Immediate Dentin Sealing for Adhesive Cementation of Indirect Restorations: A Systematic Review and Meta-Analysis

Is immediate dentin sealing a mandatory or optional clinical step for indirect restorations?

OBJECTIVE

The use of immediate dentin sealing (IDS) following tooth preparation for indirect restorations is well-supported by laboratory studies. The inclusion of IDS as a mandatory clinical step, it must be firmly supported by evidence from randomized clinical trials (RCT). The objective of this study is to assess whether IDS should be added as a mandatory procedure in all indirect restorations, taking into consideration clinically significant outcomes for the patient, such as restoration longevity and hypersensitivity.

MATERIALS AND METHODS

A bibliographic search was carried out in the PubMed. In addition, a manual search was conducted in the references of literature reviews.

RESULTS

Data from four RCT were included. Two studies assessed preparations for full crowns, and two assessed preparations for partial restorations. Data from full crown preparations were subjected to a meta-analysis, revealing a reduction in hypersensitivity incidence in the IDS group 1 week after restoration cementation. With respect to hypersensitivity, IDS seems to offer advantages exclusively during the provisional phase and up to 1 week following the cementation of the final restoration. One study has shown no difference on longevity.

CONCLUSION

The use of IDS should be considered as an elective clinical step during the rehabilitation with indirect restorations.

CLINICAL SIGNIFICANCE

IDS is an elective clinical step that should be considered in patients and preparations with a higher risk of sensitivity between appointments.

Clinical Survival Rate and Laboratory Failure of Dental Veneers: A Narrative Literature Review

There is a vast amount of published literature concerning dental veneers; however, the effects of tooth preparation, aging, veneer type, and resin cement type on the failure of dental veneers in laboratory versus clinical scenarios are not clear. The purpose of the present narrative review was to determine the principal factors associated with failures of dental veneers in laboratory tests and to understand how these factors translate into clinical successes/failures. Articles were identified and screened by the lead author in January 2024 using the keywords ''dental veneer", "complication", "survival rate", "failure", and "success rate" using PubMed/Medline, Scopus, Google Scholar, and Science Direct. The inclusion criteria included articles published between January 1999 and January 2024 on the topics of preparation of a tooth, aging processes of the resin cement and veneer, translucency, thickness, fabrication technique of the veneer; shade, and thickness of the resin cement. The exclusion criteria included articles that discussed marginal and internal fit, microhardness, water sorption, solubility, polishability, occlusal veneers, retention, surface treatments, and wear. The results of the present review indicated that dental veneers generally have a high survival rate (>90% for more than 10 years). The amount of preserved enamel layer plays a paramount role in the survival and success rates of veneers, and glass-ceramic veneers with minimal/no preparation showed the highest survival rates. Fracture was the primary failure mechanism associated with decreased survival rate, followed by debonding and color change. Fractures increased in the presence of parafunctional activities. Fewer endodontic complications were associated with veneer restorations. No difference was observed between the maxillary and mandibular teeth. Clinical significance: Fractures can be reduced by evaluation of occlusion immediately after cementation and through the use of high-strength veneer materials, resin cements with low moduli, and thin layers of highly polished veneers. Debonding failures can be reduced with minimal/no preparation, and immediate dentin sealing should be considered when dentin is exposed. Debonding can also be reduced by preventing contamination from blood, saliva, handpiece oil, or fluoride-containing polishing paste; through proper surface treatment (20 s of hydrofluoric acid etching for glass ceramic followed by silane for 60 s); and through use of light-cured polymerization for thin veneers. Long-term color stability may be maintained using resin cements with UDMA-based resin, glass ceramic materials, and light-cure polymerization with thin veneers.

The fracture strength and the failure mode of lithium disilicate or resin nano ceramics as a crown, overlay, or endocrown restoration on endodontically treated teeth

INTRODUCTION

Different materials and restorative concepts have been proposed over the years to restore endodontically treated teeth (ETT). Monolithic ceramic and composite restoration can be lute to the tooh, without the use of a post. However, little is known how the material stiffness and presence of a composite core will affect the survival and failure mode. The objective of this in-vitro study was to evaluate the fracture strength and failure mode of endodontically treated molars, restored with ceramic or hybrid composite monolithic restoration, in the presence of absence of a composite core.

MATERIALS AND METHODS

Sixty depulped molars were restored with a lithium-disilicate (e.max CAD) or hybrid composite (Cerasmart) restoration. Both materials were used in a monolithic approach, but with 3 different designs: (a) monolithic endocrown, (b) crown with a separate composite core, and (c) overlay without core buildup or pulpal extension. Ten sound teeth were used as control group. All groups were thermocycled (10,000 cycles), subsequently loaded in a chewing simulator (100,000 cycles) and finally loaded until fracture.

RESULTS

Peak fracture loads and failure modes were registered. No significant differences were seen between the groups in terms of fracture load. Failure modes were statistically significantly different among groups with significant correlation between restoration type and material. (p < 0.001 and p = 0.033, respectively). No group presented significantly higher fracture resistance. Although ceramic crowns and overlays presented the highest repairability, all restored ETT were within the range of the intact tooth' fracture strength.

CONCLUSION

No restoration presented significant different fracture loads. However, the type of restoration and material choice were correlated to the fracture mode.

Influence of Immediate Dentin Sealing on Bond Strength of Resin-Based CAD/CAM Restoratives to Dentin: A Systematic Review of In Vitro Studies

Immediate dentin sealing (IDS) is a method of improving the bond strength of indirect dental restorative materials to dentin and belongs to the biomimetic protocols of contemporary dentistry. The purpose of this systematic review was to evaluate the effect of IDS on the bond strength of resin-based CAD/CAM materials to dentin. PubMed and MEDLINE, Scopus, and the Web of Science were searched by two individual researchers, namely for studies that have been published in English between 1 January 2005 and 31 December 2023 in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The inclusion criteria encompassed articles related to in vitro studies, measuring the bond strength through microtensile bond strength (μ-TBS), micro-shear bond strength (μ-SBS), tensile bond strength (TBS) or shear bond strength (SBS) tests after the use of the IDS technique. The included restorative materials comprised resin-based CAD/CAM materials bonded to dentin. A total of 1821 studies were identified, of which 7 met the inclusion criteria. A meta-analysis was not deemed appropriate due to the high level of diversity inthe publications and techniques. The use of IDS yielded higher bond strength outcomesin various experimental conditions and resin-based CAD/CAM materials. Overall, IDS in CAD/CAM restorations may contribute to better clinical outcomesand improved restoration longevity due to this property.

Partial glass-ceramic posterior restorations with margins beyond or above the cemento-enamel junction: An observational retrospective clinical study

PURPOSE

This observational retrospective clinical study aimed to investigate the survival and success rates of partial indirect lithium disilicate restorations with margins extending above or beyond the cementoenamel junction (CEJ).

METHODS

The study included patients who underwent partial indirect lithium disilicate restorations with immediate dentin sealing (IDS) between January 2008 and October 2018. All the restorations were placed in a single general dental practice following a standardized protocol. The impact of various predictive variables on the survival rates was assessed. Moreover, modified United States Public Health Service (USPHS) criteria were used to evaluate the survival quality.

RESULTS

Totally 1146 partial indirect lithium disilicate restorations in 260 patients were evaluated over an average period of 7.5 years. The cumulative survival and success rates were 97.3% and 95.3%, respectively. Margins extending beyond the cemento-enamel junction did not increase the risk of success or survival failure (P > 0.05). Patients with a high risk of caries, male sex, or non-vital teeth had a significantly higher risk of restoration failure (P < 0.05). Restorations with longer clinical service times exhibited marginally lower clinical quality (P < 0.001).

CONCLUSIONS

Partial indirect glass-ceramic restorations demonstrated survival and success rates of 97.3% and 95.3%, respectively, over an extended period. However, a higher risk of restoration failure existed in patients with a high caries risk for (pre)molars that had undergone endodontic treatment and in males. In terms of the risk of success or survival failure, comparable results were obtained for the positions of the restoration margin in relation to the cemento-enamel junction.

Clinical benefits of immediate dentin sealing: A systematic review and meta-analysis

STATEMENT OF PROBLEM

The clinical complications, success, and survival rates of indirect restorations delivered with the immediate dentin sealing protocol are unclear.

PURPOSE

The purpose of this systematic review and meta-analysis was to find and collect evidence on the clinical complication, success, and survival rates of indirect restorations delivered with immediate dentin sealing.

MATERIAL AND METHODS

Electronic databases were searched for clinical studies on immediate dentin sealing up to December 2023, without language or time limitations. The records were included if they were clinical trials evaluating the clinical complication and survival rates of indirect restorations bonded to tooth substrate sealed immediately after preparation with suitable resin bonding. The extracted data were analyzed via Review Manager 5.4 for meta-analysis (α=.05).

RESULTS

A total of 11 studies were included in this review. The clinical complication rate was lower for immediately sealed dentin than for protocols without dentin sealing. The survival rate of restorations luted with the immediate dentin sealing protocol was higher (96.4% to 100%) than that of immediate dentin sealing (81.8% to 96.7%), negatively correlated with the observation time. The intensity and incidence of postoperative sensitivity were statistically significantly lower for restorations with immediate dentin sealing than for those without dentin sealing or conventionally cemented (P<.05).

CONCLUSIONS

Immediate dentin-sealed indirect restorations had fewer clinical complications and higher success and survival rates than those delivered without dentin sealing. To avoid postoperative sensitivity or reduce its intensity, dentin surfaces should be sealed immediately after preparation. More long-term randomized clinical trials are recommended to confirm these evidence-based conclusions.

Effect of Immediate Dentin Sealing on the Bonding Performance of Indirect Restorations: A Systematic Review

The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength is affected by the type of aging conditions, bonding agents, flowable resin composites, impression materials, temporary materials, and/or resin cement used within the IDS procedure. A comprehensive database search of PubMed, Embase, Scopus, Ovid Medline, Web of Sciences, Cochrane Library, Dentistry & Oral Sciences Source, and ProQuest was carried out up to 30 January 2024 without publication year or language limitations. Only in vitro full-texts regarding the effect of IDS on bond strength were included, and the quality of their methods was assessed via a Risk of Bias (RoB) test. In total, 1023 pertinent studies were initially found, and 60 articles were selected for review after screening for the title, abstract, and full texts. IDS application improves the bond strength of indirect restorations to dentin and reduces the negative effects of temporary materials on the bond durability of final indirect restorations. Filled dentin bonding agents or combinations with flowable resin composite are preferred to protect the IDS layer from conditioning procedures.

Clinical performance of bonded partial lithium disilicate restorations: The influence of preparation characteristics on survival and success

OBJECTIVES

The aim of this study was to investigate the influence of preparation characteristics on the survival, success, and clinical performance of partial indirect lithium disilicate restorations with immediate dentin sealing.

METHODS

This retrospective clinical study evaluated partial indirect lithium disilicate restorations placed in conjunction with Immediate Dentin Sealing (IDS) in (pre)molar teeth between March 2018 and May 2021. The restorations were luted using pre-heated composite. The study focused on survival, success, and clinical performance, which was evaluated using the modified United States Public Health Service (USPHS) criteria. Results were analyzed using the Kaplan-Meier estimates, log-rank tests, and Fisher exact tests.

RESULTS

Partial indirect lithium disilicate restorations (N = 454) were evaluated in 214 patients. The mean evaluation time was 37 months, with a cumulative survival rate of 99.2 % and a cumulative success rate of 97.6 %. Fourteen failures occurred, with endodontic pathology as the predominant failure mode, followed by secondary caries, debonding, and tooth fracture. No statistically significant influence of the preparation variables on survival and success was observed (p > .05). The short-term clinical performance was clinically acceptable in > 90 % of the evaluations.

CONCLUSIONS

This retrospective study on partial indirect lithium disilicate restorations in conjunction with IDS demonstrates survival and success rates of 99.2 and 96.7 % over a mean evaluation period of 37 months. A marked influence of the studied preparation characteristics on the survival, success and clinical performance of lithium disilicate partial restorations could not be demonstrated. Partial lithium disilicate restorations exhibit good clinical performance in >90 % of the cases.

CLINICAL SIGNIFICANCE

The results of this study suggest that preparation characteristics had no significant impact on the survival, success, and clinical performance of partial lithium disilicate restorations in conjunction with IDS. Results show good clinical performance and high survival and success rates, regardless of preparation characteristics.

A comprehensive review of resin luting agents: Bonding mechanisms and polymerisation reactions

The field of dentistry is constantly evolving and increasingly embracing minimally invasive approaches. One such approach, which is bonding to the tooth structure, particularly enamel, has been shown to offer the most predictable outcomes. However, there are instances where significant tooth loss may limit treatment options for a restorative dentist. In these scenarios, indirect restoration might be the preferred treatment option. This literature review provides a comprehensive examination of the currently available resin luting agents and their bonding requirements. It provides valuable insights for dental professionals seeking an in-depth understanding of the current state of the field and the future prospects of dental adhesion.

Is Deep margin elevation a reliable tool for cervical margin relocation? - A comparative review

The permanence of deep subgingival restorations are questionable both functionally and biologically. Crown lengthening is one of the traditionally performing procedures to visualize and relocate the deep margins, but the limitations of the invasive surgical procedure are anatomical complications like exposure of root concavities or furcation, violation of biological width, post operative discomfort because of sutures or periodontal packs; and less patient compliance. Other than crown lengthening, researchers tried some other techniques like modified matrix adaptation technique, using retraction cord, making holes in matrix band and flowing resin modified glass ionomer cement (RMGIC) to the root or cervical caries, orthodontic extrusion. But most of these procedures are failed to give adequate clinical success. Deep margin elevation (DME) is one of the minimally invasive and successful procedure performing in deep subgingival caries. But the evidences and knowledge in this technique is limited among practitioners. This review is to evaluate the applicability of DME, the current clinical concepts, techniques and materials for DME; and a comparison with traditionally used various techniques for cervical margin relocation also concluding that currently available various clinical parameters with this technique.

Considerations about Cytotoxicity of Resin-Based Composite Dental Materials: A Systematic Review

The dental material industry is rapidly developing resin-based composites (RBCs), which find widespread use in a variety of clinical settings. As such, their biocompatibility has gained increasing interest. This literature review presents a summary of research into the cytotoxicity of methacrylate-based composites published from 2017 to 2023. Subject to analysis were 14 in vitro studies on human and murine cell lines. Cytotoxicity in the included studies was measured via MTT assay, LDH assay, and WST-1 assay. The QUIN Risk of Bias Tool was performed to validate the included studies. Included studies (based entirely on the results of in vitro studies) provide evidence of dose- and time-dependent cytotoxicity of dental resin-based composites. Oxidative stress and the depletion of cellular glutathione (GSH) were suggested as reasons for cytotoxicity. Induction of apoptosis by RBCs was indicated. While composites remain the golden standard of dental restorative materials, their potential cytotoxicity cannot be ignored due to direct long-term exposure. Further in vitro investigations and clinical trials are required to understand the molecular mechanism of cytotoxicity and produce novel materials with improved safety profiles.

Clinical longevity of intracoronal restorations made of gold, lithium disilicate, leucite, and indirect resin composite: a systematic review and meta-analysis

OBJECTIVES

The aim of this systematic review and meta-analysis is to assess the comparative clinical success and survival of intracoronal indirect restorations using gold, lithium disilicate, leucite, and indirect composite materials.

MATERIAL AND METHODS

This systematic review and meta-analysis were conducted following the Cochrane Handbook for Systematic Reviews of Interventions and PRISMA guidelines. The protocol for this study was registered in PROSPERO (registration number: CRD42021233185). A comprehensive literature search was conducted across various databases and sources, including PubMed/Medline, Embase, Cochrane Library, Web of Science, ClinicalTrials.gov, and gray literature. A total of 7826 articles were screened on title and abstract. Articles were not excluded based on the vitality of teeth, the language of the study, or the observation period. The risk difference was utilized for the analyses, and a random-effects model was applied. All analyses were conducted with a 95% confidence interval (95% CI). The calculated risk differences were derived from the combined data on restoration survival and failures obtained from each individual article. The presence of heterogeneity was assessed using the I2 statistic, and if present, the heterogeneity of the data in the articles was evaluated using the non-parametric chi-squared statistic (p < 0.05).

RESULTS

A total of 12 eligible studies were selected, which included 946 restorations evaluated over a minimum observation period of 1 year and a maximum observation period of 7 years. Results of the meta-analysis indicated that intracoronal indirect resin composite restorations have an 18% higher rate of failure when compared to intracoronal gold restorations over 5-7 years of clinical service (risk difference =  - 0.18 [95% CI: - 0.27, - 0.09]; p = .0002; I2 = 0%). The meta-analysis examining the disparity in survival rates between intracoronal gold and leucite restorations could not be carried out due to methodological differences in the studies.

CONCLUSIONS

According to the currently available evidence, medium-quality data indicates that lithium disilicate and indirect composite materials demonstrate comparable survival rates in short-term follow-up. Furthermore, intracoronal gold restorations showed significantly higher survival rates, making them a preferred option over intracoronal indirect resin-composite restorations. Besides that, the analysis revealed no statistically significant difference in survival rates between leucite and indirect composite restorations. The short observation period, limited number of eligible articles, and low sample size of the included studies were significant limitations.

CLINICAL SIGNIFICANCE

Bearing in mind the limitations of the reviewed literature, this systematic review and meta-analysis help clinicians make evidence-based decisions on how to restore biomechanically compromised posterior teeth.

Effects of different exercise modalities on lipid profile in the elderly population: A meta-analysis

BACKGROUND

Dyslipidemia, characterized by elevated total cholesterol (TC), triglycerides, and low-density lipoprotein cholesterol (LDL-C), as well as decreased high-density lipoprotein cholesterol (HDL-C), has long been recognized as a major risk factor for age-related diseases. Recent studies have shown that exercise can be effective in mitigating dyslipidemia in older adults. The aim of this study was to systematically evaluate the effects of different exercise modalities (aerobic exercise [AE], resistance exercise [RE], aerobic+resistance exercise [AE+RE], and high-intensity interval training) on lipid profile in the elderly population, in order to identify the most effective exercise modality for maintaining lipid profile health in older adults.

METHODS

A comprehensive database search of PubMed, EBSCO, Web of Science, China National Knowledge Infrastructure, and Wanfang database. Eligible studies were individually assessed according to the Cochrane Risk of Bias Tool version 2, and the data were analyzed and processed using RevMan 5.4.1 analysis software.

RESULTS

This study identified 20 randomized controlled trials with a total of 988 subjects, of which 541 were in the exercise group and 447 in the control group. Our analysis showed that AE significantly reduced TC (P < .05), triglycerides (P < .01), and LDL-C (P < .01), while increasing HDL-C (P < .01) in the elderly population. RE significantly reduced the elevation of TC (P < .01) and LDL-C (P < .05) indices in the elderly population, while AE+RE had a significant effect on decreasing TC (P < .01) and LDL-C (P < .01) indices.

CONCLUSION

Our analysis indicates that AE is the most effective exercise modality for reducing dyslipidemia in older adults, compared to RE, AE+RE, and high-intensity interval training. These findings suggest that AE should be promoted as an important lifestyle intervention to improve lipid profile health in the elderly population. However, further research is needed to investigate the optimal duration, frequency, and intensity of AE required to achieve the most beneficial effects on lipid profile health in older adults.

Comparison of therapies of white spot lesions: a systematic review and network meta-analysis

OBJECTIVE

White spot lesions (WSLs), the earliest evidence of enamel demineralization, are considered amenable to intervention to achieve a remineralized or arrested state of caries. The management of WSLs is quite challenging, and there is no definitive cure as yet. We performed a network meta-analysis to assess the efficacy of seven therapies for WSLs and gave a hierarchy of them.

MATERIALS AND METHODS

We systematically searched the PubMed, EMBASE, Cochrane, and Web of Science databases (last search: July 2022) to identify all relevant studies. We limited our search to studies published in English. Randomized controlled designed in vitro/clinical trials related to the efficacy of the seven therapies for WSLs were included. Data extraction was performed independently by two reviewers. The risk of bias (ROB) 2.0 tool from Cochrane and a previous in vitro methodological tool will be used for the quality assessment. Variations in quantitative light-induced fluorescence (QLF), laser fluorescence (LF), and lesions area were the primary outcome measures. Standard mean difference (SMD) was used as the effect size for the Network meta-analysis (NMA). Consistency and inconsistency tests were conducted. The hierarchy of 7 treatment effects was evaluated using surface probabilities under cumulative ranking (SUCRA). Publication bias was evaluated using a bias plot.

RESULTS

Forty-two articles were included in the systematic review. Thirty-one of them, with a total of 1906 participants, were included in the network meta-analysis. The studies owned a low and moderate risk of bias. This analysis does not suffer from significant inconsistency. The difference between 4 groups 'self-assembled peptide (SAP) P11-4', 'P11-4 + Fluoride Varnish (FV)', 'Resin Infiltration (RI)', 'casein phosphor peptides-amorphous calcium fluoride phosphate (CPP-ACFP)' and the 'Control' group was found to be statistically significant. Compared to the 'FV' and 'casein phosphor peptides-amorphous calcium phosphate (CPP-ACP)' groups, the 'P11-4 + FV" group and 'RI" group made a significant difference. The hierarchy was evident in the SUCRA values of 7 therapies. P11-4 + FV and RI were considered effective therapies compared to the control group or the FV group (gold standard group).

CONCLUSIONS

The available evidence suggests that resin infiltration and P11-4 in combination with fluoride varnish had advantages over gold standard (FV). The effect of tricalcium phosphate-based drugs and fluoride is not very noticeable. Overall, drugs based on P11-4 and resin infiltration will be better therapies. Using more than two drugs in combination also would increase efficacy.

The Use of Warm Air for Solvent Evaporation in Adhesive Dentistry: A Meta-Analysis of In Vitro Studies

Any excess solvent from dental adhesive systems must be eliminated prior to material photopolymerization. For this purpose, numerous approaches have been proposed, including the use of a warm air stream. This study aimed to investigate the effect of different temperatures of warm air blowing used for solvent evaporation on the bond strength of resin-based materials to dental and nondental substrates. Two different reviewers screened the literature in diverse electronic databases. In vitro studies recording the effect of warm air blowing to evaporate solvents of adhesive systems on the bond strength of resin-based materials to direct and indirect substrates were included. A total of 6626 articles were retrieved from all databases. From this, 28 articles were included in the qualitative analysis, and 27 remained for the quantitative analysis. The results of the meta-analysis for etch-and-rinse adhesives revealed that the use of warm air for solvent evaporation was statistically significantly higher (p = 0.005). For self-etch adhesives and silane-based materials, this effect was observed too (p < 0.001). The use of a warm air stream for solvent evaporation enhanced the bonding performance of alcohol-/water-based adhesive systems for dentin. This effect seems to be similar when a silane coupling agent is submitted to a heat treatment before the cementation of a glass-based ceramic.

Effects of Arginine-calcium carbonate pretreatment on the remineralizing and bonding performance of phosphorylated dentin

OBJECTIVES

To evaluate the effects of Arginine-calcium carbonate (Arg-CaCO₃) paste treatment of phosphorylated dentin on remineralizing and bonding performance during direct and indirect restorations under pulpal pressure.

METHODS

Under simulated pulpal pressure, dentin of healthy third molars were abraded and acid etched for 15s, then randomly divided into 4 groups: negative control group; Arg-CaCO₃ group (1min); 2.5% Sodium trimetaphosphate (STMP) group (3min); S-A group, 2.5% STMP + Arg-CaCO₃. After 24h, remineralization and dentin tubular occlusion were assessed by Attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), Micro-Raman spectroscopy, Vickers hardness, Field-emission scanning electron microscope (FESEM) and Energy X-ray dispersive spectrometer (EDS). The liquid environment was the simulated body fluid (SBF) permeated from dentin tubules due to pulpal pressure. Stick specimens prepared with self-etch dentin adhesive were tested for microtensile bond strength (μTBS) and interfacial silver nanoleakage on both immediate direct restoration and indirect restoration with a 7-day temporary period. Data were analyzed by the Kruskal-Wallis test, Mann-Whitney test, Welch ANOVA or one-way ANOVA and Tukey post hoc test (p < 0.05).

RESULTS

The pretreatment of 2.5% STMP with Arg-CaCO₃ significantly increased relative mineral content by ATR-FTIR, Raman and FESEM-EDS, simultaneously enhancing dentin tubular occlusion (%) and mechanical property to the most considerable extent. Furthermore, the pretreatment significantly promoted the μTBS of indirect restoration and reduced nanoleakage after 7 days.

CONCLUSIONS

The application of Arg-CaCO₃ paste on phosphorylated dentin could improve intra- and extra-tubular mineralization and the stability of adhesion interface.

CLINICAL RELEVANCE

Without exceeding the amount of conventional tooth preparation, combining 2.5% STMP with Arg-CaCO₃ paste before the self-etch bonding system might be a promising clinical strategy to relieve dentin hypersensitivity and strengthen bonding performance efficiently and conveniently.

Effect of Different Application Modalities on the Bonding Performance of Adhesive Systems to Dentin: A Systematic Review and Meta-Analysis

Diverse types of dental adhesives exhibit different cytotoxic outcomes on cells in vitro. Currently, no standard adhesive application technique has so far been decisive for clinicians for better durability of resin-dentin bonds of adhesive systems. The purpose of this study was to systematically review the literature to evaluate the bonding performance of adhesive systems to dentin by using different application modalities. The systematic research strategy was conducted by two reviewers among multiple databases: PubMed, Scopus, Web of Science, Embase, and Scielo. In vitro studies reporting the effects of additional steps for the application of adhesive systems on the bond strength to dentin were selected. Meta-analysis was performed using Review Manager Software version 5.3.5 using the random effects model. The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic review. The electronic research through different databases generated a total of 8318 references. After the examination of titles and abstracts, a total of 106 potentially relevant studies accessed the full-text evaluation phase. After full-text examination, 78 publications were included for the qualitative analysis, and 68 studies were included in the meta-analysis. Regarding the etch-and-rinse adhesive systems, the application modalities that improved the overall bond strength were the application of a hydrophobic resin layer (p = 0.005), an extended application time (p < 0.001), an application assisted by an electric current (p < 0.001), a double-layer application (p = 0.05), the agitation technique (p = 0.02), and the active application of the adhesive (p < 0.001). For self-etch adhesive systems, the techniques that improved the overall bond strength were the application of a hydrophobic resin layer (p < 0.001), an extended application time (p = 0.001), an application assisted by an electric current (p < 0.001), a double-layer application (p < 0.001), the agitation technique (p = 0.01), and the active application of the adhesive (p < 0.001). The in vitro evidence suggests that the application of adhesive systems using alternative techniques or additional strategies may be beneficial for improving their bond strength to dentin. The application modalities that favored the overall bond strength to dentin were an extended application time, a double-layer application, an application assisted by an electric current, the active application of the adhesive, and the application of a hydrophobic resin layer. Worth mentioning is that some techniques are intended to increase the degree of the conversion of the materials, and therefore, improvements in the biocompatibility of the materials can be expected.

Effect of temporary cements and their removal methods on the bond strength of indirect restoration: a systematic review and meta-analysis

OBJECTIVES

For a conventional indirect restoration, temporary cementation inevitably contaminated collapsed dentin collagen. The purpose of this review was to evaluate the optimal strategy for minimizing its negative effects.

MATERIAL AND METHODS

Databases such as PubMed, Web of Science, EMBASE, and the Cochrane Library were searched for in vitro studies, involving the influence of immediate dentin sealing (IDS), different temporary cements, and their removal strategies on dentin bond strength. The meta-analysis used the inverse variance method with effect method of the standardized mean difference and statistical significance at p ≤ 0.05. The I² value and the Q-test were used to assess the heterogeneity.

RESULTS

A total of 14 in vitro trials were subjected to the meta-analysis. Within the study's limitations, we assumed that IDS eliminated the negative effects of temporary bonding, achieving the comparable immediate bond strength with the control (p = 0.46). In contrast, under delayed dentin sealing (DDS), temporary cementation statistically decreased bond strength (p = 0.002). Compared with resin-based and non-eugenol zinc oxide cements, polycarboxylate and calcium hydroxide cements performed better on bond strength with no statistical difference from the control group (p > 0.05). Among the removal methods of temporary cements, the Al₂O₃ abrasion restored the decreased bond strength (p = 0.07) and performed better than hand instruments alone (p = 0.04), while pumice removal slightly reduced the bond strength in contrast with the control group (p = 0.05, 95% CI =  - 1.62 to 0).

CONCLUSIONS

The choices of IDS, polycarboxylate and calcium hydroxide temporary cements, Al₂O₃ abrasion removal method were feasible and efficient to enhance the bond strength.

CLINICAL RELEVANCE

It is worthwhile applying IDS technique, polycarboxylate and calcium hydroxide temporary cements during indirect restoration. The Al₂O₃ abrasion of cleaning dentin can minimize the negative effects of temporary cement.

Appropriate Immediate Dentin Sealing to Improve the Bonding of CAD/CAM Ceramic Crown Restorations

This study aimed to use quantitative and qualitative evaluations based on micro-tensile bond strength (μTBS) to clarify the appropriate immediate dentin sealing (IDS) approach for improving the bonding of CAD/CAM ceramic crown restorations. Forty-eight extracted human molars were prepared to obtain standardized abutment specimens and divided into three groups: no IDS (group C: control), IDS performed by a single application of an all-in-one adhesive system (group A), and IDS performed by the combined application of an adhesive system and a flowable resin composite (group F). All specimens were restored with a ceramic crown fabricated by a chair-side CAD/CAM system and were divided into no-stress and stressed groups. After cyclic loading (78.5 N; total, 3 × 105 cycles; 90 cycles/min) on the specimens in the stressed group, all specimens were sectioned. The μTBS values for the occlusal and mesioaxial walls were measured (n = 16) and analyzed statistically. The quantitative bonding performance of groups A and F were superior to that of group C, regardless of the cyclic loading and abutment wall conditions. Group F showed the maximum bond strength and the highest bond durability in the qualitative bonding performance even under the cyclic loading condition simulating clinical mastication.

Reinforced Immediate Dentin Sealing vs Conventional Immediate Dentin Sealing on Adhesive Behavior of Indirect Restorations: A Systematic Review

AIM

The aim of this systematic review is to compare the bonding performance of indirect restoration with the reinforced immediate dentin sealing (IDS) method as opposed to the conventional IDS method.

MATERIALS AND METHODS

A literature search was conducted in PubMed, Cochrane, and EBSCOHost up to January 31st 2022, accompanied by a hand search in Google Scholar. Inclusion criteria involved studies comparing conventional IDS and reinforced IDS protocol and evaluating various parameters influencing the bonding performance, such as type of indirect restoration, etching protocol, cavity design, tooth surface preparation, method of oral cavity simulation, and processing after luting. The quality of six included studies was appraised using CRIS guidelines.

RESULTS

A total of 29 publications was identified, and 6 of them fulfilled the inclusion criteria. All of the included studies were in vitro studies. The predetermined data were independently extracted and evaluated by four reviewers. It was observed that most of the studies showed an improvement in bond strength with reinforced IDS when compared with conventional IDS. Also, etch-and-rinse and 2-step self-etch adhesive protocols have shown better bonding performance than universal adhesive systems.

CONCLUSION

Reinforced IDS has similar or better bond strength to that of conventional IDS strategies. The need for prospective studies is highlighted. The future clinical studies for immediate dentin sealing ought to be reported in a uniform and methodological way.

CLINICAL SIGNIFICANCE

Application of an additional layer of low-viscosity resin composite provides a thicker adhesive layer, prevents re-exposure of dentin during the final restoration, and allows a smoother preparation in lesser clinical chair time and eliminates any possible undercuts. Thus, reinforced IDS has shown to result in better preservation of the dentinal seal than IDS technique.

Effect of Different Desensitizers on Shear Bond Strength of Self-Adhesive Resin Cements to Dentin

The sealing and bonding characteristics of luting cements may be affected by the application of desensitizers containing ingredients that induce chemical interaction with dentin organic matrix. This study evaluated the effect of different desensitizers on the immediate and long-term shear bond strength (SBS) of a self-adhesive resin cement (SARC) to dentin. Healthy bovine dentin specimens were used for the study. Gluma® Desensitizer, Desensibilize Nano P®, and Soothe® desensitizer were used in study groups, while the control group did not receive any treatment. Next, SARC (RelyXTM U200) in cylindrical mold was applied to the sample surface. All specimens were stored at 37 °C for 24 h or six months and tested for SBS. Additionally, water contact angle was measured using an optical tensiometer. Results were analyzed by analysis of variance and Student-t tests (p ˂ 0.05). Application of the different types of desensitizers had no significant influence on immediate or long-term SBS of SARC to dentin (p > 0.05). Differences for water contact angle were not statistically significant among the tested groups (p = 0.450). Within the limitations of the present study, it can be concluded that the application of the different types of desensitizers had no significant influence on the SBS of a SARC to dentin.

Disinfection Procedures and Their Effect on the Microorganism Colonization of Dental Impression Materials: A Systematic Review and Meta-Analysis of In Vitro Studies

Dental impressions are contaminated with potentially pathogenic microorganisms when they come into contact with patient blood, saliva, and plaque. Numerous disinfectants are used; however, no sole disinfectant can be designated as universal for all the impression materials. Thus, the aim of this study is to systemically review the literature to evaluate the effect of the existing disinfection procedures on the bacterial colonization of dental impression materials. This systematic review and meta-analysis was conducted according to the PRISMA statement. PubMed (MEDLINE), Web of Science, Scopus, EMBASE, and SciELO databases were screened up to April 2021. Eligibility criteria included in vitro studies reporting the antibacterial activity of disinfectant solutions in dental impression materials. The meta-analysis was performed using Review Manager (version 5.3.5). A global comparison was performed with the standardized mean difference based on random-effect models at a significance level of α = 0.05. A total of seven studies were included in the meta-analysis. The included studies described the effect of disinfection processes with chlorhexidine gluconate, alcohol, sodium hypochlorite, glutaraldehyde, and hydrogen peroxide in alginate, polyvinyl siloxane, and polyether impression materials. The meta-analyses showed that the use of chlorhexidine, alcohol, glutaraldehyde, and sodium hypochlorite reduced the colony-forming units by a milliliter (CFU/mL) in alginate (p < 0.001). On the other hand, glutaraldehyde, sodium hypochlorite, and alcohol reduced the CFU/mL in polyvinyl siloxane (p < 0.001). Finally, alcohol and glutaraldehyde reduced the CFU/mL in polyether material (p < 0.001). High heterogenicity was observed for the alginate and polyvinyl siloxane materials (I2 = 74%; I2 = 90%). Based on these in vitro studies, the disinfection of impression materials with several disinfection agents reduces the CFU/mL count.