Review of Electroanalytical-Based Approaches for the Determination of Benzodiazepines

Electrochemical classification of benzodiazepines: A comprehensive approach combining insights from voltammetry and liquid chromatography - mass spectrometry

The growing non-medical use of benzodiazepines (BZs) has led to the emergence of counterfeit BZ pills and new psycho-active substances (NPS) in the BZ class on the illicit market. Comprehensive analytical methods for BZ identification are required to allow law enforcement, first aid responders and drug-checking services to analyze a variety of sample types and contents to make timely decisions on the spot. In this work, the electrochemical behavior of diazepam (DZ), clonazepam (CZ) and alprazolam (AP) is studied on graphite screen-printed electrodes, both with and without dissolved oxygen in the solution, to link their redox signals to their chemical structure. After elucidation of their reduction mechanisms using liquid chromatography coupled to high-resolution mass spectrometry, three structural classes (Class 1, Class 2 and Class 3) were defined, each with different redox centers and electrochemical behavior. Subsequently, 22 confiscated pills containing 14 different BZs were correctly assigned to these three structural classes, with the deoxygenated conditions displaying the highest class selectivity. Finally, the three classes were successfully detected after being spiked into five alcoholic beverages in the context of drug-facilitated sexual assault. For analysis in red wine, which complicated the analysis by interfering with Class 1, a dual test strategy in pH 2 and pH 7 was proposed for accurate detection. Its rapid measurements, broad scope and lack of interference from diluents or colors makes this method a promising approach for aiding various services in combating problematic BZ use.

Eco-friendly electrochemical sensor for determination of conscious sedating drug "midazolam'' based on Au-NPs@Silica modified carbon paste electrode

Benzodiazepines (BZDs) are a group of drugs prescribed for their sedating effect. Their misuse and addictive properties stipulate different authorities for developing simple, fast and accurate analytical methods for instantaneous detection. Differential pulse voltammetric technique (DPV) was utilized for the selective assay of midazolam hydrochloride (MDZ) in the pure, parenteral dosage forms and plasma samples. A chemically modified carbon paste electrode (CPE) was implemented during the study. The method depended on the electroreduction of MDZ on the surface of the electrode over a potential range of 0.0 V to -1.6 V. The electrode was fabricated using silica nanoparticles (Si-NPs) which were incorporated into the composition of the CPE and used to enhance the electrode performance. Then, to enhance the sensitivity of the method, a chronoamperometric modification step was applied for depositing gold nanoparticles (Au-NPs) on the carbon paste electrode surface. Modification with Au-NPs showed a higher reduction current peak for MDZ with well-defined peaks. Various parameters such as pH of the media and measurements scan rate were investigated and optimized to enhance the sensor sensitivity. The sensor showed a dynamic linear response over a concentration range of 4.0 × 10-7 M to 2.9 × 10-4 M of MDZ with a LOD of 2.24 × 10-8 M using 0.1 M acetate buffer (pH 5.6). The sensor was validated in accordance with the ICH guidelines regarding accuracy, precision and specificity for the selective assay of MDZ in the presence of excipients. A greenness evaluation was performed using three different assessment tools, namely, the "Green Analytical Procedure Index" (GAPI), the "Analytical Greenness metric" (AGREE) and the "Whiteness Analytical Chemistry tool" (WAC) using the RGB12 model.

Overview of the bioanalytical methods used for the determination of benzodiazepines in biological samples and their suitability for emergency toxicological analysis

Benzodiazepines are one of the most widely used classes of drugs around the world. They are medically used in different therapeutic areas including insomnia, anxiety, epilepsy, and anesthesia. Unfortunately, these drugs are very widespread in the illicit market for recreational purposes and cause drug dependence, traffic accidents, and criminality. Furthermore, benzodiazepine misuse leads to acute poisoning cases that often end up in hospital emergency rooms. Therefore, it is crucial for hospitals to possess straightforward and efficient bioanalytical techniques that enable the swift detection of benzodiazepines in biological samples. This review provides a general overview of the different bioanalytical techniques used for the detection and quantification of benzodiazepines in biological samples and emphasizes their suitability for emergency toxicological analyzes.

Laser-scribing fabrication of a disposable electrochemical device for forensic detection of crime facilitating drugs in beverage samples

A portable and disposable laser-scribed graphene (LSG) device was fabricated on polyetherimide (PEI) substrate for electrochemical detection of benzodiazepines (BZ) drugs such as diazepam (DZ) and midazolam (MZ) in commercial beverage samples. Morphological characterizations of the LSG material recorded by scanning electron microscopy (SEM) revealed the porous nature of the proposed electrochemical device, which contributed to the enhancement of the electroactive area. Besides, the structural and electrochemical characterizations performed by Raman spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) measurements revealed that the PEI-LSG material presents highly disordered graphene-like structures and high electron transfer features, respectively. The electrochemical detection of DZ and MZ was carried out by Square Wave Voltammetry (SWV), whose analytical curves exhibited two linear intervals in concentrations ranging from 2.5 μmol L^-1 to 25.0 μmol L^-1 and from 25.0 μmol L^-1 to 100.0 μmol L^-1 for both BZ. We obtained limits of detection (LOD) and quantification (LOQ) of 0.66 and 2.18 μmol L^-1 for DZ and 0.61 μmol L^-1 and 2.01 μmol L^-1 for MZ, respectively. The developed sensor was applied to detect DZ and MZ in commercial beverages such as juice, whisky, and sugarcane spirit samples to mimic potential forensic evidence of drug-facilitated crimes. The recoveries ranged from 97.1% to 117.2% for DZ and from 92.2% to 114.3% for MZ. In addition, the proposed method presented high manufacturing reproducibility (relative standard deviation (RSD) = 2.18% for DZ and RSD = 3.82% for MZ, n = 8 sensors) and adequate selectivity, highlighting the potential of PEI-LSG sensor as an excellent alternative method for forensic detection of crime facilitating drugs in commercial beverage samples.

Recent Advances in the Development of Portable Electrochemical Sensors for Controlled Substances

This review article summarizes recent achievements in developing portable electrochemical sensing systems for the detection and/or quantification of controlled substances with potential on-site applications at the crime scene or other venues and in wastewater-based epidemiology. Electrochemical sensors employing carbon screen-printed electrodes (SPEs), including a wearable glove-based one, and aptamer-based devices, including a miniaturized aptamer-based graphene field effect transistor platform, are some exciting examples. Quite straightforward electrochemical sensing systems and methods for controlled substances have been developed using commercially available carbon SPEs and commercially available miniaturized potentiostats. They offer simplicity, ready availability, and affordability. With further development, they might become ready for deployment in forensic field investigation, especially when fast and informed decisions are to be made. Slightly modified carbon SPEs or SPE-like devices might be able to offer higher specificity and sensitivity while they can still be used on commercially available miniaturized potentiostats or lab-fabricated portable or even wearable devices. Affinity-based portable devices employing aptamers, antibodies, and molecularly imprinted polymers have been developed for more specific and sensitive detection and quantification. With further development of both hardware and software, the future of electrochemical sensors for controlled substances is bright.

Alprazolam Detection Using an Electrochemical Nanobiosensor Based on AuNUs/Fe-Ni@rGO Nanocomposite

Despite all the psychological advantages of alprazolam, its long list of toxic properties and interactions has caused concern and highlighted the need for a reliable sensing method. In this study, we developed a simple, highly sensitive electrochemical nanobiosensor to determine the desirable dose of alprazolam, averting the undesirable consequences of overdose. Gold nanourchins (AuNUs) and iron-nickel reduced graphene oxide (Fe-Ni@rGO) were immobilized on a glassy carbon electrode, which was treated beforehand. The electrode surface was characterized using cyclic voltammetry, Fourier transform infrared spectroscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy, and differential pulse voltammetry. The fabricated sensor showed two linear ranges (4 to 500 µg L^-1 and 1 to 50 mg L^-1), low limit of detection (1 µg L^-1), high sensitivity, good repeatability, and good recovery. Increased -OH and carboxyl (-COOH) groups on the electrode surface, resulting in improved the adsorption of alprazolam and thus lower limit of detection. This nanobiosensor could detect alprazolam powder dissolved in diluted blood serum; we also studied other benzodiazepine drugs (clonazepam, oxazepam, and diazepam) with this nanobiosensor, and results were sensible, with a significant difference.

Adsorptive Cathodic Stripping Voltammetry for Quantification of Alprazolam

A simple and highly sensitive electrochemical sensor was developed for adsorptive cathodic stripping voltammetry of alprazolam. Based on an electrochemically pretreated glassy carbon electrode, the sensor demonstrated good adsorption and electrochemical reduction of alprazolam. The morphology of the glassy carbon electrode and the electrochemically pretreated glassy carbon electrode were characterized by scanning electron microscopy/energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The electrochemical behaviors of alprazolam were determined by cyclic voltammetry, and the analytical measurements were studied by adsorptive cathodic stripping voltammetry. Optimized operational conditions included the concentration and deposition time of sulfuric acid in the electrochemical pretreatment, preconcentration potential, and preconcentration time. Under optimal conditions, the developed alprazolam sensor displayed a quantification limit of 0.1 mg L^-1, a detection limit of 0.03 mg L^-1, a sensitivity of 67 µA mg^-1 L cm^-2 and two linear ranges: 0.1 to 4 and 4 to 20 mg L^-1. Sensor selectivity was excellent, and repeatability (%RSD < 4.24%) and recovery (82.0 ± 0.2 to 109.0 ± 0.3%) were good. The results of determining alprazolam in beverages with the developed system were in good agreement with results from the gas chromatography-mass spectrometric method.

Edge plane pyrolytic graphite as a sensing surface for the determination of fluvoxamine in urine samples of obsessive-compulsive disorder patients

There is an increasing demand for fast and sensitive determination of antidepressants in human body fluids because of the present scenario of rising depression cases at the global level. A simple and sensitive voltammetric method using edge plane pyrolytic graphite electrode (EPPGE) as a novel sensor is presented for the determination of antidepressant fluvoxamine in urine and blood plasma samples of obsessive-compulsive disorder (OCD) patients. EPPGE is delineated the first time for this determination. EPPGE exhibited strong electrocatalytic activity and enhanced reduction signal towards the sensing of fluvoxamine. Fluvoxamine gave a well-defined reduction peak at ~ - 670 mV using EPPGE. The fluvoxamine reduction peak current was linear to its concentration in the range 5.00 × 10^-9 - 0.1 × 10^-6 mol L^-1 and the limit of detection was found to be 3.5 × 10^-9 mol L^-1. The pre-eminence of EPPGE over mercury electrodes has been proved in terms of sensitivity and imperative analytical parameters. The pH study reveals the involvement of an equal number of electrons and protons in the reduction reaction mechanism. The frequency study indicated the adsorption controlled irreversible reaction mechanism. The stability and reproducibility of the offered sensor were also found most favorable. The interference study confirmed the optimum selectivity of the proposed sensor. The edge plane pyrolytic graphite sensing platform is recommended as a potential contender for the accurate and fast determination of fluvoxamine in depression medications as well as biological specimens of OCD patients.

Feasibility of on/at Line Methods to Determine Boar Taint and Boar Taint Compounds: An Overview

Simple Summary

Due to welfare issues, the physical castration of male pigs is decreasing, and the entire male pig production is increasing. Fattening entire male pigs requires control due to the possibility of accumulating off odour/flavour called boar taint, which is mainly due to two compounds - skatole and androstenone. If carcasses with boar taint reach the market, it can cause a negative consumer reaction which may have economic consequences for the whole meat chain. Thus, it is necessary to sort out carcasses at the slaughter line. Today, a sensory quality control (human nose method) is used in some slaughter plants for this purpose. Detection by physical or chemical methods is also envisaged. A colorimetric method to determine skatole has been used in Danish abattoirs for decades, but it is foreseen that it will soon be replaced by the laser diode thermal desorption ion source coupled with a mass spectrometry equipment that allows a fully automated classification based on skatole and androstenone levels at speed line, with a delay of less than 40 min. Other potential methods such as the electrochemical biosensors, rapid evaporative ionization mass spectroscopy and Raman spectroscopy, still need further development and validation for an application at abattoir level.

Abstract

Classification of carcasses at the slaughter line allows an optimisation of its processing and differentiated payment to producers. Boar taint is a quality characteristic that is evaluated in some slaughter plants. This odour and flavour is mostly present in entire males and perceived generally by sensitive consumers as unpleasant. In the present work, the methodologies currently used in slaughter plants for boar taint classification (colorimetric method and sensory quality control-human nose) and the methodologies that have the potential to be implemented on/at the slaughter line (mass spectrometry, Raman and biosensors) have been summarized. Their main characteristics are presented and an analysis of strengths, weaknesses, opportunities and threats (SWOT) has been carried out. From this, we can conclude that, apart from human nose, the technology that arises as very promising and available on the market, and that will probably become a substitute for the colorimetric method, is the tandem between the laser diode thermal desorption ion source and the mass spectrometry (LDTD-MS/MS) with automation of the sampling and sample pre-treatment, because it is able to work at the slaughter line, is fast and robust, and measures both androstenone and skatole.

Rapid Drop-Volume Electrochemical Detection of the "Date Rape" Drug Flunitrazepam in Spirits Using a Screen-Printed Sensor in a Dry-Reagent Format

Flunitrazepam is an extremely potent benzodiazepine sedative which is associated with "drug-facilitated sexual assault" when administered within an alcoholic drink. This work describes a simple electrochemical method for on-site rapid detection of flunitrazepam in untreated spirits (whiskey, vodka and gin) using a single-use screen-printed sensor (featuring graphite working and auxiliary electrodes and an Ag/AgCl reference electrode) in a dry reagent format. Analysis was performed by placing a drop of sample on the sensor, which was previously coated with dry KCl, and recording selected reduction/oxidation peaks of the target compound in a cyclic voltammetry scan. The limit of quantification of flunitrazepam was at the sub-mg L^-1 range. The between-sensor % relative standard deviation of the analytically useful reduction peak in a solution containing 11.4 mg L^-1 flunitrazepam was 9.8% (n = 5). Quantification was performed using calibration curves constructed from pooled samples spiked with flunitrazepam with relative errors <15%. The main advantages of the methodology are that it involves no sample pretreatment (such as deoxygenation, extraction or reagent(s) addition) and requires only drop-sized volumes of the sample, thus facilitating rapid on-site screening using portable equipment.