1
|
Algethami JS, Hassan MS, Amna T, Alqarni LS, Alhamami MAM, Seliem AF. Bismuth Vanadate Decked Polyaniline Polymeric Nanocomposites: The Robust Photocatalytic Destruction of Microbial and Chemical Toxicants. MATERIALS (BASEL, SWITZERLAND) 2023; 16:ma16093314. [PMID: 37176198 PMCID: PMC10179250 DOI: 10.3390/ma16093314] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Revised: 04/16/2023] [Accepted: 04/20/2023] [Indexed: 05/15/2023]
Abstract
Functional materials have long been studied for a variety of environmental applications, resource rescue, and many other conceivable applications. The present study reports on the synthesis of bismuth vanadate (BiVO4) integrated polyaniline (PANI) using the hydrothermal method. The topology of BiVO4 decked PANI catalysts was investigated by SEM and TEM. XRD, EDX, FT-IR, and antibacterial testing were used to examine the physicochemical and antibacterial properties of the samples, respectively. Microscopic images revealed that BiVO4@PANI are comprised of BiVO4 hollow cages made up of nanobeads that are uniformly dispersed across PANI tubes. The PL results confirm that the composite has the lowest electron-hole recombination compared to others samples. BiVO4@PANI composite photocatalysts demonstrated the maximum degradation efficiency compared to pure BiVO4 and PANI for rhodamine B dye. The probable antimicrobial and photocatalytic mechanisms of the BiVO4@PANI photocatalyst were proposed. The enhanced antibacterial and photocatalytic activity could be attributed to the high surface area and combined impact of PANI and BiVO4, which promoted the migration efficiency of photo-generated electron holes. These findings open up ways for the potential use of BiVO4@PANI in industries, environmental remediation, pharmaceutical and medical sectors. Nevertheless, biocompatibility for human tissues should be thoroughly examined to lead to future improvements in photocatalytic performance and increase antibacterial efficacy.
Collapse
Affiliation(s)
- Jari S Algethami
- Department of Chemistry, College of Science and Arts, Najran University, Najran 11001, Saudi Arabia
- Promising Centre for Sensors and Electronic Devices (PCSED), Advanced Materials and Nano-Research Centre, Najran University, Najran 11001, Saudi Arabia
| | - M Shamshi Hassan
- Department of Chemistry, College of Science, Albaha University, Albaha 65799, Saudi Arabia
| | - Touseef Amna
- Department of Biology, College of Science, Albaha University, Albaha 65799, Saudi Arabia
| | - Laila S Alqarni
- Chemistry Department, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11564, Saudi Arabia
| | - Mohsen A M Alhamami
- Department of Chemistry, College of Science and Arts, Najran University, Najran 11001, Saudi Arabia
| | - Amal F Seliem
- Department of Chemistry, College of Science and Arts, Najran University, Najran 11001, Saudi Arabia
| |
Collapse
|
2
|
Gupta V, Yadav RK, Umar A, Ibrahim AA, Singh S, Shahin R, Shukla RK, Tiwary D, Dwivedi DK, Singh AK, Singh AK, Baskoutas S. Highly Efficient Self-Assembled Activated Carbon Cloth-Templated Photocatalyst for NADH Regeneration and Photocatalytic Reduction of 4-Nitro Benzyl Alcohol. Catalysts 2023. [DOI: 10.3390/catal13040666] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/31/2023] Open
Abstract
This manuscript emphasizes how structural assembling can facilitate the generation of solar chemicals and the synthesis of fine chemicals under solar light, which is a challenging task via a photocatalytic pathway. Solar energy utilization for pollution prevention through the reduction of organic chemicals is one of the most challenging tasks. In this field, a metal-based photocatalyst is an optional technique but has some drawbacks, such as low efficiency, a toxic nature, poor yield of photocatalytic products, and it is expensive. A metal-free activated carbon cloth (ACC)–templated photocatalyst is an alternative path to minimize these drawbacks. Herein, we design the synthesis and development of a metal-free self-assembled eriochrome cyanine R (EC-R) based ACC photocatalyst (EC-R@ACC), which has a higher molar extinction coefficient and an appropriate optical band gap in the visible region. The EC-R@ACC photocatalyst functions in a highly effective manner for the photocatalytic reduction of 4-nitro benzyl alcohol (4-NBA) into 4-amino benzyl alcohol (4-ABA) with a yield of 96% in 12 h. The synthesized EC-R@ACC photocatalyst also regenerates reduced forms of nicotinamide adenine dinucleotide (NADH) cofactor with a yield of 76.9% in 2 h. The calculated turnover number (TON) of the EC-R@ACC photocatalyst for the reduction of 4-nitrobenzyl alcohol is 1.769 × 1019 molecules. The present research sets a new benchmark example in the area of organic transformation and artificial photocatalysis.
Collapse
|
3
|
Tavakoli-Azar T, Reza Mahjoub A, Seyed Sadjadi M, Ghaznavi-Ghoushchi M. Synergistic Effect of Band gap and Surface area on the Improvement of NiTiO3sunlight-driven Photocatalysts via NiTiO3@S Nanocomposites. INORG CHEM COMMUN 2023. [DOI: 10.1016/j.inoche.2023.110658] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/01/2023]
|
4
|
Abdullah M, Iqbal J, Ur Rehman MS, Khalid U, Mateen F, Arshad SN, Al-Sehemi AG, Algarni H, Al-Hartomy OA, Fazal T. Removal of ceftriaxone sodium antibiotic from pharmaceutical wastewater using an activated carbon based TiO 2 composite: Adsorption and photocatalytic degradation evaluation. CHEMOSPHERE 2023; 317:137834. [PMID: 36640968 DOI: 10.1016/j.chemosphere.2023.137834] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/23/2022] [Revised: 12/13/2022] [Accepted: 01/10/2023] [Indexed: 06/17/2023]
Abstract
The water pollution becomes a serious concern for the sustainability of ecosystems due to the existence of pharmaceutical products (ceftriaxone (CEF) antibiotic). Even in low concentration of CEF has lethal effects on ecosystem and human health. To remove CEF, TiO2 is considered as an effective and efficient nanoparticles, however its performance is reduced due to wider energy gap and rapid recombination of charge carriers. In this study, activated carbon based TiO2 (ACT-X) heterogeneous nanocomposites were synthesized to improve the intrinsic properties of TiO2 and their adsorption-photocatalytic performance for the removal of CEF. The characterization results revealed that ACT-X composites have slower recombination of charge carriers, lower energy band gap (3.05 eV), and better light absorption under visible region of light. From ACT-X composites, the ACT-4 photocatalyst has achieved highest photocatalytic degradation (99.6%) and COD removal up (99.2%). The results of radical scavengers showed that photocatalytic degradation of CEF is mainly occurred due to superoxide and hydroxyl radicals. Meanwhile, the reusability of ACT-4 up to five cycles shows more than 80% photocatalytic degradation, which make the process more economical. The highest experimental adsorption capacity is achieved up to 844.8 mg g-1 using ACT-4. The favorable and multilayer heterogeneous adsorption is carried out according to the well-fitted data with pseudo-second-order and Freundlich models, respectively. These results indicate that the carbon-based TiO2 composites can be used as a green, stable, efficient, effective, reusable, renewable, and sustainable photocatalyst to eliminate the pharmaceutical pollutants (antibiotics) via adsorption and photocatalytic degradation processes.
Collapse
Affiliation(s)
- Muneeb Abdullah
- Institute of Chemical and Environmental Engineering (ICEE), Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, 64200, Pakistan
| | - Javed Iqbal
- Institute of Chemical and Environmental Engineering (ICEE), Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, 64200, Pakistan.
| | - Muhammad Saif Ur Rehman
- Office of Research, Innovation, and Commercialization (ORIC), Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, 64200, Pakistan
| | - Usman Khalid
- Institute of Chemical and Environmental Engineering (ICEE), Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, 64200, Pakistan
| | - Fahad Mateen
- Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, MI, 48824, USA
| | - Salman Noshear Arshad
- Department of Chemistry and Chemical Engineering, Syed Babar Ali School of Science and Engineering, Lahore University of Management Science (LUMS), Lahore, 54792, Pakistan
| | - Abdullah G Al-Sehemi
- Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha, 61413, Saudi Arabia; Department of Chemistry, College of Science, King Khalid University, Abha, 61413, Saudi Arabia
| | - Hamed Algarni
- Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha, 61413, Saudi Arabia; Department of Physics, Faculty of Science, King Khalid University, Abha 61413, Saudi Arabia
| | - Omar A Al-Hartomy
- Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah, 21589, Saudi Arabia
| | - Tahir Fazal
- Institute of Chemical and Environmental Engineering (ICEE), Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, 64200, Pakistan.
| |
Collapse
|
5
|
Malefane ME, Mafa PJ, Managa M, Nkambule TTI, Kuvarega AT. Understanding the Principles and Applications of Dual Z-Scheme Heterojunctions: How Far Can We Go? J Phys Chem Lett 2023; 14:1029-1045. [PMID: 36693167 DOI: 10.1021/acs.jpclett.2c03387] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
In the past seven years, dual Z-scheme heterojunctions evolved as favorable approaches for enhanced charge carrier separation through direct or indirect charge transfer transportation mechanisms. The dynamics of the charge transfer is the major strategy for understanding their photoactivity and stability through the formation of distinctive redox centers. The understanding of currently recognized principles for successful fabrication and classification in different energy and pollution remediation strategies is discussed, and a universal charge transfer-type-based classification of dual Z-schemes that can be adopted for Z-scheme and S-scheme heterojunctions is proposed. Methods used for determining the charge transfer as proof of dual Z-scheme existence are outlined. Most importantly, a new macroscopic N-scheme and a triple Z-scheme that can also be adopted as triple S-scheme heterostructures composed of four semiconductors are proposed for generating both oxidatively and reductively empowered systems. The proposed systems are expected to possess properties that enable them to harvest solar light to drive important chemical reactions for different applications.
Collapse
Affiliation(s)
- Mope E Malefane
- Institute for Nanotechnology and Water Sustainability, College of Science, Engineering and Technology, University of South Africa, Florida1709, Johannesburg, South Africa
| | - Potlako J Mafa
- Institute for Nanotechnology and Water Sustainability, College of Science, Engineering and Technology, University of South Africa, Florida1709, Johannesburg, South Africa
| | - Muthumuni Managa
- Institute for Nanotechnology and Water Sustainability, College of Science, Engineering and Technology, University of South Africa, Florida1709, Johannesburg, South Africa
| | - Thabo T I Nkambule
- Institute for Nanotechnology and Water Sustainability, College of Science, Engineering and Technology, University of South Africa, Florida1709, Johannesburg, South Africa
| | - Alex T Kuvarega
- Institute for Nanotechnology and Water Sustainability, College of Science, Engineering and Technology, University of South Africa, Florida1709, Johannesburg, South Africa
| |
Collapse
|
6
|
Pal S, Padmanabhan SK, Kaitheri A, Epifani M, Licciulli A. Efficient Solar Light Photocatalyst Made of Ag 3PO 4 Coated TiO 2-SiO 2 Microspheres. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:588. [PMID: 36770549 PMCID: PMC9921011 DOI: 10.3390/nano13030588] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/02/2023] [Revised: 01/20/2023] [Accepted: 01/27/2023] [Indexed: 06/18/2023]
Abstract
Solar light active photocatalyst was prepared as silver phosphate (Ag3PO4) coating on titania-silica (TiO2-SiO2) microspheres. Titania-silica microsphere was obtained by spray drying TiO2-SiO2 colloidal solutions, whereas Ag3PO4 was applied by wet impregnation. XRD on the granules and SEM analysis show that the silver phosphate particles cover the surface of the titania-silica microspheres, and UV-visible diffuse reflectance analysis highlights that Ag3PO4/TiO2-SiO2 composites can absorb the entire visible light spectrum. BET measurements show higher specific surface area of the composite samples compared to bare Ag3PO4. Photocatalytic activity was evaluated by dye degradation tests under solar light irradiation. The prepared catalysts follow a pseudo-first-order rate law for dye degradation tests under solar light irradiation. The composite catalysts with an Ag3PO4/TiO2-SiO2 ratio of 1:1.6 wt% show better catalytic activity towards both rhodamine B and methylene blue degradation and compared with the results with uncoated TiO2-SiO2 microspheres and the benchmark commercial TiO2 (Evonik-P25) as a reference. The composite photocatalyst showed exceptional efficiency compared to its pristine counterparts and reference material. This is explained as having a higher surface area with optimum light absorption capacity.
Collapse
Affiliation(s)
- Sudipto Pal
- Department of Engineering for Innovation, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | | | - Amruth Kaitheri
- Department of Engineering for Innovation, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Mauro Epifani
- Istituto per la Microelettronica e Microsistemi, IMM-CNR, Via Monteroni, 73100 Lecce, Italy
| | - Antonio Licciulli
- Department of Engineering for Innovation, University of Salento, Via Monteroni, 73100 Lecce, Italy
- Institute of Nanotechnology, CNR Nanotec, Consiglio Nazionale Delle Ricerche, Via Monteroni, 73100 Lecce, Italy
| |
Collapse
|
7
|
Memisoglu G, Murugesan RC, Zubia J, Rozhin AG. Graphene Nanocomposite Membranes: Fabrication and Water Treatment Applications. MEMBRANES 2023; 13:145. [PMID: 36837648 PMCID: PMC9965488 DOI: 10.3390/membranes13020145] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/31/2022] [Revised: 01/14/2023] [Accepted: 01/18/2023] [Indexed: 05/31/2023]
Abstract
Graphene, a two-dimensional hexagonal honeycomb carbon structure, is widely used in membrane technologies thanks to its unique optical, electrical, mechanical, thermal, chemical and photoelectric properties. The light weight, mechanical strength, anti-bacterial effect, and pollution-adsorption properties of graphene membranes are valuable in water treatment studies. Incorporation of nanoparticles like carbon nanotubes (CNTs) and metal oxide into the graphene filtering nanocomposite membrane structure can provide an improved photocatalysis process in a water treatment system. With the rapid development of graphene nanocomposites and graphene nanocomposite membrane-based acoustically supported filtering systems, including CNTs and visible-light active metal oxide photocatalyst, it is necessary to develop the researches of sustainable and environmentally friendly applications that can lead to new and groundbreaking water treatment systems. In this review, characteristic properties of graphene and graphene nanocomposites are examined, various methods for the synthesis and dispersion processes of graphene, CNTs, metal oxide and polymer nanocomposites and membrane fabrication and characterization techniques are discussed in details with using literature reports and our laboratory experimental results. Recent membrane developments in water treatment applications and graphene-based membranes are reviewed, and the current challenges and future prospects of membrane technology are discussed.
Collapse
Affiliation(s)
- Gorkem Memisoglu
- Department of Communications Engineering, Escuela de Ingeniería de Bilbao, University of the Basque Country (UPV/EHU), E-48013 Bilbao, Spain
- Department of Electronics Technology, Istiklal University, Kahramanmaras 46300, Türkiye
| | | | - Joseba Zubia
- Department of Communications Engineering, Escuela de Ingeniería de Bilbao, University of the Basque Country (UPV/EHU), E-48013 Bilbao, Spain
| | - Aleksey G. Rozhin
- Aston Institute of Photonic Technologies, Aston University, Birmingham B4 7ET, UK
| |
Collapse
|
8
|
De AK, Kamal N, Kumar U, Jatav N, Sinha I. The bandgap of sulfur-doped Ag 2O nanoparticles. Phys Chem Chem Phys 2023; 25:2320-2330. [PMID: 36598031 DOI: 10.1039/d2cp05236a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
A narrow band gap restricts photocatalytic applications of Ag2O nanoparticles, but appropriate doping can favorably modify this aspect. Given this, density functional theory (DFT) calculations were conducted, revealing that substitutional sulfur doping of Ag2O could increase its bandgap and stabilize oxygen vacancies. A hydrothermal precipitation protocol was employed to prepare sulfur-doped (S-doped) Ag2O nanoparticles. The band gap of the prepared nanoparticles increased to 1.89 eV with 1.25-mole percent S-doping. XPS analysis of the samples also revealed that S-doping increased oxygen vacancies in the prepared Ag2O nanoparticles. Furthermore, S-doping caused a major shift in the valence band position to a negative value. These doped Ag2O nanoparticles showed an enhanced visible-light photocatalytic activity towards rhodamine B (RhB) degradation.
Collapse
Affiliation(s)
- Arup Kumar De
- Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi, 221005, India.
| | - Neha Kamal
- Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi, 221005, India.
| | - Uttam Kumar
- Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi, 221005, India.
| | - Neha Jatav
- Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi, 221005, India.
| | - Indrajit Sinha
- Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi, 221005, India.
| |
Collapse
|
9
|
Abd Rahman N, Choong CE, Pichiah S, Nah IW, Kim JR, Oh SE, Yoon Y, Choi EH, Jang M. Recent advances in the TiO2 based photoreactors for removing contaminants of emerging concern in water. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2022.122294] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
10
|
Abdul-Hussein YM, Hussain RK, Khalaf MK. Aerosol-Assisted Chemical Vapor Deposition (AACVD) Technique of SrTiO3: B Thin Films and Study the Structural and Optical Properties and Hall Effect Measurements. AL-MUSTANSIRIYAH JOURNAL OF SCIENCE 2022. [DOI: 10.23851/mjs.v33i4.1177] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
Aerosol-assisted chemical vapor deposition (AACVD) technique is very precise implemented to fabrication of structured SrTiO3 and Sr1-xBxTiO3 thin films at doping ratio (x = 2, 4, 6 and 8) % at temperature 400 °C on a glass substrate. The X-Ray Diffraction (XRD) patterns illustrated that the SrTiO3 and Sr1-xBxTiO3 thin films have a polycrystalline nature and cubic structure, the detailed characterization of the films by X-ray diffraction (XRD), the Surface Morphology studied by using (AFM) and (SEM). Have been noticed from AFM measurement the Roughness and RMS were increased with increases doping ratio. The optical properties of SrTiO3 and Sr1-xBxTiO3 thin films have been studied at doping ratio (x = 2, 4, 6 and 8) % at rate (300-900) nm. The transmittance spectrum is characterized by the opposite behavior of the absorbance spectrum. The transmittance generally increases with the increase in the wavelength of radiation, at wavelengths with low energies while the absorbance decreased slowly at spectrum rate (300-900) nm i.e. in the visible region. The band gap (Eg) is decreased at (3.2 - 2.5) eV which indicates that the doping process has led to the emergence of localized levels in the region confined by the valence and conduction bands, led to a reduction in the photon energy required for direct electronic transitions to occur. Found the carriers concentration charge are holes of Sr1-xBxTiO3 thin films at doping ratio (x = 2, 4, 6 and 8) %. Many properties can be improved by adding impurities such as Boron (B) to the SrTiO3, which can be used in solar cells, electronic industries or thermoelectric generators by controlling the optical or structural properties of the material by controlling the materials and percentages of impurity, or through heat treatment of the material, such as annealing, for example or exposure to different temperatures.
Collapse
|
11
|
A Brief Review of Photocatalytic Reactors Used for Persistent Pesticides Degradation. CHEMENGINEERING 2022. [DOI: 10.3390/chemengineering6060089] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Pesticide pollution is a major issue, given their intensive use in the 20th century, which led to their accumulation in the environment. At the international level, strict regulations are imposed on the use of pesticides, simultaneously with the increasing interest of researchers from all over the world to find methods of neutralizing them. Photocatalytic degradation is an intensively studied method to be applied for the degradation of pesticides, especially through the use of solar energy. The mechanisms of photocatalysis are studied and implemented in pilot and semi-pilot installations on experimental platforms, in order to be able to make this method more efficient and to identify the equipment that can achieve the photodegradation of pesticides with the highest possible yields. This paper proposes a brief review of the impact of pesticides on the environment and some techniques for their degradation, with the main emphasis on different photoreactor configurations, using slurry or immobilized photocatalysts. This review highlights the efforts of researchers to harmonize the main elements of photocatalysis: choice of the photocatalyst, and the way of photocatalyst integration within photoreaction configuration, in order to make the transfer of momentum, mass, and energy as efficient as possible for optimal excitation of the photocatalyst.
Collapse
|
12
|
Xie Y, Khoo KS, Chew KW, Devadas VV, Phang SJ, Lim HR, Rajendran S, Show PL. Advancement of renewable energy technologies via artificial and microalgae photosynthesis. BIORESOURCE TECHNOLOGY 2022; 363:127830. [PMID: 36029982 DOI: 10.1016/j.biortech.2022.127830] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2022] [Revised: 08/19/2022] [Accepted: 08/21/2022] [Indexed: 06/15/2023]
Abstract
There has been an urgent need to tackle global climate change and replace conventional fuels with alternatives from sustainable sources. This has led to the emergence of bioenergy sources like biofuels and biohydrogen extracted from microalgae biomass. Microalgae takes up carbon dioxide and absorbs sunlight, as part of its photosynthesis process, for growth and producing useful compounds for renewable energy. While, the developments in artificial photosynthesis to a chemical process that biomimics the natural photosynthesis process to fix CO2 in the air. However, the artificial photosynthesis technology is still being investigated for its implementation in large scale production. Microalgae photosynthesis can provide the same advantages as artificial photosynthesis, along with the prospect of having final microalgae products suitable for various application. There are significant potential to adapt either microalgae photosynthesis or artificial photosynthesis to reduce the CO2 in the climate and contribute to a cleaner and green cultivation method.
Collapse
Affiliation(s)
- Youping Xie
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350108, China
| | - Kuan Shiong Khoo
- Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan, Taiwan
| | - Kit Wayne Chew
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Jalan Sunsuria, Bandar Sunsuria, 43900 Sepang, Selangor Darul Ehsan, Malaysia
| | - Vishno Vardhan Devadas
- Department of Chemical and Environmental Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Jalan Broga, 43500 Semenyih, Selangor Darul Ehsan, Malaysia
| | - Sue Jiun Phang
- School of Engineering and Physical Sciences, Heriot-Watt University Malaysia, Jalan Venna P5/2, Precinct 5, 62200 Putrajaya, Malaysia
| | - Hooi Ren Lim
- Department of Chemical and Environmental Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Jalan Broga, 43500 Semenyih, Selangor Darul Ehsan, Malaysia
| | - Saravanan Rajendran
- Faculty of Engineering, Department of Mechanical Engineering, University of Tarapacá, Avda. General Velasquez, 1775 Arica, Chile
| | - Pau Loke Show
- Department of Chemical and Environmental Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Jalan Broga, 43500 Semenyih, Selangor Darul Ehsan, Malaysia; Zhejiang Provincial Key Laboratory for Subtropical Water Environment and Marine Biological Resources Protection, Wenzhou University, Wenzhou 325035, China; Department of Sustainable Engineering, Saveetha School of Engineering, SIMATS, Chennai 602105, India.
| |
Collapse
|
13
|
Jamaludin L, Razak RA, Abdullah MMAB, Vizureanu P, Bras A, Imjai T, Sandu AV, Abd Rahim SZ, Yong HC. The Suitability of Photocatalyst Precursor Materials in Geopolymer Coating Applications: A Review. COATINGS 2022; 12:1348. [DOI: 10.3390/coatings12091348] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/01/2023]
Abstract
Today, the building and construction sector demands environmentally friendly and sustainable protective coatings using inorganic coating materials for safe, non-hazardous, and great performance. Many researchers have been working on sustainable solutions to protect concrete and metal infrastructures against corrosion and surface deterioration with the intention of introducing green alternatives to conventional coatings. This article presents a review of developments of geopolymer pastes doped with different types of photocatalyst precursors including factors affecting geopolymer properties for enhancing coating with photocatalytic performance. Photodegradation using geopolymer photocatalyst has great potential for resolving harmless substances and removing pollutants when energized with ultraviolet (UV) light. Although geopolymer is a potentially new material with great properties, there has been less research focusing on the development of this coating. This study demonstrated that geopolymer binders are ideal precursor support materials for the synthesis of photocatalytic materials, with a significant potential for optimizing their distinctive properties.
Collapse
|
14
|
Khan ME, Mohammad A, Yoon T. State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications. CHEMOSPHERE 2022; 302:134815. [PMID: 35526688 DOI: 10.1016/j.chemosphere.2022.134815] [Citation(s) in RCA: 36] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2022] [Revised: 04/25/2022] [Accepted: 04/29/2022] [Indexed: 06/14/2023]
Abstract
Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.
Collapse
Affiliation(s)
- Mohammad Ehtisham Khan
- Department of Chemical Engineering Technology, College of Applied Industrial Technology (CAIT), Jazan University, Jazan, 45971, Saudi Arabia.
| | - Akbar Mohammad
- School of Chemical Engineering, Yeungnam University, Gyeongsan-si, Gyeongbuk, 38541, South Korea.
| | - Taeho Yoon
- School of Chemical Engineering, Yeungnam University, Gyeongsan-si, Gyeongbuk, 38541, South Korea.
| |
Collapse
|
15
|
Chakachaka V, Tshangana C, Mahlangu O, Mamba B, Muleja A. Interdependence of Kinetics and Fluid Dynamics in the Design of Photocatalytic Membrane Reactors. MEMBRANES 2022; 12:membranes12080745. [PMID: 36005662 PMCID: PMC9412706 DOI: 10.3390/membranes12080745] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Revised: 06/11/2022] [Accepted: 06/15/2022] [Indexed: 01/18/2023]
Abstract
Photocatalytic membrane reactors (PMRs) are a promising technology for wastewater reclamation. The principles of PMRs are based on photocatalytic degradation and membrane rejection, the different processes occurring simultaneously. Coupled photocatalysis and membrane filtration has made PMRs suitable for application in the removal of emerging contaminants (ECs), such as diclofenac, carbamazepine, ibuprofen, lincomycin, diphenhydramine, rhodamine, and tamoxifen, from wastewater, while reducing the likelihood of byproducts being present in the permeate stream. The viability of PMRs depends on the hypotheses used during design and the kinetic properties of the systems. The choice of design models and the assumptions made in their application can have an impact on reactor design outcomes. A design’s resilience is due to the development of a mathematical model that links material and mass balances to various sub-models, including the fluid dynamic model, the radiation emission model, the radiation absorption model, and the kinetic model. Hence, this review addresses the discrepancies with traditional kinetic models, fluid flow dynamics, and radiation emission and absorption, all of which have an impact on upscaling and reactor design. Computational and analytical descriptions of how to develop a PMR system with high throughput, performance, and energy efficiency are provided. The potential solutions are classified according to the catalyst, fluid dynamics, thickness, geometry, and light source used. Two main PMR types are comprehensively described, and a discussion of various influential factors relating to PMRs was used as a premise for developing an ideal reactor. The aim of this work was to resolve potential divergences that occur during PMRs design as most real reactors do not conform to the idealized fluid dynamics. Lastly, the application of PMRs is evaluated, not only in relation to the removal of endocrine-disrupting compounds (EDCs) from wastewater, but also in dye, oil, heavy metals, and pesticide removal.
Collapse
|
16
|
Goh PS, Kang HS, Ismail AF, Khor WH, Quen LK, Higgins D. Nanomaterials for microplastic remediation from aquatic environment: Why nano matters? CHEMOSPHERE 2022; 299:134418. [PMID: 35351478 DOI: 10.1016/j.chemosphere.2022.134418] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/24/2021] [Revised: 03/21/2022] [Accepted: 03/23/2022] [Indexed: 06/14/2023]
Abstract
The contamination of microplastics in aquatic environment is regarded as a serious threat to ecosystem especially to aquatic environment. Microplastic pollution associated problems including their bioaccumulation and ecological risks have become a major concern of the public and scientific community. The removal of microplastics from their discharge points is an effective way to mitigate the adverse effects of microplastic pollution, hence has been the central of the research in this realm. Presently, most of the commonly used water or wastewater treatment technologies are capable of removing microplastic to certain extent, although they are not intentionally installed for this reason. Nevertheless, recognizing the adverse effects posed by microplastic pollution, more efforts are still desired to enhance the current microplastic removal technologies. With their structural multifunctionalities and flexibility, nanomaterials have been increasingly used for water and wastewater treatment to improve the treatment efficiency. Particularly, the unique features of nanomaterials have been harnessed in synthesizing high performance adsorbent and photocatalyst for microplastic removal from aqueous environment. This review looks into the potentials of nanomaterials in offering constructive solutions to resolve the bottlenecks and enhance the efficiencies of the existing materials used for microplastic removal. The current efforts and research direction of which studies can dedicate to improve microplastic removal from water environment with the augmentation of nanomaterial-enabled strategies are discussed. The progresses made to date have witnessed the benefits of harnessing the structural and dimensional advantages of nanomaterials to enhance the efficiency of existing microplastic treatment processes to achieve a more sustainable microplastic cleanup.
Collapse
Affiliation(s)
- P S Goh
- Advanced Membrane Technology Research Centre, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia.
| | - H S Kang
- Marine Technology Centre, Institute for Vehicle System & Engineering, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia.
| | - A F Ismail
- Advanced Membrane Technology Research Centre, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia
| | - W H Khor
- Marine Technology Centre, Institute for Vehicle System & Engineering, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia
| | - L K Quen
- Mechanical Precision Engineering Department, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, 54100, Kuala Lumpur, Malaysia
| | - D Higgins
- The Ocean Cleanup Interception B.V., 3014, JH Rotterdam, the Netherlands
| |
Collapse
|
17
|
Recent and Emerging Trends in Remediation of Methylene Blue Dye from Wastewater by Using Zinc Oxide Nanoparticles. WATER 2022. [DOI: 10.3390/w14111749] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
Due to the increased demand for clothes by the growing population, the dye-based sectors have seen fast growth in the recent decade. Among all the dyes, methylene blue dye is the most commonly used in textiles, resulting in dye effluent contamination. It is carcinogenic, which raises the stakes for the environment. The numerous sources of methylene blue dye and their effective treatment procedures are addressed in the current review. Even among nanoparticles, photocatalytic materials, such as TiO2, ZnO, and Fe3O4, have shown greater potential for photocatalytic methylene blue degradation. Such nano-sized metal oxides are the most ideal materials for the removal of water pollutants, as these materials are related to the qualities of flexibility, simplicity, efficiency, versatility, and high surface reactivity. The use of nanoparticles generated from waste materials to remediate methylene blue is highlighted in the present review.
Collapse
|
18
|
Manganese Ferrite-Hydroxyapatite Nanocomposite Synthesis: Biogenic Waste Remodeling for Water Decontamination. NANOMATERIALS 2022; 12:nano12101631. [PMID: 35630853 PMCID: PMC9143517 DOI: 10.3390/nano12101631] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/01/2022] [Revised: 04/26/2022] [Accepted: 05/08/2022] [Indexed: 12/10/2022]
Abstract
Environmental pollution, especially water pollution caused by dyes, heavy metal ions and biological pathogens, is a root cause of various lethal diseases in human-beings and animals. Water purification materials and treatment methods are overpriced. Consequently, there is an imperative outlook observance for cheap materials for the purification of wastewaters. In order to fill up the projected demand for clean water, the present study aimed to make use of cost-effective and environmentally friendly methods to convert bone-waste from animals such as cows into novel composites for the decontamination of water. The bone-waste of slaughtered cows from the Najran region of Saudi Arabia was collected and used for the synthesis of hydroxyapatite based on the thermal method. The synthesized hydroxyapatite (Ca10(PO4)6(OH)2) was utilized to prepare a manganese ferrite/hydroxyapatite composite. The nanocomposite was categorized by diverse sophisticated procedures, for instance XRD, FE-SEM, EDX, TEM, UV, PL and FT-IR. This composite possesses outstanding photocatalytic activity against methylene blue dye, which is a common pollutant from industrial wastes. Moreover, the synthesised composite revealed exceptional bacteriostatic commotion towards E. coli and S. aureus bacteria, which are accountable for acute waterborne infections. The outcome of this study demonstrated that the integration of manganese ferrite into hydroxyapatite significantly intensified both antimicrobial and photocatalytic actions when compared to the virgin hydroxyapatite.
Collapse
|
19
|
Hydrogen Production as a Clean Energy Carrier through Heterojunction Semiconductors for Environmental Remediation. ENERGIES 2022. [DOI: 10.3390/en15093222] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
Today, as a result of the advancement of technology and increasing environmental problems, the need for clean energy has considerably increased. In this regard, hydrogen, which is a clean and sustainable energy carrier with high energy density, is among the well-regarded and effective means to deliver and store energy, and can also be used for environmental remediation purposes. Renewable hydrogen energy carriers can successfully substitute fossil fuels and decrease carbon dioxide (CO2) emissions and reduce the rate of global warming. Hydrogen generation from sustainable solar energy and water sources is an environmentally friendly resolution for growing global energy demands. Among various solar hydrogen production routes, semiconductor-based photocatalysis seems a promising scheme that is mainly performed using two kinds of homogeneous and heterogeneous methods, of which the latter is more advantageous. During semiconductor-based heterogeneous photocatalysis, a solid material is stimulated by exposure to light and generates an electron–hole pair that subsequently takes part in redox reactions leading to hydrogen production. This review paper tries to thoroughly introduce and discuss various semiconductor-based photocatalysis processes for environmental remediation with a specific focus on heterojunction semiconductors with the hope that it will pave the way for new designs with higher performance to protect the environment.
Collapse
|
20
|
Prabhavathy S, Dakshanamoorthy A. Visible light-induced Silver and Lanthanum co-doped BiVO4 nanoparticles for photocatalytic dye degradation of organic pollutants. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.109483] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
21
|
Irshad M, Ain QT, Zaman M, Aslam MZ, Kousar N, Asim M, Rafique M, Siraj K, Tabish AN, Usman M, Hassan Farooq MU, Assiri MA, Imran M. Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future. RSC Adv 2022; 12:7009-7039. [PMID: 35424711 PMCID: PMC8982362 DOI: 10.1039/d1ra08185c] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2021] [Accepted: 02/21/2022] [Indexed: 01/08/2023] Open
Abstract
The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.
Collapse
Affiliation(s)
- Muneeb Irshad
- Department of Physics, University of Engineering and Technology Lahore 54890 Pakistan
| | - Quar Tul Ain
- Department of Physics, University of Engineering and Technology Lahore 54890 Pakistan
| | - Muhammad Zaman
- Department of Physics, University of Engineering and Technology Lahore 54890 Pakistan
| | | | - Naila Kousar
- Department of Physics, University of Engineering and Technology Lahore 54890 Pakistan
| | - Muhammad Asim
- Department of Physics, University of Engineering and Technology Lahore 54890 Pakistan
| | | | - Khurram Siraj
- Department of Physics, University of Engineering and Technology Lahore 54890 Pakistan
| | - Asif Nadeem Tabish
- Department of Chemical Engineering, University of Engineering and Technology, New Campus Lahore Pakistan
| | - Muhammad Usman
- Department of Mechanical Engineering, University of Engineering and Technology Lahore 54890 Pakistan
| | - Masood Ul Hassan Farooq
- Department of Basic Sciences, University of Engineering and Technology, New Campus Lahore Pakistan
| | - Mohammed Ali Assiri
- Department of Chemistry, Faculty of Science, Research Center for Advanced Materials Science (RCAMS), King Khalid University P. O. Box 9004 Abha 61413 Saudia Arabia
| | - Muhammad Imran
- Department of Chemistry, Faculty of Science, Research Center for Advanced Materials Science (RCAMS), King Khalid University P. O. Box 9004 Abha 61413 Saudia Arabia
| |
Collapse
|
22
|
Tabassum S, Govindaraju S, Kendrekar P. (Mes-Acr-Me)+ClO4– Catalyzed Visible Light-Supported, One-Pot Green Synthesis of 1,8-Naphthyridine-3-Carbonitriles. Top Catal 2022. [DOI: 10.1007/s11244-022-01583-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
23
|
Amakiri KT, Angelis-Dimakis A, Ramirez Canon A. Recent advances, influencing factors, and future research prospects using photocatalytic process for produced water treatment. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2022; 85:769-788. [PMID: 35166699 DOI: 10.2166/wst.2021.641] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Oilfield-produced water is the primary by-product generated during oil and gas extraction operations. Oilfield-produced water is often severely toxic and poses substantial health, safety, and environmental issues; adequate treatment technologies can bring these streams to a quality level. Photocatalysis is a photochemical catalytic reaction that is a highly promising tool for environmental remediation due to its efficiency in mineralizing persistent and potentially toxic contaminants. However, there is limited understanding of its application to treat oilfield-produced water with a complex and highly variable water composition. This review article discusses the mechanisms and current state of heterogeneous photocatalytic systems for oilfield-produced water treatment, highlighting impediments to knowledge transfer, including the feasibility of practical applications and the identification of essential research requirements. Additionally, the effects of significant variables such as catalyst quantity, pH, organic compound concentration, light intensity, and wavelength are discussed in detail. Some solutions are proposed for scientists and engineers interested in advancing the development of industrial-scale photocatalytic water treatment technologies.
Collapse
|
24
|
Mohammadi N, Allahresani A, Naghizadeh A. Enhanced photo-catalytic degradation of natural organic matters (NOMs) with a novel fibrous silica-copper sulfide nanocomposite (KCC1-CuS). J Mol Struct 2022. [DOI: 10.1016/j.molstruc.2021.131624] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
25
|
Photocatalytic Degradation of Fluoroquinolone Antibiotics in Solution by Au@ZnO-rGO-gC3N4 Composites. Catalysts 2022. [DOI: 10.3390/catal12020166] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/10/2022] Open
Abstract
The photocatalytic degradation of two quinolone-type antibiotics (ciprofloxacin and levofloxacin) in aqueous solution was studied, using catalysts based on ZnO nanoparticles, which were synthesized by a thermal procedure. The efficiency of ZnO was subsequently optimized by incorporating different co-catalysts of gC3N4, reduced graphene oxide, and nanoparticles of gold. The catalysts were fully characterized by electron microscopy (TEM and SEM), XPS, XRD, Raman, and BET surface area. The most efficient catalyst was 10%Au@ZnONPs-3%rGO-3%gC3N4, obtaining degradations of both pollutants above 96%. This catalyst has the largest specific area, and its activity was related to a synergistic effect, involving factors such as the surface of the material and the ability to absorb radiation in the visible region, mainly produced by the incorporation of rGO and gC3N4 in the semiconductor. The use of different scavengers during the catalytic process, was used to establish the possible photodegradation mechanism of both antibiotics.
Collapse
|
26
|
Engineering Commercial TiO 2 Powder into Tailored Beads for Efficient Water Purification. MATERIALS 2022; 15:ma15010326. [PMID: 35009473 PMCID: PMC8746151 DOI: 10.3390/ma15010326] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/06/2021] [Revised: 12/27/2021] [Accepted: 12/31/2021] [Indexed: 11/16/2022]
Abstract
In this study, efficient commercial photocatalyst (Degussa P25) nanoparticles were effectively dispersed and stabilized in alginate, a metal binding biopolymer. Taking advantage of alginate’s superior metal chelating properties, copper nanoparticle-decorated photocatalysts were developed after a pyrolytic or calcination-sintering procedure, yielding ceramic beads with enhanced photocatalytic and mechanical properties, excellent resistance to attrition, and optimized handling compared to powdered photocatalysts. The morphological and structural characteristics were studied using LN2 porosimetry, SEM, and XRD. The abatement of an organic pollutant (Methyl Orange, MO) was explored in the dark and under UV irradiation via batch experiments. The final properties of the photocatalytic beads were defined by both the synthesis procedure and the heat treatment conditions, allowing for their further optimization. It was found that the pyrolytic carbon residuals enabled the adhesion of the TiO2 nanoparticles, acting as binder, and increased the MO adsorption capacity, leading to increased local concentration in the photocatalyst vicinity. Well dispersed Cu nanoparticles were also found to enhance photocatalytic activity. The prepared photocatalysts exhibited increased MO adsorption capacity (up to 3.0 mg/g) and also high photocatalytic efficiency of about 50% MO removal from water solutions, reaching an overall MO rejection of about 80%, at short contact times (3 h). Finally, the prepared photocatalysts kept their efficiency for at least four successive photocatalytic cycles.
Collapse
|
27
|
Cecconet D, Sturini M, Malavasi L, Capodaglio AG. Graphitic Carbon Nitride as a Sustainable Photocatalyst Material for Pollutants Removal. State-of-the Art, Preliminary Tests and Application Perspectives. MATERIALS (BASEL, SWITZERLAND) 2021; 14:7368. [PMID: 34885523 PMCID: PMC8658503 DOI: 10.3390/ma14237368] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/14/2021] [Revised: 11/22/2021] [Accepted: 11/24/2021] [Indexed: 11/25/2022]
Abstract
Photocatalysis is an attractive strategy for emerging pollutants remediation. Research towards the development of new, efficient and effective catalytic materials with high activity under wide irradiation spectra is a highly active sector in material science. Various semiconductor materials have been employed as photocatalysts, including TiO2, SrTiO3, CdS, BiVO4, Ta3N5, TaON, Ag3PO4, and g-C3N4. The latter is a metal-free, low cost polymer, providing high adsorption and catalytic properties, shown to be promising for photocatalysis applications under visible light. Furthermore, g-C3N4 composites are among the most promising advanced photocatalytical materials that can be produced by green synthesis processes. In this paper, the state-of-the-art of g-C3N4 applications is reviewed, and application perspectives are discussed. Photocatalysis tests with g-C3N4 under Xenon irradiation were performed to gather first-hand information to improve photoreactor design. Xenon light spectrum appears to be a suitable radiation source to replace direct sunlight in engineered pollutants removal processes catalyzed by g-C3N4, in lieu of other currently used heterogeneous photocatalysis processes (e.g., TiO2-UV). LED sources are also very promising due to higher energy efficiency and customizable, catalyzer-specific irradiation spectra.
Collapse
Affiliation(s)
- Daniele Cecconet
- Department of Civil Engineering & Architecture, University of Pavia, 27100 Pavia, Italy;
| | - Michela Sturini
- Department of Chemistry, University of Pavia, 27100 Pavia, Italy; (M.S.); (L.M.)
| | - Lorenzo Malavasi
- Department of Chemistry, University of Pavia, 27100 Pavia, Italy; (M.S.); (L.M.)
| | - Andrea G. Capodaglio
- Department of Civil Engineering & Architecture, University of Pavia, 27100 Pavia, Italy;
| |
Collapse
|
28
|
Hupfer ML, Blaschke D, Schmidt H, Presselt M. Embedding an Amphiphilic 4-Hydroxy Thiazole Dye in Langmuir Matrices: Studying Miscibilities with Arylic and Alkylic Matrix Amphiphiles via Langmuir Isotherms and Photo-induced Force Microscopy. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:13255-13264. [PMID: 34726417 DOI: 10.1021/acs.langmuir.1c01772] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
We present here a fundamental study on the miscibility between a prototype amphiphilic dye and alkylic and arylic Langmuir monolayers. Embedding dyes in such matrices is crucial for utilizing dyes in any photo-energy conversion process if the involved dyes form aggregates that provide thermal deactivation channels. Because miscibility in Langmuir matrices depends on the blending ratio between the dye and matrix and on the Langmuir film density, as characterized via the surface pressure and the mean molecular area, we employ Langmuir miscibility studies to identify ideal miscibility parameters for each matrix. Atomic force microscopy (AFM) results support miscibility between the dye and both matrix materials at low surface pressures, where smooth and homogeneous films are obtained. AFM and photo-induced force microscopy (PiFM) reveal phase separation if the Langmuir monolayers are deposited at surface pressures above 8 mN/m at which reorientation of the chromophores has been reported. The nanoscale chemical fingerprint mapping enabled by PiFM enables assigning segregated spots to small stearic acid (SA)-enriched domains that have not been detected via AFM, thus demonstrating the value of the IR-spectroscopic contrast provided by PiFM. In this work, we have presented a so far unexploited matrix material (terphenylene carboxylic acid; TPCA) and found it equally suitable for embedding dyes as the standard amphiphile SA. In contrast to SA, TPCA is composed of rigid and electrically conducting π-electron systems, hence, being predestined for aligning dyes in Langmuir matrices and for application in optoelectronic systems.
Collapse
Affiliation(s)
- Maximilian L Hupfer
- Institute of Physical Chemistry, Friedrich Schiller University Jena, Helmholtzweg 4, 07743 Jena, Germany
- Leibniz Institute of Photonic Technology (IPHT), Albert-Einstein-Str. 9, 07745 Jena, Germany
| | - Daniel Blaschke
- Leibniz Institute of Photonic Technology (IPHT), Albert-Einstein-Str. 9, 07745 Jena, Germany
| | - Heidemarie Schmidt
- Leibniz Institute of Photonic Technology (IPHT), Albert-Einstein-Str. 9, 07745 Jena, Germany
| | - Martin Presselt
- Leibniz Institute of Photonic Technology (IPHT), Albert-Einstein-Str. 9, 07745 Jena, Germany
- Center for Energy and Environmental Chemistry Jena (CEEC Jena), Friedrich Schiller University Jena, Philosophenweg 7a, 07743 Jena, Germany
| |
Collapse
|
29
|
Nguyen HT, Pham MT, Nguyen TMT, Bui HM, Wang YF, You SJ. Modifications of conventional organic membranes with photocatalysts for antifouling and self-cleaning properties applied in wastewater filtration and separation processes: A review. SEP SCI TECHNOL 2021. [DOI: 10.1080/01496395.2021.1982981] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
Affiliation(s)
- Hieu Trung Nguyen
- Department of Civil Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
- Institute of Applied Technology, Thu Dau Mot University, Thu Dau Mot City, Binh Duong Province, Vietnam
- Center for Environmental Risk Management, Chung Yuan Christian University, Taoyuan City, Taiwan
| | - Minh-Thuan Pham
- Department of Civil Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
- Center for Environmental Risk Management, Chung Yuan Christian University, Taoyuan City, Taiwan
| | - Truc-Mai Thi Nguyen
- Center for Environmental Toxin and Emerging-Contaminant Research, Cheng Shiu University, Kaohsiung, Taiwan, ROC
| | - Ha Manh Bui
- Department of Environmental Sciences, Saigon University, Ho Chi Minh City, Vietnam
| | - Ya-Fen Wang
- Center for Environmental Risk Management, Chung Yuan Christian University, Taoyuan City, Taiwan
- Department of Environmental Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
| | - Sheng-Jie You
- Center for Environmental Risk Management, Chung Yuan Christian University, Taoyuan City, Taiwan
- Department of Environmental Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
| |
Collapse
|
30
|
Iqbal N, Afzal A, Khan I, Khan MS, Qurashi A. Molybdenum impregnated g-C 3N 4 nanotubes as potentially active photocatalyst for renewable energy applications. Sci Rep 2021; 11:16886. [PMID: 34413449 PMCID: PMC8377046 DOI: 10.1038/s41598-021-96490-6] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2021] [Accepted: 08/11/2021] [Indexed: 11/12/2022] Open
Abstract
Molybdenum (Mo) impregnated g-C3N4 (Mo-CN) nanotubes are fabricated via a thermal/hydrothermal process to augment photoelectrochemical properties during solar-driven water-splitting (SDWS) reactions. Graphitic-C3N4 is an attractive material for photocatalysis because of its suitable band energy, high thermal and chemical stability. The FE-SEM and HR-TEM comprehend the nanotube-like morphology of Mo-CN. The spectroscopic characterization revealed bandgap energy of 2.63 eV with high visible-light activity. The x-ray diffraction of pristine g-C3N4 and Mo-CN nanotubes discloses the formation of triazine-based nanocrystalline g-C3N4, which remains stable during hydrothermal impregnation of Mo. Furthermore, Mo-CN nanotubes possess high sp2-hybridized nitrogen content, and metallic/oxidized Mo nanoparticles (in a ratio of 1:2) are impregnated into g-C3N4. The XPS analysis confirms C, N, and Mo for known atomic and oxidation states in Mo-CN. Furthermore, high photocurrent efficiency (~ 5.5 mA/cm2) is observed from 5%-Mo-CN nanotubes. That displays efficient SDWS by 5%-Mo-CN nanotubes than other counterparts. Impedance spectroscopy illustrated the lowest charge transfer resistance (Rct) of 5%-Mo-CN nanotubes, which further confirms the fast electron transfer kinetics and efficient charge separation resulting in high photocurrent generation. Hence, 5%Mo-CN composite nanotubes can serve as a potential photocatalytic material for viable solar-driven water splitting.
Collapse
Affiliation(s)
- Naseer Iqbal
- Department of Chemistry, College of Science, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia.
| | - Adeel Afzal
- Department of Chemistry, College of Science, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia
| | - Ibrahim Khan
- Center of Research Excellence in Nanotechnology, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| | - Muhammad Shahzeb Khan
- Department of Mechanical Engineering, College of Engineering, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia
| | - Ahsanulhaq Qurashi
- Center of Research Excellence in Nanotechnology, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
- Department of Chemistry, Khalifa University of Science and Technology, Main Campus, P.O. Box 127788, Abu Dhabi, United Arab Emirates
| |
Collapse
|
31
|
Electric Field Assisted Femtosecond Laser Preparation of Au@TiO 2 Composites with Controlled Morphology and Crystallinity for Photocatalytic Degradation. MATERIALS 2021; 14:ma14143816. [PMID: 34300735 PMCID: PMC8303837 DOI: 10.3390/ma14143816] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/05/2021] [Revised: 06/24/2021] [Accepted: 06/26/2021] [Indexed: 12/13/2022]
Abstract
TiO2 is popular in photocatalytic degradation dye pollutants due to its abundance and its stability under photochemical conditions. Au loaded TiO2 can achieve efficient absorption of visible light and deal with the problem of low conversion efficiency for solar energy of TiO2. This work presents a new strategy to prepare Au nanoparticles-loaded TiO2 composites through electric−field−assisted temporally−shaped femtosecond laser liquid-phase ablation of Au3+ and amorphous TiO2. By adjusting the laser pulse delay and electric field parameters, gold nanoparticles with different structures can be obtained, such as nanospheres, nanoclusters, and nanostars (AuNSs). AuNSs can promote the local crystallization of amorphous TiO2 in the preparation process and higher free electron density can also be excited to work together with the mixed crystalline phase, hindering the recombination between carriers and holes to achieve efficient photocatalytic degradation. The methylene blue can be effectively degraded by 86% within 30 min, and much higher than the 10% of Au nanoparticles loaded amorphous TiO2. Moreover, the present study reveals the crystallization process and control methods for preparing nanoparticles by laser liquid ablation, providing a green and effective new method for the preparation of high-efficiency photocatalytic materials.
Collapse
|
32
|
The Evolution of Photocatalytic Membrane Reactors over the Last 20 Years: A State of the Art Perspective. Catalysts 2021. [DOI: 10.3390/catal11070775] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023] Open
Abstract
The research on photocatalytic membrane reactors (PMRs) started around the year 2000 with the study of wastewater treatment by degradation reactions of recalcitrant organic pollutants, and since then the evolution of our scientific knowledge has increased significantly, broadening interest in reactions such as the synthesis of organic chemicals. In this paper, we focus on some initial problems and how they have been solved/reduced over time to improve the performance of processes in PMRs. Some know-how gained during these last two decades of research concerns decreasing/avoiding the degradation of the polymeric membranes, improving photocatalyst reuse, decreasing membrane fouling, enhancing visible light photocatalysts, and improving selectivity towards the reaction product(s) in synthesis reactions (partial oxidation and reduction). All these aspects are discussed in detail in this review. This technology seems quite mature in the case of water and wastewater treatment using submerged photocatalytic membrane reactors (SPMRs), while for applications concerning synthesis reactions, additional knowledge is required.
Collapse
|