Adsorption Media for the Removal of Soluble Phosphorus from Subsurface Drainage Water

Lanthanum-loaded geopolymer for phosphate removal from agricultural runoff

The removal of phosphate from agricultural runoff is of great importance to mitigate an overabundance of nutrients discharging into receiving water bodies, which are susceptible to eutrophication. In this study, a La-loaded geopolymer was produced by adding metakaolin within an alkaline medium, consisting of sodium silicate (Na2SiO3) and sodium hydroxide (NaOH). The ratio of Na2SiO3:NaOH within the geopolymer slurry was manipulated to evaluate its effect on phosphate adsorption capacity. The 1.54 ratio yielded the highest adsorption capacity of 33.65 mg g-1. However, due to structural strength, safety, and economic considerations, the 2.0 ratio was used for the isotherm and kinetic adsorption testing. The La-loaded geopolymer exhibited higher phosphate removal in batch adsorption experiments at an acidic level (pH 4) and elevated temperature (40 °C). Moreover, ionic strength (3.5-20 mM) had a negligible impact on phosphate removal, indicating inner-sphere complexation as the main mechanism of adsorption. Additionally, bicarbonate and humic acid increased phosphate removal, whereas sulfate slightly decreased adsorption capacity. The La-loaded geopolymer was further evaluated using a synthetic agricultural solution, which yielded a Type III adsorption isotherm, demonstrating unrestricted multilayer phosphate adsorption. Results from this study verified the La-loaded geopolymer is a promising adsorbent for phosphate removal from agricultural runoff and underlined the importance of matrix effects on treatment performance.

Evaluation of a Volume-Averaged Species Transport Model with Micro-Macro Coupling for Breakthrough Curve Prediction

In porous water filters, the transport and entrapment of contaminants can be modeled as a classic mass transport problem, which employs the conventional convection-dispersion equation to predict the transport of species existing in trace amounts. Using the volume-averaging method (VAM), the upscaling has revealed two possible macroscopic equations for predicting contaminant concentrations in the filters. The first equation is the classical convection-dispersion equation, which incorporates a total dispersion tensor. The second equation involves an additional transport coefficient, identified as the adsorption-induced vector. In this study, the aforementioned equations were solved in 1D for column tests using 3D unit cells. The simulated breakthrough curves (BTCs), using the proposed micro-macro-coupling-based VAM model, are compared with the direct numerical simulation (DNS) results based on BCC-type unit cells arranged one-after-another in a daisy chain manner, as well as with three previously reported experimental works, in which the functionalized zeolite and zero-valent iron fillings were used as an adsorbent to remove phosphorous and arsenic from water, respectively. The disagreement of VAM BTC predictions with DNS and experimental results reveals the need for an alternative closure formulation in VAM. Detailed investigations reveal time constraint violations in all the three cases, suggesting this as the main cause of VAM's failure.

Long-term phosphorus removal by Ca and Fe-rich drainage filter materials under variable flow and inlet concentrations

Phosphorus (P) losses from tile-drained agricultural fields may degrade surface water quality by accelerating eutrophication. Among the different edge-of-field technologies, compact filter systems using different filter materials have been identified as potentially effective solutions for removing P from drainage water before discharge downstream. This study investigated the long-term (>696 days) P removal efficiency of 5 different filter materials in a column setup, using artificial drainage water (pH 6). Filter materials included two iron-based granulates (calcinated diatomaceous earth (CDE), ferric hydroxide granules (CFH)), and three calcium-based granulates (seashells, limestone, calcinated silicate/calcium oxide (Filtralite-P)). Experiments were performed under variable flow rates (0.037 and 1.52 L h-1; hydraulic retention time of 26-43 min and 18-30 h) and inlet P concentrations (0.14 and 0.7 mg L-1). An overall analysis revealed that the Fe-based materials achieved higher P retention than Ca-based materials. In particular, CFH was capable of retaining 99 and 98 % of the high and low inlet P concentrations, respectively. Conversely, limestone retained only 25 % of the high P load. CDE performed moderately well, independently of the inlet P concentration. Filtralite-P and Seashells performed well at high inlet P concentration but relatively poorly at low P concentration. The sensitivity of filter material P removal efficiency to variations in P loading was generally lowest for CFH and highest for limestone.

Nanoparticles, an Emerging Control Method for Harmful Algal Blooms: Current Technologies, Challenges, and Perspectives

Harmful algal blooms (HABs) are a global concern because they harm aquatic ecosystems and pose a risk to human health. Various physical, chemical, and biological approaches have been explored to control HABs. However, these methods have limitations in terms of cost, environmental impact, and effectiveness, particularly for large water bodies. Recently, the use of nanoparticles has emerged as a promising strategy for controlling HABs. Briefly, nanoparticles can act as anti-algae agents via several mechanisms, including photocatalysis, flocculation, oxidation, adsorption, and nutrient recovery. Compared with traditional methods, nanoparticle-based approaches offer advantages in terms of environmental friendliness, effectiveness, and specificity. However, the challenges and risks associated with nanoparticles, such as their toxicity and ecological impact, must be considered. In this review, we summarize recent research progress concerning the use of nanoparticles to control HABs, compare the advantages and disadvantages of different types of nanoparticles, discuss the factors influencing their effectiveness and environmental impact, and suggest future directions for research and development in this field. Additionally, we explore the causes of algal blooms, their harmful effects, and various treatment methods, including restricting eutrophication, biological control, and disrupting living conditions. The potential of photocatalysis for generating reactive oxygen species and nutrient control methods using nanomaterials are also discussed in detail. Moreover, the application of flocculants/coagulants for algal removal is highlighted, along with the challenges and potential solutions associated with their use. This comprehensive overview aims to contribute to the development of efficient and sustainable strategies for controlling HAB control.

Analysis of reactive phosphorus treatment by filter materials at the edge of tile-drained agricultural catchments: A global view of the current status and challenges

Phosphorus losses from agriculture have long generated concern due to the ecological impact on surface waters. Here tile-drained agricultural catchments are a critical source for concentrating and transporting phosphorus bioavailable forms or dissolved reactive phosphorus (DRP). Hence, edge-of-field technologies have been introduced to reduce DRP loads. Filter systems have received special attention due to their targeted approach using a permeable filter material (FM) rich in DRP sorbents. This review explores the performance and applicability of FMs in the aforementioned context because of the growing number of studies. An overall analysis revealed that sorption is preferable to precipitation for DRP retention at the edge-of-field, and that FM pH and particle size affect sorption properties and subsequently DRP retention and lifetime. Thus, FMs with predominant amounts of iron and/or aluminium can be recommended. Such materials generally have an appreciable availability of DRP binding sites, strong bonds with DRP and short reaction times, as well as low desorption, which lead to good operation. On the other hand, FMs with predominant amounts of calcium and/or magnesium are restricted to catchments with favourable conditions unless they have optimal reactivity for DRP. The review also found that hydraulic retention time plays a key role in the performance and applicability of FMs, especially in those dependent on precipitation reactions. Therefore, it is crucial that FMs are designed, constructed and managed according to the catchment conditions-including normally varying flow rates and DRP concentrations-in order to ensure successful operation. This reflects in long-term, high and steady net DRP retention along with low costs, thus improving the FM cost-effectiveness, besides discharging non-harmful effluents to aquatic ecosystems.

Phosphorus removal and recovery: state of the science and challenges

Phosphorus is one of the main nutrients required for all life. Phosphorus as phosphate form plays an important role in different cellular processes. Entrance of phosphorus in the environment leads to serious ecological problems including water quality problems and soil pollution. Furthermore, it may cause eutrophication as well as harmful algae blooms (HABs) in aquatic environments. Several physical, chemical, and biological methods have been presented for phosphorus removal and recovery. In this review, there is an overview of phosphorus role in nature provided, available removal processes are discussed, and each of them is explained in detail. Chemical precipitation, ion exchange, membrane separation, and adsorption can be listed as the most used methods. Identifying advantages of these technologies will allow the performance of phosphorus removal systems to be updated, optimized, evaluate the treatment cost and benefits, and support select directions for further action. Two main applications of biochar and nanoscale materials are recommended.