Root and Root Canal Configuration Characterization Using Microcomputed Tomography: A Systematic Review

Comprehensive analysis of root canal morphology in maxillary premolars among the Pakistani subpopulation: a CBCT-based study

BACKGROUND

Understanding the root canal morphology is essential for the success of root canal treatment. Therefore, this study aimed to evaluate and analyze the root canal configuration of maxillary premolars using Cone Beam Computed Tomography in the Pakistani subpopulation.

METHOD

This cross-sectional study utilized CBCT scans from two distinct centres: Aga Khan University in Karachi and Jinnah MRI and Body Scans in Lahore. The CBCT images were visualized using GALAXIS version 1.9 (SICAT GmbH and Co. KG, Bonn, Germany), integrated within the Sirona Dental System (D-64625 Bensheim, Germany). The scanning parameters were standardized at 85 kV, 7 mA, with a 15-s exposure time and a voxel size of 0.16 mm. A total of 707 CBCT scans were collected, encompassing 2180 maxillary premolars. Root canal configurations were classified based on (Ahmed et al. Int Endod J. 2017;50(8):761-70). Statistical analyses were performed using SPSS version 26, employing the Chi-square test with a significance level set at p < 0.05.

RESULTS

The distribution of root canal morphologies varied significantly with age and gender. Among maxillary premolars, 50% exhibited the typical configuration of 2MPMB1 L1 (two roots, single canal in each buccal and lingual root), while 26% of maxillary right second premolars displayed 1MPM1 (one root, one canal). Overall, 1MPM1 accounted for 27.4% of the total cases in the second premolars. There was no statistically significant relationship between age and root canal distribution in either first premolars (p = 0.338) or second premolars (p = 0.833). Regarding gender, a significant difference was observed in the distribution of right maxillary 1st premolars (p = 0.022*), with a higher prevalence among females.

CONCLUSION

This study offers significant insights into the anatomical variations of root canals in maxillary premolars across diverse regional subpopulations in Pakistan. While specific root canal configurations were prevalent, the findings indicate no statistically significant correlation between age and root canal morphology in maxillary premolars. However, a notable gender disparity was observed in the distribution of the right maxillary first premolars.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study

BACKGROUND

In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations.

METHODS

From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology.

RESULTS

The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars.

CONCLUSION

This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review

INTRODUCTION

Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population.

METHODOLOGY

An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.

RESULTS

The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.

CONCLUSION

This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Distolingual root prevalence in mandibular first molar and complex root canal morphology in incisors: a CBCT analysis in Indian population

Cone-beam computed tomography was used to understand the possible correlation between the prevalence of distolingual root (DLR) in permanent mandibular first molars (MFMs) and the associated complicated mandibular incisor's root canal morphology (MIs) in an Indian population. A total of 400 scans were evaluated for MFMs and MIs. The prevalence of DLRs and root canal anatomy of MIs were assessed based on Vertucci's classification, and then the sample were grouped according to age, sex and side. Statistical analysis was used to evaluate the possible correlation between the presence of DLRs in the first molar and root canal morphology of incisors. Chi square test was used to evaluate the correlation between the root canal configurations of MIs with the existence of DLRs in MFMs. There was no statistically significant difference between sexes or ages for the prevalence of DLRs in the first molars (p > 0.05), which was 6.62%, with the right side having a greater frequency of DLRs (7.8%) than the left (5.5%). Vertucci Type I canal configuration was most common for the mandibular central (66.75%) and lateral incisors (58.62%). Vertucci Type III was the most common complicated canal morphology, followed by Types V, II, and IV for MIs, with no statistically significant difference in the studied sample's age and sex. (p < 0.05). No association was observed between the presence of DLRs in first molars and complicated root canal configurations in MIs. Taken together, the possibility of complicated root canal configuration in MIs was lesser in the presence of DLRs in MFMs among the Indian population.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis

INTRODUCTION

Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography.

METHODOLOGY

The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI).

RESULTS

The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 μm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification.

CONCLUSION

This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Microcomputed tomography (micro-CT) analysis of apical mandibular premolar in relation to clinical sign presentation: An in vitro study

Introduction

Variations in anatomic apex and apical foramina of root canals are common in different teeth types. The sophisticated 3D micro-CT aids researchers in investigating the apical morphology, such as the apical foramen (AF) and constriction (AC).

Objectives

To measure the length between the foramen and the apex and the physiological length to the apex, in lower premolar teeth. Furthermore, a measurement was conducted on the average length from the foramen to the apex of the lower premolar teeth with respect to the presence of clinical and non-clinical signs.

Methods

A total of 80 lower premolar teeth were selected based on the inclusion criteria. All samples were scanned using micro-CT ZEISS X-Radia (17 µm), and the datasets were analysed. The root canal AF and AC were reconstructed using Drishti software (V3.0) by utilising a 4-digit system code in millimetres (mm).

Results

More than half of the lower premolars (n = 47, 58.8 %) demonstrated a clinical signs presentation, while the rest had a non-clinical sign (n = 33, 41.3 %). There was a significant difference (p = 0.013) between the non-clinical and clinical groups in the mean length from the apical foramen to the apex (AFA) at 0.59 mm and 0.47 mm, respectively. Meanwhile, the non-clinical and clinical mean length from apical constriction to apex (ACA) were 0.75 mm and 0.73 mm, and the mean length from AF to AC (AFC) was 0.48 mm and 0.53 mm, respectively. Nonetheless, no significant differences were detected between the ACA and AFC of non-clinical and clinical groups.

Conclusion

The clinical signs presentation observed in lower premolars mainly affected the apical morphology, particularly the position and length of the root AF, and less so the AC position and length. Therefore, the information is useful for clinical purposes.

Bibliometric analysis: Root and root canal morphology using cone-beam computed tomography

OBJECTIVES

This bibliometric analysis aimed to evaluate the leading nations, authors, journals, institutes, highly cited publications, and most commonly used keywords concerning scientific publications based on root and root canal morphology using the CBCT.

MATERIAL AND METHODS

For this bibliometric analysis, an extensive search was carried out on September 25, 2023 using the Scopus database. Pertinent articles in the field were scrutinized after applying inclusion and exclusion criteria. Data were evaluated using Vosviewer and Microsoft Excel.

RESULTS

A literature search revealed the initiation of scientific publication in 2008. Significant contributions made by Saudi Arabia, India, and China concerning the number of publications were seen. Similarly, Jazan University from SA was recognized as the leading institute. The Journal of Endodontics was the leading journal, while authors JNR Martins and G Gambarini produced the highest number of papers.

CONCLUSIONS

This bibliometric analysis demonstrated that scientific publications have increased tremendously since 2008. Significant contributions have been made by developing and developed nations. The Journal of Endodontics and Jazan University have been identified as the leading journal and institute.

Middle mesial canal in mandibular first molar: A narrative review

Purpose

This review aimed to assess the incidence, anatomical characteristics, identification, and clinical management using conventional techniques and advanced tools to manage MMCs successfully.

Methods

Medline/PubMed and Scopus databases were searched using "Middle mesial canal," "Middle mesial root canal," OR "Accessory mesial canal" keywords from 1 January 1970 and 1 February 2023. The most pertinent articles were chosen for the review from the retrieved articles. In addition, relevant articles were added by manually searching the list of references.

Results

The incidence of MMC is noticeable in younger people, and the confluent canal is the most common type. The majority of MMCs merged with mesiobuccal (MB) canals rather than mesiolingual (ML) canals. Clinical management could be employed using the standard endodontics protocol, and recent radiography technologies, magnification, rotary, and obturation materials can facilitate the procedures.

Conclusion

The possibility of the incidence of MMC is not unusual. Detection and thorough debridement followed by obturation of the canal could increase the success rate of clinical outcomes.

Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study

BACKGROUND

The clinician should have complete knowledge of the normal anatomy of the root as well as complexities in the root canal configuration for a better outcome, as missed or improper handling of the canal system can lead to the failure of an entire endodontic procedure. The present study aims to assess the morphology of roots and canals in permanent mandibular premolars in the Saudi subpopulation with a new classification system.

METHODS

The present study includes 1230 mandibular premolars (645 first premolars and 585-second premolars) from 500 CBCT images of the patients, including retrospective data. iCAT scanner system (Imaging Sciences International, Hatfield, PA, USA) was used to obtain the images; scanning of 8 × 8 cm images was performed at 120 KVp and 5-7 mA with a voxel size of 0.2 mm. The new method of classification presented by Ahmed et al. 2017 was used to record and classify the root canal morphology, followed by recording the differences regarding the age and gender of the patients. Comparison of canal morphology in lower permanent premolars and its association with gender and age of the patients was done by Chi-square test/ Fisher exact test; the significance level was set at 5% (p ≤ 0.05).

RESULTS

The left mandibular 1st and 2nd premolars with one root were 47.31%, with two roots were 2.19%. However, three roots (0.24%) and C-shaped canals (0.24%) were reported only in the left mandibular 2nd premolar. The right mandibular 1st and 2nd premolars with one root were 47.56%, with two roots were 2.03%. The overall percentage of the number of roots and canals in the first and second premolars ¹ PM ¹ (88.38%), ² PM ¹ B ¹ L ¹ (3.5%), ² PM B ¹ L ¹ (0.65%), ¹ PM ^1-2-1 (3.08%), ¹ PM ^1-2 (3.17%), ¹ PM ^1-2-1-2 (0.24%), ³ PMMB ¹ DB ¹ L¹ (0.48%). However, the C-shaped canals (0.40%) were reported in right and left mandibular second premolars. No statistically significant difference was reported between mandibular premolars and gender. A statistically significant difference was reported between mandibular premolars and the age of the study subjects.

CONCLUSION

Type I (¹ TN ¹) was the major root canal configuration in permanent mandibular premolars, which was higher among males. The CBCT imaging provides thorough details about the root canal morphology of lower premolars. These findings could support diagnosis, decision-making, and root canal treatment, for dental professionals.

Variation in location of the distobuccal root canal in a permanent maxillary second molar: A case report

Key Clinical Message

Clinicians should be aware of the variations in the number of roots and root canals and the peculiar or eccentric location of root canals. An intraoperative CBCT can be very useful in improved visualization of the anatomical variations.

Abstract

This case report describes the unusual location of the distobuccal root canal in a maxillary second molar with root fusion. On access opening, three distinct root canal orifices, the mesiobuccal canal, palatal canal, and a third orifice closer to the palatal canal, were seen, giving an illusion of an additional palatal canal. An attempt was made to search for the distobuccal canal in its usual position, leading to the gouging of the pulp chamber floor. An intraoperative limited field of view cone-beam computed tomography (CBCT) revealed the root orifice adjacent to the palatal canal was the distobuccal canal. CBCT also revealed fusion of both the buccal and palatal roots in the root's coronal and middle third region, but they were not fused apically.

A micro-computed tomographic analysis of the root canal systems in the permanent mandibular incisors in a Chinese population

BACKGROUND

Comprehensive understanding of the root canal system complexity is critical important for successful root canal therapy. A double root canal system may be present in permanent mandibular incisors with a variable incidence in different ethnic populations. Ignorance or improper management of this canal variation can lead to treatment failure. This in vitro study aimed to identify the anatomic features of root canal systems in the mandibular incisors in a Chinese population by using micro-CT.

METHODS

A total of 106 permanent mandibular incisors (53 central incisors and 53 lateral incisors) were collected from a native Chinese population. The teeth were scanned by a micro-CT scanner and then reconstructed three-dimensionally. The canal configurations were detected by Vertucci's classification, and the number and location of the accessory canals were also identified. The long (D) and short diameters (d) of the main and accessory canals were measured and D/d ratio was calculated at different root levels (cemento-enamel junction [CEJ] level, mid-root level and 1, 2, 3 and 4 mm from the apex). The root canal curvatures in the double-canaled mandibular incisors were measured at the proximal view by using modified Schneider's method. Chi-square test or Fisher's exact test was used for comparison of occurrence rates. Comparison of means from multiple groups was performed by using one-way ANOVA and LSD post-hoc test.

RESULTS

In regard to the occurrence of double root canals, gender difference was neither detected in the mandibular central (16.0% [male] vs 14.3% [female]; p = 0.862), nor in the mandibular lateral incisors (26.9% [male] vs 33.3% [female]; p = 0.611). Age group difference was also not detected in the mandibular central (p = 0.717) and lateral incisors (p = 0.521). The incidence of double root canals was 15.1% (8/53) in the central incisors, and 30.2% (16/53) in the lateral incisors, but the difference did not reach statistical significance (p = 0.063). The most frequent non-single canal type was the type III (1-2-1) (18.9% [20/106]), and the other types identified included 1 case of type II (2-1) and 3 cases of type V (1-2). The incidence of accessory canals was 17.9% (19/106), with a mean level of 1.92 ± 1.19 mm from the apex. The frequency of long-oval (2 ≤ D/d < 4) and flattened canals (D/d ≥ 4), as well as the mean value of D, d and D/d ratio increased from the apical 1 mm to the apical 4 mm level (the D/d ratio increased from 1.9 to 2.9 for the single canals, from 1.4 to 3.3 for the buccal canals and from 1.2 to 2.3 for the lingual canals), and the D/d ratio reached the peak at the mid-root level. Double curvatures were detected in 33.3% (8/24) of the buccal canals and 37.5% (9/24) of the lingual canals, and the difference has no statistical significance (p = 0.063). The degrees of the primary curvatures were 21.5 ± 7.1 degrees for the buccal and 30.1 ± 9.2 degrees for the lingual canals, and the degrees of secondary curvatures were 27.0 ± 11.4 degrees for the buccal and 30.5 ± 12.5 degrees for the lingual canals in the double curvatures. The degrees of the single curvatures were 14.2 ± 6.3 degrees for the buccal and 15.6 ± 6.0 degrees for the lingual canals. Significant difference was detected among above 6 groups of canal curvatures (p = 0.000), and severe curvatures (≥ 20 degrees) were more frequently detected in the double curved canals.

CONCLUSIONS

Double-canaled mandibular incisors were not uncommon in the Chinese population, and type 1-2-1 was the most frequent non-single canal type. Gender and age did not significantly impact the occurrence of a second canal in mandibular incisors. Long-oval and flattened canals were very common at different root levels and their incidence increased from apex to the mid-root level. Severe curvatures were frequently detected in the double canal systems, especially in those canals with double curvatures.

Designing Novel Multi-Epitope Vaccine Construct against Prevotella intermedia-Interpain A: An Immunoinformatics Approach

Background and Objectives: Periodontitis is a chronic multifactorial inflammatory infectious disease marked by continuous degradation of teeth and surrounding parts. One of the most important periodontal pathogens is P. intermedia, and with its interpain A proteinase, it leads to an increase in lethal infection. Materials and Methods: The current study was designed to create a multi-epitope vaccine using an immunoinformatics method that targets the interpain A of P. intermedia. For the development of vaccines, P. intermedia peptides InpA were found appropriate. To create a multi-epitope vaccination design, interpain A, B, and T-cell epitopes were found and assessed depending on the essential variables. The vaccine construct was evaluated based on its stability, antigenicity, and allergenicity. Results: The vaccine construct reached a more significant population and was able to bind to both the binding epitopes of major histocompatibility complex (MHC)-I and MHC-II. Through the C3 receptor complex route, P. intermedia InpA promotes an immunological subunit. Utilizing InpA-C3 and vaccination epitopes as the receptor and ligand, the molecular docking and dynamics were performed using the ClusPro 2.0 server. Conclusion: The developed vaccine had shown good antigenicity, solubility, and stability. Molecular docking indicated the vaccine's 3D structure interacts strongly with the complement C3. The current study describes the design for vaccine, and steady interaction with the C3 immunological receptor to induce a good memory and an adaptive immune response against Interpain A of P. intermedia.

A Three-Dimensional Analysis of Morphological Variations in Maxillary Second Molar in a North Indian Population Using Cone-Beam Computed Tomography

Background: Cone beam computed tomography (CBCT) has evolved in the field of endodontics and has helped to diagnose and treat the case very easily and accurately. The researchers set out to pinpoint the exact placement of the roots and canals in the maxillary second molars of North Indians by analyzing CBCT pictures.

Methods: In this study, in vivo CBCT was used to examine the maxillary second molars (n = 70) in detail. Both the number and configuration of root canals may be determined using Vertucci's categorization.

Results: Most people had three roots in their second molars (85.7%). Most maxillary second molars that had three roots looked like they had three separate roots (81.7%). In the roots of 85.7% of maxillary second molars, one canal was found in the mesiobuccal roots, and 14.2% had an MB2 canal. All of the canals in the palatal, distobuccal root, and MB1 root were Type I. The Type II canal configuration was found in 11.7% of MB2 canals. Type IV canals were found in 5% of the MB2 canals. The number of maxillary second molars with MB2 was found to be the same for both men and women (P =0.11). The number of MB2 cases did not depend on where the teeth were or how old the person was (P=0.08 and 0.06, respectively). The fact that both second molars appeared at the same time was important (P<0.001).

Conclusions: We report the occurrence of unusual morphologic abnormalities that affect only one root and have only been described in case reports. CBCT scans can help doctors better understand root canal anatomy and potentially enhancing endodontic management outcomes.

FEATURES OF THE VARIATIVE MORPHOLOGY OF THE MANDIBULAR SECOND MOLAR USING CONE-BEAM COMPUTED TOMOGRAPHY IMAGING

OBJECTIVE

The aim: To characterize the variations in the anatomical structure of the second lower molar.

PATIENTS AND METHODS

Materials and methods: In order to determine the topography of the roots and root canals of the mandibular second molar, modern imaging methods were used: orthopan¬tomography and cone-beam computed tomography.

RESULTS

Case report: During the analysis of the orthopantomogram of the patient, the three-root morphology of the root system of 37 teeth was revealed. That is, three roots were clearly visualized. After detecting an atypical shape of the root system of the mandibular second molar in the panoramic image, the patient was offered to perform cone-beam computed tomography (CPCT) for diagnostic purposes. Analysis by cone-beam computed tomography showed the presence of four mature roots of normal length, which were arranged in the shape of a diamond.

CONCLUSION

Conclusions: The four-root configuration is considered a rare form for mandibular molars, but it should be considered in endodontic interventions and, if possible, in the planning of such interventions, use cone-beam computed tomography.