Effective Droplet Size Reduction and Excellent Stability of Limonene Nanoemulsion Formed by High-Pressure Homogenizer

Therapeutic potential of limonene-based syringic acid nanoemulsion: Enhanced ex-vivo cutaneous deposition and clinical anti-psoriatic efficacy

Nanoemulsions have carved their position in topical delivery owing to their peculiar features of forming a uniform film on the skin and conquering stratum corneum barrier and hence fostering dermal penetration and retention. The present work developed syringic acid nanoemulsion (SA-NE) by spontaneous emulsification as an anti-psoriatic remedy via the dermal route. SA-NE were prepared with either lauroglycol90, limonene or their combination (oil phase) and tween80 (surfactant) with variable concentrations. The physicochemical characteristics of SA-NE were assessed together with Ex-vivo skin deposition and dermal toxicity. The effectiveness of optimal formula in psoriatic animal model and psoriatic patients was investigated using PASI scoring and dermoscope examination. Results showed that, SA-NE containing mixture of lauroglycol 90, limonene and 10 % tween80 (F5), was selected as the optimal formula presenting stable nanoemulsion for 2-month period, showing droplet size of 177.6 ± 13.23 nm, polydispersity index of 0.16 ± 0.06, zeta potential of -21.23 ± 0.41 mV. High SA% in different skin strata and no dermal irritation was noticed with limonene-based SA-NE also it showed high in-vitro anti- inflammatory potential compared to the blank and control formulations. A preclinical study demonstrated that limonene-based SA-NE is effective in alleviating psoriasis-like skin lesions against imiquimod-induced psoriasis in rats. Clinically, promising anti-psoriatic potential was asserted as all patients receiving F5 experienced better clinical improvement and response to therapy, achieving ≥ 50 % reduction in PASI scores versus only 35 % responders in the Dermovate® cream group. Collectively, the practical feasibility of limonene-based SA-NE topical delivery can boost curative functionality in the treatment of psoriatic lesions.

Sources, colloidal characteristics, and separation technologies for highly hazardous waste nanoemulsions

Nanoemulsions play a crucial role in various industries. However, their application often results in hazardous waste, posing significant risks to human health and the environment. Effective management and separation of waste nanoemulsions requires special attention and effort. This review provides a comprehensive understanding of waste nanoemulsions, covering their sources, characteristics, and suitable treatment technologies, intending to mitigate their environmental impact. This study examines the evolution of nanoemulsions from beneficial products to hazardous wastes, provides an overview of the production processes, fate, and hazards of waste nanoemulsions, and highlights the critical characteristics that affect their stability. The latest advancements in separating waste nanoemulsions for recovering oil and reusable water resources are also presented, providing a comprehensive comparison and evaluation of the current treatment techniques. This review addresses the significant challenges in nanoemulsion treatment, provides insights into future research directions, and offers valuable implications for the development of more effective strategies to mitigate the hazards associated with waste nanoemulsions.

Effect of dynamic high-pressure treatments on the multi-level structure of starch macromolecule and their techno-functional properties: A review

Over the past decades, dynamic high-pressure treatment (DHPT) executed by high-pressure homogenization (HPH) or microfluidization (DHPM) technology has received humongous research attention for starch macromolecule modification. However, the studies on starch multi-level structure alterations by DHPT have received inadequate attention. Furthermore, no review comprehensively covers all aspects of DHPT, explicitly addressing the combined effects of both technologies (HPH or DHPM) on starch's structural and functional characteristics. Hence, this review focused on recent advancements concerning the influences of DHPT on the starch multi-level structure and techno-functional properties. Intense mechanical actions induced by DHPT, such as high shear and impact forces, hydrodynamic cavitation, instantaneous pressure drops, and turbulence, altered the multi-level structure of starch for a short duration. The DHPT reduces the starch molecular weight and degree of branching, destroys short-range ordered and long-range crystalline structure, and degrades lamellar structure, resulting in partial gelatinization of starch granules. These structural changes influenced their techno-functional properties like swelling power and solubility, freeze-thaw stability, emulsifying properties, retrogradation rate, thermal properties, rheological and pasting, and digestibility. Processing conditions such as pressure level, the number of passes, inlet temperature, chamber geometry used, starch types, and their concentration may influence the above changes. Moreover, dynamic high-pressure treatment could form starch-fatty acids/polyphenol complexes. Finally, we discuss the food system applications of DHPT-treated starches and flours, and some limitations.

Bioactive properties of clove (Syzygium aromaticum) essential oil nanoemulsion: A comprehensive review

Syzygium aromaticum, commonly called clove, is a culinary spice with medical uses. Clove is utilized in cosmetics, medicine, gastronomy, and agriculture due to its abundance of bioactive components such as gallic acid, flavonoids, eugenol acetate, and eugenol. Clove essential oil has been revealed to have antibacterial, antinociceptive, antibacterial activities, antifungal, and anticancerous qualities. Anti-inflammatory chemicals, including eugenol and flavonoids, are found in clove that help decrease inflammation and alleviate pain. The anti-inflammatory and analgesic qualities of clove oil have made it a popular natural cure for toothaches and gum discomfort. Due to its therapeutic potential, it has been used as a bioactive ingredient in coating fresh fruits and vegetables. This review article outlines the potential food processing applications of clove essential oil. The chemical structures of components, bioactive properties, and medicinal potential of clove essential oil, including phytochemical importance in food, have also been thoroughly addressed.

The Fatty Acid Compositions, Irritation Properties, and Potential Applications of Teleogryllus mitratus Oil in Nanoemulsion Development

This study aimed to characterize and investigate the potential of the oils from Gryllus bimaculatus, Teleogryllus mitratus, and Acheta domesticus to be used in nanoemulsions. The oils were extracted by a cold press method and characterized for their fatty acid profiles. Their irritation effects on the chorioallantoic membrane (CAM) were evaluated, along with investigations of solubility and the required hydrophilic-lipophilic balance (RHLB). Various parameters impacting nanoemulsion generation using high-pressure homogenization were investigated. The findings revealed that G. bimaculatus yielded the highest oil content (24.58% w/w), followed by T. mitratus (20.96% w/w) and A. domesticus (15.46% w/w). Their major fatty acids were palmitic, oleic, and linoleic acids. All oils showed no irritation, suggesting safety for topical use. The RHLB values of each oil were around six-seven. However, they could be successfully developed into nanoemulsions using various surfactants. All cricket oils could be used for the nanoemulsion preparation, but T. mitratus yielded the smallest internal droplet size with acceptable PDI and zeta potential. Nanoemulsion was found to significantly enhance the antioxidant and anti-skin wrinkle of the T. mitratus oil. These findings pointed to the possible use of cricket oils in nanoemulsions, which could be used in various applications, including topical and cosmetic formulations.

The Effect of High-Pressure Homogenization Conditions on the Physicochemical Properties and Stability of Designed Fluconazole-Loaded Ocular Nanoemulsions

The growing interest in high-energy emulsification is a result of its scalability, which is important from an industrial perspective and allows for a more reproducible and efficient production of pharmaceutical formulations. The aim of this study was to evaluate the effect of composition, mainly a fixed surfactant/cosurfactant (Smix) ratio, their concentration, and the parameters of high-pressure homogenization (HPH) processing on the quality and stability of ophthalmic fluconazole-loaded nanoemulsions. After a physicochemical analysis of nanoemulsions containing 20% w/w of oil, as optimal conditions for the HPH process, three cycles at a pressure of 1000 bar were established, obtaining formulations with an average droplet diameter size in the range of 80.63-129.68 nm and PDI values below 0.25. While it was expected that an increasing cosurfactant concentration decreased the droplet size, in the case of formulations containing Tween 20 and 10% w/w of cosurfactants, "over-processing" was observed, identified by the droplet size and polydispersity index increase. Consecutively, the selected formulations were evaluated for in vitro drug release in Franz's cell, antifungal activity, and 30-day stability using NMR spectroscopy. An antifungal activity test showed no significant difference in the antifungal activity between optimal fluconazole-loaded nanoemulsions and a 0.3% aqueous drug solution, but previously, research showed that prepared formulations were characterized by a higher viscosity and satisfactory prolonged release compared to a control. In a 30-day stability study, it was observed that higher HLB values of the used surfactants decreased the stability of the formulations in the following order: Kolliphor EL, Tween 80, Tween 20. The NMR spectra confirmed that Kolliphor EL-based formulations ensured the higher stability of the nanoemulsion composition in comparison to Tween 80 and a better stabilizing effect of propylene glycol as a cosurfactant in comparison to PEG 200. Therefore, the optimization of HPH technology should be focused on the selection of Smix and the Smix:oil ratio in order to prepare stable formulations of high quality.

Lomustine's nanoemulsion as nose-to-brain drug delivery system for CNS tumor treatment

Nose-to-brain delivery allows the direct targeting of drug molecules bypassing the Blood Brain Barrier and systemic effect. Nanoemulsion is one of the novel strategies to deliver drug in this route due to its simplicity in manufacturing, long-term stability, and strong solubilization property for drug. The anticancer drug lomustine had poor oral bioavailability in addition to its serious side effect, therefore, developing more effective drug delivery with direct targeting towards the brain through intra-nasal administration applying nanoemulsion technology is a promising alternative. The work involved lomustine solubility screening in oils, surfactants and cosurfactants as well as emulsifier ratio (Smix) nanoemulsion area was identified using pseudo-ternary phase diagrams. Eighteen nanoemulsion formulas were produced for optimization, then characterized for droplet size, polydispersity index, zeta potential, entrapment efficiency, conductivity, transmittance, dilution, visual transparency, physical stability and in vitro release. The optimum NE formula showed droplet size, zeta potential, polydispersity index, entrapment efficiency, %transmittance, conductivity of 31.31 nm, -30.65 mV, 0.159, 98.12%, 99.08%, and 951 us/cm, respectively. The best formula released 100% lomustine within 15 min which is a promising potential drug delivery system that may deliver the drug quickly and directly to the brain as a safe and effective alternative to oral delivery.

Curcumin: Overview of Extraction Methods, Health Benefits, and Encapsulation and Delivery Using Microemulsions and Nanoemulsions

Curcumin is the principal curcuminoid found in the rhizomes of turmeric. Due to its therapeutic action against cancer, depression, diabetes, some bacteria, and oxidative stress, it has been used widely in medicine since ancient times. Due to its low solubility, the human organism cannot completely absorb it. Advanced extraction technologies, followed by encapsulation in microemulsion and nanoemulsion systems, are currently being used to improve bioavailability. This review discusses the different methods available for curcumin extraction from plant material, methods for the identification of curcumin in the resulting extracts, its beneficial effects on human health, and the encapsulation techniques into small colloidal systems that have been used over the past decade to deliver this compound.

Advances and trends in encapsulation of essential oils

There is a huge concern regarding the potential carcinogenic and mutagenic risks associated with the usage of synthetic chemicals as preservatives in various consumer products such as food and pharmaceutical formulations. In this aspect, there is a need for the development of alternative natural preservatives to replace these synthetic chemicals. More recently, naturally occurring essential oils have emerged as popular ingredients owing to their unique characteristics like antioxidant and antimicrobial activity, to enrich and enhance the functional properties of consumer products. However, due to their high volatility and hydrophobicity, their functionality is lost and their incorporation in aqueous products is challenging. One of the promising strategies to overcome this challenge is encapsulation which involves the entrapment of the essential oil inside a biocompatible material for its controlled release and increased bioavailability. Also, the choice of encapsulation method depends on the component to be encapsulated and the shell material. In this review, encapsulation in various colloidal systems that facilitate the potential delivery of essential oils is discussed. The focus is on encapsulation techniques along with their advantages and disadvantages, encapsulation efficiency, and in vitro release studies.

Impact of Operating Parameters on the Production of Nanoemulsions Using a High-Pressure Homogenizer with Flow Pattern and Back Pressure Control

The main objective of this study was to establish the relative importance of the main operating parameters impacting the formation of food-grade oil-in-water nanoemulsions by high-pressure homogenization. The goal of this unit operation was to create uniform and stable emulsified products with small mean particle diameters and narrow polydispersity indices. In this study, we examined the performance of a new commercial high-pressure valve homogenizer, which has several features that provide good control over the particle size distribution of nanoemulsions, including variable homogenization pressures (up to 45,000 psi), nozzle dimensions (0.13/0.22 mm), flow patterns (parallel/reverse), and back pressures. The impact of homogenization pressure, number of passes, flow pattern, nozzle dimensions, back pressure, oil concentration, emulsifier concentration, and emulsifier type on the particle size distribution of corn oil-in-water emulsions was systematically examined. The droplet size decreased with increasing homogenization pressure, number of passes, back pressure, and emulsifier-to-oil ratio. Moreover, it was slightly smaller when a reverse rather than parallel flow profile was used. The emulsifying performance of plant, animal, and synthetic emulsifiers was compared because there is increasing interest in replacing animal and synthetic emulsifiers with plant-based ones in the food industry. Under fixed homogenization conditions, the mean particle diameter decreased in the following order: gum arabic (0.66 µm) > soy protein (0.18 µm) > whey protein (0.14 µm) ≈ Tween 20 (0.14 µm). The information reported in this study is useful for the optimization of the production of food-grade nanoemulsions using high-pressure homogenization.

Formulation and Characterization of a Novel Palm-Oil-Based α-Mangostin Nano-Emulsion (PO-AMNE) as an Antimicrobial Endodontic Irrigant: An In Vitro Study

Aim: To formulate and characterize a palm-oil-in-water-based α-Mangostin nano-emulsion (PO-AMNE) endodontic irrigant, in order to evaluate its antibacterial efficacy against Enterococcus faecalis, Staphylococcus epidermidis, and Candida albicans biofilms, as well as its capacity to remove smear layer. Methods: The solubility of α-Mangostin in various oils was determined and selected, surfactants and co-surfactants were used for the nano-emulsion trial. PO-AMNE was prepared and optimized. The MIC was performed, and the antimicrobial efficacy was estimated against biofilms. The optimized 0.2% PO-AMNE irrigant antimicrobial efficacy in a tooth model was done using colony-forming units. The treated teeth were processed by scanning electron microscopic examination for debris and smear layer removal. An Alamar Blue assay was used to evaluate cell viability. The optimization of the PO-AMNE irrigant was performed using Box–Behnken statistical design. Results: The optimized 0.2% PO-AMNE irrigant was found to have a particle size of 340.9 nm with 0.246 PDI of the dispersed droplets, and a zeta potential (mV) of −27.2 ± 0.7 mV. The MIC values showed that 0.2% PO-AMNE (1.22 ± 0.02) were comparable to 2% CHX (1.33 ± 0.01), and 3.25% NaOCl (2.2 ± 0.09) had the least inhibition for E. faecalis. NaOCl (3.25%) showed the maximum inhibition of S. epidermidis (0.26 ± 0.05), whereas 0.2% PO-AMNE (1.25 ± 0.0) was comparable to 2% CHX (1.86 ± 0.07). For C. albicans, 2% CHX (8.12 ± 0.12) showed the least inhibition as compared to 0.2% PO-AMNE (1.23 ± 0.02) and 3.25% NaOCl (0.59 ± 0.02). The 0.2% PO-AMNE irrigant was then evaluated for its antimicrobial efficacy against the three biofilms, using colony-forming units. The 0.2% PO-AMNE was comparable to both 3.25% NaOCl and 2% CHX in inhibiting the growth of biofilms. The 0.2% PO-AMNE and 17% EDTA eliminated the smear layer with the lowest mean scores (p < 0.001). Finally, 0.2% PO-AMNE was shown to be biocompatible when compared to 17% EDTA, 3.25% NaOCl, and 2% CHX in immortalized oral keratinocyte cells. Conclusion: Overall, the formulated 0.2% PO-AMNE irrigant was an effective antimicrobial and biocompatible which could combat endodontic-infection-related polymicrobial biofilms.

Microflow of nanoemulsion threads in surfactant solutions

We experimentally investigate the microfluidic flow of oil-in-water nanoemulsions in aqueous sodium dodecyl sulfate (SDS) solutions having different concentrations and injection flow rates. A coaxial microfluidic device is employed to explore the behavior of nanoemulsion threads in these sheathing SDS solutions. Using two high-speed cameras, which simultaneously capture both top and side views, we reveal a variety of flow phenomena, ranging from simple core-annular flow to complex flows, such as gravitational, inertial, and buckling thread flows. By analyzing these complex flows, we develop a methodology that elucidates the relationship of core-annular and gravitational flows at low flow rates. Further, we examine the off-axis displacements and bending of core threads at large flow rates, and we study the buckling dynamics of nanoemulsion threads subjected to osmotic stresses caused by large SDS concentrations in the sheathing fluid.

Deciphering the Emulsification Process to Create an Albumin-Perfluorocarbon-(o/w) Nanoemulsion with High Shelf Life and Bioresistivity

This work aimed at the development of a stable albumin-perfluorocarbon (o/w) emulsion as an artificial oxygen carrier suitable for clinical application. So far, albumin-perfluorocarbon-(o/w) emulsions have been successfully applied in preclinical trials. Cross-linking a variety of different physical and chemical methods for the characterization of an albumin-perfluorocarbon (PFC)-(o/w) emulsion was necessary to gain a deep understanding of its specific emulsification processes during high-pressure homogenization. High-pressure homogenization is simple but incorporates complex physical reactions, with many factors influencing the formation of PFC droplets and their coating. This work describes and interprets the impact of albumin concentration, homogenization pressure, and repeated microfluidizer passages on PFC-droplet formation; its influence on storage stability; and the overcoming of obstacles in preparing stable nanoemulsions. The applied methods comprise dynamic light scattering, static light scattering, cryo- and non-cryo-scanning and transmission electron microscopies, nuclear magnetic resonance spectroscopy, light microscopy, amperometric oxygen measurements, and biochemical methods. The use of this wide range of methods provided a sufficiently comprehensive picture of this polydisperse emulsion. Optimization of PFC-droplet formation by means of temperature and pressure gradients results in an emulsion with improved storage stability (tested up to 5 months) that possibly qualifies for clinical applications. Adaptations in the manufacturing process strikingly changed the physical properties of the emulsion but did not affect its oxygen capacity.

The Impact of the Oil Phase Selection on Physicochemical Properties, Long-Term Stability, In Vitro Performance and Injectability of Curcumin-Loaded PEGylated Nanoemulsions

A nanotechnology-based approach to drug delivery presents one of the biggest trends in biomedical science that can provide increased active concentration, bioavailability, and safety compared to conventional drug-delivery systems. Nanoemulsions stand out amongst other nanocarriers for being biodegradable, biocompatible, and relatively easy to manufacture. For improved drug-delivery properties, longer circulation for the nanoemulsion droplets should be provided, to allow the active to reach the target site. One of the strategies used for this purpose is PEGylation. The aim of this research was assessing the impact of the oil phase selection, soybean or fish oil mixtures with medium chain triglycerides, on the physicochemical characteristics and injectability of curcumin-loaded PEGylated nanoemulsions. Electron paramagnetic resonance spectroscopy demonstrated the structural impact of the oil phase on the stabilizing layer of nanoemulsions, with a more pronounced stabilizing effect of curcumin observed in the fish oil nanoemulsion compared to the soybean oil one. The design of the experiment study, employed to simultaneously assess the impact of the oil phase, different PEGylated phospholipids and their concentrations, as well as the presence of curcumin, showed that not only the investigated factors alone, but also their interactions, had a significant influence on the critical quality attributes of the PEGylated nanoemulsions. Detailed physicochemical characterization of the NEs found all formulations were appropriate for parenteral administration and remained stable during two years of storage, with the preserved antioxidant activity demonstrated by DPPH and FRAP assays. In vitro release studies showed a more pronounced release of curcumin from the fish oil NEs compared to that from the soybean oil ones. The innovative in vitro injectability assessment, designed to mimic intravenous application, proved that all formulations tested in selected experimental setting could be employed in prospective in vivo studies. Overall, the current study shows the importance of oil phase selection when formulating PEGylated nanoemulsions.

Thermosensitive Hydrogels Loaded with Resveratrol Nanoemulsion: Formulation Optimization by Central Composite Design and Evaluation in MCF-7 Human Breast Cancer Cell Lines

The second most common cause of mortality among women is breast cancer. A variety of natural compounds have been demonstrated to be beneficial in the management of various malignancies. Resveratrol is a promising anticancer polyphenolic compound found in grapes, berries, etc. Nevertheless, its low solubility, and hence its low bioavailability, restrict its therapeutic potential. Therefore, in our study, we developed a thermosensitive hydrogel formulation loaded with resveratrol nanoemulsion to enhance its bioavailability. Initially, resveratrol nanoemulsions were formulated and optimized utilizing a central composite-face-centered design. The independent variables for optimization were surfactant level, homogenization speed, and time, while the size and zeta potential were the dependent variables. The optimized nanoemulsion formulation was converted into a sensitive hydrogel using poloxamer 407. Rheological studies proved the formation of gel consistency at physiological temperature. Drug loading efficiency and in vitro drug release from gels were also analyzed. The drug release mechanisms from the gels were assessed using various mathematical models. The effect of the optimized thermosensitive resveratrol nanoemulsion hydrogel on the viability of human breast cancer cells was tested using MCF-7 cancer cell lines. The globule size of the selected formulation was 111.54 ± 4.16 nm, with a zeta potential of 40.96 ± 3.1 mV. Within 6 h, the in vitro release profile demonstrated a release rate of 80%. According to cell line studies, the produced hydrogel of resveratrol nanoemulsion was cytotoxic to breast cancer cells. Overall, the results proved the developed nanoemulsion-loaded thermosensitive hydrogel is a promising platform for the effective delivery of resveratrol for the management of breast cancer.

Lipid Nanoparticles as a Promising Drug Delivery Carrier for Topical Ocular Therapy-An Overview on Recent Advances

Due to complicated anatomical and physical properties, targeted drug delivery to ocular tissues continues to be a key challenge for formulation scientists. Various attempts are currently being made to improve the in vivo performance of therapeutic molecules by encapsulating them in various nanocarrier systems or devices and administering them via invasive/non-invasive or minimally invasive drug administration methods. Biocompatible and biodegradable lipid nanoparticles have emerged as a potential alternative to conventional ocular drug delivery systems to overcome various ocular barriers. Lipid-based nanocarrier systems led to major technological advancements and therapeutic advantages during the last few decades of ocular therapy, such as high precorneal residence time, sustained drug release profile, minimum dosing frequency, decreased drug toxicity, targeted site delivery, and, therefore, an improvement in ocular bioavailability. In addition, such formulations can be given as fine dispersion in patient-friendly droppable preparation without causing blurred vision and ocular sensitivity reactions. The unique advantages of lipid nanoparticles, namely, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, and liposomes in intraocular targeted administration of various therapeutic drugs are extensively discussed. Ongoing and completed clinical trials of various liposome-based formulations and various characterization techniques designed for nanoemulsion in ocular delivery are tabulated. This review also describes diverse solid lipid nanoparticle preparation methods, procedures, advantages, and limitations. Functionalization approaches to overcome the drawbacks of lipid nanoparticles, as well as the exploration of new functional additives with the potential to improve the penetration of macromolecular pharmaceuticals, would quickly progress the challenging field of ocular drug delivery systems.

Continuous production of nanoemulsion for skincare product using a 3D-printed rotor-stator hydrodynamic cavitation reactor

In this study, nanoemulsions for skincare products were continuously produced using a hydrodynamic cavitation reactor (HCR) designed with a rotor and stator. The key component of this research is the utilization of a 3D-printed rotor in a HCR for the production of an oil-in-water nanoemulsion. Response surface methodology was used to determine the process conditions, such as speed of the rotor, flow rate, as well as, Span60, Tween60, and mineral oil concentrations, for generating the optimal droplet size in the nanoemulsion. The results showed that a droplet size of 366.4 nm was achieved under the recommended conditions of rotor speed of 3500 rpm, flow rate of 3.3 L/h, Span60 concentration of 2.36 wt%, Tween60 concentration of 3.00 wt%, and mineral oil concentration of 1.76 wt%. Moreover, the important characteristics for consideration in skincare products, such as polydispersity index, pH, zeta potential, viscosity, stability, and niacin released from formulations, were also assessed. For the niacin release profile of emulsion and nanoemulsion formulations, different methods, such as magnetic stirring, ultrasound, and hydrodynamic cavitation, were compared. The nanoemulsion formulations provided a greater cumulative release from the formulation than the emulsion. Particularly, the nanoemulsion generated using the HCR provided the largest cumulative release from the formulation after 12 h. Therefore, the present study suggests that nanoemulsions can be created by means of hydrodynamic cavitation, which reduces the droplet size, as compared to that generated using other techniques. The satisfactory results of this study indicate that the rotor-stator-type HCR is a potentially cost-effective technology for nanoemulsion production.

Synergic Antitumor Effect of Photodynamic Therapy and Chemotherapy Mediated by Nano Drug Delivery Systems

This review provides a summary of recent progress in the development of different nano-platforms for the efficient synergistic effect between photodynamic therapy and chemotherapy. In particular, this review focuses on various methods in which photosensitizers and chemotherapeutic agents are co-delivered to the targeted tumor site. In many cases, the photosensitizers act as drug carriers, but this review, also covers different types of appropriate nanocarriers that aid in the delivery of photosensitizers to the tumor site. These nanocarriers include transition metal, silica and graphene-based materials, liposomes, dendrimers, polymers, metal–organic frameworks, nano emulsions, and biologically derived nanocarriers. Many studies have demonstrated various benefits from using these nanocarriers including enhanced water solubility, stability, longer circulation times, and higher accumulation of therapeutic agents/photosensitizers at tumor sites. This review also describes novel approaches from different research groups that utilize various targeting strategies to increase treatment efficacy through simultaneous photodynamic therapy and chemotherapy.

Nanoemulsified Carvacrol as a Novel Washing Treatment Reduces Escherichia coli O157:H7 on Spinach and Lettuce

ABSTRACT

Fresh produce continues to be the main source of foodborne illness outbreaks in the United States, implicating bacterial pathogens such as Escherichia coli O157:H7 (EHEC). The efficacy of nanoemulsified carvacrol (NCR) as a washing treatment in reducing EHEC on fresh produce was investigated. Fresh baby spinach, romaine lettuce, and iceberg lettuce leaves (2.5-cm-diameter cores) were spot inoculated with a five-strain cocktail of nalidixic acid-resistant EHEC at ∼6 log CFU/cm2. After air drying for 1 h, 20 pieces of each inoculated produce leaf were immersed in water-based treatment solutions (200 mL per group), including water alone, 25 or 50 ppm of free chlorine, and 0.25 or 0.75% NCR for 2 min. Inoculated produce leaves without any treatment served as baseline. Produce leaves were stored at 10°C, and surviving EHEC populations were enumerated on days 0, 2, 7, and 14. The viability of EHEC following NCR treatments on the fresh produce was visualized under a fluorescence microscope. NCR treatment at 0.75% immediately reduced EHEC populations on iceberg lettuce by 1.3 log CFU/cm2 as compared with the produce treated with water alone (P < 0.05). Antimicrobial activity of NCR against EHEC was comparable to chlorine treatments on day 0 for all produce (P > 0.05). After 14 days of storage at 10°C, populations of EHEC on 0.75% NCR-treated romaine lettuce were reduced by 2.3 log CFU/cm2 compared with the recovery from 50 ppm of chlorine-treated samples (P < 0.05). Microscopic images revealed that EHEC cells were observed to be clustered on the baseline samples, indicating the development of cell aggregation, compared with the scattered cells seen on NCR-treated leaf surfaces. Treatments with NCR did not significantly affect the color of the fresh produce leaves during 14 days of storage at 10°C. Results of this study support the potential use of NCR as a water-soluble natural antimicrobial wash treatment for controlling EHEC on fresh produce.

HIGHLIGHTS

Chitosan-Coated 5-Fluorouracil Incorporated Emulsions as Transdermal Drug Delivery Matrices

The purpose of the present study was to develop emulsions encapsulated by chitosan on the outer surface of a nano droplet containing 5-fluorouracil (5-FU) as a model drug. The emulsions were characterized in terms of size, pH and viscosity and were evaluated for their physicochemical properties such as drug release and skin permeation in vitro. The emulsions containing tween 80 (T80), sodium lauryl sulfate, span 20, and a combination of polyethylene glycol (PEG) and T20 exhibited a release of 88%, 86%, 90% and 92%, respectively. Chitosan-modified emulsions considerably controlled the release of 5-FU compared to a 5-FU solution (p < 0.05). All the formulations enabled transportation of 5-FU through a rat's skin. The combination (T80, PEG) formulation showed a good penetration profile. Different surfactants showed variable degrees of skin drug retention. The ATR-FTIR spectrograms revealed that the emulsions mainly affected the fluidization of lipids and proteins of the stratum corneum (SC) that lead to enhanced drug permeation and retention across the skin. The present study concludes that the emulsions containing a combination of surfactants (Tween) and a co-surfactant (PEG) exhibited the best penetration profile, prevented the premature release of drugs from the nano droplet, enhanced the permeation and the retention of the drug across the skin and had great potential for transdermal drug delivery. Therefore, chitosan-coated 5-FU emulsions represent an excellent possibility to deliver a model drug as a transdermal delivery system.

A High Throughput Approach Based on Dynamic High Pressure for the Encapsulation of Active Compounds in Exosomes for Precision Medicine

In recent decades, endogenous nanocarrier-exosomes have received considerable scientific interest as drug delivery systems. The unique proteo-lipid architecture allows the crossing of various natural barriers and protects exosomes cargo from degradation in the bloodstream. However, the presence of this bilayer membrane as well as their endogenous content make loading of exogenous molecules challenging. In the present work, we will investigate how to promote the manipulation of vesicles curvature by a high-pressure microfluidic system as a ground-breaking method for exosomes encapsulation. Exosomes isolated from Uppsala 87 Malignant Glioma (U87-MG) cell culture media were characterized before and after the treatment with high-pressure homogenization. Once their structural and biological stability were validated, we applied this novel method for the encapsulation in the lipidic exosomal bilayer of the chemotherapeutic Irinotecan HCl Trihydrate-CPT 11. Finally, we performed in vitro preliminary test to validate the nanobiointeraction of exosomes, uptake mechanisms, and cytotoxic effect in cell culture model.

Optimisation of Stingless Bee Honey Nanoemulsions Using Response Surface Methodology

Nanoemulsions (NEs) have been used in a wide range of products, such as those produced by the food, cosmetics, and pharmaceutical industries, due to their stability and long shelf life. In the present study, stingless bee honey (SBH) NEs were formulated using SBH, oleic acid, tween 80, glycerol, and double-distilled water. SBH NEs were prepared using a high-pressure homogeniser and were characterised by observing their stability and droplet size. Fourier Transform-Infrared (FTIR) analysis was used to observe the functional groups of the SBH NEs after being subjected to high-pressure homogenisation. Transmission Electron Microscopy (TEM) images were then used to confirm the particle size of the SBH NEs and to investigate their morphology. The effects of the independent variables (percentage of oleic acid, storage time, and storage temperature) on the response variables (particle size and polydispersity index) were investigated using the response surface methodology, along with a three-level factorial design. The results showed that the models developed via the response surface methodology were reliable, with a coefficient of determination (R²) of more than 0.90. The experimental validation indicated an error of less than 10% in the actual results compared to the predicted results. The FTIR analysis showed that SBH NEs have the same functional group as SBH. Observation through TEM indicated that the SBH NEs had a similar particle size, which was between 10 and 100 nm. Thus, this study shows that SBH NEs can be developed using a high-pressure homogeniser, which indicates a new direction for SBH by-products.

Opening a new gateway towards the applications of chitosan nanoparticles stabilized Pickering emulsion in the realm of aquaculture

In the current study, we synthesized eugenol (EU) based Pickering emulsion (PE) stabilized by food grade ingredients such as chitosan (CS) and tripolyphosphate (TPP) not only to enhance water miscibility of EU but also to decrease stress and damage to the immune system of fish due to anesthetic procedures. The formulated EUPEs were characterized in terms of droplet size, size distribution and the effects of environmental conditions e.g. pH and temperature on the behavior of the EUPEs. The results showed that EU PEs with 5% EU had smaller size with uniform distribution and were stable in the range of pH 5-7.5 and temperature 30-80 °C. The anesthetic effect of the EUPE was investigated by taking Common carp as a sample species. Interestingly, it was found that the induction time to anesthesia and recovery for the fish that received the PE was significantly shorter than that received EU at the same eugenol concentration (50 ppm). Most importantly, the improved hematological and bio-chemical parameters in the PE group further confirmed the immuno-protective and stress control efficacy of the PE. The results of this study propose a novel useful and potential application of PE in fishery where sedation is needed.

Cationic zinc (II) phthalocyanine nanoemulsions for photodynamic inactivation of resistant bacterial strains

BACKGROUND

The growing emergence of microbial resistance to antibiotics represents a worldwide challenge. Antimicrobial photodynamic inactivation (aPDI) has been introduced as an alternative technique, especially when combined with nanotechnology. Therefore, this study was designed to investigate the therapeutic merits of combined aPDI and nanoemulsion in infections caused by resistant bacterial strains.

METHODS

Cationic zinc (II) phthalocyanine nanoemulsions (ZnPc-NE) were prepared using isopropyl myristate (IPM) as oil phase, egg phosphatidylcholine (egg PC) as emulsifier, and N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB). Nanoemulsions were characterized for particle size, polydispersity, zeta potential, viscosity, and skin deposition. The in-vitro aPDI was investigated on human resistant pathogens; gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and gram-negative Multidrug-resistant strain of Escherichia coli (MDR E. coli), under different experimental conditions. In addition, in-vivo model of abrasion wound infected by MDR E. coli was induced in rats to investigate the therapeutic potential of the selected formulation.

RESULTS

It was evident that the selected ZnPc formulation (20 % IPM, 2 % egg PC and 0.5 % CTAB) displayed a particle size of 209.9 nm, zeta potential +73.1 mV, and 23.66 % deposition of ZnPc in skin layers. Furthermore, the selected formulation combined with light achieved almost 100 % eradication of the two bacterial strains, with superior bacterial load reduction and wound healing propertiesin-vivo, compared to either the nanoemulsion formulation or laser alone.

CONCLUSION

ZnPc nanoemulsion improved antimicrobial photodynamic therapy in inactivating resistant bacterial infections and provided a promising therapeutic means of treating serious infections, and hence could be applied in diseases caused by other bacterial strains.

Development and Optimization of Naringenin-Loaded Chitosan-Coated Nanoemulsion for Topical Therapy in Wound Healing

The potential role of naringenin (NAR), a natural flavonoid, in the treatment of chronic wound has prompted the present research to deliver the drug in nanoemulsion (NE) form, where synergistic role of chitosan was achieved through development of chitosan-coated NAR NE (CNNE). The NE consisted of Capryol 90, Tween 20 and Transcutol P, which was fabricated by low-energy emulsification method to encapsulate NAR within the oil core. The optimization of the formulated NEs was performed using Box-Behnken statistical design to obtain crucial variable parameters that influence globule size, size distribution and surface charge. Finally, the optimized formulation was coated with different concentrations of chitosan and subsequently characterized in vitro. The size of the CNNE was found to be increased when the drug-loaded formulation was coated with chitosan. Controlled release characteristics depicted 67-81% release of NAR from the CNNE, compared to 89% from the NE formulation. Cytotoxicity study of the formulation was performed in vitro using fibroblast cell line (NIH-3T3), where no inhibition in proliferation of the cells was observed with CNNE. Finally, the wound healing potential of the CNNE was evaluated in an abrasion-created wound model in experimental animals where the animals were treated and compared histologically at 0 and 14 days. Significant improvement in construction of the abrasion wound was observed when the animals were treated with formulated CNNE, whereas stimulation of skin regeneration was depicted in the histological examination. Therefore, it could be summarized that the chitosan coating of the developed NAR NE is a potential platform to accelerate healing of wounds.

Antifouling Property of Oppositely Charged Titania Nanosheet Assembled on Thin Film Composite Reverse Osmosis Membrane for Highly Concentrated Oily Saline Water Treatment

With the blooming of oil and gas industries, oily saline wastewater treatment becomes a viable option to resolve the oily water disposal issue and to provide a source of water for beneficial use. Reverse osmosis (RO) has been touted as a promising technology for oily saline wastewater treatment. However, one great challenge of RO membrane is fouling phenomena, which is caused by the presence of hydrocarbon contents in the oily saline wastewater. This study focuses on the fabrication of antifouling RO membrane for accomplishing simultaneous separation of salt and oil. Thin film nanocomposite (TFN) RO membrane was formed by the layer by layer (LbL) assembly of positively charged TNS (pTNS) and negatively charged TNS (nTNS) on the surface of thin film composite (TFC) membrane. The unique features, rendered by hydrophilic TNS bilayer assembled on TFC membrane in the formation of a hydration layer to enhance the fouling resistance by high concentration oily saline water while maintaining the salt rejection, were discussed in this study. The characterization findings revealed that the surface properties of membrane were improved in terms of surface hydrophilicity, surface roughness, and polyamide(PA) cross-linking. The TFC RO membrane coated with 2-bilayer of TNS achieved >99% and >98% for oil and salt rejection, respectively. During the long-term study, the 2TNS-PA TFN membrane outperformed the pristine TFC membrane by exhibiting high permeability and much lower fouling propensity for low to high concentration of oily saline water concentration (1000 ppm, 5000 ppm and 10,000 ppm) over a 960 min operation. Meanwhile, the average permeability of uncoated TFC membrane could only be recovered by 95.7%, 89.1% and 82.9% for 1000 ppm, 5000 ppm and 10,000 ppm of the oily saline feedwater, respectively. The 2TNS-PA TFN membrane achieved almost 100% flux recovery for three cycles by hydraulic washing.

New Insights on Unique Features and Role of Nanostructured Materials in Cosmetics

The cosmetics industry has boomed in recent years as one of the markets that holds enormous growth potential. Among several industrial sectors, the cosmetics industry has considered nanotechnology-based principles and implemented in product management practices. Out of 1000 registered products available on the global market, up to 13% were referred to as products for cosmetic use. A large number of nanoscale materials with unique physicochemical properties are currently being used in the cosmetics formulations or recommended for future use as nano-systems or novel nanocarriers to encapsulate active ingredients for their efficient delivery through the skin barriers. These nano-systems have demonstrated potential in targeted-oriented drug delivery and offered remarkable features such as better stability, site-specificity, excellent encapsulation efficiency, prolonged action, enhanced skin penetration, and high drug-loading capability. Nevertheless, nanotoxicology research has raised concerns over the excessive use of nanomaterials/nanoparticles in cosmetics, as nanoparticles might enter the skin resulting in health problems. This review provides insights on the characteristic physicochemical features and the potential use of various nanostructured materials, including liposomes, noisome, nanoemulsions, nanoparticles, carbon nanomaterials (graphene, fullerenes), carbon nanotubes, dendrimers, and nanospheres in cosmeceuticals. Moreover, the regulatory aspects of nanomaterials in cosmetics, along with concluding remarks and outlook in this field, were also vetted.