These scaffolds can mimic the extracellular matrix (ECM), bone and cartilage, and eventually form functional tissues or organs by providing structural support and promoting attachment, proliferation and differentiation. This paper mainly discussed the applications of 3D printed bone tissue engineering scaffolds in stem cell regenerative medicine. The application examples of different 3D printing technologies and different raw materials are introduced and compared. Then we discuss the superiority of 3D printing technology over traditional methods, put forward some problems and limitations, and look forward to the future.

Development and Angiogenic Potential of Cell-Derived Microtissues Using Microcarrier-Template

Tissue engineering and regenerative medicine approaches use biomaterials in combination with cells to regenerate lost functions of tissues and organs to prevent organ transplantation. However, most of the current strategies fail in mimicking the tissue's extracellular matrix properties. In order to mimic native tissue conditions, we developed cell-derived matrix (CDM) microtissues (MT). Our methodology uses poly-lactic acid (PLA) and Cultispher® S microcarriers' (MCs') as scaffold templates, which are seeded with rat bone marrow mesenchymal stem cells (rBM-MSCs). The scaffold template allows cells to generate an extracellular matrix, which is then extracted for downstream use. The newly formed CDM provides cells with a complex physical (MT architecture) and biochemical (deposited ECM proteins) environment, also showing spontaneous angiogenic potential. Our results suggest that MTs generated from the combination of these two MCs (mixed MTs) are excellent candidates for tissue vascularization. Overall, this study provides a methodology for in-house fabrication of microtissues with angiogenic potential for downstream use in various tissue regenerative strategies.

Modeling the photodynamic effect in 2D versus 3D cell culture under normoxic and hypoxic conditions

BACKGROUND

Photodynamic therapy (PDT), mainly as a combined therapy, can still be considered a promising technology for targeted cancer treatment. Besides the several and essential benefits of PDT, there are some concerns and limitations, such as complex dosimetry, tumor hypoxia, and other mechanisms of resistance. In this study, we present how the cell culture model and cell culture conditions may affect the response to PDT treatment. It was studied by applying two different 3D cell culture, non-scaffold, and hydrogel-based models under normoxic and hypoxic conditions. In parallel, a detailed mechanism of the action of zinc phthalocyanine M2TG3 was presented.

METHODS

Hydrogel-based and tumor spheroids consisting of LNCaP cells, were used as 3D cell culture models in experiments performed under normoxic and hypoxic (1% of oxygen) conditions. Several analyses were performed to compare the activity of M2TG3 under different conditions, such as cytotoxicity, the level of proapoptotic and stress-related proteins, caspase activity, and antioxidant gene expression status. Additionally, we tested bioluminescence and fluorescence assays as a useful approach for a hydrogel-based 3D cell culture.

RESULTS

We found that M2TG3 might lead to apoptotic cancer cell death and is strongly dependent on the model and oxygen availability. Moreover, the expression of the genes modulated in the antioxidative system in 2D and 3D cell culture models were presented. The tested bioluminescence assay revealed several advantages, such as repetitive measurements on the same sample and simultaneous analysis of different parameters due to the non-lysing nature of this assay.

CONCLUSIONS

It was shown that M2TG3 can effectively cause cancer cell death via a different mechanism, depending on cell culture conditions such as the model and oxygen availability.

Mesenchymal stem cells for cartilage regeneration

Cartilage injuries are typically caused by trauma, chronic overload, and autoimmune diseases. Owing to the avascular structure and low metabolic activities of chondrocytes, cartilage generally does not self-repair following an injury. Currently, clinical interventions for cartilage injuries include chondrocyte implantation, microfracture, and osteochondral transplantation. However, rather than restoring cartilage integrity, these methods only postpone further cartilage deterioration. Stem cell therapies, especially mesenchymal stem cell (MSCs) therapies, were found to be a feasible strategy in the treatment of cartilage injuries. MSCs can easily be isolated from mesenchymal tissue and be differentiated into chondrocytes with the support of chondrogenic factors or scaffolds to repair damaged cartilage tissue. In this review, we highlighted the full success of cartilage repair using MSCs, or MSCs in combination with chondrogenic factors and scaffolds, and predicted their pros and cons for prospective translation to clinical practice.