Structural Disorder of Mechanically Activated δ-MgCl2 Studied by Synchrotron X-ray Total Scattering and Vibrational Spectroscopy

Sulfonated porous organic polymer supported Ziegler-Natta catalysts for the synthesis of ultra-high molecular weight polyethylene

Porous organic polymers (POPs) are attracting attention for their easy functionalization and potential as catalyst supports in olefin polymerization. In this study, sulfonated POP (s-POP) supported Ziegler-Natta catalysts were used for ethylene polymerization, producing ultra-high molecular weight polyethylene, with M ν reaching up to 6.83 × 106 g mol-1. The maximum M ν of polyethylene was achieved by Cat-3 with DIBP as the internal donor, albeit with a partial loss of catalytic activity. Polymerization conditions also play a pivotal role in determining the molecular weight of polyethylene. Hydrogen, being the most efficient chain transfer agent, can decrease the molecular weight to 9.68 × 104 g mol-1 at higher hydrogen concentrations ([H2] : [C2H4] = 0.83), and the s-POP-supported ethylene polymerization catalysts were observed to exhibit high sensitivity to hydrogen response. The effects of polymerization temperature, [Al] : [Ti] molar ratio, and ethylene pressure on ethylene polymerization were thoroughly investigated.

Influence of the Ethanol Content of Adduct on the Comonomer Incorporation of Related Ziegler-Natta Catalysts in Propylene (Co)polymerizations

The aim of this work is to investigate the influence of the ethanol content of adducts on the catalytic behavior of related Ziegler-Natta (ZN) catalysts in propylene homo- and copolymerizations (with 1-hexene comonomer) in terms of activity, isotacticity, H2 response, and comonomer incorporation. For this purpose, three MgCl2.nEtOH adducts with n values of 0.7, 1.2, and 2.8 were synthesized and used in the synthesis of related ZN catalysts. The catalysts were thoroughly characterized using XRD, BET, SEM, EDX, N2 adsorption-desorption, and DFT techniques. Additionally, the microstructure of the synthesized (co)polymers was distinguished via DSC, SSA, and TREF techniques. Their activity was found to enhance with the adduct's ethanol content in both homo- and copolymerization experiments, and the increase was more pronounced in homopolymerization reactions in the absence of H2. Furthermore, the catalyst with the highest ethanol content provided a copolymer with a lower isotacticity index, a shorter meso sequence length, and a more uniform distribution of comonomer within the chains. These results were attributed to the higher total surface area and Ti content of the corresponding catalyst, as well as its lower average pore diameter, a larger proportion of large pores compared to the other two catalysts, and its spherical open bud morphology. It affirms the importance of catalyst/support ethanol-content control during the preparation process. Then, molecular simulation was employed to shed light on the iso-specificity of the polypropylene produced via synthesized catalysts.

Bottom-Up Synthesis of Multi-Grained Ziegler–Natta Catalyst Based on MgO/MgCl2/TiCl4 Core–Shell Catalyst

Morphology control plays a major role in the design of solid catalysts. Since the heterogeneous Ziegler–Natta catalyst (ZNC) is based on the in situ synthesis of MgCl2 support in a top-down manner, the individual control of the exterior and the interior structure of the catalyst macro-particles is challenging. In this study, we successfully prepared a ZNC with a multi-grain interior structure by the spray-drying of MgO nanoparticles, inspired by the fact that the MgO/MgCl2/TiCl4 core–shell catalyst can maintain the morphology of the raw MgO nanoparticles. This catalyst is the first example of the bottom-up preparation of MgCl2-supported ZNC. Here, we report its basic preparation method, characterization results, and performance in the homo-polymerization of ethylene and propylene, and copolymerization with 1-hexene.