Properties of Basil and Lavender Essential Oils Adsorbed on the Surface of Hydroxyapatite

Microstructure induction of quaternary ammonium chitosan microcapsules based on magnetic field and study of their aroma release

Traditional pressure-sensitive microcapsules used in textiles face challenges of insufficient environmental friendliness in the production process and uncontrollable fragrance release. To address this issue, this study utilized quaternary ammonium chitosan and silica as wall materials to develop a magnetic aromatic microcapsule. The microstructure of the microcapsules was controlled by magnetic field induction, and its evolution pattern was investigated. After magnetic field induction, the microcapsules exhibited a trend of evolving from spherical to asymmetrical shapes, accompanied by significant changes in mechanical properties. Asymmetrical microcapsules showed higher adhesion and lower stiffness. When applied to cotton textiles, the cotton textiles treated with asymmetrical microcapsules released 63.40 % of lavender essential oil after 200 friction cycles, representing an 11.3 % improvement in release efficiency compared to regular microcapsules, indicating better mechanical stimulus responsiveness. Additionally, in antibacterial tests, aromatic cotton exhibited a 96.52 % inhibition ratio against Escherichia coli. In summary, this study explores methods to adjust the mechanical properties of microcapsules and the relationship between mechanical properties and microstructure, providing a new approach for functional textiles.

Novel Antimicrobial Agents Based on Zinc-Doped Hydroxyapatite Loaded with Tetracycline

In this paper, we present for the first time the development of zinc-doped hydroxyapatite enriched with tetracycline (ZnHApTe) powders and provide a comprehensive evaluation of their physico-chemical and biological properties. Various techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were used for the sample's complex evaluation. Moreover, the biocompatibility of zinc-doped hydroxyapatite (ZnHAp) and ZnHApTe nanoparticles was evaluated with the aid of human fetal osteoblastic cells (hFOB 1.19 cell line). The results of the biological assays suggested that these nanoparticles hold great promise as potential candidates for the future development of novel biocompatible and antimicrobial agents for biomedical applications. The antimicrobial properties of the ZnHAp and ZnHApTe nanoparticles were assessed using the standard reference microbial strains Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, and Candida albicans ATCC 10231. The results of the in vitro antimicrobial assay demonstrated that both tested materials exhibited good antimicrobial activity. Additionally, these data also indicated that the antimicrobial effects of the ZnHAp nanoparticles were intensified by the presence of tetracycline (Te). Furthermore, the results also suggested that the antimicrobial activity of the samples increased with the incubation time.

Preparation of Green Silver Nanoparticles and Eco-Friendly Polymer-AgNPs Nanocomposites: A Study of Toxic Properties across Multiple Organisms

This article focuses on the eco-friendly (green) synthesis of silver nanoparticles (AgNPs) and their incorporation into a polymer matrix. For AgNPs synthesis, Lavandula angustifolia (lavender) leaf extract was used as a reducing and stabilizing agent, and as a silver precursor, AgNO3 solution with different concentrations of silver (50, 100, 250, and 500 mg/L) was used. Prepared AgNPs colloids were characterized using UV-vis spectrophotometry, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The spherical morphology of AgNPs with an average size of 20 nm was confirmed across all samples. Further, the antimicrobial properties of the AgNPs were evaluated using the disk diffusion method on algae (Chlorella kessleri) and the well diffusion method on bacteria (Staphylococcus chromogenes, Staphylococcus aureus, and Streptococcus uberis), along with root growth inhibition tests on white mustard (Sinapis alba). Polymer composite (PVA-AgNPs) was prepared by incorporation of AgNPs into the polymer matrix. Subsequently, non-woven textiles and thin foils were prepared. The distribution of AgNPs within the nanocomposites was observed by scanning electron microscopy (SEM). Antibacterial properties of PVA-AgNPs composites were analyzed on bacteria Streptococcus uberis. It was found that not only AgNPs showed good antimicrobial properties, but toxic properties were also transferred to the PVA-AgNPs nanocomposite.

Development and characterization of a topical gel, containing lavender (Lavandula angustifolia) oil loaded solid lipid nanoparticles

Gels loaded with nanocarriers offer interesting ways to create novel therapeutic approaches by fusing the benefits of gel and nanotechnology. Clinical studies indicate that lavender oil (Lav-O) has a positive impact on accelerating wound healing properly based on its antimicrobial and anti-inflammatory effects. Initially Lav-O loaded Solid Lipid Nanoparticles (Lav-SLN) were prepared incorporating cholesterol and lecithin natural lipids and prepared SLNs were characterized. Next, a 3% SLN containing topical gel (Lav-SLN-G) was formulated using Carbopol 940. Both Lav-SLN and Lav-SLN-G were assessed in terms antibacterial effects against S. aureus. Lav-SLNs revealed a particle size of 19.24 nm, zeta potential of -21.6 mv and EE% of 75.46%. Formulated topical gel presented an acceptable pH and texture properties. Minimum Inhibitory/Bactericidal Concentration (MIC/MBC) against S. aureus for LAv-O, Lav-SLN and Lav-SLN-G were 0.12 and 0.24 mgml- 1, 0.05 and 0.19 mgml- 1 and 0.045, 0.09 mgml- 1, respectively. Therefore, SLN can be considered as an antimicrobial potentiating nano-carrier for delivery of Lav-O as an antimicrobial and anti-inflammatory agent in topical gel.

Antimicrobial Activity of Polycaprolactone Nanofiber Coated with Lavender and Neem Oil Nanoemulsions against Airborne Bacteria

The development of efficient, eco-friendly antimicrobial agents for air purification and disinfection addresses public health issues connected to preventing airborne pathogens. Herein, the antimicrobial activity of a nanoemulsion (control, 5%, 10%, and 15%) containing neem and lavender oils with polycaprolactone (PCL) was investigated against airborne bacteria, including Escherichia coli, Bacillus subtilis, and Staphylococcus aureus. Various parameters such as the physicochemical properties of the nanoemulsion, pH, droplet size, the polydispersity index (PDI), the minimum inhibitory concentration (MIC), the minimum bacterial concentration (MBC), and the color measurement of the emulsion have been evaluated and optimized. Our results showed that the antimicrobial activity of PCL combined with neem and lavender oil was found to be the highest MIC and MBC against all tested bacteria. The droplet sizes for lavender oil are 21.86-115.15 nm, the droplet sizes for neem oil are 23.92-119.15 nm, and their combination is 25.97-50.22 nm. The range of pH and viscosity of nanoemulsions of various concentrations was found to be 5.8 to 6.6 pH and 0.372 to 2.101 cP. This study highlights the potential of nanotechnology in harnessing the antimicrobial properties of natural essential oils, paving the way for innovative and sustainable solutions in the fight against bacterial contamination.

Current State of Knowledge Regarding WHO High Priority Pathogens-Resistance Mechanisms and Proposed Solutions through Candidates Such as Essential Oils: A Systematic Review

Combating antimicrobial resistance (AMR) is among the 10 global health issues identified by the World Health Organization (WHO) in 2021. While AMR is a naturally occurring process, the inappropriate use of antibiotics in different settings and legislative gaps has led to its rapid progression. As a result, AMR has grown into a serious global menace that impacts not only humans but also animals and, ultimately, the entire environment. Thus, effective prophylactic measures, as well as more potent and non-toxic antimicrobial agents, are pressingly needed. The antimicrobial activity of essential oils (EOs) is supported by consistent research in the field. Although EOs have been used for centuries, they are newcomers when it comes to managing infections in clinical settings; it is mainly because methodological settings are largely non-overlapping and there are insufficient data regarding EOs' in vivo activity and toxicity. This review considers the concept of AMR and its main determinants, the modality by which the issue has been globally addressed and the potential of EOs as alternative or auxiliary therapy. The focus is shifted towards the pathogenesis, mechanism of resistance and activity of several EOs against the six high priority pathogens listed by WHO in 2017, for which new therapeutic solutions are pressingly required.

Transfer of AgNPs' Anti-Biofilm Activity into the Nontoxic Polymer Matrix

A biological method was successfully applied to synthesize spherical silver nanoparticles (AgNPs) while using the extract of lavender (Ex-L) (lat. Lavandula angustifolia) as the reducing and stabilizing agent. The produced nanoparticles were spherical with an average size of 20 nm. The AgNPs' synthesis rate confirmed the extract's excellent ability to reduce silver nanoparticles from the AgNO₃ solution. The presence of good stabilizing agents was confirmed by the excellent stability of the extract. Nanoparticles' shapes and sizes did not change. UV-Vis absorption spectrometry, Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were used to characterize the silver nanoparticles. The silver nanoparticles were incorporated into the PVA polymer matrix by the "ex situ" method. The polymer matrix composite with AgNPs was prepared in two ways: as a composite film and nanofibers (nonwoven textile). The anti-biofilm activity of AgNPs and the ability of AgNPs to transfer toxic properties into the polymer matrix were proved.

Application of Lavender-Oil Microcapsules to Functionalized PET Fibers

Surface treatments for textile substrates have received significant attention from researchers around the world. Ozone and plasma treatments trigger a series of surface alterations in textile substrates that can improve the anchoring of other molecules or particles on these substrates. This work aims to evaluate the effect of ozone and plasma treatments on the impregnation of polymeric microcapsules containing lavender oil in polyester fabrics (PES). Microcapsules with walls of chitosan and gum arabic were prepared by complex coacervation and impregnated in PES, plasma-treated PES, and ozone-treated PES by padding. The microcapsules were characterized for their size and morphology and the surface-treated PES was evaluated by FTIR, TGA, SEM, and lavender release. The microcapsules were spherical in shape, with smooth surfaces. The FTIR analyses of the textile substrates with microcapsules showed bands referring to the polymers of the microcapsules, but not to the lavender; this was most likely because the smooth surface of the outer wall did not retain the lavender. The mass loss and the degradation temperatures measured by TGA were similar for all the ozone-treated and plasma-treated polyester samples. In the SEM images, spherical microcapsules and the impregnation of the microcapsules of larger sizes were perceived. Through the lavender release, it was observed that the plasma and ozone treatments interfered both with the amount of lavender delivered and with the control of the delivery.

Boosting the In Vivo Transdermal Bioavailability of Asenapine Maleate Using Novel Lavender Oil-Based Lipid Nanocapsules for Management of Schizophrenia

Lipid nanocapsules (LNCs) are promising for transdermal drug delivery due to their higher permeability-enhancing effects compared to polymeric nanoparticles. Lavender oil is an essential oil consisting of several terpenes (primarily linalool and linalyl acetate) known for their profound permeation-enhancing action. In the present work, we successfully encapsulated asenapine maleate (a second-generation antipsychotic that is highly metabolized by the liver, reducing its oral bioavailability) into biocompatible LNCs for transdermal application using a novel oily phase, i.e., lavender oil (LO-LNCs). A comparative study was conducted to determine the effects of different oily phases (i.e., Miglyol® 812, Labrafil® M1944CS, and Labrafac™ PG) on the LNCs. Surfactant types (Kolliphor® HS15, Kolliphor® EL and Tween80) and oil:surfactant ratios were studied. Blank and asenapine-loaded LNCs were optimized for particle size, polydispersity index, zeta potential, drug content and ex vivo skin permeation. Lavender oil and Labrafil® showed smaller vesicular sizes, while LO-LNCs increased the permeation of ASP across rat skin. In vivo pharmacokinetics revealed that LO-LNCs could increase the ASP Cmax via transdermal application by fourfold compared to oral suspension. They increased the bioavailability of ASP by up to 52% and provided sustained release for three days. The pharmacokinetic profile of the LO-LNCs was compared to ASP-loaded invasomes (discussed in a previous study) to emphasize LNCs' transdermal delivery behavior.

Physicochemical Characterization and Prospecting Biological Activity of Some Authentic Transylvanian Essential Oils: Lavender, Sage and Basil

Essential oils are a category of agro-based industrial products experiencing increasing demand. In this research, three essential oils obtained by steam distillation from lavender, sage and basil plants cultivated in temperate continental conditions of Transylvania were investigated for chemical composition, physical characteristics and biological activity (antimicrobial and cytotoxic effect on cancer cell lines). The number of identified compounds varied: 38 for lavender, 29 for sage essential oil and 41 for basil. The volatile profile was dominated by terpenes and terpenoids (>80%). Major components were beta-linalool and linalool acetate in lavender essential oil; thujones and camphor in sage essential oil; beta-linalool, thujone, camphor and eucalyptol in basil essential oil. Refractive index of the essential oils was lowest for lavender and highest for sage. Antibacterial activity was strongest for basil, moderate for lavender and weakest for sage essential oil. The most active on both colon adenocarcinoma (Caco-2) and ovary carcinoma (A2780) was sage essential oil.

Novel Dextran Coated Cerium Doped Hydroxyapatite Thin Films

Dextran coated cerium doped hydroxyapatite (Ca10-xCex(PO4)6(OH)2), with x = 0.05 (5CeHAp-D) and x = 0.1 (10CeHAp-D) were deposited on Si substrates by radio frequency magnetron sputtering technique for the first time. The morphology, composition, and structure of the resulting coatings were examined by scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDX), atomic force microscopy (AFM), metallographic microscopy (MM), Fourier transform infrared spectroscopy (FTIR), and glow discharge optical emission spectroscopy (GDOES), respectively. The obtained information on the surface morphologies, composition and structure was discussed. The surface morphologies of the CeHAp-D composite thin films are smooth with no granular structures. The constituent elements of the CeHAp-D target were identified. The results of the FTIR measurements highlighted the presence of peaks related to the presence of ν1, ν3, and ν4 vibration modes of (PO43-) groups from the hydroxyapatite (HAp) structure, together with those specific to the dextran structure. The biocompatibility assessment of 5CeHAp-D and 10CeHAp-D composite coatings was also discussed. The human cells maintained their specific elongated morphology after 24 h of incubation, which confirmed that the behavior of gingival fibroblasts and their proliferative capacity were not disturbed in the presence of 5CeHAp-D and 10CeHAp-D composite coatings. The 5CeHAp-D and 10CeHAp-D coatings' surfaces were harmless to the human gingival fibroblasts, proving good biocompatibility.

Loaded n-Hydroxyapatite/SSG 3D Scaffolds as a Drug Delivery System of Nigella sativa Fractions for the Management of Local Antibacterial Infections

As a result of their close similarities to the inorganic mineral components of human bone, hydroxyapatite nanoparticles (n-HAp) are widely used in biomedical applications and for the elaboration of biocompatible scaffold drug delivery systems for bone tissue engineering. In this context, a new efficient and economic procedure was used for the consolidation of n-HAp in the presence of various Nigella sativa (NS) fractions at a near-room temperature. The research conducted in the present study focuses on the physicochemical properties of loaded n-HAp 3D scaffolds by NS fractions and the in vitro antibacterial activity against Gram-negative (Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Klebsiella pneumoniae ATCC 27853), and Gram-positive (Staphylococcus aureus ATCC 29213, Enterococcus faecalis ATCC 700603) bacteria. In order to better understand the effect of the inserted fractions on the HAp molecular structure, the elaborated samples were subject to Fourier transform infrared (FTIR) and X-ray diffraction (XRD) spectroscopic analyses. In addition, the morphological investigation by scanning electron microscope (SEM) of the loaded n-HAp 3D scaffolds demonstrated the presence of a porous structure, which is generally required in stimulating bone regeneration. Furthermore, the fabricated 3D composites exhibited significant antibacterial activity against all tested bacteria. Indeed, MIC values ranging from 5 mg/mL to 20 mg/mL were found for the HAp-Ethanol fraction (HAp-Et) and HAp-Hexane fraction (HAp-Hex), while the HAp-Aqueous fraction (HAp-Aq) and HAp-Methanol fraction (HAp-Me) showed values between 20 mg/mL and 30 mg/mL on the different strains. These results suggest that the HAp-NS scaffolds were effective as a drug delivery system and have very promising applications in bone tissue engineering.

Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy coupled with chemometric analysis for detection and quantification of adulteration in lavender and citronella essential oils

INTRODUCTION

The growing consumer interest in "naturals" led to an increased application of essential oils (EOs). The market outbreak induced the intensification of EO adulterations, which could affect their quality.

OBJECTIVES

Nowadays, little is known about the illegal practice of adulteration of EOs with vegetable oils. Therefore, the application of mid-infrared spectroscopy coupled with chemometrics was proposed for the detection of EO counterfeits.

MATERIALS AND METHODS

Two EOs, three seed oils, and their mixtures were selected to build the adulteration model. EO-adulterant mixtures for model calibration and validation were analyzed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. The spectral data were analyzed with principal component analysis (PCA) and partial least-squares (PLS) regression.

RESULTS

PCA allowed the discrimination of the EO and adulterant percentages by explaining 97.47% of the total spectral variance with two principal components. A PLS regression model was generated with three factors explaining 97.73% and 99.69% of the total variance in X and Y, respectively. The root mean square error of calibration and the root mean square error of cross-validation were 0.918 and 1.049, respectively. The root mean square error of prediction value obtained from the external validation set was 1.588 and the coefficients of determination R² _CAL and R² _CV were 0.997 and 0.996, respectively.

CONCLUSIONS

The results highlighted the robustness of the developed method in quantifying counterfeits in the range from 0 to 50% of adulterants, disregarding the type of EO and adulterant employed. The present work offers a research advance and makes an important impact in phytochemistry, revealing an easily applicable method for EO quality assessment.

Therapeutic benefits of natural oils along with permeation enhancing activity

The skin is the largest organ of the integumentary system with a multifunctional purpose to protect the body from heat and microbes, regulate body temperature, and act as a sensory organ. A topical dosage form applied on the skin will have to cross the stratum corneum, which would then allow the dosage form to traverse the subsequent layers of the skin. The drug with poor solubility and short half-life would serve as an ideal candidate for its delivery via the transdermal route. This review reports the role of natural oils in enhancing the permeation of drugs through skin as they possess different features like natural origin, favorable penetration enhancement, and partitioning action in the skin. Chemical penetration enhancers have been used widely but are associated with toxicities. Thus, more research should be channelized in the area of extraction of oils from natural sources, along with their active constituents, which can serve as therapeutic alternatives to various disorders and diseases. Natural oils are obtained from leaves, fruits, flowers, seeds, bark, and roots, which have a therapeutic potential as well as penetration enhancing activity. The demerits of oral drug delivery include degradation of drugs in the gastrointestinal tract, addition of taste masking, and coating of tablets, which can be overcome by delivering the drug via the transdermal route. Natural oil contains lipids, flavonoids, and terpenes, which play a significant role in anti-inflammatory and penetration enhancing activity.

Combination Therapy Involving Lavandula angustifolia and Its Derivatives in Exhibiting Antimicrobial Properties and Combatting Antimicrobial Resistance: Current Challenges and Future Prospects

Antimicrobial resistance (AMR) has been identified as one of the biggest health threats in the world. Current therapeutic options for common infections are markedly limited due to the emergence of multidrug resistant pathogens in the community and the hospitals. The role of different essential oils (EOs) and their derivatives in exhibiting antimicrobial properties has been widely elucidated with their respective mechanisms of action. Recently, there has been a heightened emphasis on lavender essential oil (LEO)’s antimicrobial properties and wound healing effects. However, to date, there has been no review published examining the antimicrobial benefits of lavender essential oil, specifically. Previous literature has shown that LEO and its constituents act synergistically with different antimicrobial agents to potentiate the antimicrobial activity. For the past decade, encapsulation of EOs with nanoparticles has been widely practiced due to increased antimicrobial effects and greater bioavailability as compared to non-encapsulated oils. Therefore, this review intends to provide an insight into the different aspects of antimicrobial activity exhibited by LEO and its constituents, discuss the synergistic effects displayed by combinatory therapy involving LEO, as well as to explore the significance of nano-encapsulation in boosting the antimicrobial effects of LEO; it is aimed that from the integration of these knowledge areas, combating AMR will be more than just a possibility.

Multifunctional Hydroxyapatite Coated with Arthemisia absinthium Composites

There is significant research showing that essential oils extracted from the plants have antibacterial effects. The purpose of this study was to develop a biocomposite based on hydroxyapatite coated with Artemisia absinthium essential oil and to highlight its antibacterial activity. Therefore, present studies are aimed at developing new materials combining hydroxyapatite with Artemisia absinthium essential oil, in order to avoid postoperative infections. The purpose of this work is to highlight the antimicrobial properties of the Artemisia absinthium essential oil-hydroxyapatite composites obtained by a simple method and at low costs. The structural properties and antimicrobial efficiency of the Artemisia absinthium essential oil-hydroxyapatite composite have been studied. The samples based on Artemisia absinthium essential oil analyzed in this study showed that wormwood essential oil presented the highest efficacy against the fungal strain of C. parapsilosis. It has been shown that wormwood essential oil has a strong antimicrobial effect against the microbial strains tested in this study. Furthermore, the antimicrobial properties of the biocomposites based on hydroxyapatite and essential oil are due to the presence of the essential oil in the samples.

Essential oil-incorporated carbon nanotubes filters for bacterial removal and inactivation

In this study, essential oils (EO)-incorporated multi-walled carbon nanotubes (MWCNTs) filters were developed for achieving dual functions in effective removing bacteria from aqueous solutions and inactivating bacteria cells captured on the filters. Tea tree essential oil (TTO), lemon essential oil (LEO), and TTO-LEO-mixture were coated on MWCNTs filters with different MWCNTs loadings ranging from 3 mg to 6 mg. MWCNTs filters with 6.0 mg MWCNTs showed complete removal (100%) of E. coli cells from PBS buffer with 6.35 log10 decrease of cell numbers. TTO, LEO, and TTO/LEO Mix (1:1) coatings at the volume of 50 μL on MWCNTs filters achieved bacterial removal rates of >98%, and highly effective inactivation efficiency. TTO coatings had the highest antimicrobial efficacies than LEO and Mix coatings, MWCNTs filters with 50 μL TTO coating showed 100% inhibitory rate of the captured bacteria on the filter surfaces. Those captured but survived cells on filters with less TTO coating (20μL) significantly reduced their salt tolerances to 30 and 40 g/L NaCl in LB agar, and became less salt tolerance with longer incubation time on the filters. The developed TTO-MWCNTs filters had much higher antimicrobial efficacies than the filters with dual functions developed previously.

Peppermint Essential Oil-Doped Hydroxyapatite Nanoparticles with Antimicrobial Properties

This study aimed at developing an antimicrobial material based on hydroxyapatite (HAp) and peppermint essential oil (P-EO) in order to stimulate the antimicrobial activity of hydroxyapatite. The molecular spectral features and morphology of the P-EO, HAp and hydroxyapatite coated with peppermint essential oil (HAp-P) were analyzed using Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The coating of the HAp with the P-EO did not affect the ellipsoidal shape of the nanoparticles. The overlapping of IR bands of P-EO and HAp in the HAp-P spectrum determined the formation of the broad molecular bands that were observed in the spectral regions of 400-1000 cm-1 and 1000-1200 cm-1. The antibacterial activity of the P-EO, HAp and HAp-P were also tested against different Gram-positive bacteria (methicillin-resistant Staphylococcus aureus (MRSA) 388, S. aureus ATCC 25923, S. aureus ATCC 6538, E. faecium DSM 13590), Gram-negative bacteria (Escherichia coli ATCC 25922, E. coli C5, P. aeruginosa ATCC 27853, P. aeruginosa ATCC 9027) and a fungal strain of Candida parapsilosis. The results of the present study revealed that the antimicrobial activity of HAp-P increased significantly over that of HAp.

Optimisation of the microencapsulation of lavender oil by spray drying

Background: Lavender oil consists of around 100 components and is susceptible to volatilisation and degradation reactions. Aim: Microencapsulate lavender oil by spray drying using a biocompatible polymeric blend of gum acacia and maltodextrin to protect the oil components. Effect of total polymer content, oil loading, gum acacia, and maltodextrin proportions on the size, yield, loading, and encapsulation efficiency of the microparticles was investigated. Methods: Morphology and oil localisation within microparticles were assessed by confocal laser scanning electron microscope. Structural preservation and compatibility were assessed using Fourier transform infra-red spectroscopy, differential scanning calorimetry, and gas chromatography-mass spectrometry. Results: Lavender microparticles of size 12.42 ± 1.79 µm prepared at 30 w/w% polymer concentration, 16.67 w/w% oil loading, and 25w/w% gum acacia showed maximum oil protection at high loading (12 mg w/w%), and encapsulation efficiency (77.89 w/w%). Conclusion: Lavender oil was successfully microencapsulated into stable microparticles by spray drying using gum acacia/maltodextrin polymeric blend.