Bioremediation of Total Petroleum Hydrocarbons (TPH) by Bioaugmentation and Biostimulation in Water with Floating Oil Spill Containment Booms as Bioreactor Basin

Bioadsorption of crude petroleum oil from seawater using the marine alga Hormophysa triquetra mediated silver nanoparticles

The biosynthesis of silver nanoparticles, both economically and environmentally advantageous, uses algae extracts. In the current work, we extracted the marine brown alga Hormophysa triquetra (C. Agardh) kützing and used it to make silver nanoparticles (HAgNPs) which are characterized via UV-visible spectrophotometers, Transmission Electron Microscopy (TEM), Zeta potential, and FTIR then used them in the bio adsorption of crude petroleum oil from seawater, comparing them with H. triquetra aqueous extract. UV scan of the phycosynthesized silver nanoparticles achieved the highest absorption at 369 nm. TEM showed that the synthesized HAgNPs occur with smooth, spherical, and semispherical forms with sizes ranging from 12.04 to 20.67 nm, zeta potential illustrated that HAgNPs were charged with -22.1, The H. triquetra aqueous extract's FTIR examination identified several active groups like - OH, -C=C-, NO, -CH, CCl, -C ≡ C-H: CH which are responsible for the bioadsorption of crude petroleum oil. When extracting crude petroleum oil from seawater, HAgNPs worked better than its aqueous extract. The maximum removal % for light n-alkanes (Ln-alk), heavy n-alkanes (Hn-alk), and PAHs were 70.4 %, 71.63 %, and 75.38 % respectively for H. triquetra aqueous extract with adsorption capacity 889, 511, 273 μg/g at salinity 36 % and pH 5, while in case of HAgNPs the results were 75.81 %, 77.15 %, and 80.56 %, respectively with adsorption capacity 957, 550, 292 μg/g at the same salinity and pH.

Occurrence of pharmaceuticals in rice (Oryza sativa L.) plant through wastewater irrigation

The present investigation focuses on the identification of popular PhACs in roots, leaves and rice grains, which are cultivated in soil irrigated with waters and wastewater. The present study reveals the presence of PhACs in rice grains from different brands which are available in the current market, which has thus motivated these experiments. The rice plants were cultivated in garden containers and irrigated with three different water sources. All PhAC compounds were recovered within an 89-111 % range using the extraction technique, reproducibility, and sensitivity (LOQ <25 µg/g). Further, PhAC compounds were identified using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QqTOF-MS). Interestingly, several PhAC compounds were detected in rice grains, aligning with hypotheses and findings from published literature. A total of ten (10) PhACs were found in the root, leaf, and rice grain of the 20 popular PhACs that were targeted. The annual exposure and medical dose equivalent for individual PhACs was negligible. According to our knowledge, this study is the first to show the accumulation of several categories (cocktail) of PhACs in rice grains and show the approximate human health risk assessment by its consumption. The study's results provide valuable insights for researchers, policymakers, and agricultural practitioners working on sustainable agriculture and public health.

Biogas from lignocellulosic feedstock: current status and challenges

The organic wastes and residues generated from agricultural, industrial, and domestic activities have the potential to be converted to bioenergy. One such energy is biogas, which has already been included in rural areas as an alternative cooking energy source and agricultural activities. It is produced via anaerobic digestion of a wide range of organic nutrient sources and is an essential renewable energy source. The factors influencing biogas yield, i.e., the various substrate, their characteristics, pretreatment methods involved, different microbial types, sources, and inoculum properties, are analyzed. Furthermore, the optimization of these parameters, along with fermentation media optimization, such as optimum pH, temperature, and anaerobic digestion strategies, is discussed. Novel approaches of bioaugmentation, co-digestion, phase separation, co-supplementation, nanotechnology, and biorefinery approach have also been explored for biogas production. Finally, the current challenges and prospects of the process are discussed in the review.

Microbial response to a port fuel spill: Community dynamics and potential for bioremediation

Following a fuel leakage inside a Portuguese maritime port, we conducted parallel 30-day experiments using contaminated seawater and fuel, sampled five days after the incident. This study aimed to (i)survey the native microbial community response to the spilled fuel and (ii)evaluate the efficacy of bioremediation, both biostimulation and bioaugmentation with a lyophilized bacterial consortium (Rhodococcus erythropolis, Pseudomonas sp.), in accelerating hydrocarbon degradation. Metabarcoding analysis revealed a shift in microbial communities, with increased abundance of hydrocarbon-degraders (e.g. Alcanivorax, Thalassospira). Ninety-five hydrocarbonoclastic bacteria were isolated, including key groups from the enriched communities. The lyophilized bacteria added in bioaugmentation, enhanced the abundance of hydrocarbon-degraders over time and were recovered throughout time. Bioremediation treatments favoured biodegradation, achieving over 60 % removal of total petroleum hydrocarbons after 15 days, contrasting with natural attenuation where almost no TPH was removed. This work highlights the potential of bioremediation technologies to accelerate hydrocarbon-degrading activity, for oil spills inside ports.

Exploring zeolite-based composites in adsorption and photocatalysis for toxic wastewater treatment: Preparation, mechanisms, and future perspectives

Water scarcity has become a critical global concern exacerbated by population growth, globalization, and industrial expansion, resulting in the production of wastewater containing a wide array of contaminants. Tackling this challenge necessitates the adoption of innovative materials and technologies for effective wastewater treatment. This review article provides a comprehensive exploration of the preparation, applications, mechanisms, and economic environmental analysis of zeolite-based composites in wastewater treatment. Zeolite, renowned for its versatility and porous nature, is of paramount importance due to its exceptional properties, including high surface area, ion exchange capability, and adsorption capacity. Various synthetic methods for zeolite-based composites are discussed. The utilization of zeolites in wastewater treatment, particularly in adsorption and photocatalysis, is thoroughly investigated. The significance of zeolite in adsorption and its role in the photocatalytic degradation of pollutants are examined, along with its applications in treating volatile organic compounds (VOCs), dye wastewater, oil-field wastewater, and radioactive waste. Mechanisms underlying zeolite-based adsorption and photocatalysis, including physical and chemical adsorption, ion exchange, and surface modification, are elucidated. Additionally, the role of micropores in the adsorption process is explored. Furthermore, the review delves into regeneration and desorption studies of zeolite-based composites, crucial for sustainable wastewater treatment practices. Economic and environmental analyses are conducted to assess the feasibility and sustainability of employing zeolite-based composites in wastewater treatment applications. Future recommendations are provided to guide further research and development in the field of zeolite-based composites, aiming to enhance wastewater treatment efficiency and environmental sustainability. By exploring the latest advancements and insights into zeolite-based nanocomposites, this paper aims to contribute to the development of more efficient and sustainable wastewater treatment strategies. The integration of zeolite-based materials in wastewater treatment processes shows promise for mitigating water pollution and addressing water scarcity challenges, ultimately contributing to environmental preservation and public health protection.

Biosurfactants production by marine yeasts isolated from zoanthids and characterization of an emulsifier produced by Yarrowia lipolytica LMS 24B

The present study investigates the potential for biosurfactant production of 19 marine yeast species obtained from zoanthids. Using the emulsification index test to screen the samples produced by the marine yeasts, we verified that five isolates exhibited an emulsification index ≥50%. Additional tests were performed on such isolates, including oil displacement, drop collapse, Parafilm M assay, and surface tension measurement. The tolerance of produced biosurfactants for environmental conditions was also analyzed, especially considering the media's temperature, pH, and salinity. Moreover, the surfactant's ability to emulsify different hydrocarbon sources and to metabolize kerosene as the sole carbon source was evaluated in vitro. Our results demonstrate that yeast biosurfactants can emulsify hydrocarbon sources under different physicochemical conditions and metabolize kerosene as a carbon source. Considering the Yarrowia lipolytica LMS 24B as the yeast model for biosurfactant production from the cell's wall biomass, emulsification indexes of 61.2% were obtained, even at a high temperature of 120 °C. Furthermore, the Fourier-transform middle infrared spectroscopy (FTIR) analysis of the biosurfactant's chemical composition revealed the presence of distinct functional groups assigned to a glycoprotein complex. Considering the status of developing new bioproducts and bioprocesses nowadays, our findings bring a new perspective to biosurfactant production by marine yeasts, especially Y. lipolytica LMS 24B. In particular, the presented results validate the relevance of marine environments as valuable sources of genetic resources, i.e., yeast strains capable of metabolizing and emulsifying petroleum derivatives.

Ecological indicators and biological resources for hydrocarbon rhizoremediation in a protected area

Spillage from oil refineries, pipelines, and service stations consistently leads to soil, food and groundwater contamination. Bacterial-assisted phytoremediation is a non-invasive and sustainable solution to eliminate or decrease the concentration of xenobiotic contaminants in the environment. In the present study, a protected area interested by a fuel discharge was considered to assess a bioremediation intervention. From the spill point, a plume of contamination flowed South-West into the aquifer, eventually reaching a wetland area. Soils, groundwaters and plants belonging to the species Scirpus sylvaticus (L.) were sampled. In the majority of the soil samples, concentrations of total petroleum hydrocarbons, both C ≤ 12 and C > 12, exceeded legal limits set forth in Directive 2000/60/EC. The analysis of diatom populations, used as ecological indicators, evidenced morphology alterations and the presence of Ulnaria ulna and Ulnaria biceps species, previously detected in hydrocarbon-polluted waters. Tests for phytotoxicity and phytodegradation, carried out in soil mesocosms, planted with Zea mays and Helianthus annuus, demonstrated that both species significantly contributed to the removal of total petroleum hydrocarbons. Removal of C ≤ 12 and C > 12 petroleum hydrocarbons was in the range of 80%-82% for Z. mays and 71%-72% for H. annuus. Microbial communities inhabiting high organic carbon and vegetated soils were more active in hydrocarbon degradation than those inhabiting subsoils, as evidenced by soil slurry experiments. The abundance of functional genes encoding toluene-benzene monooxygenase (tbmD) and alkane hydroxylase (alkB), quantified in environmental samples, confirmed that the plant rhizosphere recruited a microbial community with higher biodegradation capacity. Bacterial strains isolated from the sampling site were able to grow on model hydrocarbons (hexane, hexadecane and o-, m-, p-xylene) as sole carbon and energy sources, indicating that a natural bio-attenuation process was on-going at the site. The bacterial strains isolated from rhizosphere soil, rhizoplane and endosphere showed plant growth promoting traits according to in vitro and in vivo tests on Z. mays and Oryza sativa, allowing to forecast a possible application of bacterial assisted rhizoremediation to recover the protected area.

Bioaugmentation: an approach to biological treatment of pollutants

Industrial development and the associated generation of waste requires attention for their management, treatment, and reduction without further degrading the quality of life. Microbes and plant-based bioremediation approaches are some of the sustainable strategies for the biodegradation of harmful pollutants instead of chemical-based treatment. Bioaugmentation is one such approach where microbial strains with the ability to degrade the targeted pollutant are introduced in a polluted environment. Harnessing of microbes from various locations, especially from the site of contamination (indigenous microbes), followed by optimization of the strains, inoculum size, media, and genetic engineering of the microbes along with a combination of strategies such as bio stimulation, phytoremediation is being applied to increase the efficiency of bioaugmentation. Further, bioaugmentation is influenced by various factors such as temperature, the composition of the pollutant, and microbial inoculum which needs to be considered for maximum efficiency of the treatment process. It has numerous advantages such as low cost, sustainability, and easy handling of the contaminants however, the major limitation of bioaugmentation is to increase the survival rate of the microbes involved in remediation for a longer duration in such a highly toxic environment. The review discusses these various aspects of bioaugmentation in brief for its large-scale implementation to address the global issue of pollution and environment management.

Integrating phytoremediation and mycoremediation with biosurfactant-producing fungi for hydrocarbon removal and the potential production of secondary resources

Treatment of petroleum-contaminated soil to a less toxic medium via physical and chemical treatment is too costly and requires posttreatment. This review focuses on the employment of phytoremediation and mycoremediation technologies in cleaning hydrocarbon-contaminated soil which is currently rare. It is considered environmentally beneficial and possibly cost-effective as it implements the synergistic interaction between plants and biosurfactant producing mycorrhiza to degrade hydrocarbon contaminants. This review also covers possible sources of hydrocarbon pollution in water and soil, toxicity effects, and current technologies for hydrocarbon removal and degradation. In addition to these problems, this review also discusses the challenges and opportunities of transforming the resultant treated sludge and treating plants into potential by-products for a higher quality of life for future generations.

Application of novel nanobubble-contained electrolyzed catalytic water to cleanup petroleum-hydrocarbon contaminated soils and groundwater: A pilot-scale and performance evaluation study

Soil and groundwater contamination caused by petroleum hydrocarbons is a severe environmental problem. In this study, a novel electrolyzed catalytic system (ECS) was developed to produce nanobubble-contained electrolyzed catalytic (NEC) water for the remediation of petroleum-hydrocarbon-contaminated soils and groundwater. The developed ECS applied high voltage (220 V) with direct current, and titanium electrodes coated with iridium dioxide were used in the system. The developed ECS prototype contained 21 electrode pairs (with a current density of 20 mA/cm2), which were connected in series to significantly enhance the hydroxyl radical production rate. Iron-copper hybrid oxide catalysts were laid between each electrode pair to improve the radical generation efficiency. The electron paramagnetic resonance (EPR) and Rhodamine B (RhB) methods were applied for the generated radical species and concentration determination. During the operation of the ECS, high concentrations of nanobubbles (nanobubble density = 3.7 × 109 particles/mL) were produced due to the occurrence of the cavitation mechanism. Because of the negative zeta potential and nano-scale characteristics of nanobubbles (mean diameter = 28 nm), the repelling force would prevent the occurrence of bubble aggregations and extend their lifetime in NEC water. The radicals produced after the bursting of the nanobubbles would be beneficial for the increase of the radical concentration and subsequent petroleum hydrocarbon oxidation. The highly oxidized NEC water (oxidation-reduction potential = 887 mV) could be produced with a radical concentration of 9.5 × 10-9 M. In the pilot-scale study, the prototype system was applied to clean up petroleum-hydrocarbon polluted soils at a diesel-oil spill site via an on-site slurry-phase soil washing process. The total petroleum hydrocarbon (TPH)-contaminated soils were excavated and treated with the NEC water in a slurry-phase reactor. Results show that up to 74.4% of TPH (initial concentration = 2846 mg/kg) could be removed from soils after four rounds of NEC water treatment (soil and NEC water ratio for each batch = 10 kg: 40 L and reaction time = 10 min). Within the petroleum-hydrocarbon plume, one remediation well (RW) and two monitor wells (located 1 m and 3 m downgradient of the RW) were installed along the groundwater flow direction. The produced NEC water was injected into the RW and the TPH concentrations in groundwater (initial concentrations = 12.3-15.2 mg/L) were assessed in these three wells. Compared to the control well, TPH concentrations in RW and MW1 dropped to below 0.4 and 2.1 mg/L after 6 m3 of NEC water injection in RW, respectively. Results from the pilot-scale study indicate that the NEC water could effectively remediate TPH-contaminated soils and groundwater without secondary pollution production. The main treatment mechanisms included (1) in situ chemical oxidation via produced radicals, (2) desorption of petroleum hydrocarbons from soil particles due to the dispersion of nanobubbles into soil pores, and (3) enhanced TPH oxidation due to produced radicals and energy after nanobubble bursting.

Aluminum soap nanoparticles-lignin powder form phase-selective gelator as an efficient sorbent for oils/water separation

Rapid and efficient recovery of oil spill is the key link for oil spill remediation, and also a great challenge. Here, the organogelator-polymerized porous matrix composed of adsorbents and organogelators can provide a new strategy for solving this problem. The gelling mechanism of aluminum 12-hydroxystearate (Al HSA) to form spherical nano micelles in solvents was investigated via UV-vis, FT-IR, and XRD. A creative method for aluminum soap-lignin gelator (OTS-AL/Al HSA) syntheses was put forward through the saponification of 12-hydroxystearic acid (HSA) and lignin via epichlorohydrin (ECH) crosslinking. By adjusting the ECH content, the growth of Al HSA nanoparticles (15-40 nm) on lignin can be realized, and the accordingly increased roughness endowed gelator with better hydrophobicity (WCA of 134.6°) before octadecyltrichlorosilane (OTS) modification. Thanks to the porous structures, the gelator powder exhibited a high sorption capacity in the range of 3.5-5.2 g g-1 for oils and organic solvents. Rheological studies demonstrated high mechanical strength of gels (>1.6 × 105 pa) and the gelator still retained 70% sorption capacity after 6 gelation-distillation cycles. The gelation characteristics of OTS-AL/Al HSA were attributed to the rapid sorption of oils by lignin and the self-assembly of Al HSA nano micelles on lignin to form an aggregated network structure trapping oils, thus realizing the synergistic effect of oil sorption-gelation.

New roles for Bacillus thuringiensis in the removal of environmental pollutants

For a long time, the well-known Gram-positive bacterium Bacillus thuringiensis (Bt) has been extensively studied and developed as a biological insecticide for Lepidoptera and Coleoptera pests due to its ability to secrete a large number of specific insecticidal proteins. In recent years, studies have found that Bt strains can also potentially biodegrade residual pollutants in the environment. Many researchers have isolated Bt strains from multiple sites polluted by exogenous compounds and characterized and identified their xenobiotic-degrading potential. Furthermore, its pathway for degradation was also investigated at molecular level, and a number of major genes/enzymes responsible for degradation have been explored. At present, a variety of xenobiotics involved in degradation in Bt have been reported, including inorganic pollutants (used in the field of heavy metal biosorption and recovery and precious metal recovery and regeneration), pesticides (chlorpyrifos, cypermethrin, 2,2-dichloropropionic acid, etc.), organic tin, petroleum and polycyclic aromatic hydrocarbons, reactive dyes (congo red, methyl orange, methyl blue, etc.), and ibuprofen, among others. In this paper, the biodegrading ability of Bt is reviewed according to the categories of related pollutants, so as to emphasize that Bt is a powerful agent for removing environmental pollutants.

Current trends in bioremediation and bio-integrated treatment of petroleum hydrocarbons

Petroleum hydrocarbons and their derivatives constitute the leading group of environmental pollutants worldwide. In the present global scenario, petroleum and natural gas production, exploration, petroleum refining, and other anthropogenic activities produce huge amounts of hazardous petroleum wastes that accumulate in the terrestrial and marine environment. Due to their carcinogenic, neurotoxic, and mutagenic characteristics, petroleum pollutants pose severe risks to human health and exert ecotoxicological effects on the ecosystems. To mitigate petroleum hydrocarbons (PHs) contamination, implementing "green technologies" for effective cleanup and restoration of an affected environment is considered as a pragmatic approach. This review provides a comprehensive outline of newly emerging bioremediation technologies, for instance; nanobioremediation, electrokinetic bioremediation, vermiremediation, multifunctional and sustainably implemented on-site applied biotechnologies such as; natural attenuation, biostimulation, bioaugmentation, bioventing, phytoremediation and multi-process hybrid technologies. Additionally, the scope of the effectiveness and limitations of individual technologies in treating the petroleum hydrocarbon polluted sites are also evaluated.

Decolorization potential of malachite green by Ralstonia mannitolilytica isolated from Indonesian cassava-based fermented food tapai

Pollution due to textile dye effluent mishandling is hazardous to ecosystems and to the living beings inhabiting them. This can cause retarded photosynthesis, disrupted fish day/night cycles, unbalanced bacterial populations, and decreased oxygen concentration in contaminated water, leading to low habitability. In this study, we aimed to isolate and characterize the microorganisms found in Indonesian cassava-based fermented food tapai starter cultures as a source of potential microbes for the biological remediation of textile dye pollutants. Microorganisms in the tapai starter culture were screened for their decolorization activity via spread-culture inoculation on a solid growth medium supplemented with textile dyes. Isolated microorganisms were selected based on their ability to secrete textile dye-decolorizing extracellular enzymes via increased light penetration after incubation of the cell-free supernatant (CFS) containing extracellular enzymes in textile dye solutions. Isolate JSP1 was the only bacterium capable of producing malachite green (MG)-decolorizing extracellular enzymes, which enabled it to survive and decolorize MG up to 375 ppm. Moreover, isolate JSP1 CFS was able to optimally decolorize 75% of MG at 100 ppm, but its activity was diminished at concentrations > 350 ppm. Colony and cellular morphology, biochemistry, and 16S rRNA tests revealed that the isolate was of Ralstonia mannitolilytica. Therefore, R. mannitolilytica isolate JSP1 may be a potential bioremediation agent for MG.

Reduction of hydrocarbon pollutants by hyacinth plants ( Eichhornia crassipes)

Background: The application of phytoremediation by utilizing plants has been used to control oil pollution in waters. One of the plants that can act as a phytoremediator is the hyacinth because this plant can reduce various pollutants including petroleum hydrocarbons. This study aims to study the reduction ability of petroleum hydrocarbons at different concentrations including improving water quality. Methods: This study consisted of one treatment (petroleum hydrocarbon) consisting of five factors with three replicates. The treatments consisted of 10 ppm (E1), 30 ppm (E2), 50 ppm (E3), 70 ppm (E4), 90 ppm (E5), and (E0) without aquatic plants as controls. The treatments were observed daily and measured from the first day (D-1), the seventh day (D-7), and the 14 th day (D-14). The water quality in each treatment was also measured, such as water temperature, pH, and dissolved oxygen. Results: The results showed that the hyacinth plant was able to reduce hydrocarbon in terms of total petroleum hydrocarbon (TPH) by 79% while it was only between 17-27% naturally without the hyacinth. The reduction of TPH in the water was in line with the decrease of chlorophyll in the leaves of hyacinths, and it was followed by the increase of dissolved oxygen in the water media. Conclusions: In conclusion, hyacinths can reduce petroleum hydrocarbons and they can improve the water quality as well.

Engineering biology in the face of uncertainty

Combining engineering and biology surely must be a route to delivering solutions to the world's most pressing problems in depleting resources, energy and the environment. Engineers and biologists have long recognized the power in coupling their disciplines and have evolved a healthy variety of approaches to realizing technologies. Yet recently, there has been a movement to narrow the remit of engineering biology. Its definition as 'the application of engineering principles to the design of biological systems' ought to encompass a broad church. However, the emphasis is firmly on construction '…of novel biological devices and systems from standardized artificial parts' within cells. Thus, engineering biology has become synonymous with synthetic biology, despite the many longstanding technologies that use natural microbial communities. The focus on the nuts and bolts of synthetic organisms may be deflecting attention from the significant challenge of delivering solutions at scale, which cuts across all engineering biology, synthetic and natural. Understanding, let alone controlling, every component of an engineered system is an unrealistic goal. To realize workable solutions in a timely manner we must develop systematic ways of engineering biology in the face of the uncertainties that are inherent in biological systems and that arise through lack of knowledge.

The application of biosurfactant-producing bacteria immobilized in PVA/SA/bentonite bio-composite for hydrocarbon-contaminated soil bioremediation

Oil spills that contaminate the environment can harm the surrounding ecosystem. The oil contains petroleum hydrocarbon which is toxic to the environment hence it needs to be removed. The use of bacteria as remediation media was modified by immobilizing into a matrix hence the bacteria can survive in harsh conditions. In this research, the ability of biosurfactant-producing bacteria (Pseudomonas aeruginosa, Bacillus subtilis, and Ralstonia pickettii) immobilized in the PVA/SA/bentonite matrix was tested in remediation on oil-contaminated soil. The immobilized beads filled with bacteria were added to the original soil sample, as well as washed soil. The beads were characterized by using FTIR and SEM. Based on FTIR analysis, the PVA/SA/bentonite@bacteria beads had similar functional groups compared to each other. SEM analysis showed that the beads had non-smooth structure, while the bacteria were spread outside and agglomerated. Furthermore, GC-MS analysis results showed that immobilized B. subtilis and R. pickettii completely degraded tetratriacontane and heneicosane, respectively. Meanwhile, after soil washing pre-treatment, immobilized bacteria could completely degrade octadecane (P. aeruginosa and R. pickettii) and tetratriacontane (P. aeruginosa and B. subtilis). Based on those results, immobilized bacteria could degrade oil compounds. The degradation result was influenced by the enzymes produced, the ability of the bacteria, the suitability of the test media, and the matrix used. Therefore, this study can be a reference for further soil remediation using eco-friendly methods.

Bioremediation of polycyclic aromatic hydrocarbons: An updated microbiological review

A class of organic priority pollutants known as PAHs is of critical public health and environmental concern due to its carcinogenic properties as well as its genotoxic, mutagenic, and cytotoxic properties. Research to eliminate PAHs from the environment has increased significantly due to awareness about their negative effects on the environment and human health. Various environmental factors, including nutrients, microorganisms present and their abundance, and the nature and chemical properties of the PAH affect the biodegradation of PAHs. A large spectrum of bacteria, fungi, and algae have ability to degrade PAHs with the biodegradation capacity of bacteria and fungi receiving the most attention. A considerable amount of research has been conducted in the last few decades on analyzing microbial communities for their genomic organization, enzymatic and biochemical properties capable of degrading PAH. While it is true that PAH degrading microorganisms offer potential for recovering damaged ecosystems in a cost-efficient way, new advances are needed to make these microbes more robust and successful at eliminating toxic chemicals. By optimizing some factors like adsorption, bioavailability and mass transfer of PAHs, microorganisms in their natural habitat could be greatly improved to biodegrade PAHs. This review aims to comprehensively discuss the latest findings and address the current wealth of knowledge in the microbial bioremediation of PAHs. Additionally, recent breakthroughs in PAH degradation are discussed in order to facilitate a broader understanding of the bioremediation of PAHs in the environment.

New insights into the bioremediation of petroleum contaminants: A systematic review

Petroleum product is an essential resource for energy, that has been exploited by wide range of industries and regular life. A carbonaceous contamination of marine and terrestrial environments caused by errant runoffs of consequential petroleum-derived contaminants. Additionally, petroleum hydrocarbons can have adverse effects on human health and global ecosystems and also have negative demographic consequences in petroleum industries. Key contaminants of petroleum products, primarily includes aliphatic hydrocarbons, benzene, toluene, ethylbenzene, and xylene (BTEX), polycyclic aromatic hydrocarbons (PAHs), resins, and asphaltenes. On environmental interaction, these pollutants result in ecotoxicity as well as human toxicity. Oxidative stress, mitochondrial damage, DNA mutations, and protein dysfunction are a few key causative mechanisms behind the toxic impacts. Henceforth, it becomes very evident to have certain remedial strategies which could help on eliminating these xenobiotics from the environment. This brings the efficacious application of bioremediation to remove or degrade pollutants from the ecosystems. In the recent scenario, extensive research and experimentation have been implemented towards bio-benign remediation of these petroleum-based pollutants, aiming to reduce the load of these toxic molecules in the environment. This review gives a detailed overview of petroleum pollutants, and their toxicity. Methods used for degrading them in the environment using microbes, periphytes, phyto-microbial interactions, genetically modified organisms, and nano-microbial remediation. All of these methods could have a significant impact on environmental management.

Tolerance, taxonomic and phylogenetic studies of some bacterial isolates involved in bioremediation of crude oil polluted soil in the southern region of Nigeria

Indigenous bacteria play vital roles in the bioremediation of crude oil polluted soils. The effectiveness of the bioremediation process depends on the tolerance, characteristics and biodiversity of the bacteria isolates. Bacteria strains were isolated from crude-oil polluted sites in different locations in the southern region of Nigeria namely: Azikoro and Otukpoti (Bayelsa state); Ologbo and Benin (Edo State) and non-polluted soil was collected from Ibadan (Oyo state). Tolerance study was conducted for 96 h s. Isolation and characterization of the most effective isolate from each location was done using cultural, physico-chemical and molecular methods. The tolerance level of the isolates from the different oil-polluted soils and their comparative growth performance on crude oil supplemented media decreases in the order: Azikoro - Ologbo - Otukpoti - Benin. MATS analysis showed that cell surfaces of Azikoro, Ologbo and Otukpoti strains exhibited 58-63 % adhesion to n-hexadecane and are hydrophobic strains while Benin strain possess 38% adhesion to n-hexadecane and are hydrophilic. The cell surfaces of isolates from Azikoro, Ologbo and Otukpoti are highly Lewis-acidic while that from Benin is highly Lewis-basic. Isolates from Benin-3, Ologbo-1, and Otukpoti-1 were shown to be gram positive while that from Azikoro was gram negative. 16S rDNA fingerprinting confirmed the identities of the isolates as follows: Paenalcaligenes suwonesis with accession numbers NR-133804.1 from Azikoro spillage site (93.77%); Lactobacillus nagelii with accession number NR-158108.1 (91.30%) from Benin spillage site; Lactobacillus fermentum with accession number NR-104927.1 (96.70%) from Ologbo and Otukpoti spillage sites. Phylogenetic analysis putatively categorized the isolates from Otukpoti and Ologbo in close association belonging to same homology while Benin isolate is a subgroup. The characteristics and biodiversity of all the isolated bacteria from the regions possibly justifies their involvement in the bioremediation of petroleum hydrocarbons.

Emerging bio-dispersant and bioremediation technologies as environmentally friendly management responses toward marine oil spill: A comprehensive review

Marine oil spills emanating from wells, pipelines, freighters, tankers, and storage facilities draw public attention and necessitate quick and environmentally friendly response measures. It is sometimes feasible to contain the oil with booms and collect it with skimmers or burn it, but this is impracticable in many circumstances, and all that can be done without causing further environmental damage is adopting natural attenuation, particularly through microbial biodegradation. Biodegradation can be aided by carefully supplying biologically accessible nitrogen and phosphorus to alleviate some of the microbial growth constraints at the shoreline. This review discussed the characteristics of oil spills, origin, ecotoxicology, health impact of marine oils spills, and responses, including the variety of remedies and responses to oil spills using biological techniques. The different bioremediation and bio-dispersant treatment technologies are then described, with a focus on the use of green surfactants and their advances, benefits/drawbacks. These technologies were thoroughly explained, with a timeline of research and recent studies. Finally, the hurdles that persist as a result of spills are explored, as well as the measures that must be taken and the potential for the development of existing treatment technologies, all of which must be linked to the application of integrated procedures.

Simulation on the Permeability Evaluation of a Hybrid Liner for the Prevention of Contaminant Diffusion in Soils Contaminated with Total Petroleum Hydrocarbon

This study describes the test results to evaluate the impermeability efficiency, according to the total petroleum hydrocarbon (TPH) reaction time of a hybrid liner for preventing the TPH diffusion, and the numerical analysis results, according to the various TPH reaction times of the hybrid liner. The experimental results indicated that the hybrid liner performed effectively as an impermeable material under the condition of a 4 h reaction time between TPH and the hybrid liner. In other words, the permeability of the hybrid liner was lower than 7.64 × 10^-7 cm/s when the reaction time of the TPH and the hybrid liner exceeded 4 h. This means that polynorbornene applied as a reactant becomes completely gelated four hours after it reacts with TPH, demonstrating its applicability as a liner. The numerical analysis results to evaluate the TPH diffusion, according to the hybrid liner-TPH reaction time indicated that the concentration decreased, compared to the initial concentration as the hybrid liner-TPH reaction time increased, regardless of the head-difference and the observation point for all concentration conditions. In addition, the reduction ratio of the concentration, compared to the initial concentration was 99% ~ 100%, when the reaction time of the hybrid liner-TPH was more than 4 h. It was found that the concentration diffusion of TPH reacting with the hybrid liner was decreased when the distance from the hybrid liner and the reaction time of the hybrid liner-TPH were increased. In other words, in the case of a high-TPH condition, the concentration reduction ratio is 12.5~17.8%, 16.9~29.7%, depending on the distance ratio (D/L = 0.06, 0.54, 0.94), respectively, when the reaction time of the hybrid liner-TPH is 0 h and 0.5 h, respectively. In the case of medium- and low-TPH conditions, the concentration reduction ratio, according to the distance ratio is 12.0% to 20.8% and 17.0% to 29.8%, respectively. This result means that a numerical analysis model can be used sufficiently to predict the TPH diffusion, according to the distance from the location where the hybrid liner is installed.

Composition, impacts, and removal of liquid petroleum waste through bioremediation as an alternative clean-up technology: A review

Exposure to hazardous wastes, especially petroleum wastes hydrocarbon (PWHCs), can damage human health and biological diversity. A huge amount of petroleum waste along with persistent organic pollutants is being generated during exploration and processing of crude oil. The dumping of petroleum waste hydrocarbons in an open pit contaminates the soil which can cause severe threats to human health and agro-geo-environmental ecosystem. The current study aimed to evaluate the mode of occurrence, composition, environmental, and health impacts of petroleum waste by using recent literature. The extracted results show that oil emulsion contains 48% oil, suspension 23%, settled emulsion 42%, and sludge emulsion 36%. The study discusses the possible biological techniques for rehabilitation of petroleum waste-contaminated areas. Several physical and chemical techniques are available for remediation of petroleum waste, but they are either costly or environmentally not feasible. Whereas, biological remediation namely, Bioremediation (Biostimulation and Bioaugmentation), Phytoremediation (Phytodegradation, Rhizoremediation, Phytovolatilization, and Rhizo-filtration) is a cheap and environmentally friendly way to remove petroleum waste hydrocarbons from contaminated soil and water. Some important enzymes (i.e., peroxidase, nitrilase, nitroreductase, phosphatase) and plant species i.e., Acacia and Chloris species are prominent methods to remediate the PWHCs. The knowledge assembled in this review is expected to create new doors for researchers to develop more efficient techniques to control the harmful impacts of PWHCs on the environment and health.

A critical review of oil spills in the Niger Delta aquatic environment: causes, impacts, and bioremediation assessment

The Niger Delta region in South-South Nigeria, on Africa's West Coast, is densely populated. The region, which contains a substantial stock of crude oil and natural gas, has been nicknamed "the engine room" for Nigeria's economic development and progress. It is responsible for up to 90% of the country's economic growth (or gross domestic product/GDP). The region has multiple ecosystems, such as the aquatic environment, that are critical to the survival of the area's various habitats and living species. However, the same region has witnessed unjustifiable environmental pollution arising from oil activities over the years of exploration and production which has orchestrated negative consequences on the Niger Delta ecosystem. This has led to extended negative consequences on natural resources, which also have detrimental repercussions psychologically, ecologically, socially, economically, and physically which, in turn, impacts the overall health of the affected individuals. This write-up provides an overview of the major drivers of the oil leakage in Nigeria's Niger Delta ecosystem as well as the major impacts on the environment. It will also analyze numerous means of remediation in use and extend such for a more inclusive and productive option. Moreover, this review offers key measures that may help to maintain long-term policies for reducing adverse implications and increasing the living standard for the Niger Delta area's affected communities.

Investigations on influences of MWCNT composite membranes in oil refineries waste water treatment with Taguchi route

Most of the 'oil refineries' severally pollutes the water resources by depleting their untreated waste water like cooling water, storm water and unsanitary sewage water. These wastewaters are to be treated with high care to protect the human, pebbles, plants, fish and other water animals and from harmful effects. The present study focused to treat the oil refinery wastewater by means of Multi wall carbon nanotube (MWCNT) coated Polyvinylidene Fluoride (PVDF) membrane. The main objectives are: to increases the life of filter, reduce the percolation flux and reduce the formation of antifouling in the filter by using MWCNT composite membrane in it. Different process parameters of the proposed water treatment process, like diameter of MWCNT (15 nm, 20 nm, 25 nm and 30 nm), operating pressure (3 bar, 4 bar, 5 bar and 6 bar), pH value (3, 5, 7 and 9) and temperature (25 °C, 30 °C, 35 °C and 40 °C) temperature. Taguchi statistical technique is employed for designing experiments and for optimizing the process parameters of wastewater treatment process of an oil refinery. The proposed filter for wastewater treatment exhibited appreciable performance in removal rate of Percolation flux, percentage of chemical oxygen demand removal and percentage of total carbolic rejection as 27.2 kg/m²h, 78.51% and 95.33% respectively.

A Review on Biotechnological Approaches Applied for Marine Hydrocarbon Spills Remediation

The increasing demand for petroleum products generates needs for innovative and reliable methods for cleaning up crude oil spills. Annually, several oil spills occur around the world, which brings numerous ecological and environmental disasters on the surface of deep seawaters like oceans. Biological and physico-chemical remediation technologies can be efficient in terms of spill cleanup and microorganisms—mainly bacteria—are the main ones responsible for petroleum hydrocarbons (PHCs) degradation such as crude oil. Currently, biodegradation is considered as one of the most sustainable and efficient techniques for the removal of PHCs. However, environmental factors associated with the functioning and performance of microorganisms involved in hydrocarbon-degradation have remained relatively unclear. This has limited our understanding on how to select and inoculate microorganisms within technologies of cleaning and to optimize physico-chemical remediation and degradation methods. This review article presents the latest discoveries in bioremediation techniques such as biostimulation, bioaugmentation, and biosurfactants as well as immobilization strategies for increasing the efficiency. Besides, environmental affecting factors and microbial strains engaged in bioremediation and biodegradation of PHCs in marines are discussed.

Physiological changes in Rhodococcus ruber S103 immobilized on biobooms using low-cost media enhance stress tolerance and crude oil-degrading activity

For economic feasibility, sugarcane molasses (0.5%, w/v) containing K₂HPO₄ (0.26%, w/v) and mature coconut water, low value byproducts, were used in cultivation of Rhodococcus ruber S103 for inoculum production and immobilization, respectively. Physiological changes of S103 grown in low-cost media, including cell hydrophobicity, saturated/unsaturated ratio of cellular fatty acids and biofilm formation activity, enhanced stress tolerance and crude oil biodegradation in freshwater and even under high salinity (5%, w/v). Biobooms comprised of S103 immobilized on polyurethane foam (PUF) was achieved with high biomass content (10¹⁰ colony-forming units g^-1 PUF) via a scale-up process in a 5-L modified fluidized-bed bioreactor within 3 days. In a 500-L mesocosm, natural freshwater was spiked with crude oil (72 g or 667 mg g^-1 dry biobooms), and a simulated wave was applied. Biobooms could remove 100% of crude oil within only 3 days and simultaneously biodegraded 60% of the adsorbed oil after 7 days when compared to boom control with indigenous bacteria. In addition, biobooms had a long shelf-life (at least 100 days) with high biodegradation activity (85.2 ± 2.3%) after storage in 10% (w/v) skimmed milk at room temperature. This study demonstrates that the low-cost production of biobooms has potential for future commercial bioremediation.

Kinetic and statistical perspectives on the interactive effects of recalcitrant polyaromatic and sulfur heterocyclic compounds and in-vitro nanobioremediation of oily marine sediment at microcosm level

A halotolerant biosurfactant producer Pseudomonas aeruginosa strain NSH3 (NCBI Gene Bank Accession No. MN149622) was isolated to degrade high concentrations of recalcitrant polyaromatic hydrocarbons (PAHs) and polyaromatic heterocyclic sulfur compounds (PASHs). In biphasic batch bioreactors, the biodegradation and biosurfactant-production activities of NSH3 have been significantly enhanced (p < 0.0001) by its decoration with eco-friendly prepared magnetite nanoparticles (MNPs). On an artificially contaminated sediment microcosm level, regression modeling and statistical analysis based on a 2³ full factorial design of experiments were trendily applied to provide insights into the interactive impacts of such pollutants. MNPs-coated NSH3 were also innovatively applied for nanobioremediation (NBR) of in-vitro diesel oil-polluted sediment microcosms. Gravimetric, chromatographic, and microbial respiratory analyses proved the significantly enhanced biodegradation capabilities of MNPs-coated NSH3 (p < 0.001) and the complete mineralization of various recalcitrant diesel oil components. Kinetic analyses showed that the biodegradation of iso- and n-alkanes was best fitted with a second-order kinetic model equation. Nevertheless, PAHs and PASHs in biphasic batch bioreactors and sediment microcosms followed the first-order kinetic model equation. Sustainable NBR overcome the toxicity of low molecular weight hydrocarbons, mass transfer limitation, and steric hindrance of hydrophobic recalcitrant high molecular weight hydrocarbons and alkylated polyaromatic compounds.

Recent advancements in hydrocarbon bioremediation and future challenges: a review

Petrochemicals are important hydrocarbons, which are one of the major concerns when accidently escaped into the environment. On one hand, these cause soil and fresh water pollution on land due to their seepage and leakage from automobile and petrochemical industries. On the other hand, oil spills occur during the transport of crude oil or refined petroleum products in the oceans around the world. These hydrocarbon and petrochemical spills have not only posed a hazard to the environment and marine life, but also linked to numerous ailments like cancers and neural disorders. Therefore, it is very important to remove or degrade these pollutants before their hazardous effects deteriorate the environment. There are varieties of mechanical and chemical methods for removing hydrocarbons from polluted areas, but they are all ineffective and expensive. Bioremediation techniques provide an economical and eco-friendly mechanism for removing petrochemical and hydrocarbon residues from the affected sites. Bioremediation refers to the complete mineralization or transformation of complex organic pollutants into the simplest compounds by biological agents such as bacteria, fungi, etc. Many indigenous microbes present in nature are capable of detoxification of various hydrocarbons and their contaminants. This review presents an updated overview of recent advancements in various technologies used in the degradation and bioremediation of petroleum hydrocarbons, providing useful insights to manage such problems in an eco-friendly manner.

Studying the efficiency of the multiple biofilters in the reduction of pollutants from wastewater

The Microorganisms: yeast Sporobolomyces yunnanensis, Rhodotorula mucilaginosa and Kluyveromyces marxianusin growth of 184× 106 ± 15 cell\ml, and bacteria Pseudomonas aeruginosa and Bacillus cereus in the growth of 9 – 15× 108 ± 5 cell\ml, and algae Chlorella vulgaris in the growth of 45 × 105 ± 5 cell\ ml were selected as a bio filter to reduce organic and nonorganic pollutants from wastewater by COD, TOC, TN and TP concentrations of 455, 151, 9.5 and 31 ppm in treatment period 4, 6 and 18 hr. and pH of 7-8 in 25 Co as a Batch culture system. The yeasts showed ability to reduce COD concentration by 50-64% in 18 hr. treatment period, and the bacteria showed the ability to reduce COD, TOC, TN and TP concentrations by 59-69%, 57-66%, 53-63% and 40-55% in 18 hr. treatment period. At the same time, algae showed efficiency in reducing TN and TP by 81, 82%. The selective microorganisms showed high efficiency as a biofilter to reduce pollutants concentrations from wastewater in three serial steps by a treatment period of 6 hr in each step with a high ability to reduce COD, TOC, TN , and TP concentrations by 83, 91, 100, and 100% in 18 hr. treatment period. Ultimately, this study demonstrated the high efficiency of the multiple biofilters consisting of bacteria, yeasts, and algae in reducing the concentration of pollutants in sewage wastewater. Keyword. Multiple biofilters, Bacteria, Yeast, Algae, COD, TOC, TN.

Novel Ti3C2Tx MXene wrapped wood sponges for fast cleanup of crude oil spills by outstanding Joule heating and photothermal effect

Remediation of crude oil spills is a great challenge owing to the poor mobility and high viscosity of crude oil. Herein, a porous polydimethylsiloxane@wood sponge/MXene (PDMS@WSM) with outstanding compressibility and hydrophobic/lipophilic ability was demonstrated as crude oil absorbent. The surface temperature of PDMS@WSM could quickly rise to 80 °C with a working voltage of 4 V and to 66 °C under simulated sunlight irradiation of 1.5 KW m^-2, respectively. Due to the excellent Joule heating and photothermal conversion effect, the PDMS@WSM displayed maximum adsorption capacity of 11.2×10⁵ g m^-3 within 6 min. The PDMS@WSM showed preferable reusability and cycle stability because of its brilliant compressibility. Moreover, the oil-collecting device based on PDMS@WSM could continuously collect crude oil spills, achieving an active collection of 25 mL crude oil within 150 s. Therefore, the porous PDMS@WSM absorbent exhibited great potential for crude oil spills remediation, energy regulation, and desalination of hypersaline water.

Methyl Orange Biodegradation by Immobilized Consortium Microspheres: Experimental Design Approach, Toxicity Study and Bioaugmentation Potential

Methyl orange (MO) is categorized among the recalcitrant and refractory xenobiotics, representing a significant burden in the ecosystem. To clean-up the surrounding environment, advances in microbial degradation have been made. The main objective of this study was to investigate the extent to which an autochthonous consortium immobilized in alginate beads can promote an efficient biodegradation of MO. By employing response surface methodology (RSM), a parametric model explained the interaction of immobilized consortium (Raoultella planticola, Ochrobactrum thiophenivorans, Bacillus flexus and Staphylococcus xylosus) to assimilate 200 mg/L of MO in the presence of 40 g/L of NaCl within 120 h. Physicochemical analysis, including UV-Vis spectroscopy and FTIR, and monitoring of the degrading enzymes (azoreductase, DCIP reductase, NADH reductase, laccase, LiP, MnP, nitrate reductase and tyrosinase) were used to evaluate MO degradation. In addition, the toxicity of MO-degradation products was investigated by means of phytotoxicity and cytotoxicity. Chlorella vulgaris retained its photosynthetic performance (>78%), as shown by the contents of chlorophyll-a, chlorophyll-b and carotenoids. The viability of normal lung and kidney cell lines was recorded to be 90.63% and 99.23%, respectively, upon exposure to MO-metabolic outcomes. These results reflect the non-toxicity of treated samples, implying their utilization in ferti-irrigation applications and industrial cooling systems. Moreover, the immobilized consortium was employed in the bioremediation of MO from artificially contaminated agricultural and industrial effluents, in augmented and non-augmented systems. Bacterial consortium remediated MO by 155 and 128.5 mg/L in augmented systems of agricultural and industrial effluents, respectively, within 144 h, revealing its mutual synergistic interaction with both indigenous microbiotas despite differences in their chemical, physical and microbial contents. These promising results encourage the application of immobilized consortium in bioaugmentation studies using different resources.

Improving the bioremediation technology of contaminated wastewater using biosurfactants produced by novel bacillus isolates

Biosurfactants have many advantages outside chemical one, led for application it through different sectors. So, the present study aimed for improving the bioremediation technology of contaminated wastewater using biosurfactants produced by novel bacillus isolates. In this regard, Bacillus thuringiensis and Bacillus toyonensis strains were obtained as most producing isolates of highly active biosurfactants. The optimized conditions for high biosurfactants yield production were established. Also, the stability of the produced biosurfactants at various conditions, pH, temperature and salinity was studied. The biosurfactant has been reported up to 120 °C, pH 12 and 10% of NaCl. The identified biosurfactants, decanoic acid and oleamide were applied for wastewater remediation from oil residues and pathogens contamination. The biosurfactant was had high antibacterial activity compared with references antimicrobial drugs, as well as it is enhanced bioremediation technology for petroleum oil residues contaminating sites. Thus, we can say, these biosurfactants could achieve the objectives of sustainable development.

Potential biodegradation of Tapis Light Crude Petroleum Oil, using palm oil mill effluent final discharge as biostimulant for isolated halotolerant Bacillus strains

Petroleum hydrocarbon pollution in marine waters has been an extremely significant environmental and health issue worldwide. This study aims at constructing an efficient indigenous bacterial consortium to biodegrade Tapis Light Crude Petroleum Oil (TLCO). The local agro-industrial wastewater of palm oil mill effluent final discharge (POME FD) was used as biostimulant to enhance the biodegradation efficiency. In this study, three TLCO degrading bacteria were isolated from seawater samples collected. Molecular identification using 16S rRNA genes sequencing was done and results show that these isolated strains belong to: Bacillus tropicus, Bacillus licheniformis and Bacillus subtilis. Bacterial consortium tested using four different concentrations of POME FD (0.1, 0.25, 0.5, and 1%) as biostimulant and TLCO (0.5 and 1.0%) degradation capability was investigated. The residual TLCO in culture medium after 40 days was analysed. The results confirmed that POME FD dosage of 0.25% is optimum for the bacterial consortium and can degrade 99.85% of TLCO at 0.5%. However, TLCO degradation with POME FD dosage (0.25%) in TLCO (1.0%) was found optimum, with biodegradation reaching up to 95.23% in 40 days. This study is a beginning for the future development of a consortium of petroleum hydrocarbon degrading bacteria to mitigate oil spills in the Malaysian shoreline.

Bioremediation perspectives and progress in petroleum pollution in the marine environment: a review

The marine environment is often affected by petroleum hydrocarbon pollution due to industrial activities and petroleum accidents. This pollution has recalcitrant and persistent compounds that pose a high risk to the ecological system and human health. For this reason, the world claims to seek to clean up these pollutants. Bioremediation is an attractive approach for removing petroleum pollution. It is considered a low-cost and highly effective approach with fewer side effects compared to chemical and physical techniques. This depends on the metabolic capability of microorganisms involved in the degradation of hydrocarbons through enzymatic reactions. Bioremediation activities mostly depend on environmental conditions such as temperature, pH, salinity, pressure, and nutrition availability. Understanding the effects of environmental conditions on microbial hydrocarbon degraders and microbial interactions with hydrocarbon compounds could be assessed for the successful degradation of petroleum pollution. The current review provides a critical view of petroleum pollution in seawater, the bioavailability of petroleum compounds, the contribution of microorganisms in petroleum degradation, and the mechanisms of degradation under aerobic and anaerobic conditions. We consider different biodegradation approaches such as biostimulation, bioaugmentation, and phytoremediation.

Molecular mechanisms and biochemical analysis of fluorene degradation by the Pseudomonas sp. SMT-1 strain

Fluorene is a harmful organic toxicant extensively disseminated in the water and dry land ecosystem. Its toxicity and ubiquitous presence pose issues concerning its biodegradation. Characterization of the molecular mechanisms of fluorene degradation, detection of metabolites, and appraisal of its viability in toxicant removal by the SMT-1 Pseudomonas sp. strain are the main purposes of this study. In this work, the catabolic intermediates were identified from resting cell reactions of the SMT-1 strain as well as the involved catabolic pathway of fluorene. Based on liquid chromatography mass spectrometry analysis, the identified intermediates were 9-fluorenone; 3,4-dihydroxy-9-fluorenone; phthalate and protocatechuic acid. The specific primers were designed to amplify the fluorene-degrading 4921 dioxygenase gene segment from the SMT-1 Pseudomonas sp. strain. The 4921 dioxygenase gene was expressed, purified and characterized. The apparent K _m and V _max values were 25.99 µM min^-1 and 0.77 U mg^-1, respectively. The enzyme was most active at pH 7.5 and 25 °C in Tris-HCl buffer and was identified by measuring the initial reaction velocity for 1 min. Effect of metal salts on enzyme activity was accessed to see the impact on protein stability. Most of the analyzed metal salts inhibited enzyme activity to different degrees, and exhibited very low activity in the presence of FeCl_3. Understanding the physiological, metabolic pathway and molecular mechanism of fluorene degradation is an important factor in increasing significant information of this biological process. This strain may serve as a potential candidate for further use in the bioremediation process to treat organic toxicant contaminated sites.

Carbon Nanotubes and Polydopamine Modified Poly(dimethylsiloxane) Sponges for Efficient Oil-Water Separation

In this paper, effective separation of oil from both immiscible oil-water mixtures and oil-in-water (O/W) emulsions are achieved by using poly(dimethylsiloxane)-based (PDMS-based) composite sponges. A modified hard template method using citric acid monohydrate as the hard template and dissolving it in ethanol is proposed to prepare PDMS sponge composited with carbon nanotubes (CNTs) both in the matrix and the surface. The introduction of CNTs endows the composite sponge with enhanced comprehensive properties including hydrophobicity, absorption capacity, and mechanical strength than the pure PDMS. We demonstrate the successful application of CNT-PDMS composite in efficient removal of oil from immiscible oil-water mixtures within not only a bath absorption, but also continuous separation for both static and turbulent flow conditions. This notable characteristic of the CNT-PDMS sponge enables it as a potential candidate for large-scale industrial oil-water separation. Furthermore, a polydopamine (PDA) modified CNT-PDMS is developed here, which firstly realizes the separation of O/W emulsion without continuous squeezing of the sponge. The combined superhydrophilic and superoleophilic property of PDA/CNT-PDMS is assumed to be critical in the spontaneously demulsification process.