1
|
Maleki F, Razmi H, Rashidi MR, Yousefi M, Ramezani S, Ghorbani M. Electrospun EU/HPMC nanofibers decorated by ZIF-8 nanoparticle as the advanced electrochemical biosensor modifier for sensitive and selective detection of c-MET cancer biomarker in human plasma sample. Biosens Bioelectron 2024; 257:116319. [PMID: 38669845 DOI: 10.1016/j.bios.2024.116319] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2023] [Revised: 04/09/2024] [Accepted: 04/18/2024] [Indexed: 04/28/2024]
Abstract
This research presents a selective and sensitive electrochemical biosensor for the detection of the mesenchymal-epithelial transition factor (c-MET). The biosensing is based on a modification of the SPCE (screen-printed carbon electrode) with the electrospun nanofiber containing eudragit (EU), hydroxypropyl methylcellulose (HPMC), and Zeolite imidazolate frameworks (ZIF-8) nanoparticles. EU/HPMC/ZIF-8 nanofibers have presented a high capability of electron transfer, and more active surface area than bare SPCE due to synergistic effects between EU, HPMC, and ZIF-8. On the other hand, EU/HPMC nanofibers provided high porosity, flexible structures, high specific surface area, and good mechanical strength. The presence of ZIF-8 nanoparticles improved the immobilization of anti-c-MET on the modified SPCE and also resulted in increasing the conductivity. By c-MET incubation on the modified SPCE, c-MET was connected to anti-c-MET, and consequently the electrochemical signal of [Fe(CN)6]3-/4- as the anion redox probe was reduced. In order to investigate the structural and morphological characteristics and elemental composition of electrospun nanofibers, various characterization methods including FE-SEM, XRD, FTIR, and EDS were used. Under optimum conditions with a working potential range -0.3-0.6 V (vs. Ag/AgCl), linear range (LR), correlation coefficient (R2), sensitivity, and limit of detection (LOD) were acquired at 100 fg/mL-100 ng/mL, 0.9985, 53.28 μA/cm2.dec, and 1.28 fg/mL, respectively. Moreover, the mentioned biosensor was investigated in a human plasma sample to determine c-MET and showed ideal results including reproducibility, stability, and good selectivity against other proteins.
Collapse
Affiliation(s)
- Fatemeh Maleki
- Department of Chemistry, Faculty of Basic Sciences, Azarbaijan Shahid Madani University, 53714-161, Tabriz, Iran
| | - Habib Razmi
- Department of Chemistry, Faculty of Basic Sciences, Azarbaijan Shahid Madani University, 53714-161, Tabriz, Iran.
| | | | - Mehdi Yousefi
- Department of Immunology, School of Medicine, Tabriz University of Medical Science, Tabriz, Iran
| | - Soghra Ramezani
- Faculty of Textile Engineering, Urmia University of Technology, Urmia 5716693188, Iran
| | - Marjan Ghorbani
- Iran Polymer and Petrochemical Institute, PO Box:14965/115, Tehran, Iran.
| |
Collapse
|
2
|
Li D, Wei H, Hong R, Yue X, Dong L, Fan K, Yu J, Yao D, Xu H, Lu J, Wang G. WS 2 nanosheets-based electrochemical biosensor for highly sensitive detection of tumor marker miRNA-4484. Talanta 2024; 274:125965. [PMID: 38552480 DOI: 10.1016/j.talanta.2024.125965] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2023] [Revised: 03/18/2024] [Accepted: 03/20/2024] [Indexed: 05/04/2024]
Abstract
In this paper, a few-layer WS2 nanosheets-based electrochemical biosensor was fabricated for the highly sensitive detection of breast cancer tumor marker miRNA-4484. Firstly, few-layer WS2 nanosheets were prepared by shear stripping and characterized by SEM, TEM, AFM and UV spectrophotometer. After modification of few-layer WS2 nanosheets on the electrode surface, the miRNA probe was fixed on the few-layer WS2 nanosheets by polycytosine (PolyC). Then short-chain miRNA containing PolyC was used as the blocking agent to close the excess active sites on the surface of WS2 nanosheets to complete the fabrication of the sensor biosensing interface. Finally, the current changes caused by the specific binding of miRNA-4484 to the probe were analyzed by differential pulse voltammetry (DPV). The results showed that the sensor had a good linear relationship for the detection of miRNA-4484 in the concentration range of 1 aM-100 fM, and the detection limit was as low as 1.61 aM. In addition, the electrochemical sensor had excellent selectivity, stability and reproducibility. The artificial sample tests indicated that the developed biosensors have the potential for clinical application in the future.
Collapse
Affiliation(s)
- Dujuan Li
- Ministry of Education Engineering Research Center of Smart Microsensors and Microsystems, Hangzhou Dianzi University, Hangzhou, 310018, China; School of Electronics and Information, Hangzhou Dianzi University, Hangzhou, 310018, China.
| | - Huyue Wei
- Ministry of Education Engineering Research Center of Smart Microsensors and Microsystems, Hangzhou Dianzi University, Hangzhou, 310018, China; School of Electronics and Information, Hangzhou Dianzi University, Hangzhou, 310018, China
| | - Rui Hong
- School of Automation, Hangzhou Dianzi University, Hangzhou, 310018, China
| | - Xiaojie Yue
- The Children's Hospital of Zhejiang University School of Medicine, Hangzhou, 310052, China
| | - Linxi Dong
- Ministry of Education Engineering Research Center of Smart Microsensors and Microsystems, Hangzhou Dianzi University, Hangzhou, 310018, China.
| | - Kai Fan
- School of Automation, Hangzhou Dianzi University, Hangzhou, 310018, China
| | - Jing Yu
- Zhejiang Key Laboratory of Ecological and Environmental Big Data, Hangzhou, 321001, China
| | - Defei Yao
- Zhejiang Key Laboratory of Ecological and Environmental Big Data, Hangzhou, 321001, China
| | - Hong Xu
- Guangdong Technology Research Center for Marine Algal Bioengineering, College of Life Sciences and Oceanography, Shenzhen University, Shenzhen, 518060, China
| | - Jun Lu
- Auckland Bioengineering Institute, University of Auckland, Auckland, 1142, New Zealand
| | - Gaofeng Wang
- Ministry of Education Engineering Research Center of Smart Microsensors and Microsystems, Hangzhou Dianzi University, Hangzhou, 310018, China; School of Electronics and Information, Hangzhou Dianzi University, Hangzhou, 310018, China.
| |
Collapse
|
3
|
Mahmoudi-Maleki R, Majidi MR, Sohrabi H, Mahmoudi E, Fooladvand H, Coruh A, Niaei A. Exploring the potential of SrTi 0.7Fe 0.3O 3 perovskite/Chitosan nanosheets for the development of a label-free electrochemical sensing assay for determination of naproxen in human plasma samples. Anal Biochem 2024; 690:115513. [PMID: 38531530 DOI: 10.1016/j.ab.2024.115513] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2023] [Revised: 03/09/2024] [Accepted: 03/21/2024] [Indexed: 03/28/2024]
Abstract
Naproxen is a nonsteroidal anti-inflammatory drug used to treat nonrheumatic inflammation, migraine, and gout. Therefore, the determination of naproxen in pharmaceutical and biological samples is of particular importance. In the present work, SrTi0.7Fe0.3O3 perovskite/Chitosan nanosheets were used to modify the surface of a glassy carbon electrode (GCE) for highly sensitive determination of naproxen. To ensure the successful synthesis of the perovskite nanosheets, morphological studies including scanning electron microscopy (SEM), Energy-dispersive X-ray (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) were carried out. The electrochemical investigations of naproxen on the modified surface of GCE were investigated and the limit of detection (LOD) and limit of quantification (LOQ) were acquired 0.50 and 1.67 μM, respectively. Additionally, the linear range (LR) of 1.99-130.84 μM was obtained for the oxidation of naproxen. The obtained results have been proved that the mentioned method is simple, sensitive, and specific with a short analysis time. The dominant analytical features of the designed sensor are possessing a low detection limit, excellent stability, repeatability, and high selectivity in the presence of naproxen. For investigation of the applicability of the designed assay in real sample analysis, human plasma samples have been examined and a recovery index was acquired 95%.
Collapse
Affiliation(s)
| | - Mir Reza Majidi
- Department of Analytical Chemistry, University of Tabriz, Tabriz, 51666 16471, Iran.
| | - Hessamaddin Sohrabi
- Department of Analytical Chemistry, University of Tabriz, Tabriz, 51666 16471, Iran.
| | - Elham Mahmoudi
- Catalyst and Reactor Research Lab., Department of Chemical & Petroleum Engineering, University of Tabriz, Tabriz, Iran
| | - Homa Fooladvand
- Department of Analytical Chemistry, University of Tabriz, Tabriz, 51666 16471, Iran
| | - Ali Coruh
- Department of Physics, Sakarya University, Sakarya, Turkey
| | - Aligholi Niaei
- Catalyst and Reactor Research Lab., Department of Chemical & Petroleum Engineering, University of Tabriz, Tabriz, Iran; Department of Physics, Sakarya University, Sakarya, Turkey
| |
Collapse
|
4
|
Gunasekaran BM, Srinivasan S, Ezhilan M, Nesakumar N. Nucleic acid-based electrochemical biosensors. Clin Chim Acta 2024; 559:119715. [PMID: 38735514 DOI: 10.1016/j.cca.2024.119715] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2024] [Revised: 05/01/2024] [Accepted: 05/01/2024] [Indexed: 05/14/2024]
Abstract
Colorectal cancer, breast cancer, oxidative DNA damage, and viral infections are all significant and major health threats to human health, presenting substantial challenges in early diagnosis. In this regard, a wide range of nucleic acid-based electrochemical platforms have been widely employed as point-of-care diagnostics in health care and biosensing technologies. This review focuses on biosensor design strategies, underlying principles involved in the development of advanced electrochemical genosensing devices, approaches for immobilizing DNA on electrode surfaces, as well as their utility in early disease diagnosis, with a particular emphasis on cancer, leukaemia, oxidative DNA damage, and viral pathogen detection. Notably, the role of biorecognition elements and nanointerfaces employed in the design and development of advanced electrochemical genosensors for recognizing biomarkers related to colorectal cancer, breast cancer, leukaemia, oxidative DNA damage, and viral pathogens has been extensively reviewed. Finally, challenges associated with the fabrication of nucleic acid-based biosensors to achieve high sensitivity, selectivity, a wide detection range, and a low detection limit have been addressed. We believe that this review will provide valuable information for scientists and bioengineers interested in gaining a deeper understanding of the fabrication and functionality of nucleic acid-based electrochemical biosensors for biomedical diagnostic applications.
Collapse
Affiliation(s)
- Balu Mahendran Gunasekaran
- School of Chemical & Biotechnology (SCBT), SASTRA Deemed University, Thanjavur 613 401, Tamil Nadu, India; Center for Nanotechnology & Advanced Biomaterials (CENTAB), SASTRA Deemed University, Thanjavur 613401, Tamil Nadu, India
| | - Soorya Srinivasan
- Department of Chemistry, A.V.V.M Sri Pushpam College (Autonomous), (Affiliated to Bharathidasan University, Tiruchirappalli), Poondi, Thanjavur, Tamil Nadu 613 503, India
| | - Madeshwari Ezhilan
- Department of biomedical engineering, Vel Tech Rangarajan Dr. Sagunthala R & D Institute of Science and Technology, Vel Nagar, Avadi, Chennai 600062, Tamil Nadu, India
| | - Noel Nesakumar
- School of Chemical & Biotechnology (SCBT), SASTRA Deemed University, Thanjavur 613 401, Tamil Nadu, India; Center for Nanotechnology & Advanced Biomaterials (CENTAB), SASTRA Deemed University, Thanjavur 613401, Tamil Nadu, India.
| |
Collapse
|
5
|
Mokni M, Tlili A, Khalij Y, Attia G, Zerrouki C, Hmida W, Othmane A, Bouslama A, Omezzine A, Fourati N. Designing a Simple Electrochemical Genosensor for the Detection of Urinary PCA3, a Prostate Cancer Biomarker. MICROMACHINES 2024; 15:602. [PMID: 38793175 PMCID: PMC11123437 DOI: 10.3390/mi15050602] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2024] [Revised: 04/25/2024] [Accepted: 04/26/2024] [Indexed: 05/26/2024]
Abstract
This study investigates the feasibility of a simple electrochemical detection of Prostate Cancer Antigen 3 (PCA3) fragments extracted from patients' urine, using a thiolated single-strand DNA probe immobilized on a gold surface without using a redox probe. To enhance the PCA3 recognition process, we conducted a comparative analysis of the hybridization location using two thiolated DNA probes: Probe 1 targets the first 40 bases, while Probe 2 targets the fragment from bases 47 to 86. Hybridization with PCA3 followed, using square wave voltammetry. The limit of detection of the designed genosenors were of the order of (2.2 ng/mL), and (1.6 ng/mL) for Probes 1 and 2, respectively, and the subsequent sensitivities were of the order of (0.09 ± 0.01) µA-1 · µg-1 · mL and (0.10 ± 0.01) µA-1 · µg-1 · mL. Specificity tests were then conducted with the sensor functionalized with Probe 2, as it presents better analytical performances. The electrochemical results indicate that the designed sensor can clearly discriminate a complementary target from a non-complementary one. A further modeling of the calibration curves with the Power Law/Hill model indicates that the dissociation constant increases by one order of magnitude, confirming the ability of the designed sensor to perfectly discriminate complementary targets from non-complementary ones.
Collapse
Affiliation(s)
- Meriem Mokni
- SATIE Laboratory, UMR CNRS 8029, Cnam, 292 rue Saint Martin, 75003 Paris, France; (M.M.); (A.T.); (G.A.); (C.Z.)
- Biochemistry Department, LR12SP11, Sahloul University Hospital, Route Ceinture Sahloul, Sousse 4054, Tunisia; (Y.K.); (A.B.); (A.O.)
| | - Amal Tlili
- SATIE Laboratory, UMR CNRS 8029, Cnam, 292 rue Saint Martin, 75003 Paris, France; (M.M.); (A.T.); (G.A.); (C.Z.)
- LIMA Laboratory, Faculty of Medicine of Monastir, University of Monastir, Avenue Avicenne, Monastir 5019, Tunisia;
| | - Yassine Khalij
- Biochemistry Department, LR12SP11, Sahloul University Hospital, Route Ceinture Sahloul, Sousse 4054, Tunisia; (Y.K.); (A.B.); (A.O.)
| | - Ghada Attia
- SATIE Laboratory, UMR CNRS 8029, Cnam, 292 rue Saint Martin, 75003 Paris, France; (M.M.); (A.T.); (G.A.); (C.Z.)
| | - Chouki Zerrouki
- SATIE Laboratory, UMR CNRS 8029, Cnam, 292 rue Saint Martin, 75003 Paris, France; (M.M.); (A.T.); (G.A.); (C.Z.)
| | - Wissem Hmida
- Sahloul University Hospital, Urology Department, Street Route Ceinture Sahloul, Sousse 4054, Tunisia;
| | - Ali Othmane
- LIMA Laboratory, Faculty of Medicine of Monastir, University of Monastir, Avenue Avicenne, Monastir 5019, Tunisia;
| | - Ali Bouslama
- Biochemistry Department, LR12SP11, Sahloul University Hospital, Route Ceinture Sahloul, Sousse 4054, Tunisia; (Y.K.); (A.B.); (A.O.)
- Faculty of Pharmacy of Monastir, University of Monastir, Avenue Ibn Sina, Monastir 5000, Tunisia
| | - Asma Omezzine
- Biochemistry Department, LR12SP11, Sahloul University Hospital, Route Ceinture Sahloul, Sousse 4054, Tunisia; (Y.K.); (A.B.); (A.O.)
- Faculty of Pharmacy of Monastir, University of Monastir, Avenue Ibn Sina, Monastir 5000, Tunisia
| | - Najla Fourati
- SATIE Laboratory, UMR CNRS 8029, Cnam, 292 rue Saint Martin, 75003 Paris, France; (M.M.); (A.T.); (G.A.); (C.Z.)
| |
Collapse
|
6
|
Mahmoudi E, Asghari E, Delibaş N, Niaei A. Application of response surface methodology for optimization of the test condition of oxygen evolution reaction over La 0.8Ba 0.2CoO 3 perovskite-active carbon composite. Sci Rep 2023; 13:22878. [PMID: 38129452 PMCID: PMC10739840 DOI: 10.1038/s41598-023-49836-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/25/2023] [Accepted: 12/12/2023] [Indexed: 12/23/2023] Open
Abstract
The Experimental Design was applied to optimize the electrocatalytic activity of La0.8Ba0.2CoO3 perovskite oxide/Active Carbon composite material in the alkaline solution for the Oxygen Evolution Reaction. After the preparation of La0.8Ba0.2CoO3, and structural characterizations, the experimental design was utilized to determine the optimal amount of the composite material and testing conditions. The overpotential was defined as the response variable, and the mass ratio of perovskite/active carbon, Potassium hydroxide (KOH) concentration, and Poly(vinylidene fluoride) (PVDF) amount were considered effective parameters. The significance of model terms is demonstrated by P-values less than 0.0500. The proposed prediction model determined the optimal amounts of 0.665 mg of PVDF, a KOH concentration of 0.609 M, and A perovskite/Active Carbon mass ratio of 2.81 with 308.22 mV overpotential (2.27% greater than the actual overpotential). The stability test of the optimized electrode material over 24 h suggests that it could be a good candidate electrocatalyst for OER with reusability potential.
Collapse
Affiliation(s)
- Elham Mahmoudi
- Department of Chemical and Petroleum Engineering, University of Tabriz, Tabriz, 5166616471, Iran
| | - Elnaz Asghari
- Department of Physical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran
| | - Nagihan Delibaş
- Department of Physics, Faculty of Art and Science, Sakarya University, Sakarya, Turkey
| | - Aligholi Niaei
- Department of Chemical and Petroleum Engineering, University of Tabriz, Tabriz, 5166616471, Iran.
- Department of Physics, Faculty of Art and Science, Sakarya University, Sakarya, Turkey.
| |
Collapse
|
7
|
Fu L, Zheng Y, Li X, Liu X, Lin CT, Karimi-Maleh H. Strategies and Applications of Graphene and Its Derivatives-Based Electrochemical Sensors in Cancer Diagnosis. Molecules 2023; 28:6719. [PMID: 37764496 PMCID: PMC10536827 DOI: 10.3390/molecules28186719] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2023] [Revised: 09/14/2023] [Accepted: 09/18/2023] [Indexed: 09/29/2023] Open
Abstract
Graphene is an emerging nanomaterial increasingly being used in electrochemical biosensing applications owing to its high surface area, excellent conductivity, ease of functionalization, and superior electrocatalytic properties compared to other carbon-based electrodes and nanomaterials, enabling faster electron transfer kinetics and higher sensitivity. Graphene electrochemical biosensors may have the potential to enable the rapid, sensitive, and low-cost detection of cancer biomarkers. This paper reviews early-stage research and proof-of-concept studies on the development of graphene electrochemical biosensors for potential future cancer diagnostic applications. Various graphene synthesis methods are outlined along with common functionalization approaches using polymers, biomolecules, nanomaterials, and synthetic chemistry to facilitate the immobilization of recognition elements and improve performance. Major sensor configurations including graphene field-effect transistors, graphene modified electrodes and nanocomposites, and 3D graphene networks are highlighted along with their principles of operation, advantages, and biosensing capabilities. Strategies for the immobilization of biorecognition elements like antibodies, aptamers, peptides, and DNA/RNA probes onto graphene platforms to impart target specificity are summarized. The use of nanomaterial labels, hybrid nanocomposites with graphene, and chemical modification for signal enhancement are also discussed. Examples are provided to illustrate applications for the sensitive electrochemical detection of a broad range of cancer biomarkers including proteins, circulating tumor cells, DNA mutations, non-coding RNAs like miRNA, metabolites, and glycoproteins. Current challenges and future opportunities are elucidated to guide ongoing efforts towards transitioning graphene biosensors from promising research lab tools into mainstream clinical practice. Continued research addressing issues with reproducibility, stability, selectivity, integration, clinical validation, and regulatory approval could enable wider adoption. Overall, graphene electrochemical biosensors present powerful and versatile platforms for cancer diagnosis at the point of care.
Collapse
Affiliation(s)
- Li Fu
- Key Laboratory of Novel Materials for Sensor of Zhejiang Province, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018, China;
| | - Yuhong Zheng
- Jiangsu Key Laboratory for the Research and Utilization of Plant Resources, Institute of Botany, Jiangsu Province & Chinese Academy of Sciences (Nanjing Botanical Garden Mem. Sun Yat-Sen), Nanjing 210014, China
| | - Xingxing Li
- Key Laboratory of Novel Materials for Sensor of Zhejiang Province, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018, China;
| | - Xiaozhu Liu
- Department of Critical Care Medicine, Beijing Shijitan Hospital, Capital Medical University, Beijing 100054, China;
| | - Cheng-Te Lin
- Qianwan Institute, Ningbo Institute of Materials Technology and Engineering (NIMTE), Chinese Academy of Sciences, Ningbo 315201, China;
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering (NIMTE), Chinese Academy of Sciences, Ningbo 315201, China
| | - Hassan Karimi-Maleh
- School of Resources and Environment, University of Electronic Science and Technology of China, Chengdu 611731, China;
- School of Engineering, Lebanese American University, Byblos 1102-2801, Lebanon
| |
Collapse
|