A Review of CO2 Storage in View of Safety and Cost-Effectiveness

Emerging bio-capture strategies for greenhouse gas reduction: Navigating challenges towards carbon neutrality

Greenhouse gas emissions are significantly contributing to climate change, posing one of the serious threats to our planet. Addressing these emissions urgently is imperative to prevent irreversible planetary changes. One effective long-term mitigation strategy is achieving carbon neutrality. Although numerous countries aim for carbon neutrality by 2050, only a few are on track to realize this ambition. Existing technological solutions, including chemical absorption, cryogenic separation, and membrane separation, are available but tend to be costly and time intensive. Bio-capture methods present a promising opportunity in greenhouse gas mitigation research. Recent developments in biotechnology for capturing greenhouse gases have demonstrated both effectiveness and long-term benefits. This review emphasizes the recent advancements in bio-capture techniques, showcasing them as dependable and economical solutions for carbon neutrality. The article briefly outlines various bio-capture methods and underscores their potential for industrial application. Moreover, it investigates into the challenges faced when integrating bio-capture with carbon capture and storage technology. The study concludes by exploring the recent trends and prospective enhancements in ecosystem revitalization and industrial decarbonization through green conversion techniques, reinforcing the path towards carbon neutrality.

Geo-mechanical and geo-morphology characterisation of the cap rocks in the Niger Delta for potential carbon capture and storage

The world has been battling climate change which is caused by an excessive amount of carbon dioxide in the atmosphere. Carbon sequestration in geological sinks was identified as one of the major methods to curb and reduce the amount of carbon dioxide in the atmosphere. The carbon dioxide stored in the geological formations must not escape back into the atmosphere. Characterisation of potential reservoirs for geological sequestration is pertinent for injectivity, capacity, and most importantly containment of carbon dioxide. The cap rock is one of the most important factors determining carbon sequestration success. This study focuses on the preliminary characterisation of the caprocks for evaluating potential subsurface storage of carbon dioxide based on their petrophysical characteristics. X-ray Diffraction and X-ray Fluorescence provided the mineralogical composition and geochemical data of the cap rocks while Scanning Electron Microscopy-EDS was used to identify the qualitative information on the micromorphological textural structure of the cap rocks in the Niger Delta. Conventional Triaxial experiments were used to determine the elastic and geo-mechanical strength of the caprocks. It was identified that the grain skeleton of caprocks in the region is predominated by Quartz, Albite, and Muscovite. The ratio of the tectosilicate and phyllosilicate minerals indicates that the cap rocks are silicate shale. The peak strength of the caprocks ranged from 48.85 to 80.50 MPa and are classified as strong rocks. The cap rocks showed a quasi-elastic behaviour after being subjected to compressive axial force. The elastic modulus of the caprocks was also observed. The characteristics exhibited by the shale caprock at the rock matrix level are highly favourable for sealing carbon dioxide and hence indicate capability for use in carbon sequestration.

Integrated coupled assessment of geostorage and geothermal prospects in the oil fields of Upper Assam Basin

This study proposes an integrated approach of assessing CO2 storage potential and geothermal energy prospect based on the data of seventeen depleted wells of Upper Assam Basin which could assist the global objective of net zero transition. The petrophysical properties of Tipam, Barail and Lakadong + Therria Formations from the seventeen wells have been utilised to perform the Monte Carlo simulation for probabilistic estimation of the CO2 storage in the Upper Assam Basin. This preliminary work showed that the mean storage capacity of 18.8 ± 0.7 MT, 19.8 ± 0.9 MT and 4.5 ± 0.8 MT could potentially be stored in the three geological formations of the basin. The corrected bottom hole temperature values for the studied seventeen wells were determined using the well log data and Waples and Harrison method; these values provided a static geothermal gradient for each well, which varies widely from 0.017 to 0.033 °C/m. In order to enable geothermal prospectivity, static formation temperature maps have been generated for the studied wells. The probabilistic assessment of stored heat-in-place and formation temperature maps delimited five prospective sites for the extraction of geothermal energy in the basin. The study also presented a risk assessment for CO2 storage development in the basin. Further, the study illustrated an economic analysis of the implementation of a CO2 storage project and geothermal operations in the basin.

Research on carbon dioxide capture materials used for carbon dioxide capture, utilization, and storage technology: a review

In recent years, climate change has increasingly become one of the major challenges facing mankind today, seriously threatening the survival and sustainable development of mankind. Dramatically increasing carbon dioxide concentrations are thought to cause a severe greenhouse effect, leading to severe and sustained global warming, associated climate instability and unwelcome natural disasters, melting glaciers and extreme weather patterns. The treatment of flue gas from thermal power plants uses carbon capture, utilization, and storage (CCUS) technology, one of the most promising current methods to accomplish significant CO2 emission reduction. In order to implement the technological and financial system of CO2 capture, which is the key technology of CCUS technology and accounts for 70-80% of the overall cost of CCUS technology, it is crucial to create more effective adsorbents. Nowadays, with the development and application of various carbon dioxide capture materials, it is necessary to review and summarize carbon dioxide capture materials in time. In this paper, the main technologies of CO2 capture are reviewed, with emphasis on the latest research status of CO2 capture materials, such as amines, zeolites, alkali metals, as well as emerging MOFs and carbon nanomaterials. More and more research on CO2 capture materials has used a variety of improved methods, which have achieved high CO2 capture performance. For example, doping of layered double hydroxides (LDH) with metal atoms significantly increases the active site on the surface of the material, which has a significant impact on improving the CO2 capture capacity and performance stability of LDH. Although many carbon capture materials have been developed, high cost and low technology scale remain major obstacles to CO2 capture. Future research should focus on designing low-cost, high-availability carbon capture materials.

Advancing "Carbon Peak" and "Carbon Neutrality" in China: A Comprehensive Review of Current Global Research on Carbon Capture, Utilization, and Storage Technology and Its Implications

Carbon capture, utilization, and storage (CCUS) technology plays a pivotal role in China's "Carbon Peak" and "Carbon Neutrality" goals. This approach offers low-carbon, zero-carbon, and even negative-carbon solutions. This paper employs bibliometric analysis using the Web of Science to comprehensively review global CCUS progress and discuss future development prospects in China. The findings underscore it as a prominent research focus, attracting scholars from both domestic and international arenas. China notably leads the global landscape in terms of research paper output, with the Chinese Academy of Sciences holding a prominent position in total published papers. The research predominantly centers on refining geological storage techniques and optimizing oil and gas recovery rates. Among the CCUS pathways, enhanced oil recovery technology stands out due to its relative maturity and commercial applicability, particularly within the conventional oil and gas reservoirs. The application potential of enhanced gas recovery technology, especially in the Sichuan and Ordos Basins in China, necessitates robust research and demonstration efforts. Within China's current energy landscape, "Blue Hydrogen" emerges as the primary solution for hydrogen production in conjunction with CCUS technology. The underground coal gasification approach holds significant promise as a hydrogen production avenue, albeit with inherent ecological and environmental challenges tied to geological storage that require meticulous consideration. The establishment of effective risk identification and evaluation methodologies for geological storage is imperative. The trajectory ahead involves a strategic convergence of policy, technology, and market dynamics to enhance China's CCUS policy framework, legislative framework, standardization initiatives, and pioneering technological advancements. These collective efforts converge to outline an exclusive development pathway in China. This study assumes a pivotal role in accelerating CCUS technology research and deployment, enhancing oil and gas recovery efficiency, and ultimately realizing the overarching goals of a "Dual Carbon" future.

Dynamic modeling of geological carbon storage in an oil reservoir, Bredasdorp Basin, South Africa

Geological carbon storage provides an efficient technology for the large-scale reduction of atmospheric carbon, and the drive for net-zero emissions may necessitate the future usage of oil reservoirs for CO2 projects (without oil production), hence, dynamic modeling of an oil reservoir for CO2 storage in the Bredasdorp basin, South Africa, was therefore conducted. Injection into the reservoir was for 20 years (2030-2050), and 100 years (2050-2150) to study the CO2-brine-oil interactions, with sensitivities carried out on reservoir boundary conditions. The closed boundary scenario experienced pressure buildup with a target injection rate of 0.5 Mt/year, and a cutback on injection rate progressively until 2050 to not exceed the fracture pressure of the reservoir. The CO2 plume migration was not rapid due to the reduced volume of CO2 injected and the confining pressure. The system was gravity dominated, and gravity stability was not attained at the end of the simulation as fluid interfaces were not yet flat. The open boundary reservoir did not experience a pressure buildup because all boundaries were open, the target injection rate was achieved, and it was a viscous-dominated system. In both cases, the dissolution of CO2 in oil and brine was active, and there was a growing increase of CO2 fraction dissolved in water and oil, a decline in gaseous mobile CO2 phase between 2050 and 2150, and active trapping mechanisms were structural trapping, dissolution in oil and water, and residual trapping. The study showed that boundary condition was very crucial to the success of the project, with direct impacts on injection rate and pressure. This pioneering study has opened a vista on the injection of CO2 into an oil reservoir, and CO2-brine-oil interactions, with sensitivities carried out on reservoir boundary conditions in a closed and an open hydrocarbon system in South Africa.

Enhancing the CO2 trapping capacity of Saudi Arabian basalt via nanofluid treatment: Implications for CO2 geo-storage

Mineralization reactions in basaltic formations have gained recent interest as an effective method for CO₂ geo-storage in order to mitigate anthropogenic greenhouse gas emissions. The CO₂/rock interactions, including interfacial tension and wettability, are crucial factors in determining the CO₂ trapping capacity and the feasibility of CO₂ geological storage in these formations. The Red Sea geological coast in Saudi Arabia has many basaltic formations, and their wetting characteristics are rarely reported in the literature. Moreover, organic acid contamination is inherent in geo-storage formations and significantly impacts their CO₂ geo-storage capacities. Hence, to reverse the organic effect, the influence of various SiO₂ nanofluid concentrations (0.05-0.75 wt%) on the CO₂-wettability of organic-acid aged Saudi Arabian (SA) basalt is evaluated herein at 323 K and various pressures (0.1-20 MPa) via contact angle measurements. The SA basalt substrates are characterized via various techniques, including atomic force microscopy, energy dispersive spectroscopy, scanning electron microscopy, and others. In addition, the CO₂ column heights that correspond to the capillary entry pressure before and after nanofluid treatment are calculated. The results show that the organic acid-aged SA basalt substrates become intermediate-wet to CO₂-wet under reservoir pressure and temperature conditions. When treated with SiO₂ nanofluids, however, the SA basalt substrates become weakly water-wet, and the optimum performance is observed at an SiO₂ nanofluid concentration of 0.1 wt%. At 323 K and 20 MPa, the CO₂ column height corresponding to the capillary entry pressure increases from -957 m for the organic-aged SA basalt to 6253 m for the 0.1 wt% nano-treated SA basalt. The results suggest that the CO₂ containment security of organic-acid-contaminated SA basalt can be enhanced by SiO₂ nanofluid treatment. Thus, the results of this study may play a significant role in assessing the trapping of CO₂ in SA basaltic formations.

Pore-scale Ostwald ripening of gas bubbles in the presence of oil and water in porous media

HYPOTHESIS

Ostwald ripening of gas bubbles is a spontaneous mass transfer process that can impact the storage volume of trapped gas in the subsurface. In homogeneous porous media with identical pores, bubbles evolve toward an equilibrium state of equal pressure and volume. How the presence of two liquids impacts ripening of a bubble population is less known. We hypothesize that the equilibrium bubble sizes depend on the surrounding liquid configuration and oil/water capillary pressure.

METHOD AND NUMERICAL EXPERIMENTS

We investigate ripening of nitrogen bubbles in homogeneous porous media containing decane and water using a level set method that alternately simulates capillary-controlled displacement and mass transfer between bubbles to eradicate chemical-potential differences. We explore impacts of initial fluid distribution and oil/water capillary pressure on the bubble evolution.

FINDINGS

Ripening in three-phase scenarios in porous media stabilizes gas bubbles to sizes that depend on their surrounding liquids. Bubbles in oil decrease in size while bubbles in water increase in size with increasing oil/water capillary pressure. Bubbles in oil reach local equilibrium before the three-phase system stabilizes globally. A potential implication for field-scale gas storage is that the trapped gas fractions in oil and water vary with depth in the oil/water transition zone.

H2, CO2, and CH4 Adsorption Potential of Kerogen as a Function of Pressure, Temperature, and Maturity

We performed molecular dynamics simulation to elucidate the adsorption behavior of hydrogen (H2), carbon dioxide (CO2), and methane (CH4) on four sub-models of type II kerogens (organic matter) of varying thermal maturities over a wide range of pressures (2.75 to 20 MPa) and temperatures (323 to 423 K). The adsorption capacity was directly correlated with pressure but indirectly correlated with temperature, regardless of the kerogen or gas type. The maximum adsorption capacity was 10.6 mmol/g for the CO2, 7.5 mmol/g for CH4, and 3.7 mmol/g for the H2 in overmature kerogen at 20 MPa and 323 K. In all kerogens, adsorption followed the trend CO2 > CH4 > H2 attributed to the larger molecular size of CO2, which increased its affinity toward the kerogen. In addition, the adsorption capacity was directly associated with maturity and carbon content. This behavior can be attributed to a specific functional group, i.e., H, O, N, or S, and an increase in the effective pore volume, as both are correlated with organic matter maturity, which is directly proportional to the adsorption capacity. With the increase in carbon content from 40% to 80%, the adsorption capacity increased from 2.4 to 3.0 mmol/g for H2, 7.7 to 9.5 mmol/g for CO2, and 4.7 to 6.3 mmol/g for CH4 at 15 MPa and 323 K. With the increase in micropores, the porosity increased, and thus II-D offered the maximum adsorption capacity and the minimum II-A kerogen. For example, at a fixed pressure (20 MPa) and temperature (373 K), the CO2 adsorption capacity for type II-A kerogen was 7.3 mmol/g, while type II-D adsorbed 8.9 mmol/g at the same conditions. Kerogen porosity and the respective adsorption capacities of all gases followed the order II-D > II-C > II-B > II-A, suggesting a direct correlation between the adsorption capacity and kerogen porosity. These findings thus serve as a preliminary dataset on the gas adsorption affinity of the organic-rich shale reservoirs and have potential implications for CO2 and H2 storage in organic-rich formations.

Chemical Looping Combustion: A Brief Overview

The current development of chemical looping combustion (CLC) technology is presented in this paper. This technique of energy conversion enables burning of hydrocarbon fuels with dramatically reduced CO2 emission into the atmosphere, since the inherent separation of carbon dioxide takes place directly in a combustion unit. In the beginning, the general idea of the CLC process is described, which takes advantage of solids (so-called oxygen carriers) being able to transport oxygen between combustion air and burning fuel. The main groups of oxygen carriers (OC) are characterized and compared, which are Fe-, Mn-, Cu-, Ni-, and Co-based materials. Moreover, different constructions of reactors tailored to perform the CLC process are described, including fluidized-bed reactors, swing reactors, and rotary reactors. The whole systems are based on the chemical looping concept, such as syngas CLC (SG-CLC), in situ Gasification CLC (iG-CLC), chemical looping with oxygen uncoupling (CLOU), and chemical looping reforming (CLR), are discussed as well. Finally, a comparison with other pro-CCS (carbon capture and storage) technologies is provided.

State of the Art in Separation Processes for Alternative Working Fluids in Clean and Efficient Power Generation

Gas turbines must now comply with much stricter emission control regulations. In fact, to combat the greenhouse effect, regulatory authorities have drastically reduced allowable emission levels. For example, in less than 12 years, the United States’ Clean Air Act issued the New Source Performance Standards (NSPS), which tightened the NOx emission margin of natural gas combustion (from 75 ppm to 10 ppm). On the other hand, despite those efforts, the high demand for energy produced by fossil-fueled gas turbines in power plants has resulted in dramatic increases in anthropogenic CO2 and NOx emitted by gas combustors. Most systems responsible for these undesirable emissions are directly linked to power generation, with gas turbines playing a pivotal role. Yet, gas turbines are still widely used in power plants and will continue to meet the growing demand. Therefore, sequestration and separation techniques such as Carbon Capture and Storage (CCS) and Air Separation Units (ASU) are essential to reduce CO2 and NOx emissions while allowing large amounts of power to be generated from these systems. This paper provides an in-depth examination of the current state of the art in alternative working fluids utilized in the power generation industry (i.e., gas turbines, combustion). In addition, this paper highlights the recent contribution of integrating separation techniques, such as air separation, steam methane reforming, and water-gas shifting, to the power generation industry to facilitate a continuous and adequate supply of alternative working fluids.

Biotechnology for carbon capture and fixation: Critical review and future directions

To mitigate the growing threat of climate change and develop novel technologies that can eliminate carbon dioxide, the most abundant greenhouse gas derived from the flue gas stream of the fossil fuel-fired power stations, is momentous. The development of carbon capture and sequestration-based technologies may play a significant role in this regard. Carbon fixation mostly occurs by photosynthesizing plants as well as photo and chemoautotrophic microbes that turn the atmospheric carbon dioxide into organic materials via their enzymes. Biofuel can offer a sustainable solution for carbon mitigation. The pragmatic implementation of biofuel production processes is neither cost-effective nor has been proven safe over the long term. Searching for ways to enhance biofuel generation by the employment of genetic engineering is vital. Carbon biosequestration can help to curb the greenhouse effect. In addition, new genomic approaches, which are able to use gene-splicing biotechnology techniques and recombinant DNA technology to produce genetically modified organisms, can contribute to improvement in sustainable and renewable biofuel and biomaterial production from microorganisms. Biopolymers, Biosurfactants, and Biochars are suggested as sustainable future trends. This study aims to pave the way for implementing biotechnology methods to capture carbon and decrease the demand and consumption of fossil fuels as well as the emissions of greenhouse gases. Having a better image of microorganisms' potential role in carbon capture and storage can be prolific in developing powerful techniques to reduce CO₂ emissions.

Green Concrete Based on Quaternary Binders with Significant Reduced of CO2 Emissions

The article presents studies of plain concretes prepared based on a quaternary binder containing various percentages of selected supplementary cementitious materials (SCMs). The possibilities of nanotechnology in concrete technology were also used. An additional important environmental goal of the proposed solution was to create the possibility of reducing CO2 emissions and the carbon footprint generated during the production of ordinary Portland cement (OPC). As the main substitute for the OPC, siliceous fly ash (FA) was used. Moreover, silica fume (SF) and nanosilica (nS) were also used. During examinations, the main mechanical properties of composites, i.e., compressive strength (fcm) and splitting tensile strength (fctm), were assessed. The microstructure of these materials was also analyzed using a scanning electron microscope (SEM). In addition to the experimental research, simulations of the possible reduction of CO2 emissions to the atmosphere, as a result of the proposed solutions, were also carried out. It was found that the quaternary concrete is characterized by a well-developed structure and has high values of mechanical parameters. Furthermore, the use of green concrete based on quaternary binders enables a significant reduction in CO2 emissions. Therefore quaternary green concrete containing SCMs could be a useful alternative to plain concretes covering both the technical and environmental aspects. The present study indicates that quaternary binders can perform better than OPC as far as mechanical properties and microstructures are concerned. Therefore they can be used during the production of durable concretes used to perform structures in traditional and industrial construction.

Capture and Reuse of Carbon Dioxide (CO2) for a Plastics Circular Economy: A Review

Plastic production has been increasing at enormous rates. Particularly, the socioenvironmental problems resulting from the linear economy model have been widely discussed, especially regarding plastic pieces intended for single use and disposed improperly in the environment. Nonetheless, greenhouse gas emissions caused by inappropriate disposal or recycling and by the many production stages have not been discussed thoroughly. Regarding the manufacturing processes, carbon dioxide is produced mainly through heating of process streams and intrinsic chemical transformations, explaining why first-generation petrochemical industries are among the top five most greenhouse gas (GHG)-polluting businesses. Consequently, the plastics market must pursue full integration with the circular economy approach, promoting the simultaneous recycling of plastic wastes and sequestration and reuse of CO2 through carbon capture and utilization (CCU) strategies, which can be employed for the manufacture of olefins (among other process streams) and reduction of fossil-fuel demands and environmental impacts. Considering the previous remarks, the present manuscript’s purpose is to provide a review regarding CO2 emissions, capture, and utilization in the plastics industry. A detailed bibliometric review of both the scientific and the patent literature available is presented, including the description of key players and critical discussions and suggestions about the main technologies. As shown throughout the text, the number of documents has grown steadily, illustrating the increasing importance of CCU strategies in the field of plastics manufacture.

Active Nanointerfaces Based on Enzyme Carbonic Anhydrase and Metal-Organic Framework for Carbon Dioxide Reduction

Carbonic anhydrases are enzymes capable of transforming carbon dioxide into bicarbonate to maintain functionality of biological systems. Synthetic isolation and implementation of carbonic anhydrases into membrane have recently raised hopes for emerging and efficient strategies that could reduce greenhouse emission and the footprint of anthropogenic activities. However, implementation of such enzymes is currently challenged by the resulting membrane’s wetting capability, overall membrane performance for gas sensing, adsorption and transformation, and by the low solubility of carbon dioxide in water, the required medium for enzyme functionality. We developed the next generation of enzyme-based interfaces capable to efficiently adsorb and reduce carbon dioxide at room temperature. For this, we integrated carbonic anhydrase with a hydrophilic, user-synthesized metal–organic framework; we showed how the framework’s porosity and controlled morphology contribute to viable enzyme binding to create functional surfaces for the adsorption and reduction of carbon dioxide. Our analysis based on electron and atomic microscopy, infrared spectroscopy, and colorimetric assays demonstrated the functionality of such interfaces, while Brunauer–Emmett–Teller analysis and gas chromatography analysis allowed additional evaluation of the efficiency of carbon dioxide adsorption and reduction. Our study is expected to impact the design and development of active interfaces based on enzymes to be used as green approaches for carbon dioxide transformation and mitigation of global anthropogenic activities.

An Accurate Model to Calculate CO2 Solubility in Pure Water and in Seawater at Hydrate–Liquid Water Two-Phase Equilibrium

Understanding of CO2 hydrate–liquid water two-phase equilibrium is very important for CO2 storage in deep sea and in submarine sediments. This study proposed an accurate thermodynamic model to calculate CO2 solubility in pure water and in seawater at hydrate–liquid water equilibrium (HLWE). The van der Waals–Platteeuw model coupling with angle-dependent ab initio intermolecular potentials was used to calculate the chemical potential of hydrate phase. Two methods were used to describe the aqueous phase. One is using the Pitzer model to calculate the activity of water and using the Poynting correction to calculate the fugacity of CO2 dissolved in water. Another is using the Lennard–Jones-referenced Statistical Associating Fluid Theory (SAFT-LJ) equation of state (EOS) to calculate the activity of water and the fugacity of dissolved CO2. There are no parameters evaluated from experimental data of HLWE in this model. Comparison with experimental data indicates that this model can calculate CO2 solubility in pure water and in seawater at HLWE with high accuracy. This model predicts that CO2 solubility at HLWE increases with the increasing temperature, which agrees well with available experimental data. In regards to the pressure and salinity dependences of CO2 solubility at HLWE, there are some discrepancies among experimental data. This model predicts that CO2 solubility at HLWE decreases with the increasing pressure and salinity, which is consistent with most of experimental data sets. Compared to previous models, this model covers a wider range of pressure (up to 1000 bar) and is generally more accurate in CO2 solubility in aqueous solutions and in composition of hydrate phase. A computer program for the calculation of CO2 solubility in pure water and in seawater at hydrate–liquid water equilibrium can be obtained from the corresponding author via email.

A review on ex situ mineral carbonation

The increased CO₂ quantities in the environment have led to many harmful effects. Therefore, it is very important to decrease the CO₂ levels in the environment. CO₂ capture along with safe and permanent storage using mineral CO₂ sequestration method can play an important role to reduce carbon emissions into the environment. Mineral sequestration is a stable storage method that provides long-term storage and an appropriate substitute for the more popular geological storage method. The process is most suited for places where there is a lack of underground cavities for underground geological storage. Minerals rich in Ca and Mg are used predominantly in carbonation reactions. In addition, those alkaline wastes that are rich in Mg and Ca such as cement waste, steel slag and many process ashes can also be employed in CO₂ sequestration. Mineral carbonation could be used for the sequestration of billions of tonnes of CO₂ every year. However, various drawbacks related to mineral carbonation still need to be addressed, such as resolving the slow rate of reactions, necessity of large amounts of feedstock, decreasing the high overall cost of CO₂ sequestration and reducing the huge energy requirements to accelerate the carbonation reaction. This study explores a number of carbonation methods, parameters that control the process and future potential applications of carbonated products.

The Geomechanical and Fault Activation Modeling during CO2 Injection into Deep Minjur Reservoir, Eastern Saudi Arabia

The release of large quantities of CO2 into the atmosphere is one of the major causes of global warming. The most viable method to control the level of CO2 in the atmosphere is to capture and permanently sequestrate the excess amount of CO2 in subsurface geological reservoirs. The injection of CO2 gives rise to pore pressure buildup. It is crucial to monitor the rising pore pressure in order to prevent the potential failure of the reservoir and the subsequent leakage of the stored CO2 into the overburden layers, and then back to the atmosphere. In this paper, the Minjur sandstone reservoir in eastern Saudi Arabia was considered for establishing a coupled geomechanical model and performing the corresponding stability analysis. During the geomechanical modeling process, the fault passing through the Minjur and Marrat layers was also considered. The injection-induced pore-pressure and ground uplift profiles were calculated for the case of absence of a fault across the reservoir, as well as the case with a fault. The stability analysis was performed using the Mohr–Coulomb failure criterion. In the current study, the excessive increase in pore pressure, in the absence of geological faults, moved the reservoir closer to the failure envelope, but in the presence of geological faults, the reservoir reached to the failure envelope and the faults were activated. The developed geomechanical model provided estimates for the safe injection parameters of CO2 based on the magnitudes of the reservoir pore pressure and stresses in the reservoir.

Carbon Emission Reduction—Carbon Tax, Carbon Trading, and Carbon Offset

The Paris Agreement was signed by 195 nations in December 2015 to strengthen the global response to the threat of climate change following the 1992 United Nations Framework Convention on Climate Change (UNFCC) and the 1997 Kyoto Protocol [...]

Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition

The paper presented herein investigates the effects of using supplementary cementitious materials (SCMs) in quaternary mixtures on the compressive strength and splitting tensile strength of plain concrete. In addition, environmental benefits resulting from the proposed solutions were analysed. A total of four concrete mixtures were designed, having a constant water/binder ratio of 0.4 and total binder content of 352 kg/m3. The control mixture only contained ordinary Portland cement (OPC) as binder, whereas others incorporated quaternary mixtures of: OPC, fly ash (FA), silica fume (SF), and nanosilica (nS). Based on the obtained test results, it was found that concretes made on quaternary binders containing nanoadditives have very favorable mechanical parameters. The quaternary concrete containing: 80% OPC, 5% FA, 10% SF, and 5% nS have shown the best results in terms of good compressive strength and splitting tensile strength, whereas the worst mechanical parameters were characterized by concrete with more content of FA additive in the concrete mix, i.e., 15%. Moreover, the results of compressive strength and splitting tensile strength are qualitatively convergent. Furthermore, reducing the amount of OPC in the composition of the concrete mix in quaternary concretes causes environmental benefits associated with the reduction of: raw materials that are required for burning clinker, electricity, and heat energy in the production of cement.