Immobilization of Catalase on Chitosan/ZnO and Chitosan/ZnO/Fe2O3 Nanocomposites: A Comparative Study

Green immobilization: Enhancing enzyme stability and reusability on eco-friendly support

In the current years of heightened focus on green chemistry and sustainable materials, this study delves into the untapped potential of hyaluronic acid (HA), chitin, and chitosan-prominent polysaccharides for groundbreaking applications. The primary aim is to effectively immobilize catalase enzymes onto matrices composed of chitosan, chitin, HA/chitin, and HA/chitosan. The rigorous investigation covers a spectrum of structural enhancements encompassing pH and temperature stability, thermal resilience, half-life extension, storage durability, reusability, and comprehensive FTIR analyses of the catalase immobilization. Notably, catalase activity demonstrated remarkable resilience on HA/chitin and HA/chitosan matrices, maintaining 73.80% and 79.55% efficacy even after 25 cycles. The introduction of covalent cross-linking between catalase and HA/chitin or HA/chitosan, facilitated by a cross-linking agent, significantly amplified stability and recycling efficiency. Consequently, the immobilized catalase showcases substantial promise across a spectrum of industrial applications, spanning from food and detergent production to bioremediation and diverse commercial processes. This underscores its pivotal role as a versatile and invaluable innovation in the realm of sustainable technologies.

Enhancing the sustainable immobilization of laccase by amino-functionalized PMMA-reinforced graphene nanomaterial

Human health and the environment are negatively affected by endocrine-disrupting chemicals (EDCs), such as bisphenol A. Therefore, developing appropriate remediation methods is essential for efficiently removing phenolic compounds from aqueous solutions. Enzymatic biodegradation is a potential biotechnological approach for responsibly addressing water pollution. With its high catalytic efficiency and few by-products, laccase is an eco-friendly biocatalyst with significant promise for biodegradation. Herein, two novel supporting materials (NH2-PMMA and NH2-PMMA-Gr) were fabricated via the functionalization of poly(methylmethacrylate) (PMMA) polymer using ethylenediamine and reinforced with graphene followed by glutaraldehyde activation. NH2-PMMA and NH2-PMMA-Gr were utilized for laccase immobilization with an immobilization yield (IY%) of 78.3% and 82.5% and an activity yield (AY%) of 81.2% and 85.9%, respectively. Scanning electron microscope (SEM) and Fourier-transform infrared (FTIR) were used to study the characteristics of fabricated material supports. NH2-PMMA-Gr@laccase exhibited an optimal pH profile from 4.5 to 5.0, while NH2-PMMA@laccase exhibited optimum pH at 5.0 compared to a value of 4.0 for free form. A wider temperature ranges of 40-50 °C was noted for both immobilized laccases compared to a value of 40 °C for the free form. Additionally, it was reported that immobilized laccase outperformed free laccase in terms of substrate affinity and storage stability. NH2-PMMA@laccase and NH2-PMMA-Gr@laccase improved stability by up to 3.9 and 4.6-fold when stored for 30 days at 4 °C and preserved up to 80.5% and 86.7% of relative activity after ten cycles of reuse. Finally, the degradation of BPA was achieved using NH2-PMMA@laccase and NH2-PMMA-Gr@laccase. After five cycles, NH2-PMMA@laccase and NH2-PMMA-Gr@laccase showed that the residual degradation of BPA was 77% and 84.5% using 50 μm of BPA. This study introduces a novel, high-performance material for organic pollution remediation in wastewater that would inspire further progress.

Enzyme-triggered approach to reduce water bodies' contamination using peroxidase-immobilized ZnO/SnO2/alginate nanocomposite

Enzyme immobilization on solid support offers advantages over free enzymes by overcoming characteristic limitations. To synthesize new stable and hyperactive nano-biocatalysts (co-precipitation method), ginger peroxidase (GP) was surface immobilized (adsorption) on ZnO/SnO2 and ZnO/SnO2/SA nanocomposite with immobilization efficacy of 94 % and 99 %, respectively. Thereafter, catalytic and biochemical characteristics of free and immobilized GP were investigated by deploying various techniques, i.e., FTIR, PXRD, SEM, and PL. Diffraction peaks emerged at 2θ values of 26°, 33°, 37°, 51°, 31°, 34°, 36°, 56°, indicating the formation of SnO2 and ZnO. The OH stretching of the H2O molecules was attributed to broad peaks between 3200 and 3500 cm-1, whereas ZnO/SnO2 spikes occurred in the 1626-1637 cm-1 range. SnO stretching mode and ZnO terminal vibrational patterns have been verified at corresponding wavelengths of 625 cm-1 and 560 cm-1. Enzyme entrapment onto substrate was verified via interactions between GP and ZnO/SnO2/SA as corroborated by signals beneath 1100 cm-1. GP-immobilized fractions were optimally active at pH 5, 50 °C, and retained maximum activity after storage of 4 weeks at -4 °C. Kinetic parameters were determined by using a Lineweaver-Burk plot and Vmax for free GP, ZnO/SnO2/GP and ZnO/SnO2/SA/GP with guaiacol as a substrate, were found to be 322.58, 49.01 and 11.45 (μM/min) respectively. A decrease in values of Vmax and KM indicates strong adsorption of peroxidase on support and maximum affinity between nano support and enzyme, respectively. For environmental remediation, free ginger peroxidase (GP), ZnO/SnO2/GP and ZnO/SnO2/SA/GP fractions effectively eradicated highly intricate dye. Multiple scavengers had a significant impact on the depletion of the dye. In conclusion, ZnO/SnO2 and ZnO/SnO2/SA nanostructures comprise an ecologically acceptable and intriguing carrier for enzyme immobilization.

Amorphous-crystalline phase transition and intrinsic magnetic property of nickel organic framework for easy immobilization and recycling of β-Galactosidase

This work describes the synthesis of fibrous nickel-based metal organic framework (Ni-ZIF) via simple solvothermal method. The material formed was calcinated at 400, 600, 800 °C to improve its surface area, porosity and enzyme binding capacity. Changes in X-ray diffraction pattern after calcination revealed the Ni-ZIF transitioned from amorphous to crystalline structure. The surface area, pore volume and pore size for Ni-ZIF@600 were found to be 312.15 m2/g, 0.88 cm3/g and 10.28 nm, with an enzyme loading capacity of 593.85 mg/g after 30 h The free (β-Gal-LEH) and immobilized β-Galactosidase were stable at pH 7.5, temperature 50 °C, and yielded 70.70 and 63.95 mM glucose after milk lactose hydrolysis, respectively. The Ni-ZIF@600@β-Gal-LEH exhibited high enzyme retention capacity, maintaining 59.44 % of its original activity after 6-cycles. The enhanced magnetic property, enzyme binding capacity and easy recoverability of the calcinated Ni-ZIF could guarantee its industrial significance as immobilization module for enzyme-mediated catalysis.

Sustainable Immobilization of β-Glucosidase onto Silver Ions and AgNPs-Loaded Acrylic Fabric with Enhanced Stability and Reusability

Modified polymer design has attracted significant attention for enzyme immobilization, offering promising applications. In this study, amine-terminated polymers were synthesized by incorporating functional groups into polyacrylonitrile using hexamethylenediamine. This work highlights the successful enzyme immobilization strategy using modified polymers, offering improved stability and expanded operational conditions for potential biotechnological applications. The resulting amino groups were utilized to capture silver ions, which were subsequently converted to silver nanoparticles (AgNPs). The obtained materials, AgNPs@TA-HMDA (acrylic textiles coated silver nanoparticles AgNPs) and Ag(I)@TA-HMDA (acrylic textiles coated with Ag ion) were employed as supports for β-glucosidase enzyme immobilization. The highest immobilization yields (IY%) were achieved with AgNPs@TA-HMDA at 92%, followed by Ag(I)@TA-HMDA at 79.8%, resulting in activity yields (AY%) of 81% and 73%, respectively. Characterization techniques such as FTIR, FE-SEM, EDX, TG/DTG, DSC, and zeta potential were employed to investigate the structural composition, surface morphologies, elemental composition, thermal properties, and surface charge of the support materials. After 15 reuses, the preservation percentages decreased to 76% for AgNPs@TA-HMDA/β-Glu and 65% for Ag(I)@TA-HMDA/β-Glu. Storage stability revealed that the decrease in activity for the immobilized enzymes was smaller than the free enzyme. The optimal pH for the immobilized enzymes was broader (pH 5.5 to 6.5) compared to the free enzyme (pH 5.0), and the optimal temperature for the immobilized enzymes was 60 °C, slightly higher than the free enzyme's optimal temperature of 50 °C. The kinetic analysis showed a slight increase in Michaelis constant (Km) values for the immobilized enzymes and a decrease in maximum velocity (Vmax), turnover number (Kcat), and specificity constant (Kcat/Km) values compared to the free enzyme. Through extensive characterization, we gained valuable insights into the structural composition and properties of the modified polymer supports. This research significantly contributes to the development of efficient biotechnological processes by advancing the field of enzyme immobilization and offering valuable knowledge for its potential applications.

Chitosan-Based metal-organic framework for Stabilization of β-glucosidase: Reusability and storage stability

Enzyme immobilization is a powerful tool for protecting enzymes from harsh reaction conditions and improving enzyme activity, stability, and reusability. In this study, metal organic frameworks (MIL-Fe composites) were synthesized via solvothermal reactions and then modified with chitosan (CS). β-Glucosidase was immobilized on the chitosan-metal organic framework (CS-MIL-Fe), and the resulting composites were characterized with various analytical techniques. The β-glucosidase immobilized on a CS-MIL-Fe composite had an immobilization yield of 85 % and a recovered activity of 74 %. The immobilized enzyme retained 81 % of its initial activity after ten successive cycles and preserved 69 % of its original activity after 30 days of storage at 4 °C. In contrast, the free enzyme had only preserved 32 % of its original activity after 30 days. Under various temperature and pH conditions, the immobilized enzyme showed greater stability than the free enzyme, and the optimal temperature and pH were 60 °C and 6.0 for the immobilized enzyme and 50 °C and 5.0 for the free enzyme. The kinetic parameters were also determined, with the Km values of 13.4 and 6.98 mM for the immobilized and free β-glucosidase, respectively, and Vmax values of 3.96 and 1.72 U/mL, respectively. Overall, these results demonstrate that the CS-MIL-Fe@β-glucosidase is a promising matrix showing high catalytic efficiency and enhanced stability.

Co-Immobilization of a Multi-Enzyme Cascade: (S)-Selective Amine Transaminases, l-Amino Acid Oxidase and Catalase

An enzyme cascade was established previously consisting of a recycling system with an l-amino acid oxidase (hcLAAO4) and a catalase (hCAT) for different α-keto acid co-substrates of (S)-selective amine transaminases (ATAs) in kinetic resolutions of racemic amines. Only 1 mol % of the co-substrate was required and l-amino acids instead of α-keto acids could be applied. However, soluble enzymes cannot be reused easily. Immobilization of hcLAAO4, hCAT and the (S)-selective ATA from Vibrio fluvialis (ATA-Vfl) was addressed here. Immobilization of the enzymes together rather than on separate beads showed higher reaction rates most likely due to fast co-substrate channeling between ATA-Vfl and hcLAAO4 due to their close proximity. Co-immobilization allowed further reduction of the co-substrate amount to 0.1 mol % most likely due to a more efficient H2 O2 -removal caused by the stabilized hCAT and its proximity to hcLAAO4. Finally, the co-immobilized enzyme cascade was reused in 3 cycles of preparative kinetic resolutions to produce (R)-1-PEA with high enantiomeric purity (97.3 %ee). Further recycling was inefficient due to the instability of ATA-Vfl, while hcLAAO4 and hCAT revealed high stability. An engineered ATA-Vfl-8M was used in the co-immobilized enzyme cascade to produce (R)-1-(3-ethoxy-4-methoxyphenyl)-2-(methylsulfonyl)ethanamine, an apremilast-intermediate, with a 1,000 fold lower input of the co-substrate.

Green, Eco-Friendly, Highly Biocompatible and Bioactive Nanocomposite-Based Biopolymers Loaded with ZnO@Fe3O4 Nanoparticles

Biocompatibility is a major concern for promising multifunctional bioactive materials. Unfortunately, bioactive materials lack biocompatibility in some respects, so active ingredient formulations are urgently needed. Bimetallic nanoparticles have demonstrated drawbacks in stabilized biocompatible formulations. This study examined the preparation of biomaterial-based multifunctional biopolymers via an eco-friendly formulation method using ultrasound. Bimetallic zinc oxide/iron oxide (magnetic form) nanoparticles (ZnO@Fe3O4NPs) were formulated using casein and starch as capping agents and stabilizers. The formulated nanocomposite was characterized using ultraviolet-visible spectroscopy (UV-vis), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HR-TEM). Herein, the formulated nanocomposite was shown to have a thermally stable nanostructure, and the bimetallic ZnO@Fe3O4 NPs were measured as 85 nm length and 13 nm width. Additionally, the biocompatibility test showed its excellent cytocompatibility with Wi 38 and Vero normal cell lines, with IC50 550 and 650 mg/mL, respectively. Moreover, the antimicrobial activity was noted against six pathogens that are represent to the most common pathogenic microbes, with the time required for killing of bacteria and unicellular fungi being 19 h and 61 h for filamentous fungi with remarket an excellent antioxidant activity.

Acrylic fabric and nanomaterials to enhance α-amylase-based biocatalytic immobilized systems for industrial food applications

An innovative approach for immobilizing α-amylase was used in this investigation. The acrylic fabric was first treated with hexamethylene diamine (HMDA) and then coated with copper ions that were later reduced to copper nanoparticles (CuNPs). The corresponding materials obtained, Cu(II)@HMDA-TA and CuNPs@HMDA-TA, were employed as carriers for α-amylase, respectively. The structural and morphological characteristics of the produced support matrices before and after immobilization were assessed using various techniques, including FTIR, SEM, EDX, TG/DTG, DSC, and zeta potential. The immobilized α-amylase exhibited the highest level of activity at pH 7.0, with immobilization yields observed for CuNPs@HMDA-TA (81.7 %) (60 unit/g support) followed by Cu(II)@HMDA-TA (71.7 %) (49 unit/g support) and 75 % and 61 % of activity yields, and 91.7 % and 85 % of immobilization efficiency, respectively. Meanwhile, biochemical characterizations of the activity of the soluble and immobilized enzymes were carried out and compared. Optimal temperature, pH, kinetics, storage stability, and reusability parameters were optimized for immobilized enzyme activity. The optimal pH and temperature were recorded as 6.0 and 50 °C for soluble α-amylase while the two forms of immobilized α-amylase exhibit a broad pH of 6.0-7.0 and optimal temperature at 60 °C. After recycling 15 times, the immobilized α-amylase on CuNPs@HMDA-TA and Cu(II)@HMDA-TA preserved 63 % and 52 % of their activities, respectively. The two forms of immobilized α-amylase displayed high stability when stored for 6 weeks and preserved 85 % and 76 % of their activities, respectively. Km values were calculated as 1.22, 1.39, and 1.84 mg/mL for soluble, immobilized enzymes on CuNPs@HMDA-TA, and Cu(II)@HMDA-TA, and Vmax values were calculated as 36.25, 29.68, and 21.57 μmol/mL/min, respectively. The total phenolic contents of maize kernels improved 1.4 ± 0.01 fold after treatment by two immobilized α-amylases.

Biodegradation of environmental pollutants using catalase-based biocatalytic systems

The synergistic combination of biocatalysts and nanomaterials provides a new interface of a robust biocatalytic system that can effectively remediate environmental pollutants. Enzymes, such as catalase-based constructs, impart the desired candidature for catalytic transformation processes and are potential alternatives to replace conventional remediation strategies that have become laborious and somewhat inefficient. Furthermore, the controlled or uncontrolled discharge of various emerging pollutants (EPs) into water bodies is equally proportional to the fast-growing population and extensive urbanization. EPs affect the entire living being and continuously deteriorate the environmental system, directly or indirectly. The occurrence of EPs (even released after partial treatments, but still in bioactive forms) disturbs ecological integrity. Due to the ineffectiveness of in-practice traditional remediation processes, new and robust treatment measures as effective and sustainable remediation have become a meaningful goal. In this context, special attention has been shifted to engineering an enzyme (catalase)-based biodegradation system with immense prospects in environmental cleanup. The unique synergistic combination of nanomaterials (having multifunctional attributes) with enzymes of interest makes them a state-of-the-art interface that can further ameliorate bio-catalysis and biodegradation performance. This review covers current research and scientific advancement in developing and deploying catalase-based biocatalytic systems to mitigate several EPs from the environment matrices. The biocatalytic features of catalase, along with the mechanistic insight into H₂O₂ neutralization, several nano-based materials loaded with catalase, including nanoparticles (NPs), carbon nanotubes (CNTs), metal-organic frameworks (MOFs), polymeric-based composites, oxime-functionalized cryo-gel disks, electro-spun nanofibrous membranes, and other hybrid materials have also been discussed with suitable examples.

Optimization of Alpha-Amylase Production by a Local Bacillus paramycoides Isolate and Immobilization on Chitosan-Loaded Barium Ferrite Nanoparticles

We set out to isolate alpha-amylase producers from soil samples, optimize the production, and immobilize the enzyme on chitosan-loaded barium ferrite nanoparticles (CLBFNPs). Alpha-amylase producers were isolated on starch agar plates and confirmed by dinitrosalicylic acid assay. The potent isolate was identified by phenotypic methods, 16S-rRNA sequencing, and phylogenetic mapping. Sequential optimization of α-amylase production involved the use of Plackett–Burman (P–BD) and central composite designs (CCD), in addition to exposing the culture to different doses of gamma irradiation. Alpha-amylase was immobilized on CLBFNPs, and the nanocomposite was characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy, with energy-dispersive analysis of X-ray analysis. Forty-five α-amylase producers were isolated from 100 soil samples. The highest activity (177.12 ± 6.12 U/mg) was detected in the MS009 isolate, which was identified as Bacillus paramycoides. The activity increased to 222.3 ± 5.07 U/mg when using the optimal culture conditions identified by P–BD and CCD, and to 319.45 ± 4.91 U/mg after exposing the culture to 6 kGy. Immobilization of α-amylase on CLBFNPs resulted in higher activity (246.85 ± 6.76 U/mg) compared to free α-amylase (222.254 ± 4.89 U/mg), in addition to retaining activity for up to five cycles of usage. Gamma irradiation improved α-amylase production, while immobilization on CLBFNPs enhanced activity, facilitated enzyme recovery, and enabled its repetitive use.

Zinc oxide nanoparticles-impregnated chitosan surfaces for covalent immobilization of trypsin: Stability & kinetic studies

Trypsin (Try, EC. 3.4.21.4) was effectively immobilized on the surface of glutaraldehyde(GA)-activated ZnO/Chitosan nanocomposite through covalent attachment via Schiff-base linkages. Size, structure, surface morphology, & percentage elemental composition of the prepared ZnO nanoparticles and chitosan-coated ZnO nanocomposite were studied by UV-Visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-Ray diffraction analysis (XRD), transmission electron microscopy (TEM), Scanning electron microscopy (SEM), and Energy-Dispersive X-Ray Microanalysis (EDAX) techniques. Optimal immobilization conditions (incubation time (16 h), enzyme concentration (1.8 mg/ml), and pH (7.8)) were investigated to obtain the maximum expressed activity of the immobilized trypsin. Immobilized & solubilized trypsin exhibited the optimum catalytic activity at pH 8.5, 60 °C, and pH 7.8, 45 °C respectively. Kinetic parameters (K_m, V_max) of immobilized (27.12 μM, 8.82 μM/min) & free trypsin (25.76 μM, 4.16 μM/min) were determined, indicating that efficiency of trypsin improves after immobilization. Immobilized trypsin preserved 67% of initial activity at 50 °C during 2 h of incubation & sustained nearly 50% of catalytic activity until the 9th repeated cycle of utilization. Moreover, immobilized trypsin retained 50% of enzymatic activity after 90 days of storage at 4 °C. Hence, the current findings suggest that ZnO/Chitosan-GA-Trypsin would be a promising biocatalyst for large-scale biotechnological applications.

Epoxy functionalized iron oxide magnetic nanoparticles for catalase enzyme covalent immobilization

An aqueous solution of magnetite (Fe3O4) nanoparticles was synthesized using the method of co-precipitation. The nanoparticles were activated with epichlorohydrin for covalently immobilizing the catalase enzyme. The immobilization conditions were optimized as 0.07 mg/ml catalase for 1 h contact time. The properties of free and immobilized catalase were also investigated. The immobilized enzyme showed enhanced activity at alkaline pH and retained about 90% of its relative activity between pH (6–8) and resisted the high temperature and retained 90% of its relative activity at 50 °C. Kinetic parameters of free and immobilized catalase were investigated. While the Vmax value of the immobilized enzyme was reduced 2.4 fold compared to the free enzyme, the KM value of the immobilized catalase was higher by 2.2 fold than the free enzyme. The formulated matrix enhanced the velocity of the immobilized catalase more than the free one and was able to be used for about 18 cycles with retention of 80% of its activity. The immobilized catalase on epoxy functionalized iron oxide nanoparticles is promising as a nano-bio-catalyst carrying out in many industries and different fields.

A New Clark-Type Layered Double Hydroxides-Enzyme Biosensor for H2O2 Determination in Highly Diluted Real Matrices: Milk and Cosmetics

A new catalase amperometric biosensor for hydroperoxides detection has been built as part of research aimed at the development of biosensors based on layered double hydroxides (LDH) used as support for enzyme immobilization. The fabricated device differs from those developed so far, usually based on an LDH enzyme nanocomposite adsorbed on a glassy carbon (GC) electrode and cross-linked by glutaraldehyde, since it is based on an amperometric gas diffusion electrode (Clark type) instead of a GC electrode. The new biosensor, which still uses LDH synthesized by us and catalase enzyme, is robust and compact, shows a lower LOD (limit of detection) value and a linearity range shifted at lower concentrations than direct amperometric GC biosensor, but above all, it is not affected by turbidity or emulsions, or by the presence of possible soluble species, which are reduced to the cathode at the same redox potential. This made it possible to carry out accurate and efficient determination of H2O2 even in complex or cloudy real matrices, also containing very low concentrations of hydrogen peroxide, such as milk and cosmetic products, i.e., matrices that would have been impossible to analyze otherwise, using conventional biosensors based on a GC–LDH enzyme. An inaccuracy ≤ 7.7% for cosmetic samples and ≤8.0% for milk samples and a precision between 0.7 and 1.5 (as RSD%), according to cosmetic or milk samples analyzed, were achieved.

Recent Advances in Biocatalysis and Metabolic Engineering

Biocatalysis refers to the utilization of enzymes, either in purified form, or existed as part of crude cell lysate or intact cells, to catalyze single- or multi-step chemical reactions, converting synthetic molecules or natural metabolites into high-value products [...]

Immobilization of Camel Liver Catalase on Nanosilver-Coated Cotton Fabric

Nanoparticles have the advantage of a superior surface area to volume ratio, and thus such materials are useful for enzyme immobilization. A silver nanoparticle coated cotton fabric (AgNp-CF) is used to immobilize camel liver catalase in the present work. The effect of loading levels of AgNp inside cotton fabrics on the immobilization of catalase was investigated. The results revealed that a 6 mL loading level of AgNp precursor (silver nitrate, 2 mM) at pH 8 showed the maximum immobilization efficiency (76%). The morphological properties of the cotton fabric (CF), AgNp-CF and AgNp-CF-catalase were characterized by SEM. The reusability of the immobilized enzyme was tested over ten reuses to show a 67% retained function of its initial activity. Compared with the soluble enzyme’s working pH (6.5), a rather broader working pH (6.5–7.0) was observed for the immobilized catalase. Additionally, the optimum working temperature increased from 30 for the soluble enzyme to 40 °C for the immobilized one, indicating thermal stability. The free and immobilized catalase enzyme’s Km values were 22.5 and 25 mM H2O2, respectively, reflecting the enzyme’s effective properties. The inhibitory effect of metal ions on the enzyme activity was higher toward soluble catalase than the immobilized catalase. This work has developed a method for immobilizing catalase to be useful for several applications.