Evaluation of the Interactions between Water Extractable Soil Organic Matter and Metal Cations (Cu(II), Eu(III)) Using Excitation-Emission Matrix Combined with Parallel Factor Analysis

Study on adsorption behavior of humic acid on aluminum in Enteromorpha prolifera

High level of aluminum content in Enteromorpha prolifera posed a growing threat to both its growth and human health. This study focused on exploring the factors, impacts, and process of removing aluminum from Enteromorpha prolifera using humic acid. The results showed that under experimental conditions of 0.0330 g·L-1 humic acid concentration, pH 3.80, 34 °C, and a duration of 40 min, the removal rate was up to 80.18%. The levels of major flavor components, proteins, and amino acids in Enteromorpha prolifera increased significantly after treatment, while polysaccharides and trace elements like calcium and magnesium decreased significantly. Infrared spectroscopy demonstrated that the main functional groups involved in binding with Al3+ during humic acid adsorption were hydroxyl, carboxyl, phenol, and other oxygen-containing groups. The adsorption process of Al3+ by humic acid was a spontaneous phenomenon divided into three key stages: fast adsorption, slow adsorption, and adsorption equilibrium, which resulted from both physical and chemical adsorption effects. This study provided a safe and efficient method in algae metal removal.

Changes in coal waste DOM chemodiversity and Fe/Al oxides during weathering drive the fraction conversion of heavy metals

The long-term accumulation of coal waste on the surface during natural weathering leads to the inevitable migration of heavy metals contained in the coal waste, which increases the likelihood of environmental contamination and health risks. Dissolved organic matter (DOM) and Fe/Al oxides play crucial roles in the transformation and bioavailability of heavy metals. Thus, we analyzed the Fe/Al oxide content and DOM molecular composition in coal waste with different degrees of weathering and explored the influence of DOM chemical diversity and Fe/Al oxides on the potential mobility of heavy metals. Results showed that weathering-driven decrease in Fe oxides (Fed, FeO, and Fep decreased from 82.4, 37.5, and 3.6 mg∙L-1 to 41.3, 24.7, and 2.3 mg∙L-1, respectively) led to decreases in the reducible fractions of V and Cr. The potential environmental risks of more toxic metals of Cd and As, also increased as a result of the residual fractions decreased to 32.6 % and 41.3 %, respectively. Weathering caused an increase in oxygen-to‑carbon ratio, double-bond equivalent, modified aromaticity index, nominal oxidation state of carbon, and molecular diversity and a decrease in (m/z)w and (H/C)w, suggesting that the DOM of highly weathered coal waste possessed high unsaturation, aromatic structures, hydrophilicity, and strong oxidative characteristics. Additionally, although VMF and CrMF showed significant negative correlations with O/C ratio, polyphenolic, carbohydrates, and condensed aromatics, pH remained a key environmental factor determining the potential environmental risks of V and Cr by changing the residual fractions. The mobilities of Cd and As were significantly negatively correlated with those of Fe/Al oxides, particularly Fed, FeO, Fep, and Alp. Our findings contribute to the understanding of the impact of weathering on the geochemical cycling of different coal waste components, providing priority options for environmental risk prevention and control in coal mining areas.

Chemodiversity of dissolved organic matter in cadmium-contaminated paddy soil amended with different materials

Dissolved organic matter (DOM) in soil is a key factor affecting the bioavailability of heavy metals, but very few studies have focused on the role of DOM in the use of soil amendments to mitigate heavy metal accumulation in crops. Here, eleven materials were added to cadmium (Cd)-contaminated paddy soil in greenhouse pot trials; rice was grown and harvested, the chemodiversity of post-harvest soil DOM was characterized using Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry, and the specific associations between soil DOM traits and water-extractable soil Cd concentration were identified at the molecular level. The results showed that the endogenous release caused by altering soil pH had a greater effect on soil DOM concentration than did the exogenous chemical input due to the application of organic amendments, which in turn contributed to the chemodiversity of DOM. After one season of rice cultivation, soil DOM molecules were mainly dominated by relatively low molecular weight heteroatom-free lignins. C/N, C/H ratios of organic materials influenced DOM molecular fingerprint patterns, and soil pH and redox potential were the main driving forces affecting the chemodiversity of DOM. Furthermore, the low molecular weight, high saturation, low aromaticity, and heteroatom-free DOM molecules are more likely to dissolve Cd from the soil solid phase, thus increasing the potential risk of Cd to the environment. The results provide critical information about amendments-induced changes in DOM chemodiversity and will inform the selection of appropriate soil amendments.

DGT methodology is more sensitive than conventional extraction strategies in assessing amendment-induced soil cadmium availability to rice

Using diffusive gradients in thin films (DGT) is a recently developed alternative method of rapidly evaluating the bioavailability of metals in soil. However, the method has found only limited application in systematic assessment of the bioavailability of cadmium (Cd) in red limestone paddy soils treated with different soil amendments. Of the four methods compared for estimating Cd content of rice grains from plants grown in such soils of central China treated with eleven different soil amendments in pot culture, Cd content of DGT-labile soil was significantly correlated to Cd concentrations in brown rice (R = 0.447, p < 0.01). The other three methods involved CaCl₂, diethylenetriaminepentaacetic acid (DTPA), or NH₄NO₃. Some other properties of soil, such as pH, redox potential, content of dissolved organic matter, and cation exchange capacity were also determined. A simple algorithm developed to evaluate the sensitivity of the four methods also confirmed DGT as the most efficient method to predict the bioavailability of Cd in red limestone paddy soils.

Zinc Binding to Fulvic acids: Assessing the Impact of pH, Metal Concentrations and Chemical Properties of Fulvic Acids on the Mechanism and Stability of Formed Soluble Complexes

The aim of the study was defined as a complementary analysis of molecular interactions between zinc (Zn) and fulvic acids (FAs) at a broad pH range (3-7), different metal concentrations (0-50 mg dm-3) and chemical properties of FAs and their impact on the Zn binding mechanism, stability, and efficiency. The results showed that the complexation reaction prevailed at pH 6 and 7, whereas protons exchange dominated interactions at pH 3. Stability constant of the complexes increased along with pH (logK increased from ~3.8 to 4.2). Complexation was preferred by less-humidified structures of lower molecular mass containing more oxygen groups. The number of fluorophores available for Zn(II) increased from pH 3 to 7 by ~44%. Depending on the pH, complexation involved a bidentate chelate, monodentate and bidentate bridging mode. Zn(II) binding was insufficiently modeled by the classic Stern-Volmer equation and well described by the double logarithmic equation (R > 0.94) as well as by a modified Stern-Volmer formula assuming the existence of available and unavailable fluorophore populations (R > 0.98). The fluorescence ratio of different fluorophores was proposed as an indicator of the binding affinity of various structures. A positive relationship was found between the fraction of accessible fluorophores and Zn(II) binding at pH 7 determined based on proton release (R = 0.91-0.97). The obtained results can find application in controlling the mobility and bioavailability of Zn in different conditions.

Limited Cu(II) binding to biochar DOM: Evidence from C K-edge NEXAFS and EEM-PARAFAC combined with two-dimensional correlation analysis

Multiple spectroscopic technologies and chemometric analyses were combined to explore the compositional characteristics and Cu binding performance of biochar-derived dissolved organic matter (DOM). The DOM samples were extracted from biochars produced from lignocellulose-rich rapeseed cake (RSC) by pyrolysis at 300, 500, and 700 °C (i.e., RSC300, RSC500, RSC700). Fourier transform infrared spectroscopy (FTIR) and carbon K-edge near-edge X-ray absorption fine structure spectroscopy (NEXAFS) analyses were combined to elucidate the molecular-level C species in the DOM. With the increasing pyrolysis temperature, DOM aromaticity increased, whereas the proportion of metal complexing sites (e.g., carboxyl and phenolic groups) decreased. Fluorescence excitation-emission matrix (EEM) spectroscopy with parallel factor analysis (PARAFAC) indicated that biochar DOM, irrespective of pyrolysis temperature, was mostly composed of three types of humic-like components (C1-C3), and a small amount of a protein-like component (C4). As charring temperature increased, DOM concentrations decreased substantially, but the humic-like C3 with abundant aromatic structures became predominant. Fluorescence quenching experiment and two-dimensional correlation spectroscopy (2D-COS) analysis suggested that the preferential Cu(II) binding fractions of the DOM were the humic-like substances. Moreover, the quenching curve fitting results for individual components indicated that despite the Cu(II) binding affinity was slightly enhanced as the pyrolysis temperature increased, the binding capacities of the four components decreased. In general, the DOM components from RSC biochar exhibited limited Cu(II) binding capacities (2.18-17.7 μmol L^-1). Results from this study improved understanding of the mechanisms by which biochar DOM interacts with Cu, and provided tools for fast screening of biochars to reduce their environmental risks.

Biochar-induced metal immobilization and soil biogeochemical process: An integrated mechanistic approach

The nature of biochar-derived dissolved organic matter (DOM) has a crucial role in the interactions between biochar and metal immobilization, carbon dynamics, and microbial communities in soil. This study utilized excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC) modeling to provide mechanistic evidence of biochar-induced influences on main soil biogeochemical processes. Three biochars produced from rice straw, wood, and grass residues were added to sandy and sandy loam soils and incubated for 473 d. Microbial and terrestrial humic-like fluorescent components were identified in the soils after incubation. The sandy loam soil exhibited a higher DOM with microbial sources than did the sandy soil. All biochars reduced Pb bioavailability, whereas the rice straw biochar enhanced the As bioavailability in the sandy loam soil. The biochar-derived aliphatic-DOM positively correlated with As bioavailability (r = 0.82) in the sandy loam soil and enhanced the cumulative CO₂-C (r = 0.59) in the sandy soil. The promoted cumulative CO₂-C in the sandy soil with all biochars correlated with the enhanced microbial communities, in particular, gram-positive (r = 0.59) and gram-negative (r = 0.59) bacteria. Our results suggest that the integration of EEM-PARAFAC with spectroscopic indices could be useful for a comprehensive interpretation of the soil quality changes in response to the application of biochar.

Pyrolysis Temperature-Dependent Changes in the Characteristics of Biochar-Borne Dissolved Organic Matter and Its Copper Binding Properties

The dissolved organic matter (DOM) samples from biochars produced from Jerusalem artichoke stalks by pyrolysis at 300, 500, and 700 °C were characterized using a combination of spectroscopic techniques. Additionally, the binding affinities (long K_M) and the complexation capacities (C_L) of the DOM samples with Cu(II) were calculated to assess their Cu binding properties. The biochar-borne DOM contained mainly humic-like components (C1-C3) with a small amount of a protein-like component (C4). As the charring temperature increased, the concentrations of released DOM decreased. The low temperature biochar-borne DOM was found to have more carboxyl groups than its high temperature counterparts, and thus it had larger C_L values. In contrast, the high temperature biochar-borne DOM had larger long K_M values. Low temperature biochars, if applied in a large quantity, would alter copper mobility in the environment because of their high DOM contents and large copper binding capacities.

Effect of gasification biochar application on soil quality: Trace metal behavior, microbial community, and soil dissolved organic matter

Compared to pyrolysis biochar (PBC), gasification biochar (GBC) differs in both composition and surface functionalities due to the use of an oxidizing purging gas. This work compares the effect of using PBC and GBC as soil amendments on the soil properties, trace metal bioavailability, soil microbial activity, and soil dissolved organic matter (DOM). Biochar-driven reduction of bioavailable metals does not necessarily result in a positive impact on the soil microbial growth. The DOM in the soil was strongly related to the soil microbial activity, as revealed by the strong correlation between the soil dehydrogenase activity (DHA) and soil dissolved organic carbon (r = 0.957, p <  0.01). Three identified fluorescent components (C1, C2, C3) in the soil DOM were closely associated with the soil microbial activity, for instance, with a clear positive correlation between the soil DHA and C1 (r = 0.718, p <  0.05) and a significant negative correlation between the total bacterial fatty acid methyl ester content and C3 (r = -0.768, p <  0.05). The bioavailability of Cd and Zn is not only related to the pH and surface functionalities of the biochar, but also to its aromatic carbon and inorganic mineral composition. This study further demonstrates that a fluorescence excitation-emission matrix coupled with parallel factor analysis is a useful tool to monitor changes in the soil quality after application of biochar, which is greatly relevant to the soil biota.

Fluorescence Excitation-Emission Spectroscopy: An Analytical Technique to Monitor Drugs of Addiction in Wastewater

Emerging contaminants of concern have become a serious issue for the scientific community and society more broadly in recent years due to their increasingly widespread environmental distribution and largely unknown environmental and human health impacts. This study aimed to explore the use of fluorescence excitation-emission (F-EEM) spectroscopy as an alternative analytical method to evaluate the presence of key drugs of addiction (benzoylecgonine, methamphetamine, MDMA, codeine and morphine) in wastewater treatment plants. The chemicals of interest from wastewater were extracted by mixed-mode solid phase extraction and quantified using liquid chromatography tandem mass spectrometry. The same wastewater samples were also analysed by a fluorescence spectrophotometer for fluorescence spectra at wavelengths 280–600 nm (emission) and 200–600 nm (excitation). The study also investigated the relevance of different methods for interpreting F-EEM matrices data including parallel factor analysis (PARAFAC) modelling and fluorescence regional integration technique. PARAFAC identified four components, and among them, component C2, identified at the λex/λem = 275/340 nm wavelength associated with proteinaceous compounds most likely related to tryptophan amino acid, showed significant correlation with codeine removal. MDMA and morphine were not correlated to any of the fluorescence regions. The fluorescence regions related to aromatic protein-like fluorescence were correlated significantly with drug concentration and so may offer a suitable alternative approach for monitoring drugs including benzoylecgonine, methamphetamine and codeine.

Time-resolved laser fluorescence spectroscopy of organic ligands by europium: Fluorescence quenching and lifetime properties

Time-resolved Laser Fluorescence Spectroscopy (TRLFS) has proved its usefulness in the fields of biophysics, life science and geochemistry to characterize the fluorescence probe molecule with its chemical environment. The purpose of this study is to demonstrate the applicability of this powerful technique combined with Steady-State (S-S) measurements. A multi-mode factor analysis, in particular CP/PARAFAC, was used to analyze the interaction between Europium (Eu) and Humic substances (HSs) extracted from Saint Lawrence Estuary in Canada. The Saint Lawrence system is a semi-enclosed water stream with connections to the Atlantic Ocean and is an excellent natural laboratory. CP/PARAFAC applied to fluorescence S-S data allows introspecting ligands-metal interactions and the one-site 1:1 modeling gives information about the stability constants. From the spectral signatures and decay lifetimes data given by TRLFS, one can deduce the fluorescence quenching which modifies the fluorescence and discuss its mechanisms. Results indicated a relatively strong binding ability between europium and humic substances samples (LogK value varies from 3.38 to 5.08 at pH 7.00). Using the Stern-Volmer plot, it has been concluded that static and dynamic quenching takes places in the case of salicylic acid and europium interaction while for HSs interaction only a static quenching is observed.

PARAFAC Modeling of Irradiation- and Oxidation-Induced Changes in Fluorescent Dissolved Organic Matter Extracted from Poultry Litter

Parallel factor analysis (PARAFAC) applied to fluorescence excitation emission matrices (EEMs) allows quantitative assessment of the composition of fluorescent dissolved organic matter (DOM). In this study, we fit a four-component EEM-PARAFAC model to characterize DOM extracted from poultry litter. The data set included fluorescence EEMs from 291 untreated, irradiated (253.7 nm, 310-410 nm), and oxidized (UV-H₂O₂, ozone) poultry litter extracts. The four components were identified as microbial humic-, terrestrial humic-, tyrosine-, and tryptophan-like fluorescent signatures. The Tucker's congruence coefficients for components from the global (i.e., aggregated sample set) model and local (i.e., single poultry litter source) models were greater than 0.99, suggesting that the global EEM-PARAFAC model may be suitable to study poultry litter DOM from individual sources. In general, the transformation trends of the four fluorescence components were comparable for all poultry litter sources tested. For irradiation at 253.7 nm, ozonation, and UV-H₂O₂ advanced oxidation, transformation of the humic-like components was slower than that of the tryptophan-like component. The opposite trend was observed for irradiation at 310-410 nm, due to differences in UV absorbance properties of components. Compared to the other EEM-PARAFAC components, the tyrosine-like component was fairly recalcitrant in irradiation and oxidation processes. This novel application of EEM-PARAFAC modeling provides insight into the composition and fate of agricultural DOM in natural and engineered systems.