Preparation and characterization of new nano-composite scaffolds loaded with vascular stents

Restoration of critical defects in the rabbit mandible using osteoblasts and vascular endothelial cells co-cultured with vascular stent-loaded nano-composite scaffolds

The success of large bone defect repair with tissue engineering technology depends mainly on angiogenesis and osteogenesis. In this study, we prepared poly-caprolactone/nano-hydroxyapatite/beta-calcium phosphate (PCL/nHA/β-TCP) composite scaffolds loaded with poly-(lactic-co-glycolic acid)/nano-hydroxyapatite/collagen/heparin sodium (PLGA/nHA/Col/HS) nanofiber small vascular stent by electrospinning and hot press forming-particle leaching methods. Supramolecular electrostatic self-assembly technology was used to modify the surfaces of small vascular stents to aid in hydrophilicity and anticoagulation. The surfaces of composite scaffolds were modified with an Arg-Gly-Asp (RGD) short peptide by physical adsorption to supply cell adhesion sites. The scaffolds were then combined with rabbit bone marrow-derived osteoblasts (OBs) and rabbit bone marrow-derived vascular endothelial cells (RVECs) to construct large, biologically active vascularized tissue-engineered bone in vitro; this bone was then used to repair critical bone defects in rabbit mandibles. Mechanical and biocompatibility testing results showed that PCL/nHA/β-TCP composite scaffolds loaded with small vascular stents had good surface structure, mechanical properties, biocompatibility, and bone-regeneration induction potential. Twelve weeks after implantation, histological analysis and X-ray scans showed that the use of osteoblasts and vascular endothelial cells co-cultured with PCL/nHA/β-TCP scaffolds was sufficient to repair critical defects in rabbit mandibles.

Bio-Functional Design, Application and Trends in Metallic Biomaterials

Introduction of metals as biomaterials has been known for a long time. In the early development, sufficient strength and suitable mechanical properties were the main considerations for metal implants. With the development of new generations of biomaterials, the concepts of bioactive and biodegradable materials were proposed. Biological function design is very import for metal implants in biomedical applications. Three crucial design criteria are summarized for developing metal implants: (1) mechanical properties that mimic the host tissues; (2) sufficient bioactivities to form bio-bonding between implants and surrounding tissues; and (3) a degradation rate that matches tissue regeneration and biodegradability. This article reviews the development of metal implants and their applications in biomedical engineering. Development trends and future perspectives of metallic biomaterials are also discussed.

Nucleated nanocomposites of TPU–PDMS blends based on spherical nanohydroxyapatite

The present investigation gives a profound insight into the preparation of nucleated nanocomposites of TPU–PDMS blends based on uniquely synthesized PPG-wrapped spherical nanohydroxyapatite (nHap).

Elastic large muscular vessel wall engineered with bone marrow‑derived cells under pulsatile stimulation in a bioreactor

Bone marrow‑derived cells (BMCs) have demonstrated their ability to differentiate into multiple cell lineages and may be a promising cell source for vascular tissue engineering. Although much progress has been made in the engineering of small blood vessels (<6 mm in diameter) with biodegradable materials such as polyglycolic acid (PGA), it remains a challenge to engineer large vessels (>6 mm in diameter) due to unsatisfactory biomechanical properties. The present study was to engineered an elastic large vessel wall (6 mm in diameter) using a PGA unwoven fibre scaffold covered with BMCs from canine humeri. The cell‑PGA sheet was then loaded into a bioreactor designed for the present study, with dynamic pulsatile culture conditions to mimic the physiological vessel environment. After four weeks of the pulsatile stimuli culture, an elastic vessel wall was formed. Histological analyses demonstrated that layers of smooth muscle‑like cells and well‑oriented collagenous fibres were evenly oriented in the dynamic group. By contrast, disorganised cells and randomly collagenous fibres were apparent in the static group. Furthermore, the engineered vessel wall in the dynamic group exhibited significantly improved biomechanical properties compared with those in static culture group. The approach developed in the present study was demonstrated to have promising potential to be used for the engineering of large vessel as well as other smooth muscle cell‑containing tissues, including bladder, urethral and intestinal tissues.

Fluorescent nanonetworks: a novel bioalley for collagen scaffolds and tissue engineering

Native collagen is arranged in bundles of aligned fibrils to withstand in vivo mechanical loads. Reproducing such a process under in vitro conditions has not met with major success. Our approach has been to induce nanolinks, during the self-assembly process, leading to delayed rather than inhibited fibrillogenesis. For this, a designed synthesis of nanoparticles - using starch as a template and a reflux process, which would provide a highly anisotropic (star shaped) nanoparticle, with large surface area was adopted. Anisotropy associated decrease in Morin temperature and superparamagnetic behavior was observed. Polysaccharide on the nanoparticle surface provided aqueous stability and low cytotoxicity. Starch coated nanoparticles was utilized to build polysaccharide - collagen crosslinks, which supplemented natural crosslinks in collagen, without disturbing the conformation of collagen. The resulting fibrillar lamellae showed a striking resemblance to native lamellae, but had a melting and denaturation temperature higher than native collagen. The biocompatibility and superparamagnetism of the nanoparticles also come handy in the development of stable collagen constructs for various biomedical applications, including that of MRI contrast agents.

In vitro study of a novel nanogold-collagen composite to enhance the mesenchymal stem cell behavior for vascular regeneration

Novel nanocomposites based on type I collagen (Col) containing a small amount (17.4, 43.5, and 174 ppm) of gold nanoparticles (AuNPs, approximately 5 nm) were prepared in this study. The pure Col and Col-AuNP composites (Col-Au) were characterized by the UV-Vis spectroscopy (UV-Vis), surface-enhanced raman spectroscopy (SERS) and atomic force microscopy (AFM). The interaction between Col and AuNPs was confirmed by infrared (IR) spectra. The effect of AuNPs on the biocompatibility of Col, evaluated by the proliferation and reactive oxygen species (ROS) production of mesenchymal stem cells (MSCs) as well as the activation of monocytes and platelets, was investigated. Results showed that Col-Au had better biocompatibility than Col. Upon stimulation by vascular endothelial growth factor (VEGF) and stromal derived factor-1α (SDF-1α), MSCs expressed the highest levels of αvβ3 integrin/CXCR4, focal adhesion kinase (FAK), matrix metalloproteinase-2 (MMP-2), and Akt/endothelial nitric oxide synthase (eNOS) proteins when grown on the Col-Au (43.5 ppm) nanocomposite. Taken together, Col-Au nanocomposites may promote the proliferation and migration of MSCs and stimulate the endothelial cell differentiation. These results suggest that Col-Au may be used to construct tissue engineering scaffolds for vascular regeneration.

Biodegradable and elastomeric poly(glycerol sebacate) as a coating material for nitinol bare stent

We synthesized and evaluated biodegradable and elastomeric polyesters (poly(glycerol sebacate) (PGS)) using polycondensation between glycerol and sebacic acid to form a cross-linked network structure without using exogenous catalysts. Synthesized materials possess good mechanical properties, elasticity, and surface erosion biodegradation behavior. The tensile strength of the PGS was as high as 0.28 ± 0.004 MPa, and Young's modulus was 0.122 ± 0.0003 MPa. Elongation was as high as 237.8 ± 0.64%, and repeated elongation behavior was also observed to at least three times the original length without rupture. The water-in-air contact angles of the PGS surfaces were about 60°. We also analyzed the properties of an electrospray coating of biodegradable PGS on a nitinol stent for the purpose of enhancing long-term patency for the therapeutic treatment of varicose veins disease. The surface morphology and thickness of coating layer could be controlled by adjusting the electrospraying conditions and solution parameters.

Dual delivery of BMP-2 and bFGF from a new nano-composite scaffold, loaded with vascular stents for large-size mandibular defect regeneration

The aim of this study was to investigate the feasibility and advantages of the dual delivery of bone morphogenetic protein-2 (BMP-2) and basic fibroblast growth factor (bFGF) from nano-composite scaffolds (PLGA/PCL/nHA) loaded with vascular stents (PLCL/Col/nHA) for large bone defect regeneration in rabbit mandibles. Thirty-six large bone defects were repaired in rabbits using engineering bone composed of allogeneic bone marrow mesenchymal stem cells (BMSCs), bFGF, BMP-2 and scaffolds composed of PLGA/PCL/nHA loaded with PLCL/Col/nHA. The experiments were divided into six groups: BMSCs/bFGF/BMP-2/scaffold, BMSCs/BMP-2/scaffold, BMSCs/bFGF/scaffold, BMSCs/scaffold, scaffold alone and no treatment. Sodium alginate hydrogel was used as the carrier for BMP-2 and bFGF and its features, including gelling, degradation and controlled release properties, was detected by the determination of gelation and degradation time coupled with a controlled release study of bovine serum albumin (BSA). AlamarBlue assay and alkaline phosphatase (ALP) activity were used to evaluate the proliferation and osteogenic differentiation of BMSCs in different groups. X-ray and histological examinations of the samples were performed after 4 and 12 weeks post-implantation to clarify new bone formation in the mandible defects. The results verified that the use of sodium alginate hydrogel as a controlled release carrier has good sustained release ability, and the combined application of bFGF and BMP-2 could significantly promote the proliferation and osteogenic differentiation of BMSCs (p < 0.05 or p < 0.01). In addition, X-ray and histological examinations of the samples exhibited that the dual release group had significantly higher bone formation than the other groups. The above results indicate that the delivery of both growth factors could enhance new bone formation and vascularization compared with delivery of BMP-2 or bFGF alone, and may supply a promising way of repairing large bone defects in bone tissue engineering.