Effect of Antimicrobial Denture Base Resin on Multi-Species Biofilm Formation

Antimicrobial activity, surface properties, and cytotoxicity of microencapsulated phytochemicals incorporated into three-dimensionally printable dental polymers

OBJECTIVES

This study aimed to investigate the antimicrobial properties of three dimensionally-printed dental polymers (3DPs) incorporated with microencapsulated phytochemicals (MPs) and to assess their surface characteristics and cytotoxicity.

METHODS

MPs derived from phytoncide oil and their specific chemical components were introduced into suspensions of three microbial species: Streptococcus gordonii, Streptococcus oralis, and Candida albicans. Optical density was measured to determine the microbial growth in the presence of MPs for testing their antimicrobial activity. MPs at 5% (w/w) were mixed with dental polymers and dispersants to 3DP discs. These microbial species were then seeded onto the discs and incubated for 24 h. The antibacterial and antifungal activities of MP-containing 3DPs were evaluated by counting the colony-forming units (n = 3). The biofilm formation on the 3DP was assessed by crystal violet staining assay (n = 3). Microbial viability was determined using a live-dead staining and CLSM observation (n = 3). Surface roughness and water contact angle were assessed (n = 10). Cytotoxicity of MP-containing 3DPs for human gingival fibroblast was evaluated by MTT assay.

RESULTS

MPs, particularly (-)-α-pinene, suppressed the growth of all tested microbial species. MP-containing 3DPs significantly reduced the colony count (P ≤ 0.001) and biofilm formation (P ≤ 0.009), of all tested microbial species. Both surface roughness (P < 0.001) and water contact angle (P < 0.001) increased. The cytotoxicity remained unchanged after incorporating MPs to the 3DPs (P = 0.310).

CONCLUSIONS

MPs effectively controlled the microbial growth on 3DPs as evidenced by the colony count, biofilm formation, and cell viability. Although MPs modified the surface characteristics, they did not influence the cytotoxicity of 3DPs.

CLINICAL SIGNIFICANCE

Integration of MPs into 3DPs could produce dental prostheses or appliances with antimicrobial properties. This approach not only provides a proactive solution to reduce the risk of oral biofilm-related infection but also ensures the safety and biocompatibility of the material, thereby improving dental care.

Applications of quaternary ammonium compounds in the prevention and treatment of oral diseases: State-of-the-art and future directions

OBJECTIVES

The aim of this review is to comprehensively summarize the state-of-the-art developments of quaternary ammonium compounds (QACs) in the prevention and treatment of oral diseases. By discussing the structural diversity and the potential killing mechanism, we try to offer some insights for the future research of QACs.

DATA, SOURCES & STUDY SELECTION

A literature search was conducted in electronic databases (Web of Science, PubMed, Medline, and Scopus). Publications that involved the applications of QACs, especially those related to the prevention and treatment of oral diseases, are included.

RESULTS

We have reviewed the relevant research on QACs over the past two decades. The research results indicate that the current applications are mainly focused on dental material modification and direct pharmacological interventions. Concurrently, challenges such as potential risks to normal tissues and impediments in drug resistance and microbial persistence present certain application constraints. The latest studies have encompassed the exploration of smart materials and nanoparticle formulations.

CONCLUSIONS

The killing mechanism may possess a threshold related to charge density. However, the exact process remains enigmatic. The structural diversity and the exploration of intelligent materials and nanoparticle formulations provide directions in development of novel QACs.

CLINICAL SIGNIFICANCE

The intricate oral anatomy, combined with the multifaceted oral microbiome, necessitates specialized materials for the targeted prevention and treatment of oral pathologies. QACs represent a cohort of compounds distinguished by potent anti-infective and anti-tumor attributes. Innovations in intelligent materials and nanoparticle formulations amplify their potential in significantly advancing the prevention and therapeutic interventions for oral diseases.

Dimethylaminododecyl Methacrylate-Incorporated Dental Materials Could Be the First Line of Defense against Helicobacter pylori

Oral cavity is an essential reservoir for H. pylori. We aimed to investigate the antibacterial effects of dimethylaminododecyl methacrylate (DMADDM) against H. pylori. Modified giomers were prepared by introducing 0%, 1.25% and 2.5% DMADDM monomers. Broth microdilution assay, spot assay, Alamer Blue assay, PMA-qPCR, crystal violet staining, scanning electron microscopy observation and live/dead bacterial staining were performed to evaluate the antibacterial and antibiofilm effects of DMADDM and modified giomers in vitro. Urease assay, qPCR, hematoxylin-eosin staining and ELISA were performed to evaluate the inflammation levels and colonization of H. pylori in vivo. In vitro experiments indicated that the minimum inhibitory concentration and minimum bactericidal concentration of DMADDM were 6.25 μg/mL and 25 μg/mL, respectively. It inhibited H. pylori in a dose- and time-dependent manner, and significantly reduced the expression of cagA, vacA, flaA and ureB. DMADDM-modified giomers inhibited the formation of H. pylori biofilm and reduced live cells within it. In vivo experiments confirmed that the pretreatment with DMADDM-modified dental resin effectively reduced the gastric colonization of oral-derived H. pylori, suppressed systemic and local gastric inflammation. DMADDM monomers and DMADDM-modified giomers possessed excellent antibacterial and antibiofilm effects on H. pylori. Pretreatment with DMADDM-modified giomers significantly inhibited the gastric infection by H. pylori.

Novel Dental Low-Shrinkage-Stress Composite with Antibacterial Dimethylaminododecyl Methacrylate Monomer

OBJECTIVES

Current dental resins exhibit polymerization shrinkage causing microleakage, which has the potential to cause recurrent caries. Our objectives were to create and characterize low-shrinkage-stress (LSS) composites with dimethylaminododecyl methacrylate (DMADDM) as an antibacterial agent to combat recurrent caries.

METHODS

Triethylene glycol divinylbenzyl ether and urethane dimethacrylate were used to reduce shrinkage stress. DMADDM was incorporated at different mass fractions (0%, 1.5%, 3%, and 5%). Flexural strength, elastic modulus, degree of conversion, polymerization stress, and antimicrobial activity were assessed.

RESULTS

The composite with 5% DMADDM demonstrated higher flexural strength than the commercial group (p < 0.05). The addition of DMADDM in BisGMA-TEGDMA resin and LSS resin achieved clinically acceptable degrees of conversion. However, LSS composites exhibited much lower polymerization shrinkage stress than BisGMA-TEGDMA composite groups (p < 0.05). The addition of 3% and 5% DMADDM showed a 6-log reduction in Streptococcus mutans (S. mutans) biofilm CFUs compared to commercial control (p < 0.001). Biofilm biomass and lactic acid were also substantially decreased via DMADDM (p < 0.05).

CONCLUSIONS

The novel LSS dental composite containing 3% DMADDM demonstrated potent antibacterial action against S. mutans biofilms and much lower polymerization shrinkage-stress, while maintaining excellent mechanical characteristics. The new composite is promising for dental applications to prevent secondary caries and increase restoration longevity.

Effects of silver nanoparticle-based antimicrobial formulations on the properties of denture polymer: A systematic review and meta-analysis of in vitro studies

STATEMENT OF PROBLEM

Denture stomatitis and other oral infections are prevalent in denture wearers and can be treated effectively with an antimicrobial agent such as a silver nanoparticle-based polymer. However, the physical properties of the denture should not be adversely affected by the addition.

PURPOSE

The purpose of this systematic review and meta-analysis of in vitro studies was to analyze the effects of a silver nanoparticle-based antimicrobial resin on the properties of polymethyl methacrylate(PMMA)-based denture resin.

MATERIAL AND METHODS

Full-length English language articles reporting silver nanoparticle-based PMMA resin were included in the review, with no limitation on the year till May 2020. Scopus, Web of Sciences, and PubMed databases were accessed for the literature survey. The review was formulated based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and used the Consolidated Standards of Reporting Trials (CONSORT) guidelines and risk of bias Cochrane tool for quality assessment. A meta-analysis of flexural strength was performed by using a random-effects model at a 95% confidence interval. The other properties were analyzed descriptively.

RESULTS

Silver nanoparticle reinforcement caused considerable differences in the inherent physical material properties of PMMA.

CONCLUSIONS

An antimicrobial polymer nanocomposite formulation can either negatively affect or bring no improvement to the physical properties of denture resin.

Prospects on Tuning Bioactive and Antimicrobial Denture Base Resin Materials: A Narrative Review

Denture base resin (DBR) materials are used in dentistry in constructing removable dentures and implant-supported prostheses. A plethora of evidence has demonstrated that DBR materials are associated with a high risk of denture stomatitis, a clinical complication where the soft oral tissues underneath the resin-based material are inflamed. The prevalence of denture stomatitis among denture wearers is high worldwide. Plaque accumulation and the infiltration of oral microbes into DBRs are among the main risk factors for denture stomatitis. The attachment of fungal species, mainly Candida albicans, to DBRs can irritate the underneath soft tissues, leading to the onset of the disease. As a result, several attempts were achieved to functionalize antimicrobial compounds and particles into DBRs to prevent microbial attachment. This review article explored the advanced approaches in designing bioactive and antimicrobial DBR materials. It was reported that using monomer mixtures, quaternary ammonium compounds (QACs), and organic and inorganic particles can suppress the growth of denture stomatitis-related pathogens. This paper also highlighted the importance of characterizing bioactive DBRs to be mechanically and physically sustainable. Future directions may implement a clinical translational model to attempt these materials inside the oral cavity.

Effect of the Modified Methacrylate-Based Root Canal Sealer in Single-Cone Technique

This study aimed to modify EndoREZ with 2.5% dimethylaminododecyl methacrylate (DMADDM) and 1% magnetic nanoparticles (MNP) to study its sealing property, penetration and long-term antibacterial and therapeutic effect in the single-cone technique (SCT) compared with EndoREZ and iRoot SP. Thirty single-root human maxillary premolars were assigned into three groups and obturated with three different root canal sealers by SCT. Every specimen was then scanned using micro-CT to analyze void fraction, and void volumes and confocal laser scanning microscope (CLSM) was used to study the dentin penetration. The long-term antimicrobial effects were tested in vitro before and after aging 1 and 4 weeks by the single-strain Enterococcus faecalis biofilm model. In addition, the beagle canine model of apical periodontitis (AP) was utilized to judge and compare the therapeutic effect of three sealers in SCT. The void fraction and void volumes of the modified root canal sealer were not significantly different from iRoot SP (p > 0.05) but were lower than EndoREZ (p < 0.05). The modified root canal sealant displayed a greater penetration, long-term antibacterial property, and treatment effect than the other groups (p < 0.05). This indicated that after being modified with DMADDM and MNP, it showed better performance in SCT.

Evaluation and comparison of flexural strength, surface roughness and porosity percentage of denture base resins incorporated with Thymoquinone and silver nano-antimicrobial agents-an in vitro study

Aim

To evaluate and compare the flexural strength, surface roughness and porosity percentage of acrylic denture base material modified with two antimicrobial agents, Thymoquinone (TQ) and Silver nanoparticles (AgNP).

Materials and methods

A total of 90 specimens were fabricated and divided into groups A, B and C with 30 specimens each. Of the 30 specimens, 10 specimens measuring 65mmx 10mmx 2.5 mm were used to study the flexural strength, 10 specimens measuring 10 mm × 20 mm × 3 mm to study surface roughness and 10 specimens measuring 10 mm × 20 mm × 3 mm to study porosity percentage. Group A specimens were made of unmodified denture base resin, group B and C were modified with 2.5% AgNP and 1% TQ respectively. The specimens were processed in the conventional manner. A universal testing machine was used to measure flexural strength and a profilometer was used to measure surface roughness. Porosity percentage was evaluated with help of a desiccator. The data obtained was subjected to statistical analyses using One-way ANOVA and the Tukey-post hoc test, with statistical significance at p ≤ 0.05.

Results

Addition of 2.5% AgNP and 1% TQ to acrylic denture base resin significantly reduced flexural strength and increased the porosity percentage (p < 0.01) but within clinically acceptable limits. No significant difference was found in the surface roughness between the various groups tested.

Conclusions

Heat cured acrylic denture base resins modified with 2.5% AgNPs,1% TQ exhibited clinically acceptable flexural strength and surface properties and could be incorporated into the denture base material as an antimicrobial agent.

Inhibitory effect of ficin on Candida albicans biofilm formation and pre-formed biofilms

BACKGROUND

To investigate the effect of ficin, a type of proteases, on Candida albicans (C. albicans) biofilm, including forming and pre-formed biofilms.

METHODS

Crystal violet tests together with colony forming unit (CFU) counts were used to detect fungal biofilm biomass. Live/dead staining of biofilms observed by confocal laser scanning microscopy was used to monitor fungal activity. Finally, gene expression of C. albicans within biofilms was assessed by qRT-PCR.

RESULTS

According to our results, biofilm biomass was dramatically reduced by ficin in both biofilm formation and pre-formed biofilms, as revealed by the crystal violet assay and CFU count (p < 0.05). Fungal activity in biofilm formation and pre-formed biofilms was not significantly influenced by ficin according to live/dead staining. Fungal polymorphism and biofilm associated gene expression were influenced by ficin, especially in groups with prominent antibiofilm effects.

CONCLUSIONS

In summary, ficin effectively inhibited C. albicans biofilm formation and detached its preformed biofilm, and it might be used to treat C. albicans biofilm associated problems.

P, Prabhu A, Das R, K J, Pai V. Synthesis, characterization, and evaluation of quaternary ammonium-based polymerizable antimicrobial monomers for prosthodontic applications

The present study aims to synthesize and characterize two quaternary ammonium (QAM) based monomers such as - dimethyl-hexadecyl-methacryloxyethyl-ammonium iodide (DHMAI) and 2-dimethyl-2-dodecyl-1-methacryloxyethyl ammonium iodine (DDMAI) and assess their cytotoxicity and antimicrobial properties. The study also aims to incorporate the optimized concentration of these monomers as copolymerizing monomers into conventional Polymethyl methacrylate (PMMA) denture base resin and evaluate their suitability for prosthetic applications. DHMAI and DDMAI monomers were synthesized through a Menschutkin reaction and their chemical structure was characterized using FT-IR and ¹H-NMR spectroscopy. Cytotoxicity was determined using Methyl Thiazolyl Tetrazolium (MTT) assay whereas antimicrobial activity was assessed using the agar-disc diffusion method. Subsequently, optimized concentrations of DHMAI or DDMAI, based on the cytotoxicity results, were added to conventional PMMA resin. Antimicrobial activity, cytotoxicity, surface hardness, and water sorption of PMMA denture base rein incorporated with DHMAI or DDMAI were evaluated. FT-IR and ¹H-NMR results confirmed the structure of monomers and copolymerization of DHMAI and DDMAI with PMMA resin. DHMAI and DDMAI monomers were found to be cytocompatible with mouse fibroblast cells up to a concentration of 5 μg/mL and 20 μg/mL respectively. In addition, incorporation of DHMAI or DDMAI at 5 μg/mL and 20 μg/mL respectively into PMMA denture base material did not affect their cytocompatibility. PMMA denture base resin incorporated with DHMAI or DDMAI significantly reduced the adhesion of microbes. Further, an increase in the surface hardness and a reduction in the water sorption was observed. Hence DHMAI and DDMAI can be considered as potential candidates for imparting antimicrobial activity to polymeric denture base materials.

Novel Giomers Incorporated with Antibacterial Quaternary Ammonium Monomers to Inhibit Secondary Caries

The objective of this study was to develop novel modified giomers by incorporating the antibacterial quaternary ammonium monomers (QAMs), dimethylaminododecyl methacrylate (DMADDM) or dimethylaminohexadecyl methacrylate (DMAHDM) into a commercial giomer. The material performances including mechanical properties, surface characteristics, color data, cytotoxicity and fluoride release of the novel giomers were evaluated. Antibacterial activity against severe early childhood caries (S-ECC) saliva-derived biofilms was assessed by lactic acid production measurement, MTT assay, biofilm staining and 16S rRNA sequencing. A rat model was developed and the anti-caries effect was investigated by micro-CT scanning and modified Keyes’ scoring. The results showed that the material properties of the QAMs groups were comparable to those of the control group. The novel giomers significantly inhibited lactic acid production and biofilm viability of S-ECC saliva-derived biofilms. Furthermore, caries-related genera such as Streptococcus and Lactobacillus reduced in QAMs groups, which showed their potential to change the microbial compositions. In the rat model, lesion depth, mineral loss and scoring of the QAMs groups were significantly reduced, without side effects on oral tissues. In conclusion, the novel giomers incorporated with antibacterial QAMs could inhibit the cariogenic biofilms and help prevent secondary caries, with great potential for future application in restorative treatment.

The Role of Glycoside Hydrolases in S. gordonii and C. albicans Interactions

Candida albicans can coaggregate with Streptococcus gordonii and cocolonize in the oral cavity. Saliva provides a vital microenvironment for close interactions of oral microorganisms. However, the level of fermentable carbohydrates in saliva is not sufficient to support the growth of multiple species. Glycoside hydrolases (GHs) that hydrolyze glycoproteins are critical for S. gordonii growth in low-fermentable-carbohydrate environments such as saliva. However, whether GHs are involved in the cross-kingdom interactions between C. albicans and S. gordonii under such conditions remains unknown. In this study, C. albicans and S. gordonii were cocultured in heart infusion broth with a low level of fermentable carbohydrate. Planktonic growth, biofilm formation, cell aggregation, and GH activities of monocultures and cocultures were examined. The results revealed that the planktonic growth of cocultured S. gordonii in a low-carbohydrate environment was elevated, while that of cocultured C. albicans was reduced. The biomass of S. gordonii in dual-species biofilms was higher than that of monocultures, while that of cocultured C. albicans was decreased. GH activity was observed in S. gordonii, and elevated activity of GHs was detected in S. gordonii-C. albicans cocultures, with elevated expression of GH-related genes of S. gordonii. By screening a mutant library of C. albicans, we identified a tec1Δ/Δ mutant strain that showed reduced ability to promote the growth and GH activities of S. gordonii compared with the wild-type strain. Altogether, the findings of this study demonstrate the involvement of GHs in the cross-kingdom metabolic interactions between C. albicans and S. gordonii in an environment with low level of fermentable carbohydrates. IMPORTANCE Cross-kingdom interactions between Candida albicans and oral streptococci such as Streptococcus gordonii have been reported. However, their interactions in a low-fermentable-carbohydrate environment like saliva is not clear. The current study revealed glycoside hydrolase-related cross-kingdom communications between S. gordonii and C. albicans under the low-fermentable-carbohydrate condition. We demonstrate that C. albicans can promote the growth and metabolic activities of S. gordonii by elevating the activities of cell-wall-anchored glycoside hydrolases of S. gordonii. C. albicans gene TEC1 is critical for this cross-kingdom metabolic communication.

Oral Colonization and Virulence Factors of Candida spp. in Babies With Cleft Palate

OBJECTIVE

To examine oral colonization and virulence factors of Candida spp. in patients aged from 0 to 18 months with cleft palate (CP).

MATERIALS AND METHODS

Sixty babies were allocated into 3 groups: CP, CP with orthodontic plate (CPwP), and control group (Ctrl) without CP. Information on feeding habits, hygiene, and history of candidosis was collected. The presence of Candida spp. was investigated in samples of saliva. Fungal hydrophobicity, protease, esterase, phospholipase, and hemolysin were evaluated in a semiquantitative manner.

RESULTS

Positive oral isolations of Candida spp. were detected in CP (89.5%), CPwP (100%), and Ctrl (44%) groups. Candidosis was more reported in the cleft groups than in the Ctrl group (P ≤ .023). There was a higher prevalence of Candida albicans, followed by Candida krusei, Candida tropicalis, and Candida parapsilosis in all groups. There was no uniformity of expression of virulence factors, either among different species or among different groups.

CONCLUSION

Candida spp. colonization occurred in all groups, being superior in CPwP group. Candidosis episodes were more reported in patients from CPwP than in other groups, although candidosis was also registered in other groups. Candida albicans was the predominant species and virulence factors did not exhibit any pattern for species or groups of patients.

Mixed biofilms of pathogenic Candida-bacteria: regulation mechanisms and treatment strategies

Mixed-species biofilm is one of the most frequently recorded clinical problems. Mixed biofilms develop as a result of interactions between microorganisms of a single or multiple species (e.g. bacteria and fungi). Candida spp., particularly Candida albicans, are known to associate with various bacterial species to form a multi-species biofilm. Mixed biofilms of Candida spp. have been previously detected in vivo and on the surfaces of many biomedical instruments. Treating infectious diseases caused by mixed biofilms of Candida and bacterial species has been challenging due to their increased resistance to antimicrobial drugs. Here, we review and discuss the clinical significance of mixed Candida-bacteria biofilms as well as the signalling mechanisms involved in Candida-bacteria interactions. We also describe possible approaches for combating infections associated with mixed biofilms, such as the use of natural or synthetic drugs and combination therapy. The review presented here is expected to contribute to the advances in the biomedical field on the understanding of underlying interaction mechanisms of pathogens in mixed biofilm, and alternative approaches to treating the related infections.

In Vitro Assessment of Artificial Aging on the Antifungal Activity of PMMA Denture Base Material Modified with ZrO2 Nanoparticles

The antifungal effect of zirconium dioxide nanoparticles (ZrO₂NPs) incorporated into denture base material has been inadequately investigated; additionally, to the authors' knowledge, no studies have assessed the influence of artificial aging on the antifungal activity of these particles. Methodology. Heat-polymerized acrylic resin disks were fabricated and divided into four groups (0%, 1%, 2.5%, and 5% ZrO₂NPs by weight). Antifungal activity was assessed using the direct culture and disk diffusion methods. Surface roughness and contact angles were measured using a profilometer and a goniometer, respectively. The artificial aging procedure was performed by repeating all tests at 7, 14, and 30 days following 2 rounds of thermocycling. Data were analyzed using ANOVA and Tukey's post-hoc test (p < 0.05). Results. The addition of ZrO₂NPs significantly decreased the adhesion of Candida albicans with and without artificial aging procedures (p < 0.001), while the disk diffusion methods did not reveal inhibition zones. ZrO₂NP-modified specimens displayed significantly higher surface roughness compared to specimens in the control group (p < 0.05) and showed the same behaviors with artificial aging procedures. The contact angle was significantly decreased in all modified groups in comparison to the control group (p < 0.05). Conclusion. The addition of ZrO₂NPs to polymethylmethacrylate denture base material reduced the adhesion of Candida albicans with a long-term antifungal effect. With the addition of ZrO₂NPs, contact angles were decreased and surface roughness was increased; 1% was the most appropriate concentration. Clinical significance. The addition of ZrO₂NPs to denture base material confers a long-term antifungal effect and could be used as a possible method for preventing and treating denture stomatitis.

Dental Restorative Materials for Elderly Populations

The incidence of dental caries, especially root caries, has risen in elderly populations in recent years. Specialized restorative materials are needed due to the specific site of root caries and the age-related changes in general and oral health in the elderly. Unfortunately, the restorative materials commonly used clinically cannot fully meet the requirements in this population. Specifically, the antibacterial, adhesive, remineralization, mechanical, and anti-aging properties of the materials need to be significantly improved for dental caries in the elderly. This review mainly discusses the strengths and weaknesses of currently available materials, including amalgam, glass ionomer cement, and light-cured composite resin, for root caries. It also reviews the studies on novel anti-caries materials divided into three groups, antimicrobial, remineralization, and self-healing materials, and explores their potential in the clinical use for caries in the elderly. Therefore, specific restorative materials for caries in the elderly, especially for root caries, need to be further developed and applied in clinical practice.

Candida albicans promotes tooth decay by inducing oral microbial dysbiosis

Candida albicans has been detected in root carious lesions. The current study aimed to explore the action of this fungal species on the microbial ecology and the pathogenesis of root caries. Here, by analyzing C. albicans in supragingival dental plaque collected from root carious lesions and sound root surfaces of root-caries subjects as well as caries-free individuals, we observed significantly increased colonization of C. albicans in root carious lesions. Further in vitro and animal studies showed that C. albicans colonization increased the cariogenicity of oral biofilm by altering its microbial ecology, leading to a polymicrobial biofilm with enhanced acidogenicity, and consequently exacerbated tooth demineralization and carious lesion severity. More importantly, we demonstrated that the cariogenicity-promoting activity of C. albicans was dependent on PHR2. Deletion of PHR2 restored microbial equilibrium and led to a less cariogenic biofilm as demonstrated by in vitro artificial caries model or in vivo root-caries rat model. Our data indicate the critical role of C. albicans infection in the occurrence of root caries. PHR2 is the major factor that determines the ecological impact and caries-promoting activity of C. albicans in a mixed microbial consortium.

Physicochemical properties, bond strength and dual-species biofilm inhibition effect of dental resin composites with branched silicone methacrylate

Dental resin composites (DRCs) with 15 wt% (EC-15%) and 20 wt% (EC-20%) synthesized branched silicone methacrylate (BSM) in resin matrix have showed anti-adhesion effect against Streptococcus mutans. With the aim to evaluate the BSM containing DRCs further, water sorption (WS), solubility (SL), mechanical properties before and after water immersion, anti-adhesion effect against dual-species, bonding strength to adhesive treated dentin, and cytotoxicity of BSM containing DRCs were investigated. DRC without BSM was used as control. The WS and SL were obtained until the mass variation of composite in distilled water kept stable. Three-point bending test was used to evaluate flexural strength (FS) and modulus (FM) of composite before and after water immersion. Mixture of Streptococcus mutans and Lactobacillus acidophilus was used to study the anti-adhesion effect against dual-species. Bonding strength of composite to adhesive treated dentin was measured through macro-shear test. Extract of composite was used to evaluate its cytotoxicity effect on L-929 mouse fibroblasts, and cell viability was obtained by MTT assay. The results showed that EC-15% and EC-20% had similar WS and SL as control (p < 0.05); After water immersion, FS and FM of all composites decreased (p < 0.05), but there was no significant difference in value of FS and FM between different groups (p > 0.05); More bacteria were recovered from the surface of control than those from the surface of EC-15% and EC-20% (p < 0.05); Extract of EC-15% was less cytotoxic (higher cell viability) than those EC-20% and control (p < 0.05). All of results revealed that incorporation of 15 wt% or 20 wt% BSM in resin matrix could endow DRC with inhibition effect on dual-species biofilm formation without impairing physiochemical properties, bonding strength to adhesive treated dentin, and cytotoxicity of DRC.

Incorporation of antimicrobial agents in denture base resin: A systematic review

STATEMENT OF PROBLEM

Denture base resins (DBRs), such as polymethyl methacrylate, are commonly used in the fabrication of removable dentures because of their physical, mechanical, and esthetic properties. However, the denture base acts as a substrate for microorganism adherence and biofilm formation, which may lead to denture stomatitis and be further complicated by fungal infections, of especial importance with geriatric and immunosuppressed patients. Therefore, methods to enhance the antimicrobial property of DBRs will be beneficial.

PURPOSE

The purpose of this systematic review was to evaluate the literature on the antimicrobial activity of DBRs incorporating antimicrobial agents or materials.

MATERIAL AND METHODS

A search of English peer-reviewed literature up to February 2019 reporting on antimicrobial activity of DBRs with respect to antimicrobial agents or materials, antimicrobial test effects and methods, and conclusion or knowledge gaps was conducted by using Embase, Google Scholar, PubMed, and Web of Science databases. Search terms included denture base resin and antibacterial, denture base resin and antifungal, and denture base resin and antimicrobial. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were applied for subsequent data analysis.

RESULTS

Of 2536 identified articles, 28 met the inclusion criteria for the systematic review. Antimicrobial materials were divided into 3 groups: antimicrobial monomer or copolymer, phytochemical or phytomedical components, and other compounds. Strategies on how to incorporate these substances into DBRs and their impact on the reduction and prevention of the growth of microorganisms were identified.

CONCLUSIONS

Although many efforts have been made to improve the antimicrobial ability of DBRs, this systematic review found that the effectiveness of incorporating of antimicrobial agents into DBRs has not been demonstrated conclusively.

Emerging Contact-Killing Antibacterial Strategies for Developing Anti-Biofilm Dental Polymeric Restorative Materials

Polymeric materials are the first choice for restoring tooth cavities, bonding tooth-colored fillings, sealing root canal systems, and many other dental restorative applications. However, polymeric materials are highly susceptible to bacterial attachment and colonization, leading to dental diseases. Many approaches have been investigated to minimize the formation of biofilms over polymeric restorative materials and at the tooth/material interfaces. Among them, contact-killing compounds have shown promising results to inhibit dental biofilms. Contact-killing compounds can be immobilized within the polymer structure, delivering a long-lasting effect with no leaching or release, thus providing advantages compared to release-based materials. This review discusses cutting-edge research on the development of contact-killing compounds in dental restorative materials to target oral pathogens. Contact-killing compounds in resin composite restorations, dental adhesives, root canal sealers, denture-based materials, and crown cements have all demonstrated promising antibacterial properties. Contact-killing restorative materials have been found to effectively inhibit the growth and activities of several oral pathogens related to dental caries, periodontal diseases, endodontic, and fungal infections. Further laboratory optimization and clinical trials using translational models are needed to confirm the clinical applicability of this new generation of contact-killing dental restorative materials.

Anti-caries effect of resin infiltrant modified by quaternary ammonium monomers

OBJECTIVES

Resin infiltrant is used in early enamel caries. However, commercial resin infiltrant lacks persistent antibacterial activity. Dimethylaminododecyl methacrylate (DMADDM) was added to resin infiltrant to give it sustainable antibacterial properties and inhibit demineralization.

METHODS

After the application of resin infiltrant to bovine enamel, cytotoxicity, surface roughness, and aesthetics were assessed. A multi-species biofilm was incubated on the enamel disk before and one month after microbial-aging. After a 48-h anaerobic incubation, biomass accumulation, metabolic activity, and lactic acid were analyzed using a crystal violet assay, an MTT (3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, and a lactic acid assay. Biofilm structure and composition were determined by live/dead staining, exopolysaccharide (EPS) staining, scanning electron microscopy (SEM), and quantitative polymerase chain reaction (qPCR). The depth and content of demineralization were tested by transverse microradiography (TMR).

RESULTS

Incorporating DMADDM did not increase the cytotoxicity or change the physical properties when the mass fraction of the DMADDM was 2.5-10 %. The modification decreased the amount of bacterial biofilm, metabolic activity, lactic acid production, EPS, and the proportion of Streptococcus mutans in the biofilms. It also provided anti-demineralization effects. The surface roughness and antibacterial ability were not changed after one month of microbial-aging.

CONCLUSION

The incorporation of DMADDM improved the antibacterial and anti-demineralization effects of the material. It demonstrated a sustained antibacterial effect.

CLINICAL SIGNIFICANCE

The antibacterial modification might be a potential choice for future clinical applications to inhibit early enamel caries.

Dimethylaminododecyl methacrylate inhibits Candida albicans and oropharyngeal candidiasis in a pH-dependent manner

The prevalence of stomatitis, especially that caused by Candida albicans, has highlighted the need for new antifungal agents. We previously found that a type of quaternary ammonium salts, dimethylaminododecyl methacrylate (DMADDM), incorporated in dental materials inhibited the growth and hyphal development of C. albicans. However, how the quaternary ammonium salts inhibited the fungal pathogens and whether the oral condition, such as salivary pH variation under different diseases, can affect the antimicrobial capacity of quaternary ammonium salts is unknown. This study evaluated the antifungal effects of DMADDM at different pH in vitro and in vivo. A pH-dependent antifungal effect of DMADDM was observed in planktonic and biofilm growth. DMADDM enhanced antifungal activity at alkaline pH. Two pH-regulated genes (PHR1/PHR2) of C. albicans were correlated with the pH-dependent antifungal effects of DMADDM. The PHR1/PHR2 genes and pH values regulated the zeta potential of C. albicans, which then influenced the binding between C. albicans cells and DMADDM. The pH-dependent antifungal activity of DMADDM was then substantiated in a murine oropharyngeal candidiasis model. We directly demonstrated that the antifungal abilities of quaternary ammonium salts relied on the cell zeta potential which affected the binding between fungal cells and quaternary ammonium salts. These findings suggest a new antifungal mechanism of quaternary ammonium under different pH and that DMADDM can be a potential antifungal agent applied in dental materials and stomatitis therapy.Key Points • DMADDM has stronger antifungal activity in alkaline than in acidic pH conditions. • The pH values and pH-regulated genes can affect the zeta potential of fungal cells. • Zeta potential of fungal cells directly affect the binding between DMADDM and cells. Graphical abstract Schematic diagram of the antifungal activities of DMADDM at different pH values.

Management of Streptococcus mutans-Candida spp. Oral Biofilms' Infections: Paving the Way for Effective Clinical Interventions

Oral diseases are considered the most common noncommunicable diseases and are related to serious local and systemic disorders. Oral pathogens can grow and spread in the oral mucosae and frequently in biomaterials (e.g., dentures or prostheses) under polymicrobial biofilms, leading to several disorders such as dental caries and periodontal disease. Biofilms harbor a complex array of interacting microbes, increasingly unapproachable to antimicrobials and with dynamic processes key to disease pathogenicity, which partially explain the gradual loss of response towards conventional therapeutic regimens. New drugs (synthesized and natural) and other therapies that have revealed promising results for the treatment or control of these mixed biofilms are presented and discussed here. A structured search of bibliographic databases was applied to include recent research. There are several promising new approaches in the treatment of Candida spp.-Streptococcus mutans oral mixed biofilms that could be clinically applied in the near future. These findings confirm the importance of developing effective therapies for oral Candida-bacterial infections.

Resumptive Streptococcus mutans Persisters Induced From Dimethylaminododecyl Methacrylate Elevated the Cariogenic Virulence by Up-Regulating the Quorum-Sensing and VicRK Pathway Genes

Bacterial persistence has become a worldwide health problem due to its ability to cause the recalcitrance and relapse of infections. The existence of bacterial persistence and their possible mechanisms have been widely reported. However, the following regrowth of persister cells is not clear although the awakening of dormant surviving persisters is the key to reinitialize bacterial infection. In this study, we investigated the growth character and cariogenic virulence during the recovery of Streptococcus mutans drug-tolerant persister cells induced by a novel quaternary ammonium: dimethylaminododecyl methacrylate (DMADDM). A remarkable lag phase was observed in S. mutans persisters when regrew at the first 24 h compared to normal cells. During the entire recovery state, persisters are metabolically active to increase the production of both water-soluble and water-insoluble glucan. The shortage of cell number in persisters resulted in the decrease of lactic acid production, but persisters gradually recovered the normal acid production ability after 72 h. The up-regulated expression of gtf and vicR was in line with comDE circuit and consistent with the virulence change during the regrowth stage. Our findings proved that lethal dosages of DMADDM induced drug-tolerant S. mutans persisters in biofilm, which had a prolonged lag phase and elevated cariogenic virulence during regrowth. The recovery and elevated virulence of persisters were regulated by quorum-sensing and VicRK pathway. This alarmed the elevated cariogenicity of persisters and highlighted the critical requirement for the drug-tolerance evaluation when developing new oral antimicrobial agents. To the best of our knowledge, we characterized the regrowth and cariogenic virulence variation of S. mutans persisters induced by quaternary ammonium for the first time. Our findings suggest that S. mutans persisters with the elevated cariogenic virulence during their regrowth stage highlighted the need of new strategy to overcome bacterial persistence. Meanwhile, the prolonged lag phase and the involvement of quorum-sensing system in the regrowth of S. mutans persisters may provide the potential targets.

A novel antibacterial resin-based root canal sealer modified by Dimethylaminododecyl Methacrylate

Persistent apical periodontitis, mainly caused by microorganisms infections, represents a critical challenge for endodontists. Dimethylaminododecyl methacrylate (DMADDM) is a well-studied and potent antibacterial agent used in various studies described in the literature. The aim of this study is to develop a novel antibacterial root canal sealer by incorporating DMADDM into EndoREZ and investigate the properties of the resulting material. Different mass fractions (0, 1.25%, 2.5%, and 5%) of DMADDM were incorporated into EndoREZ and the cytotoxicity, apical sealing ability and solubility of the resulting material were evaluated. Furthermore, a direct contact test, determination of colony-forming units, a crystal violet assay, scanning electronic microscopy and live/dead bacteria staining were performed to evaluate the antibacterial effect of the sealer to multispecies bacteria (Enterococcus faecalis, Streptococcus gordonii, Actinomyces naeslundii, and Lactobacillus acidophilus), in planktonic cells or biofilms. Fluorescence in situ hybridization and quantitative real-time polymerase chain reaction were carried out to assess the composition of the multispecies biofilms. No difference on the cytotoxicity, apical sealing ability and solubility between sealers containing DMADDM (1.25%, 2.5%) and EndoREZ (0%) could be determined. However, when the mass fraction of DMADDM increased to 5%, significantly different properties were found compared to the 0% (p < 0.05) group. Moreover, incorporating DMADDM into the sealer could greatly improve the antibacterial properties of EndoREZ. In addition, the composition ratio of E. faecalis could be decreased in multispecies microecology in sealers containing DMADDM. Therefore, a EndoREZ sealer material containing DMADDM could be considered useful in clinical applications for preventing and treating persistent apical periodontitis.

In vitro assessment of the antifungal effects of neem powder added to polymethyl methacrylate denture base material

Background

Denture with antimicrobial activities is desirable to prevent Candida albican adhesion subsequently decreasing the susceptibility of denture stomatitis incidence. Azadirachta Indica, commonly known as Neem powder has antimicrobial effect but the effect of its addition to acrylic denture base on C. albicans adhesion has not been investigated. The aim of this study was determine whether adding neem powder to acrylic denture base materials could reduce Candida albicansadhesion.

Material and Methods

One hundred and twenty acrylic resin denture specimens were fabricated and divided into heat-polymerized (n=60) and auto-polymerized (n=60) groups. Each group was further divided into 6 groups (n=10) based on the neem concentration: 0, 0.5, 1, 1.5, 2 and 2.5 wt% of the polymer. After polymerization, the specimens were polished, stored in distilled water, sonicated, sterilized, submerged in artificial saliva containing C. albicans, and finally, placed in an incubator at 37°C. Slide counting and direct culture methods were used to assess the antifungal effects of the neem addition. An analysis of variance and post hoc Tukey’s test were performed for the data analysis (p≤0.05 was statistically significant).

Results

Based on the results, the neem addition significantly decreased the C. albicans count when compared to the control group (p≤0.05). Moreover, the count decreased as the neem concentration increased (lowest count with 2.5 wt%).

Conclusions

The results suggest that adding neem powder to acrylic resin denture base materials reduces the adhesion of C. albicans; therefore, the incorporation of neem could be a possible denture stomatitis prevention method.

Key words:Denture stomatitis, Candida albicans, Azadirachta indica, neem powder, denture base.

Monomer Modifications of Denture Base Acrylic Resin: A Systematic Review and Meta-analysis

Background:

Methyl methacrylate monomer of denture base resins was modified with several monomers to achieve better physico-mechanical properties without compromising the biocompatibility. However, there are no consensuses on the best strategy to achieve best modified monomer.

Purpose:

To identify and evaluate the differences in the properties between conventional and modified monomers and to verify the influence of several variables on the properties of denture base acrylic resin.

Materials and Methods:

This study was executed by following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. In-vitro studies that investigated the properties of conventional and modified monomers were selected. Searches were carried out in the Ebscohost, PubMed, Semantic scholar and J-stage databases. The search commenced from the year 1995 and the last search was done till November 2018. A comparison was performed between modified and unmodified monomers. The analyses were carried out using fixed-effect models.

Results:

The meta-analysis results showed high heterogeneity in all aspects, and higher flexural strength for monomers modified with 20% methacrylic acid.

Conclusion:

Although the articles included in this meta-analysis showed high heterogeneity and high risk of bias, the in-vitro literature seems to suggest that use of modified monomers could improve the properties of denture base resins. Other variants of monomer modifications and their tested parameters were discussed in this systematic review as well. Dimensional accuracy is an unexplored variable to be evaluated extensively in the future researches.

Application of cationic polymer micelles for the dispersal of bacterial biofilms

Contamination of surfaces in hospitals and food industry by bacterial biofilms is a serious health risk. Of concern is their resistance to routine antibacterials and disinfectants. This requires the development of novel approaches to biofilm detachment. The study evaluates the effectiveness of cationic polymer micelles (CPMs) against pre-formed biofilms. CPMs based on different polycations were used. The hydrodynamic radius of the particles ranged from 16 to 360 nm. Biofilms of Escherichia coli 420, Pseudomonas aeruginosa PAO1, Staphylococcus aureus 29213 and Bacillus subtilis 168 were cultivated for 24 h then the pre-formed biofilms were treated with the CPMs for 2, 4 or 6 h. Biofilm biomass was evaluated by the crystal violet assay, and live/dead fluorescence test was applied for bacterial viability. The ability of CPMs to interact with pre-formed biofilms of the model strains was evaluated. We observed that the most effective CPMs were those based on poly(2-(dimethylamino)ethyl methacrylate) copolymers which reduced the biofilm biomass three- to four-fold compared with the treatment of the biofilm with water. Significantly reduced vitality of the bacteria in the biofilms was registered by the live/dead stain. The results indicate the applicability of the CPMs for disinfection of biofilm-contaminated surfaces and the treatment of wounds.

Candida Biofilms: Threats, Challenges, and Promising Strategies

Candida species are fungal pathogens known for their ability to cause superficial and systemic infections in the human host. These pathogens are able to persist inside the host due to the development of pathogenicity and multidrug resistance traits, often leading to the failure of therapeutic strategies. One specific feature of Candida species pathogenicity is their ability to form biofilms, which protects them from external factors such as host immune system defenses and antifungal drugs. This review focuses on the current threats and challenges when dealing with biofilms formed by Candida albicans, Candida glabrata, Candida tropicalis, and Candida parapsilosis, highlighting the differences between the four species. Biofilm characteristics depend on the ability of each species to produce extracellular polymeric substances (EPS) and display dimorphic growth, but also on the biofilm substratum, carbon source availability and other factors. Additionally, the transcriptional control over processes like adhesion, biofilm formation, filamentation, and EPS production displays great complexity and diversity within pathogenic yeasts of the Candida genus. These differences not only have implications in the persistence of colonization and infections but also on antifungal resistance typically found in Candida biofilm cells, potentiated by EPS, that functions as a barrier to drug diffusion, and by the overexpression of drug resistance transporters. The ability to interact with different species in in vivo Candida biofilms is also a key factor to consider when dealing with this problem. Despite many challenges, the most promising strategies that are currently available or under development to limit biofilm formation or to eradicate mature biofilms are discussed.

Quaternary ammonium-induced multidrug tolerant Streptococcus mutans persisters elevate cariogenic virulence in vitro

Dental caries are the most prevalent chronic infections in the oral cavity, and Streptococcus mutans acts as the main cariogenic bacterial species. Antibacterial quaternary ammonium compounds (QAs) have been developed to preveFnt or treat dental caries. However, there is no report on the tolerance of S. mutans to QAs. In this study, we investigated the development of S. mutans persistence induced by a novel dental caries defensive agent, dimethylaminododecyl methacrylate (DMADDM), for the first time. Typical biphasic killing kinetics for persisters were observed in both S. mutans planktonic and biofilm cultures challenged by DMADDM at concentrations of 20 and 200 μg·mL-1, respectively. The persisters tolerated six other antibiotics with different antibacterial mechanisms, while only daptomycin and vancomycin could slightly reduce the persister numbers in planktonic cultures. The distribution of persisters in DMADDM-treated biofilms was similar to that in the untreated control, except that the total biomass and biofilm height were significantly reduced. A higher exopolysaccharides (EPS):bacteria ratio was observed in DMADDM-treated biofilms. Persisters in biofilms significantly upregulated gtf gene expression, indicating an increase in the bacteria's ability to produce EPS and an elevated capability of cariogenic virulence. Carbon source metabolism was significantly reduced, as related metabolic genes were all downregulated in persisters. Concentrations of 0.1 mM, 1 mM and 10 mM of extra glucose significantly reduced the number of persisters both in planktonic and biofilm conditions. The formation of non-inheritable and multidrug tolerant persisters induced by DMADDM suggested that drug tolerance and new persistent eradication strategies should be considered for oral antibacterial agents.

In Vitro Evaluation of the Inhibitory Activity of Thymoquinone in Combatting Candida albicans in Denture Stomatitis Prevention

Candida albicans adhesion and proliferation on denture bases may lead to denture stomatitis, which is a common and recurrent problem in denture wearers. The goal of this study was to assess the inhibitory effect of thymoquinone incorporated in the polymethyl methacrylate denture base material against Candida albicans. Eighty acrylic resin specimens were fabricated and divided into eight groups (n = 10) according to thymoquinone concentrations of 0.5%, 1%, 1.5%, 2%, 2.5%, 3%, and 5% of acrylic powder. Two methods were used to evaluate the effect of thymoquinone on Candida albicans: the slide count and the serial dilution test. A multivariate analysis of variance (MANOVA) and the post-hoc Tukey’s Honestly Significant Difference (HSD) test were performed to compare the difference of means between the observations taken at various intervals with baseline. The p value was statistically significant at ≤0.05. According to the slide count and the serial dilution test, the mean number of adhered Candida albicans in the control group was 5436.9 ± 266 and 4691.4 ± 176.8; however, this number dramatically decreased to 0 ± 0 and 32.4 ± 1.7 in group 8 (concentration 5%). These results suggest that the incorporation of thymoquinone into the acrylic resin denture base material might be effective in preventing Candida albicans adhesion.

Heat-Polymerized Resin Containing Dimethylaminododecyl Methacrylate Inhibits Candida albicans Biofilm

The prevalence of stomatitis, especially caused by Candida albicans, has highlighted the need of new antifungal denture materials. This study aimed to develop an antifungal heat-curing resin containing quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM), and evaluate its physical performance and antifungal properties. The discs were prepared by incorporating DMADDM into the polymer liquid of a methyl methacrylate-based, heat-polymerizing resin at 0% (control), 5%, 10%, and 20% (w/w). Flexure strength, bond quality, surface charge density, and surface roughness were measured to evaluate the physical properties of resin. The specimens were incubated with C. albicans solution in medium to form biofilms. Then Colony-Forming Units, XTT assay, and scanning electron microscope were used to evaluate antifungal effect of DMADDM-modified resin. DMADDM modified acrylic resin had no effect on the flexural strength, bond quality, and surface roughness, but it increased the surface charge density significantly. Meanwhile, this new resin inhibited the C. albicans biofilm significantly according to the XTT assay and CFU counting. The hyphae in C. albicans biofilm also reduced in DMADDM-containing groups observed by SEM. DMADDM modified acrylic resin was effective in the inhibition of C. albicans biofilm with good physical properties.

Synthesis, Antifungal Activity, and Biocompatibility of Novel 1,4-Diazabicyclo[2.2.2]Octane (DABCO) Compounds and DABCO-Containing Denture Base Resins

The fungal pathogen Candida albicans causes a variety of oral infections, including denture stomatitis, which is characterized by inflammation of the oral mucosa in direct contact with dentures and affects a significant number of otherwise healthy denture wearers. While antifungal treatment reduces symptoms, infections are often recurrent. One strategy to address this problem is to incorporate compounds with fungicidal activities into denture materials to prevent colonization. Our laboratory synthesized novel derivatives of 1,4-diazabicyclo[2.2.2]octane (DABCO), which is an organic compound typically used as a catalyst in polymerization reactions. DABCO derivatives with different aliphatic chain lengths (DC16, DC16F, DC18, and C6DC16), as well as methacrylate monomers conjugated to DABCO compounds (DC11MAF and C2DC11MAF), were synthesized and tested for antimicrobial activity. All the compounds exhibited fungicidal activity against several Candida species at concentrations ranging between 2 and 4 μg/ml. Moreover, acrylic denture base resins fabricated to contain 1, 2, or 4 wt% DABCO compounds inhibited surface C. albicans biofilm formation, as well as fungal growth, in disc diffusion assays. Remarkably, discs (4 wt%) aged for 2 months also exhibited approximately 100% growth-inhibitory activity. While some DABCO compounds exerted intermediate to high cytotoxicity against mammalian oral cell types, DC11MAF and denture base resin discs containing 2 or 4 wt% C2DC11MAF exhibited relatively low cytotoxicity against periodontal ligament (PDL) cell and gingival fibroblast (GF) lines, as well as primary oral epithelial cells. These studies demonstrate that DABCO derivatives can be incorporated into denture materials and exert fungicidal activity with minimal cytotoxicity to mammalian cells. DC11MAF and C2DC11MAF are considered strong candidates as therapeutic or preventive alternatives against Candida-associated denture stomatitis.