3D ZnO/Ag Surface-Enhanced Raman Scattering on Disposable and Flexible Cardboard Platforms

A Review on Integrated ZnO-Based SERS Biosensors and Their Potential in Detecting Biomarkers of Neurodegenerative Diseases

Surface-enhanced Raman spectroscopy (SERS) applications in clinical diagnosis and spectral pathology are increasing due to the potential of the technique to bio-barcode incipient and differential diseases via real-time monitoring of biomarkers in fluids and in real-time via biomolecular fingerprinting. Additionally, the rapid advancements in micro/nanotechnology have a visible influence in all aspects of science and life. The miniaturization and enhanced properties of materials at the micro/nanoscale transcended the confines of the laboratory and are revolutionizing domains such as electronics, optics, medicine, and environmental science. The societal and technological impact of SERS biosensing by using semiconductor-based nanostructured smart substrates will be huge once minor technical pitfalls are solved. Herein, challenges in clinical routine testing are addressed in order to understand the context of how SERS can perform in real, in vivo sampling and bioassays for early neurodegenerative disease (ND) diagnosis. The main interest in translating SERS into clinical practice is reinforced by the practical advantages: portability of the designed setups, versatility in using nanomaterials of various matter and costs, readiness, and reliability. As we will present in this review, in the frame of technology readiness levels (TRL), the current maturity reached by semiconductor-based SERS biosensors, in particular that of zinc oxide (ZnO)-based hybrid SERS substrates, is situated at the development level TRL 6 (out of 9 levels). Three-dimensional, multilayered SERS substrates that provide additional plasmonic hot spots in the z-axis are of key importance in designing highly performant SERS biosensors for the detection of ND biomarkers.

3D silver metallized nanotrenches fabricated by nanoimprint lithography as flexible SERS detection platform

We report the development of highly sensitive substrates with great potential as Surface-enhanced Raman scattering (SERS) spectroscopy detection platforms, consisting of nanoimprint lithography (NIL) fabricated nanotrenches in plastic and covered by nanostructured silver (Ag) films with thicknesses in the 10-100 nm range deposited by direct current (DC) sputtering. The Ag film thickness was increased by using sequential deposition times and its contribution to the obtained enhancement factor was determined. The morphological and structural properties of the metalized nanotrenches were assessed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. Crystal violet (CV) was used as analyte to test the SERS activity of the substrates prepared with or without the nanoimprinted pattern. Our original approach was to determine the resulted SERS enhancement from the synergy of three key aspects: the Ag metallization of cheap, flexible substrates, the effect of increasing the Ag film thickness and the periodic nanotrenches imprinted by NIL as substrate. We found a dramatical contribution in the SERS signal of the periodical Ag nanopattern in comparison to the Ag film quantified by a calculated enhancement factor (EF) up to 10⁷ in case of the SERS detection platform with a 25 nm Ag layer on top of the periodic nanotrenches. The contribution of plasmonic nanostructures contained in the Ag films as well as the contribution of the periodical nanopatterned trenches was assessed, as a cumulative effect to the first contribution. This substrate showed a considerably lower limit of detection (LOD) for SERS, down to 10 pM, much better uniformity as well as more reproducible signals in comparison with the other thicknesses of the metallic film.

Ag/ZnO Thin Film Nanocomposite Membrane Prepared by Laser-Assisted Method for Catalytic Degradation of 4-Nitrophenol

Zinc oxide thin film (ZnO thin film) and a silver-doped zinc oxide nanocomposite thin film (Ag/ZnO thin film) were prepared by the technique of the pulsed laser deposition at 600 °C to be applicable as a portable catalytic material for the removal of 4-nitrophenol. The nanocomposite was prepared by making the deposition of the two targets (Zn and Ag), and it was analyzed by different techniques. According to the XRD pattern, the hexagonal wurtzite crystalline form of Ag-doped ZnO NPs suggested that the samples were polycrystalline. Additionally, the shifting of the diffraction peaks to the higher angles, which denotes that doping reduces the crystallite size, illustrated the typical effect of the dopant Ag nanostructure on the ZnO thin film, which has an ionic radius less than the host cation. From SEM images, Ag-doping drastically altered the morphological characteristics and reduced the aggregation. Additionally, its energy band gap decreased when Ag was incorporated. UV spectroscopy was then used to monitor the catalysis process, and Ag/ZnO thin films had a larger first-order rate constant of the catalytic reaction K than that of ZnO thin film. According to the catalytic experiment results, the Ag/ZnO thin film has remarkable potential for use in environmentally-favorable applications.

Paper-Based Biosensors for COVID-19: A Review of Innovative Tools for Controlling the Pandemic

The appearance and quick spread of the new severe acute respiratory syndrome coronavirus disease, COVID-19, brought major societal challenges. Importantly, suitable medical diagnosis procedures and smooth clinical management of the disease are an emergent need, which must be anchored on novel diagnostic methods and devices. Novel molecular diagnostic tools relying on nucleic acid amplification testing have emerged globally and are the current gold standard in COVID-19 diagnosis. However, the need for widespread testing methodologies for fast, effective testing in multiple epidemiological scenarios remains a crucial step in the fight against the COVID-19 pandemic. Biosensors have previously shown the potential for cost-effective and accessible diagnostics, finding applications in settings where conventional, laboratorial techniques may not be readily employed. Paper- and cellulose-based biosensors can be particularly relevant in pandemic times, for the renewability, possibility of mass production with sustainable methodologies, and safe environmental disposal. In this review, paper-based devices and platforms targeting SARS-CoV-2 are showcased and discussed, as a means to achieve quick and low-cost PoC diagnosis, including detection methodologies for viral genomic material, viral antigen detection, and serological antibody testing. Devices targeting inflammatory markers relevant for COVID-19 are also discussed, as fast, reliable bedside diagnostic tools for patient treatment and follow-up.

Synthesis of Ag Nanoparticles-Decorated CNTs via Laser Ablation Method for the Enhancement the Photocatalytic Removal of Naphthalene from Water

Silver nanoparticles (Ag NPs) were decorated with different amounts on the exterior walls of carbon nanotubes (CNTs) by a laser ablation assisted method, especially in liquid media to be applied as a good adsorption material against naphthalene. The laser ablation time was controlled the amount of decoration Ag NPs on CNTs. The prepared nanocomposite was analyzed via different analytical techniques. Ag NPs with a small size distribution of 29 nm are uniformly decorated with spherical shape on CNTs walls. The disorder degree of tubular structure and shifting of the vibrational characteristic peaks increase with the increase in the decoration of Ag NPs. After that, the prepared samples were investigated for the removal of naphthalene. These studies of loading Ag NPs with different amounts on the surface of CNTs act as a promising material for water treatment.

Metal Oxide-Based Photocatalytic Paper: A Green Alternative for Environmental Remediation

The interest in advanced photocatalytic technologies with metal oxide-based nanomaterials has been growing exponentially over the years due to their green and sustainable characteristics. Photocatalysis has been employed in several applications ranging from the degradation of pollutants to water splitting, CO2 and N2 reductions, and microorganism inactivation. However, to maintain its eco-friendly aspect, new solutions must be identified to ensure sustainability. One alternative is creating an enhanced photocatalytic paper by introducing cellulose-based materials to the process. Paper can participate as a substrate for the metal oxides, but it can also form composites or membranes, and it adds a valuable contribution as it is environmentally friendly, low-cost, flexible, recyclable, lightweight, and earth abundant. In term of photocatalysts, the use of metal oxides is widely spread, mostly since these materials display enhanced photocatalytic activities, allied to their chemical stability, non-toxicity, and earth abundance, despite being inexpensive and compatible with low-cost wet-chemical synthesis routes. This manuscript extensively reviews the recent developments of using photocatalytic papers with nanostructured metal oxides for environmental remediation. It focuses on titanium dioxide (TiO2) and zinc oxide (ZnO) in the form of nanostructures or thin films. It discusses the main characteristics of metal oxides and correlates them to their photocatalytic activity. The role of cellulose-based materials on the systems’ photocatalytic performance is extensively discussed, and the future perspective for photocatalytic papers is highlighted.

Optimization of ZnO Nanorods Concentration in a Micro-Structured Polymeric Composite for Nanogenerators

The growing use of wearable devices has been stimulating research efforts in the development of energy harvesters as more portable and practical energy sources alternatives. The field of piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs), especially employing zinc oxide (ZnO) nanowires (NWs), has greatly flourished in recent years. Despite its modest piezoelectric coefficient, ZnO is very attractive due to its sustainable raw materials and the facility to obtain distinct morphologies, which increases its multifunctionality. The integration of ZnO nanostructures into polymeric matrices to overcome their fragility has already been proven to be fruitful, nevertheless, their concentration in the composite should be optimized to maximize the harvesters’ output, an aspect that has not been properly addressed. This work studies a composite with variable concentrations of ZnO nanorods (NRs), grown by microwave radiation assisted hydrothermal synthesis, and polydimethylsiloxane (PDMS). With a 25 wt % ZnO NRs concentration in a composite that was further micro-structured through laser engraving for output enhancement, a nanogenerator (NG) was fabricated with an output of 6 V at a pushing force of 2.3 N. The energy generated by the NG could be stored and later employed to power small electronic devices, ultimately illustrating its potential as an energy harvesting device.

Fabrication of Interconnected Plasmonic Spherical Silver Nanoparticles with Enhanced Localized Surface Plasmon Resonance (LSPR) Peaks Using Quince Leaf Extract Solution

Interconnected spherical metallic silver nanoparticles (Ag NPs) were synthesized in the current study using a green chemistry method. The reduction of silver ions to Ag NPs was carried out with low-cost and eco-friendly quince leaves. For the first time, it was confirmed that the extract solution of quince leaves could be used to perform green production of Ag NPs. Fourier transform infrared spectroscopy (FTIR) was conducted to identify the potential biomolecules that were involved in the Ag NPs. The results depicted that the biosynthesis of Ag NPs through the extract solution of quince leaf was a low-cost, clean, and safe method, which did not make use of any contaminated element and hence, had no undesirable effects. The majority of the peaks in the FTIR spectrum of quince leaf extracts also emerged in the FTIR spectrum of Ag NPs but they were found to be of less severe intensity. The silver ion reduction was elaborated in detail on the basis of the FTIR outcomes. In addition, through X-ray diffraction (XRD) analysis, the Ag NPs were also confirmed to be crystalline in type, owing to the appearance of distinct peaks related to the Ag NPs. The creation of Ag NPs was furthermore confirmed by using absorption spectrum, in which a localized surface plasmon resonance (LSPR) peak at 480 nm was observed. The LSPR peak achieved in the present work was found to be of great interest compared to those reported in literature. Field emission scanning electron microscopy (FESEM) images were used to provide the morphology and grain size of Ag NPs. It was shown from the FESEM images that the Ag NPs had interconnected spherical morphology.

Label-Free Nanosensing Platform for Breast Cancer Exosome Profiling

Breast cancer accounts for 11.6% of all cancer cases in both genders. Even though several diagnostic techniques have been developed, the mostly used are invasive, complex, time-consuming, and cannot guarantee an early diagnosis, significantly constraining the tumor treatment success rate. Exosomes are extracellular vesicles that carry biomolecules from tissues to the peripheral circulation, representing an emerging noninvasive source of markers for early cancer diagnosis. Current techniques for exosomes analysis are frequently complex, time-consuming, and expensive. Raman spectroscopy interest has risen lately, because of its nondestructive analysis and little to no sample preparation, while having very low analyte concentration/volume, because of surface enhancement signal (SERS) possibility. However, active SERS substrates are needed, and commercially available substrates come with a high cost and low shelf life. In this work, composites of commercial nata de coco to produce bacterial nanocellulose and in-situ-synthesized silver nanoparticles are tested as SERS substrates, with a low cost and green approach. Enhancement factors from 10⁴ to 10⁵ were obtained, detecting Rhodamine 6G (R6G) concentrations as low as 10^-11 M. Exosome samples coming from MCF-10A (nontumorigenic breast epithelium) and MDA-MB-231 (breast cancer) cell cultures were tested on the synthesized substrates, and the obtained Raman spectra were subjected to statistical principal component analysis (PCA). Combining PCA with Raman intravariability and intervariability in exosomal samples, data grouping with 95% confidence was possible, serving as a low-cost, green, and label-free diagnosis method, with promising applicability in clinical settings.

Ag nanoparticle decorated MnO2 flakes as flexible SERS substrates for rhodamine 6G detection

In this work, we synthesized a new kind of AgNPs/MnO₂@Al flexible substrate as a SERS substrate for the detection of analyte Rhodamine 6G (R6G), which displayed superior SERS performance with low detection concentration of 1 × 10^–6 M for R6G.