MoS2-Based Substrates for Surface-Enhanced Raman Scattering: Fundamentals, Progress and Perspective

Silver Decoration of Vertically Aligned MoS2-MoOx Nanosheets: A Comprehensive XPS Investigation

This study investigates the simultaneous decoration of vertically aligned molybdenum disulfide nanostructure (VA-MoS2) with Ag nanoparticles (NPs) and nitrogen functionalization. Nitrogen functionalization was achieved through physical vapor deposition (PVD) DC-magnetron sputtering using nitrogen as a reactive gas, aiming to induce p-type behavior in MoS2. The utilization of reactive sputtering resulted in the growth of three-dimensional silver structures on the surface of MoS2, promoting the formation of silver nanoparticles. A comprehensive characterization was conducted to assess surface modifications and analyze chemical and structural changes. X-ray photoelectron spectroscopy (XPS) showed the presence of silver on the MoS2 surface. Scanning electron microscopy (SEM) confirmed successful decoration with silver nanoparticles, showing that deposition time affects the size and distribution of the silver on the MoS2 surface.

Large area CVD-grown vertically and horizontally oriented MoS2 nanostructures as SERS biosensors for single molecule detection

Surface-enhanced Raman scattering (SERS) has attracted extensive attention for its rapid, ultra-sensitive, non-destructive and label-free fingerprint detection of trace molecules. Recently, two-dimensional transition metal dichalcogenides have been investigated as SERS substrates owing to their low cost, simple synthesis, excellent optical behavior, tunable bandgap, high carrier mobility and good biocompatibility. Here, we have synthesized 2H-MoS2 nanostructures of different morphologies (vertically and horizontally oriented) via the chemical vapor deposition (CVD) method on different substrates (FTO-coated glass, Si and SiO2-Si) and utilized them as SERS substrates for the detection of bilirubin and vitamin B12 biomolecules. The strong vibronic coupling within the charge transfer (CT) process leads to photo-induced charge transfer (PICT) resonance, showing enhanced SERS activity. This CT mechanism is further confirmed by observing quenching of the room temperature PL spectra and enhanced SERS signals of biomolecules over SERS substrates. To the best of our knowledge, the detection limit in this work (10-11 M for bilirubin and 10-8 M for vitamin B12) is considerably higher than previously reported values. The improved efficiency of the PICT process can be achieved at low temperature, and this is confirmed when performing low temperature-dependent photoluminescence (PL) studies on SERS substrates. Furthermore, we also demonstrated enhanced SERS activity at low temperature on CVD-grown pristine MoS2 films over different substrates for biomolecule detection for the first time, attributing this activity to the enhanced PICT process at low temperature.

Towards Low-Temperature CVD Synthesis and Characterization of Mono- or Few-Layer Molybdenum Disulfide

Molybdenum disulfide (MoS2) transistors are a promising alternative for the semiconductor industry due to their large on/off current ratio (>1010), immunity to short-channel effects, and unique switching characteristics. MoS2 has drawn considerable interest due to its intriguing electrical, optical, sensing, and catalytic properties. Monolayer MoS2 is a semiconducting material with a direct band gap of ~1.9 eV, which can be tuned. Commercially, the aim of synthesizing a novel material is to grow high-quality samples over a large area and at a low cost. Although chemical vapor deposition (CVD) growth techniques are associated with a low-cost pathway and large-area material growth, a drawback concerns meeting the high crystalline quality required for nanoelectronic and optoelectronic applications. This research presents a lower-temperature CVD for the repeatable synthesis of large-size mono- or few-layer MoS2 using the direct vapor phase sulfurization of MoO3. The samples grown on Si/SiO2 substrates demonstrate a uniform single-crystalline quality in Raman spectroscopy, photoluminescence (PL), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy. These characterization techniques were targeted to confirm the uniform thickness, stoichiometry, and lattice spacing of the MoS2 layers. The MoS2 crystals were deposited over the entire surface of the sample substrate. With a detailed discussion of the CVD setup and an explanation of the process parameters that influence nucleation and growth, this work opens a new platform for the repeatable synthesis of highly crystalline mono- or few-layer MoS2 suitable for optoelectronic application.

Recent Progress in Nanotechnology-Based Approaches for Food Monitoring

Throughout the food supply chain, including production, storage, and distribution, food can be contaminated by harmful chemicals and microorganisms, resulting in a severe threat to human health. In recent years, the rapid advancement and development of nanotechnology proposed revolutionary solutions to solve several problems in scientific and industrial areas, including food monitoring. Nanotechnology can be incorporated into chemical and biological sensors to improve analytical performance, such as response time, sensitivity, selectivity, reliability, and accuracy. Based on the characteristics of the contaminants and the detection methods, nanotechnology can be applied in different ways in order to improve conventional techniques. Nanomaterials such as nanoparticles, nanorods, nanosheets, nanocomposites, nanotubes, and nanowires provide various functions for the immobilization and labeling of contaminants in electrochemical and optical detection. This review summarizes the recent advances in nanotechnology for detecting chemical and biological contaminations in the food supply chain.