Influence of Codium tomentosum Extract in the Properties of Alginate and Chitosan Edible Films

Effect of rosin based quaternary ammonium salt on mechanical, hydrophily, antibacterial of cornstarch/polydopamine film for food packaging

Food packaging made of biobased materials is environmentally friendly, among which starch film is a type of biobased packaging with great development value. Some existing studies have attempted to add polydopamine (PDA) to enhance cross-linking, but there are still problems such as weakness and hydrophilicity, which greatly limit its application. Therefore, this study synthesized rosin based quaternary ammonium salt-modified cornstarch (ST-B), which was used to replace part of unmodified cornstarch (ST). In the prepared ST/PDA0.5/ST-B5 film, the introduction of a rigid rosin structure increased the stress and water contact angle of the ST/PDA0.5 film by 62 % and 26 %, respectively, while reducing its wettability and WVP; thus, further enhancing its antioxidant activity. Due to the antibacterial ability of rosin quaternary ammonium cations, the packaging film containing 7 wt% ST-B can kill >94.6 % of S. aureus and 99.9 % of E. coli, and can also extend the shelf life of strawberries. In addition, it is proven that the packaging film has good biocompatibility and high safety within cytotoxicity tests and 30-day gavage tests in mice. Therefore, the prepared ST/PDA/ST-B film has more potential for application in food preservation.

Physicochemical Characterization and Antioxidant Properties of Chitosan and Sodium Alginate Based Films Incorporated with Ficus Extract

Aqueous extract of fruit obtained from Ficus racemosa enriched with phenolic components was used for the first time to fabricate chitosan (CS) and sodium alginate (SA)-based edible films. The edible films supplemented with Ficus fruit aqueous extract (FFE) were characterized physiochemically (using Fourier transform infrared spectroscopy (FT-IR), Texture analyser (TA), Thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and colourimeter) and biologically (using antioxidant assays). CS-SA-FFA films showed high thermal stability and high antioxidant properties. The addition of FFA into CS-SA film decreased transparency, crystallinity, tensile strength (TS), and water vapour permeability (WVP) but ameliorate moisture content (MC), elongation at break (EAB) and film thickness. The overall increase in thermal stability and antioxidant property of CS-SA-FFA films demonstrated that FFA could be alternatively used as a potent natural plant-based extract for the development of food packaging material with improved physicochemical and antioxidant properties.

Chitosan Based Materials in Cosmetic Applications: A Review

This review provides a report on the properties and recent advances in the application of chitosan and chitosan-based materials in cosmetics. Chitosan is a polysaccharide that can be obtained from chitin via the deacetylation process. Chitin most commonly is extracted from cell walls in fungi and the exoskeletons of arthropods, such as crustaceans and insects. Chitosan has attracted significant academic interest, as well as the attention of the cosmetic industry, due to its interesting properties, which include being a natural humectant and moisturizer for the skin and a rheology modifier. This review paper covers the structure of chitosan, the sources of chitosan used in the cosmetic industry, and the role played by this polysaccharide in cosmetics. Future aspects regarding applications of chitosan-based materials in cosmetics are also mentioned.

Introduction of Curdlan Optimizes the Comprehensive Properties of Methyl Cellulose Films

The good oxygen barrier and hydrophobic properties of curdlan (CL) film might be suitable complements for MC film, and its similar glucose unit and thermal-gel character might endow the methyl cellulose (MC)/CL blended system with compatibility and good comprehensive properties. Thus, MC/CL blended films were developed. The effects of MC/CL blend ratios on the microstructures and physical properties of the blends were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), oxygen and water vapor permeability testing, dynamic mechanical analysis (DMA), light transmittance testing, tensile testing, hydrophilic property testing, and water solubility testing. The introduction of CL affected the molecular aggregation and crystallization of the MC molecules, suggesting MC-CL molecular interactions. The cross-sectional roughness of the MC/CL film increased with an increase in CL content, while the surface of the MC/CL 5:5 film was smoother than those of the MC/CL 7:3 and 3:7 films. Only one glass transition temperature, which was between that of the MC and CL films, was observed for the MC/CL 7:3 and MC/CL 5:5 films, indicating the good compatibility of the MC and CL molecules at these two blend ratios. The hydrophobicity and water insolubility increased with the CL content, which was due to the combined effects of more hydrophobic cavities in the CL triple-helix and increased surface roughness. Increased oxygen barrier properties with increasing CL content might be a combined effect of the increased hydrogen bonds and hydrophilic ektexines of the CL triple-helix. The elongations of the blended films were higher than those of the MC film, which might be related to its increased water content. The MC/CL 7:3 and MC/CL 5:5 films retained the good light transmittance and tensile strength of the MC film, which corresponded well to their good compatibility and might be due to the effects of the MC-CL molecular interactions and the relative smooth morphologies. MC/CL 5:5 showed improved water vapor barrier properties, which might be due to its smooth surface morphologies. This research offers new MC based films with improved properties and good compatibility, providing great potential for use as edible coatings, capsules, and packaging materials.

Gold Nanoparticles Synthesized by an Aqueous Extract of Codium tomentosum as Potential Antitumoral Enhancers of Gemcitabine

Cancer still poses a global threat, since a lot of tumors remain untreatable despite all the available chemotherapeutic drugs, whose side effects, it must also be noted, still raise concerns. The antitumoral properties of marine seaweeds make them a potential source of new, less toxic, and more active antitumoral agents. Furthermore, these natural extracts can be combined with nanotechnology to increase their efficacy and improve targeting. In this work, a Codium tomentosum (CT) aqueous extract was employed for the green synthesis of gold nanoparticles (Au@CT). The complete characterization of Au@CT was performed by UV-Vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, Zeta potential, electron microscopy, X-ray powder diffraction (XRD), high-performance steric exclusion chromatography (HPSEC), and by the determination of their antioxidant capacity. The antiproliferative activity of Au@CT was then tested in hepatic (HEPG-2) and pancreatic (BxPC-3) cell lines. Their potential capacity as enhancers of gemcitabine, a drug frequently used to treat both types of tumors, was also tested. The activity of Au@CT was compared to the activity of the CT extract alone. A synergistic effect with gemcitabine was proven for HEPG-2. Our results showed that gold nanoparticles synthesized from seaweed extracts with antitumoral activity could be a good gemcitabine enhancer.

Mechanical, Barrier, Antioxidant and Antimicrobial Properties of Alginate Films: Effect of Seaweed Powder and Plasma-Activated Water

The incorporation of natural fillers such as seaweed may potentially enhance the properties of biopolymer films. In this study, we investigated the effect of seaweed powder as a bio-filler in alginate-based films at different concentrations (10, 30, and 50%, w/w alginate) and particle sizes (100 and 200 μm) on the mechanical, barrier, antioxidant, and antimicrobial properties of alginate which are essential for food packaging applications. Initially, mechanical properties of the alginate films prepared at different temperatures were evaluated to find the optimal temperature for preparing alginate solution. The addition of seaweed powder did not have any positive effect on the mechanical properties of the alginate films. However, the barrier (water vapor transmission rate) and antioxidant properties were improved with the addition of seaweed filler regardless of concentration. In addition, selected films were prepared in plasma-activated water (PAW). The mechanical properties (tensile strength, but not elongation at break) of the films prepared with PAW improved compared to the films prepared in distilled water, while a significant decrease was observed when incorporated with the seaweed filler. The films prepared in PAW also showed improved barrier properties compared to those prepared in distilled water. The antimicrobial activity of the alginate-seaweed film-forming solution was in general more pronounced when prepared with PAW and stored at 10 °C, particularly at the highest concentration of the film-forming solution (83.3% v/v). A more pronounced inhibitory effect was observed on the Gram-positive S. aureus than on the Gram-negative E. coli, which has been attributed to the different composition and structure of the respective cell walls. This study has demonstrated the potential of seaweed filler in combination with PAW towards enhanced functionality and bioactivity of alginate films for potential food packaging applications.

Active food packaging films from alginate and date palm pit extract: Physicochemical properties, antioxidant capacity, and stability

Date palm pits are highly available and inexpensive palm date by-products, representing a valuable source of natural antioxidants, particularly phenolic compounds. Date palm pit extract (DPPE) was prepared from these waste products and characterized for its phenolic content and in vitro antioxidant activity. Profiling DPPE by liquid chromatography coupled with mass spectrometry (LC/MS) showed the presence of dimers and trimers of (epi)catechin as the main constituents. Alginate-based films with four increasing concentrations of DPPE (10%, 20%, 30%, and 40% w/w) were prepared by the casting method. DPPE incorporation reduced solubility values of alginate films by 37%-64% and their surface wettability by 72%-111%. The incorporation of 10% DPPE improved water vapor barrier properties and increased tensile strength (TS) and elongation at break (%E) of alginate films by more than 23%, 50%, and 45%, respectively. The film containing 40% DPPE showed the lowest loss of phenolic content (32%), DPPH (1,1-diphenyl-2-picrylhydrazyl) scavenging activity (38%), and ferric reducing antioxidant power (FRAP) (30%) after storage for 3 months.

Characterisation and Antibacterial Properties of Novel Biodegradable Films Based on Alginate and Roselle (Hibiscus sabdariffa L.) Extract

Composite films were prepared with alginate and roselle extract (HE) at different concentrations (1%, 3%, and 5% w/v) via solvent casting technique and analyzed in terms of physical, mechanical, and antibacterial properties. The incorporation of HE into alginate films resulted in rough and heterogeneous surface characteristics with increasing concentrations of HE. The thickness and water vapor permeability of alginate-HE composite films were significantly higher (p < 0.05) compared to pure alginate films. Moreover, water content, solubility, swelling, tensile strength, and elongation at break value of the composite films decreased (p < 0.05) with increasing concentrations of the extract. FTIR spectra revealed shifts and intensity variations in the composite films and the formation of new peaks suggesting a possible interaction between alginate and HE. Alginate-HE films exhibited good antibacterial activity against Gram-positive (Staphylococcus aureus and Bacillus subtilis) and Gram-negative (Escherichia coli and Klebsiella pneumoniae) bacteria. The antibacterial effect of the films, more pronounced against Gram-positive bacteria, increased with higher amounts of HE. The resulting films may be utilised as new biodegradable, antibacterial films in the food packaging industry to prolong shelf life and preserve food safety.

Graphical Abstract

Supplementary Information

The online version of this article (10.1007/s12649-022-01710-3) contains supplementary material, which is available to authorized users.

Functional property optimization of sodium caseinate-based films incorporating functional compounds from date seed co-products using response surface methodology

Novel sodium caseinate films incorporating furfural and date seed oil (DSO) were produced. The effects of furfural and DSO contents on the functional and physical properties of the composite films were assessed using response surface methodology.

Preparation and Characterization of Chitosan-Nano-ZnO Composite Films for Preservation of Cherry Tomatoes

Chitosan is widely used as a natural preservative of fruits and vegetables, but its poor mechanical and water resistances have limited its application. Therefore, in this study, we prepared chitosan composite films by incorporating different amounts of nano-zinc oxide (nano-ZnO) to improve the mechanical properties of chitosan. We also assessed the antibacterial activity of these films against selected microorganisms. The addition of nano-ZnO improved the tensile strength (TS) and elongation at break (EAB) of the chitosan films and reduced their light transmittance. TS and EAB increased from 44.64 ± 1.49 MPa and 5.09 ± 0.38% for pure chitosan film to 46.79 ± 1.65 MPa and 12.26 ± 0.41% for a 0.6% nano-ZnO composite film, respectively. The ultraviolet light transmittance of composite films containing 0.2%, 0.4%, and 0.6% nano-ZnO at 600 nm decreased from 88.2% to 86.0%, 82.7%, and 81.8%, respectively. A disc diffusion test showed that the composite film containing 0.6% nano-ZnO had the strongest antibacterial activity against Alicyclobacillus acidoterrestris, Staphylococcus aureus, Escherichia coli, and Salmonella. In a 15-day preservation study, chitosan composite films containing 0.6% nano-ZnO maintained the soluble solid content of cherry tomatoes, effectively inhibited their respiration, and exhibited good antibacterial properties against the selected microorganisms. Overall, the prepared chitosan nano-ZnO composite film showed a good preservation effect on cherry tomatoes.

Seaweed Polysaccharide in Food Contact Materials (Active Packaging, Intelligent Packaging, Edible Films, and Coatings)

Food contact materials (FCMs) are materials that come in contact with food products such as food packaging which play a significant role in the food quality and safety. Plastic, which is a major food packaging material, harms the eco-system, wildlife, and the environment. As a result, numerous researches have been in progress on alternative polymers, which has similar properties as plastic but is also environmentally friendly (biodegradable). In recent years, the utilization of seaweed polysaccharides has piqued interest due to its biodegradability, non-toxicity, antioxidant capabilities, and excellent film formation ability. However, it has a number of drawbacks such as low tensile strength, water solubility, and moderate antibacterial characteristics, among others. The addition of other biopolymers, nanoparticles, or natural active agents improves these features. In this review article, we have summarized the current state of seaweed polysaccharide research in active packaging, intelligent packaging, edible films, and coatings. It also highlights the physical, thermal, antioxidant, and other properties of these materials. Finally, the article discusses the relevant legislation as well as the field’s future prospects. Research shows that seaweeds polysaccharide looks promising as a sustainable food contact material, but there is always a potential for development to make it market feasible.

Chitosan Edible Films Enhanced with Pomegranate Peel Extract: Study on Physical, Biological, Thermal, and Barrier Properties

In the present study, pomegranate peel extract was used as a reinforcing agent in developing chitosan-based edible film. Different concentrations (0.2 g/mL, 0.4 g/mL, 0.6 g/mL, 0.8 g/mL, and 1.0 g/mL) of pomegranate peel extract were incorporated in chitosan-based edible film. A neat chitosan film was used as a control. This work covers the effect of pomegranate peel extract on the physical, biological, mechanical, thermal, and barrier properties of enriched chitosan-based edible film. The results showed that the thickness (0.142-0.159 mm), tensile strength (32.45-35.23 MPa), moisture (11.23-15.28%), opacity (0.039-0.061%), water (1.32-1.60 g·mm/m2), gas barrier properties (93.81-103.45 meq/kg), phenolic content (5.75-32.41 mg/g), and antioxidant activity (23.13-76.54%) of the films increased with increasing volume fraction of pomegranate peel extract. A higher concentration of incorporated pomegranate peel extracts significantly (p < 0.05) reduced the thermal stability of the film, along with its transparency, solubility, swelling, and color. This work revealed that the incorporation of a higher portion of pomegranate peel extract in chitosan film holds significant (p < 0.05) potential for the increase in biological activities of such films in terms of antioxidant and antimicrobial behavior. The properties of pomegranate peel extract-enriched chitosan films could be an excellent cure for free radicals, whereas they could also inhibit the growth of the foodborne pathogens during the processing and preservation of the food. Further studies are needed for the application of pomegranate peel extract-enriched edible films on food products such as fruits and vegetables in order to extend their storage life and improve the quality and safety of preserved food products.

Antibacterial Use of Macroalgae Compounds against Foodborne Pathogens

The search for food resources is a constant in human history. Nowadays, the search for natural and safe food supplies is of foremost importance. Accordingly, there is a renewed interest in eco-friendly and natural products for substitution of synthetic additives. In addition, microbial contamination of food products during their obtaining and distribution processes is still a sanitary issue, and an important target for the food industry is to avoid food contamination and its related foodborne illnesses. These diseases are fundamentally caused by certain microorganisms listed in this review and classified according to their Gram negative or positive character. Algae have proven to possess high nutritional value and a wide variety of biological properties due to their content in active compounds. Among these capabilities, macroalgae are recognized for having antimicrobial properties. Thus, the present paper revises the actual knowledge of microbial contaminants in the food industry and proposes antimicrobial algal compounds against those pathogenic bacteria responsible for food contamination as valuable molecules for its growth inhibition. The capacity of algae extracts to inhibit some major food pathogen growth was assessed. Moreover, the main applications of these compounds in the food industry were discussed while considering their favorable effects in terms of food safety and quality control.

Domesticated Populations of Codium tomentosum Display Lipid Extracts with Lower Seasonal Shifts than Conspecifics from the Wild-Relevance for Biotechnological Applications of this Green Seaweed

In the last decades, the use of algae in biotechnology and food industries has experienced an exponential growth. Codium tomentosum is a green macroalgae with high biotechnological potential, due to its rich lipidome, although few studies have addressed it. This study aimed to investigate the seasonal changes in lipid and pigment profiles of C. tomentosum, as well as to screen its antioxidant activity, in order to evaluate its natural plasticity. Samples of C. tomentosum were collected in two different seasons, early-autumn (September/October) and spring (May), in the Portuguese coast (wild samples), and in a land-based integrated multitrophic aquaculture (IMTA) system (IMTA samples). Total lipid extracts were analysed by LC-MS, GC-MS, and HPLC, and antioxidant activity was screened through free radical scavenging potential against DPPH and 2,20-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radicals. Wild samples showed a high seasonal variability, modifying their lipidome and pigment profiles according to environmental shifts, while IMTA samples showed a relatively stable composition due to early-stage culturing in controlled conditions. The lipids that contributed the most to seasonal discrimination were glycolipids (monogalactosyl diacylglycerol - MGDG and digalactosyl diacylglycerol - DGDG) and the lyso forms of phospholipids and glycolipids. Lipid extracts showed antioxidant activity ranging from 61 ± 2 to 115 ± 35 µmol Trolox g^-1 of lipid extract in DPPH assay and from 532 ± 73 to 927 ± 92 µmol Trolox g^-1 of lipid extract in ABTS assay, with a more intense antioxidant activity in wild spring samples. This study revealed that wild specimens of C. tomentosum presented a higher plasticity to cope with seasonal environmental changes, adjusting their lipid, pigment, and bioactivity profiles, while IMTA samples, cultured under controlled conditions, displayed more stable lipidome and pigment compositions.

Effect of Sonication on the Properties of Flaxseed Gum Films Incorporated with Carvacrol

Carvacrol is a natural compound known to be a highly effective antibacterial; however, it is a hydrophobic molecule, which is a limitation to its use within food packaging. Flaxseed gum (FG) films containing different contents of carvacrol (C) were produced by a film-casting method with sonication. The effects of sonication power and time on the properties of the FG-C films were investigated by measuring the film thickness, mechanical properties, contact angle, opacity, water vapor permeability (WVP), water sorption isotherm, Fourier transform infrared spectroscopy(FTIR), differential scanning calorimetry (DSC), antibacterial and antioxidant activities, and microstructure. The results showed that sonication power and time had significant effects on mechanical and barrier properties, film opacity, and degradability (p < 0.05). The tensile strength (TS) and elongation at break (EB) values exhibited an obvious improvement after sonication, and FG-0.5C-6030 had the lowest TS (33.40 MPa) and EB (4.46%) values. FG-C films formed a denser structure and the contact angle was improved as a result of sonication, which improved the integration of carvacrol into the FG matrix. In terms of microstructure, sonication resulted in a homogeneous and continuous crosssection of FG-C films, and regular surface and cross-sectional images were obtained through the highest acoustic intensity and longest time treatment. The FG films incorporated with carvacrol displayed antibacterial properties against Staphylococcus aureus, Vibrio parahaemolyticus, Shewanella putrefaciens, and Pseudomonas fluorescens, as well as increased antioxidant properties, and sonication was proven to enhance both of them.

Characterization of Edible Films Based on Alginate or Whey Protein Incorporated with Bifidobacterium animalis subsp. lactis BB-12 and Prebiotics

Recently, edible films were shown to be an effective strategy for the delivery of functional ingredients, such as probiotics and prebiotics. With that in mind, two soluble fibres (inulin and fructooligosaccharides) were selected as prebiotic elements, in whey protein isolate (WPI) and alginate (ALG) matrices plasticized with glycerol and used for the incorporation of Bifidobacterium animalis subsp. lactis BB-12. The results obtained showed that the viability of the B. animalis subsp. lactis BB-12 probiotic strain was maintained within the minimum threshold (106 CFU/g) necessary to act as a probiotic throughout 60 days of storage at 23 °C. The incorporation of prebiotic compounds improved B. animalis subsp. lactis BB-12 viability, with inulin showing the best performance, as it maintained the viability at 7.34 log CFU/g. The compositional characteristics (biopolymer type and prebiotics addition) of the film forming solutions had no significant impact upon the viability of the probiotic strain. The incorporation of probiotics and prebiotics did not modify the infrared spectra, revealing that the molecular structure of the films was not modified. The moisture content and water solubility decreased positively in WPI- and ALG-based films with the addition of prebiotics compounds. Overall, the results obtained in this work support the use of WPI films containing inulin as a good strategy to immobilize B. animalis subsp. lactis BB-12, with potential applications in the development of functional foods.