Hydrothermal Carbonization as a Valuable Tool for Energy and Environmental Applications: A Review

A comprehensive review of enhanced CO2 capture using activated carbon derived from biomass feedstock

The increasing level of atmospheric CO2 requires the urgent development of effective capture technologies. This comprehensive review thoroughly examines various methods for the synthesis of carbon materials, modification techniques for converting biomass feedstock into carbon materials and pivotal factors impacting their properties. The novel aspect of this review is its in-depth comparison of how these modifications specifically affect the pore structure and surface area together with the exploration of the mechanism underlying the enhancement of CO2 adsorption performance. Additionally, this review addresses research gaps and provides recommendations for future studies concerning the advantages and drawbacks of CO2 adsorbents and their prospects for commercialization and economic feasibility. This article revealed that among the various strategies, template carbonization offers a viable option for providing control of the material pore diameter and structure without additional modification treatments. Optimizing the pore structure of activated carbons, particularly those activated with agents such as KOH and ZnCl2, together with synthesizing hybrid activated carbons using multiple activating agents, is crucial for enhancing their CO2 capture performance. Cost-benefit analysis suggests that biomass-derived activated carbons can significantly meet the escalating demand for CO2 capture materials, offering economic advantages and supporting sustainable waste management.

A comprehensive review of PETW recycling for supercapacitor applications

The rising measure of waste produced from polyethene terephthalate (PET) and the interest in eco-accommodating energy storage arrangements have prompted escalated examination into reusing waste PET into supercapacitors. This review aims to provide a comprehensive overview of the most recent advancements in the recycling of polyethylene terephthalate waste (PETW), as a supercapacitor electrode precursor. The review looks at different methodologies for recovering PET from waste, including mechanical, chemical, enzyme, etc. It further explores the combination strategies for electrode materials produced using PET. Besides, PET-derived materials' electrochemical performance in supercapacitor application is likewise broken down, with an emphasis on key electrochemical boundaries like capacitive behaviour, cyclic stability, and electrochemical impedance spectroscopy. The need for scalable and cost-effective recycling methods, the creation of eco-friendly electrolytes, and the improvement of the electrochemical performance of recycled PET-based supercapacitors are just a few of the issues and opportunities highlighted in this expanding eco-friendly industry. Overall, the goal of this review is to provide a comprehensive understanding of the cutting-edge developments in the use of recycled PETW as a precursor for supercapacitor electrodes, highlighting the eco-friendly energy storage solution's potential and contributing to a sustainable future.

Hydrothermal pretreatment of press mud: Characterization and potential application of hydrochar and process water

In the present study, press mud (PM), a major waste by-product from sugar industries, was subjected to hydrothermal pretreatment (HTP) to create resource recovery opportunities. The HTP process was performed with the PM samples in a laboratory scale high pressure batch reactor (capacity = 0.7 L) at 160 °C and 200 °C temperatures (solids content = 5 % and 30 %). The pretreatment resulted in separation of solid and liquid phases which are termed as solid hydrochar (HC) and process water (PW), respectively. High heating value (HHV) of HC was ∼14-18 MJ kg-1, slightly higher than that of PM (14 MJ kg-1). The thermogravimetric analysis showed about 1.5-1.7 times higher heat release from HC burning compared to that observed from combustion of PM. Apart from this, the HC and PM showed no phytotoxicity during germination of mung bean (Vigna radiata). Moreover, the biochemical methane potential test on the PW showed a generation of 167-245 mL biogas per gram of chemical oxygen demand added. Hence, the HTP offers several resource recovery opportunities from PM which may also reduce the risks of environmental degradation.

A novel approach for the facile synthesis of zinc oxide/carbon hybrid systems from corn distillers soluble: Surface modification and characterization for sustainable remediation

Sustainable, efficient, and environmentally friendly ways to tailor the carbonaceous materials from bio sources with desired functionalities remain a challenge around the world. In this study, we represent a novel approach to synthesize carbon hybrid material based on Zinc Oxide/carbon (ZnO/C) hybrid systems by catalytic hydrothermal process via crosslinking reaction through nucleation and growth of ZnO particles at the functional groups of oxidized carbon material. This research explored the volarization of Condensed Corn Distillers Soluble (CDS) as a carbon precursor to synthesize biobased carbon spheres. Surface modification of the produced carbon spheres took place using zinc chloride (ZnCl2) during hydrothermal carbonization (HTC). Zinc chloride (ZnCl2) was used to function as a catalyst during HTC and functioned as a ZnO source to synthesize (ZnO/C) hybrid systems. Design Expert software v13 was used to design the hydrothermal carbonization (HTC) experiments and response surface methodology was used to find the optimized conditions for the preparation of carbon hybrid systems. The hydrothermal synthesis process introduced 3D stone like zinc oxide particles onto the carbon matrix. These particles were self-assembled onto the carbon framework to produce carbon hybrid systems with unique physical, chemical, structural and functional properties. Herein, the obtained carbon hybrid systems (ZnO/C) were investigated and discussed in detail. ZnO/C hybrid systems were analyzed for surface morphology using scanning electron microscopy (SEM) that presented a 3D spherical interconnected phase and XRD analyses were used for phase crystallinity that showed new crystalline phases such as hopeite and zincite after the ZnCl2 incorporation. Surface functional groups were also analyzed by FTIR and results confirmed the presence of hydrophilic groups such as -OH, CC, and COOH on the surface of ZnO/C hybrid carbon systems. This study provided the insightful guidance for tailoring novel design of multifunctional carbon material as an adsorbent/catalyst for various applications of sustainable remediation.

Waste-to-energy barriers and solutions for developing countries with limited water and energy resources

The environmental risks of conventional waste disposal methods, along with the resource and energy value of waste, have formed the foundation for waste-to-energy (WtE) technology. WtE systems that work on recovering energy present a suitable solution to generate energy and sustainably manage waste. This type of waste management system in the Middle East and North Africa (MENA) region is still considered underutilized as WtE technology is rarely used due to a lack of experience in their specific local conditions, lack of qualified competencies, and the absence of an appropriate regulatory and legislative structure. This study reviews the existing WtE policies and regulations, and it investigates the potential of WtE techniques in the MENA region. Moreover, sustainability in water consumption is critical; therefore, various water-conservation techniques were reviewed and considered when selecting regulatory actions. The radiative sky cooling technique was recommended to reduce water consumption. Barriers to implementing WtE and solutions for developing countries were presented to enable proper WtE implementation.

Biowaste management by hydrothermal carbonization and anaerobic co-digestion: Synergistic effects and comparative metagenomic analysis

The feasibility of anaerobic co-digestion in semicontinuous mode of two major urban biowaste, food waste (FW) and garden and park waste (GPW) (75 % FW and 25 % GPW) as well as the co-digestion of FW with the process water originated from the hydrothermal carbonization of GPW (95 % FW and 5 % process water), both on a COD basis, has been assessed. The effect of varying organic loading rate (OLR) from 1.5 to 3.5 g COD/L·d on methane yield, gross energy recovery, and microbiome population was evaluated. For comparison, anaerobic digestion of FW was also conducted to determine the best strategy for sustainable biowaste management. This study showed an optimal OLR of 2.5 g COD/L·d. Acetic and propionic acid content increased as OLR raised for each condition studied, while methane yield decreased at the highest OLR tested indicating overloading of the system. The anaerobic co-digestion of FW and process water showed a 10 % increase on methane production compared to anaerobic digestion of FW (324 vs. 294 mL CH4 STP/L·d). Moreover, it enhances the process due to a greater abundance and diversity of hydrolytic and acidogenic bacteria belonging to Bacterioidota, Firmicutes, and Chloroflexi phyla, as well as promotes the hydrogenotrophic pathway under higher propionic concentrations which is not usually favoured for methane production. The integration of hydrothermal carbonization of GPW with the anaerobic co-digestion of 95 % FW and 5 % of process water results in the highest potential energy recovery and could be a good strategy for sustainable management of urban biowaste.

Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury

With the growing population, the accumulation of waste materials (WMs) (industrial/household waste) in the environment incessantly increases, affecting human health. Additionally, it affects the climate and ecosystem of terrestrial and water habitats, thereby needing effective management technology to control environmental pollution. In this aspect, managing these WMs to develop products that mitigate the associated issues is necessary. Researchers continue to focus on WMs management by adopting a circular economy. These WMs convert into useful/value-added products such as polymers and nanomaterials (NMs), especially carbon nanomaterials (CNs). The conversion/transformation of waste material into useful products is one of the best solutions for managing waste. Waste-derived CNs (WD-CNs) have established boundless promises for numerous applications like environmental remediation, energy, catalysts, sensors, and biomedical applications. This review paper discusses the several sources of waste material (agricultural, plastic, industrial, biomass, and other) transforming into WD-CNs, such as carbon nanotubes (CNTs), biochar, graphene, carbon nanofibers (CNFs), carbon dots, etc., are extensively elaborated and their application. The impact of metal doping within the WD-CNs is briefly discussed, along with their applicability to end applications.

Unlocking the potential of biochar in the remediation of soils contaminated with heavy metals for sustainable agriculture

Agricultural soils contaminated with heavy metals (HMs) impose a threat to the environmental and to human health. Amendment with biochar could be an eco-friendly and cost-effective option to decrease HMs in contaminated soil. This paper reviews the application of biochar as a soil amendment to immobilise HMs in contaminated soil. We discuss the technologies of its preparation, their specific properties, and effect on the bioavailability of HMs. Biochar stabilises HMs in contaminated soil, enhance the overall quality of the contaminated soil, and significantly reduce HM uptake by plants, making it an option in soil remediation for HM contamination. Biochar enhances the physical (e.g. bulk density, soil structure, water holding capacity), chemical (e.g. cation exchange capacity, pH, nutrient availability, ion exchange, complexes), and biological properties (e.g. microbial abundance, enzymatic activities) of contaminated soil. Biochar also enhances soil fertility, improves plant growth, and reduces the plant availability of HMs. Various field studies have shown that biochar application reduces the bioavailability of HMs from contaminated soil while increasing crop yield. The review highlights the positive effects of biochar by reducing HM bioavailability in contaminated soils. Future work is recommended to ensure that biochars offer a safe and sustainable solution to remediate soils contaminated with HMs.

Hydrothermal carbonization of vegetable-tanned leather shavings (HTC-VTS) for environmental remediation: optimization of process conditions

Herein, the response surface methodology (RSM) has been used to study simultaneously the effects of carbonization temperature, residence time and moisture content on the activated hydrochar preparation-based vegetable-tanned leather shavings (VTS) using hydrothermal carbonization method (HTC). Owing to the desirability chosen, three responses were analysed, namely: the hydrochar yield, iodine and methylene blue numbers. The analysis of experimental results revealed that the hydrochar yield was decreased with increase in carbonization temperature which led to micropores formation inside the hydrochar network. The optimal preparation conditions retained were: 83.10%, 390.44 mg g-1 and 259.63 mg g-1 for the hydrochar yield, iodine and methylene blue number respectively. The hydrochar micrograph showed the presence of external pores, whereas the FTIR analysis recorded the presence of acidic functional groups found on hydrochar surface. The findings revealed that the VTS is a good precursor for the hydrochar preparation useful in the removal of organic and inorganic pollutants in aqueous media.

Using the Aqueous Phase Produced from Hydrothermal Carbonization Process of Brown Seaweed to Improve the Growth of Phaseolus vulgaris

Seaweeds are considered a biomass for third-generation biofuel, and hydrothermal carbonization (HTC) is a valuable process for efficiently disposing of the excess of macroalgae biomass for conversion into multiple value-added products. However, the HTC process produces a liquid phase to be disposed of. The present study aims to investigate the effects of seed-priming treatment with three HTC-discarded liquid phases (namely AHL₁₈₀, AHL₂₄₀, and AHL₃₀₀), obtained from different experimental procedures, on seed germination and plant growth and productivity of Phaseolus vulgaris L. To disentangle the osmotic effects from the use of AHL, isotonic solutions of polyethylene glycol (PEG) 6000 have also been tested. Seed germination was not affected by AHL seed-priming treatment. In contrast, PEG-treated samples showed significantly lower seed germination success. AHL-treated samples showed changes in plant biomass: higher shoot biomass was recorded especially in AHL₁₈₀ samples. Conversely, AHL₂₄₀ and AHL₃₀₀ samples showed higher root biomass. The higher plant biomass values recorded in AHL-treated samples were the consequence of higher values of photosynthesis rate and water use efficiency, which, in turn, were related to higher stomatal density. Recorded data strongly support the hypothesis of the AHL solution reuse in agriculture in the framework of resource management and circular green economy.

Methylene Blue Dye Adsorption on Iron Oxide-Hydrochar Composite Synthesized via a Facile Microwave-Assisted Hydrothermal Carbonization of Pomegranate Peels' Waste

The toxicity of dyes has a long-lasting negative impact on aquatic life. Adsorption is an inexpensive, simple, and straightforward technique for eliminating pollutants. One of the challenges facing adsorption is that it is hard to collect the adsorbents after the adsorption. Adding a magnetic property to the adsorbents makes it easier to collect the adsorbents. The current work reports the synthesis of an iron oxide-hydrochar composite (FHC) and an iron oxide-activated hydrochar composite (FAC) through the microwave-assisted hydrothermal carbonization (MHC) technique, which is known as a timesaving and energy-efficient method. The synthesized composites were characterized using various techniques, such as FT-IR, XRD, SEM, TEM, and N2 isotherm. The prepared composites were applied in the adsorption of cationic methylene blue dye (MB). The composites were formed of crystalline iron oxide and amorphous hydrochar, with a porous structure for the hydrochar and a rod-like structure for the iron oxide. The pH of the point of zero charge (pHpzc) of the iron oxide-hydrochar composite and the iron oxide-activated hydrochar composite were 5.3 and 5.6, respectively. Approximately 556 mg and 50 mg of MB dye was adsorbed on the surface of 1 g of the FHC and FAC, respectively, according to the maximum adsorption capacity calculated using the Langmuir model.

Renewable Carbon Materials as Electrodes for High-Performance Supercapacitors: From Marine Biowaste to High Specific Surface Area Porous Biocarbons

Waste, in particular, biowaste, can be a valuable source of novel carbon materials. Renewable carbon materials, such as biomass-derived carbons, have gained significant attention recently as potential electrode materials for various electrochemical devices, including batteries and supercapacitors. The importance of renewable carbon materials as electrodes can be attributed to their sustainability, low cost, high purity, high surface area, and tailored properties. Fish waste recovered from the fish processing industry can be used for energy applications and prioritizing the circular economy principles. Herein, a method is proposed to prepare a high surface area biocarbon from glycogen extracted from mussel cooking wastewater. The biocarbon materials were characterized using a Brunauer-Emmett-Teller surface area analyzer to determine the specific surface area and pore size and by scanning electron microscopy coupled with energy-dispersive X-ray analysis, Raman analysis, attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The electrochemical characterization was performed using a three-electrode system, utilizing a choline chloride-based deep eutectic solvent (DES) as an eco-friendly and sustainable electrolyte. Optimal time and temperature allowed the preparation of glycogen-based carbon materials, with a specific surface area of 1526 m² g^-1, a pore volume of 0.38 cm³ g^-1, and an associated specific capacitance of 657 F g^-1 at a current density of 1 A g^-1, at 30 °C. The optimal material was scaled up to a two-electrode supercapacitor using a DES-based solid-state electrolyte (SSE@DES). This prototype delivered a maximum capacitance of 703 F g^-1 at a 1 A g^-1 of current density, showing 75% capacitance retention over 1000 cycles, delivering the highest energy density of 0.335 W h kg^-1 and power density of 1341 W kg^-1. Marine waste can be a sustainable source for producing nanoporous carbon materials to be incorporated as electrode materials in energy storage devices.

Phytotoxicity and genotoxicity of agro-industrial digested sludge hydrochar: The role of heavy metals

Hydrochar is a new carbonaceous product obtained via hydrothermal carbonization of wet biomass, such as sludges or digested sludges, which often have disposal problems, also due to the presence of contaminants such as heavy metals. The properties of the hydrochar led to an interest in using it as an amendment, but the agro-environmental properties must be considered for its safe use. Raw hydrochar produced by agro-industrial digestate and relative three acidic post-treated hydrochars (for heavy metals removal) have been assessed considering their effect on phytotoxicity, soil, plant growth, mutagenicity, and genotoxicity. The chemical characterization showed the effect of post-treatment on heavy metals contents reduction, except for Cu content (hydrochar, 650 mg/kg; post-treated hydrochars, 940 mg/kg, 287 mg/kg, and 420 mg/kg). The acidic post-treatment also reduces the phytotoxicity compared to raw hydrochar (the germination index at 16 % of hydrochar concentration was: hydrochar, 61.48 %; post-treated hydrochars, 82.27 %, 58.28 %, and 82.26 %), but the low pH and the impact on N-cycle probably have caused the detrimental effect on plant growth of post-treated hydrochar. No mutagenic activity was observed in bacteria using Ames test, while all the samples induced chromosomal aberrations in plant cells (Allium cepa test). The approach adopted, which considers phytotoxicity, plant growth-soil effects, and mutagenicity/genotoxicity bioassays has been proven effective for a proper evaluation of organic products derived from waste to promote a sustainable and circular recovery of materials.

Chitins from Seafood Waste as Sustainable Porous Carbon Precursors for the Development of Eco-Friendly Supercapacitors

Carbon materials derived from marine waste have been drawing attention for supercapacitor applications. In this work, chitins from squid and prawn marine wastes were used as carbon precursors for further application as electrodes for energy storage devices. Chitins were obtained through a deproteinization method based on enzymatic hydrolysis as an alternative to chemical hydrolysis as commonly presented in the literature. The obtained porous carbons were characterized using a BET surface area analyzer to determine the specific surface area and pore size, as well as scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), Raman spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), to characterize their morphology, composition, and structure. The electrochemical characterization was performed using a glassy carbon (GC) electrode modified with marine waste-based porous carbons as the working electrode through cyclic voltammetry and galvanostatic charge/discharge using ethaline, a choline chloride-based deep eutectic solvent (DES), as an eco-friendly and sustainable electrolyte. Squid and prawn chitin-based carbons presented a surface area of 149.3 m² g^-1 and 85.0 m² g^-1, pore volume of 0.053 cm³ g^-1 and 0.029 cm³ g^-1, and an associated specific capacitance of 20 and 15 F g^-1 at 1 A g^-1, respectively. Preliminary studies were performed to understand the effect of -OH groups on the chitin-based carbon surface with DES as an electrolyte, as well as the effect of aqueous electrolytes (1 mol L^-1 sulphuric acid (H₂SO₄) and 1 mol L^-1 potassium hydroxide (KOH)) on the capacitance and retention of the half-cell set up. It is provided, for the first time, the use of chitin-based carbon materials obtained through a one-step carbonization process combined with an eco-friendly DES electrolyte for potential application in energy storage devices.

Concept for the valorization of cereal processing waste: Recovery of phenolic acids by using waste-derived tetrahydrofurfuryl alcohol and biochar

Valorization of agro-food waste by converting it into a renewable resource plays a crucial role in a bio-based circular economy. Therefore, this study was designed to evaluate the suitability of distillery stillage (DS), which comes from alcohol production from cereals, for producing value-added products that can be used synergistically. The main objective was to investigate the usefulness of two substances for the recovery of phenolic acids, which have antioxidant activity, from the liquid fraction of DS: namely, tetrahydrofurfuryl alcohol (THFA) as a solvent and biochar as an adsorbent, both produced from the solid fraction of cereal processing waste. The effect of THFA concentration (80 and 100%) on phenolic acid yield in ultrasound-assisted extraction was studied. The solubilization predictions of phenolic compounds by the Hansen solubility parameters were in accordance with the experimental results: the yield of phenolic acids in the extracts was highest (3.76 μg g^-1 dry mass) with 80% THFA. Among the extracted phenolic acids, hydroxycinnamic acids predominated over hydroxybenzoic acids, which may affect the bioactive properties of the extracts and their future applications for industrial purposes. Phenolic acids from the extracts were adsorbed on 17-170 g biochar L^-1 and desorbed into water at 40-60 °C. The phenolic acid recovery was highest (∼92%) when the biochar dose was 85 g L^-1 and when desorption was performed at 50 °C. After adsorption/desorption, ∼95% of the antioxidant activity of the phenolic acids in the extracts was maintained. As biochar has a smaller specific surface area than commercial powdered activated carbon (PAC), the biochar dose should be about 5 times higher than an equivalent PAC dose for adsorption efficiency above 90%.

Biomass-Based Hydrothermal Carbons for the Contaminants Removal of Wastewater: A Mini-Review

The preparation of adsorbents with eco-friendly and high-efficiency characteristics is an important approach for pollutant removal, and can relieve the pressure of water shortage and environmental pollution. In recent studies, much attention has been paid to the potential of hydrothermal carbonization (HTC) from biomass, such as cellulose, hemicellulose, lignin, and agricultural waste for the preparation of adsorbents. Hereby, this paper summarizes the state of research on carbon adsorbents developed from various sources with HTC. The reaction mechanism of HTC, the different products, the modification of hydrochar to obtain activated carbon, and the treatment of heavy metal pollution and organic dyes from wastewater are reviewed. The maximum adsorption capacity of carbon from different biomass sources was also evaluated.

Recent advances in lignocellulosic and algal biomass pretreatment and its biorefinery approaches for biochemicals and bioenergy conversion

As the global demand for sustainable energy increases, lignocellulosic (such as agricultural residues, forest biomass, municipal waste, and dedicated energy crops) and algal (including macroalgae and microalgae) biomass have attracted considerable attention, because of their high availability of carbohydrates. This is a potential feedstock to produce biochemical and bioenergy. Pretreatment of biomass can disrupt their complex structure, increasing conversion efficiency and product yield. Therefore, this review comprehensively discusses recent advances in different pretreatments (physical, chemical, physicochemical, and biological pretreatments) for lignocellulosic and algal biomass and their biorefining methods. Life cycle assessment (LCA) which enables the quantification of the environmental impact assessment of a biorefinery also be introduced. Biorefinery processes such as raw material acquisition, extraction, production, waste accumulation, and waste conversion are all monitored under this concept. Nevertheless, there still exist some techno-economic barriers during biorefinery and extensive research is still needed to develop cost-effective processes.

Development of a Continuous Hydrothermal Treatment Process for Efficient Dewatering of Industrial Wastewater Sludge

Sludges from the papermaking industry represent a challenging residue stream that is difficult to dewater using conventional processes. The successful development and scale-up of innovative processes from lab- to pilot- to industrial-scale are required to tackle challenges for waste treatment, including paper sludges. Biological paper sludge was treated via a mild hydrothermal carbonization process (TORWASH®) to improve dewaterability of the sludge, including long-duration, continuous testing. Initial lab-scale experiments indicated the optimal treatment temperature for sludge dewatering was 190 °C. Dewaterability improved with increasing temperature, but the obtained solid yield decreased. Scaling-up to a continuous flow pilot plant required a temperature of 200 °C to achieve optimum dewatering. Pilot-scale hydrothermal treatment and dewatering resulted in solid cakes with an average dry matter content of 38% and a solid yield of 39%. This study demonstrates the benefits of hydrothermal carbonization for the dewatering of biological paper sludge without the use of dewatering aids such as fiber sludge or polyelectrolytes. The results also demonstrate the successful adaptation of a lab-scale batch process to a pilot-scale continuous flow process for hydrothermal carbonization of industrial wastewater sludge.

Effect of Acidic Hydrochar on Plastic Crude Oil Produced from Hydrothermal Liquefaction of Waste PVC

In this study, the effect of hydrothermal liquefaction (HTL) of waste PVC was investigated in the presence of acidic hydrochar. The hydrochar was prepared by hydrothermal carbonization of pineapple waste at 250 °C and at 1 h in the presence of citric acid. Hydrochar was acidic, stable, and porous and contained acidic functional groups. Hydrochar was co-fed with PVC during HTL to enhance HTL conversion and quality of the plastic crude oil. HTL experiments were performed at 300–350 °C, 0.25–4 h of reaction times, and 0–20 wt% hydrochar-to-PVC ratio. The plastic crude oil was separated from the solid residue to evaluate HTL conversion and to analyze elemental compositions, boiling point distribution, alteration of chemical bonds, and chemical compositions. The results showed that acidic hydrochar enhances HTL conversion with a maximum value of 28.75 at 5 wt% hydrochar content at 350 °C and 0.5 h. Furthermore, plastic crude oils contained no chloride but contained significantly high carbon and hydrogen, resulting in a higher heating value of up to 36.43 MJ/kg. The major component of the plastic crude oil was 3, 5 dimethylphenol produced ranging from 61.4 to 86.4% (percentage of total identified area) according to gas chromatography mass spectroscopy (GCMS) data.

Analysis of Hydrothermal Solid Fuel Characteristics Using Waste Wood and Verification of Scalability through a Pilot Plant

Increases in energy demand and waste are a major cause of natural resource depletion and environmental pollution, and technology capable of processing waste to convert it into energy is required to mitigate this issue. Hydrothermal carbonization (HTC) is an example of this technology that can convert waste into energy, and various studies have been conducted using it for fuel conversion. This study focused on the production of a solid fuel equivalent to coal for power generation through HTC processes using waste wood. Unlike previous work, which consists only of laboratory-scale HTC experiments, we confirmed scalability through pilot-scale HTC experiments. Overall, it was possible to convert waste wood into HTC solid fuel with a calorific value of over 27,000 kJ/kg through the pilot plant HTC process. Additionally, heavy metal and hazardous substance analyses proved that it can be used as a biosolid fuel.

Hydrothermal carbonization of food waste as sustainable energy conversion path

Every day, a large amount of food waste (FW) is released into the environment, causing financial loss and unpredictable consequences in the world, highlighting the urgency of finding a suitable approach to treating FW. As moisture content makes up 75% of the FW, hydrothermal carbonization (HTC) is a beneficial process for the treatment of FW since it does not require extensive drying. Moreover, the process is considered favorable for carbon sequestration to mitigate climate change in comparison with other processes because the majority of the carbon in FW is integrated into hydrochar. In this work, the reaction mechanism and factors affecting the HTC of FW are scrutinized. Moreover, the physicochemical properties of products after the HTC of FW are critically presented. In general, HTC of FW is considered a promising approach aiming to attain simultaneously-two core benefits on economy and energy in the sustainable development strategy.

Walnut Shell Biowaste Valorization via HTC Process for the Removal of Some Emerging Pharmaceutical Pollutants from Aqueous Solutions

This research emphasizes the performance of some eco-friendly carbon materials as hydrochars (HC) obtained by the hydrothermal carbonization (HTC) process applied to walnut shell (WS) biowaste. These materials display promising properties that can be used for environmental applications such as emerging pharmaceutical pollutant retention from water sources. Thus, three hydrochars coded HCWS1, HCWS2, and HCWS3 were obtained using a dynamic autoclave in specific conditions—temperature of 220 °C, autogenous pressure, 1:10 biomass–water weight ratio—and for three different reaction times, 1 h, 6 h, and 12 h. The HCWSs were characterized by means of ATR-FTIR and SEM-EDS analyses and tested as possible adsorbents to assess the removal efficiencies of some emerging pharmaceutical pollutants (paracetamol and methylene blue) by UV–VIS spectrophotometry. Kinetic and adsorption studies were carried out. The best results were obtained for the HCWS3 hydrochar. Further perspectives include an activation step of the hydrochars and their testing on other emerging pharmaceutical pollutants.

Hydrothermal Carbonization

Over the past decade, hydrothermal carbonization (HTC) has emerged as a promising thermochemical pathway for treating and converting wet wastes into fuel, materials, and chemicals [...]

Environmental Life Cycle Assessment of Hydrothermal Carbonization of Sewage Sludge and Its Products Valorization Pathways

ABSTRACT

This study is aimed at evaluating through Life Cycle Assessment (LCA) the environmental performances of an integrated system of an existing Water Resources Recovery Facility (WRRF) and a hypothetical hydrothermal carbonization (HTC) plant applied to the generated sewage sludge (SS). Beside the valorisation of the solid product (hydrochar, HC) as a fuel substituting lignite, the possibility to valorize also the liquid fraction (process water, PW) derived by the HTC, by anaerobic digestion to produce biogas, is here proposed and analysed. Additionally, phosphorus recovery from HC, prior its use, by acid leaching with nitric acid is also suggested and evaluated. Thus, four integrated scenarios, based on SS carbonization, are proposed and compared with the current SS treatment, based on composting outside of the WRRF (Benchmark scenario). The proposed scenarios, based on HTC, show improved performances with respect to the benchmark one, for thirteen of sixteen considered impact indicators. For the Climate Change (CC) indicator, the two HTC scenarios are able to reduce the impacts up to - 98%, with respect to the Benchmark. Further, the introduction of anaerobic digestion of PW proves to reduce impacts more than other configurations in eleven on sixteen impact categories. On the contrary, the introduction of phosphorus recovery process negatively affects the values for most of indicators. Thus, possible solutions to improve the integration of this process are outlined (e.g., the use of sulfuric acid instead of nitric one, or the application of a different ratio between solid and acidified solution during acid leaching of HC to recover phosphorus).

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s12649-022-01821-x.

Carbon-based catalyst for environmental bioremediation and sustainability: Updates and perspectives on techno-economics and life cycle assessment

Global rise in the generation of waste has caused an enormous environmental concern and waste management problem. The untreated carbon rich waste serves as a breeding ground for pathogens and thus strategies for production of carbon rich biochar from waste by employing different thermochemical routes namely hydrothermal carbonization, hydrothermal liquefaction and pyrolysis has been of interest by researchers globally. Biochar has been globally produced due to its diverse applications from environmental bioremediation to energy storage. Also, several factors affect the production of biochar including feedstock/biomass type, moisture content, heating rate, and temperature. Recently the application of biochar has increased tremendously owing to the cost effectiveness and eco-friendly nature. Thus this communication summarized and highlights the preferred feedstock for optimized biochar yield along with the factor influencing the production. This review provides a close view on biochar activation approaches and synthesis techniques. The application of biochar in environmental remediation, composting, as a catalyst, and in energy storage has been reviewed. These informative findings were supported with an overview of lifecycle and techno-economical assessments in the production of these carbon based catalysts. Integrated closed loop approaches towards biochar generation with lesser/zero landfill waste for safeguarding the environment has also been discussed. Lastly the research gaps were identified and the future perspectives have been elucidated.

The zebrafish (Danio rerio) embryo-larval contact assay combined with biochemical biomarkers and swimming performance in sewage sludge and hydrochar hazard assessment

Hydrothermal carbonization is considered a powerful technology to convert sewage sludge (SS) into a valuable carbonaceous solid known as hydrochar (HC). Up to now criteria for landfill application of SS and HC are based only on physicochemical properties and levels of pollutant residues. Nevertheless, to ensure their safe environmental applications it is mandatory to develop biosensors which can provide relevant information on their toxic potential for natural ecosystems. Therefore, this study aimed to assess the suitability of a contact assay using zebrafish embryo/larvae combined with sub-lethal end-points to evaluate the hazard associated with SS and related HC exposure. A suite of biomarkers was also applied on larvae, related to detoxification and oxidative stress as the activity of Ethoxyresorufin-O-deethylase, glutathione-S-transferase, and catalase, the content of reactive oxygen species and the behavioral assay using the DanioVision™ chamber. Legacy priority pollutants were also measured either in SS and HC tested samples and in contact waters. The exposure to SS caused higher lethality compared to HC. No significant changes in the activity of oxidative stress markers was observed upon exposure to both matrices. The behavioral test showed a hypoactivity condition in larvae exposed to both SS and HC with the effects of SS stronger than HC. Chemical analysis revealed the presence of trace elements and halogenated compounds in either SS, HC. Heavy metals were also released in contact waters, while volatile hydrocarbons (C6-C10) and halogenated compounds resulted below LOD (<0.05 μ L^-1). Our study highlights the suitability of zebrafish embryotoxicity test, coupled with behavioral traits, as screening tool for assessing potential risks, associated with the landfill application of both SS and HC, for aquatic wildlife.

Hydrothermal Treatment of Residual Forest Wood (Softwood) and Digestate from Anaerobic Digestion—Influence of Temperature and Holding Time on the Characteristics of the Solid and Liquid Products

Hydrothermal treatment (HTT) offers the potential to upgrade low-value biomass such as digestate (DG) or forest residue (FR) by producing solids and liquids for material use or energetic utilization. In this study, microwave-assisted HTT experiments with DG and FR as feedstocks were executed at different temperatures (130, 150, 170 °C) and with different holding times (30, 60, 90 min) to determine the influences on product properties (ash and elemental concentrations, calorific values and chemical compounds). In general, DG and FR reacted differently to HTT. For the DG solids, for instance, the ash concentration was reduced to 8.68%DM at 130 °C (initially 27.67%DM), and the higher heating value increased from 16.55 MJ/kgDM to 20.82 MJ/kgDM at 170 °C, while the FR solids were affected only marginally. Elements with importance for emissions in combustion were leached out in both HTT solids. The DG and FR liquids contained different chemical compounds, and the temperature or holding time affected their formation. Depending on the designated application of HTT, less severe conditions can deliver better results. It was demonstrated that different low-temperature HTT conditions already induce strong changes in the product qualities of DG and FR. Optimized interactions between process parameters (temperature, holding time and feedstock) might lead to better cost–benefit effects in HTT.

Quality of Hydrochar from Wine Sludge under Variable Conditions of Hydrothermal Carbonization: The Case of Lesvos Island

Lesvos island has several food and beverage production industries and the valorization of their waste has been an unexplored task. The focus of this study is the valorization of wine sludge which is a very interesting waste stream due to the high phenolic content. This study identified all the operating wineries on the island and sampled local wine sludge. Hydrothermal carbonization (HTC) was utilized for the valorization of wine sludge and the production of hydrochar and liquid HTC liquor. The experiments had a residence time of 24 h and were performed at 200 °C. Except the uniqueness of wine sludge as a utilized material, this study performed HTC under different pressure regimes that were developed by different filling percentages of the reactor, i.e., 24–48%. The different pressure regimes influenced the measured parameters of both the liquid and the solid products of HTC. The Chemical Oxygen Demand (COD) ranged between 230 and 280 g/L with the maximum reduction was observed at a filling percentage of 32%. At the same time, lower filling percentages favored the total phenolic content (max value: 21 g/L) and higher filling percentages favored the Higher Heating Value (HHV) of the hydrochar (max value: 20.36 MJ/Kg) and the produced mass yield of hydrochar (max value: 234.3 mg). For all cases, low pH values were measured on the liquid fraction and this can be attributed to the presence of organic acids. Future work will focus on the characterization of the specific phenolic content of the liquid fraction.

Aryl hydrocarbon reporter gene bioassay for screening polyhalogenated dibenzo-p-dioxins/furans and dioxin-like polychlorinated biphenyls in hydrochar and sewage sludge

The suitability of the AhR reporter gene bioassays to screen the presence of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in sewage sludge (SL) and related hydrochar (HC) was here investigated. Samples of SL obtained from six WWTPs were processed by hydrothermal carbonization to obtain the resultant HCs and both tested with DR-CALUX® bioassay. Levels of PCDD/Fs and dl-PCBs were also determined analytically in the same samples by GC-MS/MS. Bioanalytical Toxicity Equivalent values (BEQ) resulted in one order of magnitude higher in HC compared to SL samples and those obtained from the dl-PCBs fraction higher than those from PCDD/Fs. BEQ and TEQ_WHO values, the latter obtained by GC-MS/MS analysis on the same matrices, were highly correlated showing also a similar trend in the six WWTPs (R_S= 0.8252, p < 0.001; Pearson's R R_P =0.8029, p < 0.01). The suitability of AhR bioassays and in particular of the DR-CALUX® to screen the presence and biological activity of legacy organohalogen compounds in both SL and HC matrices was demonstrated for the first time which support their usage for the assessment of potential risks associated with their further environmental applications.

Integration of Waste to Bioenergy Conversion Systems: A Critical Review

Sustainable biofuel production is the most effective way to mitigate greenhouse gas emissions associated with fossil fuels while preserving food security and land use. In addition to producing bioenergy, waste biorefineries can be incorporated into the waste management system to solve the future challenges of waste disposal. Biomass waste, on the other hand, is regarded as a low-quality biorefinery feedstock with a wide range of compositions and seasonal variability. In light of these factors, biomass waste presents limitations on the conversion technologies available for value addition, and therefore more research is needed to enhance the profitability of waste biorefineries. Perhaps, to keep waste biorefineries economically and environmentally sustainable, bioprocesses need to be integrated to process a wide range of biomass resources and yield a diverse range of bioenergy products. To achieve optimal integration, the classification of biomass wastes to match the available bioprocesses is vital, as it minimizes unnecessary processes that may increase the production costs of the biorefinery. Based on biomass classification, this study discusses the suitability of the commonly used waste-to-energy conversion methods and the creation of integrated biorefineries. In this study, the integration of waste biorefineries is discussed through the integration of feedstocks, processes, platforms, and the symbiosis of wastes and byproducts. This review seeks to conceptualize a framework for identifying and integrating waste-to-energy technologies for the varioussets of biomass wastes.

Introduction of a Zn-based metal-organic framework @ biomass porous activated carbon as a high-sensitive coating for a stainless steel SPME fiber: application to the simultaneous analysis of nonsteroidal anti-inflammatory drugs

The present study introduces a high-efficiency nanocomposite material featuring a zinc-based metal-organic framework and a novel porous activated carbon derived from bread waste. The prepared nanocomposite, namely Zn-MOF-5@BHPAC, has been synthesized by a low-temperature hydrothermal process and coated onto the surface of a stainless steel wire with epoxy glue. The fabricated fiber has been employed as an SPME fiber applied in the extraction and pre-concentration of some nonsteroidal anti-inflammatory drugs (NSAIDs) before their high-performance liquid chromatography-ultraviolet (HPLC-UV) studies. The characterization studies were performed utilizing field emission scanning electron microscopy, elemental mapping, energy-dispersive X-ray spectroscopy, elemental analyzer, Fourier-transform infrared spectroscopy, and Brunauer-Emmett-Teller surface area analysis. Under the optimal conditions, the method demonstrated low detection limits (LODs, 0.06-0.15 µg L-1), wide linear ranges (LRs, 0.20-380 µg L-1) with good linearity (R2 > 0.991), good precisions (RSDs < 6.95%), and acceptable relative recoveries (RR > 85%). Using the green and affordable biomass of bread as a novel carbon-rich source is an innovative idea provided in this study. In addition, the hybridization of the obtained carbon-based material with the MOF compound to create a new high-capacity sorbent is another strength of the proposed method. Long service lifetime, economic efficiency, environmental friendliness, and high extraction capability were some of the other advantages of the suggested procedure. Therefore, the method can utilize successfully for the simultaneous determination of NSAIDs (as model analytes) in different matrixes.

A Review of the Sustainable Utilization of Rice Residues for Bioenergy Conversion Using Different Valorization Techniques, Their Challenges, and Techno-Economic Assessment

The impetus to predicting future biomass consumption focuses on sustainable energy, which concerns the non-renewable nature of fossil fuels and the environmental challenges associated with fossil fuel burning. However, the production of rice residue in the form of rice husk (RH) and rice straw (RS) has brought an array of benefits, including its utilization as biofuel to augment or replace fossil fuel. Rice residue characterization, valorization, and techno-economic analysis require a comprehensive review to maximize its inherent energy conversion potential. Therefore, the focus of this review is on the assessment of rice residue characterization, valorization approaches, pre-treatment limitations, and techno-economic analyses that yield a better biofuel to adapt to current and future energy demand. The pre-treatment methods are also discussed through torrefaction, briquetting, pelletization and hydrothermal carbonization. The review also covers the limitations of rice residue utilization, as well as the phase structure of thermochemical and biochemical processes. The paper concludes that rice residue is a preferable sustainable biomass option for both economic and environmental growth.

Recent Advancements in the Synthesis and Application of Carbon-Based Catalysts in the ORR

Fuel cells are a promising alternative to non-renewable energy production industries such as petroleum and natural gas. The cathodic oxygen reduction reaction (ORR), which makes fuel cell technology possible, is sluggish under normal conditions. Thus, catalysts must be used to allow fuel cells to operate efficiently. Traditionally, platinum (Pt) catalysts are often utilized as they exhibit a highly efficient ORR with low overpotential values. However, Pt is an expensive and precious metal, posing economic problems for commercialization. Herein, advances in carbon-based catalysts are reviewed for their application in ORRs due to their abundance and low-cost syntheses. Various synthetic methods from different renewable sources are presented, and their catalytic properties are compared. Likewise, the effects of heteroatom and non-precious metal doping, surface area, and porosity on their performance are investigated. Carbon-based support materials are discussed in relation to their physical properties and the subsequent effect on Pt ORR performance. Lastly, advances in fuel cell electrolytes for various fuel cell types are presented. This review aims to provide valuable insight into current challenges in fuel cell performance and how they can be overcome using carbon-based materials and next generation electrolytes.

Valorization of winery and distillery by-products by hydrothermal carbonization

This work aims at finding an alternative strategy to manage the waste generated by the winemaking industry to obtain a solid biofuel and phenolic compounds. The effect of temperature (180-260 °C), residence time (1-7 h), and biomass-to-liquid ratio (0.05-0.25) on the co-hydrothermal carbonization of vine pruning and exhausted grape pomace, by using vinasse as moisture source, is studied. The effect of the variables is investigated and optimized using the Box-Behnken design of response surface methodology to maximize mass yield, fuel ratio, energy densification yield and phenols extraction yield and to minimize energy consumption. The statistical analysis shows that the carbonization temperature is a crucial parameter of the process, decreasing the product yield on one hand and improving the quality of hydrochar on the other. At the optimal conditions (246.3 °C, 1.6 h, 0.066), an hydrochar yield of 52.64% and a calorific value of 24.1 MJ/kg were obtained. Moreover, the analysis of the H/C and O/C ratios of hydrochars demonstrates that carbonisation significantly improves the fuel properties of solid biofuel. Liquid by-products obtained from the HTC process are found to contain high concentrations of organic matter but the BOD/COD ratios suggest their potential valorization by biological methods.

Evaluation of the aerobic biodegradability of process water produced by hydrothermal carbonization and inhibition effects on the heterotrophic biomass of an activated sludge system

In this work, the aerobic biodegradability of the process water (PW) produced by hydrothermal carbonization (HTC) of dewatered anaerobic digested sludge and the toxicity assessment in regard to the heterotrophic activated biomass of a conventional activated sludge systems, are described. Such assessments are not yet reported in other scientific papers, so this paper seeks to contribute to the increase of knowledge regarding the valorization of the HTC process applied in a wastewater treatment plant (WWTP). For such purpose, two different respirometric techniques were applied - multi-OUR respirometry and manometric respirometry. PW resulted highly biodegradable: 83% of total COD was biodegradable, with a 58% of readily biodegradable (rbCOD) fraction. The BOD₅/COD ratio was 0.42. Further, it was characterized by a high concentration of volatile fatty acids (VFAs) (i.e. 2031 mg/L), of which the major constituent was acetic acid (i.e. 80%), an easily degradable intermediate of many biological processes. Both the respirometric techniques showed that the assessed PW, after being diluted accordingly with the WWTP real operational conditions, did not imply short-term toxic effects on the activated sludge, neither using fresh biomass nor keeping the same one. According to these results, the recirculation of PW at the water line of WWTPs represents a promising approach not affected by specific toxicity issues, especially when the HTC process is integrated into a WWTP scheme.

Surface Modified Activated Carbons: Sustainable Bio-Based Materials for Environmental Remediation

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly in developing countries. The burning of agricultural byproducts causes global warming, whereas their improper waste management causes water/air pollution. The conversion of these waste materials into effective smart materials can be considered as a promising strategy in waste management and environmental remediation. Over the past decades, activated carbons (ACs) have been prepared from various agricultural wastes and extensively used as adsorbents. The adsorption capacity of ACs is linked to a well-developed porous structure, large specific surface area, and rich surface functional moieties. Activated carbon needs to increase their adsorption capacity, especially for specific adsorbates, making them suitable for specific applications, and this is possible by surface modifications of their surface chemistry. The modifications of surface chemistry involve the introduction of surface functional groups which can be carried out by various methods such as acid treatment, alkaline treatment, impregnation, ozone treatment, plasma treatment, and so on. Depending on the treatment methods, surface modification mainly affects surface chemistry. In this review, we summarized several modification methods for agricultural-waste-based ACs. In addition, the applications of AC for the adsorption of various pollutants are highlighted.

Trends in renewable energy production employing biomass-based biochar

Tremendous population growth and industrialization have increased energy consumption unprecedentedly. The depletion of fossil-based energy supplies necessitates the exploration of solar, geothermal, wind, hydrogen, biodiesel, etc. as a clean and renewable energy source. Most of these energy sources are intermittent, while bioelectricity, biodiesel, and biohydrogen can be produced using abundantly available organic wastes regularly. The production of various energy resources requires materials that are costly and affect the applicability at a large scale. Biomass-derived materials (biochar) are getting attention in the field of bioenergy due to their simple method of synthesis, high surface area, porosity, and availability of functional groups for easy modification. Biochar synthesis using various techniques is discussed and their use as an electrode (anodic/cathodic) in a microbial fuel cell (MFC), catalysts in transesterification, and anaerobic digestion for energy production are reviewed. Renewable energy production using biochar would be a sustainable approach to create an energy secure world.

Improving nutrients removal and energy recovery from wastes using hydrochar

Hydrothermal carbonization (HTC) is an eco-friendly, flexible and efficient way to valorise wet solid wastes, producing a carbon-rich material named as hydrochar. Considerable efforts have been devoted to studying the feasibility of using hydrochar in waste management to achieve the goal of circular economy. However, a comprehensive evaluation of the impacts of hydrochar on energy recovery from anaerobic digestion (AD), nutrient reclamation, and wastewater treatment is currently lacking. To understand the influence of hydrochar type on its application, this review will firstly introduce the mechanisms and biomass treatment for hydrochar preparation. Most recent studies regarding the improvement of methane (CH₄) and volatile fatty acids (VFAs) production after dosing hydrochar in anaerobic digesters are quantitatively summarized and deeply discussed. The potential of using various hydrochar as slow-fertilizer to support the growth of plants are analysed by providing quantitative data. The usage of hydrochar in remediating pollutants from wastewater as effective adsorbent is also evaluated. Based on the review, we also address the challenges and demonstrate the opportunities for the future application of hydrochar in waste management. Conclusively, this review will not only provide a systematic understanding of the up-to-date developments of improving the nutrients removal and energy recovery from wastes by using hydrochar but also several new directions for the application of hydrochar in the future.

Industrial-Scale Hydrothermal Carbonization of Agro-Industrial Digested Sludge: Filterability Enhancement and Phosphorus Recovery

Hydrothermal carbonization (HTC) provides an attractive alternative method for the treatment of high-moisture waste and, in particular, digested sludge. HTC could reduce the costs and environmental risks associated with sludge handling and management. Although it is recognized that the dewaterability of hydrochars produced from digested sludge, even at mild temperatures (180–190 °C), is highly improved with respect to the starting material, the filterability of HTC slurries for the recovery of the solid material (hydrochar) still represents a challenge. This study presents the results of an investigation into the filterability of agro-industrial digested sludge HTC slurries produced by a C-700 CarboremTM HTC industrial-scale plant. The filterability of HTC slurries, produced at 190 °C for 1 h, with the use of acid solutions of hydrochloric acid, sulfuric acid or citric acids, was investigated by using a semi-industrial filter press. The use of sulfuric acid or citric acid solutions, in particular, significantly improved the filterability of HTC slurries, reducing the time of filtration and residual moisture content. The acid treatment also promoted the migration of heavy metals and phosphorus (P) in the HTC filtrate solution. This study demonstrates that P can be recovered via the precipitation of struvite in high yields, recovering up to 85 wt% by mass of its initial P content.

Cascade Membrane System for Separation of Water and Organics from Liquid By-Products of HTC of the Agricultural Digestate—Evaluation of Performance

New regulations aimed at curbing the problem of eutrophication introduce limitations for traditional ways to use the by-product of anaerobic digestion—the digestate. Hydrothermal carbonisation (HTC) can be a viable way to valorise the digestate in an energy-efficient manner and at the same time maximise the synergy in terms of recovery of water, nutrients, followed by more efficient use of the remaining carbon. Additionally, hydrothermal treatment is a feasible way to recirculate recalcitrant process residues. Recirculation to anaerobic digestion enables recovery of a significant part of chemical energy lost in HTC by organics dissolved in the liquid effluent. Recirculating back to the HTC process can enhance nutrient recovery by making process water more acidic. However, such an effect of synergy can be exploited to its full extent only when viable separation techniques are applied to separate organic by-products of HTC and water. The results presented in this study show that using cascade membrane systems (microfiltration (MF) → ultrafiltration (UF) → nanofiltration (NF)), using polymeric membranes, can facilitate such separation. The best results were obtained by conducting sequential treatment of the liquid by-product of HTC in the following membrane sequence: MF 0.2 µm → UF PES 10 → NF NPO30P, which allowed reaching COD removal efficiency of almost 60%.

Integrated Strategies for Household Food Waste Reduction in Bangkok

Urban food waste issues in developing economies have recently attracted the attention of policymakers, practitioners, and academics in the course of implementing the Paris Agreement and the SDGs. In our case study city of Bangkok, Thailand, household food waste generation doubled from 2003 to 2018, with a similar increase in per capita amounts. Using an extensive literature review, statistical models, and a questionnaire survey, the authors clarified factors influencing food waste generation and separation before disposal, and reuse/recycling activity in urban households. Results showed that pre-purchase checks can not only prevent food waste but can also increase the reuse/recycling of food waste. Citizens with higher levels of education and those showing more concern about social issues and global warming are more likely to separate food waste before disposal and to participate in reuse/recycling activities. Finally, this paper proposes a seven-stage action-based model of integrated strategies for improving household food and food waste management to prevent/reduce food waste generation as well as remedy existing policy gaps in Bangkok.

Process Water Recirculation during Hydrothermal Carbonization of Waste Biomass: Current Knowledge and Challenges

Hydrothermal carbonization (HTC) is considered as an efficient and constantly expanding eco-friendly methodology for thermochemical processing of high moisture waste biomass into solid biofuels and valuable carbonaceous materials. However, during HTC, a considerable amount of organics, initially present in the feedstock, are found in the process water (PW). PW recirculation is attracting an increasing interest in the hydrothermal process field as it offers the potential to increase the carbon recovery yield while increasing hydrochar energy density. PW recirculation can be considered as a viable method for the valorization and reuse of the HTC aqueous phase, both by reducing the amount of additional water used for the process and maximizing energy recovery from the HTC liquid residual fraction. In this work, the effects of PW recirculation, for different starting waste biomasses, on the properties of hydrochars and liquid phase products are reviewed. The mechanism of production and evolution of hydrochar during recirculation steps are discussed, highlighting the possible pathways which could enhance energy and carbon recovery. Challenges of PW recirculation are presented and research opportunities proposed, showing how PW recirculation could increase the economic viability of the process while contributing in mitigating environmental impacts.

Obtaining lignocellulosic biomass-based catalysts and their catalytic activity in cellobiose hydrolysis and acetic acid esterification reactions

Global challenges prompt the world to modify its strategies and shift from a fossil-fuel-based economy to a bio-resource-based one with the production of renewable biomass chemicals. Different processes exist that allow the transformation of raw biomass into desirable bio-based products and/or energy. In this work different biochars that were obtained as a by-product from birch chip fast pyrolysis and carbonization were used as is or chemically/physically treated. These sulfonated carbon catalysts were compared to a commercially available sulfonated styrene-divinylbenzene macroreticular resin (Dowex 50W X8). Characterisation (water content and pH value, FTIR, base titration, element analysis and N2 desorption) was done to evaluate the obtained sulfonated biocarbon catalysts. Catalytic activity was tested using cellobiose (CB) hydrolysis and acetic acid esterification. For the catalytic CB hydrolysis, we tested the reaction temperature, time and CB and catalyst mass ratios. The determined optimal conditions were 120 °C and 24 h, with CB and catalyst mass ratio 1 : 5. The highest glucose yield was observed for biochar obtained from the birch chip fast pyrolysis process (BC_Py-H2SO4) - 92% within 24 h for 120 °C. Comparably high glucose yield was observed for biochar that was obtained in birch chip carbonization (BC_Carbon-H2SO4) - 86% within 24 h for 120 °C.

Hydrothermal Carbonization of Lemon Peel Waste: Preliminary Results on the Effects of Temperature during Process Water Recirculation

Hydrothermal carbonization (HTC) is a promising thermochemical pre-treatment to convert waste biomass into solid biofuels. However, the process yields large amounts of organic process water (PW), which must be properly disposed of or reused. In this study, the PW produced from the hydrothermal carbonization of lemon peel waste (LP) was recycled into HTC process of LP with the aim of maximize energy recovery from the aqueous phase while saving water resources and mitigating the overall environmental impact of the process. The effects of HTC temperature on the properties of solid and liquid products were investigated during PW recirculation. Experiments were carried out at three different operating temperatures (180, 220, 250 °C), fixed residence times of 60 min, and solid to liquid load of 20 wt%, on a dry basis. Hydrochars were characterized in terms of proximate analysis and higher heating values while liquid phases were analyzed in terms of pH and total organic carbon content (TOC). PW recirculation led to a solid mass yield increase and the effect was more pronounced at lower HTC temperature. The increase of solid mass yield, after recirculation steps (maximum increase of about 6% at 180 °C), also led to a significant energy yield enhancement. Results showed that PW recirculation is a viable strategy for a reduction of water consumption and further carbon recovery; moreover preliminary results encourage for an in-depth analysis of the effects of the PW recirculation for different biomasses and at various operating conditions.

Characteristics of Black Ginseng (Panax ginseng C.A. Mayer) Production Using Ginseng Stored at Low Temperature after Harvest

Ginseng processing often involves multiple drying and heat treatments. Ginseng is typically processed within one week of harvesting or is stored at low temperatures to prevent spoilage. Black ginseng (BG) is manufactured by repeating the heat treatment and drying process of ginseng several times. We compared the suitability of low-temperature stored ginseng (SG) and harvested ginseng (HG) as the components for black ginseng production. SG and HG were processed into black ginseng and the appearance change, free sugar content, and benzo[a]pyrene (BAP) content were observed. Appearance observations showed the SG to be suitable in terms of quality when heat-treated at a temperature of 95 ℃ or higher. The BAP content of the SG increased significantly as the steaming process was repeated. A maximum BAP concentration of 5.31 ± 1.12 μg/kg was measured in SG steamed from 2 to 5 times, making it unsuitable for processing into BG. SG and HG showed similar trends in the content of sucrose, fructose, and glucose during steaming. This study aimed to facilitate the proper choice of base material to improve the safety of black ginseng by limiting BAP production during processing.

Evaluating the Aqueous Phase From Hydrothermal Carbonization of Cow Manure Digestate as Possible Fertilizer Solution for Plant Growth

Improving the agronomic use of recycled nutrients derived from organic waste is one of the priorities within the measures adopted by the European community to reduce environmental issues but remains an unexplored area of research. This study focused on investigating the possibility of using innovative fertilizer solutions in hydroponic systems for the growth of agricultural plants. To this purpose, a liquid fraction [aqueous hydrothermal carbonization (HTC) liquid (AHL)] derived from HTC of cow manure digestate was chemically characterized (pH, electrical conductivity, mineral elements, and organic compounds such as phytotoxins), diluted with distilled water (1:30, 1:60, and 1:90, v/v) to reduce its potential phytotoxicity, and used to grow hydroponic maize (Zea mays L.) plants instead of the classical full-strength nutrient solution. The results indicated that the dilution ratio 1:30 of the AHL solution maintained a high level of toxicity for the plants (phytotoxic substances, especially Na and alkalinity), inducing the arrest of their growth. Differently, the two other dilution ratios (i.e., 1:60 and 1:90) seemed to considerably limit the levels of toxicity, since they allowed the plants to develop. However, these dilution ratios were poor in nutrient elements, inducing alteration in photosynthesis and an onset of deficiency symptoms such as pronounced leaf chlorosis. In view of an eco-friendly approach, future studies are, therefore, needed to identify the correct species-specific dilution ratio to supply both low levels of phytotoxins and adequate content of essential nutrients for appropriate plant growth and development. Furthermore, in order to lower specific Na phytotoxicity, treatments are of utmost importance before using AHL as a fertilizer solution.

Biochar as an Eco-Friendly and Economical Adsorbent for the Removal of Colorants (Dyes) from Aqueous Environment: A Review

Dyes (colorants) are used in many industrial applications, and effluents of several industries contain toxic dyes. Dyes exhibit toxicity to humans, aquatic organisms, and the environment. Therefore, dyes containing wastewater must be properly treated before discharging to the surrounding water bodies. Among several water treatment technologies, adsorption is the most preferred technique to sequester dyes from water bodies. Many studies have reported the removal of dyes from wastewater using biochar produced from different biomass, e.g., algae and plant biomass, forest, and domestic residues, animal waste, sewage sludge, etc. The aim of this review is to provide an overview of the application of biochar as an eco-friendly and economical adsorbent to remove toxic colorants (dyes) from the aqueous environment. This review highlights the routes of biochar production, such as hydrothermal carbonization, pyrolysis, and hydrothermal liquefaction. Biochar as an adsorbent possesses numerous advantages, such as being eco-friendly, low-cost, and easy to use; various precursors are available in abundance to be converted into biochar, it also has recyclability potential and higher adsorption capacity than other conventional adsorbents. From the literature review, it is clear that biochar is a vital candidate for removal of dyes from wastewater with adsorption capacity of above 80%.