Formulation Development and Ex-Vivo Permeability of Curcumin Hydrogels under the Influence of Natural Chemical Enhancers

Antimicrobial activity of octyl gallate nanoemulsion combined with photodynamic technology and its effect on food preservation

Photodynamic inactivation, as a safe and effective antimicrobial technology that does not damage the organoleptic properties of the food itself, decreases the use of preservatives and is gradually gaining attention in the food industry. This study selected octyl gallate (OG) as an antimicrobial photosensitizer with eucalyptus oil as the oil phase and prepared it as an octyl gallate nanoemulsion (OG-NE) to ensure the delivery of the photosensitizer. Escherichia coli and Staphylococcus aureus inactivation with the OG-NE combined with photodynamic technology, as well as the effect on the quality of food products, was investigated. The results showed the successful preparation and homogeneous distribution of the OG-NE with an encapsulation rate of 85.18 %. The OG-NE's ability to produce single oxygen (1O2) was significantly higher, as shown by 1O2 production. The OG-NE combined photodynamic technique confirmed the effectiveness of microbial removal, demonstrating a significant increase in reactive oxygen species (ROS) and the permeability of the cell membrane. The effect of the OG-NE combined photodynamic technology on perch (microbiology, pH, whiteness, water holding capacity, TVB-N and TBA) and litchi (weight loss, titratable acid and sugar content) preservation was assessed. Food preservation experiments revealed that the OG-NE combined photodynamic technology exhibited a positive effect on food quality. The results indicated that the combination of the OG-NE and photodynamic technology provided a new alternative strategy for the food industry in antimicrobial and preservation.

Curcumin-loaded gold nanoparticles with enhanced antibacterial efficacy and wound healing properties in diabetic rats

Diabetic wounds pose a significant global health challenge. Although curcumin exhibits promising wound healing and antibacterial properties, its clinical potential is limited by low aqueous solubility, and poor tissue penetration. This study aimed to address these challenges and enhance the wound healing efficacy of curcumin by loading it onto gold nanoparticles (AuNPs). The properties of the AuNPs, including particle size, polydispersity index (PDI), zeta potential, percent drug entrapment efficiency (%EE) and UV-Vis spectra were significantly influenced by the curcumin/gold chloride molar ratio used in the synthesis of AuNPs. The optimal formulation (F2) exhibited the smallest particle size (41.77 ± 6.8 nm), reasonable PDI (0.59 ± 0.17), high %EE (94.43 ± 0.25 %), a moderate zeta potential (-8.44 ± 1.69 mV), and a well-defined surface Plasmon resonance peak at 526 nm. Formulation F2 was incorporated into Pluronic® F127 gel to facilitate its application to the skin. Both curcumin AuNPs solution and gel showed sustained drug release and higher skin permeation parameters compared with the free drug solution. AuNPs significantly enhanced curcumin's antibacterial efficacy by lowering the minimum inhibitory concentrations and enhancing antibacterial biofilm activity against various Gram-positive and Gram-negative bacterial strains. In a diabetic wound rat model, AuNPs-loaded curcumin exhibited superior wound healing attributes compared to the free drug. Specifically, it demonstrated improved wound healing percentage, reduced wound oxidative stress, increased wound collagen deposition, heightened anti-inflammatory effects, and enhanced angiogenesis. These findings underscore the potential of AuNPs as efficacious delivery systems of curcumin for improved wound healing applications.

Hydrogels with Essential Oils: Recent Advances in Designs and Applications

The innovative fusion of essential oils with hydrogel engineering offers an optimistic perspective for the design and development of next-generation materials incorporating natural bioactive compounds. This review provides a comprehensive overview of the latest advances in the use of hydrogels containing essential oils for biomedical, dental, cosmetic, food, food packaging, and restoration of cultural heritage applications. Polymeric sources, methods of obtaining, cross-linking techniques, and functional properties of hydrogels are discussed. The unique characteristics of polymer hydrogels containing bioactive agents are highlighted. These include biocompatibility, nontoxicity, effective antibacterial activity, control of the sustained and prolonged release of active substances, optimal porosity, and outstanding cytocompatibility. Additionally, the specific characteristics and distinctive properties of essential oils are explored, along with their extraction and encapsulation methods. The advantages and disadvantages of these methods are also discussed. We have considered limitations due to volatility, solubility, environmental factors, and stability. The importance of loading essential oils in hydrogels, their stability, and biological activity is analyzed. This review highlights through an in-depth analysis, the recent innovations, challenges, and future prospects of hydrogels encapsulated with essential oils and their potential for multiple applications including biomedicine, dentistry, cosmetics, food, food packaging, and cultural heritage conservation.

Potential anti-aging applications of microbial-derived surfactantsin cosmetic formulations

The skin aging process is a complex interaction of genetic, epigenetic, and environmental factors, such as chemical pollution and UV radiation. There is growing evidence that biosurfactants, especially those of microbial origin, have distinct age-supportive effects through different mechanisms, such as stimulation of fibroblast growth, high antioxidant capacities, and favorable anti-inflammatory properties. With a growing financial contribution of more than 15 m€per year, microbial surfactants (MSs) display unique biological effects on the skin including improved cell mobility, better nutrient access, and facilitated cellular growth under harsh conditions. Their biodegradable nature, unusual surface activity, good safety profile and tolerance to high temperature and pH variations widen their potential spectrum in biomedical and pharmaceutical applications. MSs typically have lower critical micelle concentration (CMC) levels than chemical surfactants enhancing their effectiveness. As natural surfactants, MSs are considered possible "green" alternatives to synthetic surfactants with better biodegradability, sustainability, and beneficial functional properties. This review therefore aims to explore the potential impacts of MSs as anti-aging ingredients.

Tackling acne vulgaris by fabrication of tazarotene-loaded essential oil-based microemulsion: In vitro and in vivo evaluation

This study aimed to formulate and optimize an anti-acne drug namely tazarotene (TZR) in essential oil-based microemulsion (ME) using either Jasmine oil (Jas) or Jojoba oil (Joj). TZR-MEs were prepared using two experimental designs (Simplex Lattice Design®) and characterized for droplet size, polydispersity index, and viscosity. Further in vitro, ex vivo, and in vivo investigations were performed for the selected formulations. Results revealed that TZR-selected MEs exhibited suitable droplet size, homogenous dispersions, and acceptable viscosity, in addition to spherical-shaped particles in morphology. The ex vivo skin deposition study showed a significant TZR accumulation in all skin layers for the Jas-selected ME over the Joj one. Further, TZR didn't show any antimicrobial activity against P. acnes, however, it was boosted when it was incorporated into the selected MEs. The in vivo study results of the infected mice ears induced by P. acnes revealed that our selected MEs successfully reached a high level of ear thickness reduction of 67.1% and 47.4% for Jas and Joj selected MEs, respectively, versus only 4% for the market product. Finally, the findings confirmed the ability to use essential oil-based ME, particularly with Jas, as a promising carrier for topical TZR delivery in the treatment of acne vulgaris.

Hydroxypropyl Methylcellulose Bioadhesive Hydrogels for Topical Application and Sustained Drug Release: The Effect of Polyvinylpyrrolidone on the Physicomechanical Properties of Hydrogel

Hydrogels are homogeneous three-dimensional polymeric networks capable of holding large amounts of water and are widely used in topical formulations. Herein, the physicomechanical, rheological, bioadhesive, and drug-release properties of hydrogels containing hydroxypropyl methylcellulose (HPMC) and polyvinylpyrrolidone (PVP) were examined, and the intermolecular interactions between the polymers were explored. A three-level factorial design was used to form HPMC-PVP binary hydrogels. The physicomechanical properties of the binary hydrogels alongside the homopolymeric HPMC hydrogels were characterized using a texture analyzer. Rheological properties of the gels were studied using a cone and plate rheometer. The bioadhesiveness of selected binary hydrogels was tested on porcine skin. Hydrophilic benzophenone-4 was loaded into both homopolymeric and binary gels, and drug-release profiles were investigated over 24 h at 33 °C. Fourier transform infrared spectroscopy (FTIR) was used to understand the inter-molecular drug-gel interactions. Factorial design analysis supported the dominant role of the HPMC in determining the gel properties, rather than the PVP, with the effect of both polymer concentrations being non-linear. The addition of PVP to the HPMC gels improved adhesiveness without significantly affecting other properties such as hardness, shear-thinning feature, and viscosity, thereby improving bioadhesiveness for sustained skin retention without negatively impacting cosmetic acceptability or ease of use. The release of benzophenone-4 in the HPMC hydrogels followed zero-order kinetics, with benzophenone-4 release being significantly retarded by the presence of PVP, likely due to intermolecular interactions between the drug and the PVP polymer, as confirmed by the FTIR. The HPMC-PVP binary hydrogels demonstrate strong bioadhesiveness resulting from the addition of PVP with desirable shear-thinning properties that allow the formulation to have extended skin-retention times. The developed HPMC-PVP binary hydrogel is a promising sustained-release platform for topical drug delivery.

Curcumin/Fusidic Acid Bitherapy Loaded Mixed Micellar Nanogel for Acne Vulgaris Treatment: In Vitro and In Vivo Studies

The combination of herbal drugs with a topical antibacterial for managing a chronic disease like acne vulgaris has emerged lately to settle side effects and bacterial multidrug resistance. Mixed micelles (MMs) incorporated into nanogel were explored for hybrid delivery of curcumin (Cur) and fusidic acid (FA) combination presenting a multi-strategic treatment. Curcumin-fusidic acid-loaded mixed micelles (Cur-FA-MMs) were assessed for size, surface charge, compatibility, in vitro release, and encapsulation. The selected formula was further loaded into nanogel and investigated for viscosity, ex vivo permeation, and in vivo potential. Cur-FA-MMs exhibited uniform nanosized spherical morphology, and negative surface charge affording high encapsulation for both drugs with a biphasic in vitro release over a period of 48h and good colloidal stability. The attained Cur-FA-MM-loaded nanogel had optimum viscosity with remarkable permeation coefficient values nearly 2-fold that related to plain nanogel. The pharmacodynamic effect of Cur on FA was pronounced by the significant improvement of the skin's degree of inflammation, epidermal hypertrophy, and congestion in animals treated with Cur-FA-MM-loaded nanogel. In conclusion, micellar nanogel could enable the progressive effect of Cur (an antioxidant with reported antibiotic activity) on FA (antibiotic) and decrease the risk of emerging antibiotic resistance by enhancing the solubility and permeation of Cur.

From Plants to Wound Dressing and Transdermal Delivery of Bioactive Compounds

Transdermal delivery devices and wound dressing materials are constantly improved and upgraded with the aim of enhancing their beneficial effects, biocompatibility, biodegradability, and cost effectiveness. Therefore, researchers in the field have shown an increasing interest in using natural compounds as constituents for such systems. Plants, as an important source of so-called "natural products" with an enormous variety and structural diversity that still exceeds the capacity of present-day sciences to define or even discover them, have been part of medicine since ancient times. However, their benefits are just at the beginning of being fully exploited in modern dermal and transdermal delivery systems. Thus, plant-based primary compounds, with or without biological activity, contained in gums and mucilages, traditionally used as gelling and texturing agents in the food industry, are now being explored as valuable and cost-effective natural components in the biomedical field. Their biodegradability, biocompatibility, and non-toxicity compensate for local availability and compositional variations. Also, secondary metabolites, classified based on their chemical structure, are being intensively investigated for their wide pharmacological and toxicological effects. Their impact on medicine is highlighted in detail through the most recent reported studies. Innovative isolation and purification techniques, new drug delivery devices and systems, and advanced evaluation procedures are presented.

QbD-Optimized, Phospholipid-Based Elastic Nanovesicles for the Effective Delivery of 6-Gingerol: A Promising Topical Option for Pain-Related Disorders

In this study, elastic nanovesicles, constructed of phospholipids optimized by Quality by Design (QbD), release 6-gingerol (6-G), a natural chemical that may alleviate osteoporosis and musculoskeletal-related pain. A 6-gingerol-loaded transfersome (6-GTF) formulation was developed using a thin film and sonication approach. 6-GTFs were optimized using BBD. Vesicle size, PDI, zeta potential, TEM, in vitro drug release, and antioxidant activity were evaluated for the 6-GTF formulation. The optimized 6-GTF formulation had a 160.42 nm vesicle size, a 0.259 PDI, and a -32.12 mV zeta potential. TEM showed sphericity. The 6-GTF formulation's in vitro drug release was 69.21%, compared to 47.71% for the pure drug suspension. The Higuchi model best described 6-G release from transfersomes, while the Korsmeyer-Peppas model supported non-Fickian diffusion. 6-GTF had more antioxidant activity than the pure 6-G suspension. The optimized transfersome formulation was converted into a gel to improve skin retention and efficacy. The optimized gel had a spreadability of 13.46 ± 4.42 g·cm/s and an extrudability of 15.19 ± 2.01 g/cm². The suspension gel had a 1.5 μg/cm²/h ex vivo skin penetration flux, while the 6-GTF gel had 2.71 μg/cm²/h. Rhodamine B-loaded TF gel reached deeper skin layers (25 μm) compared to the control solution in the CLSM study. The gel formulation's pH, drug concentration, and texture were assessed. This study developed QbD-optimized 6-gingerol-loaded transfersomes. 6-GTF gel improved skin absorption, drug release, and antioxidant activity. These results show that the 6-GTF gel formulation has the ability to treat pain-related illnesses effectively. Hence, this study offers a possible topical treatment for conditions connected to pain.

Next-Generation Hydrogels as Biomaterials for Biomedical Applications: Exploring the Role of Curcumin

Since the first report on the pharmacological activity of curcumin in 1949, enormous amounts of research have reported diverse activities for this natural polyphenol found in the dietary spice turmeric. However, curcumin has not yet been used for human application as an approved drug. The clinical translation of curcumin has been hampered due to its low solubility and bioavailability. The improvement in bioavailability and solubility of curcumin can be achieved by its formulation using drug delivery systems. Hydrogels with their biocompatibility and low toxicity effects have shown a substantial impact on the successful formulation of hydrophobic drugs for human clinical trials. This review focuses on hydrogel-based delivery systems for curcumin and describes its applications as anti-cancer as well as wound healing agents.

Formulation and Characterization of Ethyl Cellulose-Based Patches Containing Curcumin-Chitosan Nanoparticles for the Possible Management of Inflammation via Skin Delivery

Curcumin, a natural phenolic compound, exhibits poor absorption and extensive first pass metabolism after oral administration. In the present study, curcumin-chitosan nanoparticles (cur-cs-np) were prepared and incorporated into ethyl cellulose patches for the management of inflammation via skin delivery. Ionic gelation method was used for the preparation of nanoparticles. The prepared nanoparticles were evaluated for size, zetapotential, surface morphology, drug content, and % encapsulation efficiency. The nanoparticles were then incorporated into ethyl cellulose-based patches using solvent evaporation technique. ATR-FTIR was used to study/assess incompatibility between drug and excipients. The prepared patches were evaluated physiochemically. The in vitro release, ex vivo permeation, and skin drug retention studies were carried out using Franz diffusion cells and rat skin as permeable membrane. The prepared nanoparticles were spherical, with particle size in the range of 203–229 nm, zetapotential 25–36 mV, and PDI 0.27–0.29 Mw/Mn. The drug content and %EE were 53% and 59%. Nanoparticles incorporated patches are smooth, flexible, and homogenous. The in vitro release and ex vivo permeation of curcumin from nanoparticles were higher than the patches, whereas the skin retention of curcumin was significantly higher in case of patches. The developed patches deliver cur-cs-np into the skin, where nanoparticles interact with skin negative charges and hence result in higher and prolonged retention in the skin. The higher concentration of drug in the skin helps in better management of inflammation. This was shown by anti-inflammatory activity. The inflammation (volume of paw) was significantly reduced when using patches as compared to nanoparticles. It was concluded that the incorporation of cur-cs-np into ethyl cellulose-based patches results in controlled release and hence enhanced anti-inflammatory activity.

Formulation, In Vitro and In Silico Evaluations of Anise (Pimpinella anisum L.) Essential Oil Emulgel with Improved Antimicrobial Effects

Over the past decade, researchers have made several efforts to develop gel-based formulations that provide an alternative to traditional hydrogels and emulgel. Due to its excellent antibacterial properties, anise, the main constituent of Pimpinella anisum L., widely used in pharmaceuticals, was selected as the active ingredient in this study. Since many bacteria have developed considerable antibiotic resistance, this research aimed to develop an herbal emulgel for treating skin infections caused by bacteria. Given these obstacles, we developed and evaluated a new, cost-effective topical emulgel solution containing anise essential oil against Escherichia coli (E. coli). Anise-based emulgels, potential drug delivery platforms, have been evaluated for various parameters, including physical properties, viscosity, pH, rheology, encapsulation efficiency, and in vitro release research. The AEOs emulgel demonstrated remarkable colloidal stability, with a zeta potential of 29 mV, a size of 149.05 nm, and considerable polydispersity. The efficacy of anise-loaded emulgels as antibacterial formulations was evaluated in vitro. E. coli was used as a model microbial organism for the antibacterial study. Human keratinocytes (HaCaT) were used to examine the biocompatibility of the emulgel. Molecular docking revealed that the essential oil components of Pimpinella anisum L. possess a high affinity for the bacterial adhesin protein FimH of E. coli. These findings indicate that the developed AEOs have the potential to be analyzed using E. coli as a model organism.

Formulation Development and In Vitro/In Vivo Characterization of Methotrexate-Loaded Nanoemulsion Gel Formulations for Enhanced Topical Delivery

Methotrexate-loaded oil-in-water nanoemulsion formulations were prepared using the high shear homogenization technique. A drug excipient study (ATR-FTIR) was carried out to investigate the compatibility between the drug, the polymers, and its admixtures. The thermal stability of the nanoemulsion formulations was evaluated by subjecting them to a heating and cooling cycle. The prepared nanoemulsion formulations (FNE1 to FNE6) were evaluated for particle size, PDI value, and entrapment efficiency (EE). They were analyzed for morphological information using transmission electron microscopy. The drug (methotrexate)-loaded nanoemulsion formulations (FNE2, FNE4, and FNE6) were then converted into nanoemulsion gel formulations by adding 1% chitosan (polymer) as a gelling agent. The nanoemulsion gel formulations (FNEG2, FNEG4, and FNEG6) were investigated for physicochemical parameters, viscosity, spreadability, extrudability, drug content, and skin irritation. Various penetration enhancers (olive oil, clove, and almond oil) were employed to examine the potency of the prepared nanoemulsion gel formulations. In vitro drug release, ex vivo permeation, skin drug retention, and stability tests were carried out for evaluation of the prepared nanoemulsion gel formulations (FNEG2, FNEG4, and FNEG6). The data obtained from the in vitro study were subjected to the kinetic model, and the Korsemeyer-Peppas model was best fitted to the data. The nanoemulsion gel formulation FNEG6 showed the maximum controlled drug release and followed an anomalous, non-Fickian release mechanism. The use of almond oil in the preparation of the nanoemulsion gel formulation FNEG6 helped the penetration of the drug across stratum corneum and the restructuring of the properties of skin and resulted in a higher penetration and retention of methotrexate in a deeper layer of the skin. The current study concluded that the methotrexate-loaded nanoemulsion gel formulation FNEG6 showed the best optimum release, permeation, and retention results as compared to the available oral tablets' formulations, followed by a low serum concentration and the maximum drug retention, which is beneficial in treating skin infections and reducing systemic toxicity.

Preparation and In Vitro Evaluation of Controlled-Release Matrices of Losartan Potassium Using Ethocel Grade 10 and Carbopol 934P NF as Rate-Controlling Polymers

Controlled-release formulations are essential for those drugs that require fine tuning of their activity to increase the ratio between therapeutic vs. adverse effects. Losartan potassium is among those drugs whose adverse effects may somehow impair its purported benefits. Previous investigations have been carried out to ascertain the suitability of several polymers for being associated with losartan. This study is focused on the effects of Ethocel grade 10 and Carbopol 934P NF on losartan release. Flow and physical properties were assessed according to the protocols standardized by the pharmacopeia (USP-NF 29), and the drug release in phosphate buffer (pH = 6.8) was measured for 24 h. Data evidenced good to excellent flow and physical properties according to the drug/polymer ratio and the addition of co-excipients. The release rate in 24 h was found to be 63–69% to 79–82% without or with the addition of co-excipients, respectively, following zero-order kinetics. The results also suggest a significant difference with the release profile of a traditional release losartan formulation. The results suggest the suitability of Ethocel grade 10 and Carbopol 934P NF as components of a controlled-release losartan formulation.