The Role of Ionic Liquids in the Lignin Separation from Lignocellulosic Biomass

Extraction and Depolymerization of Lignin from Different Agricultural and Forestry Wastes to Obtain Building Blocks in a Circular Economy Framework

Large amounts of agri-food waste are generated and discarded annually, but they have the potential to become highly profitable sources of value-added compounds. Many of these are lignin-rich residues. Lignin, one of the most abundant biopolymers in nature, offers numerous possibilities as a raw material or renewable resource for the production of chemical products. This study aims to explore the potential revalorization of agricultural by-products through the extraction of lignin and subsequent depolymerization. Different residues were studied; river cane, rice husks, broccoli stems, wheat straw, and olive stone are investigated (all local wastes that are typically incinerated). Traditional soda extraction, enhanced by ultrasound, is applied, comparing two different sonication methods. The extraction yields from different residues were as follows: river cane (28.21%), rice husks (24.27%), broccoli (6.48%), wheat straw (17.66%), and olive stones (24.29%). Once lignin is extracted, depolymerization is performed by three different methods: high-pressure reactor, ultrasound-assisted solvent depolymerization, and microwave solvolysis. As a result, a new microwave depolymerization method has been developed and patented, using for the first time graphene nanoplatelets (GNPs) as new promising carbonaceous catalyst, achieving a 90.89% depolymerization rate of river cane lignin and yielding several building blocks, including guaiacol, vanillin, ferulic acid, or acetovanillone.

A green pathway for lignin valorization: Enzymatic lignin depolymerization in biocompatible ionic liquids and deep eutectic solvents

Lignin depolymerization, which enables the breakdown of a complex and heterogeneous aromatic polymer into relatively uniform derivatives, serves as a critical process in valorization of lignin. Enzymatic lignin depolymerization has become a promising biological strategy to overcome the heterogeneity of lignin, due to its mild reaction conditions and high specificity. However, the low solubility of lignin compounds in aqueous environments prevents efficient lignin depolymerization by lignin-degrading enzymes. The employment of biocompatible ionic liquids (ILs) and deep eutectic solvents (DESs) in lignin fractionation has created a promising pathway to enzymatically depolymerize lignin within these green solvents to increase lignin solubility. In this review, recent research progress on enzymatic lignin depolymerization, particularly in a consolidated process involving ILs/DESs is summarized. In addition, the interactions between lignin-degrading enzymes and solvent systems are explored, and potential protein engineering methodology to improve the performance of lignin-degrading enzymes is discussed. Consolidation of enzymatic lignin depolymerization and biocompatible ILs/DESs paves a sustainable, efficient, and synergistic way to convert lignin into value-added products.

Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.

Lignin Extraction by Using Two-Step Fractionation: A Review

Lignocellulosic biomass represents the most abundant renewable carbon source on earth and is already used for energy and biofuel production. The pivotal step in the conversion process involving lignocellulosic biomass is pretreatment, which aims to disrupt the lignocellulose matrix. For effective pretreatment, a comprehensive understanding of the intricate structure of lignocellulose and its compositional properties during component disintegration and subsequent conversion is essential. The presence of lignin-carbohydrate complexes and covalent interactions between them within the lignocellulosic matrix confers a distinctively labile nature to hemicellulose. Meanwhile, the recalcitrant characteristics of lignin pose challenges in the fractionation process, particularly during delignification. Delignification is a critical step that directly impacts the purity of lignin and facilitates the breakdown of bonds involving lignin and lignin-carbohydrate complexes surrounding cellulose. This article discusses a two-step fractionation approach for efficient lignin extraction, providing viable paths for lignin-based valorization described in the literature. This approach allows for the creation of individual process streams for each component, tailored to extract their corresponding compounds.

From Hemp Waste to Bioactive Nanofiber Composites: Deep Eutectic Solvents and Electrospinning in Upcycling Endeavors

Natural fibers have attracted increasing interest as an alternative to produce environmentally friendly and sustainable materials. Particularly, hemp fibers have been widely used in various industrial applications due to their extremely unique properties. However, hemp can generate a large amount of agro-waste, and it results in an attractive source of biopolymers for the development of low-cost materials as an alternative to the raw materials and conventional petroleum-based plastics. In addition, deep eutectic solvents (DESs), a new type of truly green solvents, have been shown to remove gums, lignin, and other non-cellulosic components from hemp fibers. Reusing these components dissolved into the DESs to fabricate new materials directly by electrospinning is a very attractive but still unexplored endeavor. Thus, this innovative research to venture new upcycling pathways is focused on the fabrication of composite nanofibers by electrospinning of a gel-based blend of Poly(vinyl alcohol) (PVA) and hemp agro-waste (HW) dissolved into choline chloride (ChCl):Glycerol (1:2) and ChCl:Urea (1:2) DES mixtures. The results obtained revealed that the produced nanofibers displayed uniform appearance with diameters ranging from 257.7 ± 65.6 nm to 380.8 ± 134.0 nm. In addition, the mechanical properties of the electrospun composite nanofibers produced from the gel-based blends of HW dissolved in DESs and PVA (HW-DESs_PVA) were found to be superior, resulting in an enhanced tensile strength and Young's modulus. Furthermore, the incorporation of HW into the nanofibers was able to provide bioactive antioxidant and antibacterial properties. Overall, this study demonstrated a promising, more sustainable, and eco-friendly way to produce electrospun composite nanofibers using HW in a circular economy perspective.

Alcoholamine enhanced fractionation of cellulose from lignocellulosic biomass in ionic liquids

Ionic liquid based technology is promising in the pretreatment of lignocelluloses. More efforts are still being made to intensify the separation of the main components in this biomass and to inhibit biopolymer degradation, especially in the fabrication of functional materials where excellent mechanical properties are often requisite. In this study, additives with amino and/or hydroxyl groups were proposed to improve the dissolution of lignocellulosic biomass in ionic liquids and to inhibit the degradation of cellulose. Among the tested additives (i.e., urea, L-2-aminobutyric acid, DL-aminopropanol, 3-aminopropanol and ethanolamine), 3-aminopropanol showed the best performance in enhancing wheat straw dissolution and cellulose recovery in 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac). Further study revealed that this additive could also inhibit cellulose degradation in [EMIM]Ac. The interactions between the ionic liquid and additive were revealed by NMR and IR analysis. It was found that the formation of hydrogen bonds between 3-aminopropanol and [EMIM]Ac changed the interactions between ionic liquids and biomass, resulting in improved dissolution efficiency and inhibition of cellulose degradation. Optimization investigation showed that when using the 3-aminopropanol/[EMIM]Ac composite system as the solvent and pine as the raw biomass, the cellulose content in the recovered cellulose-rich material was increased from 33.3% (for the raw pine) to 66.9%. Correspondingly, the regenerated cellulose spinning in the composite system exhibited improved mechanical properties, with the elongation at break reaching 15.6% and the tensile fracture strength of 184.1 N per tex (in comparison with 9.6% for elongation at break and 99.7 N per tex for tensile fracture strength for the sample obtained in neat [EMIM]Ac).

Challenging DESs and ILs in the valorization of food waste: a case study

In this study, the efficacy of two of the best performing green solvents for the fractionation of lignocellulosic biomass, cholinium arginate (ChArg) as biobased ionic liquid (Bio-IL) and ChCl:lactic acid (ChCl:LA, 1:10) as natural deep eutectic solvent (NADES), was investigated and compared in the pretreatment of an agri-food industry waste, apple fibers (90°C for 1 h). For the sake of comparison, 1-butyl-3-methylimidazolium acetate (BMIM OAc) as one of the best IL able to dissolve cellulose was also used. After the pretreatment, two fractions were obtained in each case. The results gathered through FTIR and TG analyses of the two materials and the subsequent DNS assay performed after enzymatic treatment led to identify ChArg as the best medium to delignify and remove waxes, present on the starting apple fibers, thus producing a material substantially enriched in cellulose (CRM). Conversely, ChCl:LA did not provide satisfactorily results using these mild conditions, while BMIM OAc showed intermediate performance probably on account of the reduced crystallinity of cellulose after the dissolution-regeneration process. To corroborate the obtained data, FTIR and TG analyses were also performed on the residues collected after the enzymatic hydrolysis. At the end of the pretreatment, ChArg was also quantitatively recovered without significant alterations.

Functional surfaces, films, and coatings with lignin - a critical review

Lignin is the most abundant polyaromatic biopolymer. Due to its rich and versatile chemistry, many applications have been proposed, which include the formulation of functional coatings and films. In addition to replacing fossil-based polymers, the lignin biopolymer can be part of new material solutions. Functionalities may be added, such as UV-blocking, oxygen scavenging, antimicrobial, and barrier properties, which draw on lignin's intrinsic and unique features. As a result, various applications have been proposed, including polymer coatings, adsorbents, paper-sizing additives, wood veneers, food packaging, biomaterials, fertilizers, corrosion inhibitors, and antifouling membranes. Today, technical lignin is produced in large volumes in the pulp and paper industry, whereas even more diverse products are prospected to be available from future biorefineries. Developing new applications for lignin is hence paramount - both from a technological and economic point of view. This review article is therefore summarizing and discussing the current research-state of functional surfaces, films, and coatings with lignin, where emphasis is put on the formulation and application of such solutions.

Inhibitor formation and detoxification during lignocellulose biorefinery: A review

For lignocellulose biorefinery, pretreatment is needed to maximize the cellulose accessibility, frequently generating excess inhibitory substances to decline the efficiency of the subsequent fermentation processes. This mini-review updates the current research efforts to detoxify the adverse impacts of generated inhibitors on the performance of biomass biorefinery. The lignocellulose pretreatment processes are first reviewed. The generation of inhibitors, furans, furfural, phenols, formic acid, and acetic acid, from the lignocellulose, with their action mechanisms, are listed. Then the detoxification processes are reviewed, from which the biological detoxification processes are noted as promising and worth further study. The challenges and prospects for applying biological detoxification in lignocellulose biorefinery are outlined. Integrated studies considering the entire biorefinery should be performed on a case-by-case basis.

Extraction and isolation of lignin from ash tree (Fraxinus exselsior) with protic ionic liquids (PILs)

Protic ionic liquids (PILs) have been considered effective solvents for the selective separation and recovery of cellulose from lignocellulosic biomass. However, PILs can also be utilized for the extraction and conversion of lignin into fuels and value-added products. The objective of this work was to study the extraction of lignin from ash tree (Fraxinus exselsior) hardwood biomass using three different PILs-pyridinium acetate, pyridinium formate [Py][For], and pyrrolidinium acetate. Fiber analysis was used to determine the biochemical composition of the left-over biomass after lignin separation. FTIR and NMR were applied to determine the structure of dissolved lignin. Additionally, the regeneration potential and recyclability of PILs were assessed. Our results demonstrate that treatment with [Py][For] at 75 °C yields the highest percentage of lignin dissolution from biomass. This indicates that PILs could be used for Kraft lignin dissolution as well as separation of lignin from raw, milled biomass.

Recent Advances in Synthesis and Degradation of Lignin and Lignin Nanoparticles and Their Emerging Applications in Nanotechnology

Lignin is an important commercially produced polymeric material. It is used extensively in both industrial and agricultural activities. Recently, it has drawn much attention from the scientific community. It is abundantly present in nature and has significant application in the production of biodegradable materials. Its wide usage includes drug delivery, polymers and several forms of emerging lignin nanoparticles. The synthesis of lignin nanoparticles is carried out in a controlled manner. The traditional manufacturing techniques are costly and often toxic and hazardous to the environment. This review article highlights simple, safe, climate-friendly and ecological approaches to the synthesis of lignin nanoparticles. The changeable, complex structure and recalcitrant nature of lignin makes it challenging to degrade. Researchers have discovered a small number of microorganisms that have developed enzymatic and non-enzymatic metabolic pathways to use lignin as a carbon source. These microbes show promising potential for the biodegradation of lignin. The degradation pathways of these microbes are also described, which makes the study of biological synthesis much easier. However, surface modification of lignin nanoparticles is something that is yet to be explored. This review elucidates the recent advances in the biodegradation of lignin in the ecological system. It includes the current approaches, methods for modification, new applications and research for the synthesis of lignin and lignin nanoparticles. Additionally, the intricacy of lignin’s structure, along with its chemical nature, is well-described. This article will help increase the understanding of the utilization of lignin as an economical and alternative-resource material. It will also aid in the minimization of solid waste arising from lignin.

Utilization of lignin upon successive fractionation and esterification in polylactic acid (PLA)/lignin biocomposite

The study presents the preparation of novel biocomposites based on different lignin fractions and polylactic acid (PLA). The lignin was extracted from pine residue using deep eutectic solvent (DES) and was subjected to fractionation with ethanol and acetone as well as esterification modification with succinic anhydride (SAn). Different lignin fractions were characterized and analyzed, while lignin-based biocomposites were prepared by melt injection. The results showed that lignin molecular weight was inversely proportional to the phenolic hydroxyl content and positively proportional to the alcohol hydroxyl group. The mechanical properties of the composites were also significantly affected by different molecular weights of lignin, indicating that the non-homogeneity of lignin affects its value-added utilization. In contrast to other performances of composites, the flexural and impact strengths of the materials prepared by acetone extracted lignin (AL) were improved by 18.2% and 28%, respectively, while the antibacterial properties against Staphylococcus aureus were up to 95%. The enhanced mechanical properties, antibacterial effect, and steady biocompatibility provide potential possibilities for lignin-based composites in biomedical applications.

The Dual Effect of Ionic Liquid Pretreatment on the Eucalyptus Kraft Pulp during Oxygen Delignification Process

Oxygen delignification presents high efficiency but causes damage to cellulose, therefore leading to an undesired loss in pulp strength. The effect of ionic liquid pretreatment of [BMIM][HSO₄] and [TEA][HSO₄] on oxygen delignification of the eucalyptus kraft pulp was investigated at 10% IL loading and 10% pulp consistency, after which composition analysis, pulp and fiber characterizations, and the mechanism of lignin degradation were carried out. A possible dual effect of enhancing delignification and protecting fibers from oxidation damage occurred simultaneously. The proposed [TEA][HSO₄] pretreatment facilitated lignin removal in oxygen delignification and provided fibers with improved DP, fiber length and width, and curl index, resulting in the enhanced physical strength of pulp. Particularly, its folding endurance improved by 110%. An unusual brightness reduction was identified, followed by detailed characterization on the pulps and extracted lignin with FTIR, UV, XPS, and HSQC. It was proposed that [TEA][HSO₄] catalyzed the cleavage of β-O-4 bonds in lignin during the oxygen delignification, with the formation of Hibbert’s ketones and quinonoid compounds. The decomposed lignin dissolved and migrated to the fiber surface, where they facilitated the access of the oxidation agent and protected the fiber framework from oxidation damage. Therefore, it was concluded that ionic liquid pretreatment has a dual effect on oxygen delignification.