Measurement of Air Pollution Parameters in Montenegro Using the Ecomar System

Air quality in a revitalized special economic zone at the center of an urban monocentric agglomeration

In this study, we have examined the air quality within a revitalized, post-industrial urban area in Łódź, Poland. The use of Dron technology with mobile measurement equipment allowed for accurate assessment of air quality (particulate matter and gaseous pollutants) and factors influencing air quality (wind speed and direction) on a local scale in an area of 0.18 km2 and altitudes from 2 to 50 m. The results show that the revitalization carried out in the Lodz special economic zone area contributed to eliminate internal air pollution emitters through the use of ecological and effective heat sources. The exceedances permissible concentration values were local, and concerned mainly the higher measurement zones of the troposphere (more than 30 m above ground level). In the case of gaseous pollutants, higher wind speeds were associated with a decrease in the concentration of SO2 and an increase in H2S concentration. In both cases, the wind contributed to the occurrence of local areas of accumulation of these gaseous pollutants in the spaces between buildings or wooded areas.

Exploring the Potential of Big Data Analytics in Urban Epidemiology Control: A Comprehensive Study Using CiteSpace

In recent years, there has been a growing amount of discussion on the use of big data to prevent and treat pandemics. The current research aimed to use CiteSpace (CS) visual analysis to uncover research and development trends, to help academics decide on future research and to create a framework for enterprises and organizations in order to plan for the growth of big data-based epidemic control. First, a total of 202 original papers were retrieved from Web of Science (WOS) using a complete list and analyzed using CS scientometric software. The CS parameters included the date range (from 2011 to 2022, a 1-year slice for co-authorship as well as for the co-accordance assessment), visualization (to show the fully integrated networks), specific selection criteria (the top 20 percent), node form (author, institution, region, reference cited, referred author, journal, and keywords), and pruning (pathfinder, slicing network). Lastly, the correlation of data was explored and the findings of the visualization analysis of big data pandemic control research were presented. According to the findings, "COVID-19 infection" was the hottest cluster with 31 references in 2020, while "Internet of things (IoT) platform and unified health algorithm" was the emerging research topic with 15 citations. "Influenza, internet, China, human mobility, and province" were the emerging keywords in the year 2021-2022 with strength of 1.61 to 1.2. The Chinese Academy of Sciences was the top institution, which collaborated with 15 other organizations. Qadri and Wilson were the top authors in this field. The Lancet journal accepted the most papers in this field, while the United States, China, and Europe accounted for the bulk of articles in this research. The research showed how big data may help us to better understand and control pandemics.

Modeling and implementation of a low-cost IoT-smart weather monitoring station and air quality assessment based on fuzzy inference model and MQTT protocol

The automatic weather system serves to inform farmers, tourists, planners, and others with precise information to help them take the appropriate action. Today, with the advancement of smart technologies, the system has evolved into many sensing methods to gather real-time climate data. This article investigates the modeling and implementation of a low-cost weather station device that also functions to measure air quality. The proposed system based on the Internet of Things (IoT) allows access to real-time climate data for a given area. This system monitors environmental conditions such as ambient temperature, humidity, atmospheric pressure, altitude, and levels of harmful atmospheric gases like CO2 and NO2. This real-time telemetry device uses MQ-135, DHT-11 and BMP280 sensors to gather data. The ESP32 board processes the obtained data from all sensors. Additionally, we present a model for a fuzzy inference system (FIS) that performs parameter categorization using a reasoning procedure and incorporates the results into an air quality index (AQI) that describes the levels of pollution for Al Hoceima city. The FIS takes CO2 and NO2 values as input and returns the AQI. The AQI for Al Hoceima city is categorized into six levels: Excellent, Good, Regular, Bad, Dangerous, and Very Dangerous. Furthermore, the suggested system's block hardware employs the Message Queuing Telemetry Transport (MQTT) protocol to broadcast collected data to a mobile and web application via the Internet. The suggested IoT-embedded device was tested in real life, and the results were promising.

High Levels of PM10 Reduce the Physical Activity of Professional Soccer Players

The aim of this study is to determine the impact of air quality, analyzed on the basis of the PM10 parameter in three regions of Poland, on the physical activity of soccer players from the Polish Ekstraklasa. The study material consisted of 4294 individual match observations of 362 players during the 2019/2020 domestic season. The measured indices included the parameter of air quality-PM10-and players' physical activities: total distance (TD) and high-speed running (HSR). Poland was divided into three regions (North, Central, South). The statistical analysis of particulate matter (PM) and athletes' physical activities, compared by region, revealed the effects in relation to the PM10 (H = 215.6566(2); p = 0.0001) and TD (H = 28.2682(2); p = 0.0001). Players performed better in regards to physical parameters in the North Region, where air pollution is significantly lower than in other regions. This means that even a short stay in more polluted regions can reduce the performance of professional footballers, which can indirectly affect the outcome of the match. Therefore, greater actions should be taken to improve air quality, especially through changes in daily physical activity, as this will reduce the carbon footprint.

Differentiating Semi-Volatile and Solid Particle Events Using Low-Cost Lung-Deposited Surface Area and Black Carbon Sensors

Low-cost particle sensors have proven useful in applications such as source apportionment, health, and reactivity studies. The benefits of these instruments increase when used in parallel, as exemplified with a 3-month long deployment in an urban background site. Using two lung-deposited surface area (LDSA) instruments, a low-cost method was developed to assess the solid component of an aerosol by applying a catalytic stripper to the inlet stream of one LDSA instrument, resulting in only the solid fraction of the sample being measured (LDSAc). To determine the semi-volatile fraction of the sample, the LDSAC was compared to the LDSA without a catalytic stripper, thus measuring all particles (LDSAN). The ratio of LDSA (LDSAC/LDSAN) was used to assess the fraction of solid and semi-volatile particles within a sample. Here, a low ratio represents a high fraction of semi-volatile particles, with a high ratio indicating a high fraction of solid particles. During the 3-month urban background study in Birmingham, UK, it is shown that the LDSA ratios ranged from 0.2–0.95 indicating a wide variation in sources and subsequent semi-volatile fraction of particles. A black carbon (BC) instrument was used to provide a low-cost measure of LDSA to BC ratio. Comparatively, the LDSA to BC ratios obtained using low-cost sensors showed similar results to high-cost analyses for urban environments. During a high LDSAC/LDSAN ratio sampling period, representing high solid particle concentrations, an LDSA to BC probability distribution was shown to be multimodal, reflecting urban LDSA to BC ratio distributions measured with laboratory-grade instrumentation. Here, a low-cost approach for data analyses presents insight on particle characteristics and insight into PM composition and size, useful in source apportionment, health, and atmospheric studies.