Antimicrobial Chitosan Conjugates: Current Synthetic Strategies and Potential Applications

Engineered bioactive glass-chitosan hybrid for dual tissue and bone regeneration multifunctional healing

The treatment of complex wounds, particularly those arising from conditions such as diabetes or trauma, presents a significant clinical challenge. These wounds often necessitate long-term care for soft tissue and bone repair, creating an urgent need for multifunctional wound dressings. This study introduces a chitosan-silica hybrid dressing enhanced with bioactive glass (BG), specifically designed to address this need. The hybrid material achieves molecular bonding through coupling agents, with the organic chitosan component providing swelling and hemostatic effects, while the inorganic silica and BG release ions (Si4+, Ca2+), promoting tissue regeneration and bone healing. With a controlled degradation profile (lasting 3 to 6 months in-vitro), the dressing is ideal for chronic wound management. Experimental results demonstrate excellent biocompatibility, no inflammatory response, and strong hemostatic properties due to the positively charged chitosan and cations. Adding BG significantly enhances bone regeneration, positioning this chitosan-silica hybrid as a promising solution for the simultaneous repair of soft tissue and bone.

Chitosan-gallic acid conjugate with enhanced functional properties and synergistic wound healing effect

Chitosan-gallic acid conjugates were synthesized by carbodiimide method and characterized by physicochemical methods (UV-vis, FTIR, 1H NMR, TGA). The FTIR and NMR assays confirmed that the chemical interaction occurred solely due to the formation of an amide bond. It was established that by varying the ratio of the components during synthesis it is possible to obtain conjugates with desired conjugation ratio, grafting efficiency and gallic acid content up to 8.09 ± 1.72 %, 70.51 ± 9.45 % and 79.9 ± 2.4 μg gallic acid/mg chitosan, respectively. Chitosan-gallic acid conjugate with a 5 % conjugation ratio demonstrated excellent antioxidant properties: the IC50 value for ABTS radical scavenging activity was 0.0073 ± 0.0001 mg/mL. In vitro tests showed that conjugation of chitosan with gallic acid provided the antiglycemic activity of the material and its good biocompatibility. A low level of cytotoxicity was recorded in the HaCaT cell line model (IC50 was 1030.4 μg/mL). The received eco-friendly chitosan-gallic acid conjugate effectively inhibited the growth of thermophilic spore-forming bacteria G. thermodenitrificans and the resistant to classical antibiotics strain A. palidus. The results of an in vivo comparative analysis showed that chitosan-gallic acid conjugate had excellent wound healing properties due to the synergism of the polysaccharide and the natural antioxidant.

Design, characterization, and biocompatibility of chitosan-nano-hydroxyapatite/tricalcium phosphate sponges

Chitosan-based sponges, incorporating tricalcium phosphate and hydroxyapatite, are extracellular components that represent a novel and impactful advancement in bone regeneration. Their bioactive composition, porous structure, and controlled release capacity are designed to stimulate osteogenesis effectively and could enhance the interrelations of cells in tissues and organs. The objective is to manufacture and characterize chitosan (CHT)-based sponges with different concentrations of nano-hydroxyapatite (nHAP) and tricalcium phosphate (TCP), as well as evaluate their biocompatibility. Composite sponges were manufactured in different concentrations: CHT (S1), 50:30:20 (S2), 60:20:20 (S3), and 70:20:10 (S4) and characterized by FTIR-ATR, TGA, and swelling. For biocompatibility, a cell proliferation assay, hemocompatibility, alizarin red, and its bactericidal effect were performed. Main groups of CHT are detected, and the presence of phosphate groups characteristic of TCP and nHAP was confirmed by FTIR. The nHAP/TCP content was validated using the Thermo Gravimetric Analysis (TGA), and the swelling tests were carried out with simulated body fluid (SBF), which proved stable for S2 and S3. About the biocompatibility tests of the cell proliferation assay, The TCP and nHAP present in the sponges caused a significant increase in cell proliferation (up 50-80 %). In contrast, in the control sample (S1), cell proliferation decreased without becoming cytotoxic (down 25 %). The hemolysis degree was less than 2 % at the times evaluated. Using alizarin red (ARS), it was shown that the different sponges were able to increase calcium deposits by approximately 10-45 % Through the antibiogram, it is assumed that the zone of inhibition occurs about the amount of CHT present in each sponge. Incorporating nHAP/TCP into CHT sponges favors the physical and thermal stability of the material. The sponges were demonstrated to have biocompatible and osteoinductive properties.

Synthesis and characterization of 5-aminosalicylic acid-azobenzyl-chitosan conjugates-based prodrugs for the colon targeted delivery in dextran sodium sulfate (DSS)-induced ulcerative colitis

Site-specific colon drug delivery is crucial in the treatment of colon-localized diseases. In this study, prodrugs of 5-aminosalicylic acid (5-ASA), the drug of choice in ulcerative colitis (UC), were synthesized by conjugating with chitosan having molecular weights (MW) of 30, 80 and 300 kDa to achieve targeted delivery to the colon. FT-IR and UV-Vis analyses confirmed the successful synthesis and varying loading capacities of 5-ASA, with a maximum loading capacity of 11.32 ± 2.0 %. The obtained conjugates (7-9) exhibited gradual drug release characteristics, with up to 30 % of the drug content released after 24 h, in the simulated colonic fluid containing rat gastrointestinal (GI) tract homogenates, demonstrating their colon-specific and slow-release properties. The conjugates were non-toxic to normal human colon epithelial cells at concentrations up to 5-10 μg/mL, suggesting a favorable safety profile. Additionally, conjugate (7) was tested for its efficacy in a mouse model of ulcerative colitis. Necropsy results showed no significant structural changes or lesions in animals treated with conjugate (7). Histopathological analysis revealed mild, multifocal lymphoplasmacytic infiltrates and scattered eosinophils in the lamina propria, indicating a low level of inflammation. Overall, the findings suggest that 5-ASA-azobenzyl-chitosan conjugates hold promise as a potential therapeutic option for ulcerative colitis and other colon localized disorders, with minimal side effects due to reduced systemic exposure.

Drude-Lorentz classical oscillator model and Tauc's approach to study the localized density of states and energy band gap of polymer composites based on chitosan integrated with green synthesized Pb-metal complexes: Improvement of linear and non-linear optical parameters

In the current work, green-synthesized metal complexes were combined with chitosan to fabricate polymer composites with controlled optical properties. The dye extracted from green tea was enriched with ligands to capture heavy metal ions and producing metal complexes. The FTIR bands associated with chitosan reduced in intensity and shifted in position when the Pb-metal complex (Pb-MC) was inserted. The XRD pattern illustrates that chitosan transformed into an amorphous material after the insertion of Pb-MC. FESEM revealed enhanced surface roughness in CS films containing high concentration of Pb-MC particles. The optical properties indicate that the bandgap energy was reduced from 5.1 eV to 1.68 eV. Urbach energy values were correlated with the amorphous nature of the films. The Eo and Ed values estimated from W-D models were used to compute the M-1 and M-3 optical moments. The optical parameters of CS:Pb-MC, including N/m, εL, NC, μopt, ρopt, and ωp, were determined based on the Lorentz oscillator model. The Sellmeier parameters (λo and So) were successfully calculated. The determined phase (vp) and group (vg) velocities establish that the composite media are dispersive. Kirchhoff's thermal emission and surface resistance were studied for all the films. Volume and surface energy losses were determined from the data on optical dielectric properties. The susceptibilities (χ(1)), (χ(2)), and (χ(3)) correspondingly represent the linear, second-order, and third-order nonlinear optical susceptibilities.

Electron beam irradiation combined with cold plasma modification of chitosan to enhance physicochemical and functional properties

Chitosan is used in food, medicine, and other fields because of its good biocompatibility, but its solubility restricts its application, and modification treatment can reduce the stability to improve its solubility in different pH solutions. This study investigated the effects of electron beam irradiation (EBI), cold plasma (CP), and their dual modification treatments on the structural, physicochemical, and functional properties of chitosan. The results showed that single EBI, CP treatment, and dual modification treatment did not significantly change the morphological structure of chitosan. Among them, the viscosity and thermal stability of single EBI- and CP-modified chitosan was reduced. Still, the antioxidant and antibacterial properties against Staphylococcus aureus and Escherichia coli were enhanced compared to native chitosan. Meanwhile, the viscosity, molecular weight, and thermal stability of dual-modified treated chitosan were further reduced, and the antioxidant and antibacterial properties were significantly improved compared to EBI and CP modification alone. This study shows that dual modification's effect was better than that of single modification treatment, especially single cold plasma treatment. This will also lead to the diversification of chitosan modification methods and promote its application in various aspects, such as preservation, food additives, functional food ingredients, and packaging materials.

Green approach to synthesis polymer composites based on chitosan with desired linear and non-linear optical characteristics

The current study used sustainable and green approaches to convey polymer composites with desired optical properties. The extracted green tea dye (GTD) enriched with ligands was used to synthesize zinc metal complexes. Green chitosan biopolymer incorporated with green synthesized metal complex using casting technique was used to deliver polymer composites with improved optical properties. The FTIR-ATR was used to identify the functional groups of the GTD, pure CS, and functional groups surrounding the synthesized zinc metal complex. Distinguished ATR bands were observed in green tea dye spectra, such as OH, C = O, and NH functional groups ascribed to various polyphenols. The ATR bands of the zinc metal complex compared to GDT established that GDT is crucial to capturing zinc cations and producing the Zn2+-metal complex. The broadness of the bands observed in CS-based composites inserted with the Zn2+- metal complex confirms strong interaction among the components of polymer composites. The XRD achievements confirm that CS films with different Zn2+- metal complex concentrations transferred to an amorphous composite. The XRD pattern of composite films establishes that the zinc metal complex scarified the crystalline phases of chitosan. Linear optical properties such as absorption, refractive index (n), and optical dielectric parameters were improved. The absorption edge of the composite's films shifted to lower photon energies. Various models were used to determine the optical band gap. The band gap drops from [Formula: see text] when chitosan is loaded with a 36% Zn2+-metal complex. The Spitzer-Fan method is used to get the dielectric constant, and the Drude Lorentz oscillator model was used to calculate vital optical parameters, including N/m*, τ, and µopt. The W-D single oscillator model was used to determine the Eo and Ed parameters. The values of optical moments (M-1 and M-3) were calculated with the help of the W-D model. The oscillator's strength ([Formula: see text]) and wavelength ([Formula: see text]) were determined via the Sellmeier model using the linear refractive index. The first-order nonlinear ( [Formula: see text]), second-order non-linear ([Formula: see text]) and third-order nonlinear optical susceptibility ([Formula: see text]) were determined for all the films.

Exploring the Potential of Chitosan-Phytochemical Composites in Preventing the Contamination of Antibiotic-Resistant Bacteria on Food Surfaces: A Review

The escalating presence of antibiotic-resistant bacteria (ARB) in food systems presents a pressing challenge, particularly in preventing contamination and ensuring food safety. Traditional sanitation methods, such as cooking and chemical disinfectants, provide effective means to reduce ARB, yet there is a growing need for additional preventive measures directly on food surfaces. This review explores the potential of chitosan-phytochemical composites (CPCs) as surface coatings to prevent the initial contamination of food by ARB, thereby offering a novel complementary approach to conventional food safety practices. Chitosan, combined with active plant-derived metabolites (phytochemicals), forms composites with notable antibacterial and antioxidant properties that enhance its protective effects. We examine CPC synthesis methodologies, including chemical modifications, free radical-induced grafting, and enzyme-mediated techniques, which enhance the stability and activity of CPCs against ARB. Highlighting recent findings on CPCs' antibacterial efficacy through minimum inhibitory concentrations (MIC) and zones of inhibition, this review underscores its potential to reduce ARB contamination risks on food surfaces, particularly in seafood, meat, and postharvest products. The insights provided here aim to encourage future strategies leveraging CPCs as a preventative surface treatment to mitigate ARB in food production and processing environments.

Chitosan and Its Nanoparticles: A Multifaceted Approach to Antibacterial Applications

Chitosan, a multifaceted amino polysaccharide biopolymer derived from chitin, has extensive antibacterial efficacy against diverse pathogenic microorganisms, including both Gram-negative and Gram-positive bacteria, in addition to fungi. Over the course of the last several decades, chitosan nanoparticles (NPs), which are polymeric and bio-based, have garnered a great deal of interest as efficient antibacterial agents. This is mostly due to the fact that they are used in a wide variety of applications, including medical treatments, food, chemicals, and agricultural products. Within the context of the antibacterial mechanism of chitosan and chitosan NPs, we present a review that provides an overview of the synthesis methods, including novel procedures, and compiles the applications that have been developed in the field of biomedicine. These applications include wound healing, drug delivery, dental treatment, water purification, agriculture, and food preservation. In addition to this, we focus on the mechanisms of action and the factors that determine the antibacterial activity of chitosan and its derivatives. In conjunction with this line of inquiry, researchers are strongly urged to concentrate their efforts on developing novel and ground-breaking applications of chitosan NPs.

Gallic acid-guar gum and chitosan-based polyelectrolyte complex film exhibited enhanced wound healing in full-thickness excision wound model

Recently, there has been a great interest in the development of innovative wound dressing materials based on natural bioactives, as they can accelerate the healing process and address the issues related to traditional wound dressings. The current study focuses on developing a novel derivative of guar gum (GG) and gallic acid (GA) using a simple, free radical-mediated polymerization reaction aimed at enhancing the antioxidant properties of GG. Multiple spectroscopic investigations were performed to validate the GA-GG conjugate. NMR and FTIR confirmed GA integration, UV spectroscopy indicated changes in electronic transition, DSC analysis suggested a reduction in crystallinity, and XRD revealed structural modifications. SEM revealed a porous structure that reflected its polymerized nature. Due to inadequate mechanical strength and film-forming ability of the synthesized GA-GG conjugate, polyelectrolyte complexation method using chitosan was explored to form a polyelectrolyte complex (PEC) film. The film exhibited a high swelling rate, excellent antioxidant properties, and was both hemocompatible and exhibited improved antimicrobial properties. In vitro, in ovo, and in vivo characterizations were performed to compare the performance of these biocomposite films to those of their counterparts. It promoted angiogenesis in the chick yolk sac membrane and demonstrated good cytocompatibility in cell proliferation studies on the viability of the L929 mouse fibroblast cell line. In vivo wound healing efficacy of the PEC film in wound closure was 94.5% as compared to the untreated disease control group (p < 0.001). This work highlights the development of an innovative GA-GG conjugate/chitosan PEC-based film with significant potential for wound healing applications.

Advances in Chitosan Derivatives: Preparation, Properties and Applications in Pharmacy and Medicine

Chitosan (CS) derivatives have been extensively investigated to enhance the physicochemical and biological properties of CS, such as its solubility, biocompatibility, and bioactivity, which are required in various areas of pharmacy and medicine. The present work emphasizes the ongoing research and development in this field, suggesting that the further exploration of CS derivatives could lead to innovative solutions that benefit society. The physicochemical properties, biological activities, methods of preparation, advantages, limitations, intended application areas, and realized practical implementations of particular CS derivatives are summarized and discussed herein. Despite the numerous promising attributes of CS derivatives as reported in this paper, however, challenges like target selectivity, standardization (purity, chitosan structural variability), and cost-effectiveness still need addressing for widespread implementation, especially in drug delivery. Therefore, basic research studies still prevail in CS drug delivery systems. However, for specific applications such as wound healing and tissue engineering, implementations of CS derivatives in practice are found to be more frequent. To obtain a more complex view of the topic, information from the scientific papers reviewed is supplemented with information from actual patents and clinical studies. Both basic research advances and the most successful and important medical implementations of CS derivatives are discussed concerning further challenges and future perspectives.

Mussel-inspired chitosan and its applications in the biomedical field

Chitosan (CS) has physicochemical properties including solubility, crystallinity, swellability, viscosity, and cohesion, along with biological properties like biocompatibility, biodegradation, antioxidant, antibacterial, and antitumor effects. However, these characteristics of CS are greatly affected by its degree of deacetylation, molecular weight, pH and other factors, which limits the application of CS in biomedicine. The modification of CS with catechol-containing substances inspired by mussels can not only improve these properties of CS, but also endow it with self-healing property, providing an environmentally friendly and sustainable way to promote the application of CS in biomedicine. In this paper, the properties of CS and its limitation in the biomedical filed are introduced in detail. Then, the modification methods and properties of substances with catechol groups inspired by mussels on CS are reviewed. Finally, the applications of modified CS in the biomedical field of wound healing, drug delivery, anticancer therapy, biosensor and 3D printing are further discussed. This review can provide valuable information for the design and exploitation of mussel-inspired CS in the biomedical field.

Insight into divergent chemical modifications of chitosan biopolymer: Review

Chitosan is used in many applications due to its biodegradability, biocompatibility, nontoxicity, nonadhesiveness, and film-forming capabilities. Chitosan has antibacterial and antifungal activities, which are two of its other desirable attributes. However, chitosan can only dissolve in acidic liquids (1-3 % acetic acid), limiting its practical application. The hydroxyl and amino functional groups in the chitosan backbone are essential for chemical modification, which is a viable alternative for overcoming this obstacle. So, N- or O-, and N, O-substituted chitosan may yield derivatives with increased water solubility, biocompatibility, biodegradability, and bio-evaluation. In the same manner, the physicochemical properties of chitosan, including its mechanical and thermal properties, can be improved by cross-linking reactions. This review provides an overview of chitosan, including its origins and their solubility. Also, the review extend and discuss in details most of all chemical reactions that happened on the amino group, hydroxyl group, or both amino group and hydroxyl group to create modified chitosan-based organic materials. Finally, the problems that still need to be solved and probable future areas for study are discussed.

A facile Immunoregulatory Constructional Design by Proanthocyanidin Optimizing Directional Chitosan Microchannel

Improving the interconnected structure and bioregulatory function of natural chitosan is beneficial for optimizing its performance in bone regeneration. Here, a facile immunoregulatory constructional design is proposed for developing instructive chitosan by directional freezing and alkaline salting out. The molecular dynamics simulation confirmed the assembly kinetics and structural features of various polyphenols and chitosan molecules. Along with the in vitro anti-inflammatory, antioxidative, promoting bone mesenchymal stem cell (BMSC) adhesion and proliferation performance, proanthocyanidin optimizing chitosan (ChiO) scaffold presented an optimal immunoregulatory structure with the directional microchannel. Transcriptome analysis in vitro further revealed the cytoskeleton- and immune-regulation effect of ChiO are the key mechanism of action on BMSC. The rabbit cranial defect model (Φ = 10 mm) after 12 weeks of implantation confirmed the significantly enhanced bone reconstitution. This facile immunoregulatory directional microchannel design provides effective guidance for developing inducible chitosan scaffolds.

Improved antioxidant and anti-tubercular potential of liquiritigenin grafted on low molecular weight chitosan from gladius of Sepioteuthis lessoniana

Chitosan (CH) is natural abundant biopolymer present on earth after cellulose. CH can be functionalized by numerous functional groups such as amino and carboxyl groups, potential biologically active compounds. The functionalization of CH with polyphenols had a greater biological than non-grafted CH. In the present study, the polyphenolic compound liquiritigenin (LTG) is chemically functionalized on the low molecular weight chitosan (LMW-CH) (693.09 Da). This was extracted and irradiated with gamma radiation from the gladius of Sepioteuthis lessoniana. The grafted compound was to in vitro anti-oxidant employing physicochemical methods and characterization was made by spectroscopic methods. The degree of deacetylation (DDA) of the LMW-CH was detected in 74 % of the samples, and at higher concentrations (100 g/mL). LMW-CH grafted with LTG had improved water solubility (5 mg/mL), and was thermally stable upto 143.58 °C. Its molecular weight was 855.1 Da. In conclusion the in vitro antioxidant and the anti-tuberculosis (anti-TB) properties of the grafted samples were significantly (P < 0.001) increased compared to the unconjugated LMW-CH and LTG. Overall, functionalization of LTG with LMW-CH improved the anti-tuberculosis activity. Further studies are needed to explore the possibilities of its use in vivo models.

Antifungal efficacy of chitosan extracted from shrimp shell on strawberry (Fragaria × ananassa) postharvest spoilage fungi

The strong demand for biological materials in the food industry places chitosan at the forefront of other biopolymers. The present study aims to evaluate the antifungal properties of chitosan extracted from shrimp shell waste (Parapenaeus longirostris) against post-harvest strawberry (Fragaria × ananassa) spoilage fungi. The physicochemical characteristics (DD, Mw, and solubility) of extracted chitosan were determined. In addition, functional characteristics were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The antifungal effect of chitosan on mycelial growth and spore germination of Aspergillus niger, Botrytis cinerea, Fusarium oxysporum, and Rhizopus stolonifer was evaluated. Yield, degree of deacetylation, molecular weight, and solubility were 21.86%, 83.50%, 180 kDa, and 80.10%, respectively. A degree of deacetylation of 81.27% was calculated from the FTIR spectrum and a crystallinity index of 79.83% was determined from the X-ray diffraction pattern. SEM images of extracted chitosan showed a combination of fibrous and porous structure. At 3% chitosan, mycelial growth inhibition rates of A. niger, B. cinerea, F. oxysporum, and R. stolonifer ranged from 81.37% to 92.70%. At the same chitosan concentration, the percentages of spore germination inhibition of the isolated fungi ranged from 65.47% to 71.48%. The antifungal activity was highly dose-dependent. As a natural polymer, chitosan offers a convincing alternative to synthetic antimicrobials for the post-harvest preservation of strawberries. Its potential lies in its ability to inhibit the growth of spoilage fungi.

Chitosan nanoparticle applications in dentistry: a sustainable biopolymer

The epoch of Nano-biomaterials and their application in the field of medicine and dentistry has been long-lived. The application of nanotechnology is extensively used in diagnosis and treatment aspects of oral diseases. The nanomaterials and its structures are being widely involved in the production of medicines and drugs used for the treatment of oral diseases like periodontitis, oral carcinoma, etc. and helps in maintaining the longevity of oral health. Chitosan is a naturally occurring biopolymer derived from chitin which is seen commonly in arthropods. Chitosan nanoparticles are the latest in the trend of nanoparticles used in dentistry and are becoming the most wanted biopolymer for use toward therapeutic interventions. Literature search has also shown that chitosan nanoparticles have anti-tumor effects. This review highlights the various aspects of chitosan nanoparticles and their implications in dentistry.

Functionalized PLGA Microsphere Loaded with Fusion Peptide for Therapy of Bone Defects

The challenges in the treatment of extensive bone defects are infection control and bone regeneration. Bone tissue engineering is currently one of the most promising strategies. In this study, a short biopeptide with specific osteogenic ability is designed by fusion peptide technology and encapsulated with chitosan-modified poly(lactic acid-glycolic acid) (PLGA) microspheres. The fusion peptide (FP) mainly consists of an osteogenic functional sequence (P-15) and a bone-specific binding sequence (Asp-6), which can regulate bone formation accurately and efficiently. Chitosan-modified PLGA with antimicrobial and pro-healing effects is used to achieve the sustained release of fusion peptides. In the early stage, the antimicrobial and soft tissue healing effects can stop the wound infection as soon as possible, which is relevant for the subsequent bone regeneration process. Our data show that CS-PLGA@FP microspheres have antibacterial and pro-cell migration effects in vitro and excellent pro-wound-healing effects in vivo. In addition, CS-PLGA@FP microspheres promote the expression of osteogenic-related factors and show excellent bone regeneration in a rat defect model. Therefore, CS-PLGA@FP microspheres are an efficient biomaterial that can accelerate the recovery of bone defects.

Effect of Chitosan and Its Water-Soluble Derivatives on Antioxidant Activity

The antioxidant activity of chitosan (CS) and three water-soluble derivatives was analyzed comparatively by in vitro and in vivo experiments, including hydroxypropyl chitosan (HPCS), quaternary ammonium salt of chitosan (HACC), and carboxymethyl chitosan (CMCS). The results show that chitosan and its water-soluble derivatives have a scavenging ability on DPPH radicals, superoxide radicals, and hydroxyl radicals, and a reducing ability. A remarkable difference (p < 0.05) was found for HACC and HPCS compared with CS on DPPH radicals, hydroxyl radicals, and reducing ability. The antioxidant ability of the four chitosan samples was in the order of HPCS > HACC > CMCS > CS. Furthermore, antioxidant activity of all samples increased gradually in a concentration-dependent manner. The in vivo result indicates that oral CS and its derivatives samples result in a decrease in lipid peroxides (LPO) and free fatty acids (FFA) levels in serum with an increase in superoxide dismutase (SOD) activity. Especially for the HPCS and HACC groups, the LPO, FFA, and SOD activity in serum was different significantly in comparison with the high-fat controlgroup (HF) (p < 0.05). These results indicate that chitosan and its derivatives can be used as good antioxidants, and the antioxidant activity might be related to the molecular structure of chitosan derivatives.

Poly(vinyl alcohol)/chitosan hydrogel incorporating chitooligosaccharide-gentisic acid conjugate with antioxidant and antibacterial properties as a potential wound dressing

The design and development of wound dressing with antioxidant and antibacterial properties to accelerate wound healing remain challenging. In this study, we synthesize a chitooligosaccharide-gentisic acid (COS-GSA) conjugate using the free-radical grafting method, and fabricate a poly(vinyl alcohol) (PVA)/chitosan (CH)/COS-GSA (PVA/CH/CG) hydrogel using a freeze-thaw method. We characterize the synthesized COS-GSA conjugates using through polyphenol assay, absorbance, and 1H NMR spectroscopy and evaluate their antioxidant properties. The COS-GSA conjugates are successfully synthesized and exhibit better antioxidant properties than pristine COSs. Subsequently, the fabricated hydrogel is characterized based on its morphological analysis, rheological properties, water contact angle, swelling, degradation, water retention properties, and COS-GSA release profiles. Finally, the biocompatibility of the fabricated hydrogel is evaluated on HDF and HaCaT cells through indirect and direct cytotoxicity. The PVA/CH/CG hydrogel exhibited significantly higher antioxidant properties (DPPH, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and hydrogen peroxide (H2O2) scavenging activities) and antibacterial activities (Staphylococcus aureus and Pseudomonas aeruginosa) compared to other fabricated hydrogels such as PVA, PVA/CH, and PVA/CH/COS (PVA/CH/C). These results provide evidence that PVA/CH/CG hydrogels with antioxidant, antibacterial, and non-cytotoxic properties have great potential for wound-dressing applications.

Dual functional quaternary chitosans with thermoresponsive behavior: structure-activity relationships in antibacterial activity and biocompatibility

Cationically modified chitosan derivatives exhibit a range of appealing characteristics, with a particular emphasis on their antimicrobial potential across a broad spectrum of biomedical applications. This study aimed to delve deeper into quaternary chitosan (QC) derivatives. Through the synthesis of both homogeneously and heterogeneously dual-quaternized chitosan (DQC), utilizing AETMAC ([2-(acryloyloxy)ethyl]-trimethylammonium chloride) and GTMAC (glycidyl trimethylammonium chloride), a permanent charge was established, spanning a wide pH range. We assessed structural differences, the type of quaternary functional group, molecular weight (Mw), and charge density. Intriguingly, an upper critical solution temperature (UCST) behavior was observed in AETMAC-functionalized QC. To our knowledge, it is a novel discovery in cationically functionalized chitosan. These materials demonstrated excellent antimicrobial efficacy against model test organisms E. coli and P. syringae. Furthermore, we detected concentration-dependent cytotoxicity in NIH-3T3 fibroblasts. Striking a balance between antimicrobial activity and cytotoxicity becomes a crucial factor in application feasibility. AETMAC-functionalized chitosan emerges as the top performer in terms of overall antibacterial effectiveness, possibly owing to factors like molecular weight, charge characteristics, and variations in the quaternary linker. Quaternary chitosan derivatives, with their excellent antibacterial attributes, hold significant promise as antibacterial or sanitizing agents, as well as across a broad spectrum of biomedical and environmental contexts.

Formulation and antibacterial properties of lollipops containing of chitosan- zinc oxide nano particles on planktonic and biofilm forms of Streptococcus mutans and Lactobacillus acidophilus

This study aimed to formulate and characterize the experimental lollipops containing chitosan- zinc oxide nanoparticles (CH-ZnO NPs) and investigate their antimicrobial effects against some cariogenic bacteria. The CH-ZnO NPs were synthesized and characterized by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) analysis, and Transmission electron microscope (TEM). Then, four groups were made, including lollipops coated with 2 and 4 ml of CH-ZnO NPs, 0.7 ml CH-ZnO NPs incorporated lollipops, and those with no CH-ZnO NPs. Their antibacterial effectiveness against Streptococcus mutans and Lactobacillus acidophilus was evaluated by direct contact test and tissue culture plate method in planktonic and biofilm phases, respectively. Chlorhexidine mouthrinse (CHX) was used as a positive control group. In the planktonic phase, the antibacterial properties of both groups coated with CH-ZnO NPs were comparable and significantly higher than incorporated ones. There was no significant difference between CHX and the lollipops coated with 4 ml of NPs against S. mutans and CHX and two coated groups against L. acidophilus. None of the experimental lollipops in the biofilm phase could reduce both bacteria counts. The experimental lollipops coated with 2 and 4 ml of CH-ZnO NPs could reveal favorable antimicrobial properties against two cariogenic bacteria in the planktonic phase.

Complex Evaluation of Nanocomposite-Based Hydroxyapatite for Biomedical Applications

A magnesium-doped hydroxyapatite in chitosan matrix (MgHApC) sample was developed as a potential platform for numerous applications in the pharmaceutical, medical, and food industries. Magnesium-doped hydroxyapatite suspensions in the chitosan matrix were obtained by the coprecipitation technique. The surface shape and morphological features were determined by scanning electron microscopy (SEM). The hydrodynamic diameter of the suspended particles was determined by Dynamic light scattering (DLS) measurements. The stability of MgHApC suspensions was evaluated by ultrasonic measurements. The hydrodynamic diameter of the MgHApC particles in suspension was 29.5 nm. The diameter of MgHApC particles calculated from SEM was 12.5 ± 2 nm. Following the SEM observations, it was seen that the MgHApC particles have a spherical shape. The Fourier-transform infrared spectroscopy (FTIR) studies conducted on MgHApC proved the presence of chitosan and hydroxyapatite in the studied specimens. In vitro antimicrobial assays were performed on Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231 microbial strains. The antimicrobial experiments showed that MgHApC exhibited very good antimicrobial properties against all the tested microorganisms. More than that, the results of the in vitro studies revealed that the antimicrobial properties of the samples depend on the incubation time. The evaluation of the sample's cytotoxicity was performed using the human colon cancer (HCT-8) cell line. Our results suggested the great potential of MgHApC to be used in future applications in the field of biomedical applications (e.g., dentistry, orthopedics, etc.).

A New and Rapid HPLC Method to Determine the Degree of Deacetylation of Glutaraldehyde-Cross-Linked Chitosan

Chitosan is a linear biopolymer composed of D-glucosamine and N-acetylglucosamine units. The percentage of D-glucosamine in the polymeric chain can vary from one sample to another and is expressed as the degree of deacetylation (DDA). Since this parameter has an impact on many properties, its determination is often critical, and potentiometric titration is a common analytical technique to measure the DDA. Cross-linking with glutaraldehyde is one of the most explored modifications of chitosan; however, the determination of the DDA for the resulting reticulated chitosan resins can be challenging. In this paper, we report a new, rapid, and efficient method to determine the DDA of glutaraldehyde-cross-linked chitosan resins via HPLC. This method relies on the use of 2,4-dinitrophenylhydrazine (DNPH) as a derivatizing agent to measure the level of reticulation of the polymer (LR) after the reticulation step. In this study, we prepare three calibration curves (with an R2 value over 0.92) for three series of reticulated polymers covering a large range of reticulation levels to demonstrate that a correlation can be established between the LR established via HPLC and the DDA obtained via titration. The polymers are derived from three different chitosan starting materials. These standard calibration curves are now used on a routine basis in our lab, and the HPLC method has allowed us to change our DDA analysis time from 20 h to 5 min.

Synthesis and Characterization of Antibacterial Chitosan Films with Ciprofloxacin in Acidic Conditions

This work presents the results of research on obtaining chitosan (CS) films containing on their surface ciprofloxacin (CIP). A unique structure was obtained that not only gives new properties to the films, but also changes the way of coverage and structure of the surface. The spectroscopic test showed that in the process of application of CIP on the surface of CS film, CIP was converted from its crystalline form to an amorphic one, hence improving its bioavailability. This improved its scope of microbiological effect. The research was carried out on the reduction of CIP concentration during the process of CIP adhesion to the surface of chitosan films. The antibacterial activity of the CS films with and without the drug was evaluated in relation to Escherichia coli and Staphylococcus aureus, as well as Candida albicans and Penicillium expansum. Changes in the morphology and roughness of membrane surfaces after the antibacterial molecule adhesion process were tested with atomic force microscopy (AFM) and scanning electron microscopy (SEM). Structural analysis of CS and its modifications were confirmed with Fourier-transform spectroscopy in the infrared by an attenuated total reflectance of IR radiation (FTIR-ATR) and solid-state nuclear magnetic resonance (NMR).

Free Radical-Mediated Grafting of Natural Polysaccharides Such as Chitosan, Starch, Inulin, and Pectin with Some Polyphenols: Synthesis, Structural Characterization, Bioactivities, and Applications-A Review

Polyphenols and polysaccharides are very important natural products with special physicochemical properties and extensive biological activities. Recently, polyphenol-polysaccharide conjugates have been synthesized to overcome the limitations of polysaccharides and broaden their application range. Grafted copolymers are produced through chemical coupling, enzyme-mediated, and free radical-mediated methods, among which the free radical-induced grafting reaction is the most cost-effective, ecofriendly, safe, and plausible approach. Here, we review the grafting reactions of polysaccharides mediated by free radicals with various bioactive polyphenols, such as gallic acid (GA), ferulic acid (FA), and catechins. A detailed introduction of the methods and their mechanisms for free radical-mediated grafting is given. Structural characterization methods of the graft products, including thin-layer chromatography (TLC), ultraviolet-visible (UV-vis) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) analysis, and X-ray diffraction (XRD) are introduced. Furthermore, the biological properties of polyphenol-polysaccharide conjugates are also presented, including antioxidant, antibacterial, antidiabetic, and neuroprotection activities, etc. Moreover, the potential applications of polyphenol-polysaccharide conjugates are described. Finally, the challenges and research prospects of graft products are summarized.

Antioxidant, anti-inflammatory and antimicrobial activity of natural products in periodontal disease: a comprehensive review

Periodontal diseases (PD) are common chronic inflammatory oral pathologies that are strongly linked to others not found in the mouth cavity. The immune system mediates the host response, which includes the upregulation of proinflammatory cytokines, metalloproteinases, and reactive oxygen species (ROS); the latter may play an important role in the establishment and progression of inflammatory diseases, particularly periodontal disease, via the development of oxidative stress (OS). Natural antioxidants have powerful anti-inflammatory properties, and some can reduce serum levels of key PD indicators such tumor necrosis factor (TNF) and interleukin IL-1. This review compiles, through a thorough literature analysis, the antioxidant, anti-inflammatory, and antibacterial effects of a variety of natural products, as well as their therapeutic potential in the treatment of PD.

A Review of Chitosan and Chitosan Nanofiber: Preparation, Characterization, and Its Potential Applications

Chitosan is produced by deacetylating the abundant natural chitin polymer. It has been employed in a variety of applications due to its unique solubility as well as its chemical and biological properties. In addition to being biodegradable and biocompatible, it also possesses a lot of reactive amino side groups that allow for chemical modification and the creation of a wide range of useful derivatives. The physical and chemical characteristics of chitosan, as well as how it is used in the food, environmental, and medical industries, have all been covered in a number of academic publications. Chitosan offers a wide range of possibilities in environmentally friendly textile processes because of its superior absorption and biological characteristics. Chitosan has the ability to give textile fibers and fabrics antibacterial, antiviral, anti-odor, and other biological functions. One of the most well-known and frequently used methods to create nanofibers is electrospinning. This technique is adaptable and effective for creating continuous nanofibers. In the field of biomaterials, new materials include nanofibers made of chitosan. Numerous medications, including antibiotics, chemotherapeutic agents, proteins, and analgesics for inflammatory pain, have been successfully loaded onto electro-spun nanofibers, according to recent investigations. Chitosan nanofibers have several exceptional qualities that make them ideal for use in important pharmaceutical applications, such as tissue engineering, drug delivery systems, wound dressing, and enzyme immobilization. The preparation of chitosan nanofibers, followed by a discussion of the biocompatibility and degradation of chitosan nanofibers, followed by a description of how to load the drug into the nanofibers, are the first issues highlighted by this review of chitosan nanofibers in drug delivery applications. The main uses of chitosan nanofibers in drug delivery systems will be discussed last.

Quaternized Chitosan Derivatives as Viable Antiviral Agents: Structure-Activity Correlations and Mechanisms of Action

Cationic polysaccharides have demonstrated significant antimicrobial properties and have great potential in medical applications, where the antiviral activity is of great interest. As of today, alcohols and oxidizing agents are commonly used as antiviral disinfectants. However, these compounds are not environmentally safe, have short activity periods, and may cause health issues. Therefore, this study aimed to develop metal-free and environmentally friendly quaternary chitosans (QCs) with excellent long-lasting virucidal activity. To evaluate this, both single and double QCs were obtained using AETMAC ([2-(acryloyloxy)ethyl]-trimethylammonium chloride) and GTMAC (glycidyl trimethylammonium chloride) quaternary precursors. Further, this study investigated the influence of the quaternary functional group, charge density, and molecular weight (M_w) on the antiviral properties of QCs. It is proposed that the higher charge density, along with the length of alkyl linkers, and hydrophobic interactions affected the antiviral activity of QCs. The findings demonstrated that heterogeneously functionalized chitosan exhibited excellent antiviral activity against both the enveloped virus φ6 and the nonenveloped viruses φX174 and MS2. These quaternized chitosan derivatives have promising potential as viable antiviral agents, as hand/surface sanitizers, or in other biomedical applications.

Recent advances in biomimetic hemostatic materials

Although the past decade has witnessed unprecedented medical advances, achieving rapid and effective hemostasis remains challenging. Uncontrolled bleeding and wound infections continue to plague healthcare providers, increasing the risk of death. Various types of hemostatic materials are nowadays used during clinical practice but have many limitations, including poor biocompatibility, toxicity and biodegradability. Recently, there has been a burgeoning interest in organisms that stick to objects or produce sticky substances. Indeed, applying biological adhesion properties to hemostatic materials remains an interesting approach. This paper reviews the biological behavior, bionics, and mechanisms related to hemostasis. Furthermore, this paper covers the benefits, challenges and prospects of biomimetic hemostatic materials.

Exploring the Antimicrobial and Antitumoral Activities of Naphthoquinone-Grafted Chitosans

Biopolymers obtained from natural macromolecules are noteworthy among materials presenting high biocompatibility and adequate biodegradability, as is the case of chitosan (CS), making this biopolymeric compound a suitable drug delivery system. Herein, chemically-modified CS were synthetized using 2,3-dichloro-1,4-naphthoquinone (1,4-NQ) and the sodium salt of 1,2-naphthoquinone-4-sulfonic acid (1,2-NQ), producing 1,4-NQ-CS and 1,2-NQ-CS by three different methods, employing an ethanol and water mixture (EtOH:H2O), EtOH:H2O plus triethylamine and dimethylformamide. The highest substitution degree (SD) of 0.12 was achieved using water/ethanol and triethylamine as the base for 1,4-NQ-CS and 0.54 for 1,2-NQ-CS. All synthesized products were characterized by FTIR, elemental analysis, SEM, TGA, DSC, Raman, and solid-state NMR, confirming the CS modification with 1,4-NQ and 1,2-NQ. Chitosan grafting to 1,4-NQ displayed superior antimicrobial activities against Staphylococcus aureus and Staphylococcus epidermidis associated with improved cytotoxicity and efficacy, indicated by high therapeutic indices, ensuring safe application to human tissue. Although 1,4-NQ-CS inhibited the growth of human mammary adenocarcinoma cells (MDA-MB-231), it is accompanied by cytotoxicity and should be considered with caution. The findings reported herein emphasize that 1,4-NQ-grafted CS may be useful in protecting injured tissue against bacteria, commonly found in skin infections, until complete tissue recovery.

Structure-activity relationship for antibacterial chitosan carrying cationic and hydrophobic moieties

To overcome the problem of antibiotic resistance and toxicity of synthetic polymers, herein we report the synthesis of biocompatible polymers which can serve as broad spectrum antimicrobials. A regioselective synthetic method was developed to synthesize N-functionalized chitosan polymers having similar degree of substitution of cationic and hydrophobic functionality with different lipophilic chains. We obtained optimum antibacterial effect by utilizing the combination of cationic and longer lipophilic chain in the polymer, against four bacterial strains. Inhibition and killing of bacteria were more pronounced in Gram positive bacteria than in Gram negative bacteria. Growth kinetics and scanning electron microscopy imaging of the polymer treated bacterial cells confirmed the inhibition of bacterial growth, morphological changes in the structure and membrane disruption in the cells as compared to the growth control for each strain. Further investigation into the toxicity and selectivity of the polymers guided us to develop a structure-activity relationship for this class of biocompatible polymers.

Deposition of Chitosan on Plasma-Treated Polymers-A Review

Materials for biomedical applications often need to be coated to enhance their performance, such as their biocompatibility, antibacterial, antioxidant, and anti-inflammatory properties, or to assist the regeneration process and influence cell adhesion. Among naturally available substances, chitosan meets the above criteria. Most synthetic polymer materials do not enable the immobilization of the chitosan film. Therefore, their surface should be altered to ensure the interaction between the surface functional groups and the amino or hydroxyl groups in the chitosan chain. Plasma treatment can provide an effective solution to this problem. This work aims to review plasma methods for surface modification of polymers for improved chitosan immobilization. The obtained surface finish is explained in view of the different mechanisms involved in treating polymers with reactive plasma species. The reviewed literature showed that researchers usually use two different approaches: direct immobilization of chitosan on the plasma-treated surface or indirect immobilization by additional chemistry and coupling agents, which are also reviewed. Although plasma treatment leads to remarkably improved surface wettability, this was not the case for chitosan-coated samples, where a wide range of wettability was reported ranging from almost superhydrophilic to hydrophobic, which may have a negative effect on the formation of chitosan-based hydrogels.

Preparation and Characterization of Chitosan/LDH Composite Membranes for Drug Delivery Application

In this study, composite membranes based on chitosan (CS), layered double hydroxide (LDH), and diclofenac were prepared via dispersing of LDH and diclofenac (DCF) in the chitosan matrix for gradual delivery of diclofenac sodium. The effect of using LDH in composites was compared to chitosan loaded with diclofenac membrane. LDH was added in order to develop a system with a long release of diclofenac sodium, which is used in inflammatory conditions as an anti-inflammatory drug. The prepared composite membranes were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscope Analysis (SEM), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analysis (TGA) and UV-Vis Spectroscopy. The results of the FTIR and XPS analyses confirmed the obtaining of the composite membrane and the efficient incorporation of diclofenac. It was observed that the addition of LDH can increase the thermal stability of the composite membrane and favors the gradual release of diclofenac, highlighted by UV-Vis spectra that showed a gradual release in the first 48 h. In conclusion, the composite membrane based on CS-LDH can be used in potential drug delivery application.

Chitosan-Polyphenol Conjugates for Human Health

Human health deteriorates due to the generation and accumulation of free radicals that induce oxidative stress, damaging proteins, lipids, and nucleic acids; this has become the leading cause of many deadly diseases such as cardiovascular, cancer, neurodegenerative, diabetes, and inflammation. Naturally occurring polyphenols have tremendous therapeutic potential, but their short biological half-life and rapid metabolism limit their use. Recent advancements in polymer science have provided numerous varieties of natural and synthetic polymers. Chitosan is widely used due to its biomimetic properties which include biodegradability, biocompatibility, inherent antimicrobial activity, and antioxidant properties. However, due to low solubility in water and the non-availability of the H-atom donor, the practical use of chitosan as an antioxidant is limited. Therefore, chitosan has been conjugated with polyphenols to overcome the limitations of both chitosan and polyphenol, along with increasing the potential synergistic effects of their combination for therapeutic applications. Though many methods have been evolved to conjugate chitosan with polyphenol through activated ester-modification, enzyme-mediated, and free radical induced are the most widely used strategies. The therapeutic efficiency of chitosan-polyphenol conjugates has been investigated for various disease treatments caused by ROS that have shown favorable outcomes and tremendous results. Hence, the present review focuses on the recent advancement of different strategies of chitosan-polyphenol conjugate formation with their advantages and limitations. Furthermore, the therapeutic applicability of the combinatorial efficiency of chitosan-based conjugates formed using Gallic Acid, Curcumin, Catechin, and Quercetin in human health has been described in detail.

Double-Grafted PET Fiber Material to Remove Airborne Bacteria with High Efficiency

Air pollution caused by bacteria and viruses has posed a serious threat to public health. Commercial air purifiers based on dense fibrous filters can remove particulate matter, including airborne pathogens, but do not kill them efficiently. Here, we developed a double-grafted antibacterial fiber material for the high-efficiency capture and inactivation of airborne microorganisms. Tetracarboxyl phthalocyanine zinc, a photosensitizer, was first grafted onto the polyester (PET) fiber, followed by coating with chitosan on the surface of PET fiber to make a double-grafted fiber material. Under the irradiation of light with a specific wavelength (680 nm), double-grafted fiber materials killed up to 99.99% of Gram-positive bacteria and Gram-negative bacteria and had a significant antibacterial effect on drug-resistant bacteria. The double-grafted PET fiber showed broad-spectrum antibacterial activities and was capable to inactivate drug-resistant bacteria. Notably, in filtration experiments for airborne bacteria, this double-grafted PET fiber demonstrated a high bacteria capture efficiency (95.68%) better than the untreated PET fiber (64.87%). Besides, the double-grafted PET fiber was capable of efficiently killing airborne bacteria. This work provides a new idea for the development of air filtration materials that can efficiently kill airborne pathogen and has good biosafety.

Chitosan–Hydroxycinnamic Acids Conjugates: Emerging Biomaterials with Rising Applications in Biomedicine

Over the past thirty years, research has shown the huge potential of chitosan in biomedical applications such as drug delivery, tissue engineering and regeneration, cancer therapy, and antimicrobial treatments, among others. One of the major advantages of this interesting polysaccharide is its modifiability, which facilitates its use in tailor-made applications. In this way, the molecular structure of chitosan has been conjugated with multiple molecules to modify its mechanical, biological, or chemical properties. Here, we review the conjugation of chitosan with some bioactive molecules: hydroxycinnamic acids (HCAs); since these derivatives have been probed to enhance some of the biological effects of chitosan and to fine-tune its characteristics for its application in the biomedical field. First, the main characteristics of chitosan and HCAs are presented; then, the currently employed conjugation strategies between chitosan and HCAs are described; and, finally, the studied biomedical applications of these derivatives are discussed to present their limitations and advantages, which could lead to proximal therapeutic uses.

Enzymatic synthesis of sodium caseinate-EGCG-carboxymethyl chitosan ternary film: Structure, physical properties, antioxidant and antibacterial properties

Proteins and polysaccharides have been frequently used in recent years to prepare environment-friendly packaging materials. However, films based on proteins or polysaccharides alone often have poor performance as packaging, so they need to be combined to improve properties. In this work, we applied enzyme technology to prepare sodium caseinate (SC)-carboxymethyl chitosan (CMC) films, incorporating epigallocatechin gallate (EGCG) as bridging molecules and antibacterial agents. SC-EGCG-CMC ternary conjugate was firstly synthesized by tyrosinase (Tyr), and the composite films were then prepared with the aid of glycerol. Under tyrosinase catalytic conditions, EGCG could cross-link with SC and CMC covalently. The effects of different concentrations of EGCG and tyrosinase on mechanical properties, water vapor permeability, antibacterial properties and free radical scavenging ability were studied. The crosslinking degree and mechanical properties were improved with the increase of EGCG and tyrosinase content. The film showed good antibacterial activity against Gram-positive bacteria. In addition, the antibacterial activity and free radical scavenging ability increased with the increase of EGCG concentration. This work provides an efficient enzymatic method to prepare films with good strength and antibacterial properties, which can be used to improve the storage quality of foods.

Antiulcerogenic and Antibacterial Effects of Chitosan Derivatives on Experimental Gastric Ulcers in Rats

Gastric ulcer is an injury that develops on the lining of the stomach due to an imbalance between aggressive and defensive agents. Chitosan derivatives demonstrate promising biological activities in accelerating the healing activity of gastric lesions. Thus, this study aimed at investigating the healing activity of gastric lesion, induced by acetic acid (80%), of the chitosan derivative with acetylacetone (Cac) modified with ethylenediamine (Cacen) or diethylenetriamine (Cacdien). The biological activity was determined based on cytotoxicity, antibacterial activity, and gastroprotective activities. The results showed no significant difference in the cytotoxicity, a better antibacterial activity against S. aureus and E. coli, and a positive result on the healing of gastric lesions of the materials (Cac 18.4%, Cacen 55.2%, and Cacdien 68.1%) compared to pure chitosan (50.7%). Therefore, the results indicate that derivatives of chitosan are promising biomaterials for application in the control of lesions on the gastric mucosa.

Garlic essential oil microcapsules prepared using gallic acid grafted chitosan: Effect on nitrite control of prepared vegetable dishes during storage

In order to lower the nitrite content in prepared vegetable dishes (PVDs) within a week, microcapsules loaded with garlic essential oils (GEO) were prepared using modified chitosan (CS) with different mass ratios of gallic acid (GA) to CS, and their physicochemical properties were determined. The effects of GEO alone and of microcapsules made using native CS and GA-CS (GA-grafted CS) with the highest conjugation degree on the nitrite content in PVD_S were measured quantitatively. Also, the reasons for the differences were identified. The results showed that the microcapsules prepared using GA-CS (at a mass ratio of 0.5:1) presented the best physicochemical properties, including antioxidant activity, encapsulation efficiency, sustained release, etc. GA-CS microcapsules enhanced growth inhibition of bacteria producing nitrites, thus showing its excellent ability to inhibit nitrites, compared to GEO alone and microcapsules made using native CS. GA-CS encapsulation is a new option to lower the nitrite content in PVDs.

Role of chitosan in titanium coatings. trends and new generations of coatings

Survival studies of dental implants currently reach high figures. However, considering that the recipients are middle-aged individuals with associated pathologies, research is focused on achieving bioactive surfaces that ensure osseointegration. Chitosan is a biocompatible, degradable polysaccharide with antimicrobial and anti-inflammatory properties, capable of inducing increased growth and fixation of osteoblasts around chitosan-coated titanium. Certain chemical modifications to its structure have been shown to enhance its antibacterial activity and osteoinductive properties and it is generally believed that chitosan-coated dental implants may have enhanced osseointegration capabilities and are likely to become a commercial option in the future. Our review provided an overview of the current concepts and theories of osseointegration and current titanium dental implant surfaces and coatings, with a special focus on the in vivo investigation of chitosan-coated implants and a current perspective on the future of titanium dental implant coatings.

Molecular modifications, biological activities, and applications of chitosan and derivatives: A recent update

Polysaccharides arouse great interest due to their structure and unique properties, such as biocompatibility, biodegradability, and absence of toxicity. Polysaccharides from marine sources are particularly useful due to the wide variety of applications and biological activities. Chitosan, a deacetylated derivative of chitin, is an example of an interesting bioactive marine-derived polysaccharide. Moreover, a wide variety of chemical modifications and conjugation of chitosan with other bioactive molecules are responsible for improvements in physicochemical properties and biological activities, expanding the range of applications. An overview of the synthetic approaches for preparing chitosan, chitosan derivatives, and conjugates is described and discussed. A recent update of the biological activities and applications in different research fields, mainly focused on the last 5 years, is presented, highlighting current trends.

Antibacterial activity of chitosan-based nanohybrid membranes against drug-resistant bacterial isolates from burn wound infections

Biocompatible and non-toxic properties of chitosan make it a candidate with excellent application prospects in developing wound dressing conjugate compounds. Six different chitosan-based nanohybrid membranes were evaluated against multidrug-resistant bacterial isolates. Different combinations of chitosan, ciprofloxacin (CIP), biofunctionalized montmorillonite (MMT), and montmorillonite with sulfate chains (SMMT) were provided, and their antibacterial activity was assessed using the colony count method. Totally, 27 drug-resistant isolates, including 6x methicillin-resistant Staphylococcus aureus, 7 vancomycin-resistant Enterococcus faecalis, 4 Acinetobacter baumannii, and 10 Pseudomonas aeruginosa isolates were identified from burn wound infections. Chitosan and montmorillonite did not show significant antibacterial effect (p > 0.05), but chitosan/SMMT/CIP was the most effective nanocomposite (p < 0.01). Chitosan-based nanocomposites with ciprofloxacin could effectively reduce the susceptibility of drug-resistant bacterial isolates. Bacterial targeting using nanosystems provides an opportunity for effective antibiotic treatment by improving antibacterial efficacy.

Phloroglucinol and Its Derivatives: Antimicrobial Properties toward Microbial Pathogens

Phloroglucinol (PG) is a natural product isolated from plants, algae, and microorganisms. Aside from that, the number of PG derivatives has expanded due to the discovery of their potential biological roles. Aside from its diverse biological activities, PG and its derivatives have been widely utilized to treat microbial infections caused by bacteria, fungus, and viruses. The rapid emergence of antimicrobial-resistant microbial infections necessitates the chemical synthesis of numerous PG derivatives in order to meet the growing demand for drugs. This review focuses on the use of PG and its derivatives to control microbial infection and the underlying mechanism of action. Furthermore, as future perspectives, some of the various alternative strategies, such as the use of PG and its derivatives in conjugation, nanoformulation, antibiotic combination, and encapsulation, have been thoroughly discussed. This review will enable the researcher to investigate the possible antibacterial properties of PG and its derivatives, either free or in the form of various formulations.

Impact of Chitosan on the Mechanical Stability of Soils

Chitosan is becoming increasingly applied in agriculture, mostly as a powder, however little is known about its effect on soil mechanical properties. Uniaxial compression test was performed for cylindrical soil aggregates prepared from four soils of various properties (very acidic Podzol, acidic Arenosol, neutral Fluvisol and alkaline Umbrisol) containing different proportions of two kinds of chitosan (CS1 of higher molecular mass and lower deacetylation degree, and CS2 of lower molecular mass and higher deacetylation degree), pretreated with 1 and 10 wetting–drying cycles. In most cases increasing chitosan rates successively decreased the mechanical stability of soils that was accompanied by a tendential increase in soil porosity. In one case (Fluvisol treated with CS2) the porosity decreased and mechanical stability increased with increasing chitosan dose. The behavior of acidic soils (Podzol and Arenosol) treated with CS2, differed from the other soils: after an initial decrease, the strength of aggregates increased with increasing chitosan amendment, despite the porosity consequently decreasing. After 10 wetting–drying cycles, the strength of the aggregates of acidic soils appeared to increase while it decreased for neutral and alkaline soils. Possible mechanisms of soil–chitosan interactions affecting mechanical strength are discussed and linked with soil water stability and wettability.

Chitosan biological molecule improves bactericidal competence of ceftazidime against Burkholderia pseudomallei biofilms

Biofilm-associated Burkholderia pseudomallei infections (melioidosis) are problematic because of reduced sensitivity to antibiotics and high frequency of relapse. Biofilm dispersal agents are essential to liberate the biofilm-encased cells, which then become planktonic and are more susceptible to antibiotics. This study aimed to evaluate the ability of deacetylated chitosan (dCS), an antimicrobial and antibiofilm biological macromolecule, to disrupt established biofilms, thus enabling ceftazidime (CAZ) to kill biofilm-embedded B. pseudomallei. We combined dCS with CAZ using a mechanical stirring method to generate dCS/CAZ. In combination, 1.25-2.5 mg ml^-1 dCS/1-2 μg ml^-1 CAZ acted synergistically to kill cells more effectively than did either dCS or CAZ alone. Notably, a combination of 5-10 mg ml^-1 dCS with 256-512 μg ml^-1 CAZ, prepared either by mechanical stirring (dCS/CAZ) or mixing (dCS + CAZ), drastically improved bactericidal activities against biofilm cells leading to a 3-6 log CFU reduction. Confocal laser-scanning microscope (CLSM) images revealed that 10 mg ml^-1 dCS/512 μg ml^-1 CAZ is by far the best formulation to diminish B. pseudomallei biofilm biomass and produces the lowest live/dead cell ratios of B. pseudomallei in biofilm matrix. Collectively, these findings emphasize the potential of novel therapeutic antibacterial and antibiofilm agents to fight against antibiotic-tolerant B. pseudomallei biofilm-associated infections.

Incorporation of Plant Extracted Hydroxyapatite and Chitosan Nanoparticles on the Surface of Orthodontic Micro-Implants: An In-Vitro Antibacterial Study

In our study, the structural and morphological applications of hydroxyapatite and chitosan nanoparticles and coated micro-implants were assessed for their ability to combat oral pathogenic bacteria. The hydroxyapatite, as well as chitosan nanoparticles, were synthesized from the Salvadora persica plant. The crystal morphology, phase composition, particle size, and surface functional groups of the nano-samples were analyzed via classical examinations and energy dispersive X-ray analysis. The prepared nanoparticles have been examined for antibacterial activity against four common oral bacterial strains. The antimicrobial effect was also assessed by the Live/Dead BacLight technique in combination with confocal scanning laser microscopy. Titanium micro-implants were coated with regular hydroxyapatite (HAP) and chitosan nanoparticles, and the surface was characterized by scanning electron microscopy. The analysis asserted elemental composition of the prepared nanoparticles and their textural features, metal crystallization, and functional bonds. The antibacterial activity of the nanoparticles was evaluated against oral pathogenic microorganisms by the disc diffusion method, minimum bacterial concentration (MBC), and minimum inhibitory concentration (MIC). Chitosan nanoparticles showed (MICs) of 8 μg mL⁻¹ for (Streptococcus salivarius, Streptococcus mutans and Enterococcus faecalis), and 16 μg mL⁻¹ for Streptococcus sanguinis. HAP nanoparticles showed (MICs) of 16 μg/mL for E. faecalis, and S. sanguis, 8 μg/mL for S. salivarius and finally 4 μg/mL for S. mutans. HAP nanoparticles showed enhanced antibacterial activity and more obvious damage in the bacterial cell membrane than that of synthesized chitosan nanoparticles. The prepared nanoparticles could successfully coat titanium microplates to enhance their efficiency.

3D Chitosan-Gallic Acid Complexes: Assessment of the Chemical and Biological Properties

Three-dimensional chitosan-gallic acid complexes were proposed and prepared for the first time by a simple adsorption process of gallic acid (GA) on three-dimensional chitosan structures (3D chitosan). Highly porous 3D devices facilitate a high GA load, up to 2015 mmol/kg at pH 4.0. The preservation of the redox state of GA released from 3D chitosan was confirmed by spectroscopic analyses. The antioxidant activity of 3D chitosan-GA complexes was assessed using the DPPH radical scavenging assay and was found to be dramatically higher than that of free chitosan. The mechanical property of 3D chitosan–GA complexes was also evaluated using a compression test. Finally, 3D chitosan–GA complexes showed a significant antimicrobial capacity against E. coli and S. aureus, selected, respectively, as a model strain for Gram-negative and Gram-positive bacteria. Our study demonstrated a new, simple, and eco-friendly approach to prepare functional chitosan-based complexes for nutraceutical, cosmeceutical, and pharmaceutical applications.

A dual-signal electrochemical immunosensor for the detection of HPV16 E6 oncoprotein based on PdBP dendritic ternary nanospheres and MBSi-Chi nanocomposites

A dual-signal electrochemical immunosensor was fabricated to detect HPV16 E6 oncoprotein for the first time, which meets the requirements for a quick and sensitive detection.

Chitosan - Rosmarinic acid conjugates with antioxidant, anti-inflammatory and photoprotective properties

Rosmarinic acid is an attractive candidate for skin applications because of its antioxidant, anti-inflammatory, and photoprotective functions, however, its poor bioavailability hampers its therapeutic outcome. In this context, synthesis of polymer conjugates is an alternative to enlarge its applications. This work describes the synthesis of novel water-soluble chitosan - rosmarinic acid conjugates (CSRA) that have great potential for skin applications. Chitosan was functionalized with different contents of rosmarinic acid as confirmed by ATR-FTIR, 1H NMR and UV spectroscopies. CSRA conjugates presented three-fold radical scavenger capacity compared to the free phenolic compound. Films were prepared by solvent-casting procedure and the biological activity of the lixiviates was studied in vitro. Results revealed that lixiviates reduced activation of inflamed macrophages, improved antibacterial capacity against E. coli with respect to native chitosan and free rosmarinic acid, and also attenuated UVB-induced cellular damage and reactive oxygen species production in fibroblasts and keratinocytes.