A System for Monitoring Breathing Activity Using an Ultrasonic Radar Detection with Low Power Consumption

Contactless Technologies, Sensors, and Systems for Cardiac and Respiratory Measurement during Sleep: A Systematic Review

Sleep is essential to physical and mental health. However, the traditional approach to sleep analysis-polysomnography (PSG)-is intrusive and expensive. Therefore, there is great interest in the development of non-contact, non-invasive, and non-intrusive sleep monitoring systems and technologies that can reliably and accurately measure cardiorespiratory parameters with minimal impact on the patient. This has led to the development of other relevant approaches, which are characterised, for example, by the fact that they allow greater freedom of movement and do not require direct contact with the body, i.e., they are non-contact. This systematic review discusses the relevant methods and technologies for non-contact monitoring of cardiorespiratory activity during sleep. Taking into account the current state of the art in non-intrusive technologies, we can identify the methods of non-intrusive monitoring of cardiac and respiratory activity, the technologies and types of sensors used, and the possible physiological parameters available for analysis. To do this, we conducted a literature review and summarised current research on the use of non-contact technologies for non-intrusive monitoring of cardiac and respiratory activity. The inclusion and exclusion criteria for the selection of publications were established prior to the start of the search. Publications were assessed using one main question and several specific questions. We obtained 3774 unique articles from four literature databases (Web of Science, IEEE Xplore, PubMed, and Scopus) and checked them for relevance, resulting in 54 articles that were analysed in a structured way using terminology. The result was 15 different types of sensors and devices (e.g., radar, temperature sensors, motion sensors, cameras) that can be installed in hospital wards and departments or in the environment. The ability to detect heart rate, respiratory rate, and sleep disorders such as apnoea was among the characteristics examined to investigate the overall effectiveness of the systems and technologies considered for cardiorespiratory monitoring. In addition, the advantages and disadvantages of the considered systems and technologies were identified by answering the identified research questions. The results obtained allow us to determine the current trends and the vector of development of medical technologies in sleep medicine for future researchers and research.

Monitoring of Sleep Breathing States Based on Audio Sensor Utilizing Mel-Scale Features in Home Healthcare

Sleep-related breathing disorders (SBDs) will lead to poor sleep quality and increase the risk of cardiovascular and cerebrovascular diseases which may cause death in serious cases. This paper aims to detect breathing states related to SBDs by breathing sound signals. A moment waveform analysis is applied to locate and segment the breathing cycles. As the core of our study, a set of useful features of breathing signal is proposed based on Mel frequency cepstrum analysis. Finally, the normal and abnormal sleep breathing states can be distinguished by the extracted Mel-scale indexes. Young healthy testers and patients who suffered from obstructive sleep apnea are tested utilizing the proposed method. The average accuracy for detecting abnormal breathing states can reach 93.1%. It will be helpful to prevent SBDs and improve the sleep quality of home healthcare.

A Novel Portable Real-Time Low-Cost Sleep Apnea Monitoring System based on the Global System for Mobile Communications (GSM) Network

Background and objective

Continuous monitoring of breathing activity plays a vital role in the detection of respiratory-based diseases (SA, COPD, etc.). Sleep Apnea (SA) is characterized by recurrent upper airway obstruction during sleep associated with arterial blood desaturation, sympathetic nervous system activation, and cardiovascular impairment. Untreated patients with SA have increased mortality rates compared to the general population. This study aims to design a remote monitoring system for sleep apnea to ensure patient safety and ease the workload of doctors in the Covid-19 era.

Methods

This study aims to design a remote monitoring system for sleep apnea to ensure patient safety and ease the workload of doctors. Our study focuses on a novel portable real-time low-cost sleep apnea monitoring system utilizing the GSM network (GSM Shield Sim900a). Proposed system is a remote monitoring and patient tracking system to detect the apnea event in real time, and to provide information of the sleep position, pulse, and respiratory and oxygen saturation to the medical specialists (SpO₂) by establishing a direct contact. As soon as an abnormal condition is detected in the light of these parameters, the condition is reported (instant or in the form of short reports after sleep) to the patient relatives, the doctor’s mobile telephone or to the emergency medical centers (EMCs) through a GSM network to handle the case depending on the patient’s emergency condition.

Results

A study group was formed of six patients for monitoring apnea events (three males and three females) between the ages of 20 and 60. The patients in the study group have sleep apnea (SA) in different grades. All the apnea events were detected, and all the patients were successfully alerted. Also, the patient parameters were successfully sent to all patient relatives. Patients who could not get out of apnea were called through the CALL feature, and they were informed about their ongoing apnea event and told that intervention was necessary. The proposed system is tested on six patients. The beginning moment of apnea was successfully detected and the SMS/CALL feature was successfully activated without delay. During the testing, it has been observed that while some of the patients start breathing after the first SMS, some others needed the second or the third SMS. According to the measurement result, the maximum breathless time is 46 s among the patients, and a SMS is sent every 15 s. In addition, in cases where the patient was breathless for a long time, the CALL feature was actively sought from the relatives of the patient and enabled him to intervene. The proposed monitoring system could be used in both clinical and home settings.

Conclusions

The monitoring of a patient in real time allows to intervene in any unexpected circumstances about the patient. The proposed work uses an acceleration sensor as a reliable method of the sleep apnea for monitoring and prevention. The developed device is more economical, comfortable, and convenient than existing systems not only for the patients but also for the doctors. The patients can easily use this device in their home environment, so which could yield a more comfortable, easy to use, cost-effective, and long-term breathing monitoring system for healthcare applications.

Graphical abstract

Non-Contact Spirometry Using a Mobile Thermal Camera and AI Regression

Non-contact physiological measurements have been under investigation for many years, and among these measurements is non-contact spirometry, which could provide acute and chronic pulmonary disease monitoring and diagnosis. This work presents a feasibility study for non-contact spirometry measurements using a mobile thermal imaging system. Thermal images were acquired from 19 subjects for measuring the respiration rate and the volume of inhaled and exhaled air. A mobile application was built to measure the respiration rate and export the respiration signal to a personal computer. The mobile application acquired thermal video images at a rate of nine frames/second and the OpenCV library was used for localization of the area of interest (nose and mouth). Artificial intelligence regressors were used to predict the inhalation and exhalation air volume. Several regressors were tested and four of them showed excellent performance: random forest, adaptive boosting, gradient boosting, and decision trees. The latter showed the best regression results, with an R-square value of 0.9998 and a mean square error of 0.0023. The results of this study showed that non-contact spirometry based on a thermal imaging system is feasible and provides all the basic measurements that the conventional spirometers support.

Contact and Remote Breathing Rate Monitoring Techniques: A Review

Breathing rate monitoring is a must for hospitalized patients with the current coronavirus disease 2019 (COVID-19). We review in this paper recent implementations of breathing monitoring techniques, where both contact and remote approaches are presented. It is known that with non-contact monitoring, the patient is not tied to an instrument, which improves patients' comfort and enhances the accuracy of extracted breathing activity, since the distress generated by a contact device is avoided. Remote breathing monitoring allows screening people infected with COVID-19 by detecting abnormal respiratory patterns. However, non-contact methods show some disadvantages such as the higher set-up complexity compared to contact ones. On the other hand, many reported contact methods are mainly implemented using discrete components. While, numerous integrated solutions have been reported for non-contact techniques, such as continuous wave (CW) Doppler radar and ultrawideband (UWB) pulsed radar. These radar chips are discussed and their measured performances are summarized and compared.

Energy-efficient IoT based improved health monitoring system for sports persons

Nowadays, wearable technology and the Internet of Things (IoT) are transforming the healthcare sector by refining the way how devices, applications, and people connect and interact with each other. IoT applications in sports are tremendously useful to monitor health and reduce the risk factor. The battery life of wearable and accurate monitoring has been considered a significant challenge in sports medicine. Hence, in this paper, Energy Efficient IoT based Improved Health Monitoring system (EEIoT-IHMS) has been proposed for accurate and continuous sports person’s health monitoring system. This paper determines the optimal set of clusters based on sensor features, in which power usage has been minimized by duty cycling with optimized prediction accuracy. The experimental results demonstrate that the proposed (EEIoT-IHMS) enhances accuracy ratio, improves battery life, and reduces energy consumption compared to other popular methods.

Estimation of Apnea-Hypopnea Index using Deep Learning on 3D Craniofacial Scans

Obstructive sleep apnea (OSA) is characterized by decreased breathing events that occur through the night, with severity reported as the apnea-hypopnea index (AHI), which is associated with certain craniofacial features. In this study, we used data from 1366 patients collected as part of Stanford Technology Analytics and Genomics in Sleep (STAGES) across 11 US and Canadian sleep clinics and analyzed 3D craniofacial scans with the goal of predicting AHI, as measured using gold standard nocturnal polysomnography (PSG). First, the algorithm detects pre-specified landmarks on mesh objects and aligns scans in 3D space. Subsequently, 2D images and depth maps are generated by rendering and rotating scans by 45-degree increments. Resulting images were stacked as channels and used as input to multi-view convolutional neural networks, which were trained and validated in a supervised manner to predict AHI values derived from PSGs. The proposed model achieved a mean absolute error of 11.38 events/hour, a Pearson correlation coefficient of 0.4, and accuracy for predicting OSA of 67% using 10-fold cross-validation. The model improved further by adding patient demographics and variables from questionnaires. We also show that the model performed at the level of three sleep medicine specialists, who used clinical experience to predict AHI based on 3D scan displays. Finally, we created topographic displays of the most important facial features used by the model to predict AHI, showing importance of the neck and chin area. The proposed algorithm has potential to serve as an inexpensive and efficient screening tool for individuals with suspected OSA.

Low Power Contactless Bioimpedance Sensor for Monitoring Breathing Activity

An electronic circuit for contactless detection of impedance changes in a tissue is presented. It operates on the principle of resonant frequency change of the resonator having the observed tissue as a dielectric. The operating frequency reflects the tissue dielectric properties (i.e., the tissue composition and on the tissue physiological changes). The sensor operation was tested within a medical application by measuring the breathing of a patient, which was an easy detectable physiological process. The advantage over conventional contact bioimpedance measurement methods is that no direct contact between the resonator and the body is required. Furthermore, the sensor's wide operating range, ability to adapt to a broad range of measured materials, fast response, low power consumption, and small outline dimensions enables applications not only in the medical sector, but also in other domains. This can be extended, for example, to food industry or production maintenance, where the observed phenomena are reflected in dynamic dielectric properties of the observed object or material.

A Review of the State of the Art in Non-Contact Sensing for COVID-19

COVID-19, caused by SARS-CoV-2, has resulted in a global pandemic recently. With no approved vaccination or treatment, governments around the world have issued guidance to their citizens to remain at home in efforts to control the spread of the disease. The goal of controlling the spread of the virus is to prevent strain on hospitals. In this paper, we focus on how non-invasive methods are being used to detect COVID-19 and assist healthcare workers in caring for COVID-19 patients. Early detection of COVID-19 can allow for early isolation to prevent further spread. This study outlines the advantages and disadvantages and a breakdown of the methods applied in the current state-of-the-art approaches. In addition, the paper highlights some future research directions, which need to be explored further to produce innovative technologies to control this pandemic.

Energy-Efficient Elderly Fall Detection System Based on Power Reduction and Wireless Power Transfer

Elderly fall detection systems based on wireless body area sensor networks (WBSNs) have increased significantly in medical contexts. The power consumption of such systems is a critical issue influencing the overall practicality of the WBSN. Reducing the power consumption of these networks while maintaining acceptable performance poses a challenge. Several power reduction techniques can be employed to tackle this issue. A human vital signs monitoring system (HVSMS) has been proposed here to measure vital parameters of the elderly, including heart rate and fall detection based on heartbeat and accelerometer sensors, respectively. In addition, the location of elderly people can be determined based on Global Positioning System (GPS) and transmitted with their vital parameters to emergency medical centers (EMCs) via the Global System for Mobile Communications (GSM) network. In this paper, the power consumption of the proposed HVSMS was minimized by merging a data-event (DE) algorithm and an energy-harvesting-technique-based wireless power transfer (WPT). The DE algorithm improved HVSMS power consumption, utilizing the duty cycle of the sleep/wake mode. The WPT successfully charged the HVSMS battery. The results demonstrated that the proposed DE algorithm reduced the current consumption of the HVSMS to 9.35 mA compared to traditional operation at 85.85 mA. Thus, an 89% power saving was achieved based on the DE algorithm and the battery life was extended to 30 days instead of 3 days (traditional operation). In addition, the WPT was able to charge the HVSMS batteries once every 30 days for 10 h, thus eliminating existing restrictions involving the use of wire charging methods. The results indicate that the HVSMS current consumption outperformed existing solutions from previous studies.