Key Stages of Fiber Development as Determinants of Bast Fiber Yield and Quality

Nano cells from fruit bunch residue: Nestling nanotechnology within the circular oil palm milling residue management

Nano-structured materials gain a vast market acceptance mainly due to their overarching endurance. Nanofibrillar cellulose (NFC) is one example of an augmenting agent unviable for production by small and medium enterprises (SMEs) due to the underlying process complexity. This study aims to characterise the NFC-alternative cells denoted as TRX-cellsⓇ, which is a mix of cellulose and non-cellulose components, ruling out its status as 'cellulose nanofibers, CNF'. The aim to test-fit the TRX-cells® production process into the circularity model was executed by deliberating on the usability of the byproduct. In doing so, fibrous oil palm empty fruit bunch (EFB) was treated with dioxydanyl radicals (DIOR) and homogenised. The rapid EFB-DIOR reaction at 70°C targeting dearomatisation reaction in a 10%-solid open system was performed before refining the DIOR-treated EFB to micro-scale fibres. Subjecting the micro-fibres to 17 kWh/mt PFI-milling yielded 85-95% of nano-scale fibrous mass. Relative to the stiff micro-fibres, the nano-scale cells web exhibit 34-41% softness enhancement judged from the web tear resistance profile associated with inter-fibre space reduction. Advanced chromatographic evidence for 27% xylan amongst TRX-cells®' total aldo-sugars was one form of the non-cellulose nano-component. High-resolution Transmission Electron Microscopy hyphenated to Energy Dispersive Analysis of X-ray (HRTEM-EDX) elemental mapping showed a 0.4 atomic percentage of nano-biominerals, confirming the presence of the redistributed dearomatised cells adjacent to cellulose held in the web of the hemicellulose. Shearing at the dearomatised inter-cell wall layers by PFI mill peeled 5 nm-100 nm thickness laminae. The smorgasbord of cellulose and non-celluloses resulted in crystallinity comparable to softwood NFC of approximately 60%, with unique preservation and precision-printing enabling properties. Given the non-recyclability of the DIOR-treated EFB microfibres, nestling the rapid waste transformation process into the circularity model shed light on circular bio-nanotechnology to the spectrum of opportunity for zero-waste, reduced emission and net zero carbon practices on top of an added value from waste transformation to a product.

Era of bast fibers-based polymer composites for replacement of man-made fibers

Bast fibers are defined as those obtained from the outer cell layers of the bast of various plant families. They are finding use in textile applications and are widely used as reinforcements for green composites, as bast fibers are perceived as "sustainable". There is a growing demand for bast fibers across the world due to their renewable and biodegradable nature. The bast fibers are mainly composed of cellulose, which potentially considers the growing techniques, harvesting and extraction processes of bast fibers most used to produce fibers with appropriate quality to apply in the daily lives of modern men and women in contemporary society. This review paper looks at many aspects of natural fibers, with a focus on plant bast fibers, including their impact on prehistoric and historical society. This review shows that bast fibers are competitive compared to man-made fibers in many applications, but variability in mechanical properties and low tenacity may limit their use in high-strengthh composites and extend to, particularly in aerospace, automotive, packaging, building industries, insulation, E-composites (Eco composites), geotextiles and many other applications are currently being explored. Considering, important characteristics of bast fibers include physical, mechanical, and chemical properties. This makes bast fibers one of the most important classes of plant fibers to use as reinforcing agents in thermosetting/thermoplastic polymer matrices. And the effect of bast fibers as reinforcement in the properties of ECO-composites, GREEN-composites, BIO-composites, lightweight composites. Bast fibers play an important role in sustainability, the preservation of the health of the environment, the well-being of the next generation, and even the daily lives of men and women in the contemporary world.

Identification of new potential molecular actors related to fiber quality in flax through Omics

One of the biggest challenges for a more widespread utilization of plant fibers is to better understand the different molecular factors underlying the variability in fineness and mechanical properties of both elementary and scutched fibers. Accordingly, we analyzed genome-wide transcription profiling from bast fiber bearing tissues of seven different flax varieties (4 spring, 2 winter fiber varieties and 1 winter linseed) and identified 1041 differentially expressed genes between varieties, of which 97 were related to cell wall metabolism. KEGG analysis highlighted a number of different enriched pathways. Subsequent statistical analysis using Partial Least-Squares Discriminant Analysis showed that 73% of the total variance was explained by the first 3 X-variates corresponding to 56 differentially expressed genes. Calculation of Pearson correlations identified 5 genes showing a strong correlation between expression and morphometric data. Two-dimensional gel proteomic analysis on the two varieties showing the most discriminant and significant differences in morphometrics revealed 1490 protein spots of which 108 showed significant differential abundance. Mass spectrometry analysis successfully identified 46 proteins representing 32 non-redundant proteins. Statistical clusterization based on the expression level of genes corresponding to the 32 proteins showed clear discrimination into three separate clusters, reflecting the variety type (spring-/winter-fiber/oil). Four of the 32 proteins were also highly correlated with morphometric features. Examination of predicted functions for the 9 (5 + 4) identified genes highlighted lipid metabolism and senescence process. Calculation of Pearson correlation coefficients between expression data and retted fiber mechanical measurements (strength and maximum force) identified 3 significantly correlated genes. The genes were predicted to be connected to cell wall dynamics, either directly (Expansin-like protein), or indirectly (NAD(P)-binding Rossmann-fold superfamily protein). Taken together, our results have allowed the identification of molecular actors potentially associated with the determination of both in-planta fiber morphometrics, as well as ex-planta fiber mechanical properties, both of which are key parameters for elementary fiber and scutched fiber quality in flax.

Plant Fibers as Composite Reinforcements for Biomedical Applications

Plant fibers possess high strength, high fracture toughness and elasticity, and have proven useful because of their diversity, versatility, renewability, and sustainability. For biomedical applications, these natural fibers have been used as reinforcement for biocomposites to infer these hybrid biomaterials mechanical characteristics, such as stiffness, strength, and durability. The reinforced hybrid composites have been tested in structural and semi-structural biodevices for potential applications in orthopedics, prosthesis, tissue engineering, and wound dressings. This review introduces plant fibers, their properties and factors impacting them, in addition to their applications. Then, it discusses different methodologies used to prepare hybrid composites based on these widespread, renewable fibers and the unique properties that the obtained biomaterials possess. It also examines several examples of hybrid composites and their biomedical applications. Finally, the findings are summed up and some thoughts for future developments are provided. Overall, the focus of the present review lies in analyzing the design, requirements, and performance, and future developments of hybrid composites based on plant fibers.

Combined use of specific length amplified fragment sequencing (SLAF-seq) and bulked segregant analysis (BSA) for rapid identification of genes influencing fiber content of hemp (Cannabis sativa L.)

Hemp (Cannabis sativa L.), an ancient crop, is a significant source of high-quality fiber that primarily caters to the textile industry worldwide. Fiber content is a crucial quantitative trait for evaluating fiber yield in hemp. Understanding the genetic mechanisms involved in hemp breeding is essential for improving yield. In this study, we developed 660 F1 plants from a cross between Jindao-15 (high fiber content fiber-use variety) and Fire No.1 (low fiber content fiber-use variety), and thirty plants each with high and low fiber content were selected from 305 monoecious plants of this population according to 5%-10% of population size for quantitative traits. The DNA from these plants was extracted to establish two bulk DNA pools and then subjected to the restriction digestion by the enzymes RsaI and HaeIII to obtain 314-364 bp digestion fragments and subjected to sequencing using specific length amplified fragment sequencing (SLAF-seq). Finally, we successfully developed 368,404 SLAF tags, which led to the detection of 25,133 high-quality SNPs. Combing with the resequencing results of parents, the SNPs of mixed pools were then subjected to the SNP-Index correlation algorithm, which revealed four candidate regions related to fiber content traits on Chromosome 1, with a length of 8.68 Mb and containing 389 annotated genes. The annotation information and the comparison results identified 15 genes that were highly likely to modulate the fiber content of hemp. Further, qPCR validation identified six genes (LOC115705530, LOC115705875, LOC115704794, LOC115705371, LOC115705688 and LOC115707511) that were highly positively correlated with influencing the hemp fiber content. These genes were involved in the transcription regulation, auxin and water transportion, one carbon and sugar metabolism. And non-synnoumous mutation SNPs which may play vital role in influencing the fiber content were detected in LOC115705875, LOC115704794, LOC115705688 and LOC115707511. Thus, our study highlights the importance of the combined use of SLAF-Seq and Bulked Segregant analysis (BSA) to locate genes related to hemp fiber content rapidly. Hence, our study provides novel mechanistic inputs for the fast identification of genes related to important agronomic traits of hemp and other crops catering to the textile industry.

Critical Factors for Optimum Biodegradation of Bast Fiber’s Gums in Bacterial Retting

Bast fiber plants require a post-harvest process to yield useable natural cellulosic fibers, denoted as retting or degumming. It encompasses the degradation of the cell wall’s non-cellulosic gummy substances (NCGs), facilitating fibers separations, setting the fiber’s quality, and determining downstream usages. Due to the inconvenience of traditional retting practices, bacterial inoculum and enzyme applications for retting gained attention. Therefore, concurrent changes of agroclimatic and socioeconomic conditions, the conventional water retting confront multiple difficulties, bast industries become vulnerable, and bacterial agents mediated augmented bio-retting processes trying to adapt to sustainability. However, this process’s success demands a delicate balance among substrates and retting-related biotic and abiotic factors. These critical factors were coupled to degrade bast fibers NCGs in bacterial retting while holistically disregarded in basic research. In this study, a set of factors were defined that critically regulates the process and requires to be comprehended to achieve optimum retting without failure. This review presents the bacterial strain characteristics, enzyme potentials, specific bast plant cell wall’s structure, compositions, solvents, and interactions relating to the maximum NCGs removal. Among plants, associated factors pectin is the primary biding material that determines the process’s dynamics, while its degree of esterification has a proficient effect through bacterial enzymatic degradation. The accomplished bast plant cell wall’s structure, macerating solvents pH, and temperature greatly influence the bacterial retting process. This article also highlights the remediation process of water retting pollution in a biocompatible manner concerning the bast fiber industry’s endurance.

Cell Wall Layer Induced in Xylem Fibers of Flax Upon Gravistimulation Is Similar to Constitutively Formed Cell Walls of Bast Fibers

In the fibers of many plant species after the formation of secondary cell walls, cellulose-enriched cell wall layers (often named G-layers or tertiary cell walls) are deposited which are important in many physiological situations. Flax (Linum usitatissimum L.) phloem fibers constitutively develop tertiary cell walls during normal plant growth. During the gravitropic response after plant inclination, the deposition of a cellulose-enriched cell wall layer is induced in xylem fibers on one side of the stem, providing a system similar to that of tension wood in angiosperm trees. Atomic force microscopy (AFM), immunochemistry, and transcriptomic analyses demonstrated that the G-layer induced in flax xylem fibers was similar to the constitutively formed tertiary cell wall of bast (phloem) fibers but different from the secondary cell wall. The tertiary cell walls, independent of tissue of origin and inducibility, were twice as stiff as the secondary cell walls. In the gravitropic response, the tertiary cell wall deposition rate in xylem was higher than that of the secondary cell wall. Rhamnogalacturonan I (RG-I) with galactan side chains was a prominent component in cellulose-rich layers of both phloem and xylem flax fibers. Transcriptomic events underlying G-layer deposition in phloem and xylem fibers had much in common. At the induction of tertiary cell wall deposition, several genes for rhamnosyltransferases of the GT106 family were activated in xylem samples. The same genes were expressed in the isolated phloem fibers depositing the tertiary cell wall. The comparison of transcriptomes in fibers with both inducible and constitutive tertiary cell wall deposition and xylem tissues that formed the secondary cell walls is an effective system that revealed important molecular players involved in the formation of cellulose-enriched cell walls.

The Toolbox for Fiber Flax Breeding: A Pipeline From Gene Expression to Fiber Quality

The goal of any plant breeding program is to improve quality of a target crop. Crop quality is a comprehensive feature largely determined by biological background. To improve the quality parameters of crops grown for the production of fiber, a functional approach was used to search for genes suitable for the effective manipulation of technical fiber quality. A key step was to identify genes with tissue and stage-specific pattern of expression in the developing fibers. In the current study, we investigated the relationship between gene expression evaluated in bast fibers of developing flax plants and the quality parameters of technical fibers measured after plant harvesting. Based on previously published transcriptomic data, two sets of genes that are upregulated in fibers during intrusive growth and tertiary cell wall deposition were selected. The expression level of the selected genes and fiber quality parameters were measured in fiber flax, linseed (oil flax) cultivars, and wild species that differ in type of yield and fiber quality parameters. Based on gene expression data, linear regression models for technical stem length, fiber tensile strength, and fiber flexibility were constructed, resulting in the identification of genes that have high potential for manipulating fiber quality. Chromosomal localization and single nucleotide polymorphism distribution in the selected genes were characterized for the efficacy of their use in conventional breeding and genome editing programs. Transcriptome-based selection is a highly targeted functional approach that could be used during the development of new cultivars of various crops.

Genome-wide identification of fasciclin-like arabinogalactan proteins in jute and their expression pattern during fiber formation

Fasciclin-like arabinogalactan proteins (FLAs), a class of arabinogalactan proteins (AGPs) are involved in plant growth and development via cell communication and adhesion. FLAs were also associated with fiber and wood formation in plants but no information is available about the roles of FLA proteins during fibre development of jute. Here, we performed molecular characterization, evolutionary relationship and expression profiling of FLAs proteins in jute (Corchorus olitorius). In total, nineteen CoFLA genes have been identified in jute genome, which were divided into four classes like FLAs of other species based on protein structure and similarity. All CoFLAs have N-terminal signal peptide and one or two FAS domain while two FLAs lack well defined AGP region and eight FLAs were devoid of C-terminal glycosylphosphatidylinositol (GPI) anchor. Expression analysis of different regions of jute stem suggested their involvement in different fiber development stages. Four genes CoFLA 11, 12, 20, and 23 were highly or predominately expressed in fiber containing bark tissues while the expression levels of six CoFLA genes 02, 03, 04, 06, 14 and 19 were comparatively higher in stick. Higher transcripts levels of CoFLA 12 and 20 in the middle bark tissues suggest their involvement in fiber elongation. In contrast, the CoFLA 11 and 23 were more expressed in bottom bark tissues suggesting their potential involvement in secondary cell wall synthesis. Our study can serve as solid foundation for further functional exploration of FLAs and in future breeding program of jute aiming fiber improvement.

Flax rhamnogalacturonan lyases: phylogeny, differential expression and modeling of protein structure

Rhamnogalacturonan lyases (RGLs; EC 4.2.2.23) degrade the rhamnogalacturonan I (RG-I) backbone of pectins present in the plant cell wall. These enzymes belong to polysaccharide lyase family 4, members of which are mainly from plants and plant pathogens. RGLs are investigated, as a rule, as pathogen 'weapons' for plant cell wall degradation and subsequent infection. Despite the presence of genes annotated as RGLs in plant genomes and the presence of substrates for enzyme activity in plant cells, evidence supporting the involvement of this enzyme in certain processes is limited. The differential expression of some RGL genes in flax (Linum usitatissimum L.) tissues, revealed in our previous work, prompted us to carry out a total revision (phylogenetic analysis, analysis of expression and protein structure modeling) of all the sequences of flax predicted as coding for RGLs. Comparison of the expressions of LusRGL in various tissues of flax stem revealed that LusRGLs belong to distinct phylogenetic clades, which correspond to two co-expression groups. One of these groups comprised LusRGL6-A and LusRGL6-B genes and was specifically upregulated in flax fibers during deposition of the tertiary cell wall, which has complex RG-I as a key noncellulosic component. The results of homology modeling and docking demonstrated that the topology of the LusRGL6-A catalytic site allowed binding to the RG-I ligand. These findings lead us to suggest the presence of RGL activity in planta and the involvement of special isoforms of RGLs in the modification of RG-I of the tertiary cell wall in plant fibers.

Intrusive Growth of Phloem Fibers in Flax Stem: Integrated Analysis of miRNA and mRNA Expression Profiles

Phloem fibers are important elements of plant architecture and the target product of many fiber crops. A key stage in fiber development is intrusive elongation, the mechanisms of which are largely unknown. Integrated analysis of miRNA and mRNA expression profiles in intrusivelygrowing fibers obtained by laser microdissection from flax (Linum usitatissimum L.) stem revealed all 124 known flax miRNA from 23 gene families and the potential targets of differentially expressed miRNAs. A comparison of the expression between phloem fibers at different developmental stages, and parenchyma and xylem tissues demonstrated that members of miR159, miR166, miR167, miR319, miR396 families were down-regulated in intrusively growing fibers. Some putative target genes of these miRNA families, such as those putatively encoding growth-regulating factors, an argonaute family protein, and a homeobox-leucine zipper family protein were up-regulated in elongating fibers. miR160, miR169, miR390, and miR394 showed increased expression. Changes in the expression levels of miRNAs and their target genes did not match expectations for the majority of predicted target genes. Taken together, poorly understood intrusive fiber elongation, the key process of phloem fiber development, was characterized from a miRNA-target point of view, giving new insights into its regulation.