Risks of using antifouling biocides in aquaculture

Exposure to Trimethyltin Chloride Induces Pyroptosis and Immune Dysfunction in Grass Carp CIK Cells by Activating the NF-κB Pathway Through Oxidative Stress

Trimethyltin chloride (TMT) is a highly toxic organotin pollutant frequently found in aquatic environments, posing a significant threat to the ecological system. The kidney plays a vital role in the body's detoxification processes, and TMT present in the environment tends to accumulate in the kidneys. However, it remained unclear whether exposure to different doses of TMT could induce pyroptosis and immune dysfunction in grass carp kidney cells (CIK cells). For this purpose, after assessing the half-maximal inhibitory concentration (IC50) of TMT on CIK cells, we established a model for exposure of CIK cells at varying concentrations of TMT. CIK cells were treated with various doses of TMT (2.5, 5, 10 μM) for 24 h. Oxidative stress levels were measured using kits and fluorescence methods, whereas the expression of related genes was verified through western blot and quantitative real-time PCR (qRT-PCR). The results indicated that TMT exposure led to oxidative stress, with increased levels of ROS, H2O2, MDA, and GSH, and inhibited activities of T-AOC, SOD, and CAT. It activated the NF-κB pathway, leading to the upregulation of NF-κB p65, NF-κB p50, GSDMD, NLRP3, ASC, and Caspase-1. Furthermore, TMT exposure also resulted in increased expression of cytokines (IL-18, IL-6, IL-2, IL-1β, and TNF-α) and decreased expression of antimicrobial peptides (LEAP2, HEPC, and β-defensin). In summary, exposure to TMT induces dose-dependent oxidative stress that activates the NF-κB pathway, leading to pyroptosis and immune dysfunction in grass carp CIK cells.

Antifouling activities of proteinase K and α-amylase enzymes: Laboratory bioassays and in silico analysis

The application of enzymes as antifoulants is one of the environment-friendly strategies in biofouling management. In this study, antifouling activities of commercially available proteinase K and α-amylase enzymes were evaluated using barnacle larva and biofilm-forming bacteria as test organisms. The enzymes were also tested against barnacle cement protein through in silico analysis. The results showed that both enzymes inhibited the attachment of bacteria and settlement of barnacle larvae on the test surface. The lowest minimum inhibitory concentration of 0.312 mg ml-1 was exhibited by proteinase K against biofilm-forming bacteria. The calculated LC50 values for proteinase K and α-amylase against the barnacle nauplii were 91.8 and 230.96 mg ml-1 respectively. While α-amylase showed higher antibiofilm activity, proteinase K exhibited higher anti-larval settlement activity. Similarly, in silico analysis of the enzymes revealed promising anti-settlement activity, as the enzymes showed good binding scores with barnacle cement protein. Overall, the results suggested that the enzymes proteinase K and α-amylase could be used in antifouling coatings to reduce the settlement of biofouling on artificial materials in the marine environment.

Novel technique for the ultra-sensitive detection of hazardous contaminants using an innovative sensor integrated with a bioreactor

This study introduces an evaluation methodology tailored for bioreactors, with the aim of assessing the stress experienced by algae due to harmful contaminants released from antifouling (AF) paints. We present an online monitoring system equipped with an ultra-sensitive sensor that conducts non-invasive measurements of algal culture's optical density and physiological stage through chlorophyll fluorescence signals. By coupling the ultra-sensitive sensor with flash-induced chlorophyll fluorescence, we examined the dynamic fluorescence changes in the green microalga Chlamydomonas reinhardtii when exposed to biocides. Over a 24-h observation period, increasing concentrations of biocides led to a decrease in photosynthetic activity. Notably, a substantial reduction in the maximum quantum yield of primary photochemistry (FV/FM) was observed within the first hour of exposure. Subsequently, we detected a partial recovery in FV/FM; however, this recovery remained 50% lower than that of the controls. Integrating the advanced submersible sensor with fluorescence decay kinetics offered a comprehensive perspective on the dynamic alterations in algal cells under the exposure to biocides released from antifouling coatings. The analysis of fluorescence relaxation kinetics revealed a significant shortening of the fast and middle phases,  along with an increase in the duration of the slow phase, for the coating with the highest levels of biocides. Combining automated culturing and measuring methods, this approach has demonstrated its effectiveness as an ultrasensitive and non-invasive tool for monitoring the physiology of photosynthetic cultures. This is particularly valuable in the context of studying microalgae and their early responses to various environmental conditions, as well as the potential to develop an AF system with minimal harm to the environment.

Environmental occurrence, biological effects, and health implications of zinc pyrithione: A review

Due to the detrimental effects on aquatic organisms and ecosystem, tributyltin as a antifouling agent have been banned worldwide since 1990s. As a replacement for tributyltin, zinc pyrithione (ZnPT) has emerged as a new environmentally friendly antifouling agent. However, the widespread use of ZnPT unavoidably leads to the occurrence and accumulation in aquatic environments, especially in waters with limited sunlight. Despite empirical evidence demonstrating the ecotoxicity and health risks of ZnPT to different organisms, there has been no attempt to compile and interpret this data. The present review revealed that over the past 50 years, numerous studies have documented the toxicity of ZnPT in various organisms, both in vitro and in vivo. However, long-term effects and underlying mechanisms of ZnPT on biota, particularly at environmentally realistic exposure levels, remain largely unexplored. In-depth studies are thus necessary to generate detailed ecotoxicological information of ZnPT for environmental risk assessment and management.

Hull-cleaning wastewater poses serious acute and chronic toxicity to a marine mysid-A multigenerational study

We conducted a comprehensive assessment involving acute effects on 96-hour survival and biochemical parameters, as well as chronic effects on growth and reproduction spanning three generations of the marine mysid Neomysis awatschensis exposed to filtered wastewater to evaluate the potential impact of ship hull-cleaning wastewater on crustaceans. The analyzed wastewater exhibited elevated concentrations of metals, specifically zinc (Zn) and copper (Cu) and metal-based antifoulants, i.e., Cu pyrithoine (CuPT) and Zn pyrithoine (ZnPT). The results revealed dose-dependent reductions in survival rates, accompanied by a notable increase in oxidative stress, in response to the sublethal values of two wastewater samples: 1) mechanically filtered using the cleaning system (MF) and 2) additionally filtered in the laboratory (LF) for 96 h. Mysids exposed to MF displayed higher mortality than those exposed to LF. Furthermore, mysids subjected to continuous exposure of 0.001% LF across three generations exhibited significant inhibition of the feeding rate, more pronounced growth retardation along with an extended intermolt duration, and a diminished rate of reproduction compared to the control. A noteworthy inhibition of the feeding rate and growth was observed in the first generation exposed only to the LF sample. However, although the reproduction rate was not significantly affected. Collectively, these findings underscore the potential harm posed by sublethal concentrations of wastewater to the health of mysid populations under consistent exposure.

Scientific Investigation of Antifouling Activity from Biological Agents and Distribution of Marine Foulers-Coastal Areas of Tamil Nadu

Biofouling is the result of a biological process that is the accumulation of micro- and macro-organisms on the surfaces of the ship which causes serious environmental problems. The consequence of biofouling includes modifying the hydrodynamic response, affecting heat exchange, can make structures heavier, accelerate or generating corrosion, biodegradation, increasing the fatigue of certain materials, and blocking mechanical functions. It causes severe problems for the objects in the water such as ships and buoys. Also, its impact on shellfish and other aquaculture was sometimes devastating. The main scope of this study is to review the currently available biocides from biological agents for marine submerged foulants and marine foulers that are present around the coastal areas of Tamil Nadu. Biological anti-fouling methods are preferred than that of the chemical and physical anti-fouling methods as it have some toxic effects on the non targeted marine biodiversity. This study focuses on the marine foulers that are present around the coastal areas of Tamil Nadu which will be helpful for the researchers to discover the suitable anti-foulers from a biological source, which will be very useful to protect the marine ecosystem and marine economy. A total of 182 antifouling compounds from marine biological sources were discovered. The marine microbes, Penicillium sp. and Pseudoalteromonas issachenkonii, were reported to possess EC50. The survey results obtained from this study show that Chennai coastal region has a lot of barnacles, and 8 different species were present in Pondicherry region.

Active soil microbial composition and proliferation are directly affected by the presence of biocides from building materials

Combinations of biocides are commonly added to building materials to prevent microbial growth and thereby cause degradation of the façades. These biocides reach the environment by leaching from façades posing an environmental risk. Although ecotoxicity to the aquatic habitat is well established, there is hardly any data on the ecotoxicological effects of biocides on the soil habitat. This study aimed to characterize the effect of the biocides terbutryn, isoproturon, octhilinone, and combinations thereof on the total and metabolically active soil microbial community composition and functions. Total soil microbial community was retrieved directly from the nucleic acid extracts, while the DNA of the active soil microbial community was separated after bromodeoxyuridine labeling. Bacterial 16S rRNA gene and fungal internal transcribed spacer region gene-based amplicon sequencing was carried out for both active and total, while gene copy numbers were quantified only for the total soil microbial community. Additionally, soil respiration and physico-chemical parameters were analyzed to investigate overall soil microbial activity. The bacterial and fungal gene copy numbers were significantly affected by single biocides and combined biocide soil treatment but not soil respiration and physico-chemical parameters. While the total soil microbiome experienced only minor effects from single and combined biocide treatment, the active soil microbiome was significantly impacted in its diversity, richness, composition, and functional patterns. The active bacterial richness was more sensitive than fungal richness. However, the adverse effects of the biocide combination treatments on soil bacterial richness were highly dependent on the identities of the biocide combination. Our results demonstrate that the presence of biocides frequently used in building materials affects the active soil microbiome. Thereby, the approach described herein can be used as an ecotoxicological measure for the effect on complex soil environments in future studies.

Assessing the spatiotemporal occurrence and ecological risk of antifouling biocides in a Brazilian estuary

Diuron and Irgarol are common antifouling biocides used in paints to prevent the attachment and growth of fouling organisms on ship hulls and other submerged structures. Concerns about their toxicity to non-target aquatic organisms have led to various restrictions on their use in antifouling paints worldwide. Previous studies have shown the widespread presence of these substances in port areas along the Brazilian coast, with a concentration primarily in the southern part of the country. In this study, we conducted six sampling campaigns over the course of 1 year to assess the presence and associated risks of Diuron and Irgarol in water collected from areas under the influence of the Maranhão Port Complex in the Brazilian Northeast. Our results revealed the absence of Irgarol in the study area, irrespective of the sampling season and site. In contrast, the mean concentrations of Diuron varied between 2.0 ng L-1 and 34.1 ng L-1 and were detected at least once at each sampling site. We conducted a risk assessment of Diuron levels in this area using the risk quotient (RQ) method. Our findings indicated that Diuron levels at all sampling sites during at least one campaign yielded an RQ greater than 1, with a maximum of 22.7, classifying the risk as "high" based on the proposed risk classification. This study underscores the continued concern regarding the presence of antifouling biocides in significant ports and marinas in Brazilian ports, despite international bans.

Eluates from façades at the beginning of their service time affect aquatic and sediment organisms

Biocides are used in building materials to prevent microbial growth during storage (in-can preservatives) as well as after application (film preservatives). These compounds can leach out from the material into the environment and harm non-target organisms. In this study, the ecotoxicological effect of leachates at the beginning of a façade lifetime, on sediment and aquatic organisms was examined. For this purpose, leaching tests were carried out in the setting of a natural weathering experiment and a laboratory immersion with façade samples consisting of render/paint systems. The leaching experiments were performed with three different formulations, namely no biocides containing control, a formulation containing only in-can preservatives (benzisothiazolinone (BIT), methylchloroisothiazolinone (CMIT), and methylisothiazolinone (MIT)), and, as is common in organic building materials, containing both in-can and film preservatives (octylisothiazolinone (OIT) and terbutryn (TB)). In order to elucidate the effects of in-can and film preservative-containing eluates the toxicity of the generated leachables was evaluated on the model of several aquatic and sediment organisms, namely luminescent bacteria (Vibrio fischeri), green algae (Scenedesmus subspicatus), Salmonella typhimurium TA1535/pSK1002 (umu-test), fish-egg (Danio rerio), Chironomus riparius, and Lumbriculus variegatus. It was demonstrated that in-can preservatives leach out rapidly at the beginning of a façade lifetime and despite the short half-life of these compounds in aqueous solutions, they could be detected at high concentrations in the eluates. Furthermore, eluates from early sampling times, predominantly containing in-can preservatives, were found to cause toxic effects on sediment and aquatic organisms. The results demonstrate that in-can preservatives can impose a significant stress factor on the environment.

How do biocidals affect the non-target marine organisms: the short-term effects of antifouling agent sodium pyrithione on Mediterranean mussels (Mytilus galloprovincialis, Lamark 1819)

The metallic pyrithiones are used as antifouling paints for marine vehicles against fouling organisms. However, they are dissolved in marine water and have negative impacts on marine non-target organisms. This study evaluated the adverse effects of sodium pyrithione (NaPT) on Mytilus galloprovincialis using total hemocyte counts (THCs), oxidative stress and antioxidant parameters, and histopathological observations. Mussels were exposed to 0.1 and 1 μg/L NaPT for 96 h. The THC values of the NaPT-exposed mussels significantly decreased (p < 0.05). Lipid peroxidation and advanced oxidative protein products of digestive gland and gill tissues were decreased but only the digestive gland tissues of 0.1 μg/L NaPT values were significantly decreased compared to control groups (p < 0.05). Histological alterations were observed in the gill and the digestive gland tissues revealing malformations and hyperplasia of gill lamella; degenerations and loss of tubules of digestive gland after exposure to NaPT for 96 h. As a result, biocidal sodium pyrithione has adverse effects on the mussels even in short-term exposures and low concentrations.

Assessing the risk of booster biocides for the marine environment: A case study at the Belgian part of the North Sea

The biofouling of submerged surfaces such as ship hulls is often prevented by using anti-fouling components in combination with booster biocides. These booster biocides enter the water column and may affect non-target organisms. Although different negative effects have been associated with the use of booster biocides, their effects on non-target organisms are often unknown. So far, the environmental risks for booster biocides have barely been quantified in the North Sea. In this work, the concentration of five commonly used booster biocides as well as tributyltin has been monitored at five dredged spoil disposal sites in the Belgian part of the North Sea and the harbour and ports of Nieuwpoort, Oostende, and Zeebrugge. Hotspots were discovered where the concentration of one or more booster biocides exceeded the predicted no-effect concentration. Tributyltin has been banned since 2008, but concentrations of 237- to 546-fold of the predicted no-effect concentration were detected in the harbours and ports. Moreover, TBT has been detected in the same order of magnitude in other sea basins, emphasizing the need to monitor the trends and impact of booster biocides and TBT in environmental monitoring programs.

An assessment of approaches and techniques for estimating water pollution releases from aquaculture production facilities

The rapid expansion of the aquaculture industry raises concerns about water pollution from aquaculture production facilities (APFs). APFs release pollutants, including fish feed and feces, threatening the environment. The United Nations has introduced regulatory tools like the National Baseline Budget of pollutants (NBB) and Pollutant Release and Transfer Registers (PRTRs) to monitor pollution. However, these tools lack specific capabilities for estimating aquaculture-related pollution, especially from mariculture non-point sources (NPS). The United Nations Programme for the Assessment and Control of Marine Pollution in the Mediterranean (UNEP/MAP) stresses the need for an inventory and guidance document. Our comprehensive literature review focused on (1) NPS discharges of specific pollutants from APFs, (2) methods for estimating potential pollution releases from aquaculture, and (3) compiling information into a guidance document summarizing estimation methods. The geographical coverage of our study includes Europe, Australia, the USA, Canada, and East/Southeast Asia.

A Critical Review of AMR Risks Arising as a Consequence of Using Biocides and Certain Metals in Food Animal Production

The focus of this review was to assess what evidence exists on whether, and to what extent, the use of biocides (disinfectants and sanitizers) and certain metals (used in feed and other uses) in animal production (both land and aquatic) leads to the development and spread of AMR within the food chain. A comprehensive literature search identified 3434 publications, which after screening were reduced to 154 relevant publications from which some data were extracted to address the focus of the review. The review has shown that there is some evidence that biocides and metals used in food animal production may have an impact on the development of AMR. There is clear evidence that metals used in food animal production will persist, accumulate, and may impact on the development of AMR in primary animal and food production environments for many years. There is less evidence on the persistence and impact of biocides. There is also particularly little, if any, data on the impact of biocides/metal use in aquaculture on AMR. Although it is recognized that AMR from food animal production is a risk to human health there is not sufficient evidence to undertake an assessment of the impact of biocide or metal use on this risk and further focused in-field studies are needed provide the evidence required.

Analysis of the Antibacterial Activity and the Total Phenolic and Flavonoid Contents of the Moringa oleifera Leaf Extract as an Antimicrobial Agent against Pseudomonas aeruginosa

Pseudomonas aeruginosa is a bacterium that causes metal deterioration by forming biofilms on metal surfaces. This work was carried out to analyze the antibacterial activity and the phenolic and flavonoid contents of the Moringa oleifera leaf extract against Pseudomonas aeruginosa. M. oleifera leaves were extracted in a methanol solution at different concentrations. The M. oleifera leaf extract yields were 12.84%, 18.96%, and 19.64% for the 100%, 75%, and 50% methanol ratios, respectively. Extracts of M. oleifera leaves had a minimum inhibiting concentration (MIC) of approximately 6144 μg/mL against P. aeruginosa for a ratio of 100% methanol. In addition, no antibacterial activity was found for the 75% and 50% methanol ratios. The total phenolic levels were 16.26%, 12.73%, and 12.33% for the 100%, 75%, and 50% methanol solvent ratios, respectively. The total amounts of flavonoids were 23.32%, 3.40%, and 0.64% for the 100%, 75%, and 50% methanol solvents, respectively. The chemical structure of M. oleifera consists of kaemferol-3-O-rutinoside, quercimeritrin, kaempferol-3-O-β-D-glucopyranoside, stearidonic acid, trichosanic acid, pyrophaeophorbide A, and stigmastan-3,6-dione. The concentration of the solvent is essential in the extraction of plant constituents. Different concentrations indicate differences in antibacterial activity, phenolic and flavonoid contents, and chemical structure.

Antifouling booster biocides in Latin America and the Caribbean: A 20-year review

This review summarized booster biocides studies from Latin America and the Caribbean during the last two decades. Studies were focused on six countries, with most of them in Brazil. In water and sediment, diuron and Irgarol were the most abundant and frequent biocides, probably due to their former intense use. Antifouling paint particles were also reported and had mainly DCOIT, which is currently the most used booster biocide. Toxicity of individual booster biocides was tested in laboratory, and most effects were related to chlorothalonil, DCOIT, dichlofluanid, and Irgarol, including, but not limited to DNA damage, fertility decrease, and mortality at different trophic levels. This review highlighted the need for further studies on environmental occurrence of booster biocides in Latin America and Caribbean associated to ecotoxicological studies. Such information is essential to determine the potential ecological risks and to create directives regarding safe limits of booster biocides in aquatic systems.

Microcapsule functionalization enables rate-determining release from cellulose nonwovens for long-term performance

Functional textiles is a rapidly growing product segment in which sustained release of actives often plays a key role. Failure to sustain the release results in costs due to premature loss of functionality and resource inefficiency. Conventional application methods such as impregnation lead to an excessive and uncontrolled release, which - for biocidal actives - results in environmental pollution. In this study, microcapsules are presented as a means of extending the release from textile materials. The hydrophobic model substance pyrene is encapsulated in poly(D,L-lactide-co-glycolide) microcapsules which subsequently are loaded into cellulose nonwovens using a solution blowing technique. The release of encapsulated pyrene is compared to that of two conventional functionalization methods: surface and bulk impregnation. The apparent diffusion coefficient is 100 times lower for encapsulated pyrene compared to impregnated pyrene. This clearly demonstrates the rate-limiting barrier properties added by the microcapsules, extending the potential functionality from hours to weeks.

Fluorescence Analysis of Biocide Efficiency in Antifouling Coatings against Cyanobacteria

This study focused on the antifouling effect of copper oxide (Cu₂O)- and zineb-based coatings against Cyanothece sp. ATCC 51142 by analysing photosynthetic activity using chlorophyll fluorescence. The photoautotrophically grown cyanobacterium was exposed to toxic coatings over a short-term period of 32 h. The study showed that Cyanothece cultures are particularly sensitive to biocides (i) released from antifouling paints and (ii) exhibited by contact with the coated surfaces. Changes in the maximum quantum yield of photosystem II (F_V/F_M) were observed within the first 12 h of exposure to the coatings. Partial recovery of F_V/F_M in Cyanothece was revealed 24 h post exposure to a copper- and zineb-free coating. In this research, we proposed an analysis of the evaluation of fluorescence data to study the initial response of cyanobacterial cells to copper- and non-copper-based antifouling coatings formulated with zineb. We evaluated the dynamics of coating toxicity by determining the characteristic time constants of changes in the F_V/F_M. Within the most toxic paints studied, those formulated with the highest concentration of Cu₂O and zineb, the estimated time constants were 3.9 times lower compared to the copper- and zineb-free paint. The use of zineb in copper-based antifouling coatings enhanced the toxic effect of paints and contributed to a faster decline in photosystem II activity in Cyanothece cells. The analysis we proposed, along with the fluorescence screening results, may be useful in evaluating the initial antifouling dynamic action against photosynthetic aquacultures.

Synthesis of Lysoglycerophosphocholines from Crude Soybean Lecithins as Sustainable and Non-toxic Antifouling Agents against the Golden Mussel Limnoperna fortunei

This research aimed to produce, on a multigram scale, a new class of non-toxic, halogen- and metal-free antifouling agents from the abundant lecithin byproducts of industrial soybean oil extraction. Three glycerophospholipid analogues were prepared by a facile methanolysis of crude soybean lecithins and a subsequent solvent-free O-alkylation: lysoglycerophosphocholines (LGPCs) and its ether derivatives O-alkyl lysoglycerophosphocholines (ALPCs). As efficient antiproliferative agents, LGPCs and ALPCs are an eco-friendly alternative to current commercial antifoulants which possess significant toxicity to aquatic life. In situ immersion tests of coated stainless-steel nets with previously incorporated automotive paint products, LGPCs and ALPCs (1-O-octadecyl-2-O-acyl-sn-glycero-3-phosphocholine, ALPC18, and 1-O-hexadecyl-2-O-acyl-sn-glycero-3-phosphocholine, ALPC16), in an aquaculture reservoir in SP-Brazil revealed significant growth inhibition against macrofouling species, especially the epibiotic golden mussel (Limnoperna fortunei), when compared with the control. These results promise a more sustainable and ecologically innocuous approach to combating the biofouling phenomenon and the deeply concerning dissemination of the golden mussel which has provoked an economic crisis in the energy and aquaculture sectors.

Acute Toxicity of a Novel anti-fouling Material Additive DCOIT to Marine Chlorella sp

DCOIT (4,5-dichloro-2-n-octyl-4-isothiazolin-3-one) is the main ingredient in SeaNine-211, a new antifouling agent that replaces organotin compounds to prevent the growth of fouling organisms on board. Biocides from antifoulants can cause problems for marine ecosystems by destroying non-target algal species. This study evaluated the potential adverse effects DCOIT using the Marine Chlorella sp. The concentration of DCOIT were set according to the semi-inhibitory concentrations for acute exposure experiments, and relevant oxidative stress indicators were measured to assess the acute toxic effects. The results showed that the inhibition concentrations (IC50) of DCOIT against Marine Chlorella sp was 2.522 mg/L. The genes related to photosynthesis and antioxidant capacity showed the effect of promoting low concentration and inhibiting high concentration. In addition, based on the ultrastructural observation and the expression analysis of photosynthesis related genes, it was found that DCOIT had a significant effect on plant photosynthesis.

Lipid-related metabolism during zebrafish embryogenesis under unbalanced copper homeostasis

Copper (Cu) is an essential trace element, playing an important role in lipid metabolism, and its transporters ATP7A and ATP7B, as Cu-transporting P-type ATPases, are involved in maintaining the Cu homeostasis in cells. Numerous studies in mammals have shown that Cu homeostasis and lipid metabolism are closely related, but studies on the link between the effects of excess Cu, ATP7A, and ATP7B on lipid metabolism during vertebrate embryogenesis are scarce. In this study, zebrafish disease models with Cu overload and ATP7A and ATP7B inactivation, respectively, were used to study the lipid metabolism-related differentially expressed genes (DEGs) which were enriched in the models. The dynamic and spatiotemporal expressions of the DEGs in WTs, atp7a^-/-, and atp7b^-/- mutants with or without Cu stress were unveiled in this study and they mostly distributed in brain at 24 hpf then in liver and intestine at 96 hpf, suggesting their potential roles in lipid and glycogen metabolism to apply energy for normal development in zebrafish. Meanwhile, the correlation analysis for the DEGs among the three groups unveiled that most of the DEGs were involved in the glyceride metabolism pathway. This is the first report to establish the relationship between atp7a and atp7b with Cu-stimulated intestinal and liver lipid metabolism during fish embryogenesis, and this study will provide a theoretical basis for fish embryonic development and lipid metabolism disorders under unbalanced copper homeostasis.

Influence of Sharklet-Inspired Micropatterned Polymers on Spatio-Temporal Variations of Marine Biofouling

This article aims to show the influence of surface characteristics (microtopography, chemistry, mechanical properties) and seawater parameters on the settlement of marine micro- and macroorganisms. Polymers with nine microtopographies, three distinct mechanical properties, and wetting characteristics are immersed for one month into two contrasting coastal sites (Toulon and Kristineberg Center) and seasons (Winter and Summer). Influence of microtopography and chemistry on wetting is assessed through static contact angle and captive air bubble measurements over 3-weeks immersion in artificial seawater. Microscopic analysis, quantitative flow cytometry, metabarcoding based on the ribulose biphosphate carboxylase (rbcL) gene amplification, and sequencing are performed to characterize the settled microorganisms. Quantification of macrofoulers is done by evaluating the surface coverage and the type of organism. It is found that for long static in situ immersion, mechanical properties and non-evolutive wettability have no major influence on both abundance and diversity of biofouling assemblages, regardless of the type of organisms. The apparent contradiction with previous results, based on model organisms, may be due to the huge diversity of marine environments, both in terms of taxa and their size. Evolutive wetting properties with wetting switching back and forth over time have shown to strongly reduce the colonization by macrofoulers.

Heavy Metal Pollution in Aquaculture: Sources, Impacts and Mitigation Techniques

Aquaculture is one of the fastest growing agro-industries as it presently accounts for nearly 50% of all fish for direct human consumption and 43% of total seafood supply. Fish provide about 20% average daily intake of animal protein for about 3.2 billion people globally. The treatment of aquaculture in recent years for the mitigation of heavy metals and other contaminants has been gaining traction due to the benefits of aquaculture to both man and the environment. This paper provides a review of the sources, impacts, and the various methods that have been deployed in recent years by various researchers for the treatment of heavy metal contaminated aquaculture. Related works of literature were obtained and compiled from academic search databases and were carefully analysed in this study. The dangers these metals pose to the sustainability of aquaculture were studied in this review. Studies indicate that some heavy metals, such as mercury, lead, and cadmium, due to their long-term persistence in the environment, allow them to accumulate in the food chain. Mitigation techniques such as adsorption, bio-sorption, and phytoremediation have been deployed for the treatment of heavy metal contaminated aquaculture. Some research gaps were also highlighted which could form the basis for future research, such as research centred on the effects of these metals on the embryonic development of aquaculture organisms and the alterations the metals caused in their stages of development.

Impact of Tralopyril and Triazolyl Glycosylated Chalcone in Human Retinal Cells’ Lipidome

Antifouling (AF) coatings containing booster biocides are used worldwide as one of the most cost-effective ways to prevent the attachment of marine organisms to submerged structures. Nevertheless, many of the commercial biocides, such as Econea® (tralopyril), are toxic in marine environments. For that reason, it is of extreme importance that new efficient AF compounds that do not cause any harm to non-target organisms and humans are designed. In this study, we measured the half-maximal inhibitory concentration (IC50) of a promising nature-inspired AF compound, a triazolyl glycosylated chalcone (compound 1), in an immortalized human retinal pigment epithelial cell line (hTERT-RPE-1) and compared the results with the commercial biocide Econea®. We also investigated the effects of these biocides on the cellular lipidome following an acute (24 h) exposure using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-Q-TOF/MS). Our results showed that compound 1 did not affect viability in hTERT-RPE-1 cells at low concentrations (1 μM), in contrast to Econea®, which caused a 40% reduction in cell viability. In total, 71 lipids were found to be regulated upon exposure to 10 µM of both compounds. Interestingly, both compounds induced changes in lipids involved in cell death, membrane modeling, lipid storage, and oxidative stress, but often in opposing directions. In general, Econea® exposure was associated with an increase in lipid concentrations, while compound 1 exposure resulted in lipid depletion. Our study showed that exposure to human cells at sublethal Econea® concentrations results in the modulation of several lipids that are linked to cell death and survival.

Conceptualisation of multiple impacts interacting in the marine environment using marine infrastructure as an example

The human population is increasingly reliant on the marine environment for food, trade, tourism, transport, communication and other vital ecosystem services. These services require extensive marine infrastructure, all of which have direct or indirect ecological impacts on marine environments. The rise in global marine infrastructure has led to light, noise and chemical pollution, as well as facilitation of biological invasions. As a result, marine systems and associated species are under increased pressure from habitat loss and degradation, formation of ecological traps and increased mortality, all of which can lead to reduced resilience and consequently increased invasive species establishment. Whereas the cumulative bearings of collective human impacts on marine populations have previously been demonstrated, the multiple impacts associated with marine infrastructure have not been well explored. Here, building on ecological literature, we explore the impacts that are associated with marine infrastructure, conceptualising the notion of correlative, interactive and cumulative effects of anthropogenic activities on the marine environment. By reviewing the range of mitigation approaches that are currently available, we consider the role that eco-engineering, marine spatial planning and agent-based modelling plays in complementing the design and placement of marine structures to incorporate the existing connectivity pathways, ecological principles and complexity of the environment. Because the effect of human-induced, rapid environmental change is predicted to increase in response to the growth of the human population, this study demonstrates that the development and implementation of legislative framework, innovative technologies and nature-informed solutions are vital, preventative measures to mitigate the multiple impacts associated with marine infrastructure.

Comparative Analysis of the Mechanism of Resistance to Silver Nanoparticles and the Biocide 2,2-Dibromo-3-Nitrilopropionamide

Antimicrobials such as nanoparticles and biocides are used to control microbial growth. We used Escherichia coli to study the process of acquired resistance to silver nanoparticles (Ag-NP) and the industrial biocide DBNPA when grown in sub-MICs. We determined the MICs of these two antimicrobials against E. coli. We then performed an experimental evolution study where E. coli was grown in subinhibitory concentrations of the antimicrobials and transferred 10 times. We then tracked the changes in growth characteristics, lactate dehydrogenase (LDH) activity, reactive oxidative species (ROS) production, and the role of efflux pumps in conferring resistance. We also performed genome sequencing to determine the genetic basis for acquired resistance. Our results showed that E. coli could rapidly develop resistance to Ag-NP and DBNPA after growth in low concentrations of the antimicrobials. The expression of efflux pumps plays a vital role in both Ag-NP and DBNPA resistance. Multiple mutations occurred in the adapted strains that may confer resistance to both Ag-NP and DBNPA. Our study provides insights into mechanisms of adaptation and resistance to antimicrobials. Our results suggest that there are some shared mechanisms to resist nanoparticles and biocides as well as some key differences. The mechanism of resistance to Ag-NP might be related to flagellin production, while efflux pumps seem to be associated with resistance to DBNPA. This work provides a comparative study of the mechanisms of acquired resistance to these two types of antimicrobials.

Transcriptomic Analysis of Hepatotoxicology of Adult Zebrafish (Danio rerio) Exposed to Environmentally Relevant Oxytetracycline

The extensive use of the broad-spectrum antibiotics like oxytetracycline (OTC) has become a serious environmental issue globally. OTC has profound negative effects on aquatic organisms including fishes. In this study, RNA-Seq analysis was employed to examine the possible molecular mechanism of hepatotoxicology in zebrafish induced by OTC exposure. Adult male zebrafish was exposed to 0, 5, 90, and 450 μg/L OTC for 3 weeks. The results showed the decrease in body weight and tail length but the increase in total length of zebrafish under OTC exposure in a dose-dependent way. In addition, severe histopathological damages were featured by increasing tissue vacuolization in the livers of 450 μg/L OTC group. Moreover, RNA-Seq analysis revealed that molecular signaling and functional pathways in the liver were disrupted by OTC exposure. Furthermore, the down-regulation of gene expression after OTC exposure was found on both the genes related to fatty acid degradation and the genes related to lipid synthesis. The present study implied that OTC induced liver malfunction and fish health risks through growth retard, histopathological damages, molecular signaling disruption, genetic expression alteration, and lipid metabolism disturbance.

Anti-barnacle biofouling coatings for the protection of marine vessels: synthesis and progress

Marine biofouling has gnawed both mobile and non-mobile marine structures since time immemorial, leading to the deterioration of designed operational capabilities as well as a loss of valuable economic revenues. Mitigation of biofouling has been the primary focus of researchers and scientists from across the globe to save billions of dollars wasted due to the biological fouling of marine structures. The availability of an appropriate environment along with favorable substrata initiates biofilm formation within a few minutes. The crucial element in establishing a gelatinous biofilm is the excreted metabolites of destructive nature and exopolymeric substances (EPSs). These help in securing as well as signaling numerous foulants to establish themselves on this substrate. The larvae of various benthic invertebrates adhere to these suitable surfaces and transform from juveniles to adult barnacles depending upon the environment. Despite biofouling being characteristically witnessed for a month or lengthier timeframe, the preliminary phases of the fouling process typically transpire on a much lesser timescale. A few natural and synthetic additives had demonstrated excellent non-toxic anti barnacle establishment capability; however, further development into commercial products is still far-fetched. This review collates the specific anti-barnacle coatings, emphasizing natural additives, their sources of extraction, general life cycle analysis, and concluding future perspectives of this niche product.

Biocides in antifouling paint formulations currently registered for use

Antifouling paints incorporate biocides in their composition seeking to avoid or minimize the settlement and growing of undesirable fouling organisms. Therefore, biocides are released into the aquatic environments also affecting several nontarget organisms and, thus, compromising ecosystems. Despite global efforts to investigate the environmental occurrence and toxicity of biocides currently used in antifouling paints, the specific active ingredients that have been used in commercial products are poorly known. Thus, the present study assessed the frequencies of occurrence and relative concentrations of biocides in antifouling paint formulations registered for marketing worldwide. The main data were obtained from databases of governmental agencies, business associations, and safety data sheets from paint manufacturers around the world. The results pointed out for 25 active ingredients currently used as biocides, where up to six biocides have been simultaneously used in the examined formulations. Cuprous oxide, copper pyrithione, zinc pyrithione, zineb, DCOIT, and cuprous thiocyanate were the most frequent ones, with mean relative concentrations of 35.9 ± 12.8%, 2.9 ± 1.6%, 4.0 ± 5.3%, 5.4 ± 2.0%, 1.9 ± 1.9%, and 18.1 ± 8.0% (w/w) of respective biocide present in the antifouling paint formulations. Surprisingly, antifouling paints containing TBT as an active ingredient are still being registered for commercialization nowadays. These results can be applied as a proxy of biocides that are possibly being used by antifouling systems and, consequently, released into the aquatic environment, which can help to prioritize the active ingredients that should be addressed in future studies.

Zinc pyrithione exposure compromises oocyte maturation through involving in spindle assembly and zinc accumulation

Zinc Pyrithione (ZPT), a Food and Drug Administration (FDA) approved chemical, is widely used for topical antimicrobials and cosmetic consumer products, including anti-dandruff shampoos. ZPT and its degraded byproducts have detected in large quantities in the environment, and identified to pose healthy risks on aquatic organisms and human. However, so far, knowledge about ZPT effects on female reproduction, particularly oocyte maturation and quality, is limited. Herein, we investigated the adverse impact of ZPT on mouse oocyte maturation and quality in vitro and found exposure to ZPT significantly compromises oocyte maturation. The results revealed that ZPT disturbed the meiotic cell cycle by impairing cytoskeletal dynamics, kinetochore-microtubule attachment (K-MT), and causing spindle assembly checkpoints (SAC) continuous activation. Further, we observed the microtubule-organizing centers (MTOCs) associated proteins p-MAPK and Aurora-A were disrupted in ZPT-treated oocytes, signified by decreased expression and abnormal localization, responsible for the severe cytoskeletal defects. In addition, ZPT exposure induced a significant increase in the levels of H3K9me2, H3K9me3, H3K27me1, and H3K27me3, suggesting the alterations of epigenetic modifications. Moreover, the accumulation of zinc ions (Zn2+) was observed in ZPT-treated oocytes, which was detrimental because overmuch intracellular Zn2+ disrupted oocyte meiosis. Finally, these above alterations impaired spindle organization and chromosome alignment in metaphase-II (MII) oocytes, indicative of damaged oocytes quality. In conclusion, ZPT exposure influenced oocyte maturation and quality via involvement in MTOCs-associated proteins mediated spindle defects, altered epigenetic modifications and zinc accumulation.

Advanced oxidation technologies and constructed wetlands in aquaculture farms: What do we know so far about micropollutant removal?

Aquaculture is the fastest growing animal food-producing sector. Water is the central resource for aquaculture, and it is essential that its quality be preserved. Micropollutants (MPs) can reach aquaculture through anthropogenic addition or inlet water, and may cause harmful effects such as endocrine disruption and antibiotic resistance, adversely affecting the fish species being farmed. Furthermore, the discharge of aquaculture effluents into the environment may contribute to the deterioration of water courses. In this sense, the implementation of environmentally responsible measures in aquaculture farms is imperative for the protection of ecosystems and human health. The European Commission (EC) has recently launched a guiding document promoting ecological aquaculture practices; however, options for water treatment are still lacking. Conventional processes are not designed to deal with MPs; this review article consolidates relevant information on the application of advanced oxidation technologies (AOTs) and constructed wetlands (CWs) as potential strategies in this regard. Although 161 studies on the application of AOTs or CWs in aquaculture have already been published, only 34 focused on MPs (28 on AOTs and 6 on CWs), whereas the others reported the removal of contaminants such as bacteria, organic matter, solids and inorganic ions. No study coupling both treatments has been reported to date for the removal of MPs from aquaculture waters. AOTs and CWs are prospective alternatives for the treatment of aquacultural aqueous matrices. However, the type of aquaculture activity and the specifications of these available technologies should be considered while selecting the most suitable treatment option.

Real-time changes of the adsorption process and conformation of marine dissolved organic matters on the solid-liquid interface

In this study, the adsorption characteristics of marine dissolved organic matters (MDOMs) on the solid-liquid interface in the coastal waters was investigated. The results showed that the organic macromolecules with adsorption ability in MDOMs are not rigid molecules. However, the macromolecules have viscoelasticity properties. At different dilution ratios, the MDOMs adsorption process includes rapid (0-200 s) and slow adsorption (200 s later) periods. MDOMs adsorption in the solid-liquid interface is a dynamic process in which adsorption and hydration occur simultaneously. MDOMs concentration is an important driving force for adsorption. The three macromolecules of acid polysaccharides, protein-like, and polycarboxylate-type humic acids in MDOMs are rich in functional groups and they have the ability to absorb to solid surface. Acidic polysaccharides exhibit a sustained adsorption ability, while the adsorption of other macromolecules occurred only in the initial rapid adsorption period. In addition, the acid polysaccharides show weak thixotropy during the adsorption process. It would cause the stretching of macromolecular structure of the adsorption layer, enhancing the hydration of the adsorption layer. The study shows the adsorption process of MDOMs at the solid-liquid interface and the structural characteristics of the adsorption layer. It can provide helpful information for the inhibition and removal of MDOMs pollution during the actual development of marine resources.

Effects of Exposure to Trade Antifouling Paints and Biocides on Larval Settlement and Metamorphosis of the Compound Ascidian Botryllus schlosseri

To evaluate the effects of antifouling paints and biocides on larval settlement and metamorphosis, newly hatched swimming larvae of the compound ascidian Botryllus schlosseri, a dominant species of soft-fouling in coastal communities, were exposed to (i) substrata coated with seven antifouling paints on the market containing different biocidal mixtures and types of matrices and (ii) sea water containing various concentrations of eight biocidal constituents. All antifouling paints showed high performance, causing 100% mortality and metamorphic inhibition, with ≥75% not-settled dead larvae. All antifouling biocides prevented the settlement of larvae. The most severe larval malformations, i.e., (i) the formation of a bubble encasing the cephalenteron and (ii) the inhibition of tail resorption, were observed after exposure to metal and organometal compounds, including tributyltin (TBT) at 1 μM (325.5 µg L−1), zinc pyrithione (ZnP) at 1 μM (317.7 µg L−1), and CuCl at 0.1 μM (98.99 µg L−1), and to antimicrobials and fungicides, including Sea-Nine 211 at 1 μM (282.2 µg L−1) and Chlorothalonil at 1 μM (265.9 µg L−1). The herbicides seemed to be less active. Irgarol 1051 was not lethal at any of the concentrations tested. Diuron at 250 μM (58.2 mg L−1) and 2,3,5,6-tetrachloro-4-(methylsulphonyl)pyridine (TCMS pyridine) at 50 μM (14.8 mg L−1) completely inhibited larval metamorphosis. These results may have important implications for the practical use of different antifouling components, highlighting the importance of their testing for negative impacts on native benthic species.

Comparative study of the effects of biocides and metal oxide nanoparticles on microbial community structure in a stream impacted by hydraulic fracturing

Our study goal was to investigate the impact of biocides and nanoparticles (NPs) on the microbial diversity in a hydraulic fracturing impacted stream. Biocides and NPs are known for their antimicrobial properties and controlling microbial growth. Previous work has shown that biocides can alter the microbial community composition of stream water and may select for biocide-resistant bacteria. Additional studies have shown that nanoparticles can also alter microbial community composition. However, previous work has often focused on the response to a single compound. Here we provide a more thorough analysis of the microbial community response to three different biocides and three different nanoparticles. A microcosm-based study was undertaken that exposed stream microbial communities to either biocides or NPs. Our results showed a decrease in bacterial abundance with different types of nanoparticles, but an increase in microbial abundance in biocide-amended treatments. The microbial community composition (MCC) was distinct from the controls in all biocide and NP treatments, which resulted in differentially enriched taxa in the treatments compared to the controls. Our results indicate that NPs slightly altered the MCC compared to the biocide-treated microcosms. After 14 days, the MCC in the nanoparticle-treated conditions was similar to the MCC in the control. Conversely, the MCC in the biocide-treated microcosms was distinct from the controls at day 14 and distinct from all conditions at day 0. This finding may point to the use of NPs as an alternative to biocides in some settings.

Environmental and human health impacts of cruise tourism: A review

The intensive growth of cruise tourism worldwide during recent decades is leading to growing concerns over the sector's global environmental and health impacts. This review combines for the first time various sources of information to estimate the magnitude of the cruise industry's environmental and public health footprints. This research shows that cruising, despite technical advances and some surveillance programmes, remains a major source of air, water (fresh and marine) and land pollution affecting fragile habitats, areas and species, and a potential source of physical and mental human health risks. Health risks impact both the people on board (crew and passengers) and on land (workers of shipyards where cruise ships are dismantled and citizens inhabiting cities with cruise ports and shipyards). In this context, we argue that the cruise industry should be held accountable with more monitoring and regulation to prevent or minimize the growing negative environmental and human health impacts.

Nanocoating Is a New Way for Biofouling Prevention

Biofouling is a major concern to the maritime industry. Biofouling increases fuel consumption, accelerates corrosion, clogs membranes and pipes, and reduces the buoyancy of marine installations, such as ships, platforms, and nets. While traditionally marine installations are protected by toxic biocidal coatings, due to recent environmental concerns and legislation, novel nanomaterial-based anti-fouling coatings are being developed. Hybrid nanocomposites of organic-inorganic materials give a possibility to combine the characteristics of both groups of material generating opportunities to prevent biofouling. The development of bio-inspired surface designs, progress in polymer science and advances in nanotechnology is significantly contributing to the development of eco-friendly marine coatings containing photocatalytic nanomaterials. The review mainly discusses photocatalysis, antifouling activity, and formulation of coatings using metal and metal oxide nanomaterials (nanoparticles, nanowires, nanorods). Additionally, applications of nanocomposite coatings for inhibition of micro- and macro-fouling in marine environments are reviewed.

Assessment of Environmental Pollution and Human Exposure to Pesticides by Wastewater Analysis in a Seven-Year Study in Athens, Greece

Pesticides have been used in large amounts around the world for decades and are responsible for environmental pollution and various adverse effects on human health. Analysis of untreated wastewater can deliver useful information on pesticides’ use in a particular area and allow the assessment of human exposure to certain substances. A wide-scope screening method, based on liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry, was applied, using both target and suspect screening methodologies. Daily composite influent wastewater samples were collected for seven or eight consecutive days in Athens between 2014 and 2020 and analyzed for 756 pesticides, their environmental transformation products and their human metabolites. Forty pesticides were quantified at mean concentrations up to 4.9 µg/L (tralkoxydim). The most abundant class was fungicides followed by herbicides, insect repellents, insecticides and plant growth regulators. In addition, pesticide transformation products and/or metabolites were detected with high frequency, indicating that research should be focused on them. Human exposure was evaluated using the wastewater-based epidemiology (WBE) approach and 3-ethyl-carbamoyl benzoic acid and cis-1,2,3,6-tetrahydrophthalimide were proposed as potential WBE biomarkers. Wastewater analysis revealed the presence of unapproved pesticides and indicated that there is an urgent need to include more transformation products in target databases.

Application, release, ecotoxicological assessment of biocide in building materials and its soil microbial response

Biocides are used in building materials to protect the building against microbial colonization and biodeterioration. However, these biocides are introduced by gradual leaching into soils in proximity of the buildings. This review discusses the aspects and characteristics of biocides from building materials in terms of (i) in-situ leaching and simulation thereof in-vitro and in-field tests, (ii) persistence, as well as photolytic and biodegradation, and its influence on toxicological evaluation, and (iii) evaluation of terrestrial toxicity by conventional ecotoxicological tests and novel holistic testing approaches. These aspects are influenced by multiple parameters, out of which water availability, physicochemical properties of microhabitats, combination of biocidal building materials, soil parameters, and composition of the soil microbiome are of utmost relevance. Deeper understanding of this multiparametric system and development of comprehensive characterization methodologies remains crucial, as to facilitate realistic assessment of the environmental impact of biocides used in construction materials and the corresponding degradation byproducts.

Assessing trace-elements as indicators of marine finfish aquaculture across three distinct Canadian coastal regions

Several trace-elements have been identified as indicators of finfish aquaculture organic enrichment. In this study, sediment sampling at finfish farms was completed as part of an Aquaculture Monitoring Program in three distinct Canadian regions. Despite diverse datasets, multivariate analyses show a consistent clustering of known direct (Cu and Zn) and indirect (Cd, Mo and U) tracers of aquaculture activities with sediment organic matter (OM) and/or total dissolved sulfides concentrations. OM content was also a predictor of Cu, Zn, Mo and U concentrations according to decision tree analyses. Distance from cages did not emerge as a strong driver of differences among sampling points; however, a tendency towards negative associations is clear especially for Zn. Enriched stations as determined after geochemical normalization were mostly localized within 150 m of net-pens. Selected trace-elements (in particular Zn) can be useful indicators of aquaculture organic enrichment in different ecosystems and valuable tools for monitoring programs.

Assessment of the environmental compatibility and antifouling performance of an innovative biocidal and foul-release multifunctional marine coating

The control of marine biofouling has raised serious environmental concerns, thus the continuous release of toxic and persistent biocidal agents applied as anti-biofouling coatings have triggered the search for non-toxic strategies. However, most of them still lack rigorous evaluation of their ecotoxicity and antifouling effects under real scenarios and their correlation with simulated assays. In this work, the biocide releasing risk and ecotoxicity of a biocidal and foul-release polydimethylsiloxane (PDMS)-based marine coating containing grafted Econea biocide (<0.6 wt.%) were evaluated under simulated real mechanical wear conditions at a pilot-scale system, and under extreme wear scenarios (washability settings). The coating system demonstrated low environmental impact against the model Vibrio fischeri bacterium and marine algae, associated with the effective biocide grafting in the coating matrix and subsequent biocide release minimization. This multifunctional coating system also showed auspicious antifouling (AF) effects, with an AF performance index significantly higher (API > 89) than a single foul-release system (AF < 40) after two and half years at a real immersion scenario in the Portuguese shore of the Atlantic Ocean. These field results corroborated the antibiofilm performance evaluated with Pseudoalteromonas tunicata at simulated dynamic marine conditions after seven-week assays. This eco-friendly multifunctional strategy, validated by both simulated testing conditions and real field tests, is believed to be a powerful tool for the development of AF technologies and a potential contribution to the quest for new environmentally friendly antifouling solutions.

Insights into the Antimicrobial Potential of Dithiocarbamate Anions and Metal-Based Species

Bacterial infection remains a worldwide problem that requires urgent addressing. Overuse and poor disposal of antibacterial agents abet the emergence of bacterial resistance mechanisms. There is a clear need for new approaches for the development of antibacterial therapeutics. Herein, the antibacterial potential of molecules based on dithiocarbamate anions, of general formula R(R’)NCS2(−), and metal salts of transition metals and main group elements, is summarized. Preclinical studies show a broad range of antibacterial potential, and these investigations are supported by appraisals of possible biological targets and mechanisms of action to guide chemical syntheses. This bibliographic review of the literature points to the exciting potential of dithiocarbamate-based therapeutics in the crucial battle against bacteria. Additionally, included in this overview, for the sake of completeness, is mention of the far fewer studies on the antifungal potential of dithiocarbamates and even less work conducted on antiparasitic behavior.

Natural polyketide 6-pentyl-2H-pyrone-2-one and its synthetic analogues efficiently prevent marine biofouling

Biofouling is a widespread phenomenon in oceans worldwide. With increasing human development and activities in open and coastal waters, and due to the environmental impact of AF organotins and copper-based paint, the demand for nontoxic antifouling (AF) paints is increasing. Various bioassays for antimicrobial activity, anti-biofilm formation and anti-barnacle settlement were established to evaluate the possibility of using marine natural products as AF agents. A series of natural products, isolated from the marine-derived fungi Trichoderma atroviride and T. reesei, were evaluated for their AF activity. One pyrone-type compound (1) demonstrated significant inhibitory activities toward barnacle cyprid settlement. Furthermore, a series of pyrone analogues (S1-S6) were synthesized, and their bioactivities were evaluated in the established systems. The results showed that compounds S5 and S6 exhibited a broad spectrum of bioactivities, such as anti-barnacle settlement, anti-biofilm formation and antimicrobial activities.

A Structural Survey of Poly-Functional Dithiocarbamate Ligands and the Aggregation Patterns They Sustain

An overview is presented of the crystal structures of transition metal, main group element, and lanthanide compounds containing poly-functional dithiocarbamate ligands, namely species containing two or more connected NCS2− residues. In all, there are 40 different ligands of this type that have been characterised crystallographically in their heavy-element compounds with up to six NCS2− residues; all are bridging. In most cases, the resulting aggregates are zero-dimensional, often di-nuclear, but aggregates of up to 36 metal (gold) atoms are noted. There are smaller numbers of one-, two-, and three-dimensional architectures sustained by poly-functional dithiocarbamate ligands in their respective crystals. The survey highlights the opportunities afforded by this generally under-studied class of ligand.

Raposo MM. Optical Fiber Sensors for Biocide Monitoring: Examples, Transduction Materials, and Prospects

Antifouling biocides are toxic to the marine environment impacting negatively on the aquatic ecosystems. These biocides, namely, tributyltin (TBT) and Cu(I) compounds, are used to avoid biofouling; however, their toxicity turns TBT and Cu(I) monitoring an important health issue. Current monitoring methods are expensive and time-consuming. This review provides an overview of the actual state of the art of antifouling paints' biocides, including their impact and toxicity, as well as the reported methods for TBT and Cu(I) detection over the past decade. The principles of optical fiber sensors (OFS) applications, with focus on environmental applications, and the use of organic chemosensors in this type of sensors are debated. The multiplexing ability of OFS and their application on aquatic environments are also discussed.

Analysis of NMR Spectra of Submicro-Containers with Biocide DCOIT

Nowadays, the search for and development of new forms of materials with biocides is an actual problem of the modern science of nanosized materials due to the problem of microbiological contamination, which can be solved by using nanocontainers carrying biocides. Depending on the morphology of the nanocontainers and the filled active agents, it is possible to create coatings with specially designed self-healing functionality or multifunctional properties. The purpose of this work was to produce submicro-containers (SMCs) with a shell of SiO2 nanoparticles and a core of polymerized 3-(trimethoxysilyl) propyl methacrylate filled with 5-dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT) in an oil in water (O/W) emulsion. The chemical nature of the individual components of the system and nano-capsules were investigated using NMR spectroscopy. The size and zeta potential of the SMCs were measured by a dynamic light scattering method (d = 170–180 nm, polydispersity index PDI = 0.125 and zeta-potential = 55 mV), the morphology of their outer surface was determined using SEM. The results of NMR analysis showed that during the addition of the biocide into the SMCs, its chemical structure is retained, as is its activity. Minor changes in the chemical shifts of the 1H NMR spectra of the SMCs with DCOIT, as well as of the biocide itself, confirm the inclusion of DCOIT inside the SMCs.

Oxidative stress ecology on Pacific oyster Crassostrea gigas from lagoon and offshore Italian sites

Crassostrea gigas is a sentinel species along the Italian coast. In mussels, the levels of oxidative stress biomarkers can be modulated by several environmental pollutants or pathogens and also fluctuate in response to reproductive stages and seasonal changes. In this study, adult Crassostrea gigas were sampled during summer and autumn from two lagoon and two offshore sites along the Adriatic coast of Italy in order to investigate the influence of seasonality on oxidative stress biomarkers. Trace elements load of Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se and Zn suggests low contamination for lagoon and offshore sites. Levels of total glutathione, superoxide dismutase, catalase, glutathione peroxidases, glutathione reductase and glutathione S-transferase were analyzed in digestive gland and gills of the Pacific oysters in June, July, September and October. OsHV-1 and Vibrio aestuarianus were detected in lagoon sites, but both pathogens did not affect the biomarkers levels in both tissues. Although several biological responses were found different among the four sites in the same month, principal component analysis revealed similar trend in biomarkers levels between sites during the whole sampling period. On the other hand, a different biochemical pattern through the months emerged, suggesting that the level of oxidative stress biomarkers in both tissues may be related to seasonal progress and biological cycle of oysters sampled from the two lagoons and offshore sites along the Italian coasts of the Mediterranean Sea.

Antimicrobial Resistance in Agri-Food Chain and Companion Animals as a Re-emerging Menace in Post-COVID Epoch: Low-and Middle-Income Countries Perspective and Mitigation Strategies

Antimicrobial resistance (AMR) leads to enormous financial losses from issues such as high morbidity, mortality, man-days lost, hospital length of stay, health-care, and social costs. In humans, over prescription of antimicrobials, which is presumably higher during COVID, has been identified as the major source of selection for antimicrobial resistant bacteria; however, use of antimicrobials in food and companion animals, fish, and vegetables, and the environmental resistance gene pool, also play important roles. The possibilities of unnecessary use of antibiotics as prophylaxis during and after COVID in livestock and companion animals exist in low-and middle-income countries. A considerable loss in gross domestic product (GDP) is also projected in low-and middle-income countries (LMICs) due to AMR by the year 2050, which is further going to be reduced due to economic slowdown in the post-COVID period. Veterinary hospitals dedicated to pets have cropped up, especially in urban areas of LMICs where use of antimicrobials has also been increased substantially. The inevitable preventive habit built up during COVID with the frequent use of hand sanitizer might trigger AMR due to the presence of cross-resistance with disinfectants. In LMICs, due to the rising demand for animal protein, industrial food animal production (IFAP) is slowly replacing the small-scale backyard farming system. The lack of stringent regulations and monitoring increased the non-therapeutic use of antimicrobials in industrial farms where the persistence of antimicrobial resistant bacteria has been associated with several factors other than antimicrobial use, such as co-resistance, cross-resistance, bacterial fitness, mixing of new and old animals, and vectors or reservoirs of bacterial infection. The present review describes types of antimicrobials used in agri-food chains and companion animals in LMICs with identification of the gap in data, updated categories of prevalent antimicrobial resistant bacteria, the role of animal farms as reservoirs of resistant bacteria, and mitigation strategies, with a special focus on the pivotal strategy needed in the post-COVID period.