Titanium Dioxide (TiO2) Mesocrystals: Synthesis, Growth Mechanisms and Photocatalytic Properties

Exploring the Potential of Nonclassical Crystallization Pathways to Advance Cementitious Materials

Understanding the crystallization of cement-binding phases, from basic units to macroscopic structures, can enhance cement performance, reduce clinker use, and lower CO2 emissions in the construction sector. This review examines the crystallization pathways of C-S-H (the main phase in PC cement) and other alternative binding phases, particularly as cement formulations evolve toward increasing SCMs and alternative binders as clinker replacements. We adopt a nonclassical crystallization perspective, which recognizes the existence of critical intermediate steps between ions in solution and the final crystalline phases, such as solute ion associates, dense liquid phases, amorphous intermediates, and nanoparticles. These multistep pathways uncover innovative strategies for controlling the crystallization of binding phases through additive use, potentially leading to highly optimized cement matrices. An outstanding example of additive-controlled crystallization in cementitious materials is the synthetically produced mesocrystalline C-S-H, renowned for its remarkable flexural strength. This highly ordered microstructure, which intercalates soft matter between inorganic and brittle C-S-H, was obtained by controlling the assembly of individual C-S-H subunits. While large-scale production of cementitious materials by a bottom-up self-assembly method is not yet feasible, the fundamental insights into the crystallization mechanism of cement binding phases presented here provide a foundation for developing advanced cement-based materials.

Merits and Demerits of ODE Modeling of Physicochemical Systems for Numerical Simulations

In comparison with the first-principles calculations mostly using partial differential equations (PDEs), numerical simulations with modeling by ordinary differential equations (ODEs) are sometimes superior in that they are computationally more economical and that important factors are more easily traced. However, a demerit of ODE modeling is the need of model validation through comparison with experimental data or results of the first-principles calculations. In the present review, examples of ODE modeling are reviewed such as sonochemical reactions inside a cavitation bubble, oriented attachment of nanocrystals, dynamic response of flexoelectric polarization, ultrasound-assisted sintering, and dynamics of a gas parcel in a thermoacoustic engine.

Improving of photocatalytic activity of barium ferrate via bismuth and copper co-doping for degradation of paracetamol under visible light irradiation

Nanosized Ba_1-xBi_xFe_1-xCu_xO₃ (12-50 nm) with x values of 0, 0.01, 0.05, and 0.1 system was prepared using the Pechini method. Structural, morphological, surface and optical characterizations were performed for the prepared samples. Cubic phase was the predominant phase for the undoped BaFeO₃ and Bi and Cu co-doped BaFeO₃ samples. Minor phases of monoclinic Ba₂Fe₂O₅, orthorhombic BaFe₂O₄ and orthorhombic BaCO₃ were identified for all the prepared samples. Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ sample has the lowest band gap (2.43 eV). 98.1% paracetamol removal was achieved with 0.75 g/L of Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ at pH 9 after 120 min. The paracetamol degradation follows the pseudo first-order kinetics. HO^• is the main oxidative species responsible for the paracetamol degradation. Gas chromatography-mass spectrometry (GC-MS) analysis was performed at the end of the photocatalytic degradation experiment under optimum operating condition using Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ to explain the reaction mechanism and identify the intermediate by-products which is confirmed by ultraviolet/visible (UV/Vis) spectroscopy study at different reaction times.

Photocatalytic degradation of 2,4-DNT in simulated wastewater by magnetic CoFe2O4/SiO2/TiO2 nanoparticles

Discharge of 2,4-dinitrotoluene (2,4-DNT) into the environment leads to a serious soil and water sources pollution problem, due to toxicity and possible carcinogenicity of this toxic substance. In this work, the photocatalytic degradation of 2,4-DNT was investigated using CoFe₂O₄/SiO₂/TiO₂ nanoparticles. The catalyst features were characterized by using XRD, TEM, EDX, UV-vis DRS, FTIR, and VSM techniques. The influence of different experimental factors on degradation efficiency including pH value, catalyst dosages, and initiate concentration of 2,4-DNT were investigated. Mineralization of the model pollutant was determined using TOC analysis under optimum conditions. A possible mechanism, process kinetic and reusability of magnetic photocatalyst were also performed. In optimum experimental conditions (pH=3, photocatalyst dosage=0.75 g/L, 2,4-DNT=0.025 g/L), degradation efficiency achieved 88.5% within 180-min reaction time with TOC removal of 55.6%. Dominate oxidizing radicals during the degradation of 2,4-DNT by CoFe₂O₄/SiO₂/TiO₂ were hydroxyl radicals. The photocatalytic degradation of 2,4-DNT followed first-order rate kinetics. After three successive use cycles, the degradation efficiency was reduced by 64%. Our results revealed that the synthesized CoFe₂O₄/SiO₂/TiO₂ photocatalyst was a good choice for degradation of 2,4-DNT, due to proper potential reusability and catalytic activity.

One-step synthesis of vanadium-doped anatase mesocrystals for Li-ion battery anodes

Here we report a successful one-step synthesis of vanadium-doped anatase mesocrystals by reactive annealing of NH₄TiOF₃/PEG2000 mesocrystal precursors with NH₄VO₃. The formation solid solution Ti_1-xV_xO₂with vanadium content up tox = 25 at% inheriting the structure of mesocrystals is observed for the first time. The doping mechanism via vapor phase transport of vanadium is proposed. The Ti_1-xV_xO₂mesocrystals exhibit improved specific capacity of 175 mAh g^-1(compared to 150 mAh g^-1for pure anatase phase) and decreased potential gap between charge and discharge processes.

Multiphoton Upconversion Materials for Photocatalysis and Environmental Remediation

Solar-driven photocatalysis holds great potential for energy conversion, environmental remediation, and sustainable chemistry. However, practical applications of conventional photocatalytic systems have been constrained by their insufficient ability to harvest solar radiation in the infrared spectrum. Lanthanide-doped upconversion materials possess high photostability, tunable absorption, and the ability to convert low-energy infrared radiation into high-energy emission, making them attractive for infrared-driven photocatalysis. This review highlights essential principles for rational design of efficient photocatalysts. Particular emphasis is placed on current state-of-the-arts that offer enhanced upconversion luminescence efficiency. We also summarize recent advances in lanthanide-doped upconversion materials for photocatalysis. We conclude with new challenges and prospects for future developments of infrared-driven photocatalysts.

Tuning the shape and crystal phase of TiO2 nanoparticles for catalysis

Synthesis of TiO₂ nanoparticles with tunable shape and crystal phase has attracted considerable attention for the design of highly efficient heterogeneous catalysts. Tailoring the shape of TiO₂, in the crystal phases of anatase, rutile, brookite and TiO₂(B), allows tuning of the atomic configurations on the dominantly exposed facets for maximizing the active sites and regulating the reaction route towards a specific channel for achieving high selectivity. Moreover, the shape and crystal phase of TiO₂ nanoparticles alter their interactions with metal species, which are commonly termed as strong metal-support interactions involving interfacial strain and charge transfer. On the other hand, metal particles, clusters and single atoms interact differently with TiO₂, because of the variation of the electronic structure, while the surface of TiO₂ determines the interfacial bonding via a geometric effect. The dynamic behavior of the metal-titania interfaces, driven by the chemisorption of the reactive molecules at elevated temperatures, also plays a decisive role in elaborating the structure-reactivity relationship.

Construction of Inorganic Bulks through Coalescence of Particle Precursors

Bulk inorganic materials play important roles in human society, and their construction is commonly achieved by the coalescence of inorganic nano- or micro-sized particles. Understanding the coalescence process promotes the elimination of particle interfaces, leading to continuous bulk phases with improved functions. In this review, we mainly focus on the coalescence of ceramic and metal materials for bulk construction. The basic knowledge of coalescent mechanism on inorganic materials is briefly introduced. Then, the properties of the inorganic precursors, which determine the coalescent behaviors of inorganic phases, are discussed from the views of particle interface, size, crystallinity, and orientation. The relationships between fundamental discoveries and industrial applications are emphasized. Based upon the understandings, the applications of inorganic bulk materials produced by the coalescence of their particle precursors are further presented. In conclusion, the challenges of particle coalescence for bulk material construction are presented, and the connection between recent fundamental findings and industrial applications is highlighted, aiming to provide an insightful outlook for the future development of functional inorganic materials.

Exposure Route of TiO2 NPs from Industrial Applications to Wastewater Treatment and Their Impacts on the Agro-Environment

The tremendous increase in the production and consumption of titanium dioxide (TiO2) nanoparticles (NPs) in numerous industrial products and applications has augmented the need to understand their role in wastewater treatment technologies. Likewise, the deleterious effects of wastewater on the environment and natural resources have compelled researchers to find out most suitable, economical and environment friendly approaches for its treatment. In this context, the use of TiO2 NPs as the representative of photocatalytic technology for industrial wastewater treatment is coming to the horizon. For centuries, the use of industrial wastewater to feed agriculture land has been a common practice across the globe and the sewage sludge generated from wastewater treatment plants is also used as fertilizer in agricultural soils. Therefore, it is necessary to be aware of possible exposure pathways of these NPs, especially in the perspective of wastewater treatment and their impacts on the agro-environment. This review highlights the potential exposure route of TiO2 NPs from industrial applications to wastewater treatment and its impacts on the agro-environment. Key elements of the review present the recent developments of TiO2 NPs in two main sectors including wastewater treatment and the agro-environment along with their potential exposure pathways. Furthermore, the direct exposure routes of these NPs from production to end-user consumption until their end phase needs to be studied in detail and optimization of their suitable applications and controlled use to ensure environmental safety.

Editorial: Special Issue on “Emerging Trends in TiO2 Photocatalysis and Applications”

It is not an exaggerated fact that the semiconductor titanium dioxide (TiO2) has been evolved as a prototypical material to understand the photocatalytic process and has been demonstrated for various photocatalytic applications such as pollutants degradation, water splitting, heavy metal reduction, CO2 conversion, N2 fixation, bacterial disinfection, etc [...]

Shabalina A, A. Gerasimova M, L. Nemoykina A, V. Vodyankina O, A. Svetlichnyi V. Highly Defective Dark Nano Titanium Dioxide: Preparation via Pulsed Laser Ablation and Application

The development of methods to synthesize and study the properties of dark titania is of the utmost interest due to prospects for its use, primarily in photocatalysis when excited by visible light. In this work, the dark titania powder was prepared by pulsed laser ablation (Nd:YAG laser, 1064 nm, 7 ns) in water and dried in air. To study the changes occurring in the material, the thermal treatment was applied. The structure, composition, and properties of the obtained powders were studied using transmission electron microscopy, low-temperature N2 adsorption/desorption, X-ray diffraction, thermogravimetry/differential scanning calorimetry, X-ray photoelectron, Raman and UV-vis spectroscopies, and photoluminescence methods. The processes occurring in the initial material upon heating were studied. The electronic structure of the semiconductor materials was investigated, and the nature of the defects providing the visible light absorption was revealed. The photocatalytic and antibacterial activities of the materials obtained were also studied. Dark titania obtained via laser ablation in liquid was found to exhibit catalytic activity in the phenol photodegradation process under visible light (> 420 nm) and showed antibacterial activity against Staphylococcus aureus and bacteriostatic effect towards Escherichia coli.

TiO2 Based Nanostructures for Photocatalytic CO2 Conversion to Valuable Chemicals

Photocatalytic conversion of CO2 to useful products is an alluring approach for acquiring the two-fold benefits of normalizing excess atmospheric CO2 levels and the production of solar chemicals/fuels. Therefore, photocatalytic materials are continuously being developed with enhanced performance in accordance with their respective domains. In recent years, nanostructured photocatalysts such as one dimensional (1-D), two dimensional (2-D) and three dimensional (3-D)/hierarchical have been a subject of great importance because of their explicit advantages over 0-D photocatalysts, including high surface areas, effective charge separation, directional charge transport, and light trapping/scattering effects. Furthermore, the strategy of doping (metals and non-metals), as well as coupling with a secondary material (noble metals, another semiconductor material, graphene, etc.), of nanostructured photocatalysts has resulted in an amplified photocatalytic performance. In the present review article, various titanium dioxide (TiO2)-based nanostructured photocatalysts are briefly overviewed with respect to their application in photocatalytic CO2 conversion to value-added chemicals. This review primarily focuses on the latest developments in TiO2-based nanostructures, specifically 1-D (TiO2 nanotubes, nanorods, nanowires, nanobelts etc.) and 2-D (TiO2 nanosheets, nanolayers), and the reaction conditions and analysis of key parameters and their role in the up-grading and augmentation of photocatalytic performance. Moreover, TiO2-based 3-D and/or hierarchical nanostructures for CO2 conversions are also briefly scrutinized, as they exhibit excellent performance based on the special nanostructure framework, and can be an exemplary photocatalyst architecture demonstrating an admirable performance in the near future.

Comparative Study of Four TiO2-Based Photocatalysts to Degrade 2,4-D in a Semi-Passive System

In this study, the relative efficiency of four forms of supported titanium dioxide (TiO2) as a photocatalyst to degrade 2,4-dichlorophenoxyacetic acid (2,4-D) in Killex®, a commercially available herbicide was studied. Coated glass spheres, anodized plate, anodized mesh, and electro-photocatalysis using the anodized mesh were evaluated under an ultraviolet – light-emitting diode (UV-LED) light source at λ = 365 nm in a semi-passive mode. Energy consumption of the system was used to compare the efficiency of the photocatalysts. The results showed both photospheres and mesh consumed approximately 80 J/cm3 energy followed by electro-photocatalysis (112.2 J/cm3), and the anodized plate (114.5 J/cm3). Although electro-photocatalysis showed the fastest degradation rate (K = 5.04 mg L−1 h−1), its energy consumption was at the same level as the anodized plate with a lower degradation rate constant of 3.07 mg L−1 h−1. The results demonstrated that three-dimensional nanotubes of TiO2 surrounding the mesh provide superior degradation compared to one-dimensional arrays on the planar surface of the anodized plate. With limited broad-scale comparative studies between varieties of different TiO2 supports, this study provides a comparative analysis of relative degradation efficiencies between the four photocatalytic configurations.

Recent advances in carbon quantum dot (CQD)-based two dimensional materials for photocatalytic applications

This review presents up-to-date research findings and critical insights on trending topics of pristine CQDs and CQDs-based 2D nanomaterial composites.