Role of Humic Acid Chemical Structure Derived from Different Biomass Feedstocks on Fe(III) Bioreduction Activity: Implication for Sustainable Use of Bioresources

Fulvic acid-mediated efficient anaerobic digestion for kitchen wastewater: Electrochemical and biochemical mechanisms

Fulvic acid, prevalent in humus derived from the anaerobic digestion of kitchen wastewater, is crucial in organic matter transformation. However, its effects and underlying mechanisms remain unclear. In this study, the fate of anaerobic digestion of artificial and kitchen wastewater with different fulvic acid contents was investigated. The results showed that 125 mg/L fulvic acid resulted in a 64.02 and 51.72 % increase in methane production in synthetic and kitchen wastewater, respectively. Fulvic acid acted as an electron mediator and increased substrate oxidation by boosting NAD and ATP levels, thereby increasing microbial metabolic rates and ensuring an adequate substrate for methane generation. Isotope analysis suggested that fulvic acid boosts the conversion of volatile fatty acids to methane via the interspecies electron transfer pathway. Gene expression analysis revealed that cytochrome c, FAD, and other electron transport coenzymes were upregulated by fulvic acid, thereby enhancing substrate utilisation and biogas quality. Fulvic acid presented a dual stimulatory and inhibitory effect on anaerobic digestion, with concentrations over 125 mg/L diminishing its positive impact. This dual effect may stem from the properties and concentrations of fulvic acid. This study revealed the effect mechanism of fulvic acid and provided insights into the humus performance in anaerobic digestion.

Improved carbon sequestration by utilization of ferrous ions during different organic wastes composting

The humic acid (HA) possesses a more recalcitrant structure, making it crucial carbon components that improve carbon sequestration. Moreover, ferrous ions could improve microbial activity and enhance compost humification, and their oxidation into iron oxides could adsorb carbon components for sequestration. Based on the advantages of low cost and easy availability of ferrous sulfate (FeSO4), this study investigated the effect of FeSO4 on carbon sequestration during composting. Chicken manure (CM) and food waste (FW) composting were carried out in four treatments, namely control (CM, FW) and 5% (w/w) FeSO4 treated groups (CM+, FW+). Results indicated that FeSO4 increased HA content, improved organic carbon stability. Carbon loss for CM, CM+, FW and FW + treatments were 48.5%, 46.2%, 45.0%, and 40.3%, respectively. Meanwhile, FeSO4 enhanced the function of bacterial taxa involved in HA synthesis in CM + treatment, and improved the number of core bacteria significantly associated with formation of HA and iron oxide. SEM analysis verified that role of FeSO4 was significant in promoting HA synthesis during CM + composting, while it was remarkably in enhancing HA sequestration during FW + composting. This article provided fundamental theoretical backing for enhancing HA production and improving carbon sequestration during different materials composting.

Biodegradation of Different Types of Bioplastics through Composting—A Recent Trend in Green Recycling

In recent years, the adoption of sustainable alternatives has become a powerful tool for replacing petroleum-based polymers. As a biodegradable alternative to petroleum-derived plastics, bioplastics are becoming more and more prevalent and have the potential to make a significant contribution to reducing plastic pollution in the environment. Meanwhile, their biodegradation is highly dependent on their environment. The leakage of bioplastics into the environment and their long degradation time frame during waste management processes are becoming major concerns that need further investigation. This review highlights the extent and rate of the biodegradation of bioplastic in composting, soil, and aquatic environments, and examines the biological and environmental factors involved in the process. Furthermore, the review highlights the need for further research on the long-term fate of bioplastics in natural and industrial environments. The roles played by enzymes as biocatalysts and metal compounds as catalysts through composting can help to achieve a sustainable approach to the biodegradation of biopolymers. The knowledge gained in this study will also contribute to the development of policies and assessments for bioplastic waste, as well as provide direction for future bioplastics research and development.

Interactions between Humic Substances and Microorganisms and Their Implications for Nature-like Bioremediation Technologies

The state of the art of the reported data on interactions between microorganisms and HSs is presented herein. The properties of HSs are discussed in terms of microbial utilization, degradation, and transformation. The data on biologically active individual compounds found in HSs are summarized. Bacteria of the phylum Proteobacteria and fungi of the phyla Basidiomycota and Ascomycota were found to be the main HS degraders, while Proteobacteria, Actinobacteria, Bacteroidetes, and Firmicutes were found to be the predominant phyla in humic-reducing microorganisms (HRMs). Some promising aspects of interactions between microorganisms and HSs are discussed as a feasible basis for nature-like biotechnologies, including the production of enzymes capable of catalyzing the oxidative binding of organic pollutants to HSs, while electron shuttling through the utilization of HSs by HRMs as electron shuttles may be used for the enhancement of organic pollutant biodegradation or lowering bioavailability of some metals. Utilization of HSs by HRMs as terminal electron acceptors may suppress electron transfer to CO2, reducing the formation of CH4 in temporarily anoxic systems. The data reported so far are mostly related to the use of HSs as redox compounds. HSs are capable of altering the composition of the microbial community, and there are environmental conditions that determine the efficiency of HSs. To facilitate the development of HS-based technologies, complex studies addressing these factors are in demand.

Catalytic Depolymerization of Date Palm Waste to Valuable C5–C12 Compounds

Lignin depolymerization often requires multiple isolation steps to convert a lignocellulose matrix into high-value chemicals. In addition, lignin structural modification, low yields, and poor product characteristics remain challenges. Direct catalytic depolymerization of lignocellulose from date palm biomass was investigated. Production of high value chemicals heavily depends on optimization of different parameters and method of conversion. The goal of the study was to elucidate the role of different parameters on direct conversion of date palm waste in a bench reactor, targeting valuable C5–C12 compounds. The catalytic performance results demonstrated better liquid yields using a commercial alloy catalyst than with laboratory-prepared transition metal phosphide catalysts made using nickel, cobalt, and iron. According to the gas chromatography-mass spectrometry results, C7–C8 compounds were the largest product fraction. The yield improved from 3.6% without a catalyst to 68.0% with a catalyst. The total lignin product yield was lower without a catalyst (16.0%) than with a catalyst (76.0%). There were substantial differences between the carbon distributions from the commercial alloy catalyst, supported transition metal phosphide catalyst, and catalyst-free processes. This may be due to differences between reaction pathways. Lab-made catalysts cracked the biomass to produce more gases than the alloy catalyst. The final pressure rose from 2 bar at the start of the experiment to 146.15 bar and 46.50 bar after the respective reactions. The particle size, solvent type, time, temperature, gas, and catalytic loading conditions were 180 µm, methanol, 6 h, 300 °C, nitrogen, and 5 wt %, respectively. The results from this study provide a deep understanding of the role of different process parameters, the positive attributes of the direct conversion method, and viability of date palm waste as a potential lignocellulose for production of high-value chemicals.

Catalytic Biomass to Renewable Biofuels and Biomaterials

As the only renewable carbon source, biomass can be converted into biofuels, chemicals, and biomaterials, such as ethanol, butanol, glucose, furfural, biochar, and bio-oils, and is considered as a substitute for fossil oil [...]

Roles of different humin and heavy-metal resistant bacteria from composting on heavy metal removal

This study aims to assess the roles of different humin and heavy-metal resistant bacterial community from composting on heavy metal removal. The results showed that the concentration of Cu²⁺, Zn²⁺, Ni²⁺, Pb²⁺, Cr³⁺ and Cd²⁺ decreased with adding the compost-derived humin, but the removal rates were relatively low (<30% on average). The heavy metal resistant bacteria from composting have better metal binding capacities than humin, and the combined addition of humin and bacteria could further stimulate the biosorption of heavy metals with 60-80% removal of metals and improve the diversity and biomass of bacterial community. There was obviously increased synergy between the humin from maturity phase and bacteria for metal biosorption ("1 + 1 > 2"). Structural equation modeling showed that microbial biomass and humin humification are the key factors for the biosorption of heavy metals. Combining humin from maturity phase with heavy-metal resistant bacteria was suggested to control heavy metal pollution in composts.