Challenges for the development of new non-toxic antifouling solutions

Silk Gland Factor 1 Plays a Pivotal Role in Larval Settlement of the Fouling Mussel Mytilopsis sallei

Most fouling organisms have planktonic larval and benthic adult stages. Larval settlement, the planktonic-benthic transition, is the critical point when biofouling begins. However, our understanding of the molecular mechanisms of larval settlement is limited. In our previous studies, we identified that the AMP-activated protein kinase-silk gland factor 1 (AMPK-SGF1) pathway was involved in triggering the larval settlement in the fouling mussel M. sallei. In this study, to further confirm the pivotal role of SGF1, multiple targeted binding compounds of SGF1 were obtained using high-throughput virtual screening. It was found that the targeted binding compounds, such as NAD+ and atorvastatin, could significantly induce and inhibit the larval settlement, respectively. Furthermore, the qRT-PCR showed that the expression of the foot proteins' genes was significantly increased after the exposure to 10 μM NAD+, while the gene expression was significantly suppressed after the exposure to 10 μM atorvastatin. Additionally, the production of the byssus threads of the adults was significantly increased after the exposure to 10-20 μM of NAD+, while the production of the byssus threads was significantly decreased after the exposure to 10-50 μM of atorvastatin. This work will deepen our understanding of SGF1 in triggering the larval settlement in mussels and will provide insights into the potential targets for developing novel antifouling agents.

Enhanced antifouling and antibacterial performances of novel UV-curable polysiloxane/microcapsules/Ag composite coatings for marine applications

Marine biological fouling is a widespread phenomenon encountered by various oceanic ships and naval vessels, resulting in enormous economic losses. Herein, novel 4,5-dichloro-2-octyl-isothiazolone@sodium alginate/chitosan microcapsules (DCOIT@ALG/CS) were prepared through composite gel method using DCOIT as core materials, ALG and CS as shells, and CaCl2 as the cross-linking agent. The formed microcapsules (MCs) with Ag nanoparticles (AgNPs) were then filled in UV-curable polysiloxane (UV-PDMS), followed by UV irradiation to yield UV-PDMS/microcapsules/AgNPs (UV-PDMS/MCs/Ag) composite coatings. The constructed micro-nano dual-scale surface using the MCs and AgNPs improved the antifouling and antibacterial properties of UV-PDMS/MCs/Ag coatings. The as-obtained UV-PDMS/MCs/Ag coatings exhibited a static contact angle of about 160°, shear strength of 2.24 MPa, tensile strength of 3.32 MPa and elongation at break of 212%. The synergistic bacteriostatic effects of DCOIT and AgNPs in UV-PDMS/MCs/Ag coatings resulted in a bactericidal rate of 200 μg ml-1 towards Escherichia coli and Staphylococcus aureus with saturation at 100% within 10 min. In sum, the proposed composite coatings look promising for future marine transportation, pipeline networks and undersea facilities.

Diffusely Charged Polymeric Zwitterions as Loosely Hydrated Marine Antifouling Coatings

Polymeric zwitterions exhibit exceptional fouling resistance through the formation of a strongly hydrated surface of immobilized water molecules. While being extensively tested for their performance in biomedical, membrane, and, to a lesser extent, marine environments, few studies have investigated how the molecular design of the zwitterion may enhance its performance. Furthermore, while theories of zwitterion antifouling mechanisms exist for molecular-scale foulant species (e.g., proteins and small molecules), it remains unclear how molecular-scale mechanisms influence the micro- and macroscopic interactions of relevance for marine applications. The present study addresses these gaps through the use of a modular zwitterion chemistry platform, which is characterized by a combination of surface-sensitive sum frequency generation (SFG) vibrational spectroscopy and marine assays. Zwitterions with increasingly delocalized cations demonstrate improved fouling resistance against the green alga Ulva linza. SFG spectra correlate well with the assay results, suggesting that the more diffuse charges exhibit greater surface hydration with more bound water molecules. Hence, the number of bound interfacial water molecules appears to be more influential in determining the marine antifouling activities of zwitterionic polymers than the binding strength of individual water molecules at the interface.

Chemical diversity and antifouling activity of geniculate calcareous algae (Corallinales, Rhodophyta) from Brazil

Marine biofouling is a natural process by which many organisms colonize and grow in submerged structures, causing serious economic consequences for the maritime industry. Geniculate calcareous algae (GCA; Corallinales, Rhodophyta) produce bioactive secondary metabolites and are a promise for new antifouling compounds. Here, we investigated the antifouling activity of four GCA species-Amphiroa beauvoisii, Jania sagittata (formerly Cheilosporum sagittatum), Jania crassa, and Jania prolifera (formerly Amphiroa flabellata)-from the Brazilian coast against macro- and microorganisms. Simultaneously, metabolomic tools were applied to assess the chemical profiles of these seaweeds using gas chromatography coupled to mass spectrometry (GC-MS). Data analysis by principal component and molecular networking analyses used the global natural products social molecular networking platform (GNPS). Our results showed that all extracts were active against different strains of marine bacteria and that the J. sagittata (JsSI) extract showed the highest percentage of bacterial inhibition. The J. sagittata (JsSI) extract was the most active against the mussel Perna perna, showing 100% byssus inhibition. Regarding toxicity, only the J. crassa (JcP) extract showed a 20% mortality rate. The chemical profiles of the evaluated GCA extracts differed qualitatively and quantitatively. Yet, the steroid (3β)-cholest-5-en-3-ol was the major compound commonly identified in all extracts, with the exception of J. sagittata (JsSI). Moreover, we observed intra- and interspecific chemical variabilities among GCA extracts for the different populations, which could explain their antifouling activity variability. This study contributed new information about the chemical compounds produced by this group of seaweeds and showed its antifouling potential. These GCA species may be the subject of future studies to obtain new bioactive compounds with biotechnological potential in maritime areas.

"Omics" Techniques Used in Marine Biofouling Studies

Biofouling is the growth of organisms on wet surfaces. Biofouling includes micro- (bacteria and unicellular algae) and macrofouling (mussels, barnacles, tube worms, bryozoans, etc.) and is a major problem for industries. However, the settlement and growth of some biofouling species, like oysters and corals, can be desirable. Thus, it is important to understand the process of biofouling in detail. Modern "omic" techniques, such as metabolomics, metagenomics, transcriptomics, and proteomics, provide unique opportunities to study biofouling organisms and communities and investigate their metabolites and environmental interactions. In this review, we analyze the recent publications that employ metagenomic, metabolomic, and proteomic techniques for the investigation of biofouling and biofouling organisms. Specific emphasis is given to metagenomics, proteomics and publications using combinations of different "omics" techniques. Finally, this review presents the future outlook for the use of "omics" techniques in marine biofouling studies. Like all trans-disciplinary research, environmental "omics" is in its infancy and will advance rapidly as researchers develop the necessary expertise, theory, and technology.

Long-lasting biofouling formation on transparent fouling-release coatings for the construction of efficient closed photobioreactors

In order to build an efficient closed-photobioreactor (PBR) in which biofouling formation is avoided, a non-toxic coating with high transparency is required, which can be applied to the interior surface of the PBR walls. Nowadays, amphiphilic copolymers are being used to inhibit microorganism adhesion, so poly(dimethylsiloxane)-based coatings mixed with poly(ethylene glycol)-based copolymers could be a good option. The 7 poly(dimethylsiloxane)-based coatings tested in this work contained 4% w/w of poly(ethylene glycol)-based copolymers. All were a good alternative to glass because they presented lower cell adhesion. However, the DBE-311 copolymer proved the best option due to its very low cell adhesion and high transmittance. Furthermore, XDLVO theory indicates that these coatings should have no cell adhesion at time 0 since they create a very high-energy barrier that microalgae cells cannot overcome. Nevertheless, this theory also shows that their surface properties change over time, making cell adhesion possible on all coatings after 8 months of immersion. The theory is useful in explaining the interaction forces between the surface and microalgae cells at any moment in time, but it should be complemented with models to predict the conditioning film formation and the contribution of the PBR's fluid dynamics over time.

Biofouling and Antifouling: Interactions between Microbes and Larvae of Invertebrates

The biofouling process refers to the undesirable accumulation of micro- and macro-organisms on manufactured surfaces [...]

TRPM7-Mediated Ca2+ Regulates Mussel Settlement through the CaMKKβ-AMPK-SGF1 Pathway

Many marine invertebrates have planktonic larval and benthic juvenile/adult stages. When the planktonic larvae are fully developed, they must find a favorable site to settle and metamorphose into benthic juveniles. This transition from a planktonic to a benthic mode of life is a complex behavioral process involving substrate searching and exploration. Although the mechanosensitive receptor in the tactile sensor has been implicated in sensing and responding to surfaces of the substrates, few have been unambiguously identified. Recently, we identified that the mechanosensitive transient receptor potential melastatin-subfamily member 7 (TRPM7) channel, highly expressed in the larval foot of the mussel Mytilospsis sallei, was involved in substrate exploration for settlement. Here, we show that the TRPM7-mediated Ca2+ signal was involved in triggering the larval settlement of M. sallei through the calmodulin-dependent protein kinase kinase β/AMP-activated protein kinase/silk gland factor 1 (CaMKKβ-AMPK-SGF1) pathway. It was found that M. sallei larvae preferred the stiff surfaces for settlement, on which TRPM7, CaMKKβ, AMPK, and SGF1 were highly expressed. These findings will help us to better understand the molecular mechanisms of larval settlement in marine invertebrates, and will provide insights into the potential targets for developing environmentally friendly antifouling coatings for fouling organisms.

Nanotechnology: the Alternative and Efficient Solution to Biofouling in the Aquaculture Industry

Biofouling is a global issue in aquaculture industries. It adversely affects marine infrastructure (ship's hulls, mariculture cages and nets, underwater pipes and filters, building materials, probes, and sensor devices). The estimated cost of managing marine biofouling accounts for 5-10% of production cost. Non-toxic foul-release coating and biocide-based coating are the two current approaches. Recent innovation and development of a surface coating with nanoparticles such as photocatalytic zinc oxide nanocoating on fishing nets, copper oxide nanocoating on the water-cooling system, and silver nanoparticle coating to inhibit microalgal adhesion on submerged surfaces under natural light (photoperiod) could present meaningful anti-biofouling application. Nanocoating of zinc, copper, and silver oxide is an environmentally friendly surface coating strategy that avoid surface adhesion of bacteria, diatoms, algal, protozoans, and fungal species. Such nanocoating could also provide a solution to strains tolerant to Cu, Zn, and Ag. This draft of the special issue demonstrates the anti-biofouling potential of various metal and metal oxide nanoparticle coating to combat aquaculture industry biofouling problems.

Environmental and Economic Impact of an Innovative Biocide-Free Antifouling Coating for Naval Applications

The work provides an economic sustainability and environmental impact analysis for the validation of a biocide-free antifouling coating for marine applications able to reduce fuel consumption during navigation, CO₂ emissions, and the overall environmental impacts associated with shipping, thanks to the reduction of incrustation and the avoidance of biocides release into the water. The results, related to the life cycle of the coating of a motor yacht, with an average sailing life of 25 years, show around 8.8% reduction in overall costs compared to a conventional paint, thanks to a more efficient antifouling action, which reduces the annual fuel consumption by ~13,700 kg/y, or ~9.6%. This leads to a reduction in CO₂ emissions, associated with fuel consumption, of ~43.3 ton/y, as well as a lowering of the overall environmental impacts associated with the life cycle of the paint, by almost 10% for the most impactful damage classes, ensuring a greater environmental sustainability of the innovative coating, for the overall service life of the yacht on which it is applied.

Developing an Effective and Durable Film for Marine Fouling Prevention from PDMS/SiO2 and PDMS/PU with SiO2 Composites

Polymer film coating with a highly hydrophobic surface property is a practical approach to prevent fouling of any structures in the marine environment without affecting marine microorganisms. The preparation of a polymer coating, from a simple and easy method of solution blending of hydrophobic polydimethylsiloxane elastomer and hydrophilic polyurethane with SiO₂, was carried out in this study, with the aim of improving characteristics, and the coating demonstrated economic feasibility for antifouling application. Incorporation of SiO₂ particles into PDMS and PDMS/PU polymer film improved mechanical properties of the film and the support fabrication of micropatterns by means of a soft lithography process. Observations from field emission scanning electron microscope (FESEM) of the PDMS/SiO₂ composite film revealed a homogeneous morphology and even dispersion of the SiO₂ disperse phase between 1–5 wt.%. Moreover, the PDMS film with 3 wt.% loading of SiO₂ considerably increased WCA to 115.7° ± 2.5° and improved mechanical properties by increasing Young’s modulus by 128%, compared with neat PDMS film. Additionally, bonding strength between barnacles and the PDMS film with 3 wt.% of SiO₂ loading was 0.16 MPa, which was much lower than the bonding strength between barnacles and the reference carbon steel of 1.16 MPa. When compared to the previous study using PDMS/PU blend (95:5), the count of barnacles of PDMS with 3 wt.% SiO₂ loading was lower by 77% in the two-week field tests and up to 97% in the eight-week field tests. Subsequently, when PDMS with 3 wt.% SiO₂ was further blended with PU, and the surface modified by the soft lithography process, it was found that PDMS/PU (95:5) with 3 wt.% SiO₂ composite film with micropatterns increased WCA to 122.1° ± 2.9° and OCA 90.8 ± 3.6°, suggesting that the PDMS/PU (95:5) with 3 wt.% SiO₂ composite film with surface modified by the soft lithography process could be employed for antifouling application.

Preparation and Properties of Environmentally Friendly Marine Antifouling Coatings Based on a Collaborative Strategy

Long-term and green marine antifouling coatings are an important means to prolong the service life of ships and other marine instruments and equipment. To accomplish this, we prepared three new green and high-efficiency antifouling coatings containing phthalimide derivatives inspired by capsaicin (PDIC-AC) by using a collaborative strategy that incorporates self-polishing, fouling repelling, and antifouling properties. Static simulation tests confirmed that the zinc acrylate resin of the PDIC-AC has excellent self-polishing properties due to changes in the roughness, surface free energy, and mass loss. Antifouling tests demonstrated that both PDIC and PDIC-AC possess efficient antibacterial and anti-algal effects. Moreover, marine field tests showed that the PDIC-AC are highly antifouling for at least 9 months, and their antifouling effect is similar to that of an antifouling coating with chlorothalonil (CT-AC). The collaborative strategy in this study can be used to research and develop long-term environmentally friendly antifouling coatings.

Anti-barnacle biofouling coatings for the protection of marine vessels: synthesis and progress

Marine biofouling has gnawed both mobile and non-mobile marine structures since time immemorial, leading to the deterioration of designed operational capabilities as well as a loss of valuable economic revenues. Mitigation of biofouling has been the primary focus of researchers and scientists from across the globe to save billions of dollars wasted due to the biological fouling of marine structures. The availability of an appropriate environment along with favorable substrata initiates biofilm formation within a few minutes. The crucial element in establishing a gelatinous biofilm is the excreted metabolites of destructive nature and exopolymeric substances (EPSs). These help in securing as well as signaling numerous foulants to establish themselves on this substrate. The larvae of various benthic invertebrates adhere to these suitable surfaces and transform from juveniles to adult barnacles depending upon the environment. Despite biofouling being characteristically witnessed for a month or lengthier timeframe, the preliminary phases of the fouling process typically transpire on a much lesser timescale. A few natural and synthetic additives had demonstrated excellent non-toxic anti barnacle establishment capability; however, further development into commercial products is still far-fetched. This review collates the specific anti-barnacle coatings, emphasizing natural additives, their sources of extraction, general life cycle analysis, and concluding future perspectives of this niche product.

3D Printed Metal Oxide-Polymer Composite Materials for Antifouling Applications

Current technology to prevent biofouling usually relies on the use of toxic, biocide-containing materials, which can become a serious threat to marine ecosystems, affecting both targeted and nontargeted organisms. Therefore, the development of broad-spectrum, less toxic antifouling materials is a challenge for researchers; such materials would be quite important in applications like aquaculture. In this respect, surface chemistry, physical properties, durability and attachment scheme can play a vital role in the performance of the materials. In this work, acrylonitrile butadiene styrene (ABS)/micro ZnO or nano ZnO composite lattices with different metal oxide contents were developed using 3D printing. Their antifouling behavior was examined with respect to aquaculture applications by monitoring growth on them of the diatoms Navicula sp. and the monocellular algae Chlorella sp. with image analysis techniques. As shown, the presence of metal oxides in the composite materials can bring about antifouling ability at particular concentrations. The present study showed promising results, but further improvements are needed.

Antifouling Activity of Halogenated Compounds Derived from the Red Alga Sphaerococcus coronopifolius: Potential for the Development of Environmentally Friendly Solutions

Nowadays, biofouling is responsible for enormous economic losses in the maritime sector, and its treatment with conventional antifouling paints is causing significant problems to the environment. Biomimetism and green chemistry approaches are very promising research strategies for the discovery of new antifouling compounds. This study focused on the red alga Sphaerococcus coronopifolius, which is known as a producer of bioactive secondary metabolites. Fifteen compounds, including bromosphaerol (1), were tested against key marine biofoulers (five marine bacteria and three microalgae) and two enzymes associated with the adhesion process in macroalgae and invertebrates. Each metabolite presented antifouling activity against at least one organism/enzyme. This investigation also revealed that two compounds, sphaerococcinol A (4) and 14R-hydroxy-13,14-dihydro-sphaerococcinol A (5), were the most potent compounds without toxicity towards oyster larvae used as non-target organisms. These compounds are of high potential as they are active towards key biofoulers and could be produced by a cultivable alga, a fact that is important from the green chemistry point of view.

Nanocoating Is a New Way for Biofouling Prevention

Biofouling is a major concern to the maritime industry. Biofouling increases fuel consumption, accelerates corrosion, clogs membranes and pipes, and reduces the buoyancy of marine installations, such as ships, platforms, and nets. While traditionally marine installations are protected by toxic biocidal coatings, due to recent environmental concerns and legislation, novel nanomaterial-based anti-fouling coatings are being developed. Hybrid nanocomposites of organic-inorganic materials give a possibility to combine the characteristics of both groups of material generating opportunities to prevent biofouling. The development of bio-inspired surface designs, progress in polymer science and advances in nanotechnology is significantly contributing to the development of eco-friendly marine coatings containing photocatalytic nanomaterials. The review mainly discusses photocatalysis, antifouling activity, and formulation of coatings using metal and metal oxide nanomaterials (nanoparticles, nanowires, nanorods). Additionally, applications of nanocomposite coatings for inhibition of micro- and macro-fouling in marine environments are reviewed.

The Presence of Marine Filamentous Fungi on a Copper-Based Antifouling Paint

Marine biofouling is undesirable growth on submerged substances, which causes a major problem for maritime industries. Antifouling paints containing toxic compounds such as copper are used to prevent marine biofouling. However, bacteria and diatoms are usually found in biofilms developed on such paints. In this study, plastic panels painted with a copper-based self-polishing antifouling paint were exposed to biofouling for 6 months in the Marina Bandar Rowdha, Sea of Oman. Clean panels were used as a control substratum. Marine filamentous fungi from protected and unprotected substrate were isolated on a potato dextrose agar. Pure isolates were identified using sequences of the ITS region of rDNA. Six fungal isolates (Alternaria sp., Aspergillus niger, A. terreus, A. tubingensis, Cladosporium halotolerans, and C. omanense) were obtained from the antifouling paint. Four isolates (Aspergillus pseudodeflectus, C. omanense, and Parengyodontium album) were isolated from clean panels and nylon ropes. This is the first evidence of the presence of marine fungi on antifouling paints. In comparison with isolates from the unprotected substrate, fungi from the antifouling paint were highly resistant to copper, which suggests that filamentous fungi can grow on marine antifouling paints.

Synthesis and Biological Activity of Acrylate Copolymers Containing 3-Oxo-N-allyl-1,2-benzisothiazole-3(2H)-carboxamide Monomer as a Marine Antifouling Coating

A type of grafted acrylate copolymer resins, containing 3-oxo-N-allyl-1,2-benzisothiazole-2(3H)-carboxamide monomer and heterocyclic monomers, was synthesized through the copolymeri- zation of methyl methacrylate (MMA) and butyl acrylate (BA) with functional monomers. The structures of the monomers and copolymers were validated by infrared (IR) and 1 H nuclear magnetic resonance (NMR) spectroscopies. The inhibitory activities of the copolymers on algae, bacteria, and barnacle larvae were measured, and the antifouling potencies against marine macrofouling organisms were investigated. The results showed that the grafted resin had significant inhibitory effects on the growth of three marine algae (Isochrysis galbana, Nannochloropsisoculata, and Chlorella pyrenoidosa), and three bacteria (Vibrio coralliilyticus, Staphylococcus aureus,and Vibrio parahaemolyticus). The target copolymers also showed excellent inhibition of the survival of barnacle larvae. Additionally, the release rate of the antifoulant and the results of the marine field tests indicated that the grafted copolymers had outstanding antifouling potency against the attachment of marine macrofouling organisms.

Comparative analysis of two isocyanate-free urethane-based gels for antifouling applications

Amphiphilic gels consisting of acrylamide (AAM)/2-hydroxyethyl methacrylate (HEMA), hexafluorobutyl methacrylate (HFBMA) and non-isocyanate urethane dimethacrylate (NIUDMA) of varying molecular weights were compared. A three-level Taguchi analysis was performed using the amount of AAM/HEMA, HFBMA, NIUDMA and reaction time as dependent variables to determine the optimal formulation of the gels with maximized toughness and elastic modulus. The results were compared with commercial AF/FR Intersleek® coatings (IS 700, IS 900 and IS 1100SR) for their antifouling performance against a marine microalga (Navicula incerta), a marine bacterium (Cellulophaga lytica) and adult barnacles (Amphibalanus amphitrite). The toughness, elastic modulus and strain at break of the optimized AAM gels ranged from 3 to7 MPa, 25 to 72 MPa and 80% to 170%, respectively, whereas those of the optimized HEMA gels ranged from 1 to 3 MPa, 13 to 23 MPa and 76% to 160%, respectively. The gels, particularly AHN(E9) and HHN(E12), showed reductions of attachment compared with IS700 of up to 93% and 58%, respectively.

Antifouling Activity of Meroterpenes Isolated from the Ascidian Aplidium aff. densum

The settlement and growth of fouling organisms on man-made surfaces can be prevented by the application of antifouling paints containing active compounds (biocides, heavy metals), most of which are toxic to non-target organisms. As part of our research program in chemical ecology and blue biotechnology, we are conducting studies to investigate the natural defence mechanisms of marine organisms that are free from epibionts, with the aim of isolating molecules involved in surface defence that could be good candidates as antifouling agents. Ascidians were selected for our investigation because previous studies have shown that they contain abundant and diverse secondary metabolites, which play a defensive role and have been applied to drug discovery. It is therefore relevant to study the role of such secondary metabolites in surface protection. In this study, 5 meroterpenoids (cordiachromene A, didehydroconicol, epiconicol, methoxyconidiol, conidione) from Aplidium aff. densum (ascidian) were investigated as potential antifoulants towards the inhibition of bacterial growth and settlement inhibition of barnacles. Cardiochromene A (IC₅₀ barnacle settlement = 6.04 μg/mL; MIC Gram positive = 125 μg/mL; MIC Gram negative = 32 μg/mL) and epiconicol (IC₅₀ barnacle settlement = 8.05 μg/mL; MIC Bacillus = 63 μg/mL; MIC other strains = 32 μg/mL) were the most promising compounds among those tested in this study.

Tough amphiphilic antifouling coating based on acrylamide, fluoromethacrylate and non-isocyanate urethane dimethacrylate crosslinker

This study is focused on the development of tougher gels using combinations of acrylamide, fluoromethacrylate and a non-isocyanate urethane dimethacrylate (NIUDMA) crosslinker. The NIUDMA was tailored with 2, 3-epoxypropoxy propyl-polydimethylsiloxane segments E9 (MW = 0.36 kg mol^-1), E11 (MW = 0.5-0.6 kg mol^-1) and E12 (MW = 1-1.4 kg mol^-1). A 3 level Taguchi design was used to evaluate the role of each component of the ternary copolymer gel on the elastic modulus and toughness. The toughness ranged from 2.5-7 MJ m^-3 whereas the modulus ranged from 27-70 MPa. The formulations with the highest toughness and modulus were screened for their antifouling potential in biological assays against the microalga Navicula incerta and the bacterium Cellulophaga lytica. The E9 gels showed the best performance, achieving a 73% reduction in N. incerta cells and a 92% reduction in C. lytica biofilm remaining after water jetting treatments, when compared with the commercial Intersleek product IS700.

Antifouling Technology Trends in Marine Environmental Protection

Marine fouling is a worldwide problem, which is harmful to the global marine ecological environment and economic benefits. The traditional antifouling strategy usually uses toxic antifouling agents, which gradually exposes a serious environmental problem. Therefore, green, long-term, broad-spectrum and eco-friendly antifouling technologies have been the main target of engineers and researchers. In recent years, many eco-friendly antifouling technologies with broad application prospects have been developed based on the low toxicity and non-toxicity antifouling agents and materials. In this review, contemporary eco-friendly antifouling technologies and materials are summarized into bionic antifouling and non-bionic antifouling strategies (2000-2020). Non-bionic antifouling technologies mainly include protein resistant polymers, antifoulant releasing coatings, foul release coatings, conductive antifouling coatings and photodynamic antifouling technology. Bionic antifouling technologies mainly include the simulated shark skin, whale skin, dolphin skin, coral tentacles, lotus leaves and other biology structures. Brief future research directions and challenges are also discussed in the end, and we expect that this review would boost the development of marine antifouling technologies.

Bio-inspired Surface Texture Modification as a Viable Feature of Future Aquatic Antifouling Strategies: A Review

The imitation of natural systems to produce effective antifouling materials is often referred to as “biomimetics”. The world of biomimetics is a multidisciplinary one, needing careful understanding of “biological structures”, processes and principles of various organisms found in nature and based on this, designing nanodevices and nanomaterials that are of commercial interest to industry. Looking to the marine environment for bioinspired surfaces offers researchers a wealth of topographies to explore. Particular attention has been given to the evaluation of textures based on marine organisms tested in either the laboratory or the field. The findings of the review relate to the numbers of studies on textured surfaces demonstrating antifouling potential which are significant. However, many of these are only tested in the laboratory, where it is acknowledged a very different response to fouling is observed.

Love at First Taste: Induction of Larval Settlement by Marine Microbes

Marine biofilms are composed of many species of bacteria, unicellular algae, and protozoa. Biofilms can induce, inhibit, or have no effect on settlement of larvae and spores of algae. In this review, we focus on induction of larval settlement by marine bacteria and unicellular eukaryotes and review publications from 2010 to September 2019. This review provides insights from meta-analysis on what is known about the effect of marine biofilms on larval settlement. Of great interest is the impact of different components of marine biofilms, such as bacteria and diatoms, extracellular polymeric substances, quorum sensing signals, unique inductive compounds, exoenzymes, and structural protein degradation products on larval settlement and metamorphosis. Molecular aspects of larval settlement and impact of climate change are reviewed and, finally, potential areas of future investigations are provided.

Progress in biomimetic leverages for marine antifouling using nanocomposite coatings

Because of the environmental and economic casualties of biofouling on maritime navigation, modern studies have been devoted toward formulating advanced nanoscale composites in the controlled development of effective marine antifouling self-cleaning surfaces.

The Sponge-Associated Fungus Eurotium chevalieri MUT 2316 and its Bioactive Molecules: Potential Applications in the Field of Antifouling

The need for new environmentally friendly antifouling and the observation that many marine organisms have developed strategies to keep their surface free of epibionts has stimulated the search for marine natural compounds with antifouling activities. Sponges and in particular fungi associated with them represent one of the most appropriate sources of defence molecules and could represent a promising biomass for the supply of new antifouling compounds. The objective of this work was therefore to evaluate the antifouling potency of 7 compounds isolated from the sponge derived fungus Eurotium chevalieri MUT 2316. The assessment of their activity targeted the inhibition of the adhesion and/or growth of selected marine bacteria (5) and microalgae (5), as well as the inhibition of the mussel's byssus thread formation (tyrosinase activity). The 7 compounds showed bioactivity, with various levels of selectivity for species. Cyclo-L-Trp-L-Ala was the most promising active compound, and led to the inhibition, at very low concentrations (0.001 μg ml^-1 in 61.5% of cases), of adhesion and growth of all the microalgae, of selected bacteria, and towards the inhibition of tyrosinase. Promising results were also obtained for echinulin, neoechinulin A, dihydroauroglaucin and flavoglaucin, respectively, leading to inhibition of adhesion and/or growth of 9, 7, 8 and 8 microfouling species at various concentrations.

Biomimetic Approaches for the Development of New Antifouling Solutions: Study of Incorporation of Macroalgae and Sponge Extracts for the Development of New Environmentally-Friendly Coatings

Biofouling causes major economic losses in the maritime industry. In our site study, the Bay of La Paz (Gulf of California), biofouling on immersed structures is a major problem and is treated mostly with copper-based antifouling paints. Due to the known environmental effect of such treatments, the search for environmentally friendly alternatives in this zone of high biodiversity is a priority to ensure the conservation and protection of species. The aim of this work was to link chemical ecology to marine biotechnology: indeed, the natural defense of macroalgae and sponge was evaluated against biofoulers (biofilm and macrofoulers) from the same geographical zone, and some coatings formulation was done for field assays. Our approach combines in vitro and field bioassays to ensure the selection of the best AF agent prospects. The 1st step consisted of the selection of macroalgae (5 species) and sponges (2 species) with surfaces harboring a low level of colonizers; then extracts were prepared and assayed for toxicity against Artemia, activity towards key marine bacteria involved in biofilm formation in the Bay of La Paz, and the potency to inhibit adhesion of macroorganisms (phenoloxidase assays). The most active and non-toxic extracts were further studied for biofouling activity in the adhesion of the bacteria involved in biofilm formation and through incorporation in marine coatings which were immersed in La Paz Bay during 40 days. In vitro assays demonstrated that extracts of Laurencia gardneri, Sargassum horridum (macroalgae), Haliclona caerulea and Ircinia sp. (sponges) were the most promising. The field test results were of high interest as the best formulation were composed of extracts of H. caerulea and S. horridum and led to a reduction of 32% of biofouling compared with the control.

Biofilm formation in marine bacteria and biocidal sensitivity: interplay between a potent antibiofilm compound (AS162) and quorum-sensing autoinducers

The capacity of two homoserine lactones to stimulate the marine bacteria Pseudoalteromonas ulvae (TC14 strain) for its capacity to form a biofilm when exposed to a potent antibiofilm compound AS162 is reported. Effective concentrations (EC₅₀) of AS162 at 24 h, 48 h, and 72 h were, respectively, of 4.3, 4.4, and 6.0 µM. When tested in combination with HSLs, results showed that quorum-sensing signal molecules 3-oxo-C6 and 3-oxo-C8 homoserine lactones do not act directly on the biofilm formation, but are able to interfere positively with AS162 to promote biofilm growth with EC₅₀ ranging from 30 to 50 µM. The same results were obtained with two other marine bacterial strains: Pseudoalteromonas lipolytica TC8 and Paracoccus sp. 4M6. These findings suggest that HSLs can significantly affect the biocidal sensitivity of marine bacteria to antifouling agents.

Natural and non-toxic products from Fabaceae Brazilian plants as a replacement for traditional antifouling biocides: an inhibition potential against initial biofouling

In this study, we screened for the antifouling activity of 15 species plant extracts from Brazilian the Brazilian Caatinga Fabaceae against the initial colonization of natural marine bacterial biofilm. We also investigated the potential toxicity of extracts against planktonic and benthic non-target organisms. Aqueous extracts of plants collected in the Caatinga biome (PE, Brazil) were prepared and tested at different concentration levels (0, 0.5, 1, 2, 4, and 8 mg mL^-1). Natural marine bacterial consortium was inoculated in multi-well plates and incubated with the different treatments for 48 h. The biofilm and planktonic bacterial density and biomass inhibition were evaluated along with biofilm biomass eradication. The extracts that showed the highest bacterial biofilm inhibition were evaluated for toxicity against microalgae and crustaceans. The biofilm and planktonic bacterial inhibition potential were evaluated through flow cytometry and spectrophotometry. The selected treatments were evaluated for their toxicity using the microalgae Chaetoceros calcitrans, the copepod Nitokra sp., and the brine shrimp Artemia salina as bioindicators. Our work demonstrates the biotechnological potential of Fabaceae plant compounds as a safe antifouling alternative. Anadenanthera colubrina var. cebil fruits and Apuleia leiocarpa leaf extracts showed antibiofilm activity (≥ 80%), while Myroxylon peruiferum and Dioclea grandiflora leaf extracts showed antibiotic activity. These extracts were safe to planktonic and benthic non-target organisms. The results of this study point to potential substitutes to highly toxic antifouling paints and shed light on the prospect of a yet to be explored biome for more sustainable alternatives in biofouling research.

From Ecology to Biotechnology, Study of the Defense Strategies of Algae and Halophytes (from Trapani Saltworks, NW Sicily) with a Focus on Antioxidants and Antimicrobial Properties

This study aimed at the characterization of the antioxidant power of polyphenol extracts (PE) obtained from the algae Cystoseira foeniculacea (CYS) (Phaeophyta) and from the halophyte Halocnemum strobilaceum (HAL), growing in the solar saltworks of western Sicily (Italy), and at the evaluation of their anti-microfouling properties, in order to correlate these activities to defense strategies in extreme environmental conditions. The antioxidant properties were assessed in the PE based on the total antioxidant activity test and the reducing power test; the anti-microfouling properties of the two PE were evaluated by measuring the growth inhibition of marine fish and shellfish pathogen bacteria as well as marine surface fouling bacteria and microalgae exposed to the fractions. Similar polyphenol content (CYS 5.88 ± 0.75 and HAL 6.03 ± 0.25 mg gallic acid equivalents (GAE) g-1 dried weight, DW) and similar reducing power percentage (93.91 ± 4.34 and 90.03 ± 6.19) were recorded for both species, even if they exhibited a different total antioxidant power (measured by the percentage of inhibition of the radical 2,2 diphenyl-1-picrylhydrazyl DPPH), with CYS (79.30) more active than HAL (59.90). Both PE showed anti-microfouling properties, being inhibitors of adhesion and growth of marine fish and shellfish pathogen bacteria (V. aestuarianus, V. carchariae, V. harveyi, P. elyakovii, H. aquamarina) and fouling bacteria (V. natriegens, V. proteolyticus, P. iirgensii, R. litoralis) with minimum inhibitory concentrations comparable to the commercial antifouling products used as a positive control (SEA-NINE™ 211N). Only CYS was a significant inhibitor of the microalgae strains tested, being able to reduce E. gayraliae and C. closterium growth (MIC 10 µg·mL-1) and the adhesion of all three strains tested (E. gayraliae, C. closterium and P. purpureum), suggesting its promise for use as an antifouling (AF) product.

Dynamic surface antifouling: mechanism and systems

Marine biofouling is a global problem today. High efficiency and eco-friendly antifouling systems are in pressing need. In recent years, we have proposed the concept of dynamic surface antifouling (DSA). That is, a continuously changing surface can effectively prevent marine fouling organisms from landing and adhesion. Based on this strategy, we developed coatings with dynamic surfaces by using degradable polymers including polyester-polyurethane, modified polyester and poly(ester-co-acrylate). They exhibit tunable renewability, and excellent antifouling and mechanical performance. Moreover, the polymers can serve as carrier and controlled release systems of antifoulants so that they have long service life. This paper reviews the progress and trends in marine anti-biofouling, and presents the mechanism and systems of DSA.

Oxidation-Mediated, Zwitterionic Polydopamine Coatings for Marine Antifouling Applications

We synthesized a zwitterionic dopamine derivative ( ZW-DOPA) containing both catechol and amine groups, and we demonstrated an excellent marine antifouling surface by controlling the oxidation of ZW-DOPA. The oxidation was mediated by the deprotonation of catechol or the addition of an oxidant (ammonium persulfate (AP) or sodium periodate (NaIO₄)). The oxidation and subsequent molecular transformation of ZW-DOPA was investigated over time by UV-vis spectroscopy. Among the different oxidation conditions tested, NaIO₄-induced ZW-DOPA coating was the most efficient and successfully formed on various substrates, such as titanium dioxide, stainless steel, and nylon. Compared with uncoated substrates, ZW-DOPA-coated substrates showed high resistance to marine diatom adhesion. Considering the ease of use and substrate independence of the ZW-DOPA coating, this method shows promise as a basis for inhibiting marine fouling on a variety of substrates used in the marine industry and aquatic environments.

The Plant Alkaloid Camptothecin as a Novel Antifouling Compound for Marine Paints: Laboratory Bioassays and Field Trials

The extensive use of copper and booster biocides in antifouling (AF) paints has raised environmental concerns and the need to develop new AF agents. In the present study, 18 alkaloids derived from terrestrial plants were initially evaluated for AF activity using laboratory bioassays with the bryozoan Bugula neritina and the barnacle Balanus albicostatus. The results showed that 4 of the 18 alkaloids were effective in inhibiting larval settlement of B. neritina, with an EC₅₀ range of 6.18 to 43.11 μM, and 15 of the 18 alkaloids inhibited larval settlement of B. albicostatus, with EC₅₀ values ranging from 1.18 to 67.58 μM. Field trials that incorporated five alkaloids respectively into paints with 20% w/w indicated an in situ AF efficiency of evodiamine, strychnine, camptothecin (CPT), and cepharanthine, with the most potent compound being CPT, which also exhibited stronger AF efficiency than the commercial antifoulants cuprous oxide and zinc pyrithione in the field over a period of 12 months. Further field trials with different CPT concentrations (0.1 to 20% w/w) in the paints suggested a concentration-dependent AF performance in the natural environment, and the effective concentrations to significantly inhibit settlement of biofoulers in the field were ≥ 0.5% w/w (the efficiency of 0.5% w/w lasted for 2 months). Moreover, CPT toxicity against the crustacean Artemia salina, the planktonic microalgae Phaeodactylum tricornutum and Isochrysis galbana, was examined. The results showed that 24 h LC₅₀ of CPT against A. salina was 20.75 μM, and 96 h EC₅₀ (growth inhibition) values of CPT to P. tricornutum and I. galbana were 55.81 and 6.29 μM, respectively, indicating that CPT was comparatively less toxic than several commercial antifoulants previously reported. Our results suggest the novel potential application of CPT as an antifoulant.

A comparison of the antifouling performance of air plasma spray (APS) ceramic and high velocity oxygen fuel (HVOF) coatings for use in marine hydraulic applications

Maritime hydraulic components are often exposed to harsh environmental conditions which can lead to accelerated deterioration, reduced function, equipment failure and costly repair. Two leading causes of maritime hydraulic failure are biofouling accumulation and corrosion. This study examined the antifouling performance of three candidate replacement high velocity oxygen fuel (HVOF) coatings relative to the performance of the current baseline air plasma spray (APS) ceramic coating for protection of hydraulic actuators. Following 20 weeks immersion at tropical and temperate field exposure sites, the control APS ceramic accumulated significantly greater levels of biofouling compared to the HVOF coatings. More specifically, the magnitude of growth of real-world nuisance hard fouling observed on in-service hydraulic components (eg calcareous tubeworms and encrusting bryozoans) was significantly greater on the APS ceramic relative to HVOF coatings. Possible explanations for the observed patterns include differences in surface topography and roughness, the electrochemical potential of the surfaces and the colour/brightness of the coatings.

Total synthesis and biological activity of dolastatin 16

The total synthesis of dolastatin 16, a macrocyclic depsipeptide first isolated from the sea hare Dolabella auricularia as a potential antineoplastic metabolite by Pettit et al., was achieved in a convergent manner. Dolastatin 16 was reported by Tan to exhibit strong antifouling activity, and thus shows promise for inhibiting the attachment of marine benthic organisms such as Amphibalanus amphitrite to ships and submerged artificial structures. Therefore, dolastatin 16 is a potential compound for a new, environmentally friendly antifouling material to replace banned tributyltin-based antifouling paints. The synthesis of dolastatin 16 involved the use of prolinol to prevent formation of a diketopiperazine composed of l-proline and N-methyl-d-valine during peptide coupling. This strategy for the elongation of peptide chains allowed the efficient and scalable synthesis of one segment, which was subsequently coupled with a second segment and cyclized to form the macrocyclic framework of dolastatin 16. The synthetic dolastatin 16 exhibited potent antifouling activity similar to that of natural dolastatin 16 toward cypris larvae of Amphibalanus amphitrite.

Minireview: algal natural compounds and extracts as antifoulants

Marine biofouling is a paramount phenomenon in the marine environment and causes serious problems to maritime industries worldwide. Marine algae are known to produce a wide variety of chemical compounds with antibacterial, antifungal, antialgal, and anti-macrofouling properties, inhibiting the settlement and growth of other marine fouling organisms. Significant investigations and progress have been made in this field in the last two decades and several antifouling extracts and compounds have been isolated from micro- and macroalgae. In this minireview, we have summarized and evaluated antifouling compounds isolated and identified from macroalgae and microalgae between January 2010 and June 2016. Future directions for their commercialization through metabolic engineering and industrial scale up have been discussed. Upon comparing biogeographical regions, investigations from Southeast Asian waters were found to be rather scarce. Thus, we have also discussed the need to conduct more chemical ecology based research in relatively less explored areas with high algal biodiversity like Southeast Asia.

Antifouling Compounds from Marine Invertebrates

In this review, a comprehensive overview about the antifouling compounds from marine invertebrates is described. In total, more than 198 antifouling compounds have been obtained from marine invertebrates, specifically, sponges, gorgonian and soft corals.

Mini-Review: Antifouling Natural Products from Marine Microorganisms and Their Synthetic Analogs

Biofouling causes huge economic loss and generates serious ecological issues worldwide. Marine coatings incorporated with antifouling (AF) compounds are the most common practices to prevent biofouling. With a ban of organotins and an increase in the restrictions regarding the use of other AF alternatives, exploring effective and environmentally friendly AF compounds has become an urgent demand for marine coating industries. Marine microorganisms, which have the largest biodiversity, represent a rich and important source of bioactive compounds and have many medical and industrial applications. This review summarizes 89 natural products from marine microorganisms and 13 of their synthetic analogs with AF EC50 values ≤ 25 μg/mL from 1995 (the first report about marine microorganism-derived AF compounds) to April 2017. Some compounds with the EC50 values < 5 μg/mL and LC50/EC50 ratios > 50 are highlighted as potential AF compounds, and the preliminary analysis of structure-relationship (SAR) of these compounds is also discussed briefly. In the last part, current challenges and future research perspectives are proposed based on opinions from many previous reviews. To provide clear guidance for the readers, the AF compounds from microorganisms and their synthetic analogs in this review are categorized into ten types, including fatty acids, lactones, terpenes, steroids, benzenoids, phenyl ethers, polyketides, alkaloids, nucleosides and peptides. In addition to the major AF compounds which targets macro-foulers, this review also includes compounds with antibiofilm activity since micro-foulers also contribute significantly to the biofouling communities.

Design, Synthesis, and Antifouling Activity of Glucosamine-Based Isocyanides

Biofouling, an undesirable accumulation of organisms on sea-immersed structures such as ship hulls and fishing nets, is a serious economic issue whose effects include oil wastage and clogged nets. Organotin compounds were utilized since the 1960s as an antifouling material; however, the use of such compounds was later banned by the International Maritime Organization (IMO) due to their high toxicity toward marine organisms, resulting in masculinization and imposex. Since the ban, there have been extensive efforts to develop environmentally benign antifoulants. Natural antifouling products obtained from marine creatures have been the subject of considerable attention due to their potent antifouling activity and low toxicity. These antifouling compounds often contain isocyano groups, which are well known to have natural antifouling properties. On the basis of our previous total synthesis of natural isocyanoterpenoids, we envisaged the installation of an isocyano functional group onto glucosamine to produce an environmentally friendly antifouling material. This paper describes an effective synthetic method for various glucosamine-based isocyanides and evaluation of their antifouling activity and toxicity against cypris larvae of the barnacle Amphibalanus amphitrite. Glucosamine isocyanides with an ether functionality at the anomeric position exhibited potent antifouling activity, with EC₅₀ values below 1 μg/mL, without detectable toxicity even at a high concentration of 10 μg/mL. Two isocyanides had EC₅₀ values of 0.23 and 0.25 μg/mL, comparable to that of CuSO₄, which is used as a fouling inhibitor (EC₅₀ = 0.27 μg/mL).

Screening of bromotyramine analogues as antifouling compounds against marine bacteria

Rapid and efficient synthesis of 23 analogues inspired by bromotyramine derivatives, marine natural products, by means of CuSO4-catalysed [3+2] alkyne-azide cycloaddition is described. The final target was then assayed for anti-biofilm activity against three Gram-negative marine bacteria, Pseudoalteromonas ulvae (TC14), Pseudoalteromonas lipolytica (TC8) and Paracoccus sp. (4M6). Most of the synthesised bromotyramine/triazole derivatives are more active than the parent natural products Moloka'iamine (A) and 3,5-dibromo-4-methoxy-β-phenethylamine (B) against biofilm formation by the three bacterial strains. Some of these compounds were shown to act as non-toxic inhibitors of biofilm development with EC50 < 200 μM without any effect on bacterial growth even at high concentrations (200 μM).

A new diatom growth inhibition assay using the XTT colorimetric method

Marine biofouling, which leads to significant operational stress and economic damage on marine infrastructures, is a major problem in marine related industries. Currently, the most common way to avoid marine biofouling involves the use of biocidal products in surface coatings. However, the need for environmentally friendly antibiofouling compounds has increased rapidly with the recent global prohibition of harmful antifoulants, such as tributyltin (TBT). In particular, periphytic diatoms have been shown to contribute significantly to biofilms, which play an important role in biofouling. Therefore, inhibiting the proliferation of fouling diatoms is a very important step in the prevention of marine biofouling. In this study, we developed a new, rapid, accurate, and convenient growth inhibition assay using the XTT colorimetric method to prevent the growth of the fouling periphytic diatom, Nitzschia amabilis Hidek. Suzuki (replaced synonym, Nitzschia laevis Hustedt). The feasibility of this method was verified by determining the growth inhibition activities of two standard photosynthetic inhibitors, DCMU and CuSO4. However, neither inhibitor had any cytotoxic activities at the range of concentrations tested. Moreover, this method was applied by screening and purification of herbicidic but non-cytotoxic compounds from cyanobacteria extracts. Our results demonstrate the utility of this newly established growth inhibition assay for the identification of marine anti-biofouling compounds.

RAFT polymerization of bromotyramine-based 4-acryloyl-1,2,3-triazole: a functional monomer and polymer family through click chemistry

A series of bromotyramine-based 4-acryloyl-1,2,3-triazole monomers and polymers using click chemistry and RAFT polymerization.

Self-decontaminating photocatalytic zinc oxide nanorod coatings for prevention of marine microfouling: a mesocosm study

The antifouling (AF) properties of zinc oxide (ZnO) nanorod coated glass substrata were investigated in an out-door mesocosm experiment under natural sunlight (14:10 light: dark photoperiod) over a period of five days. The total bacterial density (a six-fold reduction) and viability (a three-fold reduction) was significantly reduced by nanocoatings in the presence of sunlight. In the absence of sunlight, coated and control substrata were colonized equally by bacteria. MiSeq Illumina sequencing of 16S rRNA genes revealed distinct bacterial communities on the nanocoated and control substrata in the presence and absence of light. Diatom communities also varied on nanocoated substrata in the presence and the absence of light. The observed AF activity of the ZnO nanocoatings is attributed to the formation of reactive oxygen species (ROS) through photocatalysis in the presence of sunlight. These nanocoatings are a significant step towards the production of an environmentally friendly AF coating that utilizes a sustainable supply of sunlight.

Modification of Silicone Elastomer Surfaces with Zwitterionic Polymers: Short-Term Fouling Resistance and Triggered Biofouling Release

We present a method for dual-mode-management of biofouling by modifying surface of silicone elastomers with zwitterionic polymeric grafts. Poly(sulfobetaine methacrylate) was grafted from poly(vinylmethylsiloxane) elastomer substrates using thiol-ene click chemistry and surface-initiated, controlled radical polymerization. These surfaces exhibited both fouling resistance and triggered fouling-release functionality. The zwitterionic polymers exhibited fouling resistance over short-term (∼hours) exposure to bacteria and barnacle cyprids. The biofilms that eventually accumulated over prolonged-exposure (∼days) were easily detached by applying mechanical strain to the elastomer substrate. Such dual-functional surfaces may be useful in developing environmentally and biologically friendly coatings for biofouling management on marine, industrial, and biomedical equipment because they can obviate the use of toxic compounds.

Non-toxic, non-biocide-release antifouling coatings based on molecular structure design for marine applications

Antifouling (AF) coatings bring economic benefits but raise environmental and health concerns. Non-toxic, non-biocide-release AF strategies are reviewed according to “detachment of biofoulants” and “prevention of attachment” approaches. Chemical and physical aspects of AF mechanisms and new amphiphilic, superhydrophilic and topographic AF strategies are discussed.

Mini-review: marine natural products and their synthetic analogs as antifouling compounds: 2009-2014

This review covers 214 marine natural compounds and 23 of their synthetic analogs, which were discovered and/or synthesized from mid-2009 to August 2014. The antifouling (AF) compounds reported have medium to high bioactivity (with a threshold of EC(50) < 15.0 mg ml(-1)). Among these compounds, 82 natural compounds were identified as new structures. All the compounds are marine-derived, demonstrating that marine organisms are prolific and promising sources of natural products that may be developed as environmentally friendly antifoulants. However, this mini-review excludes more than 200 compounds that were also reported as AF compounds but with rather weak bioactivity during the same period. Also excluded are terrestrial-derived AF compounds reported during the last five years. A brief discussion on current challenges in AF compound research is also provided to reflect the authors' own views in terms of future research directions.