New Insights on the Photodegradation of Caffeine in the Presence of Bio-Based Substances-Magnetic Iron Oxide Hybrid Nanomaterials

Automated H2O2 monitoring during photo-Fenton processes using an Arduino self-assembled automatic system

A cheap and easy to use Arduino self-assembled automatic system was employed to continuously monitor the hydrogen peroxide consumption during the photo-Fenton degradation of caffeine, selected as model target compound. The automatic system made it possible to measure the H2O2 concentration in the reaction cell via a colorimetric reaction and to take samples for HPLC analysis minimising the operator manual intervention and exposure to UV radiation. The obtained results were compared in terms of LOD and LOQ with H2O2 measurements manually performed using UV-Vis spectrophotometry, evidencing better analytical performance when using the automatic system; LOD and LOQ were respectively 0.032 mM and 0.106 mM for the automatic system against 0.064 mM and 0.213 mM for UV-Vis spectrophotometry. Furthermore, the photo-Fenton treatment was optimised by means of a Design of Experiments (DoE) investigating the effect of added H2O2 concentration, iron concentration and caffeine initial concentration on system performances. The use of the automatic device for such monitoring provided several advantages: automation (with consequent reduction of the workload), measurement increased precision, reduced reagents consumption and waste production in agreement with the principles of Green Analytical Chemistry.

Contribution of photocatalytic and Fenton-based processes in nanotwin structured anodic TiO2 nanotube layers modified by Ce and V

In the present work, nanotwin structured TiO₂ nanotube (TNT) layers are prepared by the electrochemical anodization technique to form the anatase phase and by surface modification via spin-coating of Ce and V precursors to form Ce-TNT and V-TNT, respectively. The surface and cross-sectional images by SEM revealed that the nanotubes have an average diameter of ∼130 nm and a length of ∼14 μm. In addition, the TEM images revealed the nanotwin structures of the nanotubes, especially the anatase (001) and (112) twin surfaces, that increase the transport of photogenerated charges. The photoinduced degradation of caffeine (CAF) by TNT, Ce-TNT, and V-TNT led to a degradation extent of 16%, 26% and 33%, respectively, whereas it increased to 26%, 38%, and 46% in the presence of H₂O₂, owing to the involvement of Fenton-based processes (in addition to photocatalysis). The effect of the Fenton-based processes accounts for about 10% of the total degradation extent of CAF. Finally, the mechanism of the photoinduced degradation of CAF was investigated. The main oxidative species were the hydroxyl radicals, and the better efficiency of V-TNT over Ce-TNT and TNT was ascribed to its negative surface, thus improving the interactions with CAF.

Biowaste- and nature-derived (nano)materials: Biosynthesis, stability and environmental applications

Due to the environmental pollution issues and the supply of drinking/clean water, removal of both inorganic and organic (particularly dyes, nitroarenes, and heavy metals) to non-dangerous products and useful compounds are very important transformations. The deployment of sustainable and eco-friendly nanomaterials with exceptional structural and unique features such as high efficiency and stability/recyclability, high surface/volume ratio, low-cost production routes has become a priority; nonetheless, numerous significant challenges/restrictions still remained unresolved. The immobilization of green synthesized metal nanoparticles (NPs) on the natural materials and biowaste generated templates have been analyzed widely as a greener approach due to their environmentally friendly preparation methods, earth-abundance, cost-effectiveness with low energy consumption, biocompatibility, as well as adjustability in various cases of biomolecules as bioreducing agents. Natural and biowaste materials are widely considered as important sources to fabricate greener and biosynthesized types of metal, metal oxide, and metal sulfide nanomaterials using plant extracts. Integrating green synthesized nanoparticles with various biotemplates offers new practical composites for mitigating environmental challenges. In this review, degradation of dyes, reduction of toxic nitrophenols, absorption of heavy metals, and other hazardous/toxic environmental pollutants from contaminated water bodies using biowaste- and nature-derived nanomaterials are highlighted.

Humic-Like Substances as Auxiliaries to Enhance Advanced Oxidation Processes

The application of humic-like substances (HLSs) in advanced oxidation processes for wastewater treatment is summarized in this work. HLSs share important characteristics with humic substances, and they can be isolated from different wastes using procedures that are related with their pH-dependent solubility. They are able to generate, upon irradiation, reactive species such as hydroxyl radicals and singlet oxygen or triplet excited states. Although photochemical removal of pollutants can be reached by HLSs, in general, irradiation times are very long. HLSs are good metal-complexing agents, and the Fe-HLS complex is able to participate in (photo)-Fenton-like processes at mild pH, preventing iron deactivation. Finally, novel hybrid materials with environmental applications have been synthesized using HLSs; in some cases, they also contain iron oxides, which allow a better separation but also the ability to drive heterogeneous (photo)-Fenton processes.

The "Lab4treat" Outreach Experience: Preparation of Sustainable Magnetic Nanomaterials for Remediation of Model Wastewater

The Lab4treat experience has been developed to demonstrate the use of magnetic materials in environmental applications. It was projected in the frame of the European project Mat4Treat, and it was tested several times in front of different audiences ranging from school students to the general public in training and/or divulgation events. The experience lends itself to discuss several aspects of actuality, physics and chemistry, which can be explained by modulating the discussion depth level, in order to meet the interests of younger or more experienced people and expand their knowledge. The topic is relevant, dealing with the recycling of urban waste and water depollution. The paper is placed within the field of water treatment for contaminant removal; therefore, a rich collection of recent (and less recent) papers dealing with magnetic materials and environmental issues is described in the Introduction section. In addition, the paper contains a detailed description of the experiment and a list of the possible topics which can be developed during the activity. The experimental approach makes the comprehension of scientific phenomena effective, and, from this perspective, the paper can be considered to be an example of interactive teaching.

PFAS Degradation in Ultrapure and Groundwater Using Non-Thermal Plasma

Perfluoroalkyl substances (PFAS) represent one of the most recalcitrant class of compounds of emerging concern and their removal from water is a challenging goal. In this study, we investigated the removal efficiency of three selected PFAS from water, namely, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and pefluorooctanesulfonic acid (PFOS) using a custom-built non-thermal plasma generator. A modified full factorial design (with 2 levels, 3 variables and the central point in which both quadratic terms and interactions between couple of variables were considered) was used to investigate the effect of plasma discharge frequency, distance between the electrodes and water conductivity on treatment efficiency. Then, the plasma treatment running on optimized conditions was used to degrade PFAS at ppb level both individually and in mixture, in ultrapure and groundwater matrices. PFOS 1 ppb exhibited the best degradation reaching complete removal after 30 min of treatment in both water matrices (first order rate constant 0.107 min^-1 in ultrapure water and 0.0633 min^-1 in groundwater), while the degradation rate of PFOA and PFHxA was slower of around 65% and 83%, respectively. During plasma treatment, the production of reactive species in the liquid phase (hydroxyl radical, hydrogen peroxide) and in the gas phase (ozone, NO_x) was investigated. Particular attention was dedicated to the nitrogen balance in solution where, following to NO_x hydrolysis, total nitrogen (TN) was accumulated at the rate of up to 40 mg^N L^-1 h^-1.

Occurrence, fate, persistence and remediation of caffeine: a review

Pharmaceutical and personal care products (PPCPs) have gained attention in recent years due to their continuous discharge in natural waters. Their persistence in the environment has impacted flora, fauna and human being worldwide. One of the most common PPCPs is caffeine (1, 3, 7-trimethylxanthine) which acts as a stimulant to the central nervous system in humans and is found in nature in about 60 plant species, especially in coffee, tea and cacao plants. Here we discuss the evidence with respect to caffeine occurrence, its persistence and remediation in light of increasing knowledge and the impact of caffeine on the environment. Daily intake of caffeine around the world is found to increase due to the frequent introduction of new caffeinated beverages as well as increased consumption of coffee, tea and carbonated soft drinks, which has led to increase in its concentration in water bodies including agricultural soil. The caffeine concentration in different water system, studied by various authors is also described. Diverse effects of the use of caffeine on several organisms including humans are also briefly presented. Therefore, urgent attention for the removal of caffeine and its derivatives is the need of the hour. Various methods described in literature for caffeine degradation/removal is also presented. Another widely used technique in environmental remediation is molecular imprinting (MIP); however, only few MIPs have been demonstrated for caffeine which is also discussed. Regular monitoring can be useful to control toxic effects of caffeine. Graphical abstract.

Magnetic Materials and Systems: Domain Structure Visualization and Other Characterization Techniques for the Application in the Materials Science and Biomedicine

Magnetic structures have attracted a great interest due to their multiple applications, from physics to biomedicine. Several techniques are currently employed to investigate magnetic characteristics and other physicochemical properties of magnetic structures. The major objective of this review is to summarize the current knowledge on the usage, advances, advantages, and disadvantages of a large number of techniques that are currently available to characterize magnetic systems. The present review, aiming at helping in the choice of the most suitable method as appropriate, is divided into three sections dedicated to characterization techniques. Firstly, the magnetism and magnetization (hysteresis) techniques are introduced. Secondly, the visualization methods of the domain structures by means of different probes are illustrated. Lastly, the characterization of magnetic nanosystems in view of possible biomedical applications is discussed, including the exploitation of magnetism in imaging for cell tracking/visualization of pathological alterations in living systems (mainly by magnetic resonance imaging, MRI).

Use of Low-Cost Magnetic Materials Containing Waste Derivatives for the (Photo)-Fenton Removal of Organic Pollutants

Hybrid magnetite/maghemite nanoparticles (MNP) coated with waste-sourced bio-based substances (BBS) were synthesized and studied for the degradation of phenol, chosen as a model pollutant, in water. A systematic study was undertaken in order to rationalize MNP-BBS behavior and optimize their performance. The effect of experimental parameters, such as light irradiation, addition of hydrogen peroxide, and the ratio between hydrogen peroxide and MNP-BBS concentrations, was studied. The generation of hydroxyl radicals was assessed, and the recovery and re-cycle of the material was investigated. Our results indicate that phenol degradation could be attained by both Fenton and photo-Fenton processes, with higher efficiency in dark condition and in the presence of a suitable amount of hydrogen peroxide. Evidence was obtained for the roles of iron ions leached from the materials as well as of organic matter released in the solution upon partial photodegradation of the organic coating. The reusability tests indicated a lower but still valid performance of the material. Optimization of the experimental conditions was performed to achieve the highest efficiency in substrate degradation, and fundamental insights into the mechanism of the MNP-BBS Fenton-like reaction were obtained.

Special Issue: Novel Photoactive Materials

Photoactivity represents the ability of a material to activate when interacting with light. It can be declined in many ways, and several functionalities arising from this behavior of materials can be exploited, all leading to positive repercussions on our environment. There are several classes of effects of photoactivity, all of which have been deeply investigated in the last few decades, allowing researchers to develop more and more efficient materials and devices. The special issue “Novel Photoactive Materials” has been proposed as a means to present recent developments in the field; for this reason the articles included touch different aspects of photoactivity, from photocatalysis to photovoltaics to light emitting materials, as highlighted in this editorial.