Sodium Alginate—Natural Microencapsulation Material of Polymeric Microparticles

Oral delivery of sodium alginate/chitosan bilayer microgels loaded with Lactobacillus rhamnosus GG for targeted therapy of ulcerative colitis

Probiotics regulate intestinal flora balance and enhance the intestinal barrier, which is useful in preventing and treating colitis. However, they have strict storage requirements. In addition, they degrade in a strongly acidic environment, resulting in a significant decrease in their activity when used as microbial agents. Lactobacillus rhamnosus GG (LGG) was loaded into acid-resistant and colon-targeting double-layer microgels. The inner layer consists of guar gum (GG) and low methoxyl pectin (LMP), which can achieve retention and degradation in the colon. To achieve colon localization, the outer layer was composed of chitosan (CS) and sodium alginate (SA). The formulation demonstrated favorable bio-responses across various pH conditions in vitro and sustained release of LGG in the colon lesions. Bare LGG survival decreased by 52.2 % in simulated gastric juice (pH 1.2) for 2 h, whereas that of encapsulated LGG decreased by 18.5 %. In the DSS-induced inflammatory model, LGG-loaded microgel significantly alleviated UC symptoms in mice and reduced inflammatory factor levels in the colon. Encapsulation of LGG improved its stability in acidic conditions, thus increasing its content at the colon lesions and reducing pathogenic bacteria. These findings provide an experimental basis and a technical reference for developing and applying probiotic microgel preparations.

A thiolated oxidized guar gum and sodium alginate dual-network microspheres with enhanced gastric acid resistance and mucoadhesion for delivery of probiotics

Probiotics offer numerous beneficial functions for human bodies, while the low survival rate under gastric acid and short retention time in the intestine are the major obstacles to their utilization. To address these issues, we designed a novel dual-network hydrogel microsphere that combines gastric acid resistance with enhanced mucoadhesion, aiming for the targeted delivery of probiotics. Thiolated oxidized guar gum (SOGG) was disulfide-linked to form the first network, and sodium alginate (SA) was cross-linked with Ca2+ to form the second network. Under the protection of the interpenetrating dual network microspheres, a much higher viability of Lactobacillus rhamnosus (LGG) (8.73 log CFU/mL) was achieved in simulated gastric fluid, compared to the zero-survival rate of free LGG. Mucoadhesion tests showed that the adhesion rate of SOGG/SA microspheres to the intestinal mucosa was 1.75 times higher than that of thiol-free microspheres. In vivo studies revealed that LGG-loaded microspheres significantly enhanced intestinal barrier function, remodeled the gut microbiome, and alleviated DSS-induced colitis in mice. Overall, SOGG/SA microspheres provide an effective strategy to the challenges of probiotic reduction in the stomach and rapid expulsion from the intestines, enhancing their health benefits.

In vitro Models for Predicting Bioadhesion Fracture Strength to Ex Vivo Animal Buccal Tissue

Commitment to the 3Rs principle (Replacement, Reduction, and Refinement) led to the development of a cell-based system to measure buccal bioadhesion in vitro and replace the use of porcine buccal and esophageal tissues (PBT and PET, respectively). Additionally, the aim is to bridge the gap in knowledge regarding the bioadhesion properties of PBT and PET. The in vitro models are based on the human buccal epithelial cell line-TR146 without ("Model I") or with ("Model II") 5% (w/v) mucous layer. The in vitro setup also provides a method to evaluate the bioadhesion between two soft materials. Standard bioadhesive hydrogels (alginate, chitosan, and gelatin) are used to test and compare the results from the in vitro models to the ex vivo tissues. The ex vivo and in vitro models show increased bioadhesion as the applied force and contact time increases. Furthermore, Model I exhibits bioadhesion values-of alginate, chitosan, and gelatin-comparable to those obtained with PBT. It is also found that contact time and applied force similarly affect PBT and PET bioadhesion, while PET exhibits greater values. In conclusion, Model I can replace PBT for measuring bioadhesion and be incorporated into the experimental design of bioadhesive DDS, thus minimizing animal tissue usage.

Antimicrobial topical polymeric films loaded with Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid and silver nanoparticles: Optimization, characterization, and biological activity

The study examined the antimicrobial and antioxidant potential of pure Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid (70%) and AKBA loaded nanoparticles as topical polymeric films. The optimized concentration (0.05 % w/v) of pure AKBA, boswellic acid (BA), and AKBA loaded silver nanoparticles were used to study its impact on film characteristics. Carboxymethyl cellulose (CMC), sodium alginate (SA), and gelatin (Ge) composite films were prepared in this study. The polymeric films were evaluated for their biological (antioxidant and antimicrobial activities) and mechanical characteristics such as tensile strength (TS) and elongation (%). Moreover, other parameters including water barrier properties and color attributes of the film were also evaluated. Furthermore, assessments were conducted using analytical techniques like FTIR, XRD, and SEM. Surface analysis revealed that AgNP precipitation led to a few particles in the film structure. Overall, the results indicate a relatively consistent microstructure. Moreover, due to the addition of AKBA, BA, and AgNPs, a significant decrease in TS, moisture content, water solubility, and water vapor permeation was observed. The films transparency also showed a decreasing trend, and the color analysis revealed decreasing yellowness (b*) of the films. Importantly, a significant increase in antioxidant activity against DPPH free radicals and ABTS cations was observed in the CSG films. Additionally, the AgNP-AKBA loaded films displayed significant antifungal activity against C. albicans. Moreover, the molecular docking analysis revealed the inter-molecular interactions between the AKBA, AgNPs, and composite films. The docking results indicate good binding of AKBA and silver nanoparticles with gelatin and carboxymethyl cellulosemolecules. In conclusion, these polymeric films have potential as novel materials with significant antioxidant and antifungal activities.

Enhancing nitrogen removal performance using immobilized aerobic denitrifying bacteria by modified polyvinyl alcohol/sodium alginate (PVA/SA)

Aerobic denitrification has emerged as a promising and efficient method for nitrogen removal from wastewater. However, the direct application of aerobic denitrifying bacteria has faced challenges such as low nitrogen removal efficiency, bacterial loss, and poor stability. To address these issues, this study developed a novel microbial particle carrier using NaHCO3-modified polyvinyl alcohol (PVA)/sodium alginate (SA) gel (NaHCO3-PVA/SA). This carrier exhibits several advantageous properties, including excellent mass transfer efficiency, favorable biocompatibility, convenient film formation, abundant biomass, and exceptional pollutant treatment capacity. The carrier was modified with 0.3% NaHCO3, 8.0% PVA, and 1.0% SA, resulting in a remarkable 3.4-fold increase in the average pore diameter and a 12.8% improvement in mass transfer efficiency. This carrier was utilized to immobilize the aerobic denitrifying bacterium Stutzerimonas stutzeri W-2 to enhance nitrogen removal (NaHCO3-PVA/SA@W-2), resulting in a NO3--N removal efficiency of 99.06%, which was 21.39% higher than that without modification. Compared with the non-immobilized W-2, the degradation efficiency was improved by 43.70%. After five reuses, the NO3--N and TN removal rates remained at 99% and 93.01%, respectively. These results provide a solid foundation for the industrial application of the modified carrier as an effective tool for nitrogen removal in large-scale wastewater treatment processes.

Formation of Microcapsules of Pullulan by Emulsion Template Mechanism: Evaluation as Vitamin C Delivery Systems

Pullulan is a polysaccharide that has attracted the attention of scientists in recent times as a former of edible films. On the other hand, its use for the preparation of hydrogels needs more study, as well as the formation of pullulan microcapsules as active ingredient release systems for the food industry. Due to the slow gelation kinetics of pullulan with sodium trimetaphosphate (STMP), capsules cannot be formed through the conventional method of dropping into a solution of the gelling agent, as with other polysaccharides, since the pullulan chains migrate to the medium before the capsules can form by gelation. Pullulan microcapsules have been obtained by using inverse water-in-oil emulsions as templates. The emulsion that acts as a template has been characterized by monitoring its stability and by optical microscopy, and the size of the emulsion droplets has been correlated with the size of the microcapsules obtained, demonstrating that it is a good technique for their production. Although some flocs of droplets form, these remain dispersed during the gelation process and two capsule size distributions are obtained: those of the non-flocculated droplets and the flocculated droplets. The microcapsules have been evaluated as vitamin C release systems, showing zero-order release kinetics for acidic pH and Fickian mechanism for neutral pH. On the other hand, the microcapsules offer good protection of vitamin C against oxidation during an evaluation period of 14 days.

Insights from Syzygium aromaticum Essential Oil: Encapsulation, Characterization, and Antioxidant Activity

Alginate encapsulates loaded with clove essential oil (CEO) were prepared by ionic gelation, with subsequent freeze-drying. The objective of the present work was to develop a product with the ability to protect CEO against its easy volatility and oxidation. The following techniques were used to characterize the formulations: eugenol release, degree of swelling, GC/MS, TGA/DSC, and SEM. The alginate solution (1.0%) containing different concentrations of CEO (LF1: 1.0%; LF2: 0.5%; LF3: 0.1%) was dropped into a 3.0% CaCl2 solution. After lyophilization, the encapsulated samples were wrinkled and rigid, with high encapsulation power (LF3: 76.9% ± 0.5). Three chemical components were identified: eugenol (the major one), caryophyllene, and humulene. The antioxidant power (LF1: DPPH IC50 18.1 µg mL-1) was consistent with the phenol content (LF1: 172.2 mg GAE g-1). The encapsulated ones were thermally stable, as shown by analysis of FTIR peaks, eugenol molecular structure was kept unaltered. The degree of swelling was 19.2% (PBS). The release of eugenol (92.5%) in the PBS solution was faster than in the acidic medium. It was concluded that the low-cost technology used allows the maintenance of the content and characteristics of CEO in the three concentrations tested, offering a basis for further research with essential oil encapsulates.

Carbomer Hydrogels with Microencapsulated α-Tocopherol: Focus on the Biocompatibility of the Microcapsules, Topical Application Attributes, and In Vitro Release Study

The microencapsulation of α-tocopherol based on the complex coacervation of low-molecular-weight chitosan (LMWC) and sodium lauryl ether sulphate (SLES) without harmful crosslinkers can provide biocompatible carriers that protect it from photodegradation and air oxidation. In this study, the influence of the microcapsule wall composition on carrier performance, compatibility with a high-water-content vehicle for topical application, and release of α-tocopherol were investigated. Although the absence of aldehyde crosslinkers decreased the encapsulation efficiency of α-tocopherol (~70%), the variation in the LMWC/SLES mass ratio (2:1 or 1:1) had no significant effect on the moisture content and microcapsule size. The prepared microcapsule-loaded carbomer hydrogels were soft semisolids with pseudoplastic flow behavior. The integrity of microcapsules embedded in the hydrogel was confirmed by light microscopy. The microcapsules reduced the pH, apparent viscosity, and hysteresis area of the hydrogels, while increasing their spreading ability on a flat inert surface and dispersion rate in artificial sweat. The in vitro release of α-tocopherol from crosslinker-free microcapsule-loaded hydrogels was diffusion-controlled. The release profile was influenced by the LMWC/SLES mass ratio, apparent viscosity, type of synthetic membrane, and acceptor medium composition. Better data quality for the model-independent analysis was achieved when a cellulose nitrate membrane and ethyl alcohol 60% w/w as acceptor medium were used.

An optimized chitosan/alginate-based microencapsulation of lime peel essential oil and its application as an antibacterial textile

A functional textile immobilized by microcapsules of the lime peel essential oils of C. aurantifolia (LPEO) was prepared and characterized. A varied amount of Chitosan/Alginate (CH/AG) ratios, followed by a mass of LPEO and concentration of sodium tripolyphosphate (STPP) crosslinker, was optimized sequentially to coacervate LPEO using a Tween 80 emulsifier. An antibacterial assay against both Gram-positive and Gram-negative bacteria was further evaluated for the embedded microcapsules. The LPEO (0.2 g) was effectively coacervated by CH/AG (5:3) crosslinked by 2% of STTP to give a yield, oil content (OC), and encapsulation efficiency (EE) of 53.45 ± 2.16%, 65.08 ± 2.60% and 85.04 ± 0.70% respectively. A rough spherical shape of LPEO microcapsules was homogeneously observed with an average particle size of 0.757 mm. An Avrami's kinetic model revealed the release mechanism of the core following zero-order kinetics (k = 1.11 ± 0.13 × 10-9 s-1, Ea = 70.21 kJ/mol). The LPEO microcapsules demonstrated good thermal stability up to 122 °C and maintained 38% OC at ambient temperature for four weeks. A 70.34 ± 4.16% of the LPEO microcapsules were successfully overlaid onto the gauze with citric acid binder and sodium phosphate catalyst. Overall, the immobilized microcapsules exhibited strong inhibition against S. aureus and moderate against S. epidermidis, E. coli, and K. pneumonia.

AI energized hydrogel design, optimization and application in biomedicine

Traditional hydrogel design and optimization methods usually rely on repeated experiments, which is time-consuming and expensive, resulting in a slow-moving of advanced hydrogel development. With the rapid development of artificial intelligence (AI) technology and increasing material data, AI-energized design and optimization of hydrogels for biomedical applications has emerged as a revolutionary breakthrough in materials science. This review begins by outlining the history of AI and the potential advantages of using AI in the design and optimization of hydrogels, such as prediction and optimization of properties, multi-attribute optimization, high-throughput screening, automated material discovery, optimizing experimental design, and etc. Then, we focus on the various applications of hydrogels supported by AI technology in biomedicine, including drug delivery, bio-inks for advanced manufacturing, tissue repair, and biosensors, so as to provide a clear and comprehensive understanding of researchers in this field. Finally, we discuss the future directions and prospects, and provide a new perspective for the research and development of novel hydrogel materials for biomedical applications.

Characterization of Acellular Cartilage Matrix-Sodium Alginate Scaffolds in Various Proportions

The development of three-dimensional (3D) bioprinting technology has provided a new solution to address the shortage of donors, multiple surgeries, and aesthetic concerns in microtia reconstruction surgery. The production of bioinks is the most critical aspect of 3D bioprinting. Acellular cartilage matrix (ACM) and sodium alginate (SA) are commonly used 3D bioprinting materials, and there have been reports of their combined use. However, there is a lack of comprehensive evaluations on ACM-SA scaffolds with different proportions. In this study, bioinks were prepared by mixing different proportions of decellularized rabbit ear cartilage powder and SA and then printed using 3D bioprinting technology and crosslinked with calcium ions to fabricate scaffolds. The physical properties, biocompatibility, and toxicity of ACM-SA scaffolds with different proportions were compared. The adhesion and proliferation of rabbit adipose-derived stem cells on ACM-SA scaffolds of different proportions, as well as the secretion of Collagen Type II, were evaluated under an adipose-derived stem cell chondrogenic induction medium. The following conclusions were drawn: when the proportion of SA in the ACM-SA scaffolds was <30%, the printed structure failed to form. The ACM-SA scaffolds in proportions from 1:9 to 6:4 showed no significant cytotoxicity, among which the 5:5 proportion of ACM-SA scaffold was superior in terms of adhesiveness and promoting cell proliferation and differentiation. Although a higher proportion of SA can provide greater mechanical strength, it also significantly increases the swelling ratio and reduces cell proliferation capabilities. Overall, the 5:5 proportion of ACM-SA scaffold demonstrated a more desirable biological and physical performance.

Exploring the Nutritional and Bioactive Potential of Olive Leaf Residues: A Focus on Minerals and Polyphenols in the Context of Spain's Olive Oil Production

Lyophilized plant-origin extracts are rich in highly potent antioxidant polyphenols. In order to incorporate them into food products, it is necessary to protect these phytochemicals from atmospheric factors such as heat, light, moisture, or pH, and to enhance their bioavailability due to their low solubility. To address these challenges, recent studies have focused on the development of encapsulation techniques for antioxidant compounds within polymeric structures. In this study, lyophilized olive leaf extracts were microencapsulated with the aim of overcoming the aforementioned challenges. The method used for the preparation of the studied microparticles involves external ionic gelation carried out within a water-oil (W/O) emulsion at room temperature. HPLC analysis demonstrates a high content of polyphenols, with 90% of the bioactive compounds encapsulated. Meanwhile, quantification by inductively coupled plasma optical emission spectroscopy (ICP-OES) reveals that the dried leaves, lyophilized extract, and microencapsulated form contain satisfactory levels of macro- and micro-minerals (calcium, potassium, sodium). The microencapsulation technique could be a novel strategy to harness the polyphenols and minerals of olive leaves, thus enriching food products and leveraging the antioxidant properties of the polyphenolic compounds found in the lyophilized extract.

Modified polysaccharides for food packaging applications: A review

Development of new food packaging materials is crucial to reduce the use of single-use plastics and to limit their destructive impact on the environment. Polysaccharides provide an alternative solution to this problem. This paper summarizes and discusses recent research results on the potential of modifying polysaccharides as materials for film and coating applications. Modifications of polysaccharides significantly affect their properties, as well as their application usability. Although modifications of biopolymers for packaging applications have been widely studied, polysaccharides have attracted little attention despite being a prospective, environmentally friendly, and economically viable packaging alternative. Therefore, this paper discusses approaches to the development of biodegradable, polysaccharide-based food packaging materials and focuses on modifications of four polysaccharides, such as starch, chitosan, sodium alginate and cellulose. In addition, these modifications are presented not only in terms of the selected polysaccharide, but also in terms of specific properties, i.e. hydrophilic, barrier and mechanical properties, of polysaccharides. Such a presentation of results makes it much easier to select the modification method to improve the unsatisfactory properties of the material. Moreover, very often it happens that the applied modification improves one and worsens another property, which is also presented in this review.

3D bioprinting bioglass to construct vascularized full-thickness skin substitutes for wound healing

Constructing three-dimensional (3D) bioprinted skin tissues that accurately replicate the mechanical properties of native skin and provide adequate oxygen and nutrient support remains a formidable challenge. In this study, we incorporated phosphosilicate calcium bioglasses (PSCs), a type of bioactive glass (BG), into the bioinks used for 3D bioprinting. The resulting bioink exhibited mechanical properties and biocompatibility that closely resembled those of natural skin. Utilizing 3D bioprinting technology, we successfully fabricated full-thickness skin substitutes, which underwent comprehensive evaluation to assess their regenerative potential in treating full-thickness skin injuries in rats. Remarkably, the skin substitutes loaded with PSCs exhibited exceptional angiogenic activity, as evidenced by the upregulation of angiogenesis-related genes in vitro and the observation of enhanced vascularization in wound tissue sections in vivo. These findings conclusively demonstrated the outstanding efficacy of PSCs in promoting angiogenesis and facilitating the repair of full-thickness skin wounds. The insights garnered from this study provide a valuable reference strategy for the development of skin tissue grafts with potent angiogenesis-inducing capabilities.

Pre-exposure prophylactic mucoadhesive sodium alginate microsphere laden pessaries for intravaginal delivery of tenofovir disoproxil fumarate

The research aimed to develop novel bioadhesive sodium alginate (Na-Alg) microspheres laden pessaries for intravaginal delivery of tenofovir disoproxil fumarate (TDF), to overcome limitations of conventional dosage forms. Twelve batches of microspheres formulated by emulsification gelation method indicated that drug-polymer ratios and polymer type affected particle size, drug release, and entrapment efficiency (%EE). Microspheres of batch EH-8 with drug: polymer ratio of 1:4 containing equal amounts of Na-Alg and HPMC K100M displayed optimal %EE (62.09 ± 1.34 %) and controlled drug release (97.02 ± 4.54 % in 12 h). Particle size analysis in Matersizer indicated that microspheres (EH-8) displayed a surface-mean diameter of 11.06 ± 0.18 μm. Ex-vivo mucoadhesion studies on rabbit mucosa indicated that microspheres (EH-8) adhered well for 12 h. Microspheres integrated into pessaries displayed a sustained release profile (95.31 ± 1.37 % in 12 h) in simulated vaginal fluid. In vivo studies in rabbits indicated that pessaries displayed a significantly higher Cmax (41.18 ± 3.57 ng/mL) (P < 0.005) and reduced Tmax (1.00 ± 0.01 h) (P < 0.0001) of TDF concentrations in vaginal fluid compared to oral tablets. The microparticulate pessaries with the ability to elicit higher vaginal fluid levels in the crucial initial hours of insertion demonstrates a potential novel platform to offer better self-protection to HIV-negative women against HIV during sexual intercourse.

Microencapsulation and controlled release of Bacillus clausii through a novel non-digestible carbohydrate formulation as revolutionizing probiotic delivery

Probiotics have gained significant attention in recent years due to the growing awareness of physical health and well-being. However, maintaining high concentrations of probiotics throughout the product's shelf life and during the gastrointestinal tract is crucial for ensuring their health-promoting effects. After determining an optimal formulation through a fractional factorial model, this study optimizes probiotic Bacillus Clausii delivery through spray-drying microencapsulation using a novel maltodextrin-alginate-inulin (MDX-ALG-IN) formulation (optimized ratio: 7:2:1). Notably, this formulation exclusively comprises non-digestible carbohydrates, marking a novel approach in probiotic encapsulation. Achieving a high Product Yield (51.06 %) and Encapsulation Efficiency (80.53 %), the study employed SEM for morphological analysis, revealing an irregular form and extensive surface in dentations characteristic of maltodextrin involvement. With a low moisture content of 3.02 % (±0.23 %) and 90.52 % solubility, the powder displayed exceptional properties. Probiotic viability remained robust, surviving up to 60 % even after 180 days at 4 °C, 25 °C, and 37 °C. Thermal characterization unveiled microcapsule resilience, exhibiting a glass transition temperature (Tg) at 138.61 °C and a melting point of 177.28 °C. The study systematically addresses crucial aspects of microencapsulation, including formulation optimization, morphological characteristics, and powder properties. Notably, the MDX-ALG-IN microcapsules demonstrated stability in simulated gastrointestinal conditions, indicating potential application for supplements and complex food matrices. In summary, this research contributes to microencapsulation understanding, emphasizing the MDX-ALG-IN formulation's efficacy in preserving probiotic viability across production stages and simulated digestive processes.

The physicochemical properties and molecular docking study of plasticized amphotericin B loaded sodium alginate, carboxymethyl cellulose, and gelatin-based films

Plasticizers are employed to stabilize films by safeguarding their physical stability and avoiding the degradation of the loaded therapeutic drug during processing and storage. In the present study, the plasticizer effect (glycerol) was studied on bioadhesive films based on sodium alginate (SA), carboxymethyl cellulose (CMC) and gelatin (GE) polymers loaded with amphotericin B (AmB). The main objective of the current study was to assess the morphological, mechanical, thermal, optical, and barrier properties of the films as a function of glycerol (Gly) concentration (0.5-1.5 %) using different techniques such as Scanning Electron Microscope (SEM), Texture analyzer (TA), Differential Scanning Calorimeter (DSC), X-Ray Diffraction (XRD), and Fourier Transforms Infrared Spectroscopy (FTIR). The concentration increase of glycerol resulted in an increase in Water Vapor Permeability (WVP) (0.187-0.334), elongation at break (EAB) (0.88-35.48 %), thickness (0.032-0.065 mm) and moisture level (17.5-41.76 %) whereas opacity, tensile strength (TS) (16.81-0.86 MPa), and young's modulus (YM) (0.194-0.002 MPa) values decreased. Glycerol incorporation in the film-Forming solution decreased the brittleness and fragility of the films. Fourier Transform Infrared (FTIR) spectra showed that intermolecular hydrogen bonding occurred between glycerol and polymers in plasticized films compared to control films. Furthermore, molecular docking was applied to predict the binding interactions betweem AmB, CMC, gelatin, SA and glycerol, which further endorsed the stabilizing effects of glycerol in the complex formation between AmB, CMC, SA, and gelatin. The Findings of the current study demonstrated that this polymeric blend could be used to successfully prepare bioadhesive films with glycerol as a plasticizer.

Influence of the Encapsulating Agent on the Bioaccessibility of Phenolic Compounds from Microencapsulated Propolis Extract during In Vitro Gastrointestinal Digestion

The aim of this work is to develop different encapsulated propolis ingredients by spray-drying and to evaluate their bioaccessibility using simulated in vitro digestion. To achieve these goals, first, microparticles of a propolis extract with inulin as the coating polymer were prepared under the optimal conditions previously determined. Then, a fraction of inulin was replaced with other encapsulating agents, namely sodium alginate, pectin, and chitosan, to obtain different ingredients with controlled release properties in the gastrointestinal tract. The analysis of the phenolic profile in the propolis extract and microparticles showed 58 compounds tentatively identified, belonging mainly to phenolic acid derivatives and flavonoids. Then, the behavior of the free extract and the formulated microparticles under gastrointestinal conditions was studied through an in vitro gastrointestinal digestion process using the INFOGEST protocol. Digestion of the free extract resulted in the degradation of most compounds, which was minimized in the encapsulated formulations. Thus, all developed microparticles could be promising strategies for improving the stability of this bioactive extract under gastrointestinal conditions, thereby enhancing its beneficial effect.

Development of Anthocyanin-Rich Gel Beads from Colored Rice for Encapsulation and In Vitro Gastrointestinal Digestion

Colored rice anthocyanins are water-soluble natural pigments that can be used as an active ingredient in healthy food and pharmaceutical products. However, anthocyanin utilization is limited because of its instability. This work produced anthocyanin-rich gel beads from colored rice using a modified ionotropic gelation technique for encapsulation, and their efficacy was studied in vitro in the gastrointestinal tract. In total, 15 colored rice samples of three types (whole grain rice, ground rice, and ground germinated rice) were screened to identify the highest anthocyanin content. The anthocyanin content of the whole grain rice was significantly (p < 0.05) higher than it was in the ground and ground germinated rice. The sample with the highest anthocyanin content (1062.7 µg/g) was the black glutinous rice grain from Phrae, chosen based on its anthocyanin-rich crude extract. A new formula using a modified ionotropic gelation technique was prepared for the inclusion of the extract in gel beads. The results indicated that the incorporation of oil and wax significantly increased the encapsulation efficiency of the gel beads (% EE value of 85.43%) and improved the bioavailability of the active ingredient. Moreover, after simulated digestion, the release of anthocyanin and total phenolic content occurred more than five times. Scanning electron microscopy revealed that the surface of the gel beads was smooth. Furthermore, the presence of polyphenols and polysaccharides in the gel beads was confirmed using FTIR. The oil-wax-incorporated, anthocyanin-rich gel beads could be implemented for antioxidant delivery into the gastrointestinal tract to further improve healthy food and nutraceutical products.

Development of functional, sustainable pullulan-sodium alginate-based films by incorporating essential oil microemulsion for chilled pork preservation

Developing safe, eco-friendly, and functionally edible packaging materials has attracted global attention. Essential oils, can be incorporated into packaging materials as antioxidant and antibacterial agents. However, their high volatility and discontinuous film matrix issues may cause a rough film surface, limiting the application in food packaging. In this study, thyme essential oil microemulsion (TEO-M) was prepared and incorporated into a pullulan-sodium alginate (PS) film. The TEO-M incorporation endowed the PS film with antioxidant and UV protection properties. The antioxidant activities of the TEO-M-incorporated PS film were significantly better than those of the TEO-C (thyme essential oil coarse emulsion)-incorporated PS film. In comparison to TEO-C, the distribution of TEO-M in the film is more uniform. Lipid oxidation and the growth of microorganisms in chilled pork were inhibited by incorporating TEO-M at a concentration of 50 mg/mL in the PS film (PS-50M). After 10 days of storage at 4 °C, the total viable count (TVC) of chilled pork preserved in the PS-50M material was significantly reduced compared to the control group (P < 0.05). This study shows that incorporating TEO-M in the PS film provides a method for applying essential oils in food packaging, which may have great potential in the food industry.

Factorial design of in situ gelling two-compartment systems containing chlorhexidine for the treatment of periodontitis

Periodontitis is one of the most widespread bacterial infectious oral diseases that affects a significant percentage of the population worldwide. Different bacterial strains are responsible for the chronic inflammation and subgingival plaque that could be effectively treated with prolonged exposure to therapeutic levels of antibiotics and antiseptics in the periodontal pockets. Medicated in situ gels of chlorhexidine (CHX), for extended drug release and long-lasting antiseptic effect in the targeted cavities, were prepared in a two-compartment system. One compartment was loaded with sodium alginate solution while other was filled with CHX and calcium solution. The mixing of the solutions during the application resulted in gelation. Two 33 full factorial designs were applied in this study in order to optimize the gel formulation. Initially, the effects of concentration of gelling agent, crosslinker, and pH of the system on the dependent variables such as gel formation and structure characteristics were investigated. Then, the concentration of the crosslinker was optimized. Afterwards, the effect of gelling agent, loading of the drug, and pH of the gel system were correlated with the gel characteristics through another factorial design. Optimized formulations were tested for mucoadhesion, in vitro drug release, and microbiological investigation. Based on the results of the factorial design, mucoadhesiveness, antimicrobial investigation, and drug release, a 4 % alginate composition can be considered optimal. Overall, the optimized in situ periodontal gel was found to be effective with prolonged retention time and desirable outcomes.

Four Ounces Can Move a Thousand Pounds: The Enormous Value of Nanomaterials in Tumor Immunotherapy

The application of nanomaterials in healthcare has emerged as a promising strategy due to their unique structural diversity, surface properties, and compositional diversity. In particular, nanomaterials have found a significant role in improving drug delivery and inhibiting the growth and metastasis of tumor cells. Moreover, recent studies have highlighted their potential in modulating the tumor microenvironment (TME) and enhancing the activity of immune cells to improve tumor therapy efficacy. Various types of nanomaterials are currently utilized as drug carriers, immunosuppressants, immune activators, immunoassay reagents, and more for tumor immunotherapy. Necessarily, nanomaterials used for tumor immunotherapy can be grouped into two categories: organic and inorganic nanomaterials. Though both have shown the ability to achieve the purpose of tumor immunotherapy, their composition and structural properties result in differences in their mechanisms and modes of action. Organic nanomaterials can be further divided into organic polymers, cell membranes, nanoemulsion-modified, and hydrogel forms. At the same time, inorganic nanomaterials can be broadly classified as nonmetallic and metallic nanomaterials. The current work aims to explore the mechanisms of action of these different types of nanomaterials and their prospects for promoting tumor immunotherapy.

Oral delivery of porous starch-loaded bilayer microgels for controlled drug delivery and treatment of ulcerative colitis

We prepared one type of bilayer microgels for oral administration with three effects: pH responsiveness, time lag, and colon enzyme degradation. Combined with the dual biological effects of curcumin (Cur) for reducing inflammation and promoting repair of colonic mucosal injury, targeted colonic localization and release of Cur according to the colonic microenvironment were enhanced. The inner core, derived from guar gum and low-methoxyl pectin, afforded colonic adhesion and degradation behavior; the outer layer, modified by alginate and chitosan via polyelectrolyte interaction, achieved colonic localization. The porous starch (PS)-mediated strong adsorption allowed Cur loading in inner core to achieve a multifunctional delivery system. In vitro, the formulations exhibited good bioresponses at different pH conditions, potentially delaying Cur release in the upper gastrointestinal tract. In vivo, dextran sulfate sodium-induced ulcerative colitis (UC) symptoms were significantly alleviated after oral administration, accompanied by reduced levels of inflammatory factors. The formulations facilitated colonic delivery, allowing Cur accumulation in colonic tissue. Moreover, the formulations could alter gut microbiota composition in mice. During Cur delivery, each formulation increased species richness, decreased pathogenic bacterial content, and afforded synergistic effects against UC. These PS-loaded bilayer microgels, exhibiting excellent biocompatibility, multi-bioresponsiveness, and colon targeting, could be beneficial in UC therapy, allowing development into a novel oral formulation.

Contemporary Aspects of Designing Marine Polysaccharide Microparticles as Drug Carriers for Biomedical Application

The main goal of modern pharmaceutical technology is to create new drug formulations that are safer and more effective. These formulations should allow targeted drug delivery, improved drug stability and bioavailability, fewer side effects, and reduced drug toxicity. One successful approach for achieving these objectives is using polymer microcarriers for drug delivery. They are effective for treating various diseases through different administration routes. When creating pharmaceutical systems, choosing the right drug carrier is crucial. Biomaterials have become increasingly popular over the past few decades due to their lack of toxicity, renewable sources, and affordability. Marine polysaccharides, in particular, have been widely used as substitutes for synthetic polymers in drug carrier applications. Their inherent properties, such as biodegradability and biocompatibility, make marine polysaccharide-based microcarriers a prospective platform for developing drug delivery systems. This review paper explores the principles of microparticle design using marine polysaccharides as drug carriers. By reviewing the current literature, the paper highlights the challenges of formulating polymer microparticles, and proposes various technological solutions. It also outlines future perspectives for developing marine polysaccharides as drug microcarriers.

Microparticles in the Development and Improvement of Pharmaceutical Formulations: An Analysis of In Vitro and In Vivo Studies

Microparticulate systems such as microparticles, microspheres, microcapsules or any particle in a micrometer scale (usually of 1–1000 µm) are widely used as drug delivery systems, because they offer higher therapeutic and diagnostic performance compared to conventional drug delivery forms. These systems can be manufactured with many raw materials, especially polymers, most of which have been effective in improving the physicochemical properties and biological activities of active compounds. This review will focus on the in vivo and in vitro application in the last decade (2012 to 2022) of different active pharmaceutical ingredients microencapsulated in polymeric or lipid matrices, the main formulation factors (excipients and techniques) and mostly their biological activities, with the aim of introducing and discussing the potential applicability of microparticulate systems in the pharmaceutical field.

The Spray-Dried Alginate/Gelatin Microparticles with Luliconazole as Mucoadhesive Drug Delivery System

Candida species are opportunistic fungi, which are primary causative agents of vulvovaginal candidiasis. The cure of candidiasis is difficult, lengthy, and associated with the fungi resistivity. Therefore, the research for novel active substances and unconventional drug delivery systems providing effective and safe treatment is still an active subject. Microparticles, as multicompartment dosage forms due to larger areas, provide short passage of drug diffusion, which might improve drug therapeutic efficiency. Sodium alginate is a natural polymer from a polysaccharide group, possessing swelling, mucoadhesive, and gelling properties. Gelatin A is a natural high-molecular-weight polypeptide obtained from porcine collagen. The purpose of this study was to prepare microparticles by the spray-drying of alginate/gelatin polyelectrolyte complex mixture, with a novel antifungal drug-luliconazole. In the next stage of research, the effect of gelatin presence on pharmaceutical properties of designed formulations was assessed. Interrelations among polymers were evaluated with thermal analysis and Fourier transform infrared spectroscopy. A valid aspect of this research was the in vitro antifungal activity estimation of designed microparticles using Candida species: C. albicans, C. krusei, and C. parapsilosis. It was shown that the gelatin addition affected the particles size, improved encapsulation efficiency and mucoadhesiveness, and prolonged the drug release. Moreover, gelatin addition to the formulations improved the antifungal effect against Candida species.

Development of chondrocyte-laden alginate hydrogels with modulated microstructure and properties for cartilage regeneration

Alginate hydrogel is an attractive biomaterial for cell microencapsulation. The microarchitecture of hydrogels can regulate cellular functions. This study aims to investigate the applicability of sodium citrate buffer (SCB) as a culture medium supplement for modulating the microstructure of alginate microbeads to provide a favorable microenvironment for chondrogenic induction. The chondrocyte-laden microbeads, with and without TGF-β3 incorporation, were produced through an encapsulator. The obtained small-sized microbeads (~300 μm) were exposed to a treatment medium containing SCB, composed of varied concentrations of sodium citrate (1.10-1.57 mM), sodium chloride (3.00-4.29 mM), and ethylenediaminetetraacetic acid (0.60-0.86 mM) to partially degrade their crosslinked structure for 3 days, followed by culture in a normal medium until day 21. Scanning electron microscope micrographs demonstrated a loose hydrogel network with an enhanced pore size in the SCB-treated microbeads. Increasing the concentration of SCB in the treatment medium reduced the calcium content of the microbeads via a Na⁺ /Ca²⁺ exchange process and improved the water absorption of the microbeads, resulting in a higher swelling ratio. All the tested SCB concentrations were non-cytotoxic. Increases in aggrecan and type II collagen gene expression and their corresponding extracellular matrix accumulation, glycosaminoglycans, and type II collagen were vividly detected in the TGF-β3-containing microbeads with increasing SCB concentrations in the treatment medium. Our findings highlighted that the combination of SCB treatment and TGF-β3 incorporation in the chondrocyte-laden microbeads is a promising strategy for enhancing cartilage regeneration, which may contribute to a versatile application in cell delivery and tissue engineering.