Preparation of Flower-like Nickel-Based Bimetallic Organic Framework Electrodes for High-Efficiency Hybrid Supercapacitors

Synthesis and Optimization of Ni-Based Nano Metal-Organic Frameworks as a Superior Electrode Material for Supercapacitor

Metal-organic frameworks (MOFs) are hybrid materials that are being explored as active electrode materials in energy storage devices, such as rechargeable batteries and supercapacitors (SCs), due to their high surface area, controllable chemical composition, and periodic ordering. However, the facile and controlled synthesis of a pure MOF phase without impurities or without going through a complicated purification process (that also reduces the yield) are challenges that must be resolved for their potential industrial applications. Moreover, various oxide formations of the Ni during Ni-MOF synthesis also represent an issue that affects the purity and performance. To resolve these issues, we report the controlled synthesis of nickel-based metal-organic frameworks (NiMOFs) by optimizing different growth parameters during hydrothermal synthesis and by utilizing nickel chloride as metal salt and H2bdt as the organic ligand, in a ratio of 1:1 at 150 °C. Furthermore, the synthesis was optimized by introducing a magnetic stirring stage, and the reaction temperature varied across 100, 150, and 200 °C to achieve the optimized growth of the NiMOFs crystal. The rarely used H2bdt ligand for Ni-MOF synthesis and the introduction of the ultrasonication stage before putting it in the furnace led to the formation of a pure phase without impurities and oxide formation. The synthesized materials were further characterized by powder X-ray diffraction (XRD) technique, scanning electron microscopy (SEM), and UV-vis spectroscopy. The SEM images exhibited the formation of nano NiMOFs having a rectangular prism shape. The average size was 126.25 nm, 176.0 nm, and 268.4 nm for the samples (1:1)s synthesized at 100 °C, 150 °C, and 200 °C, respectively. The electrochemical performances were examined in a three-electrode configuration, in a wide potential window from -0.4 V to 0.55 V, and an electrolyte concentration of 2M KOH was maintained for each measurement. The charge-discharge galvanostatic measurement results in specific capacitances of 606.62 F/g, 307.33 F/g, and 287.42 F/g at a current density of 1 A/g for the synthesized materials at 100 °C, 150 °C, and 200 °C, respectively.

Biomass-Derived Flexible Carbon Architectures as Self-Supporting Electrodes for Energy Storage

With the swift advancement of the wearable electronic devices industry, the energy storage components of these devices must possess the capability to maintain stable mechanical and chemical properties after undergoing multiple bending or tensile deformations. This circumstance has expedited research efforts toward novel electrode materials for flexible energy storage devices. Nonetheless, among the numerous materials investigated to date, the incorporation of metal current collectors or insulative adhesives remains requisite, which entails additional costs, unnecessary weight, and high contact resistance. At present, biomass-derived flexible architectures stand out as a promising choice in electrochemical energy device applications. Flexible self-supporting properties impart a heightened mechanical performance, obviating the need for additional binders and lowering the contact resistance. Renewable, earth-abundant biomass endows these materials with cost-effectiveness, diversity, and modulable chemical properties. To fully exploit the application potential in biomass-derived flexible carbon architectures, understanding the latest advancements and the comprehensive foundation behind their synthesis assumes significance. This review delves into the comprehensive analysis of biomass feedstocks and methods employed in the synthesis of flexible self-supporting carbon electrodes. Subsequently, the advancements in their application in energy storage devices are elucidated. Finally, an outlook on the potential of flexible carbon architectures and the challenges they face is provided.

From 1D to 2D: Controllable Preparation of 2D Ni-MOFs for Supercapacitors

Controllable modulation strategies between one-dimensional (1D) and two-dimensional (2D) structures have been rarely reported for metal-organic frameworks (MOFs). Here, 1D, 1D/2D, and 2D Ni-MOFs can be facilely prepared by adjusting the ratio of Ni²⁺ and the pyromellitic acid linker. A low-dimensional structure can shorten the transmission distance, while MOFs with a high Ni²⁺ content can supply rich active sites for oxidation-reduction reactions. The 2D structure Ni-MOF with an optimized Ni²⁺/pyromellitic acid ratio presents a good performance of 1036 F g^-1 at a current density of 1 A g^-1 with a comparable rate performance of 62% at 20 A g^-1. The study may offer a facile design to control the structure of MOFs for employing in electrochemical energy storage.

Photo-Induced Preparation of Ag@MOF-801 Composite Based Heterogeneous Nanocatalyst for the Production of Biodiesel

Hybrid materials based on metal-organic frameworks (MOFs) and nanoparticles (NPs) have gained considerable popularity in a variety of applications. Particularly, these types of materials have demonstrated excellent efficiency in heterogeneous catalysis due to the synergistic effect between the components. Herein, we report a simple, eco-friendly, photocatalytic method for the fabrication of Zr containing MOF-801 and a silver (Ag) NPs-based hybrid (Ag@MOF-801). In this method, the photocatalytic property of the central metal ion (Zr) of MOF was exploited to promote the formation and deposition of Ag NPs on the surface of the MOF-801 under the irradiation of visible light. The successful incorporation of Ag NPs was ascertained by powder X-ray diffraction (XRD) and UV-Vis analysis, while the morphology and surface area of the sample was determined by N2 adsorption–desorption and scanning electron microscopy (SEM), respectively. The resulting Ag@MOF-801 hybrid served as a highly efficient catalyst for the transesterification of used vegetable oil (UVO) for the production of biodiesel. The Ag@MOF-801 catalyst exhibited superior catalytic activity compared to its pristine MOF-801 counterpart due to the enhanced surface area of the material.

A porous MOF-derived NiMn2O4 material and its superior energy storage performance for high-performance supercapacitors

A binder-free C@NiMn2O4 electroactive material was prepared through the calcination of a pristine Ni,Mn-MOF at 600 °C for 4 h. The fabricated C@NiMn2O4/NF electrode exhibits an area specific capacitance of 5.39 F cm−2 at 2 mA cm−2.