Kinetic Evaluation of Dye Decolorization by Fenton Processes in the Presence of 3-Hydroxyanthranilic Acid

Design of a New Catalyst, Manganese(III) Complex, for the Oxidative Degradation of Azo Dye Molecules in Water Using Hydrogen Peroxide

In the current work, chloro(meso-tetrakis(phenyl)porphyrin) manganese(III) [Mn(TPP)Cl] was synthesized following two steps: the preparation of meso-tetraphenylporphyrin (H⁠2TPP) and the insertion of manganese into the free porphyrin H2TPP. The compounds were characterized using SEM, FT-IR, UV, TGA/DTA, and XRD analyses. Manganese(III) meso-porphyrins exhibited hyper-type electronic spectra with a half-vacant metal orbital with symmetry, such as [dπ:dxz and dyz]. The thermal behavior of [Mn(TPP)(Cl)] changed (three-step degradation process) compared to the initial H2TPP (one-step degradation process), confirming the insertion of manganese into the core of the free porphyrin H2TPP. Furthermore, [Mn(TPP)Cl] was used to degrade calmagite (an azo dye) using H2O2 as an oxidant. The effects of dye concentration, reaction time, H2O2 dose, and temperature were investigated. The azo dye solution was completely degraded in the presence of [Mn(TPP)(Cl)]/H2O2 at pH = 6, temperature = 20 °C, C0 = 30 mg/L, and H2O2 = 40 mL/L. The computed low activation energy (Ea = 10.55 Kj/mol) demonstrated the efficiency of the proposed catalytic system for the azo dye degradation. Overall, based on the synthesis process and the excellent catalytic results, the prepared [Mn(TPP)Cl] could be used as an effective catalyst for the treatment of calmagite-contaminated effluents.

UV light and Fe2+ catalysed COD removal of AO 8 using NaOCl as oxidant

The present study aims to establish NaOCl as a potential oxidant in the COD removal of Acid Orange 8 using UVC light (λ = 254 nm) and Fe2+ as catalysts. The different systems used in this study are NaOCl, Fe2+/NaOCl, UV/NaOCl, and Fe2+/NaOCl/UV. All these process were found to be operative in acidic, neutral and basic medium. The initial decolorisation and COD removal efficiency (CODeff) for different systems follow the order: Fe2+/NaOCl/UV > UV/NaOCl > Fe2+/NaOCl > NaOCl. Nevertheless, NaOCl can alone be used in the treatment process considering its CODeff to the extent of 95% in 90 min. The change in pH of the solutions after treatment is an important observation - for non-UV systems it remained around 11.0 and 7.0 in other systems. Thus, UV systems are environmental benign. The effect of various anions on CODeff was tested in Fe2+ systems. Presence of F- ions were found to accelerate CODeff in both the systems. However, the effect is more pronounced in Fe2+/ NaOCl/UV, where complete CODeff was observed in the presence of 9.0 gl-1 of F-. The COD removal kinetics for all systems was studied using zero-order, first-order, second-order, and BMG kinetic models. BMG model was found to be more suitable among all and is in good agreement with CODeff of all systems. It is, therefore, established that NaOCl can serve as a powerful oxidant in the advanced oxidation process.

Eco-friendly oxidation of a reactive textile dye by CaO2: effects of specific independent parameters

Textile wastewater containing dyes poses significant risks to the environment. Advanced oxidation processes (AOPs) effectively eliminate dyes by converting them into harmless substances. However, AOPs have drawbacks such as sludge formation, metal toxicity, and high cost. As an alternative to AOPs, calcium peroxide (CaO2) offers an eco-friendly and potent oxidant for dye removal. Unlike certain AOPs that generate sludge, CaO2 can be directly employed without resulting in sludge formation. This study examines the use of CaO2 for oxidizing Reactive Black 5 (RB5) in textile wastewater without any activator. Various independent factors-pH, CaO2 dosage, temperature, and certain anions-were investigated for their influence on the oxidation process. The effects of these factors on dye oxidation were analyzed using the Multiple Linear Regression Method (MLR). CaO2 dosage was determined to be the most influential parameter for RB5 oxidation, while the optimal pH for oxidation with CaO2 was found to be 10. The study determined that 0.5 g of CaO2 achieved approximately 99% efficiency in oxidizing 100 mg/L of RB5. Additionally, the study revealed that the oxidation process is endothermic, with an activation energy (Ea) and standard enthalpy (ΔH°) for RB5 oxidation by CaO2 determined as 31.135 kJ mol-1 and 110.4 kJ mol-1, respectively. The presence of anions decreased RB5 oxidation, with decreasing effectiveness observed in the order of PO43-, SO42-, HCO3-, Cl-, CO32-, and NO3-. Overall, this research highlights CaO2 as an effective, easy-to-use, eco-friendly, and cost-efficient method for removing RB5 from textile wastewater.

Pd/MIL-100(Fe) as hydrogen activator for FeIII/FeII cycle: Fenton removal of sulfamethazine

Masses of iron sludge generated from engineering practice of classic Fenton reaction constraints its further promotion. Accelerating the FeIII/FeII cycle may be conducive to reducing the initial ferrous slat dosage and the final iron sludge. Based on the reduction of Pd/MIL-100(Fe)-activated hydrogen, an improved Fenton system named MHACF-MIL-100(Fe) was developed at ambient temperature and pressure. 97.8% of sulfamethazine, the target pollutant in this work, could be degraded in 5 min under the conditions of 20 mM H2O2, 25 μM ferrous chloride, initial pH 3.0, 2 g·L-1 composite catalyst Pd/MIL-100(Fe) and hydrogen gas 60 mL·min-1. Combining density functional theory (DFT) calculation and intermediate detection, the degradation of this antibiotic was inferred to start from the cleavage of N-S bond. The catalytic of Pd/MIL-100(Fe), demonstrated by the removal efficiency of SMT and the catalyst morphology, remained intact after six reaction cycles. The present study provides an insight into the promotion of Fenton reaction.

Management of Agricultural Water Containing Acetimidothioic Acid Pesticide through Catalytic Oxidation to Facilitate Reclaimed Water Recycling for Sustainable Food Production

Agro-industrial discharge contains acetimidothioic acid, which is commercially named “Lanox 90” and is a widely applied insecticide in greenhouses, and the result is wastewater loaded with this insecticide. Treating such wastewater is a must to reduce the environmental impact as well as to facilitate the opportunity for water recycling. Thus, the present work introduced Montmorillonite (MMT) clay as a novel Fenton reaction source to treat wastewater loaded with Lanox 90 insecticide as a benign sustainable strategy. Scanning electron microscopy (SEM) supported with energy-dispersive X-ray spectroscopy (EDX) and Fourier-transform infrared spectroscopy (FTIR) were used to characterize the MMT sample. Response surface methodology based on Box–Behnken analysis was selected to optimize the parametric circumstances. The optimized parameters of the proposed technique were obtained at a pH of 2.6 with the addition of 0.8 and 854 mg/L of MMT and H2O2, respectively, to attain the highest predicted Lanox 90 removal rate of 97%. Analysis of variance (ANOVA) was used to examine the statistical data and displayed a significant quadratic model. Ultimately, the results reveal that the oxidation system is exothermic and has a non-spontaneous nature, and the reaction kinetics are categorized according to the second-order reaction kinetic rate. The results of the current study indicate the importance of MMT for treating wastewater. These results confirm the possibility of using oxidation technique as a suitable candidate for greenhouse effluent management to enhance the efficiency of water recycling for smart irrigation.

Effective Removal of Glyphosate from Aqueous Systems Using Synthesized PEG-Coated Calcium Peroxide Nanoparticles: Kinetics Study, H2O2 Release Performance and Degradation Pathways

Glyphosate (N-phosphonomethyl glycine) is a non-selective, broad-spectrum organophosphate herbicide. Its omnipresent application with large quantity has made glyphosate as a problematic contaminant in water. Therefore, an effective technology is urgently required to remove glyphosate and its metabolites from water. In this study, calcium peroxide nanoparticles (nCPs) were functioned as an oxidant to produce sufficient hydroxyl free radicals (·OH) with the presence of Fe²⁺ as a catalyst using a Fenton-based system. The nCPs with small particle size (40.88 nm) and high surface area (28.09 m²/g) were successfully synthesized via a co-precipitation method. The synthesized nCPs were characterized using transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), Brunauer-Emmett-Teller analysis (BET), dynamic light scattering (DLS), and field emission scanning electron microscopy (FESEM) techniques. Under the given conditions (pH = 3.0, initial nCPs dosage = 0.2 g, Ca²⁺/Fe²⁺ molar ratio = 6, the initial glyphosate concentration = 50 mg/L, RT), 99.60% total phosphorus (TP) removal and 75.10% chemical oxygen demand (COD) removal were achieved within 75 min. The degradation process fitted with the Behnajady-Modirshahla-Ghanbery (BMG) kinetics model. The H₂O₂ release performance and proposed degradation pathways were also reported. The results demonstrated that calcium peroxide nanoparticles are an efficient oxidant for glyphosate removal from aqueous systems.

A novel approach to redox active polymers: Decolorization of methylene blue by heterogeneous reduction with redox active azo polymer

The existing reducing agents used in the literature to decolorization of methylene blue are soluble in water and the reduction process is carried out in a homogeneous redox reaction medium. After the decolorization process, the reducing agents and its by-products remain in a homogeneous redox reaction medium. Many of these reducing agents are toxic and cause chemical pollution of textile wastewater. Therefore, there is a need for reducing agents that can be mixed heterogeneously with water from which the reducing agent can be easily removed from a redox reaction medium. For this purpose, water-insoluble redox active azo polymer was synthesized from redox active 1,4-dihydroxybenzene and p-phenylenediamine. The synthesized redox active azo polymer was used for decolorization of methylene blue by heterogeneous reduction and various kinetic parameters were investigated for this redox reaction. At the same time, the investigated results of azo polymer and monomer (1,4-dihydroxybenzene) were compared.

Oxidative stress facilitates infection of the unicellular alga Haematococcus pluvialis by the fungus Paraphysoderma sedebokerense

Background

The green microalga Haematococcus pluvialis is used as a cell factory for producing astaxanthin, the high-value carotenoid with multiple biological functions. However, H. pluvialis is prone to the infection by a parasitic fungus Paraphysoderma sedebokerense, which is the most devastating threat to the mass culture of H. pluvialis all over the world. Through dissecting the mechanisms underlying the infection process, effective measures could be developed to mitigate the pathogen threatening for the natural astaxanthin industry. By far, understanding about the interaction between the algal host and fungal pathogen remains very limited.

Results

We observed that there were heat-stable substances with small molecular weight produced during the infection process and enhanced the susceptibility of H. pluvialis cells to the pathogen. The infection ratio increased from 10.2% (for the algal cells treated with the BG11 medium as the control) to 52.9% (for the algal cells treated with supernatant contained such substances) on the second day post-infection, indicating the yet unknown substances in the supernatant stimulated the parasitism process. Systematic approaches including multi-omics, biochemical and imaging analysis were deployed to uncover the identity of the metabolites and the underlying mechanisms. Two metabolites, 3-hydroxyanthranilic acid and hordenine were identified and proved to stimulate the infection via driving oxidative stress to the algal cells. These metabolites generated hydroxyl radicals to disrupt the subcellular components of the algal cells and to make the algal cells more susceptible to the infection. Based on these findings, a biosafe and environment-friendly antioxidant butylated hydroxyanisole (BHA) was selected to inhibit the fungal infection, which completely abolished the infection at 12 ppm. By applying 7 ppm BHA every 2 days to the algal cell culture infected with P. sedebokerense in the 100 L open raceway ponds, the biomass of H. pluvialis reached 0.448 g/L, which was comparable to that of the control (0.473 g/L).

Conclusions

This study provides for the first time, a framework to dissect the functions of secondary metabolites in the interaction between the unicellular alga H. pluvialis and its fungal parasite, indicating that oxidative degradation is a strategy used for the fungal infest. Eliminating the oxidative burst through adding antioxidant BHA could be an effective measure to reduce parasitic infection in H. pluvialis mass culture.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02140-y.

Is degradation of dyes even possible without using photocatalysts? - a detailed comparative study

Herein, catalyst-free, eco-friendly, photo-triggered, self-degradation of malachite green (MG) and crystal violet (CV) dyes in comparison to photocatalytic degradation were investigated. To the best of our knowledge, this is the first systematic study to demonstrate the reactive oxygen species (ROS), electron (e^-) and hole (h⁺) generation ability of dyes to initiate self-degradation in the presence of direct solar energy (a free source of UV radiation) and UV light (254 and 365 nm). Various experimental conditions, e.g., different dye concentrations, pH, vessel-materials (borosilicate glass and quartz) were optimized to achieve the optimum degradation outcomes. The degradation kinetics of dyes suggested the applicability of second-order-kinetics to all kinds of applied light sources. Investigation of the thermodynamic approach reveals that the self-degradation procedure was endothermic, with activation energies of 46.89 and 52.96 kJ mol^-1, respectively, for MG and CV. The self-degradation mechanism was further corroborated by the quantum calculations, while the formation of final degraded products for dye-degradations was established on the basis of mass spectroscopy and total organic carbon (TOC) analysis. The computed emission energies for MG and CV advocate that the excitation energy occurs due to the sole-attribution electron excitation from the Highest Occupied Molecular Orbital (HOMO) to the Lowest Unoccupied Molecular Orbital (LUMO). The close energy difference between the hydroxyl anions and the dyes also facilitates the creation of the hydroxyl radical. In a similar manner, the excited electrons from the aforementioned dyes may readily be transferred to triplet molecular oxygen, which makes it possible to generate super oxide. The radical generated in the process facilitates the self-degradation of the dyes.

Gallic acid influence on azo dyes oxidation by Fenton processes

The present work consisted in evaluating the effect of a natural plant reducer, gallic acid (GA), on the discolouration/oxidation of two azo dyes by Fenton processes (Fe³⁺/H₂O₂ and Fe²⁺/H₂O₂). A kinetic study was performed to better interpret the discolouration data at different temperatures. The 1st-order kinetic model presented the best fit for the experimental data of methyl orange discolouration, while the 2nd-order was better for chromotrope 2R. Due to the addition of GA and the temperature rise, there were increases in discolouration and in the reaction rate constant values. As a highlight, it was possible to verify the reduction of the apparent activation energy (Ea) due to the presence of GA. For example, Ea for discolouring methyl orange corresponded to 81.5 and 53.6 kJ.mol^-1 by Fe²⁺/H₂O₂ and Fe²⁺/H₂O₂/GA, respectively. Thus, it can be inferred that the GA reduces the energy barrier to increase the oxidation of dyes by Fenton processes.

Impact of various factors on the kinetics of non-enzymatic fragmentation of a monoclonal antibody

Non-enzymatic hinge fragmentation of monoclonal antibodies (mAb) is considered a critical quality attribute since it changes the primary sequence of the proteins, thereby leading to structural changes which can affect stability, function, and efficacy. While peptide bonds are exceptionally stable under physiological conditions, reactive side chains of a few residues, the flexibility of the backbone, and physicochemical parameters such as pH, temperature, and the reaction of radicals and metal ions can promote the cleavage of peptide bonds. In this study, the relative extent and rate of fragmentation are compared with respect to the presence of several different factors (including hydrogen peroxide, metal ion, and temperature) as measured by size exclusion chromatography. A kinetic model of monomer degradation as a function of time (mAb only) is created. In the presence of either H₂O₂ or Cu²⁺, or both, the reaction kinetics follow different orders depending on the reaction conditions. The half-life for peptide bond cleavage of the mAb hinge region was 385 days at 40 °C and decreases to 250, 48, and 45 days in the presence of H₂O₂, Cu²⁺, and a combination of H₂O₂ and Cu²⁺, respectively. A temperature dependence of peptide bond cleavage at 35 °C, 40 °C, 45 °C, and 50 °C showed Arrhenius behavior with an apparent activation energy of 76.9±16.4 kJ/mol. The reaction rates obtained from the Arrhenius equation were then extrapolated to predict fragmentation rates under real storage conditions (e.g., at 2-8 °C). We demonstrate that trace levels of impurities including peroxide left after surface sterilization or degradation of non-ionic surfactants or metal ions from the buffer components can significantly affect the stability of a mAb.

Neomycin removal using the white rot fungus Trametes versicolor

The presence of antibiotic resistance genes in wastewater treatment plants (WWTPs), and in river and lake recipients show the need to develop new antibiotic removal strategies. The aminoglycoside antibiotic class is of special concern since the chemical structure of these compounds limits the choices of removal technologies. The experimental design included fungal mediated in vivo and in vitro experiments. The experiments were performed in Erlenmeyer flasks under non-sterile conditions. In the study, the role of the laccase redox mediator 4-hydroxy benzoic acid (HBA) in the removal of neomycin was investigated. The specific objective of the study was to conclude whether it is possible to use the white rot fungus (WRF) Trametes versicolor to biodegrade neomycin. It was shown that it is feasible to remove 34% neomycin in vitro (excluding living fungal cells) by laccase-HBA mediated extracellular biodegradation. In the in vivo experiments, polyurethane foam (PUF) was used as supporting material to immobilize fungal mycelia on. The presence of living fungal cells facilitated a removal of approximately 80% neomycin in the absence of HBA. Using liquid chromatography-high resolution-mass spectrometry, it was possible to tentatively identify oxidation products of neomycin hydrolysates. The results in this study open up the possibility to implement a pretreatment plant (PTP) aimed for neomycin removal.

Heterogeneous Photodegradation for the Abatement of Recalcitrant COD in Synthetic Tanning Wastewater

Tannery wastewater is considered one of the most contaminated and problematic wastes since it consists of considerable amounts of organic and inorganic compounds. These contaminants result in high chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total suspended solids (TSS). In this work, the heterogeneous photodegradation of recalcitrant COD in wastewater from the tanning industry was investigated, in particular the recalcitrant COD due to the presence of vegetable tannins extracted from mimosa and chestnut and from synthetic tannins based on 4,4′ dihydroxy phenyl sulfone. TiO2 Aeroxide P-25 was employed to study the photodegradation of model molecules in batch conditions under different parameters, namely initial concentration of COD, temperature, and catalyst dose. The maximum COD abatement reached was 60%. Additionally, preliminary kinetic investigation was conducted to derive the main kinetic parameters that can be useful for process scale-up. It was found to be independent of the temperature value but linearly dependent on both catalyst loading and the initial COD value.

Effect of cysteine using Fenton processes on decolorizing different dyes: a kinetic study

Amino acid cysteine has been used as reducing mediator with the aim of improving dye degradation by homogeneous Fenton processes (Fe²⁺/H₂O₂ and Fe³⁺/H₂O₂). Through its known Fe³⁺-reducing activity, this amino acid can enhance the production of reactive oxygen species as HO^• (hydroxyl radical) and its pro-oxidant properties have been verified while decolorizing diverse dyes in the present work. Its presence enhanced decolorization of Methyl Orange, Phenol Red, Safranin T, Rhodamine B, Reactive Black 5 and Reactive Yellow 2, mainly in reactions initially containing Fe³⁺ as a catalyst (Fe³⁺-reactions). E.g. Fe³⁺/H₂O₂ and Fe³⁺/H₂O₂/cysteine systems decolorized 27% and 44% of Phenol Red after 60 min, respectively. A kinetic modeling analysis has revealed that 1st-order and mainly 2nd-order kinetic models were well fitted to both Fe²⁺- and Fe³⁺-reactions data. Improvements in reaction rate constants have been observed by adding cysteine. In experiments performed at varied temperatures, it was found a decrease in activation energy (Ea) due to cysteine addition while decolorizing Safranin T: Ea decreased from 104.6 to 88.9 kJ mol^-1 for Fe³⁺-reactions and from 81.0 to 52.2 kJ mol^-1 for Fe²⁺-reactions. Therefore, it was found that cysteine decreases the energy barrier so as to improve Fenton-based decolorization reactions.

Degradation of the residual textile mixture cetyltrimethylammonium bromide/remazol yellow gold RNL-150%/reactive blue BF-5G: evaluation photo-peroxidation and photo-Fenton processes in LED and UV-C photoreactors

This article presents a study on the degradation of a residual textile mixture composed of cationic surfactant cetyltrimethylammonium bromide (CTAB) and the remazol yellow gold RNL-150% and reactive blue BF-5G textile dyes. This was carried out by employing the photo-peroxidation and photo-Fenton processes in LED and UV-C photoreactors. The photo-Fenton process was the most efficient as regards the degradation of the CTAB and dye mixture, for both types of radiation. In the kinetic study, degradations of 99% were obtained in 180 min for the chromophore groups using both types of radiation. The degradation of the CTAB and aromatic groups was, meanwhile, an average of 25% when employing LED radiation. The behavior of the degradation reaction was pseudo-first-order. Toxicity tests indicated that the solutions were better able to grow seeds and bacteria after treatment with the photo-Fenton process, using both types of radiation. The photo-Fenton processes carried out by employing LED and UV-C photoreactors were able to degrade the CTAB and dye mixture, thus highlighting the efficiency of LED radiation when its power (three times smaller) is compared to that of UV-C radiation. This process, therefore, represents an alternative for use in textile wastewater treatment systems.

Kinetic Study of the Ultrasound Effect on Acid Brown 83 Dye Degradation by Hydrogen Peroxide Oxidation Processes

The effect of ultrasound on the degradation of the dye Acid Brown 83 by seven different degradation methods (blank test using only ultrasound, hydrogen peroxide in a neutral medium, hydrogen peroxide in a sulfuric acid medium and hydrogen peroxide in a sulfuric acid medium in the presence of Fe(II), both without and with ultrasonic irradiation) is studied in this paper. The effectiveness of these methods is compared by analyzing the degradation percentages of the dye and its initial degradation rate. The application of ultrasound leads to a significant increase in the efficiency of any of the degradation method studied. Kinetic study of Acid Brown 83 degradation by the above-mentioned methods is carried out by using four kinetic models (first order, second order, Behnajady and pseudo-first order). The pseudo-first order model is the one that best fits the experimental data in all the used degradation methods. Although when the degradation is performed in the presence of Fe(II), the Behnajady model presents correlation coefficients slightly higher than those of the pseudo-first order, the maximum experimental conversions obtained fit much better in all cases to the pseudo first order model.

Mechanism-Based Insights into Removing the Mutagenicity of Aromatic Amines by Small Structural Alterations

Aromatic and heteroaromatic amines (ArNH₂) are activated by cytochrome P450 monooxygenases, primarily CYP1A2, into reactive N-arylhydroxylamines that can lead to covalent adducts with DNA nucleobases. Hereby, we give hands-on mechanism-based guidelines to design mutagenicity-free ArNH₂. The mechanism of N-hydroxylation of ArNH₂ by CYP1A2 is investigated by density functional theory (DFT) calculations. Two putative pathways are considered, the radicaloid route that goes via the classical ferryl-oxo oxidant and an alternative anionic pathway through Fenton-like oxidation by ferriheme-bound H₂O₂. Results suggest that bioactivation of ArNH₂ follows the anionic pathway. We demonstrate that H-bonding and/or geometric fit of ArNH₂ to CYP1A2 as well as feasibility of both proton abstraction by the ferriheme-peroxo base and heterolytic cleavage of arylhydroxylamines render molecules mutagenic. Mutagenicity of ArNH₂ can be removed by structural alterations that disrupt geometric and/or electrostatic fit to CYP1A2, decrease the acidity of the NH₂ group, destabilize arylnitrenium ions, or disrupt their pre-covalent transition states with guanine.

Effect of Physiological Concentrations of Vitamin C on the Inhibitation of Hydroxyl Radical Induced Light Emission from Fe2+-EGTA-H2O2 and Fe3+-EGTA-H2O2 Systems In Vitro

Ascorbic acid (AA) has antioxidant properties. However, in the presence of Fe²⁺/Fe³⁺ ions and H₂O₂, it may behave as a pro-oxidant by accelerating and enhancing the formation of hydroxyl radicals (^•OH). Therefore, in this study we evaluated the effect of AA at concentrations of 1 to 200 µmol/L on ^•OH-induced light emission (at a pH of 7.4 and temperature of 37 °C) from 92.6 µmol/L Fe²⁺—185.2 µmol/L EGTA (ethylene glycol-bis (β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid)—2.6 mmol/L H₂O₂, and 92.6 µmol/L Fe³⁺—185.2 µmol/L EGTA—2.6 mmol/L H₂O₂ systems. Dehydroascorbic acid (DHAA) at the same range of concentrations served as the reference compound. Light emission was measured with multitube luminometer (AutoLumat Plus LB 953) for 120 s after automatic injection of H₂O₂. AA at concentrations of 1 to 50 µmol/L and of 1 to 75 µmol/L completely inhibited light emission from Fe²⁺-EGTA-H₂O₂ and Fe³⁺-EGTA-H₂O₂, respectively. Concentrations of 100 and 200 µmol/L did not affect chemiluminescence of Fe³⁺-EGTA-H₂O₂ but tended to increase light emission from Fe²⁺-EGTA-H₂O₂. DHAA at concentrations of 1 to 100 µmol/L had no effect on chemiluminescence of both systems. These results indicate that AA at physiological concentrations exhibits strong antioxidant activity in the presence of chelated iron and H₂O₂.

Evolution of Surface Catalytic Sites on Bimetal Silica-Based Fenton-Like Catalysts for Degradation of Dyes with Different Molecular Charges

We present here important new findings on the direct synthesis of bimetal Cu-Mn containing porous silica catalyst and the effects of structure-directing agent removal from the prepared nanomaterial on the evolution of surface catalytic sites. The extraction-calcination procedure of the structure-directing agent removal led to the formation of Cu and Mn oxo-clusters and Cu and Mn oxide nanoparticles smaller than 5 nm, while the solely calcination procedure led to the mentioned species and in addition to the appearance of CuO nanoparticles 20 nm in size. Catalysts were tested in the Fenton-like catalytic degradation of dyes with different molecular charge (cationic, anionic, and zwitterionic) as model organic pollutants in wastewater at neutral pH. Significantly faster degradation of cationic and anionic dyes in the first 60 min was observed with the catalyst containing larger CuO nanoparticles (>20 nm) due to the less hindered generation of ^•OH radicals and slower obstructing of the active sites on the catalysts surface by intermediates. However, this was not found beneficial for zwitterionic dye with no adsorption on the catalysts surface, where the catalyst with smaller Cu species performed better.

Experimental data of a catalytic decolorization of Ponceau 4R dye using the cobalt (II)/NaHCO3/H2O2 system in aqueous solution

The treatment by Advanced Oxidation Processes (AOPs) of wastewater polluted with dyes is of particular interest in the field of environmental engineering, especially for the removal azo-dyes, representing over 50% of the global annual production of dyes. Unfortunately, most azo-dyes are non-biodegradable and can be toxic to aquatic organisms. This is the first data article that applies the methodology of response surface for the optimization of decolorization of an azo-compound using cobalt in a homogeneous medium as the catalyst of a bicarbonate activated hydrogen peroxide (BAP) system which, in turn, is an emerging technology for wastewater treatment. The Response Surface Methodology (RSM) based on a Central Composite Design (CCD) was used to evaluate and optimize the influence of three experimental variables (stoichiometric dosage of H₂O₂, molar ratio H₂O₂/NaHCO₃ and cobalt concentration) on the decolorization of Ponceau 4R. Reactions were performed at 25 °C, pH 8.3 with a reaction time of 2 h. Analysis of variance (ANOVA) showed values of R² and adjusted-R² of 0.9815 and 0.9648, and experimental data were fit to a second-order regression model. The optimal conditions to achieve a maximum decolorization (96.31%) of a Ponceau 4R aqueous solution of 20 mg/l were: 4.73 times stoichiometric dosage of H₂O₂, molar ratio H₂O₂/NaHCO₃ of 1.70 and cobalt concentration of 11.16 µM. Under the optimal reaction conditions, the influence of temperature (20, 25, 30 and 35 °C) on decolorization was evaluated and data were adjusted to second order kinetics. To verify the efficiency of the BAP system on the decolorization of Ponceau 4R, under the optimal conditions of reaction, UV–Vis spectra, at different reaction times, were measured. Additionally, blank experiments in order to evaluate the effect of individual factors in the Ponceau 4R decolorization, using BAP system, were carried out. Data showed that the Co(II)-NaHCO₃-H₂O₂ system is a suitable technology for the decolorization of azo-dyes aqueous solutions.

Decreasing COD in Sugarcane Vinasse Using the Fenton Reaction: The Effect of Processing Parameters

An experiment on Fenton degradation of sugarcane vinasse was carried out to determine its effect on the wastewater characteristics. Vinasse, a by-product of distillation in the bioethanol industry, contains high organic matter, as the value of chemical oxygen demand (COD) is >100,000 mg/L and BOD5 is 31,250 mg/L. The Fenton reaction is one of the advanced oxidation process (AOP) methods which has been widely applied for the treatment of wastewater containing organic pollutants and contaminants. This method utilizes hydroxyl radical (•OH) produced from the catalyzing reaction between Fe2+ or Fe3+ and hydrogen peroxide. The effect of pH, the ratio of [H2O2] and [COD], and the ratio of [H2O2] to [Fe3+] were studied in this research to evaluate the Fenton reaction. Results from this experiment showed that treatment of vinasse using the Fenton reaction decreased the COD value to 48.10%, and its biodegradability enhanced almost two times at a pH value of 3.8, a ratio of [H2O2] to [COD] of 0.62, and a ratio of [H2O2] to [Fe3+] of 50 (g/g), which demonstrated that the Fenton treatment was effective to reduce organic matter of sugarcane vinasse. Three kinetic models (first order, second order, and Behnajad–Modirshahla–Ghanbery (BMG) kinetic model) were used to evaluate the degradation of the COD value. On the basis of the value of R2 (coefficient of determination), we suggested that BMG represented the best kinetic model. This study finds that the Fenton treatment is able to mitigate the environmental impacts of sugarcane vinasse.