Ion-Imprinted Polymer-on-a-Sensor for Copper Detection

Calcium-Based Metal-Organic Framework: Detection and Idiosyncratic Removal of Copper by Nano-Particle Deposition

A novel calcium-based metal-organic framework (CaMOF@LSB) was designed and synthesized, exhibiting dual functionality for both selective detection and removal of Cu2+ ions from aqueous solutions. The framework's stability, including solvent and pH variations, was established with notable thermal resilience. Colorimetric Cu2+ detection (≥5 ppm) with a high capture capacity of 484.2 mg g-1 by CaMOF@LSB places this material among the few that ensure efficient colorimetric detection and high removal capabilities of Cu2+ ions. Batch adsorption experiments revealed pH-dependent behavior and competitive interactions. Langmuir and pseudo-second-order kinetics models aptly described adsorption isotherms and kinetics, respectively. Thermodynamic assessments confirmed spontaneous and endothermic adsorption. Mechanistically, nanoparticle deposition contributes to the Cu2+ uptake. CaMOF@LSB also exhibited one of the best removal behaviour of Cu2+ by means of oxide formation on the surface. Regeneration of CaMOF@LSB was achieved by simple sonication in 0.1 M aqueous NaOH solution. The recyclability was also tested up to 5 cycles, and it exhibited a small decrease in adsorption capacity observed across the cycles. This research presents a promising avenue for addressing heavy metal pollution using metal-organic frameworks, thereby offering potential applications in water purification and environmental pollution monitoring and remediation.

Microplastic contaminants detection in aquatic environment by hydrophobic cerium oxide nanoparticles

Microplastics (MPs) poses a significant threat to ecosystems and human health, demanding immediate attention. The reported research work offers an effective and low cost method towards the detection of toxic MPs. In this study, hydrophobic cerium oxide nanoparticles (CeO2 NPs) are synthesized and applied as promising electrode material for the detection of two different types of MPs, i.e. polyethylene (PE) and polypropylene (PP). Through electrochemical analyses, such as cyclic voltammetry (CV) and linear sweep voltammetry (LSV), hydrophobic CeO2 NPs modified glassy carbon electrode (GCE) based sensor demonstrated remarkable sensitivity of ∼0.0343 AmLmg-1cm-2 and detection limit of ∼0.226 mgmL-1, with promising correlation coefficient (R2) towards the detection of PE (∼27-32 μm). Furthermore, hydrophobic CeO2 NPs modified GCE exhibited promising stability and reproducibility towards PE (∼27-32 μm), suggesting the promising potential of hydrophobic CeO2 NPs as electrode materials for an electrochemical microplastics detection.

Biosensing Platforms for Cardiac Biomarker Detection

Myocardial infarction (MI) is a cardiovascular disease that occurs when there is an elevated demand for myocardial oxygen as a result of the rupture or erosion of atherosclerotic plaques. Globally, the mortality rates associated with MI are steadily on the rise. Traditional diagnostic biomarkers employed in clinical settings for MI diagnosis have various drawbacks, prompting researchers to investigate fast, precise, and highly sensitive biosensor platforms and technologies. Biosensors are analytical devices that combine biological elements with physicochemical transducers to detect and quantify specific compounds or analytes. These devices play a crucial role in various fields including healthcare, environmental monitoring, food safety, and biotechnology. Biosensors developed for the detection of cardiac biomarkers are typically electrochemical, mass, and optical biosensors. Nanomaterials have emerged as revolutionary components in the field of biosensing, offering unique properties that significantly enhance the sensitivity and specificity of the detection systems. This review provides a comprehensive overview of the advancements and applications of nanomaterial-based biosensing systems. Beginning with an exploration of the fundamental principles governing nanomaterials, we delve into their diverse properties, including but not limited to electrical, optical, magnetic, and thermal characteristics. The integration of these nanomaterials as transducers in biosensors has paved the way for unprecedented developments in analytical techniques. Moreover, the principles and types of biosensors and their applications in cardiovascular disease diagnosis are explained in detail. The current biosensors for cardiac biomarker detection are also discussed, with an elaboration of the pros and cons of existing platforms and concluding with future perspectives.

A novel colorimetric/fluorescent dual-signal probe based on silver nanoparticles functionalized with L-cysteine and rhodamine 6G derivatives for copper ion detection and cell imaging

The dual-signal probe utilizing functionalized silver nanoparticles (AgNPs) is a promising sensing tool. Herein, a novel colorimetric/fluorescent dual-signal probe (AgNPs-L-Cys-Rh6G2) was fabricated for copper ion (Cu2+) detection and cell imaging by using L-cysteine as a "bridge" to connect AgNPs and rhodamine 6G derivatives. The AgNPs-L-Cys-Rh6G2 probe exhibits a dual-signal response to Cu2+ due to Rh6G2 hydrolysis, resulting in a high fluorescence response and a significant change in color from light yellow to pink under sunlight. The linear detection ranges of the AgNPs-L-Cys-Rh6G2 probe for Cu2+ were 100-450 μM and 150-650 μM using fluorescent and colorimetry methods, respectively. The detection limits were as low as 0.169 μM and 1.36 μM, respectively. Meanwhile, the proposed probe was applied to detect Cu2+ in the actual sediment with satisfactory recovery and low relative standard deviation. Furthermore, the probe was further employed for fluorescence imaging in HeLa cells. In brief, the developed AgNPs-L-Cys-Rh6G2 sensing platform can be used for simultaneous Cu2+ determination and cell imaging.

Electroactive poly(thionine) as imprinted polymer and reference probe simultaneously for ratiometric ion imprinted electrochemical Pb2+sensor

In this work, an electrochemical sensor based on ion-imprinted polymer/Au nanoparticles/porous biochar (IIP/AuNPs/PBC) composite was proposed for the highly selective and sensitive detection of Pb2+. In this work, poly (thionine) (pTHI) served simultaneously as imprinted polymer and reference probe. It could not only realize the specific detection of Pb2+, but also provide an internal reference signal to eliminate the influence of human and environmental factors on the detection signal and further improve the stability of the sensor. In addition, the AuNPs/PBC composite with large specific surface area, excellent electron transport and electrocatalytic performance could effectively enhance the detection signal as a carrier material. At the same time, the AuNPs on the PBC surface would promote the formation of uniform and stable IIP through Au-S bonds. The synergistic effect between IIP, AuNPs/PBC and ratiometric signal mode gave the Pb2+sensor excellent performance, including a wide linear range (0.1-1000μg l-1), low detection limit (0.03μg l-1, S/N = 3), excellent selectivity and stability. All these results indicate that the proposed sensor could provide a meaningful reference for highly selective detection of heavy metal ions (HMIs).

A colorimetric and fluorometric dual-mode probe for Cu2+detection based on functionalized silver nanoparticles

A novel colorimetric/fluorescent probe (AgNPs-GSH-Rh6G2) was prepared by linking silver nanoparticles (AgNPs) with rhodamine 6G derivative (Rh6G2) using glutathione (GSH) as a linker molecule. The prepared probe showed obvious fluorescence change and colorimetric response after adding copper ions. Based on this phenomenon, a colorimetric/fluorescence dual-mode detection method was constructed to recognize copper ions. The linear ranges of fluorescence detection and colorimetric detection were 0.10 to 0.45 mM and 0.15 to 0.65 mM, respectively, and the limit of detection were 0.18 μM and 24.90 μΜ. In addition, the dual-mode probe has achieved satisfactory results in the detection of copper ions in sediment samples. The successful construction of AgNPs-GSH-Rh6G2 not only provide a reliable tool for the detection of copper ions, but also shed light on a new idea for the multi-mode development of the detection platform.

In situ synthesis and dynamic simulation of molecularly imprinted polymeric nanoparticles on a micro-reactor system

Current practices in synthesizing molecularly imprinted polymers face challenges-lengthy process, low-productivity, the need for expensive and sophisticated equipment, and they cannot be controlled in situ synthesis. Herein, we present a micro-reactor for in situ and continuously synthesizing trillions of molecularly imprinted polymeric nanoparticles that contain molecular fingerprints of bovine serum albumin in a short period of time (5-30 min). Initially, we performed COMSOL simulation to analyze mixing efficiency with altering flow rates, and experimentally validated the platform for synthesizing nanoparticles with sizes ranging from 52-106 nm. Molecular interactions between monomers and protein were also examined by molecular docking and dynamics simulations. Afterwards, we benchmarked the micro-reactor parameters through dispersity and concentration of molecularly imprinted polymers using principal component analysis. Sensing assets of molecularly imprinted polymers were examined on a metamaterial sensor, resulting in 81% of precision with high selectivity (4.5 times), and three cycles of consecutive use. Overall, our micro-reactor stood out for its high productivity (48-288 times improvement in assay-time and 2 times improvement in reagent volume), enabling to produce 1.4-1.5 times more MIPs at one-single step, and continuous production compared to conventional strategy.

Tuning anion binding properties of Bis(indolyl)methane Receptors: Effect of substitutions on optical responses

Chromogenic probes based onoxidizedbis(indolyl)methanes have been synthesized with varying substituents (R = -Me [1], -OMe [2], -OH, [3]) on the central aryl ring. In addition to electronic influence, the involvement of substituents in ion-dipole and charge-assisted hydrogen bonding interactions significantly alters the solvatochromic response and pH-sensitive behavior. In polar aprotic solvents, like CH₃CN, a concentration-dependent stepwise color change was observed with F^- ions. In the case of2, a reversible hydrogen bonding interaction between the deprotonated probe and HF₂^- dimer might be responsible for that, while step-wise deprotonation caused by F^- ions could be the probable reason with3. Since the formation of HF₂^- is energetically unfavorable in a polar protic solvent, the response of 2 with F^- ions appears to be very different in EtOH medium. Interestingly, no such alteration in anion sensing behavior was noticed with3going from an aprotic to a protic solvent.

A Novel D-π-A Type Fluorescent Probe for Cu2+ Based on Styryl-Pyridinium Salts Conjugating Di-(2-picolyl)amine (DPA) Units

A novel D-π-A type fluorescent probe L(NO₃) for Cu (II) sensing was designed and fully characterized. The probe consists of a styryl-pyridine cation fluorescent group and a di-(2-picolyl)amine (DPA) receptor unit, which are linked by a phenyl group to form an electron donor-π-acceptor (D-π-A) conjugate system, especially the introduction of a nitrate counter anion for significantly enhanced water solubility of the probe. Fluorescence titration studies of the probe L(NO₃) showed a higher selectivity for Cu²⁺ than other metal ions, and the emission spectrum was strongly quenched upon binding. The competitive binding assay and the low detection limit (0.932 µM) showed that the probe L(NO₃) had strong anti-interference ability and excellent Cu²⁺ detection performance. The binding ratio of probe L(NO₃) and Cu²⁺ was determined from Job's plot to be 1:1, which is consistent with the results obtained from X-ray crystal structures. Meanwhile, the probe showed instantaneous chemical reversibility when titrated with EDTA solution, indicating potential recycling properties of the probe. In addition, the design of inexpensive fluorescent test strips can perform the on-site and real-time detection Cu²⁺ with a color recognition application.

A surface plasmon resonance sensor with synthetic receptors decorated on graphene oxide for selective detection of benzylpenicillin

Antibiotic residues in foods, water and the environment reveal antibiotic-resistant bacterial strains, disrupting the ecological balance and causing serious health problems. For these reasons, the detection of antibiotic residues is crucial for the protection of human health. Herein, the detection of benzylpenicillin antibiotic from aqueous and milk sample solutions was carried out by surface plasmon resonance (SPR) sensor using synthetic receptor-molecularly imprinted polymer. The benzylpenicillin-imprinted poly(hydroxyethyl methacrylate-graphene oxide-N-methacryloyl-l-phenylalanine) (MIP-GO) SPR sensor was prepared. Benzylpenicillin detection was performed by MIP-GO SPR sensor in a 1-100 ppb concentration range of benzylpenicillin with 0.9665 linear correlation and 0.021 ppb detection limit. Selectivity analysis showed that the MIP-GO SPR sensor detected the benzylpenicillin molecule 8.16 times more selectively than amoxicillin and 14.04 times more selectively than ampicillin. To examine the imprinting efficiency, non-imprinted poly(hydroxyethyl methacrylate-graphene oxide-N-methacryloyl-l-phenylalanine) (NIP-GO) SPR sensor was also prepared using the same procedure without benzylpenicillin addition. Since graphene oxide (GO) was added to enhance the sensor signal response by increasing sensitivity, the control analyses were performed by a poly(hydroxyethyl methacrylate-N-methacryloyl-l-phenylalanine) (MIP) SPR sensor without adding GO. Moreover, repeatability studies of MIP-GO SPR sensor were statistically evaluated and the RSD of intra-day assays less than 1% specified that there was no loss of performance for the benzylpenicillin detection ability even after four cycles. As a real food sample analysis, the benzylpenicillin spiked and unspiked milk samples were evaluated and high-performance liquid chromatography experiments were carried out for validation.

Recent Advances of Optical Sensors for Copper Ion Detection

A trace element copper (Cu2+) ion is the third most plentiful metal ion that necessary for all living organisms and playing a critical role in several processes. Nonetheless, according to cellular needs, deficient or excess Cu2+ ion cause various diseases. For all these reasons, optical sensors have been focused rapid Cu2+ ion detection in real-time with high selectivity and sensitivity. Optical sensors can measure fluorescence in the refractive index-adsorption from the relationships between light and matter. They have gained great attention in recent years due to the excellent advantages of simple and naked eye recognition, real-time detection, low cost, high specificity against analytes, a quick response, and the need for less complex equipment in analysis. This review aims to show the significance of Cu2+ ion detection and electively current trends in optical sensors. The integration of optical sensors with different systems, such as microfluidic systems, is mentioned, and their latest studies in medical and environmental applications also are depicted. Conclusions and future perspectives on these advances is added at the end of the review.

A Critical Review on the Use of Molecular Imprinting for Trace Heavy Metal and Micropollutant Detection

Molecular recognition has been described as the “ultimate” form of sensing and plays a fundamental role in biological processes. There is a move towards biomimetic recognition elements to overcome inherent problems of natural receptors such as limited stability, high-cost, and variation in response. In recent years, several alternatives have emerged which have found their first commercial applications. In this review, we focus on molecularly imprinted polymers (MIPs) since they present an attractive alternative due to recent breakthroughs in polymer science and nanotechnology. For example, innovative solid-phase synthesis methods can produce MIPs with sometimes greater affinities than natural receptors. Although industry and environmental agencies require sensors for continuous monitoring, the regulatory barrier for employing MIP-based sensors is still low for environmental applications. Despite this, there are currently no sensors in this area, which is likely due to low profitability and the need for new legislation to promote the development of MIP-based sensors for pollutant and heavy metal monitoring. The increased demand for point-of-use devices and home testing kits is driving an exponential growth in biosensor production, leading to an expected market value of over GPB 25 billion by 2023. A key requirement of point-of-use devices is portability, since the test must be conducted at “the time and place” to pinpoint sources of contamination in food and/or water samples. Therefore, this review will focus on MIP-based sensors for monitoring pollutants and heavy metals by critically evaluating relevant literature sources from 1993 to 2022.

Selective Amplification of Plasmonic Sensor Signal for Cortisol Detection Using Gold Nanoparticles

Herein, gold nanoparticles (AuNP)-modified cortisol-imprinted (AuNP-MIP) plasmonic sensor was developed for signal amplification and real-time cortisol determination in both aqueous and complex solutions. Firstly, the sensor surfaces were modified with 3-(trimethoxylyl)propyl methacrylate and then pre-complex was prepared using the functional monomer N-methacryloyl-L-histidine methyl ester. The monomer solution was made ready for polymerization by adding 2-hydroxyethyl methacrylate to ethylene glycol dimethacrylate. In order to confirm the signal enhancing effect of AuNP, only cortisol-imprinted (MIP) plasmonic sensor was prepared without AuNP. To determine the selectivity efficiency of the imprinting process, the non-imprinted (AuNP-NIP) plasmonic sensor was also prepared without cortisol. The characterization studies of the sensors were performed with atomic force microscopy and contact angle measurements. The kinetic analysis of the AuNP-MIP plasmonic sensor exhibited a high correlation coefficient (R² = 0.97) for a wide range (0.01–100 ppb) with a low detection limit (0.0087 ppb) for cortisol detection. Moreover, the high imprinting efficiency (k′ = 9.67) of the AuNP-MIP plasmonic sensor was determined by comparison with the AuNP-NIP plasmonic sensor. All kinetic results were validated and confirmed by HPLC.